1252683 Commits

Author SHA1 Message Date
Huacai Chen
9fa304b9f8 LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.

Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.

Cc: stable@vger.kernel.org
Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23 14:36:31 +08:00
Huacai Chen
752cd08da3 LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling
clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:

jump label: negative count!
WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20
a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280
a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001
t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000
t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964
t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8
s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040
s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006
   ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
  ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
 PRMD: 00000004 (PPLV0 +PIE -PWE)
 EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
 ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000
        90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0
        900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001
        0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0
        0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f
        6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000
        900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000
        0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4
        0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c
        00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
        ...
Call Trace:
[<9000000000224528>] show_stack+0x48/0x1a0
[<900000000179afc8>] dump_stack_lvl+0x78/0xa0
[<9000000000263ed0>] __warn+0x90/0x1a0
[<90000000017419b8>] report_bug+0x1b8/0x280
[<900000000179c564>] do_bp+0x264/0x420
[<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100
[<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300
[<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0
[<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240
[<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0
[<900000000029a720>] kthread+0x140/0x160
[<9000000000222288>] ret_from_kernel_thread+0xc/0xa4

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23 14:36:31 +08:00
Huacai Chen
1001db6c42 LoongArch: Disable IRQ before init_fn() for nonboot CPUs
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to
silence such warnings (and also avoid potential errors due to unexpected
interrupts):

WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0
a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000
a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c
t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e
t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000
t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001
s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001
s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8
   ra: 90000000047bd56c tlb_init+0x24c/0x528
  ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280
 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
 PRMD: 00000000 (PPLV0 -PIE -PWE)
 EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
 ECFG: 00071000 (LIE=12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000
        900000010039fa30 0000000000000000 900000010039fa38 900000000619a140
        9000000006456888 9000000006456880 900000010039f950 0000000000000001
        0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700
        0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003
        0000000000040000 9000000007930370 0000000002b90000 0000000000000004
        9000000006366000 900000000619a140 0000000000000000 0000000000000004
        0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940
        9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8
        00000000000000b0 0000000000000000 0000000000000000 0000000000071000
        ...
Call Trace:
[<90000000047a4828>] show_stack+0x48/0x1a0
[<9000000005b61874>] dump_stack_lvl+0x84/0xcc
[<90000000047f60ac>] __warn+0x8c/0x1e0
[<9000000005b0ab34>] report_bug+0x1b4/0x280
[<9000000005b63110>] do_bp+0x2d0/0x480
[<90000000047a2e20>] handle_bp+0x120/0x1c0
[<90000000048e3334>] rcu_cpu_starting+0x214/0x280
[<90000000047bd568>] tlb_init+0x248/0x528
[<90000000047a4c44>] per_cpu_trap_init+0x124/0x160
[<90000000047a19f4>] cpu_probe+0x494/0xa00
[<90000000047b551c>] start_secondary+0x3c/0xc0
[<9000000005b66134>] smpboot_entry+0x50/0x58

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23 14:36:31 +08:00
Jeremy Kerr
3773d65ae5 net: mctp: take ownership of skb in mctp_local_output
Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.

Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.

Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:21:11 -08:00
Jakub Kicinski
e872469c38 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-20 (ice)

This series contains updates to ice driver only.

Yochai sets parent device to properly reflect connection state between
source DPLL and output pin.

Arkadiusz fixes additional issues related to DPLL; proper reporting of
phase_adjust value and preventing use/access of data while resetting.

Amritha resolves ASSERT_RTNL() being triggered on certain reset/rebuild
flows.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix ASSERT_RTNL() warning during certain scenarios
  ice: fix pin phase adjust updates on PF reset
  ice: fix dpll periodic work data updates on PF reset
  ice: fix dpll and dpll_pin data access on PF reset
  ice: fix dpll input pin phase_adjust value updates
  ice: fix connection state of DPLL and out pin
====================

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240220214444.1039759-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:19:37 -08:00
Florian Westphal
5ae1e9922b net: ip_tunnel: prevent perpetual headroom growth
syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
 kasan_report+0xda/0x110 mm/kasan/report.c:588
 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
 ___skb_get_hash net/core/flow_dissector.c:1791 [inline]
 __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
 skb_get_hash include/linux/skbuff.h:1556 [inline]
 ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
 ...
 ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
 ..
 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 ...

The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
  __skb_pull(skb, skb_network_offset(skb));

... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned.  IOW, we skb->data gets "adjusted" by a huge value.

The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.

The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.

The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel.  The ipip encapsulation finds gre0 as next output device.

This results in the following pattern:

1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.

2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).

3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).

4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.

tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.

This repeats for every future packet:

gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.

For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.

Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.

After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.

The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.

v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.

Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad830e8a ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:18:10 -08:00
Andre Werner
45532b21dc net: smsc95xx: add support for SYS TEC USB-SPEmodule1
This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L
ethernet device to the existing smsc95xx driver by adding the new
USB VID/PID pair.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:14:06 -08:00
Praveen Kumar Kannoju
a4634aa71f bonding: rate-limit bonding driver inspect messages
Through the routine bond_mii_monitor(), bonding driver inspects and commits
the slave state changes. During the times when slave state change and
failure in aqcuiring rtnl lock happen at the same time, the routine
bond_mii_monitor() reschedules itself to come around after 1 msec to commit
the new state.

During this, it executes the routine bond_miimon_inspect() to re-inspect
the state chane and prints the corresponding slave state on to the console.
Hence we do see a message at every 1 msec till the rtnl lock is acquired
and state chage is committed.

This patch doesn't change how bond functions. It only simply limits this
kind of log flood.

Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240221082752.4660-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:13:18 -08:00
Jakub Kicinski
4679f4f123 netfilter pr 2024-21-02
-----BEGIN PGP SIGNATURE-----
 
 iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmXV2OYNHGZ3QHN0cmxl
 bi5kZQAKCRBwkajZrV/2AHCRD/9sHoOd4QCVVgcDr3SjpaVWikM0Zdkge65At/uY
 bFENWgcDsSfsH7kAQm+nwzseT+QtTk9OOv9wqWzdEYROD7sqjVK2Zv/CUs24odGj
 7Wj35OLYLgUIEMlHF/G9kOuWqW61URXwXcHvoFWkew1WweAVDqi648osLWUP9qkL
 IFJ5729/1upq9XJc+pMxIy2Oe2zhMc4XNHsy1OCOg4fUQtDM81jgoJz0137ohCIh
 PW4aaSno8ZeRuFe1RKfya5+suv3WgMui/fOBmpnnhjWVxHRJvYZ926wsy/jC7xRJ
 E7/TdmymbzijRBEHh+IxQYZkE55XXc0E1Lj1ic653AzUWJ3tQRfD+HWg+GYj/WCu
 sWy1e7eRJIjYVbeB5m6ao3g47Zq1XIRXo7E2Rvt3E2beM6t9aMIMuuajBHAOEV2O
 pCfG4zBlEYw1SuuuoqzcXTVLKDf6WZjx1xtUAJCTks8JFTjPEwPwOQhGCv1cc/BC
 qox7MejeDH/L+ZreeTYnWlQr1GGokNgrmpdDx0G8GBBRUDPoP8D4GTxvNEz44XOO
 SfL2yl5v82GBBmsFHzC2J8BGN8KC4JyzDGupU+bcdMWCs8tSvMK0KVeankRvpdBl
 x4VLmdoNo6zvtOYlPOxdphhsd6xA0dFiLMgSr9f5WsIgepaC+Umxp59IfCEH/bfl
 1Kcg9g==
 =GYgG
 -----END PGP SIGNATURE-----

Merge tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next

Florian Westphal says:

====================
netfilter updates for net-next

1. Prefer KMEM_CACHE() macro to create kmem caches, from Kunwu Chan.

Patches 2 and 3 consolidate nf_log NULL checks and introduces
extra boundary checks on family and type to make it clear that no out
of bounds access will happen.  No in-tree user currently passes such
values, but thats not clear from looking at the function.
From Pablo Neira Ayuso.

Patch 4, also from Pablo, gets rid of unneeded conditional in
nft_osf init function.

Patch 5, from myself, fixes erroneous Kconfig dependencies that
came in an earlier net-next pull request. This should get rid
of the xtables related build failure reports.

Patches 6 to 10 are an update to nftables' concatenated-ranges
set type to speed up element insertions.  This series also
compacts a few data structures and cleans up a few oddities such
as reliance on ZERO_SIZE_PTR when asking to allocate a set with
no elements. From myself.

Patches 11 moves the nf_reinject function from the netfilter core
(vmlinux) into the nfnetlink_queue backend, the only location where
this is called from. Also from myself.

Patch 12, from Kees Cook, switches xtables' compat layer to use
unsafe_memcpy because xt_entry_target cannot easily get converted
to a real flexible array (its UAPI and used inside other structs).

* tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: x_tables: Use unsafe_memcpy() for 0-sized destination
  netfilter: move nf_reinject into nfnetlink_queue modules
  netfilter: nft_set_pipapo: use GFP_KERNEL for insertions
  netfilter: nft_set_pipapo: speed up bulk element insertions
  netfilter: nft_set_pipapo: shrink data structures
  netfilter: nft_set_pipapo: do not rely on ZERO_SIZE_PTR
  netfilter: nft_set_pipapo: constify lookup fn args where possible
  netfilter: xtables: fix up kconfig dependencies
  netfilter: nft_osf: simplify init path
  netfilter: nf_log: validate nf_logger_find_get()
  netfilter: nf_log: consolidate check for NULL logger in lookup function
  netfilter: expect: Simplify the allocation of slab caches in nf_conntrack_expect_init
====================

Link: https://lore.kernel.org/r/20240221112637.5396-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:06:20 -08:00
Florian Westphal
9a0d18853c netlink: add nla be16/32 types to minlen array
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
 nla_validate_range_unsigned lib/nlattr.c:222 [inline]
 nla_validate_int_range lib/nlattr.c:336 [inline]
 validate_nla lib/nlattr.c:575 [inline]
...

The message in question matches this policy:

 [NFTA_TARGET_REV]       = NLA_POLICY_MAX(NLA_BE32, 255),

but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.

Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.

Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 19:01:55 -08:00
Breno Leitao
3e7a0dccf0 ipv6/sit: Do not allocate stats in the driver
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the ipv6/sit driver and leverage the network
core allocation.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 18:57:53 -08:00
Geert Uytterhoeven
bcc115760f octeon_ep_vf: Improve help text grammar
Add missing articles.
Fix plural vs. singular.
Fix present vs. future.

Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sathesh B Edara <sedara@marvell.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b3b97462c3d9eba2ec03dd6d597e63bf49a7365a.1708512706.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 18:56:53 -08:00
Ryosuke Yasuoka
661779e1fc netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
syzbot reported the following uninit-value access issue [1]:

netlink_to_full_skb() creates a new `skb` and puts the `skb->data`
passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data
size is specified as `len` and passed to skb_put_data(). This `len`
is based on `skb->end` that is not data offset but buffer offset. The
`skb->end` contains data and tailroom. Since the tailroom is not
initialized when the new `skb` created, KMSAN detects uninitialized
memory area when copying the data.

This patch resolved this issue by correct the len from `skb->end` to
`skb->len`, which is the actual data offset.

BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532
 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420
 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 sock_read_iter+0x467/0x580 net/socket.c:1136
 call_read_iter include/linux/fs.h:2014 [inline]
 new_sync_read fs/read_write.c:389 [inline]
 vfs_read+0x8f6/0xe00 fs/read_write.c:470
 ksys_read+0x20f/0x4c0 fs/read_write.c:613
 __do_sys_read fs/read_write.c:623 [inline]
 __se_sys_read fs/read_write.c:621 [inline]
 __x64_sys_read+0x93/0xd0 fs/read_write.c:621
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was stored to memory at:
 skb_put_data include/linux/skbuff.h:2622 [inline]
 netlink_to_full_skb net/netlink/af_netlink.c:181 [inline]
 __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline]
 __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325
 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline]
 netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline]
 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
 netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 free_pages_prepare mm/page_alloc.c:1087 [inline]
 free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347
 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533
 release_pages+0x23d3/0x2410 mm/swap.c:1042
 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316
 tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
 tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
 tlb_flush_mmu+0x6f5/0x980 mm/mmu_gather.c:300
 tlb_finish_mmu+0x101/0x260 mm/mmu_gather.c:392
 exit_mmap+0x49e/0xd30 mm/mmap.c:3321
 __mmput+0x13f/0x530 kernel/fork.c:1349
 mmput+0x8a/0xa0 kernel/fork.c:1371
 exit_mm+0x1b8/0x360 kernel/exit.c:567
 do_exit+0xd57/0x4080 kernel/exit.c:858
 do_group_exit+0x2fd/0x390 kernel/exit.c:1021
 __do_sys_exit_group kernel/exit.c:1032 [inline]
 __se_sys_exit_group kernel/exit.c:1030 [inline]
 __x64_sys_exit_group+0x3c/0x50 kernel/exit.c:1030
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 3852-3903 of 3904 are uninitialized
Memory access of size 3904 starts at ffff88812ea1e000
Data copied to user address 0000000020003280

CPU: 1 PID: 5043 Comm: syz-executor297 Not tainted 6.7.0-rc5-syzkaller-00047-g5bd7ef53ffe5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023

Fixes: 1853c9496460 ("netlink, mmap: transform mmap skb into full skb on taps")
Reported-and-tested-by: syzbot+34ad5fab48f7bf510349@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34ad5fab48f7bf510349 [1]
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240221074053.1794118-1-ryasuoka@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 18:56:09 -08:00
Colin Ian King
cbe30f9943 net: microchip: lan743x: Fix spelling mistake "erro" -> "error"
There is a spelling mistake in a netif_err message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220091737.2676984-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 18:54:07 -08:00
Alexander Gordeev
9eda38dc91 net/af_iucv: fix virtual vs physical address confusion
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215080500.2616848-1-agordeev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 18:28:13 -08:00
Benjamin Tissoires
2ab256e932 bpf: add is_async_callback_calling_insn() helper
Currently we have a special case for BPF_FUNC_timer_set_callback,
let's introduce a helper we can extend for the kfunc that will come in
a later patch

Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-3-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 17:48:53 -08:00
Benjamin Tissoires
dfe6625df4 bpf: introduce in_sleepable() helper
No code change, but it'll allow to have only one place to change
everything when we add in_sleepable in cur_state.

Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-2-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 17:47:15 -08:00
Benjamin Tissoires
55bad79e33 bpf: allow more maps in sleepable bpf programs
These 2 maps types are required for HID-BPF when a user wants to do
IO with a device from a sleepable tracing point.

Allowing BPF_MAP_TYPE_QUEUE (and therefore BPF_MAP_TYPE_STACK) allows
for a BPF program to prepare from an IRQ the list of HID commands to send
back to the device and then these commands can be retrieved from the
sleepable trace point.

Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-1-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 17:42:23 -08:00
Dave Airlie
72fa02fdf8 nouveau: add an ioctl to report vram usage
This reports the currently used vram allocations.

userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.

Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-02-23 10:20:07 +10:00
Dave Airlie
3f4d8aac6e nouveau: add an ioctl to return vram bar size.
This returns the BAR resources size so userspace can make
decisions based on rebar support.

userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.

Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-02-23 10:20:03 +10:00
Dave Airlie
1d492944d3 nouveau/gsp: add kconfig option to enable GSP paths by default
Turing and Ampere will continue to use the old paths by default,
but we should allow distros to decide what the policy is.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214040632.661069-1-airlied@gmail.com
2024-02-23 10:00:41 +10:00
Dave Airlie
7c548869f5 UAPI Changes:
- Remove support for persistent exec_queues
 - Drop a reduntant sysfs newline printout
 
 Cross-subsystem Changes:
 
 Core Changes:
 
 Driver Changes:
 - A three-patch fix for a VM_BIND rebind optimization path
 - Fix a modpost warning on an xe KUNIT module
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZdcrZAAKCRC4FpNVCsYG
 v/VAAQC8tdUJRFzehwOlgu4tnozaxC5dsKhixf6gtt/z40uDyQD+Psf4f6ikE0PO
 y0e9HcacT8mbyNOmxK3UOV22OhC+Owc=
 =XXSU
 -----END PGP SIGNATURE-----

Merge tag 'drm-xe-fixes-2024-02-22' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes

UAPI Changes:
- Remove support for persistent exec_queues
- Drop a reduntant sysfs newline printout

Cross-subsystem Changes:

Core Changes:

Driver Changes:
- A three-patch fix for a VM_BIND rebind optimization path
- Fix a modpost warning on an xe KUNIT module

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcsNrxdWMMM417v@fedora
2024-02-23 09:45:23 +10:00
Jakub Kicinski
fecc51559a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/udp.c
  f796feabb9f5 ("udp: add local "peek offset enabled" flag")
  56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")

Adjacent changes:

net/unix/garbage.c
  aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
  11498715f266 ("af_unix: Remove io_uring code for GC.")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 15:29:26 -08:00
Jakub Kicinski
0fb848d1a4 wireless-next patches for v6.9
The third "new features" pull request for v6.9. This is a quick
 followup to send commit 04edb5dc68f4 ("wifi: ath12k: Fix uninitialized
 use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
 introduced in the previous pull request.
 
 We also have support for QCA2066 in ath11k, several new features in
 ath12k and few other changes in drivers. In stack it's mostly cleanup
 and refactoring.
 
 Major changes:
 
 ath12k
 
 * firmware-2.bin support
 
 * support having multiple identical PCI devices (firmware needs to
   have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
 
 * QCN9274: support split-PHY devices
 
 * WCN7850: enable Power Save Mode in station mode
 
 * WCN7850: P2P support
 
 ath11k:
 
 * QCA6390 & WCN6855: support 2 concurrent station interfaces
 
 * QCA2066 support
 
 iwlwifi
 
 * mvm: support wider-bandwidth OFDMA
 
 * bump firmware API to 90 for BZ/SC devices
 
 brcmfmac
 
 * DMI nvram filename quirk for ACEPC W5 Pro
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXJpARHGt2YWxvQGtl
 cm5lbC5vcmcACgkQbhckVSbrbZu2Twf/QZ5FVecvOu/qNQyUeaclXjNuFw0+cJpz
 luVzxG54wh484L1dRAmsztwHPA78rLMcExZi2Zb9PszVv4V9mD6rHoV0ws/o86Gr
 QTq+8To9sr9wJfooVRO1ifgfoiafxX2TYJ9yGR3XwkCDf5ROq9JLBOQWW8p0bO/M
 UyWoMvSf/WBAjOHUfCQzPCVPQhyld7JL/V7LGMZGmdy3cPkWPVXmRMyHL9f3+vdq
 O5/HxZBP4Dg3zEsUiOADmD/l+8wuf/Tebqt7uRJ4/sAHsmlEPzoZPsuNxy6FljYX
 5fuZVpzmjGzdGV+YHidpbZl/9Shq/Bc7Cf7eTQZ70P9cL1kbZ7usIA==
 =mcyY
 -----END PGP SIGNATURE-----

Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68f4 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.

We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.

Major changes:

ath12k
 * firmware-2.bin support
 * support having multiple identical PCI devices (firmware needs to
   have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
 * QCN9274: support split-PHY devices
 * WCN7850: enable Power Save Mode in station mode
 * WCN7850: P2P support

ath11k:
 * QCA6390 & WCN6855: support 2 concurrent station interfaces
 * QCA2066 support

iwlwifi
 * mvm: support wider-bandwidth OFDMA
 * bump firmware API to 90 for BZ/SC devices

brcmfmac
 * DMI nvram filename quirk for ACEPC W5 Pro

* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
  wifi: wilc1000: revert reset line logic flip
  wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
  wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
  wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
  wifi: rtlwifi: rtl8192cu: Fix TX aggregation
  wifi: wilc1000: remove AKM suite be32 conversion for external auth request
  wifi: nl80211: refactor parsing CSA offsets
  wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
  wifi: iwlwifi: load b0 version of ucode for HR1/HR2
  wifi: iwlwifi: handle per-phy statistics from fw
  wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
  wifi: iwlwifi: api: fix kernel-doc reference
  wifi: iwlwifi: mvm: unlock mvm if there is no primary link
  wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
  wifi: iwlwifi: mvm: support PHY context version 6
  wifi: iwlwifi: mvm: partially support PHY context version 6
  wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
  wifi: cfg80211: use ML element parsing helpers
  wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
  wifi: cfg80211: refactor RNR parsing
  ...
====================

Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22 15:11:19 -08:00
Dave Airlie
bfc7746a04 amd-drm-fixes-6.8-2024-02-22:
amdgpu:
 - Suspend/resume fixes
 - Backlight error fix
 - DCN 3.5 fixes
 - Misc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZdelVgAKCRC93/aFa7yZ
 2CEuAQCiF649fzJLaTcWiUW3RHEbt83RUiFgLf/QwZvyoZxWrQD/Q/g18Q9thC/R
 qFy0DAwQ9Tgatnzxzn9b8Xfd5EVoIAc=
 =0G5i
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-fixes-6.8-2024-02-22' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.8-2024-02-22:

amdgpu:
- Suspend/resume fixes
- Backlight error fix
- DCN 3.5 fixes
- Misc fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222195338.5809-1-alexander.deucher@amd.com
2024-02-23 08:37:07 +10:00
Dave Airlie
741922e7fb Merge tag 'drm-intel-fixes-2024-02-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixup for TV mode

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcwT9kltvEgJZZE@jlahtine-mobl.ger.corp.intel.com
2024-02-23 08:30:21 +10:00
Dave Airlie
f581dbb34c A list handling fix and 64bit division on 32bit platform fix for the
drm/buddy allocator, a cast warning and an initialization fix for
 nouveau, a bridge handling fix for meson, an initialisation fix for
 ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two
 fence handling fixes for syncobj.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZdeI8QAKCRDj7w1vZxhR
 xTMdAP9YVgpb8RlifVyi0H5jRtlsIKNpKECQpz1o6KsNIqp3WAEA1rMU8Rbbn7oj
 goeoviKt1anQ+vlonWRYeo1Z3SctKwU=
 =gJLo
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

A list handling fix and 64bit division on 32bit platform fix for the
drm/buddy allocator, a cast warning and an initialization fix for
nouveau, a bridge handling fix for meson, an initialisation fix for
ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two
fence handling fixes for syncobj.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/gl2antuifidtzn3dfm426p7xwh5fxj23behagwh26owfnosh2w@gqoa7vj5prnh
2024-02-23 08:09:50 +10:00
Martin KaFai Lau
63c7049ef9 Merge branch 'Check cfi_stubs before registering a struct_ops type.'
Kui-Feng Lee says:

====================
Recently, st_ops->cfi_stubs was introduced. However, the upcoming new
struct_ops support (e.g. sched_ext) is not aware of this and does not
provide its own cfi_stubs. The kernel ends up NULL dereferencing the
st_ops->cfi_stubs.

Considering struct_ops supports kernel module now, this NULL check
is necessary. This patch set is to reject struct_ops registration
that does not provide a cfi_stubs.

Changes from v4:

 - Remove changes of check_member.

 - Remove checks of the pointers in cfi_stubs[].

Changes from v3:

 - Remove CFI stub function for get_info.

 - Allow passing NULL prog arg to check_member of struct
   bpf_struct_ops type.

 - Call check_member to determines if a CFI stub function should be
   defined for an operator.

Changes from v2:

 - Add a stub function for get_info of struct tcp_congestion_ops.

Changes from v1:

 - Check *(void **)(cfi_stubs + moff) to make sure stub functions are
   provided for every operator.

 - Add a test case to ensure that struct_ops rejects incomplete
   cfi_stub.

v4: https://lore.kernel.org/all/20240221075213.2071454-1-thinker.li@gmail.com/
v3: https://lore.kernel.org/all/20240216193434.735874-1-thinker.li@gmail.com/
v2: https://lore.kernel.org/all/20240216020350.2061373-1-thinker.li@gmail.com/
v1: https://lore.kernel.org/all/20240215022401.1882010-1-thinker.li@gmail.com/
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-22 12:26:42 -08:00
Kui-Feng Lee
e9bbda13a7 selftests/bpf: Test case for lacking CFI stub functions.
Ensure struct_ops rejects the registration of struct_ops types without
proper CFI stub functions.

bpf_test_no_cfi.ko is a module that attempts to register a struct_ops type
called "bpf_test_no_cfi_ops" with cfi_stubs of NULL and non-NULL value.
The NULL one should fail, and the non-NULL one should succeed. The module
can only be loaded successfully if these registrations yield the expected
results.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-22 12:26:41 -08:00
Kui-Feng Lee
3e0008336a bpf: Check cfi_stubs before registering a struct_ops type.
Recently, st_ops->cfi_stubs was introduced. However, the upcoming new
struct_ops support (e.g. sched_ext) is not aware of this and does not
provide its own cfi_stubs. The kernel ends up NULL dereferencing the
st_ops->cfi_stubs.

Considering struct_ops supports kernel module now, this NULL check
is necessary. This patch is to reject struct_ops registration
that does not provide a cfi_stubs.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-22 12:26:40 -08:00
Linus Torvalds
ffd2cb6b71 block-6.8-2024-02-22
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmXXiBEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprR0D/9zwzw1JcCcaMlYPL8yJcUjxNOQF7qrldXQ
 86u4Jmqq8QtAzOZWTuXZiFBaq9/+h7FsnPppPXsTXPxz6wrlOHhc+38NR0Zs3kHq
 vng6glfRRBkX8NuMGID754IOpwS79ZP3z07Yk6ruZKcmVVx40WVBLtFwENA7Ub+Q
 /ktbu0PUe+7xBIsEBkgDGBfpyagJaMP+vgaQzl36sDXVY5lSiyHRhez27WrovNGU
 kXOTzuEY2RezWF6oI7yth7zllTAw/tJEpbjhFZCOm6DaZffHF7AHpoTOLYdK989Y
 ZA2d9tWltfgTvjohNUjtQmlL/SHKHFKE+JrlUgkv8KpGN9Y+ySKJsoSG37ntL3+W
 fX5NAe5MDy5xO6jm/Kj8668oYdlCHODm3faj3ezzhBTQYFEssc9bX06uGhiQugaI
 fosI4oAHJ9jYFNzZzeAMx1oFvorCzinseGbDzN/938Q6nRAZdpLxWHhQ6V1+81Ny
 lv/HFV4DoDW+4sMp69UP8yK92x9UDutaxwbl7tgdnHfPmp9s8VeLgv6xbPRB5hJp
 XrCH1WVgM7cYGz26pVhUrFDIdPBVPPNfTz0hAo2O1zpGbM+2JiENgK71MrLu5P9i
 m+QRa8FIeV80wRH0wdT4H/Oy8r8fOrUD8JG6WKiR98SSS81raOWdF8TzFWGEuFvO
 ZH5FBgowjg==
 =0LBw
 -----END PGP SIGNATURE-----

Merge tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:
 "Mostly just fixlets for md, but also a sed-opal parsing fix"

* tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux:
  block: sed-opal: handle empty atoms when parsing response
  md: Don't suspend the array for interrupted reshape
  md: Don't register sync_thread for reshape directly
  md: Make sure md_do_sync() will set MD_RECOVERY_DONE
  md: Don't ignore read-only array in md_check_recovery()
  md: Don't ignore suspended array in md_check_recovery()
  md: Fix missing release of 'active_io' for flush
2024-02-22 11:57:30 -08:00
Linus Torvalds
4c36fbb46f iommufd for 6.8 rc
- Fix dirty tracking bitmap collection when using reporting bitmaps that
   are not neatly aligned to u64's or match the IO page table radix tree
   layout.
 
 - Add self tests to cover the cases that were found to be broken.
 
 - Add missing enforcement of invalidation type in the uapi.
 
 - Fix selftest config generation
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZddJHAAKCRCFwuHvBreF
 YaRyAQCuywXMOQsPcTXZk+bepQ0EacRZKfyPrIcKMaHC1QLwKgEA9ApiVSbai0Q+
 5IFX+rWrLUB4jiH5D12kmfhxgydFDAk=
 =CCxs
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd

Pull iommufd fixes from Jason Gunthorpe:

 - Fix dirty tracking bitmap collection when using reporting bitmaps
   that are not neatly aligned to u64's or match the IO page table radix
   tree layout.

 - Add self tests to cover the cases that were found to be broken.

 - Add missing enforcement of invalidation type in the uapi.

 - Fix selftest config generation

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  selftests/iommu: fix the config fragment
  iommufd: Reject non-zero data_type if no data_len is provided
  iommufd/iova_bitmap: Consider page offset for the pages to be pinned
  iommufd/selftest: Add mock IO hugepages tests
  iommufd/selftest: Hugepage mock domain support
  iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
  iommufd/selftest: Refactor dirty bitmap tests
  iommufd/iova_bitmap: Handle recording beyond the mapped pages
  iommufd/selftest: Test u64 unaligned bitmaps
  iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
  iommufd/iova_bitmap: Bounds check mapped::pages access
2024-02-22 11:53:09 -08:00
Linus Torvalds
c7138f7a35 platform-drivers-x86 for v6.8-3
Highlights:
  -  Regression fixes:
     -  Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI changes
     -  AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend
     -  x86-android-tablets: Fix touchscreen no longer working on Lenovo Yogabook
     -  x86-android-tablets: Fix serdev instantiation regression
     -  intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending
  -  Bug fixes
     -  think-lmi: Fix changing BIOS settings on Lenovo workstations
     -  touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing
     -  AMD-PMF: Fix Smart PC support not working after suspend/resume
  -  Other misc. small fixes
 
 The following is an automated git shortlog grouped by driver:
 
 Add new get_serdev_controller() helper:
  -  Add new get_serdev_controller() helper
 
 intel:
  -  int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
 
 intel-vbtn:
  -  Stop calling "VBDL" from notify_handler
 
 platform/x86/amd/pmf:
  -  Fix a potential race with policy binary sideload
  -  Fixup error handling for amd_pmf_init_smart_pc()
  -  Add debugging message for missing policy data
  -  Fix a suspend hang on Framework 13
  -  Fix TEE enact command failure after suspend and resume
  -  Remove smart_pc_status enum
 
 think-lmi:
  -  Fix password opcode ordering for workstations
 
 thinkpad_acpi:
  -  Only update profile if successfully converted
 
 touchscreen_dmi:
  -  Consolidate Goodix upside-down touchscreen data
  -  Allow partial (prefix) matches for ACPI names
 
 x86-android-tablets:
  -  Fix acer_b1_750_goodix_gpios name
  -  Fix serdev instantiation no longer working
  -  Fix keyboard touchscreen on Lenovo Yogabook1 X90
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmXXRLAUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xYcwf+NBaayytcefvTUZ2tgCMj1ZTaQAxV
 TB/W9j25i/kW6OLvqn8jIVJW7fNh0+onoVYDjWCxwGKp078OeL/xYd5W6uvPOmij
 eP6cphlp7ysBZSd8g+Yz4KSl9EfiJsQ5njzozHcK15zNVy4WKcNCcxY+SDsK2szk
 cNharuxOiOjU8U+a9sQsh4kj9AIEjLy42adxQ6LD1H7njNh3veZ3j2XejRFQCJL0
 q6E0IxIFX6GpUQpD0Z2uuR/Tat/he7taPe+kv9G0y1x2fRvgqk5fGKie6QCTV9qe
 tFqpVVs7Kp1MrsQw9fGtLPwkFjeQFD59VI8YveacNLc3hD0RgCHVV7Rx7g==
 =ophs
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Regression fixes:

   - Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
     changes

   - AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend

   - x86-android-tablets: Fix touchscreen no longer working on Lenovo
     Yogabook

   - x86-android-tablets: Fix serdev instantiation regression

   - intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending

  Bug fixes:

   - think-lmi: Fix changing BIOS settings on Lenovo workstations

   - touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing

   - AMD-PMF: Fix Smart PC support not working after suspend/resume

  Other misc small fixes"

* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Only update profile if successfully converted
  platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
  platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
  platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
  platform/x86: Add new get_serdev_controller() helper
  platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
  platform/x86/amd/pmf: Fix a potential race with policy binary sideload
  platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
  platform/x86/amd/pmf: Add debugging message for missing policy data
  platform/x86/amd/pmf: Fix a suspend hang on Framework 13
  platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
  platform/x86/amd/pmf: Remove smart_pc_status enum
  platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
  platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
  platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
  platform/x86: think-lmi: Fix password opcode ordering for workstations
2024-02-22 11:47:07 -08:00
Linus Torvalds
88953761b9 Here's some Samsung clk driver fixes I've been sitting on for far too
long. They fix the bindings and clk driver for the Google GS101 SoC.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmXWxy8RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW5vQ/+PGlTvQ8B2M2ftUMCV7n7/SWXxyc+uYDc
 j3CW2JFfwgfT7T5c5FO4xfRmxelGXMeng9JiffpnnZOy3PRsnvx+vrB/0Z3gfU78
 iBSvLRfikO9Oju/TsbJ4dGBEEzB0f3596OcihFxKNJRccX+3LH7J/NLStaZ+it3R
 kfuxYapIOY4QnDwsb8BM5uW8rNB5LuHlY5j2gDdrD+DdAwAXrDglQ5lfQLiHsy+n
 GQRKJ7zw8hXymDiUTlFsz41NSpd1i9FhQEFAqIGiDrbCul+JgYVFB7yc81ik8ovR
 S/rafvgz+mxryFdW8UC1KmGRqAJFa8tQPsBrAZ9i0/irmVaNCFsWeUD0sndfGkhh
 435BdTJ/1S9kH/iU+Vv5BOrPzkVFd59Ht64wQNl8Jz29lkNQyRIWtvcqKhlbPN29
 uWiAKqCtYHfpsxqD+kybXOMSEEOVF7wObFN01XZzz3yFt8FSTUMPOg4OhWns22kV
 8r+fNOdpLB5vp92NVerwOjh585EP9+6vK2/lWAr3D6iBbkZqwcy/WjNhQYXEfEyg
 FAGt1H8FtRnUm40JsuWn3J6rj0rGXfbfm++h5n0B+sxRq3QEzn4r+nwk5qxtRwFo
 CDjzD8MApEpSBpXhSVoj3oSyJYFpgrTcyA2/Q7vCyvMNtUXF5OdzzGbw8wnUeoTO
 qhRPshBOqOw=
 =X4vR
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Here are some Samsung clk driver fixes I've been sitting on for far
  too long.

  They fix the bindings and clk driver for the Google GS101 SoC"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
  dt-bindings: clock: gs101: rename cmu_misc clock-names
2024-02-22 11:44:20 -08:00
Martin Kelly
58fd62e0aa bpf: Clarify batch lookup/lookup_and_delete semantics
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.

Document these semantics to clarify the API.

Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-22 10:24:38 -08:00
Linus Torvalds
1c892cdd8f vfs-6.8-rc6.fixes
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZddOmwAKCRCRxhvAZXjc
 oq1lAQDus0SGgwuwArdHtbbVj+gTs4s5XKvuGI6mqRiLvgvTzwD/TTNnOqJjWacS
 on7XxDHgnjbMR2r90W/MuyPPjtAPkgA=
 =i2E/
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs fixes from Christian Brauner:

 - Fix a memory leak in cachefiles

 - Restrict aio cancellations to I/O submitted through the aio
   interfaces as this is otherwise causing issues for I/O submitted
   via io_uring

 - Increase buffer for afs volume status to avoid overflow

 - Fix a missing zero-length check in unbuffered writes in the
   netfs library. If generic_write_checks() returns zero make
   netfs_unbuffered_write_iter() return right away

 - Prevent a leak in i_dio_count caused by netfs_begin_read() operating
   past i_size. It will return early and leave i_dio_count incremented

 - Account for ipv4 addresses as well as ipv6 addresses when processing
   incoming callbacks in afs

* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
  afs: Increase buffer size in afs_update_volume_status()
  afs: Fix ignored callbacks over ipv4
  cachefiles: fix memory leak in cachefiles_add_cache()
  netfs: Fix missing zero-length check in unbuffered write
  netfs: Fix i_dio_count leak on DIO read past i_size
2024-02-22 10:06:29 -08:00
Linus Torvalds
6714ebb922 Including fixes from bpf and netfilter.
Current release - regressions:
 
   - af_unix: fix another unix GC hangup
 
 Previous releases - regressions:
 
   - core: fix a possible AF_UNIX deadlock
 
   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
 
   - netfilter: nft_flow_offload: release dst in case direct xmit path is used
 
   - bridge: switchdev: ensure MDB events are delivered exactly once
 
   - l2tp: pass correct message length to ip6_append_data
 
   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
 
   - tls: fixes for record type handling with PEEK
 
   - devlink: fix possible use-after-free and memory leaks in devlink_init()
 
 Previous releases - always broken:
 
   - bpf: fix an oops when attempting to read the vsyscall
   	 page through bpf_probe_read_kernel
 
   - sched: act_mirred: use the backlog for mirred ingress
 
   - netfilter: nft_flow_offload: fix dst refcount underflow
 
   - ipv6: sr: fix possible use-after-free and null-ptr-deref
 
   - mptcp: fix several data races
 
   - phonet: take correct lock to peek at the RX queue
 
 Misc:
 
   - handful of fixes and reliability improvements for selftests
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmXXKMMSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkmgAQAIV2NAVEvHVBtnm0Df9PuCcHQx6i9veS
 tGxOZMVwb5ePFI+dpiNyyn61koEiRuFLOm66pfJAuT5j5z6m4PEFfPZgtiVpCHVK
 4sz4UD4+jVLmYijv+YlWkPU3RWR0RejSkDbXwY5Y9Io/DWHhA2iq5IyMy2MncUPY
 dUc12ddEsYRH60Kmm2/96FcdbHw9Y64mDC8tIeIlCAQfng4U98EXJbCq9WXsPPlW
 vjwSKwRG76QGDugss9XkatQ7Bsva1qTobFGDOvBMQpMt+dr81pTGVi0c1h/drzvI
 EJaDO8jJU3Xy0pQ80beboCJ1KlVCYhWSmwlBMZUA1f0lA2m3U5UFEtHA5hHKs3Mi
 jNe/sgKXzThrro0fishAXbzrro2QDhCG3Vm4PRlOGexIyy+n0gIp1lHwEY1p2vX9
 RJPdt1e3xt/5NYRv6l2GVQYFi8Wd0endgzCdJeXk0OWQFLFtnxhG6ejpgxtgN0fp
 CzKU6orFpsddQtcEOdIzKMUA3CXYWAdQPXOE5Ptjoz3MXZsQqtMm3vN4and8jJ19
 8/VLsCNPp11bSRTmNY3Xt85e+gjIA2mRwgRo+ieL6b1x2AqNeVizlr6IZWYQ4TdG
 rUdlEX0IVmov80TSeQoWgtzTO7xMER+qN6FxAs3pQoUFjtol3pEURq9FQ2QZ8jW4
 5rKpNBrjKxdk
 =eUOc
 -----END PGP SIGNATURE-----

Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - af_unix: fix another unix GC hangup

  Previous releases - regressions:

   - core: fix a possible AF_UNIX deadlock

   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()

   - netfilter: nft_flow_offload: release dst in case direct xmit path
     is used

   - bridge: switchdev: ensure MDB events are delivered exactly once

   - l2tp: pass correct message length to ip6_append_data

   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after
     check_estalblished()

   - tls: fixes for record type handling with PEEK

   - devlink: fix possible use-after-free and memory leaks in
     devlink_init()

  Previous releases - always broken:

   - bpf: fix an oops when attempting to read the vsyscall page through
     bpf_probe_read_kernel

   - sched: act_mirred: use the backlog for mirred ingress

   - netfilter: nft_flow_offload: fix dst refcount underflow

   - ipv6: sr: fix possible use-after-free and null-ptr-deref

   - mptcp: fix several data races

   - phonet: take correct lock to peek at the RX queue

  Misc:

   - handful of fixes and reliability improvements for selftests"

* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  l2tp: pass correct message length to ip6_append_data
  net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
  selftests: ioam: refactoring to align with the fix
  Fix write to cloned skb in ipv6_hop_ioam()
  phonet/pep: fix racy skb_queue_empty() use
  phonet: take correct lock to peek at the RX queue
  net: sparx5: Add spinlock for frame transmission from CPU
  net/sched: flower: Add lock protection when remove filter handle
  devlink: fix port dump cmd type
  net: stmmac: Fix EST offset for dwmac 5.10
  tools: ynl: don't leak mcast_groups on init error
  tools: ynl: make sure we always pass yarg to mnl_cb_run
  net: mctp: put sock on tag allocation failure
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
  selftests: tls: add test for peeking past a record of a different type
  selftests: tls: add test for merging of same-type control messages
  ...
2024-02-22 09:57:58 -08:00
Ma Jun
bbfaf2aea7 drm/amdgpu: Fix the runtime resume failure issue
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.

Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2024-02-22 12:28:27 -05:00
Melissa Wen
9671761792 drm/amd/display: fix null-pointer dereference on edid reading
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:

[  +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[  +0.000010] #PF: supervisor read access in kernel mode
[  +0.000005] #PF: error_code(0x0000) - not-present page
[  +0.000004] PGD 0 P4D 0
[  +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[  +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[  +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[  +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[  +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[  +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[  +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[  +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[  +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[  +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[  +0.000004] FS:  00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[  +0.000003] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000006]  <TASK>
[  +0.000006]  ? __die+0x23/0x70
[  +0.000011]  ? page_fault_oops+0x17d/0x4c0
[  +0.000008]  ? preempt_count_add+0x6e/0xa0
[  +0.000008]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000011]  ? exc_page_fault+0x7f/0x180
[  +0.000009]  ? asm_exc_page_fault+0x26/0x30
[  +0.000013]  ? i2c_transfer+0xd/0x100
[  +0.000010]  drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[  +0.000067]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000006]  ? _drm_do_get_edid+0x97/0x3c0 [drm]
[  +0.000043]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000042]  edid_block_read+0x3b/0xd0 [drm]
[  +0.000043]  _drm_do_get_edid+0xb6/0x3c0 [drm]
[  +0.000041]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000043]  drm_edid_read_custom+0x37/0xd0 [drm]
[  +0.000044]  amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[  +0.000153]  drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[  +0.000000]  __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[  +0.000000]  ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[  +0.000000]  status_store+0xb2/0x1f0 [drm]
[  +0.000000]  kernfs_fop_write_iter+0x136/0x1d0
[  +0.000000]  vfs_write+0x24d/0x440
[  +0.000000]  ksys_write+0x6f/0xf0
[  +0.000000]  do_syscall_64+0x60/0xc0
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? syscall_exit_to_user_mode+0x2b/0x40
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  +0.000000] RIP: 0033:0x7f9ad46b4b00
[  +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[  +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[  +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[  +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[  +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[  +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[  +0.000000]  </TASK>
[  +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[  +0.000000]  snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[  +0.000000]  usb_common crct10dif_common video wmi
[  +0.000000] CR2: 00000000000004c0
[  +0.000000] ---[ end trace 0000000000000000 ]---

Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:27:30 -05:00
Armin Wolf
bae6789357 drm/amd/display: Fix memory leak in dm_sw_fini()
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:

unreferenced object 0xffff896302b45800 (size 1024):
  comm "(udev-worker)", pid 222, jiffies 4294894636
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 6265fd77):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
    [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
    [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
    [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
    [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
    [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
    [<ffffffff996918a3>] pci_device_probe+0xc3/0x230
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300

Fix this by freeing dmub_srv after destroying it.

Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:26:59 -05:00
Swapnil Patel
27a6c49394 drm/amd/display: fix input states translation error for dcn35 & dcn351
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.

[How]
For dcn35 and dcn351, make output_states equal to input states.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:24:57 -05:00
Srinivasan Shanmugam
d2b48f340d drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.

In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.

Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.

Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)

Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:23:40 -05:00
Linus Torvalds
efa80dcbb7 Tracing fix for v6.8:
- While working on the ring buffer I noticed that the counter used
   for knowing where the end of the data is on a sub-buffer was not
   a full "int" but just 20 bits. It was masked out to 0xfffff.
   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size
   bigger than 2^20. If that happens, unexpected results may
   occur as there's no code checking if the counter overflowed the
   20 bits of the write mask. There are other checks to make sure
   events fit in the sub-buffer, but if the sub-buffer itself is
   too big, that is not checked.
 
   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much
   data is on it.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZdaf+RQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qjEIAQDpsvHqUFNoG5fkRlWr2U0hNl5M6zLI
 xTf2mWoG/h8bwQD+NfiRC2UrD5EaubO15z0z6MxScOl1H9X+iI7WVwZkqQ8=
 =txOr
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fix from Steven Rostedt:

 - While working on the ring buffer I noticed that the counter used for
   knowing where the end of the data is on a sub-buffer was not a full
   "int" but just 20 bits. It was masked out to 0xfffff.

   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size bigger
   than 2^20. If that happens, unexpected results may occur as there's
   no code checking if the counter overflowed the 20 bits of the write
   mask. There are other checks to make sure events fit in the
   sub-buffer, but if the sub-buffer itself is too big, that is not
   checked.

   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much data is
   on it.

* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not let subbuf be bigger than write mask
2024-02-22 09:23:22 -08:00
Lewis Huang
4e73826089 drm/amd/display: Only allow dig mapping to pwrseq in new asic
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.

[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component

Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:23:01 -05:00
Wayne Lin
22e1dc4b2f drm/amd/display: adjust few initialization order in dm
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:

1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.

2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence

[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.

Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()

Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22 12:22:36 -05:00
Dave Thaler
89ee838130 bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
Specifying which fields were unused allows IANA to only list as deprecated
instructions that were actually used, leaving the rest as unassigned and
possibly available for future use for something else.

Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240221175419.16843-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 09:11:49 -08:00
Dave Thaler
c1bb68f6b2 bpf, docs: Fix typos in instruction-set.rst
* "BPF ADD" should be "BPF_ADD".
* "src" should be "src_reg" in several places.  The latter is the field name
  in the instruction.  The former refers to the value of the register, or the
  immediate.
* Add '' around field names in one sentence, for consistency with the rest
  of the document.

Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240221173535.16601-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 09:07:37 -08:00
Alexei Starovoitov
8425b6eb51 Merge branch 'selftests-bpf-reduce-tcp_custom_syncookie-verification-complexity'
Eduard Zingerman says:

====================
selftests/bpf: reduce tcp_custom_syncookie verification complexity

Thread [0] discusses a fix for bpf_loop() handling bug.
That change makes tcp_custom_syncookie test too complex to verify.
The fix discussed in [0] would be sent via 'bpf' tree,
tcp_custom_syncookie test is not in 'bpf' tree yet.
As agreed in [0] I'm sending syncookie test update separately.

[0] https://lore.kernel.org/bpf/20240216150334.31937-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240222150300.14909-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 08:46:15 -08:00
Eduard Zingerman
b546b57526 selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
This commit updates tcp_custom_syncookie.c:tcp_parse_option() to use
explicit packet offset (ctx->off) for packet access instead of ever
moving pointer (ctx->ptr), this reduces verification complexity:
- the tcp_parse_option() is passed as a callback to bpf_loop();
- suppose a checkpoint is created each time at function entry;
- the ctx->ptr is tracked by verifier as PTR_TO_PACKET;
- the ctx->ptr is incremented in tcp_parse_option(),
  thus umax_value field tracked for it is incremented as well;
- on each next iteration of tcp_parse_option()
  checkpoint from a previous iteration can't be reused
  for state pruning, because PTR_TO_PACKET registers are
  considered equivalent only if old->umax_value >= cur->umax_value;
- on the other hand, the ctx->off is a SCALAR,
  subject to widen_imprecise_scalars();
- it's exact bounds are eventually forgotten and it is tracked as
  unknown scalar at entry to tcp_parse_option();
- hence checkpoints created at the start of the function eventually
  converge.

The change is similar to one applied in [0] to xdp_synproxy_kern.c.

Comparing before and after with veristat yields following results:

File                             Insns (A)  Insns (B)  Insns      (DIFF)
-------------------------------  ---------  ---------  -----------------
test_tcp_custom_syncookie.bpf.o     466657      12423  -454234 (-97.34%)

[0] commit 977bc146d4eb ("selftests/bpf: track tcp payload offset as scalar in xdp_synproxy")

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222150300.14909-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-22 08:46:15 -08:00
Peter Oberparleiter
5ef1dc40ff s390/cio: fix invalid -EBUSY on ccw_device_start
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.

Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.

The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):

1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
   echo on > /sys/devices/css0/chp0.02/status

Background information:

The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.

If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).

If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.

In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.

Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:

2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")

During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.

[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service

Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-22 15:53:15 +01:00