9a45081bb1
2725 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Peng Fan
|
9a45081bb1 |
dt-bindings: clock: add i.MX93 clock definition
Add i.MX93 clock definition Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220228020908.2810346-3-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> |
||
Giulio Benetti
|
a81595729b |
dt-bindings: imx: Add clock binding for i.MXRT1050
Add the clock binding doc for i.MXRT1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> [Jesse: added clocks from IMXRT1050_CLK_IPG_PDOF to IMXRT1050_CLK_DMA_MUX and moved IMXRT1050_CLK_END on] Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220111215415.2075257-4-Mr.Bossman075@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> |
||
Linus Torvalds
|
3bad80dab9 |
Char/Misc and other driver changes for 5.17-rc1
Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z hMr9mISG4r6g4PvjrJBj =9May -----END PGP SIGNATURE----- Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ... |
||
|
Linus Torvalds
|
3ceff4ea07 |
sound updates for 5.17-rc1
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
|
||
|
Linus Torvalds
|
fb3b0673b7 |
- qcom: misc updates to qcom-ipcc driver
- mpfs: change compatible string
- pcc: fix handling of subtypes
avoid uninit variable
- mtk: add missing of_node_put
enable control_by_sw
silent probe-defer prints
fix gce_num for mt8192
- zynq: add missing of_node_put
- imx: check for NULL instead of IS_ERR
- appple: switch to generic compatibles
- hi3660: convert comments to kernel-doc notation
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmHeb5AACgkQf9lkf8eY
P5Vb9A//Q0a3TGr2NuRrgWy1JETOVTsbhDQXqMwkUJggyjXHQheXPLthh7NWAaCQ
GDE7YBBImNVlkRZs7RevhTTN+IKfVDI9LzQnNODtm4ADvLPQvehN2xWieAORlJpb
SYRJR1jQEcDPTk36C5EQNYQJvyIInXZvuBcRQHtyic7rbyCuxoTR4VFAj+ufmqRI
NWk6vNr588lX1zOVy75/YPW7rzijUh709GFdArTdD2SqoQlOH/C1zUkpufpIBFvt
b1REcOhhrTz1vZ96UnCeGBUKLjcQbWv8/fFODHmEdz//+Rl62GgI4SNuEUJ50b6n
SSjAtf85r+de5f0Js4JnEIj+V9DcTjr3eVDaMYkQX/DQdzWVFl3jhXkXAFAKc6T2
fzyPwdRgSAqwwweZkgX9OfH0TahS53qh6tleNXUufSWXVYkecbCC2/IRoymc3QAM
sEPvmok4NAooP636cMRTD0deBYx0BO3/UWGm258hwRfpgMjjzQPiRiIRoeA5tiXt
mjSPcljVNFbr2TQvPenJ0yjaBTiAJM7BV9bHeguprCYPPp4nNccr0q6MUmGDQlg+
xdc4xUiARzumTI/uhcTTBYX92uXLBeEAwtisRUbXxrcnH3PIPVIffIyS15J++2M6
Gl3AlBPFc1Tt+0sKorzgcDlbmrT+creEVdVRxRstQ1qnWZUcSQM=
=8ZvF
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: misc updates to qcom-ipcc driver
- mpfs: change compatible string
- pcc:
- fix handling of subtypes
- avoid uninitialized variable
- mtk:
- add missing of_node_put
- enable control_by_sw
- silent probe-defer prints
- fix gce_num for mt8192
- zynq: add missing of_node_put
- imx: check for NULL instead of IS_ERR
- appple: switch to generic compatibles
- hi3660: convert comments to kernel-doc notation
* tag 'mailbox-v5.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: Add more protocol and client ID
mailbox: qcom-ipcc: Support interrupt wake up from suspend
mailbox: qcom-ipcc: Support more IPCC instance
mailbox: qcom-ipcc: Dynamic alloc for channel arrangement
mailbox: change mailbox-mpfs compatible string
mailbox: pcc: Handle all PCC subtypes correctly in pcc_mbox_irq
mailbox: pcc: Avoid using the uninitialized variable 'dev'
mailbox: mtk: add missing of_node_put before return
mailbox: zynq: add missing of_node_put before return
mailbox: imx: Fix an IS_ERR() vs NULL bug
mailbox: hi3660: convert struct comments to kernel-doc notation
mailbox: add control_by_sw for mt8195
mailbox: mtk-cmdq: Silent EPROBE_DEFER errors for clks
mailbox: fix gce_num of mt8192 driver data
mailbox: apple: Bind to generic compatibles
dt-bindings: mailbox: apple,mailbox: Add generic and t6000 compatibles
|
||
|
Linus Torvalds
|
455e73a07f |
We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support. Per usual (or maybe just recent trends), Qualcomm gains a
handful of SoC drivers additions and has the largest diffstat. After
that there are quite a few updates to the Allwinner (sunxi) drivers to
support modular drivers and Renesas is heavily updated to add more
support for various clks. Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock
drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers
-----BEGIN PGP SIGNATURE-----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=jB+l
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
|
||
Huang Yiwei
|
869b6ca39c |
dt-bindings: mailbox: Add more protocol and client ID
Add more protocol and client ID which can be used in device tree properties. Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
Stephen Boyd
|
4afd2a9355 |
Merge branches 'clk-ingenic' and 'clk-mediatek' into clk-next
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
* clk-ingenic:
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
* clk-mediatek:
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
|
||
|
Stephen Boyd
|
1d0bd126d9 |
Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into clk-next
- Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations |
||
|
Stephen Boyd
|
f691c9b526 |
Merge branches 'clk-nvidia', 'clk-imx', 'clk-samsung' and 'clk-qcom' into clk-next
* clk-nvidia: clk: tegra: Support runtime PM and power domain clk: tegra: Make vde a child of pll_p on tegra114 * clk-imx: clk: imx8mp: Fix the parent clk of the audio_root_clk clk: imx8mp: Remove IPG_AUDIO_ROOT from imx8mp-clock.h clk: imx8mn: Fix imx8mn_clko1_sels clk: imx: Use div64_ul instead of do_div clk: imx: imx8ulp: set suppress_bind_attrs to true * clk-samsung: clk: samsung: Add initial Exynos7885 clock driver clk: samsung: clk-pll: Add support for pll1417x clk: samsung: Make exynos850_register_cmu shared dt-bindings: clock: Document Exynos7885 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos7885 CMU clk: samsung: exynos850: Add missing sysreg clocks dt-bindings: clock: Add bindings for Exynos850 sysreg clocks clk: samsung: exynos850: Register clocks early clk: samsung: exynos850: Keep some crucial clocks running clk: samsung: exynos850: Implement CMU_CMGP domain dt-bindings: clock: Add bindings for Exynos850 CMU_CMGP clk: samsung: exynos850: Implement CMU_APM domain dt-bindings: clock: Add bindings for Exynos850 CMU_APM clk: samsung: Update CPU clk registration clk: samsung: Remove meaningless __init and extern from header files clk: samsung: remove __clk_lookup() usage dt-bindings: clock: samsung: add IDs for some core clocks * clk-qcom: (25 commits) clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time clk: qcom: turingcc-qcs404: explicitly include clk-provider.h clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h clk: qcom: mmcc-apq8084: explicitly include clk-provider.h clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h clk: qcom: gcc-sm6350: explicitly include clk-provider.h clk: qcom: gcc-msm8994: explicitly include clk-provider.h clk: qcom: gcc-sm8350: explicitly include clk-provider.h clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller clk: qcom: Add clock driver for SM8450 clk: qcom: Add SDX65 GCC support clk: qcom: Add LUCID_EVO PLL type for SDX65 dt-bindings: clock: Add SM8450 GCC clock bindings dt-bindings: clock: Add SDX65 GCC clock bindings clk: qcom: rpmh: add support for SM8450 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8450 clk: qcom: smd-rpm: Drop binary value handling for buffered clock ... |
||
|
Stephen Boyd
|
151768f348 |
Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into clk-next
* clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers |
||
|
Stephen Boyd
|
270bbc7253 |
Merge branches 'clk-doc', 'clk-renesas', 'clk-at91', 'clk-cleanup' and 'clk-debugfs' into clk-next
* clk-doc: clk: Gemini: fix struct name in kernel-doc clk: zynq: pll: Fix kernel-doc warnings clk: imx: pllv1: fix kernel-doc notation for struct clk_pllv1 * clk-renesas: (31 commits) clk: renesas: r9a07g044: Add GPU clock and reset entries clk: renesas: r9a07g044: Add mux and divider for G clock clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro clk: renesas: cpg-mssr: Add support for R-Car S4-8 clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions dt-bindings: power: Add r8a779f0 SYSC power domain definitions clk: renesas: r9a07g044: Add TSU clock and reset entry mmc: renesas_sdhi: Simplify an expression mmc: renesas_sdhi: Use devm_clk_get_optional() to obtain CD clock dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0 clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple() clk: renesas: cpg-mssr: Check return value of pm_genpd_init() clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple() clk: renesas: rzg2l: Check return value of pm_genpd_init() clk: renesas: r9a07g044: Add RSPI clock and reset entries clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV clk: renesas: rzg2l: Add CPG_PL1_DDIV macro mmc: renesas_sdhi: Parse DT for SDnH mmc: renesas_sdhi: Use dev_err_probe when getting clock fails ... * clk-at91: clk: lan966x: Extend lan966x clock driver for clock gating support dt-bindings: clock: lan966x: Extend includes with clock gates dt-bindings: clock: lan966x: Extend for clock gate support clk: gate: Add devm_clk_hw_register_gate() clk: lan966x: Add lan966x SoC clock driver dt-bindings: clock: lan966x: Add LAN966X Clock Controller dt-bindings: clock: lan966x: Add binding includes for lan966x SoC clock IDs * clk-cleanup: clk: stm32mp1: remove redundant assignment to pointer data clk: __clk_core_init() never takes NULL clk: clk_core_get() can also return NULL clk/ti/adpll: Make const pointer error a static const array * clk-debugfs: clk: Enable/Disable runtime PM for clk_summary clk: Emit a stern warning with writable debugfs enabled clk: Add write operation for clk_parent debugfs node |
||
|
Linus Torvalds
|
c288ea6798 |
gpio updates for v5.17
- new testing module: gpio-sim that is scheduled to replace gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the fwnode
interface and limiting any references to OF symbols to gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT
happy
- generalize the common 'ngpios' device property by reading it in the core
gpiolib code so that we can remove duplicate reads from drivers
- allow line names from device properties to override names set by drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around the
subsystem
-----BEGIN PGP SIGNATURE-----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=OUhL
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
|
||
|
Linus Torvalds
|
bb4ed26e7e |
SoC: Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHE4/wACgkQmmx57+YA GNlSlRAArOIWkgB8Uwf2dz1tdyGNo6b0yqrqPBnc2hlafQVkrd/Cy0imIEt21pJk IkVviuuJmWMS7lFppvjoKbTZDvGt4gcA2o//NorBtSLV5G7mbJAMkeDtfdURRAb0 c7IXbtHaI5qMPHXOzjbKTHedbLJpS2P1uXQtGr9hiZFP8ZfyfbEF1bzL0edcCAWi DuY7cpEHEzeKATN8NQ1ETwpx0MJBfp7pzyfQbB9I1VvIMX1qbuLBUUJ6snLGSiw1 kvLrQoV+2ZISeEfQ8M/PoHpHexO7CzY0thlTFt2mThLVI0ZlaVJvI6oJDAX5AG67 tsmDiBxzvp+gWx5T8TfCgETJOVPUpNpSodF8U+cvIIpZM+DLiDc3Dyu6Zrod5guZ y989Sc+Be1LZEEyy0VscCoDleNxuFohh8aNJZnRtzd5UfJnz7cDIfGUdS2hwP9JN vI7Ci4nQIcvG35RwnLVMOp1azm3RIv2xoESdLkbS9/4smNEjLT1xtr6uVcP+MIKE qsWh8TITRWF4aiFqmsz1JyTHFAL0cCi4lZM//Y6XGKM2z0sCmpbfHIEGhJWuSNme lXvqn62VfiA5CvSnijYMwtRnCKIDDhsjvQo6H0gxCqW6ynCnKAivL/yo65hqtQO8 wBpmlziU7IXx4Js/1eGpF7zq7a9LHFqFnKCrE/+7hK/DPGF2Qck= =X5uk -----END PGP SIGNATURE----- Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option |
||
|
Linus Torvalds
|
aca48b2dd1 |
ARM: SoC devicetree changes for v5.17
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
||
Sam Shih
|
4470c830f9 |
clk: mediatek: add mt7986 clock IDs
Add MT7986 clock dt-bindings, include topckgen, apmixedsys, infracfg, and ethernet subsystem clocks. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217121148.6753-3-sam.shih@mediatek.com Reviewed-by: Ryder Lee <ryder.lee@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Paul Cercueil
|
51d04bcfb8 |
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
The Ingenic JZ4760 and JZ4770 both have an extra DMA core named BDMA dedicated to the NAND and BCH controller, but which can also do memory-to-memory transfers. The JZ4760 additionally has a DMA core named MDMA dedicated to memory-to-memory transfers. The programming manual for the JZ4770 does have a bit for a MDMA clock, but does not seem to have the hardware wired in. Add macros for the MDMA and BDMA clocks to the dt-bindings include files, so that they can be used within Device Tree files. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211220193319.114974-2-paul@crapouillou.net Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Nobuhiro Iwamatsu
|
ffa81a0326 |
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
Add device tree bindings for SMU (System Management Unit) controller of Toshiba Visconti TMPV770x SoC series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211025031038.4180686-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Aswath Govindraju
|
04ce4a6b9b |
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
There are 4 lanes in the single instance of J721S2 SERDES. Each SERDES lane mux can select upto 4 different IPs. Define all the possible functions. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/0571fd6b-ec4d-71b3-5cf7-6fa48ed5592c@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
e75a58db41 |
phy-for-5.17
- New support:
- Qualcomm eDP PHY driver
- Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support
- Lan966x ethernet serdes PHY driver
- Support for uniphier NXI & Pro4 SoC
- Qualcomm SM6350 USB2 support
- Amlogic Meson8 HDMI TX PHY driver
- Rockchip rk3568 usb2 support
- Intel Thunder Bay eMMC PHY driver
- Freescale IMX8 PCIe phy driver
- Updates:
- Cadence Sierra driver updates for multilink configurations
- Bcm usb2 updates for Phy reg space
-----BEGIN PGP SIGNATURE-----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=29yF
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.17
- New support:
- Qualcomm eDP PHY driver
- Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support
- Lan966x ethernet serdes PHY driver
- Support for uniphier NXI & Pro4 SoC
- Qualcomm SM6350 USB2 support
- Amlogic Meson8 HDMI TX PHY driver
- Rockchip rk3568 usb2 support
- Intel Thunder Bay eMMC PHY driver
- Freescale IMX8 PCIe phy driver
- Updates:
- Cadence Sierra driver updates for multilink configurations
- Bcm usb2 updates for Phy reg space
* tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
phy: cadence: Sierra: Add support for derived reference clock output
dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock
phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration
phy: cadence: Sierra: Add support for PHY multilink configurations
phy: cadence: Sierra: Fix to get correct parent for mux clocks
phy: cadence: Sierra: Update single link PCIe register configuration
phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation
phy: cadence: Sierra: Check cmn_ready assertion during PHY power on
phy: cadence: Sierra: Add PHY PCS common register configurations
phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation
phy: cadence: Sierra: Add support to get SSC type from device tree
dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode
dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names
phy: cadence: Sierra: Prepare driver to add support for multilink configurations
phy: cadence: Sierra: Use of_device_get_match_data() to get driver data
phy: mediatek: Fix missing check in mtk_mipi_tx_probe
phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
phy: phy-mtk-tphy: use new io helpers to access register
phy: phy-mtk-xsphy: use new io helpers to access register
phy: mediatek: add helpers to update bits of registers
...
|
||
Swapnil Jakhade
|
637feefb8a |
dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock
Add clock ID for Sierra derived reference clock. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223060137.9252-15-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Swapnil Jakhade
|
253f06c7b1 |
dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names
Rename SSC macros to use generic names instead of PHY specific names, so that they can be used to specify SSC modes for both Torrent and Sierra. Renaming the macros should not affect the things as these are not being used in any DTS file yet. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223060137.9252-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Greg Kroah-Hartman
|
1bc4deedc2 |
interconnect changes for 5.17
Here are the interconnect changes for the 5.17-rc1 merge window consisting of new drivers, minor changes and fixes. New drivers: - New driver for MSM8996 platforms - New driver for SC7280 EPSS L3 hardware - New driver for QCM2290 platforms - New driver for SM8450 platforms Driver changes: - dt-bindings: interconnect: Combine SDM660 bindings into RPM schema - icc-rpm: Add support for bus power domain - icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check - icc-rpm: Define ICC device type - icc-rpm: Add QNOC type QoS support - icc-rpm: Support child NoC device probe - icc-rpm: Prevent integer overflow in rate - icc-rpmh: Add BCMs to commit list in pre_aggregate Signed-off-by: Georgi Djakov <djakov@kernel.org> -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJhxGkPAAoJEIDQzArG2BZjsRwP/3nr3s4b60PZ9hoxSxcBmmoD OAwd1tIeyXGxkeKHeJDdDj92hvgdvZwpl/H+wLnzy4VZmNqrIkREl23KaSlLeJE7 P4U0ZUj7DYqXhR6+D1MiWa8+2rzQ/kqbDiXsFPEQL5Wa2/rGVgq95D/znz5Szv6f EtZUDBBtzR9s56LlL9+pprApWRz4+bf4YfX6AsMuKaKedjqzEKxLov2+wC+6zGoV 2vkFQODxntsoZ95cwRz6GVBAZle/6O/NiSc6ndx/MpPhIQpsr2F0Er1nsgERxDum EsC3JVl+7aoHTym7npFp/JT04YBpHC3l7SnJff0EDws7MSiBjkp1WNIlYwP5juuA PZ3ziLtSzy36Vi0OVpykZSdwbeS9lNuz58CI74fIzcfGA1H1q3s8K4JHS7WMcgsQ EgghbCaiREZKBhZa6gMn4d6cufTpqAImDYae8gD788ziw7x+Pr3P6RgWbn+PE7mI odlx3OKwnCIsDPTj+5B5rXFKkfzV7grX1HI0sUZDIJ8Cv4Qs1kcLWP6Sg4ZafOMj ZcwYoTo9dMy81aDfEKIlpXR2ILxcb4vJTNTSdmFsPmNX+01X8rPlk/uCPPx9nClW acpqJLfCMKKbSwoZwrkWZQo2XCJBq/jan5dg8Q/fMLsqDORUtmnkK+hzR75mHHhP IydRk18TN1TQUhnNiFcd =dXxk -----END PGP SIGNATURE----- Merge tag 'icc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.17 Here are the interconnect changes for the 5.17-rc1 merge window consisting of new drivers, minor changes and fixes. New drivers: - New driver for MSM8996 platforms - New driver for SC7280 EPSS L3 hardware - New driver for QCM2290 platforms - New driver for SM8450 platforms Driver changes: - dt-bindings: interconnect: Combine SDM660 bindings into RPM schema - icc-rpm: Add support for bus power domain - icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check - icc-rpm: Define ICC device type - icc-rpm: Add QNOC type QoS support - icc-rpm: Support child NoC device probe - icc-rpm: Prevent integer overflow in rate - icc-rpmh: Add BCMs to commit list in pre_aggregate Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add QCM2290 driver support dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support interconnect: icc-rpm: Support child NoC device probe interconnect: icc-rpm: Add QNOC type QoS support interconnect: icc-rpm: Define ICC device type interconnect: qcom: Add SM8450 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SM8450 DT bindings interconnect: qcom: rpm: Prevent integer overflow in rate interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate interconnect: qcom: Add MSM8996 interconnect provider driver dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings interconnect: icc-rpm: Add support for bus power domain dt-bindings: interconnect: Combine SDM660 bindings into RPM schema interconnect: qcom: Add EPSS L3 support on SC7280 dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280 |
||
Akhil R
|
9f01881bea |
dt-bindings: gpio: Add Tegra241 support
Add the port definitions for the main and AON GPIO controllers found on Tegra241 (Grace). Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> |
||
Arnd Bergmann
|
c03b7ba969 |
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1, aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses, TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and USB currently supported. SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are described as thermal zones. OnePlus devices gains msm-id and board-id, to facilitate a single firmware image for the multiple devices. On SM8350 the Sony Xperia 1 III and 5 III, as well as initial description of Microsoft's Surface Duo 2 are introduced. On the platform side, LLCC, QUP nodes, redistributor stride and all the low-speed QUPs are added MSM8996 gained various regulator fixes, and adsp firmware name to faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained touchkey controller definition. On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and regulator definitions, USB, eMMC and SD-card and a simple-framebuffer description. MSM8916 has the mmc aliases corrected, to stop the storage devices to move around and the RPM sleep stats memory is described. Support for the Samsung J5 2015 smartphone is introduced. SM6350 validation errors are fixed and and description of the audio, compute and modem remoteprocs are added. A couple new revisions of the SC7180 based Google devices are added. The SC7280 platform gains venus and a few fixes. The CRD development device is introduced, with the EC, touchscreen and touchpad. On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based on CPU frequency, are added. As is TX, RX macros and SoundWire blocks and used to enable audio on the SM8350 MTP. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHDQQobHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FzJAQANU2GokY9/BRKTNJjZFj CIvSBWpBD6wAzqdWqIJBRSbhWDO58Oyu1qRMOw5iylKCqkb89vbcKorpwq6/8l7j Sttox8iRtd/N5GqgwwFB109DSWs6TqRd4rnbYd9au3c21RSLYYgLa1v9f6OobdZi vbY6DQBTHYYClLPYvn5iUMy6JGTFsR5EAjcEJj0cZ1178tKP0Do38Hldeo/wvX37 oqA1GXG3uCtbYKG+gJcNSfwvOo9q0ki5oacGuUWVOWkL+Vj2LiMbhhzDJlu8tF8M VzAy3o6UN2+hquJVxQsfs5wfgcLVK/IdMyjiaEe5GZd9SWmtSt4n+CUQ0ZkDPBfR KkIOci4M0WoHlmY/IPELS9MfDxdDeJn+u8v8jpM/vEZMOSCZiBFcvNPPD7aBP9VK c+f8eVf21NGxfZ4zA9bkp9aBACyv4zfjo/iFd3TmT1P78sDOJMI7pG3APHOYY9Fc ZKT9uTcca9KgVzTZcLzvD69OudrHP9pw6QdT4OT1fy/EPtj2+9hHN+cfty+iAtDN sgIcFmWBryO6OctgF+CA/FuojYi6PB2WOfvECljnmQwfIxDnz/6EGbbG97yH0FZr TE4BasLkdQZZPrTxgj1kpu++CrkFeUhpsEciQjDxYoCJ3mFAXNws6prxKpTh1jcg dalfKkiEX1ww3WsfciUb0X/V =/hGD -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DeviceTree updates for v5.17 This introduces initial support for the brand new Snapdragon 8 Gen 1, aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses, TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and USB currently supported. SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are described as thermal zones. OnePlus devices gains msm-id and board-id, to facilitate a single firmware image for the multiple devices. On SM8350 the Sony Xperia 1 III and 5 III, as well as initial description of Microsoft's Surface Duo 2 are introduced. On the platform side, LLCC, QUP nodes, redistributor stride and all the low-speed QUPs are added MSM8996 gained various regulator fixes, and adsp firmware name to faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained touchkey controller definition. On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and regulator definitions, USB, eMMC and SD-card and a simple-framebuffer description. MSM8916 has the mmc aliases corrected, to stop the storage devices to move around and the RPM sleep stats memory is described. Support for the Samsung J5 2015 smartphone is introduced. SM6350 validation errors are fixed and and description of the audio, compute and modem remoteprocs are added. A couple new revisions of the SC7180 based Google devices are added. The SC7280 platform gains venus and a few fixes. The CRD development device is introduced, with the EC, touchscreen and touchpad. On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based on CPU frequency, are added. As is TX, RX macros and SoundWire blocks and used to enable audio on the SM8350 MTP. * tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits) arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes arm64: dts: qcom: sm8450: add cpufreq support arm64: dts: qcom: sm8450: Add rpmhpd node arm64: dts: qcom: sm8450-qrd: enable ufs nodes arm64: dts: qcom: sm8450: add ufs nodes arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes arm64: dts: qcom: Add base SM8450 QRD DTS arm64: dts: qcom: sm8450: add smmu nodes arm64: dts: qcom: sm8450: Add reserved memory nodes arm64: dts: qcom: sm8450: Add tlmm nodes arm64: dts: qcom: Add base SM8450 DTSI arm64: dts: qcom: ipq6018: Fix gpio-ranges property arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node arm64: qcom: dts: drop legacy property #stream-id-cells Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer" ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
dfdded9b0b |
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHBVYobHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FruwQAIkncBLbeVIk2ioM7xEH WRpd5yDczi2LVsXaDCjmCu9s4MMMaDYYUiQWSh1etovEdN+x8t4R8gzeNYDkZNX3 T0g3+x7bL0xjynQo4HEje8fzYZryCmWZfmYbqggawLWynUDXyYLSNFh+bxKEFpLw uxOiNXzmTRZQhNUE60JV2BJCNuZls+pjthURbTAGWZ/LoBhgW6RjADOqGHVz1eF0 RIz8YPRaVN0lTrBxPAwwJDJ4AWo5nG5zNiy0/0fxnxabvr32N/2YBl2dCJ3hMgZB /OIsMS21b2wYbOR59NgD/vauGXUeGnophcWnMmIEPA9D/ZiJiKYNteWLfEbUNKnC sy/XXZbo0y+uHBIxFsmg8m4Dh5WBmkAgoINwEZ/0BFTVoCbQq6Oi8xnkkvPc61L1 r/ZUpFr13xzV3s1e2dSPAlgW3P7WfgTyXTN/5YkNi4dT47uD71EiHTDvcUEocFcg gPyjm4SSRo/1HUqPOJMeFnVx5mv4cCo2OrnkQWKaCENgWg07wFq3lXJjOB666jMF OEXRKPmH8tA3eVexy0tayO1bps/Go2MGjERtRxz/EUw8UDWO/0SerhplYD/vMmFU NLOWbwIAUoJT5daiAsUYJQr1KBnJMlkFsim0Nd962rKZTX4F5cKkkJv8ucrwN+01 SZoQVfDBHlZtMuMsJn/Sxqk/ =SjjW -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHB5qAACgkQmmx57+YA GNkkxxAAw0GqWdbEiF2rNpTHsZgJnsDJpIfxFgONdzVA6C4pDi2YUlp5GgKitBzQ zok21TebNPTNOEf7q8FqubpleDU+x913eJaYYQA8DRmx5fHeNkzYt6jMAE5c3V5Y fpcRSLV0GLiT48tzhK/r3917/jZWnjcp7eKWDWByyavzkphgcVTbqYYBYZVltkzH s/nyIu8zdSvCmOLMipRrH85GSVi372DU6bD/ejHdz0yXv/RsT2/2DZA6ZeJSF3FQ qpZEnGxnizGrqcP6b3g6xVjVEYmwHC8js3B8scUyM/I9j+h/LAQD8yRXLivj5kwm tM/mtCGaIfux3ca1B0cRe5DTZP3jPa7vKUmIxTVJsjfgKyco9vwJlPIyHdSBKqQQ n7HtB2jBruCjb2IhtHjhCC0htPKFpEUs6k1SK3UB+I3usEfMhut/FC5RFU9Pz6ta GtQ8k6ucdJySQDxgOF62EFqEjQmcDNOqTl07rgosXx4zrh4TYNlvW6v6/N3QblPp 8eRQGgK6HZMAypL1HgeEeYtYhK6eyRCfmNrQ+U2w1o/VRsRwwsLC6g4YENyEYm+1 yVQjPyEgo9KZah3tYtc8pxAGs3E6ulyHMhBZtHh1gWjSNyDTEBvYjcuKE1Javxmh dRRgIoymJG1f7b5zACkimDuvB5A4DOJ6pUvpvpad6Cv724J7ixA= =rvAi -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DeviceTree updates for v5.17 To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. * tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Drop input-name property ARM: dts: qcom: sdx65: Add pincontrol node ARM: dts: qcom: Add SDX65 platform and MTP board support dt-bindings: arm: qcom: Document SDX65 platform and boards dt-bindings: clock: Add SDX65 GCC clock bindings ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32 ARM: dts: qcom: sdx55-t55: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable PCIe EP ARM: dts: qcom: sdx55: Add support for PCIe EP ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY ARM: dts: qcom: sdx55: Add support for PCIe PHY ARM: dts: qcom: update USB nodes with new platform specific compatible Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
13ee75c7b5 |
Qualcomm driver updates for v5.17
This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHBUg4bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FObUQAOCTBSbL/US0wCCUEHPq MScjFtPDAV88bJi9uRzi5lalwPd/3yPZu+XLcCV/CjRj6nlGAbua2EcogvMsM1Lj rgHZopKnnDOHEFII2ZZ3lyJN4EntvSGHtnm/i2Jd7n3nB52zBkuRpgn3mi32QWoL QmGECClAPFBlQi9P33yHDZ/XC8ZK1y982G+Pb8SD6guxmtGxXCm4SaZ4qwVya53s euBl+nT/snARPEwaqRoGIsvs+fH2BcoJbug19MLQ+3Q4K9ycxQkWalzcMsLM/EjT H1JGjoaHbTpNhyMmKDqN2jS0CkvoLiYOIvhAbqw6l2HluRkn8QhcDOJJ9RHl2oB/ EqYkK457F7smA0Z9vViuaEZJWfyPNt0z2c7zcpf73Iuk8cBM+48MUQ1UOwyvQh3c 8AeyyAkgyYBWv58h5rLDS2fqD+tWx4hz6tqxyYojsxYjQkyWRDU6540tGSDeVAt+ SUQ9qFXWyG7R5Z3GBVHi7ztXnkl6vYZUF05fhZrkpw9YrGlmu3wK/3Rcg9ZIECOg Q0UA/GQsqQtCqmzkRQsur/ljEbCrmtiB6JvG+7cnQIWPwcN/4Ho3wyfXvtzNvNki dMIpd+7NKkTaj1HUaH5qEnyO4szUpMoFfOrtqzlucH5dGG6fppY3svVWzuxLcbDy 8+b+/aDuWa7HUXpBbPaK7H7U =ovup -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHBy8wACgkQmmx57+YA GNmS3xAAhIPIdMWF76Gb7eQu0UWrbuACSl0Nkt5SRbRyjX0BHectf+ssXUzR6r2/ l8Uf2fkBYP5UWVUbWXlKPlmwmdQo/lAGYeHvi/lx3W4ORvIe6CRTeIS0q0DLPwSV H7iH8lnoFozIITt+6N+LhN9VME/Zpo8E/t2Wt47mkSkV/2hP6Adrgh5f4pz4KMcl hHQcAhi0/3DTEoGjczBDcTXMIt8nUPSwTnd1ktOaD0avRgKgiiLslvzjTxLMXRuw aDInx8uIMBswbEE0ZtG1aFrYZ54Y3DAm65n4aZfOPo3OlLjiosOqT1pvKWkpF/u1 OYcQzVEdUnEwZKB9BYzkTFVtK3ptE/5nNFg4HkclZATrqvEfQ6I3EbM9tvtY6GV+ BUUjxOthWq0Rnazd3BkOJvsepSndB1dOfxAunBk6m/r44shWWjLKGRI3jd+0QgW2 UVd0hy5pC28OZelGgSAU0PVQyHYl/82pRu7UCpHVaOg9mvuwgURChr7ddGi9XWVG cMChFAumH/hvnQrRavONPUqaTjP62hRkOqjA/bvc3jFuAgFWqvSrc+z1AvqKw4Uz 0ks+tjoHrQ839EZB0g/LDk7K8MDe8llvOk16gzqNxplQJe2WYaRZ9S0GD+3MC1Wz sSIyMsFLhfZJ2Z7TNOqLTPPW3jfoU3ntNzHUY8gCpTSh8DVkbtQ= =NlpZ -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.17 This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. * tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ... Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Dmitry Baryshkov
|
22c755708c |
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
Add compatible and constants for the power domains exposed by the RPMH in the Qualcomm SM8450 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201072745.3969077-6-vkoul@kernel.org |
||
Martin Botka
|
8712107740 |
dt-bindings: qcom-rpmpd: Add sm6125 power domains
Add dt-bindings for sm6125 SoC RPM Power Domains Signed-off-by: Martin Botka <martin.botka@somainline.org> [bjorn: Added compatible to binding as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211130212332.25401-1-martin.botka@somainline.org |
||
|
Arnd Bergmann
|
0fd319105f |
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
-----BEGIN PGP SIGNATURE-----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=A5Of
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qF6s
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
33f8b4862a |
i.MX arm64 device tree change for 5.17:
- New SoC support: i.MX8 ULP. - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2, i.MX8 ULP EVK. - A series from Adam Ford to enable Camera and USB support for imx8mm-beacon device. - Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. - A series from Biwen Li to update LS1028A devices around RTC, flextimer and PWM support. - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M devices. - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet PHY and I2C1 pad configuration. - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3 dtsi for Librem5 devices. - Add cache descriptions for i.MX8 SoCs. - A series from Vladimir Oltean to update ls1028a-rdb device tree in order to share the DTS between Linux and U-Boot. - Random device addtion to various i.MX8 and LX2160A based devices. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9hc4UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5tZAf/chwOQUH6gwyc76vb2mzcMlYq4jPN vMxJZ6fJBf+QglOrGfSznl11SHNCGs+NBDvRkJt9JLKj1fHh/jUTZf5HCRnK62lH YB+w2XxlthufTPujkVXM10Dsx65Up67Mo3ZN5/3M6Fd+w/P8YUzPEL0jD2dm7CDM rKqe57kcJ6ZaJgASuPdVh51fwpmbCNOQZCRgg4Y+sunXzUVyjA/jOUaeQojg+m2e TTe80CH+3fugipWkotAa8ypxAJEbeEsPvVB711UxTY28rE2BqDkcPMyOiq+9HW+M AoqPeyeZffyJGwLblLCQTZzMEuWU9G87H+fda7b8sg7yFPvjefaj+4DbdA== =ARjB -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAm/QACgkQmmx57+YA GNk/4g/9GG9YYbOHzLDSit6I92eAwMhIxCE7ls2RrB/JBIi1v13qZ85YTPw9w1Bc klRXP46fI6dVl7R7t0Vt2zt5MpuNnKAMZsHQR+UvB/Zll4RC7n29NEpWyFW0i4Yv /G28Whmp1sQs8szrWwvOlxWMY3fSlQMKM4vrtJUU6Che5ec+PwgsRL2rWf5/cnJh E9HqQ3eJMyP8cdayRnlUCI8yWAdXHkeDQhl7Mu97eX4l7Ka2OkDseEZY+HgRmQSv Ee3X1EPxFHau9f842NtIwNz54Vdibfh+UHCzMeWOtDZXF8bhWVYp13joPNDM7AWM 0oYMh966t/JuU4cPCQxed61C9Laxg42TkCbfuU7dC5pqKlCdSZSKOmLe7c6vw3Vf IGQwVgMh8/c3oJAbbPqWz+kfCg3O2KNzA3MnsQuizoLEwa5R4msqtk6FZ5uqR6d/ RYL9eZKzeZWPXwth1KCEx+qLFWuRxC5cdK181Hc/Srm3bzNf/6vfCcReRCvlfOiE lU1kzHLOKtfUeWSEK3WFnWuTbU68NaH8rUZXpuTlV1kYEeBf/mD4aTOUW9hOh0v6 EYwpk2QYPBcUUYR2KC6gfyJTTwihn3FR8+RiJR+VFjlhNrNHbrNmp3Vo19yjgu/Y brbFPEitQPnvXdrGAIfck9vHhO9VJ3xygo9SMowGsaRuFLunW/0= =zQ1O -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 5.17: - New SoC support: i.MX8 ULP. - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2, i.MX8 ULP EVK. - A series from Adam Ford to enable Camera and USB support for imx8mm-beacon device. - Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. - A series from Biwen Li to update LS1028A devices around RTC, flextimer and PWM support. - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M devices. - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet PHY and I2C1 pad configuration. - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3 dtsi for Librem5 devices. - Add cache descriptions for i.MX8 SoCs. - A series from Vladimir Oltean to update ls1028a-rdb device tree in order to share the DTS between Linux and U-Boot. - Random device addtion to various i.MX8 and LX2160A based devices. * tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits) arm64: dts: imx8mp-evk: configure multiple queues on eqos arm64: dts: ls1028a-qds: add overlays for various serdes protocols arm64: dts: ls1028a-qds: enable lpuart1 arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus arm64: dts: ls1028a-rdb: enable pwm0 arm64: dts: ls1028a: add flextimer based pwm nodes arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source arm64: dts: ls1028a: Add PCIe EP nodes arm64: dts: lx2162a-qds: add interrupt line for RTC node arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes arm64: dts: lx2160a-qds: Add mdio mux nodes arm64: dts: lx2160a: add optee-tz node arm64: dts: lx2160a-rdb: Add Inphi PHY node arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl arm64: dts: nitrogen8-som: correct network PHY reset arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property arm64: dts: imx8ulp: add power domain entry for usdhc ... Link: https://lore.kernel.org/r/20211218071427.26745-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
990102a792 |
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms: - J721s2 SoC, SoM and Common Processor Board support * New features: - CAN support on AM64 EVM and SK - TimeSync Router on AM64 * Fixes: - Correct d-cache-sets info on J7200 - Fix L2 cache-sets value for J721e/J7200/AM64 - Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200 - Disable McASP on IoT2050 board to fix dtbs_check warnings -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmG8nQoQHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW423oB/wMWRML3F6+LKGkDpm6Dme6oV24NzhnACBl CQ0me3NpQEq4QELPasRwc9E4WOLGCGtDS1HByCrpCELFI7ET9ebwgo7yxl9nvJm+ nzSGwWY9/n3wtXhEc68r0if12WRuu59YTrhf+Q5GNF6uh4iv5aSmAfdSQmUljER5 hs1mZVAQflbxhsG5XR+OUGUvxQZ6Uy8F0OjW++a+ci3QtmQ9y+FUCIMdeLMvXD4C efaWtFtselePPqN3AJMRddAgo/rbzXWBaX57LG8oMz4a223Ima7FpVB0sgzsnYh8 +qG1JqFC88SR9Prjp7n8oaBdopL+ZXOZvernLWonFIGvvodK57ZM =DYkC -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAmXgACgkQmmx57+YA GNlR3g/+MjiqccCspohN8BRhsOTpDtq7NBM+F/oqwKzr9sktpwWeMz6dI1hjPihz spyixzw10lcHdO3me1B8jOV2+Cek8zZzhDHK0tBXZU4AO+lNmgsjyxWs953TMcg8 eklBb3TpocHfGEuJSzPfTAD1B9QRB3Bl7kMztwE9uNKUCJiXCToIs63i/8QaCjIG kNzJOCdndw07h4Ms+6MTlDLbpivFnedU43YyrtYGCovg5tlv02B8452KpbfHAIUf MuuCAIYHm/ZAZa8aOfQ3ZsxwwXCYVu77uG14CTQKChOJeOZ9xzf5WFsRtY4EjJFW bixwAQ9ZxFuFm8vXPz5vHkNh0nDGdHV2LJ7SVCoFZ/zcxXROH8+ol9/XtHsaShRh C5+Ekz8GWvWnVCaeon53vzMXneVRoK6YvxtS1P87uuaM8IH3U8lktmHaJMlD/qdl mGLyJs4GRt3tKdqlLB3FvUb1tWSLSZ84fuRHVb/FXY9M/driZYgGymH7axTWJtSE m3rB2EMvbYWfdV69J8T0JSPmLwRY9lkJxSvnJulXB/J0yuvqHesrXoZHbiqxkZiM adYT/ub6a03yRwoCFowTtOfBGyHOG7SLwrdHQ5dam0dCHjc0SGgJZj+gnHWh0asC +/JMhePTxD1fH0UmElRHY1L1of6iWguWXTFgNZhHUxbCj/z+dSU= =R9bG -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt Devicetree changes for TI K3 platforms for v5.17 merge window: * New Platforms: - J721s2 SoC, SoM and Common Processor Board support * New features: - CAN support on AM64 EVM and SK - TimeSync Router on AM64 * Fixes: - Correct d-cache-sets info on J7200 - Fix L2 cache-sets value for J721e/J7200/AM64 - Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200 - Disable McASP on IoT2050 board to fix dtbs_check warnings * tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arch: arm64: ti: Add support J721S2 Common Processor Board arm64: dts: ti: Add initial support for J721S2 System on Module arm64: dts: ti: Add initial support for J721S2 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 dt-bindings: arm: ti: Add bindings for J721s2 SoC arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK arm64: dts: ti: k3-am64-main: Add support for MCAN arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes arm64: dts: ti: k3-j721e: Add support for MCAN nodes arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes arm64: dts: ti: k3-am65-mcu: Add Support for MCAN arm64: dts: ti: k3-am64-main: add timesync router node arm64: dts: ti: k3-j7200: Correct the d-cache-sets info arm64: dts: ti: k3-j721e: Fix the L2 cache sets arm64: dts: ti: k3-j7200: Fix the L2 cache sets arm64: dts: ti: k3-am642: Fix the L2 cache sets arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node arm64: dts: ti: k3-j721e: correct cache-sets info Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Daniel Palmer
|
e82513696e |
dt-bindings: gpio: msc313: Add offsets for ssd20xd
Add the gpio offsets for the SSD201 and SSD202D chips. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> |
||
|
Arnd Bergmann
|
b87cd3759d |
dt-bindings: Changes for v5.17-rc1
This contains a bunch of json-schema conversions for various Tegra- related DT bindings and additions for new SoC and board support. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmG8sRoTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUpLD/9aTWMH3DhMh2uKpOOt8TOdNiZXLqec GLXFoA3jHNHxEcwOXU6or8Hg4ipZnYgN2tspu2qpI+OvgwsoZcJqu8WAfH+fS2vv 950OmjAdKBTQhiOO1eSo86Kq00orE6TdMQ3NfTUqEKKcjbiAruy+ojuDfFRoutP+ UCe7Vl8CMi++MFmvyKBLu2GoDKb2JoKtoabiCxNwchZH3acgWFMfxeLBWNBj6HqH W7h+uld9MTg1rEZ7P7ZGspiXh9Nzt8e3e2un7j24L0qDI+s8Ur4XOf+Fms4aAMXc Pbme+q4DaA4xcFXVd5kyAKK1f6kYNVNZBHjKMVuPR4zjK4vADAZ2SZ0hFc3pE7hB rZtjwp4TphuwGrwNoXE4koi04GZStwnvp/Wr4BlCSyycY2H1UxMHHgMDWLA4WVVw JM+9uvjvCe0oE7x6+l4usWMVJrQljWH3IU5w4SXyzowYu5cvbWFhqRieFcg8iDbF CnGJGorq6bKJExiIyWtiRR4+m1TGsBq2cNUb1A0qgUTrMq6O2R4AiqSe45wDYSlQ z1zON1LILctiQfyCM2vsDLOe4AEyitzQkRPS9zo7Jn6dPnf9k3knpTDdyDS7vU2A juR3JOTdHuZ6jNBu5ykJbr3EN54D9nXHEGEl5ToHkahXEpJIC5haQOkRYU+OxER0 C+gWIEJcroJkjA== =aSMg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAlSQACgkQmmx57+YA GNkY/g//Wc6o+0wNZ8DBGSvI/3spHcNdSeIFwprmMJyBd1ho30kDL+jBW+5bYekT 5X7GC7E/GkbxfvePQkZtS5+qFFdOV5qtQdjLEf2bQc/RuErnwnLttLBTFQpuBNHh VFjB+KHkEGtGFjjJ6CCnz57M5m+4NBWpIBwtubEygWhopCAb6as/dvi3F6Gso4lq xUhRe7Gx7LiJeqJhQqhGTgLo50oBQOHbXsIKEMuwXDMuhsQnpWVq3srJPr6pfgZi Q4cgE7GTKCe2TE7wDk9wKB5ptK6hntXswN51tFEGZk/5PNjot+64LzIRQ47CjpGm nisGWyT86ksaVZnXZlRvynbedWasrXITL76ccadbF4vqZGe9G07kw5N+i/t05DeN TkvXSBe+4e6q6zAOzrUUCP59R7X+sgC8phYj8al8We7i+Prn5IX+a4Glm4wiOMVv n9j9yRr/YPDrLVDjmqIhESzSmq5IZucbuqi7CW+TeaKrILlMaYcWuxXdAd8H9Ite krT4RxSkM+DJCW0OGIpYH9EtynHpf1HGhlP05wmrSa+quWa8h7WBCS2D9lFk4RU3 1cqV1qHLqL+HctxP0LGS2ajT1sUwkgoshijNlknmlwQW+Wzqu56J1H/+toLrH1XK 20ZALOao6CN344n2A//XVOk0udBShg93KmvTLhv2HQ4SIK5Jlwg= =acJz -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.17-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.17-rc1 This contains a bunch of json-schema conversions for various Tegra- related DT bindings and additions for new SoC and board support. * tag 'tegra-for-5.17-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) media: dt: bindings: tegra-vde: Document OPP and power domain media: dt: bindings: tegra-vde: Convert to schema dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D dt-bindings: host1x: Document OPP and power domain properties dt-bindings: clock: tegra-car: Document new clock sub-nodes dt-bindings: ARM: tegra: Document Pegatron Chagall dt-bindings: ARM: tegra: Document ASUS Transformers dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties dt-bindings: serial: Document Tegra234 TCU dt-bindings: serial: tegra-tcu: Convert to json-schema dt-bindings: thermal: tegra186-bpmp: Convert to json-schema dt-bindings: firmware: tegra: Convert to json-schema dt-bindings: tegra: pmc: Convert to json-schema dt-bindings: serial: 8250: Document Tegra234 UART dt-bindings: mmc: tegra: Document Tegra234 SDHCI dt-bindings: fuse: tegra: Document Tegra234 FUSE dt-bindings: fuse: tegra: Convert to json-schema dt-bindings: rtc: tegra: Document Tegra234 RTC dt-bindings: rtc: tegra: Convert to json-schema dt-bindings: mailbox: tegra: Document Tegra234 HSP ... Link: https://lore.kernel.org/r/20211217162253.1801077-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9593bdfa1d |
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
-----BEGIN PGP SIGNATURE-----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=2Ed8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pxdx
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
* tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: keep SoC driver bindings together
soc: samsung: Add USI driver
dt-bindings: soc: samsung: Add Exynos USI bindings
soc: samsung: exynos-pmu: Add Exynos850 support
dt-bindings: samsung: pmu: Document Exynos850
soc: samsung: exynos-chipid: add Exynos7885 SoC support
soc: samsung: exynos-chipid: describe which SoCs go with compatibles
Link: https://lore.kernel.org/r/20211220115405.30434-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
87e1287614 |
i.MX drivers update for 5.17:
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add i.MX8MN display related domain support. - Add optional continuous burst clock support for imx-weim bus driver. - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and MIX domain. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9dygUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+jwgAle7/Po7Qs0JVrUwkJOWAjNxveXjv keEC5o+svPOLIToX1lA+bY2CKlok2n6IIiEkpbgc+C+prTip0zJnJUFFHxuOeMkl +/EWTthCAddLwXCdmU6c5HSw8XJ9rkH3YDvd46GkPnZuUiZVVmTYkuZQ25qCbPpE f1kCg2RNVruZAOYHmMsoU+WMH3q40dvGSDVXbcHpNZ19qHooUyk/4jcXGlBJKXDo iGosWLdqMy0vbK4cWFzorPFyTpaF1qq/o7AppfexT1h0f6aLnuKnBA5JXY4y4bvd e+6EZ0VwvtdZBqMNaZLHqltCVA/Y0q2gXGryKUM6n7mGdv/LYictLHPudA== =WKrF -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAjj4ACgkQmmx57+YA GNlesQ/9HT8YKAUTsFRYbzKaK0tduZX9eFS8kIF6NlhTqD5IIYhwG4zZGhezRBdM Xt1DztCKqI5/okIn5mtHa/nPOoXd8mElivqt+z/rNIvdB+QkeVbCAOQvHUXeNS1F +sy8PTHLLGZNOGWGzKB4bFtJnc6yawwjz4EukG59cnC+AUePdo3DTT7Xnhf45j+j SSYdG2wgcQ5OW9okKov+AcoupFosrC3Zcuswf2lPcxOfZY0x6yalXXfmerRUZR+g JKTA3bFVLBG2o7nHcJp9ePh0K03+SfaaT5sSAbFm1DxL4hhtcPQJ2uq7I1kVBWKh 8gBAy5Q+dNNZI/OQxM5TGB3EiQ20qBEdkxDxW2bUwAuG+Qyazgv5gRp5doU7FQnP Kl2f3TkM6/KRJNT3RytesTBSynisC9b4BuzpgFtfCBjK4/LEZSzSG07KHhP+k3pT b0FWQlw9+Rvj/stChWZgVRC6G3ALi7NYf5NLrGhsKjEdrAYBHwoh8OniwI4NyqdK 14qWkPb9ctvh6J1IGQ7c2qG+iXSMc9oogG7dmb9Vas2RI/tMeEOJSWdmEY6TZbSP 40e3Wews2RlU+lT8291Kuq2Dyj0YbK7dZ38ymy9cVHKvixr5QUEHxkJzICcDPqPQ rLdy/VwoSSDqkgNGcdXDdestnEXK7xvhgl/u3zT5RkcxfYxA3Q0= =74GG -----END PGP SIGNATURE----- Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.17: - A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add i.MX8MN display related domain support. - Add optional continuous burst clock support for imx-weim bus driver. - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and MIX domain. * tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled bus: imx-weim: optionally enable continuous burst clock soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active soc: imx: gpcv2: Synchronously suspend MIX domains Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Ricard Wanderlof
|
e047d03726
|
ASoC: tlv320adc3xxx: New codec bindings
DT bindings for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151759170.27889@lap5cg0092dnk.se.axis.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Sam Protsenko
|
51b1a57294 |
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
All Exynos850 GPIO blocks can use EXYNOS5420_PIN_DRV* definitions, except GPIO_HSI block. Add pin drive strength definitions for GPIO_HSI block correspondingly. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217161549.24836-6-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
||
David Virag
|
591020a516 |
dt-bindings: clock: Add bindings definitions for Exynos7885 CMU
Just like on Exynos850, the clock controller driver is designed to have separate instances for each particular CMU, so clock IDs start from 1 for each CMU in this bindings header too. Signed-off-by: David Virag <virag.david003@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211206153124.427102-2-virag.david003@gmail.com |
||
|
Sam Protsenko
|
a949f2cf1a |
dt-bindings: clock: Add bindings for Exynos850 sysreg clocks
System Register is used to configure system behavior, like USI protocol, etc. SYSREG clocks should be provided to corresponding syscon nodes, to make it possible to modify SYSREG registers. While at it, add also missing PMU and GPIO clocks, which looks necessary and might be needed for corresponding Exynos850 features soon. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211217161549.24836-2-semen.protsenko@linaro.org |
||
|
Arnd Bergmann
|
527c71547d |
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYbxhigAKCRCKwlD9ZEnx
cOG8AQCFiS+sBx/X7GiG6fshCBhGw4f+9+jsNl2ucQMmUe9YqAEA83HjBLSQ/DnP
h/VI9JfeGdcyTseWFJwXzm8XChcdWwI=
=sQeE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1udU
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Fix pin controller node names
arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator
arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node
arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g044: Add TSU node
arm64: dts: renesas: falcon-cpu: Add DSI display output
arm64: dts: renesas: r8a779a0: Add DSI encoders
arm64: dts: renesas: Add Renesas Spider boards support
arm64: dts: renesas: Add Renesas R8A779F0 SoC support
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
arm64: dts: renesas: Fix thermal bindings
Link: https://lore.kernel.org/r/cover.1639736718.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
Prathamesh Shete
|
a8b10f3d12 |
dt-bindings: gpio: Add Tegra234 support
Extend the existing Tegra186 GPIO controller device tree bindings with support for the GPIO controller found on Tegra234. The number of pins is slightly different, but the programming model remains the same. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> [treding@nvidia.com: update device tree bindings] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> |
||
Adam Ford
|
b77beaaee1 |
dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
This adds the defines for the power domains provided by the DISP blk-ctrl. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Marijn Suijten
|
6d24d9546d |
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
Document the required properties and firmware clocks for gcc-msm8976 to operate nominally, and add header definitions for referencing the clocks from firmware. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211208091036.132334-2-marijn.suijten@somainline.org |
||
Bjorn Andersson
|
fe5cf1c34f |
Merge tag '20211207114003.100693-2-vkoul@kernel.org' into clk-for-5.17
v5.16-rc1 + 20211207114003.100693-2-vkoul@kernel.org The immutable branch contains the DT binding and clock defines as need for the Qualcomm SM8450 global clock controller driver. |
||
Emil Renner Berthing
|
3021114b3d |
dt-bindings: pinctrl: Add StarFive pinctrl definitions
Add definitons for pins and GPIO input, output and output enable signals on the StarFive JH7100 SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
Geert Uytterhoeven
|
810e287e83 |
dt-bindings: reset: Add StarFive JH7100 reset definitions
Add all resets for the StarFive JH7100 reset controller. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
|
Geert Uytterhoeven
|
38bb8a7264 |
dt-bindings: clock: starfive: Add JH7100 clock definitions
Add all clock outputs for the StarFive JH7100 clock generator. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
||
Thierry Reding
|
c3859c1436 |
dt-bindings: memory: tegra: Add Tegra234 support
Document the variant of the memory controller and external memory controllers found on Tegra234 and add some memory client and SMMU stream ID definitions for use in device tree files. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Mikko Perttunen
|
fc5e0e3762 |
dt-bindings: Update headers for Tegra234
Add a few more clocks that will be used in follow-up patches to enable more functionality on Tegra234. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |