IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 18a434f32fa61b3fda8ddcd9a63d5274569c6a41 upstream.
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13a5b21197587a3d9cac9e1a00de9b91526a55e4 upstream.
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e7914eb1dae377b8e6de59c96b0653aacb47646 upstream.
Remove sound controls in hda_unbind to make
module loadable after module unload.
Add a driver specific struct (tas2781_hda) to store
the controls.
This patch depends on patch:
ALSA: hda/tas2781: do not use regcache
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/362aa3e2f81b9259a3e5222f576bec5debfc5e88.1703204848.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dad45f4d28977bd1948973107cf325d431e5b7e upstream.
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Acked-by: Mark Brown <broonie@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1997b3cb4217b09e49659b634c94da47f0340409 upstream.
The dns_resolver_preparse() function has a check on the size of the
payload for the basic header of the binary-style payload, but is missing
a check for the size of the V1 server-list payload header after
determining that's what we've been given.
Fix this by getting rid of the the pointer to the basic header and just
assuming that we have a V1 server-list payload and moving the V1 server
list pointer inside the if-statement. Dealing with other types and
versions can be left for when such have been defined.
This can be tested by doing the following with KASAN enabled:
echo -n -e '\x0\x0\x1\x2' | keyctl padd dns_resolver foo @p
and produces an oops like the following:
BUG: KASAN: slab-out-of-bounds in dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
Read of size 1 at addr ffff888028894084 by task syz-executor265/5069
...
Call Trace:
dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
__key_create_or_update+0x453/0xdf0 security/keys/key.c:842
key_create_or_update+0x42/0x50 security/keys/key.c:1007
__do_sys_add_key+0x29c/0x450 security/keys/keyctl.c:134
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x62/0x6a
This patch was originally by Edward Adam Davis, but was modified by
Linus.
Fixes: b946001d3bb1 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry")
Reported-and-tested-by: syzbot+94bbb75204a05da3d89f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/0000000000009b39bc060c73e209@google.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jeffrey E Altman <jaltman@auristor.com>
Cc: Wang Lei <wang840925@gmail.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Steve French <sfrench@us.ibm.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b20712e853305cbd04673f02b7e52ba5b12c11a9 upstream.
This reverts commit b28ff7a7c3245d7f62acc20f15b4361292fe4117.
The commit introduced P2SB device scan and resource cache during the
boot process to avoid deadlock. But it caused detection failure of
IDE controllers on old systems [1]. The IDE controllers on old systems
and P2SB devices on newer systems have same PCI DEVFN. It is suspected
the confusion between those two is the failure cause. Revert the change
at this moment until the proper solution gets ready.
Link: https://lore.kernel.org/platform-driver-x86/CABq1_vjfyp_B-f4LAL6pg394bP6nDFyvg110TOLHHb0x4aCPeg@mail.gmail.com/T/#m07b30468d9676fc5e3bb2122371121e4559bb383 [1]
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240104114050.3142690-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7315dc1e122c85ffdfc8defffbb8f8b616c2eb1a upstream.
NFT_MSG_DELSET deactivates all elements in the set, skip
set->ops->commit() to avoid the unnecessary clone (for the pipapo case)
as well as the sync GC cycle, which could deactivate again expired
elements in such set.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use"
backported to 6.6.x) causes nl80211_set_cqm_rssi not to release the
wdev lock in some of the error paths.
Of course, the ensuing deadlock causes userland network managers to
break pretty badly, and on typical systems this also causes lockups on
on suspend, poweroff and reboot. See [1], [2], [3] for example reports.
The upstream commit 7e7efdda6adb ("wifi: cfg80211: fix CQM for non-range
use"), committed in November 2023, is completely fine because there was
another commit in August 2023 that removed the wdev lock:
see commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex").
The reason things broke in 6.6.5 is that commit 4338058f6009 was applied
without also applying 076fc8775daf.
Commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") is a rather
large commit; adjusting the error handling (which is what this commit does)
yields a much simpler patch and was tested to work properly.
Fix the deadlock by releasing the lock before returning.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218247
[2] https://bbs.archlinux.org/viewtopic.php?id=290976
[3] https://lore.kernel.org/all/87sf4belmm.fsf@turtle.gmx.de/
Link: https://lore.kernel.org/stable/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org/
Fixes: 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use")
Tested-by: "Léo Lam" <leo@leolam.fr>
Tested-by: Philip Müller <philm@manjaro.org>
Cc: stable@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: "Léo Lam" <leo@leolam.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.
[note: this is commit 4a7e92551618f3737b305f62451353ee05662f57 reapplied;
that commit had been reverted in 6.6.6 because it caused regressions, see
https://lore.kernel.org/stable/2023121450-habitual-transpose-68a1@gregkh/
for details]
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Cc: stable@vger.kernel.org
Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Léo Lam" <leo@leolam.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39a7dc23a1ed0fe81141792a09449d124c5953bd upstream.
If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.
That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.
This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.
But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.
Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.
Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: debdd57f5145f ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d05cb470663a2a1879277e544f69e660208f08f2 upstream.
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e74bb7d ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 623b1f896fa8a669a277ee5a258307a16c7377a3 upstream.
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
Unfortunately the test for being full was:
dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
return (dirty * 100) > (full * nr_pages);
Where "full" is the value for "buffer_percent".
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3e8b1858734bf46cda495be4165787b9a3981a6 upstream.
The commit was identified to might sleep in invalid context and is
blocking regression testing.
This reverts commit ee6fdc5055e916b1dd497f11260d4901c4c1e55e.
Link: https://lore.kernel.org/linux-nvme/hkhl56n665uvc6t5d6h3wtx7utkcorw4xlwi7d2t2bnonavhe6@xaan6pu43ap6/
Link: https://lists.infradead.org/pipermail/linux-nvme/2023-December/043756.html
Reported-by: Daniel Wagner <dwagner@suse.de>
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Cc: Michael Liang <mliang@purestorage.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79c5a0a00a9457718056b588f312baadf44e471 upstream.
A process may map only some of the pages in a folio, and might be missed
if it maps the poisoned page but not the head page. Or it might be
unnecessarily hit if it maps the head page, but not the poisoned page.
Link: https://lkml.kernel.org/r/20231218135837.3310403-3-willy@infradead.org
Fixes: 7af446a841a2 ("HWPOISON, hugetlb: enable error handling path for hugepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39ebd6dce62d8cfe3864e16148927a139f11bc9a upstream.
On 32-bit systems, we'll lose the top bits of index because arithmetic
will be performed in unsigned long instead of unsigned long long. This
affects files over 4GB in size.
Link: https://lkml.kernel.org/r/20231218135837.3310403-4-willy@infradead.org
Fixes: 6100e34b2526 ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc346d0a70a13d52fe1c4bc49516d83a42cd7c4c upstream.
Large folios occupy N consecutive entries in the swap cache instead of
using multi-index entries like the page cache. However, if a large folio
is re-added to the LRU list, it can be migrated. The migration code was
not aware of the difference between the swap cache and the page cache and
assumed that a single xas_store() would be sufficient.
This leaves potentially many stale pointers to the now-migrated folio in
the swap cache, which can lead to almost arbitrary data corruption in the
future. This can also manifest as infinite loops with the RCU read lock
held.
[willy@infradead.org: modifications to the changelog & tweaked the fix]
Fixes: 3417013e0d18 ("mm/migrate: Add folio_migrate_mapping()")
Link: https://lkml.kernel.org/r/20231214045841.961776-1-willy@infradead.org
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Closes: https://lkml.kernel.org/r/1700569840-17327-1-git-send-email-quic_charante@quicinc.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c27b803bb664748e090d99042ac128b3f88d92 upstream.
The following concurrency may cause the data read to be inconsistent with
the data on disk:
cpu1 cpu2
------------------------------|------------------------------
// Buffered write 2048 from 0
ext4_buffered_write_iter
generic_perform_write
copy_page_from_iter_atomic
ext4_da_write_end
ext4_da_do_write_end
block_write_end
__block_commit_write
folio_mark_uptodate
// Buffered read 4096 from 0 smp_wmb()
ext4_file_read_iter set_bit(PG_uptodate, folio_flags)
generic_file_read_iter i_size_write // 2048
filemap_read unlock_page(page)
filemap_get_pages
filemap_get_read_batch
folio_test_uptodate(folio)
ret = test_bit(PG_uptodate, folio_flags)
if (ret)
smp_rmb();
// Ensure that the data in page 0-2048 is up-to-date.
// New buffered write 2048 from 2048
ext4_buffered_write_iter
generic_perform_write
copy_page_from_iter_atomic
ext4_da_write_end
ext4_da_do_write_end
block_write_end
__block_commit_write
folio_mark_uptodate
smp_wmb()
set_bit(PG_uptodate, folio_flags)
i_size_write // 4096
unlock_page(page)
isize = i_size_read(inode) // 4096
// Read the latest isize 4096, but without smp_rmb(), there may be
// Load-Load disorder resulting in the data in the 2048-4096 range
// in the page is not up-to-date.
copy_page_to_iter
// copyout 4096
In the concurrency above, we read the updated i_size, but there is no read
barrier to ensure that the data in the page is the same as the i_size at
this point, so we may copy the unsynchronized page out. Hence adding the
missing read memory barrier to fix this.
This is a Load-Load reordering issue, which only occurs on some weak
mem-ordering architectures (e.g. ARM64, ALPHA), but not on strong
mem-ordering architectures (e.g. X86). And theoretically the problem
doesn't only happen on ext4, filesystems that call filemap_read() but
don't hold inode lock (e.g. btrfs, f2fs, ubifs ...) will have this
problem, while filesystems with inode lock (e.g. xfs, nfs) won't have
this problem.
Link: https://lkml.kernel.org/r/20231213062324.739009-1-libaokun1@huawei.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0aac13add26d546ac74c89d2883b3a5f0fbea039 upstream.
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4249f13c11be8b8b7bf93204185e150c3bdc968d upstream.
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b28ff7a7c3245d7f62acc20f15b4361292fe4117 upstream.
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d10c77873ba1e9e6b91905018e29e196fd5f863d upstream.
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70681aa0746ae61d7668b9f651221fad5e30c71e ]
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f9cc5c1f94daa98846b2073733d03ced709704b ]
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c13f365aee68b01e7e68ee293a71fdc7571c111 ]
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d374f3418df577c850f0cd45c3da9245ead547 ]
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fd19a30701659af5839b7bd19d1f05f05933ebe ]
The netlink PM can race with fastopen self-connect attempts, shutting
down the first subflow via:
MPTCP_PM_CMD_DEL_ADDR -> mptcp_nl_remove_id_zero_address ->
mptcp_pm_nl_rm_subflow_received -> mptcp_close_ssk
and transitioning such subflow to FIN_WAIT1 status before the syn-ack
packet is processed. The MPTCP code does not react to such state change,
leaving the connection in not-fallback status and the subflow handshake
uncompleted, triggering the following splat:
WARNING: CPU: 0 PID: 10630 at net/mptcp/subflow.c:1405 subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Modules linked in:
CPU: 0 PID: 10630 Comm: kworker/u4:11 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Workqueue: bat_events batadv_nc_worker
RIP: 0010:subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Code: 18 89 ee e8 e3 d2 21 f7 40 84 ed 75 1f e8 a9 d7 21 f7 44 89 fe bf 07 00 00 00 e8 0c d3 21 f7 41 83 ff 07 74 07 e8 91 d7 21 f7 <0f> 0b e8 8a d7 21 f7 48 89 df e8 d2 b2 ff ff 31 ff 89 c5 89 c6 e8
RSP: 0018:ffffc90000007448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031efc700 RCX: ffffffff8a65baf4
RDX: ffff888043222140 RSI: ffffffff8a65baff RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 000000000000000b R11: 0000000000000000 R12: 1ffff92000000e89
R13: ffff88807a534d80 R14: ffff888021c11a00 R15: 000000000000000b
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa19a0ffc81 CR3: 000000007a2db000 CR4: 00000000003506f0
DR0: 000000000000d8dd DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
tcp_data_ready+0x14c/0x5b0 net/ipv4/tcp_input.c:5128
tcp_data_queue+0x19c3/0x5190 net/ipv4/tcp_input.c:5208
tcp_rcv_state_process+0x11ef/0x4e10 net/ipv4/tcp_input.c:6844
tcp_v4_do_rcv+0x369/0xa10 net/ipv4/tcp_ipv4.c:1929
tcp_v4_rcv+0x3888/0x3b30 net/ipv4/tcp_ipv4.c:2329
ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x510 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_local_deliver+0x1b6/0x550 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish+0x1c4/0x2e0 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_rcv+0xce/0x440 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
process_backlog+0x101/0x6b0 net/core/dev.c:5969
__napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6531
napi_poll net/core/dev.c:6600 [inline]
net_rx_action+0x956/0xe90 net/core/dev.c:6733
__do_softirq+0x21a/0x968 kernel/softirq.c:553
do_softirq kernel/softirq.c:454 [inline]
do_softirq+0xaa/0xe0 kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x120 kernel/softirq.c:381
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_nc_purge_paths+0x1ce/0x3c0 net/batman-adv/network-coding.c:471
batadv_nc_worker+0x9b1/0x10e0 net/batman-adv/network-coding.c:722
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
</TASK>
To address the issue, catch the racing subflow state change and
use it to cause the MPTCP fallback. Such fallback is also used to
cause the first subflow state propagation to the msk socket via
mptcp_set_connected(). After this change, the first subflow can
additionally propagate the TCP_FIN_WAIT1 state, so rename the
helper accordingly.
Finally, if the state propagation is delayed to the msk release
callback, the first subflow can change to a different state in between.
Cache the relevant target state in a new msk-level field and use
such value to update the msk state at release time.
Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8005184fd1ca6aeb3fea36f4eb9463fc1b90c114 ]
The MPTCP protocol account for the data enqueued on all the subflows
to the main socket send buffer, while the send buffer auto-tuning
algorithm set the main socket send buffer size as the max size among
the subflows.
That causes bad performances when at least one subflow is sndbuf
limited, e.g. due to very high latency, as the MPTCP scheduler can't
even fill such buffer.
Change the send-buffer auto-tuning algorithm to compute the main socket
send buffer size as the sum of all the subflows buffer size.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-9-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4fd19a307016 ("mptcp: fix inconsistent state on fastopen race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 753547de0daecbdbd1af3618987ddade325d9aaa ]
The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.
Fixes: f3304ecd7f06 ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6847807c22f6944c71c981b630b9fff30801e73 ]
An alignment of 4 bytes is wrong for 64-bit platforms which don't define
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS (which then store 64-bit pointers).
Fix their alignment to 8 bytes.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e63bde3d9417f8318d6dd0d0fafa35ebf307aabd ]
All other users of crypto code use 'select' instead of 'depends on', so do
the same thing with KEXEC_FILE for consistency.
In practice this makes very little difference as kernels with kexec
support are very likely to also include some other feature that already
selects both crypto and crypto_sha256, but being consistent here helps for
usability as well as to avoid potential circular dependencies.
This reverts the dependency back to what it was originally before commit
74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for
new syscall"), which changed changed it with the comment "This should be
safer as "select" is not recursive", but that appears to have been done in
error, as "select" is indeed recursive, and there are no other
dependencies that prevent CRYPTO_SHA256 from being selected here.
Link: https://lkml.kernel.org/r/20231023110308.1202042-2-arnd@kernel.org
Fixes: 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ad12ee0efc07244be37f69311e6f7c4ac98e62 ]
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd357 ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fe654f78fd1ea4df046ef76b07ba92a35f8dbe ]
Commit 9b9c5bea0b96 ("cifs: do not return atime less than mtime") indicates
that in cifs, if atime is less than mtime, some apps will break.
Therefore, it introduce a function to compare this two variables in two
places where atime is updated. If atime is less than mtime, update it to
mtime.
However, the patch was handled incorrectly, resulting in atime and mtime
being exactly equal. A previous commit 69738cfdfa70 ("fs: cifs: Fix atime
update check vs mtime") fixed one place and forgot to fix another. Fix it.
Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime")
Cc: stable@vger.kernel.org
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 077c212f0344ae4198b2b51af128a94b614ccdf4 ]
Recently, we converted the ctime accesses in the kernel to use new
accessor functions. Linus recently pointed out though that if we add
accessors for the atime and mtime, then that would allow us to
seamlessly change how these timestamps are stored in the inode.
Add new accessor functions for the atime and mtime that mirror the
accessors for the ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185239.80830-1-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 01fe654f78fd ("fs: cifs: Fix atime update check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658609d9a618d8881bf549b5893c0ba8fcff4526 ]
opinfo_put() could be called twice on error of smb21_lease_break_ack().
It will cause UAF issue if opinfo is referenced on other places.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47d9886aeef79feba7adac701a510d65f3682b5 ]
If client send different parent key, different client guid, or there is
no parent lease key flags in create context v2 lease, ksmbd send lease
break to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb547407f3572d2110cb1194ecd8865b3371a7a4 ]
RWH(Read + Write + Handle) caching state is not supported for directory.
ksmbd downgrade it to RH for directory if client send RWH caching lease
state.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dd1c367c31d0a060f737d48345747662369b64 ]
Set SMB2_GLOBAL_CAP_DIRECTORY_LEASING to ->capabilities to inform server
support directory lease to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd80ce7e68f1624ac29cd0a6b057789d1236641e ]
ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error.
op_state of lease should not be updated because client can send lease
break ack again. This patch fix smb2.lease.breaking2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ac45ac7cf65b0623ceeab9b28b307a08efa22dc ]
Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of
interim response instead of current response header.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a3f7857ec742e212d6cee7fbbf7b0e2ae7f5161 ]
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e450920d58b4991a436c8cecf3484bcacd8e535 ]
ksmbd should process secound parallel smb2 create request during waiting
oplock break ack. parent lock range that is too large in smb2_open() causes
smb2_open() to be serialized. Move the oplock handling to the bottom of
smb2_open() and make it called after parent unlock. This fixes the failure
of smb2.lease.breaking1 testcase.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4274a9dc6aeb9fea66bffba15697a35ae8983b6a ]
xfstests generic/002 test fail when enabling smb2 leases feature.
This test create hard link file, but removeal failed.
ci has a file open count to count file open through the smb client,
but in the case of hard link files, The allocation of ci per inode
cause incorrectly open count for file deletion. This patch allocate
ci per dentry to counts open counts for hard link.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
