IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[Why] some test apps report dp link training waring even dp
training pass. there are 4 tries of lt within
perform_link_training_with_retries. if lt pass within 4 tries,
it will NOT be reated as lt failure. for each try of lt, if lt
fails, current driver implementation prints message at warning
level. this let people think dp lt does not work properly.
[How] for 1st, 2nd and 3rd try of lt, print message at debug
level. for the 4th try of lt, print message at warning level.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if check over DSC passthrough is removed, as this is not for
MST use case. It is for DP-HDMI pcon use case. sst pcon is
detected as sst not mst. In sst pcon dsc passthrough message
will not get below log printed
Fixes: 9b035d0890 ("drm/amd/display: Check & log if receiver supports MST, DSC & FEC.")
Suggested-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
32ms delay was added to resolve issue with a specific sink, however this same
delay also introduces erroneous link training failures with certain sink
devices.
[HOW]
Only apply the 32ms delay for offending devices instead of globally.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When link training during engine recovery, ASSR might fail causing panel
mode to be reset to default. This should not happen for eDP as it
will prevent the panel from turning back on.
[How]
Added dp_panel_mode to struct dc_link to remember previously applied
panel mode. Do not reset panel mode to default while performing link
training if previously used panel mode = eDP.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
Write DPCD 721 bit 7 to high, and
the appropriate luminance level
to DPCD 734-736 if bit 4 from DPCD register
734 is high, indicating that the panel
luminance control is enabled from the panel side.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Consolidate dmub access to a single interface. This makes it easier to
add code in the future that needs to run every time a dmub command is
requested (e.g. instrumentation, locking etc).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous 'commit ca9beb8aac ("drm/amd/display: Add logging when
setting DP sink power state fails")', it is better to unconditionally
print "failed to power up sink", because we are returning
DC_ERROR_UNEXPECTED.
Fixes: ca9beb8aac ("drm/amd/display: Add logging when setting DP sink power state fails")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the existing log with DP LT downspread info:
[Downstream devices shall support down spreading of the link clock.
The down-spread amplitude shall either be disabled (0.0%) or up to 0.5%,
as written by the upstream device to the DOWNSPREAD_CTRL register
(DPCD 00107h). The modulation frequency range shall be 30 to 33 kHz]
Besides, fix checkpatch warning:
CHECK: Alignment should match open parenthesis
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
New sequence for transparent mode DP1.x link training was provided by LTTPR
vendor
[HOW]
Implement new FIXED_VS sequence, increase LT retry count to minimize
any potential intermittent lightup failures
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The 6.75 GBps link rate is part of the new eDP specification
version 1.5 is going to be supported in the future.
Since this standard is very new and there are no existing 6.75 GBps
panels on the market yet, we should put a condition in the driver
on enabling this feature until we can validate it with real hardware.
[How]
- Add boolean flag support_eDP1_5 in struct dc_debug_options.
- Enable the 6.75 link rate in reduce_link_rate(...) only when
the flag is true.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <Artem.Grishin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The latest eDP spec version 1.5 defines a new generic link
rate of 6.75 Gbps/Lane, which needs to be supported in the driver.
[How]
Added new element to the dc_link_rate enum
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <Artem.Grishin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
‘ds_port’ is clearly not used anywhere and ‘result_write_min_hblank’ is
only utilised when debugging is enabled. The alternative would be to
allocate the variable under the same clause as the debugging code, but
that would become very messy, very quickly.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dp_wa_power_up_0010FA’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:280:42: warning: variable ‘ds_port’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dpcd_set_source_specific_data’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:1296:32: warning: variable ‘result_write_min_hblank’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h: At top level:
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:143:22:
warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:140:22:
warning: ‘DP_VGA_LVDS_CONVERTER_ID_3’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:138:22:
warning: ‘DP_VGA_LVDS_CONVERTER_ID_2’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:133:22:
warning: ‘DP_SINK_DEVICE_STR_ID_2’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:132:22:
warning: ‘DP_SINK_DEVICE_STR_ID_1’ defined but not used [-Wunused-const-variable=]
[snip 400 similar lines brevity]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
All dc subcomponents should call another dc component via function pointers
stored in a component structure. This is part of dc coding convention since
the beginning. The reason behind this is to improve encapsulation and
polymorphism. The function contract is extracted into a single link service
structure defined in link.h header file and implemented only in link_factory.c instead
of spreading across multiple files in link component file structure.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With gcc and W=1, there is this error
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:297:13: error:
variable ‘available’ set but not used [-Werror=unused-but-set-variable]
297 | int available = 0;
| ^~~~~~~~~
Since available is unused, remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component should only have one interface serving dc.
[how]
We are moving dc_link functions exposed to DM to dc_link_exports
and unify link component interface in link.h with function pointer
to match the style of other dc component. This is the third step to move
dc_link functions under protocols folder to dc_link_exports.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- We have added link_dp_dpia_bw code but it is not currently
added in makefile. We are adding this to makefile so it would
be built.
- Remove unused dc_link.h
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component should only have one interface serving dc.
[how]
We are moving dc_link functions exposed to DM to dc_link_exports
and unify link component interface in link.h with function pointer
to match the style of other dc component. This is the first step to move
dc_link functions under accessories folder to dc_link_exports.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Remove the need to include dc_link.h separately. dc.h should contain
everything needed on DM side.
[How]
Merge dc_link.h into dc.h and dc_types.h so DM only needs to include
dc.h to use all link public functions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
After we allocate BW at plug, we will de-alloc
and allocate only what stream needs at
stream_enable()
[HOW]
Introduce bw allocation check at link_enable()
for DPIA links
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
udelay should not be used for long waits since it keeps CPU active,
wasting power.
[HOW]
Use fsleep where acceptable to allow CPU cores to be parked by the scheduler.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We mistakenly toggle dpms state for non master pipe when handling
link lost. A non master pipe doesn't connect to a backend. So it is
toggling dpms for non master is undefined and caused NULL pointer
dereference.
[how]
Add helper functions to find an array of active master pipes for current
link and only toggle DPMS for active master pipes connected to the link.
Add assert in case we get called to program dpms with non master pipe.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
a recent regression has caused us to mistakenly switch RX back to SST mode
when there are remaining mst stream enabled to the link. We are missing
a condition check for stream count before setting RX back to SST mode.
[how]
Add stream count check condition back and do some further refactor so the
logic is easier to understand to prevent future coding error in this sequence.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.
[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DSC is enabled, the PSRSU seletive update region
must be multiple number of DSC slice height number.
The original solution is to overwrite the SU Y granularity
by DSC slice height in DAL driver. However, the size
of the SU Y granularity variable only has 8 bytes
and the DSC slice height may over the 8 bytes size.
[How]
Instead of overwriting the SU Y granularity value,
add a new DSC slice height pararmeter and pass it
to DMUB PSRSU FW. The PSRSU FW will refer to the
DSC slice height value and extend the SU region.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
