IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
RZ/G2L interrupt chips require that the interrupt is masked before changing
the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge
trigger type it is required to clear the interrupt status register in order
to avoid spurious interrupts.
The current implementation fails to do either of that and therefore is
prone to generate spurious interrupts when setting the trigger type.
Address this by:
- Ensuring that the interrupt is masked at the chip level across the
update for the TINT chip
- Clearing the interrupt status register after updating the trigger mode
for edge type interrupts
[ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as
the set_type() callback is always called with interrupts disabled. ]
Fixes: 3fed09559c ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by
removing redundant priv local variable.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by
removing redundant priv and hw_irq local variables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant
interrupt cause bit in the TSCR register by writing to it.
This write is not sufficient because the write is posted and therefore not
guaranteed to immediately clear the bit. Due to that delay the CPU can
raise the just handled interrupt again.
Prevent this by reading the register back which causes the posted write to
be flushed to the hardware before the read completes.
Fixes: 3fed09559c ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second
check passes even though AIA provides 64 interrupts. Adjust the condition to
only check the custom range for interrupts outside the standard range, and
adjust the standard range when AIA is available.
Fixes: 3c46fc5b55 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Fixes: 678c607ecf ("irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240312212813.2323841-1-samuel.holland@sifive.com
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
- Core:
- Make affinity changes immediately effective for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over the
thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so the
sparse and non-sparse mode share more code.
- Drivers:
- A set of conversions to platform_drivers::remove_new() which gets rid
of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=AbVv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
Use riscv_intc_aia_irq() as the low-level interrupt handler instead of the
existing riscv_intc_irq() default handler to make demultiplexing work
correctly.
Also print "using AIA" in the INTC boot banner when AIA is available.
Fixes: 3c46fc5b55 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226040746.1396416-2-apatel@ventanamicro.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/0bdce86b50e5aa50cffbc4add332cbfbad87521e.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/ac551b89025bafadce05102b94596f8cd3564a32.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1a80e31525d0b02063d2ff1baaaa5e87418f54b6.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/2d367ab738ed2e4cf58cffc10d64b0cbe8a1322c.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6dc03cf63382d24f954c167aaa988f8e31d6b89d.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/071057cfdc0bc52c574f74156b410c0337adb69c.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/df977ad4c02ff913b01cdd6c348e7fae3e08e651.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/64c2f79760c53f29651e7126418c407ff699317d.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1e7143ca68ff0715e0f954504e750fc92e8c6d80.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/4c852a3359aa06bedcf3a10f3fd8c1e008cc5a3a.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/c0e5afe62256860150d25bcf644f2b8d62794c86.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/edeee074956dd943d3c67da894a01dc5f0d33bd7.1703284359.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/472fc6f6bcd54b73f8af206d079a80cb8744d0ca.1703284359.git.u.kleine-koenig@pengutronix.de
The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
Add support for #1 and #2 described above in the RISC-V intc driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-9-apatel@ventanamicro.com
The SiFive PLIC driver needs to know the number of interrupts and contexts
to complete initialization. Parse these details early in plic_probe() to
avoid unnecessary memory allocations and register mappings if these details
are not available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-7-apatel@ventanamicro.com
The SiFive PLIC contexts should not be left dangling if irqdomain creation
fails because plic_starting_cpu() can crash accessing unmapped registers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-6-apatel@ventanamicro.com
The RISC-V INTC irqdomain is always the parent irqdomain of SiFive PLIC
so use riscv_get_intc_hwnode() to get the parent fwnode similar to other
RISC-V drivers which use local interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-5-apatel@ventanamicro.com
The PLIC driver does not require very early initialization so convert
it into a platform driver.
After conversion, the PLIC driver is probed after CPUs are brought-up
so setup cpuhp state after context handler of all online CPUs are
initialized otherwise PLIC driver crashes for platforms with multiple
PLIC instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-2-apatel@ventanamicro.com
Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.
To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.
Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,
cpu0: cpu@0 {
compatible = "andestech,ax45mp", "riscv";
...
cpu0-intc: interrupt-controller {
#interrupt-cells = <0x01>;
compatible = "andestech,cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240222083946.3977135-4-peterlin@andestech.com
Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.
To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-3-peterlin@andestech.com
The Amlogic-T7 SoCs support 12 GPIO IRQ lines compared with previous
serial chips and have something different, details are as below.
IRQ Number:
- 156 1 pin on bank TESTN
- 155:148 8 pins on bank H
- 147:129 19 pins on bank Y
- 128:115 14 pins on bank M
- 114:91 24 pins on bank T
- 90:77 14 pins on bank Z
- 76:70 7 pins on bank E
- 69:57 13 pins on bank D
- 56:40 17 pins on bank W
- 39:20 20 pins on bank X
- 19:13 7 pins on bank C
- 12:0 13 pins on bank B
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240222074640.1866284-3-huqiang.qin@amlogic.com
The GIC/ITS code is designed to ensure to pick up any preallocated LPI
tables on the redistributors, as enabling LPIs is a one-way switch. There
is no such restriction for vLPIs, and for GICv4.1 it is expected to
allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a
redistributor in cpu_init_lpis() the early return for preallocated RD
tables skips straight past the GICv4 setup. This all comes to a head when
trying to kexec() into a new kernel, as the new kernel silently fails to
set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always
initializes GICv4 on the way out, even if the other RD tables were
preallocated.
Fixes: 6479450f72 ("irqchip/gic-v4: Fix occasional VLPI drop")
Reported-by: George Cherian <gcherian@marvell.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(),
but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL.
This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and
unconditionally hand a NULL pointer to of_platform_device_create() to
fix this.
Fixes: fea087fc29 ("irqchip/mbigen: move to use bus_get_dev_root()")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com
Drop one extraneous struct member to quieten a warning:
drivers/irqchip/irq-vic.c:73: warning: Excess struct member 'parent_irq' description in 'vic_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240221064104.7863-1-rdunlap@infradead.org
The removal of the paremeter count restriction in the core code to allow
pure domain token based select() decisions broke the IMX intmux select
callback as that unconditioally expects that there is a parameter.
Add the missing check for zero parameter count and the token match.
Fixes: de1ff306dc ("genirq/irqdomain: Remove the param count restriction from select()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ttm3ikok.ffs@tglx
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021 ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
Currently the irqdomain select callback is only invoked when the parameter
count of the fwspec arguments is not zero. That makes sense because then
the match is on the firmware node and eventually on the bus_token, which is
already handled in the core code.
The upcoming support for per device MSI domains requires to do real bus
token specific checks in the MSI parent domains with a zero parameter
count.
Make the gic-v3 select() callback handle that case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240127161753.114685-2-apatel@ventanamicro.com
When updating the affinity of a VPE, the VMOVP command is currently skipped
if the two CPUs are part of the same VPE affinity.
But this is wrong, as the doorbell corresponding to this VPE is still
delivered on the 'old' CPU, which screws up the balancing. Furthermore,
offlining that 'old' CPU results in doorbell interrupts generated for this
VPE being discarded.
The harsh reality is that VMOVP cannot be elided when a set_affinity()
request occurs. It needs to be obeyed, and if an optimisation is to be
made, it is at the point where the affinity change request is made (such as
in KVM).
Drop the VMOVP elision altogether, and only use the vpe_table_mask
to try and stay within the same ITS affinity group if at all possible.
Fixes: dd3f050a21 (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP)
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.
Fixes: 9585a495ac ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
Although the GICv3 code base has gained some handling of systems failing to
handle the shareability attributes, the GICv4 side of things has been
firmly ignored.
This is unfortunate, as the new recent addition of the "dma-noncoherent" is
supposed to apply to all of the GICR tables, and not just the ones that are
common to v3 and v4.
Add some checks to handle the VPROPBASE/VPENDBASE shareability and
cacheability attributes in the same way we deal with the other GICR_BASE
registers, wrapping the flag check in a helper for improved readability.
Note that this has been found by inspection only, as I don't have access to
HW that suffers from this particular issue.
Fixes: 3a0fff0fb6 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
ida_alloc() and ida_free() should be used instead of the deprecated
ida_simple_get() and ida_simple_remove().
The upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. Adjust the code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/3b472b0e7edf6e483b8b255cf8d1cb0163532adf.1705222332.git.christophe.jaillet@wanadoo.fr
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm7038_l1_cpu" and this structure
ends in a flexible array:
struct bcm7038_l1_cpu {
void __iomem *map_base;
u32 mask_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and more safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240209183128.10273-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm6345_l1_cpu" and this structure
ends in a flexible array:
struct bcm6345_l1_cpu {
[...]
u32 enable_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to do
the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240209181600.9472-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
During suspend all CPUs except CPU0 are hot-unpluged and all active
interrupts are migrated to CPU0.
On resume eiointc_router_init() affines all interrupts to CPU0, so the
subsequent explicit interrupt affinity restore is redundant.
Remove it.
[ tglx: Rewrote changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240130082722.2912576-4-maobibo@loongson.cn
eiointc_irq_dispatch() iterates over the pending bit registers of the
interrupt controller and evaluates the result even if there is no interrupt
pending in a particular 64bit chunk.
Skip handling and especially the pointless write back for clearing the
non-pending bits if a chunk is empty.
[ tglx: Massaged changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-3-maobibo@loongson.cn
devm_ioremap() doesn't return error pointers, it returns NULL on error.
Update the check accordingly.
Fixes: 221b110d87 ("irqchip/qcom-mpm: Support passing a slice of SRAM as reg space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/22e1f4de-edce-4791-bd2d-2b2e98529492@moroto.mountain
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a
pointer. Older compilers treat that as a forward declaration and due to
assignment of a void pointer there is no warning emitted. As the variable
is then handed in as a void pointer argument to irq_domain_set_info() the
code is functional.
Use struct eiointc_priv instead.
[ tglx: Rewrote changelog ]
Fixes: dd281e1a1a ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
