9c432404b9
610 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Huacai Chen
|
ad3ff10561 |
LoongArch: Remove shm_align_mask and use SHMLBA instead
Both shm_align_mask and SHMLBA want to avoid cache alias. But they are inconsistent: shm_align_mask is (PAGE_SIZE - 1) while SHMLBA is SZ_64K, but PAGE_SIZE is not always equal to SZ_64K. This may cause problems when shmat() twice. Fix this problem by removing shm_align_mask and using SHMLBA (strictly SHMLBA - 1) instead. Reported-by: Jiantao Shan <shanjiantao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Hongchen Zhang
|
303be4b335 |
LoongArch: mm: Add p?d_leaf() definitions
When I do LTP test, LTP test case ksm06 caused panic at break_ksm_pmd_entry -> pmd_leaf (Huge page table but False) -> pte_present (panic) The reason is pmd_leaf() is not defined, So like commit |
||
Nathan Chancellor
|
8ff81bb24f |
LoongArch: Drop unused parse_r and parse_v macros
When building with CONFIG_LTO_CLANG_FULL, there are several errors due to the way that parse_r is defined with an __asm__ statement in a header: ld.lld: error: ld-temp.o <inline asm>:105:1: macro 'parse_r' is already defined .macro parse_r var r ^ This was an issue for arch/mips as well, which was resolved by commit |
||
Linus Torvalds
|
8e1e49550d |
TTY/Serial driver changes for 6.6-rc1
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
|
||
|
Linus Torvalds
|
df57721f9a |
Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/ gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/ Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA= =3UUm -----END PGP SIGNATURE----- Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ... |
||
|
Linus Torvalds
|
461f35f014 |
drm for 6.6-rc1
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040: Backlight support, magic improved,
Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
Support EDT ET028013DMA plus DT bindings; Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi: Improve support for YUV420 bus format
CEC suspend/resume, update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
- adv7511: Fix low refresh rate
- anx7625: Switch to macros instead of hardcoded values
locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v: Support panel orientation; Support rotation
property; Add support for Jasonic
JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release
of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes
-----BEGIN PGP SIGNATURE-----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=CwV9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
|
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
|
Linus Torvalds
|
b96a3e9142 |
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
||
|
Linus Torvalds
|
1a7c611546 |
Perf events changes for v6.6:
- AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmTtBscRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hHoQ/+IBQ8Xi/rcdd40n8OqEB/VBWVuSjNT3uN 3pHHcTl2Pio9CxBeat42NekNijlRILCKJrZ3Lt3JWBmWyWv5l3KFabelj+lDF2xa TVCjTnQNe1+HvrODYnF4ECIs5vaoMVjcJ9jg8+VDgAcOQr1nZs4m5TVAd6TLqPpV urBEQVULkkzk7ZRhfrugKhw+wrpWFefgGCx0RV8ijZB7TLMHc2wE+Q/sTxKdKceL wNaJaDgV33pZh0aImwR9pKUE532hF1FiBdLuehkh61PZa1L82jzAX1xjw2s1hSa4 eIWemPHJIYfivRlENbJsDWc4N8gk6ijVHwrxGcr4Axu+NN+zPtQ3ddhaGMAyKdTo qUKXH3MZSMIl++jI5Fkc6xM+XLvY1rML62epSzMwu/cc7Z5MeyWdQcri0N9YFuO7 wUUNnFpU00lwQBLbyyUQ3Zi8E0QV7NuPW4axTkmntiIjMpLagaEvVSf6nf8qLpbE WTT16s707t19hUZNazNZ7ONmhly4ALbHFQEH65J2KoYn99fYqy9z68Hwk+xnmykw bc3qvfhpw0MImQQ+DqHiBwb4n4UuvY2WlkkZI3FfNeSG63DaM2mZikfpElpXYjn6 9iOIXvx21Wiq/n0cbLhidI2q/ZzFCzYLCk6ikZ320wb+rhvd7EoSlZil6QSzn3pH Qdk+NEZgWQY= =ZT6+ -----END PGP SIGNATURE----- Merge tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event updates from Ingo Molnar: - AMD IBS improvements - Intel PMU driver updates - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events - Micro-optimize software events and the ring-buffer code - Misc cleanups & fixes * tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call perf/x86/intel: Add Crestmont PMU x86/cpu: Update Hybrids x86/cpu: Fix Crestmont uarch x86/cpu: Fix Gracemont uarch perf: Remove unused extern declaration arch_perf_get_page_size() perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA perf/mem: Introduce PERF_MEM_LVLNUM_UNC perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin locking/arch: Avoid variable shadowing in local_try_cmpxchg() perf/core: Use local64_try_cmpxchg in perf_swevent_set_period perf/x86: Use local64_try_cmpxchg perf/amd: Prevent grouping of IBS events |
||
|
Huacai Chen
|
9730870b48 |
LoongArch: Fix hw_breakpoint_control() for watchpoints
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally. Otherwise we can't set read watchpoint and write watchpoint separately. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
656f9aec07 |
LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
This is a port of commit
|
||
Tiezhu Yang
|
c337c849ab |
LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
The initial aim is to silence the following objtool warning: arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread() According to tools/objtool/Documentation/objtool.txt, this is because the last instruction of arch_cpu_idle_dead() is a call to a noreturn function play_dead(). In order to silence the warning, one simple way is to add the noreturn function play_dead() to objtool's hard-coded global_noreturns array, that is to say, just put "NORETURN(play_dead)" into tools/objtool/noreturns.h, it works well. But I noticed that play_dead() is only defined once and only called by arch_cpu_idle_dead(), so put the body of play_dead() into the caller arch_cpu_idle_dead(), then remove the noreturn function play_dead() is an alternative way which can reduce the overhead of the function call at the same time. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
8879515e12 |
LoongArch: Add identifier names to arguments of die() declaration
Add identifier names to arguments of die() declaration in ptrace.h to fix the following checkpatch warnings: WARNING: function definition argument 'const char *' should also have an identifier name WARNING: function definition argument 'struct pt_regs *' should also have an identifier name Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
a038ae7148 |
LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
After the call to oops_exit(), it should not panic or execute the crash kernel if the oops is to be suppressed. Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
6933c11fb5 |
LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.
Commit
|
||
Masahiro Yamada
|
a746ceb1f3 |
LoongArch: Remove <asm/export.h>
All *.S files under arch/loongarch/ have been converted to include <linux/export.h> instead of <asm/export.h>. Remove <asm/export.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Masahiro Yamada
|
55b46ff939 |
LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
Commit
|
||
|
Masahiro Yamada
|
347aa8dec2 |
LoongArch: Remove unneeded #include <asm/export.h>
There is no EXPORT_SYMBOL() line there, hence #include <asm/export.h> is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
WANG Xuerui
|
3f301dc292 |
LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
As explained by Nick in the original issue: the kernel usually does a good job of providing library helpers that have similar semantics as their ordinary userspace libc equivalents, but -ffreestanding disables such libcall optimization and other related features in the compiler, which can lead to unexpected things such as CONFIG_FORTIFY_SOURCE not working (!). However, due to the desire for better control over unaligned accesses with respect to CONFIG_ARCH_STRICT_ALIGN, and also for avoiding the GCC bug https://gcc.gnu.org/PR109465, we do want to still disable optimizations for the memory libcalls (memcpy, memmove and memset for now). Use finer-grained -fno-builtin-* toggles to achieve this without losing source fortification and other libcall optimizations. Closes: https://github.com/ClangBuiltLinux/linux/issues/1897 Reported-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Xi Ruoyao
|
b8e2771b7f |
LoongArch: Remove redundant "source drivers/firmware/Kconfig"
In drivers/Kconfig, drivers/firmware/Kconfig is sourced for all ports so there is no need to source it in the port-specific Kconfig file. And sourcing it here also caused the "Firmware Drivers" menu appeared two times: one in the "Device Drivers" menu, another in the toplevel menu. This is really puzzling so remove it. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Matthew Wilcox (Oracle)
|
203b7b6aad |
mm: rationalise flush_icache_pages() and flush_icache_page()
Move the default (no-op) implementation of flush_icache_pages() to <linux/cacheflush.h> from <asm-generic/cacheflush.h>. Remove the flush_icache_page() wrapper from each architecture into <linux/cacheflush.h>. Link: https://lkml.kernel.org/r/20230802151406.3735276-32-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
a6d01af08b |
loongarch: implement the new page table range API
Add update_mmu_cache_range() and change _PFN_SHIFT to PFN_PTE_SHIFT. It would probably be more efficient to implement __update_tlb() by flushing the entire folio instead of calling __update_tlb() N times, but I'll leave that for someone who understands the architecture better. Link: https://lkml.kernel.org/r/20230802151406.3735276-15-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Dave Airlie
|
fdebffeba8 |
Linux 6.5-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTiDvweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7doH/2Poj73npPKPVfT3 RF8AsgvAj2pLby67rdvwTdFX+exS63SsuwtGGRfAHfGabiwmNN+oT2dLb0aY15bp nskHnFpcqQ/pfZ2i2rUCenzBX8S9QULvPidLKRaf1FcSdOzqd97Bw5oDPMtzqy/R Pm+Dzs//7fYvtm69nt6hKW4d6wXxNcg7Fk/QgoJ5Ax9vGvDuZmWXH0ZgBf/5kH04 TTPQNtVX57lf+FHugkhFEn4JbYXvN168b+LuX2PHwOeG/8AIS69Hc0vgvhHNAycT mmpUI1gWA2jfrJ2RCyyezF/6wy9Ocsp+CbPjfwjuRUxOk0XIm1+cp9Mlz/cRbMsZ f0tOTpk= =xrJp -----END PGP SIGNATURE----- BackMerge tag 'v6.5-rc7' into drm-next Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
Vishal Moola (Oracle)
|
382739797f |
loongarch: convert various functions to use ptdescs
As part of the conversions to replace pgtable constructor/destructors with ptdesc equivalents, convert various page table functions to use ptdescs. Some of the functions use the *get*page*() helper functions. Convert these to use pagetable_alloc() and ptdesc_address() instead to help standardize page tables further. Link: https://lkml.kernel.org/r/20230807230513.102486-22-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guo Ren <guoren@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matthew Wilcox <willy@infradead.org> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Douglas Anderson
|
8d539b84f1 |
nmi_backtrace: allow excluding an arbitrary CPU
The APIs that allow backtracing across CPUs have always had a way to exclude the current CPU. This convenience means callers didn't need to find a place to allocate a CPU mask just to handle the common case. Let's extend the API to take a CPU ID to exclude instead of just a boolean. This isn't any more complex for the API to handle and allows the hardlockup detector to exclude a different CPU (the one it already did a trace for) without needing to find space for a CPU mask. Arguably, this new API also encourages safer behavior. Specifically if the caller wants to avoid tracing the current CPU (maybe because they already traced the current CPU) this makes it more obvious to the caller that they need to make sure that the current CPU ID can't change. [akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub] Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eric DeVolder
|
19e6dd0b61 |
loongarch/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common kernel/Kconfig.kexec. Utilize the common options and provide the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the equivalent set of KEXEC and CRASH options. Link: https://lkml.kernel.org/r/20230712161545.87870-7-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Aneesh Kumar K.V
|
0b6f15824c |
mm/vmemmap optimization: split hugetlb and devdax vmemmap optimization
Arm disabled hugetlb vmemmap optimization [1] because hugetlb vmemmap
optimization includes an update of both the permissions (writeable to
read-only) and the output address (pfn) of the vmemmap ptes. That is not
supported without unmapping of pte(marking it invalid) by some
architectures.
With DAX vmemmap optimization we don't require such pte updates and
architectures can enable DAX vmemmap optimization while having hugetlb
vmemmap optimization disabled. Hence split DAX optimization support into
a different config.
s390, loongarch and riscv don't have devdax support. So the DAX config is
not enabled for them. With this change, arm64 should be able to select
DAX optimization
[1] commit
|
||
Baoquan He
|
0b1f77e74b |
asm-generic/iomap.h: remove ARCH_HAS_IOREMAP_xx macros
Patch series "mm: ioremap: Convert architectures to take GENERIC_IOREMAP way", v8. Motivation and implementation: ============================== Currently, many architecutres have't taken the standard GENERIC_IOREMAP way to implement ioremap_prot(), iounmap(), and ioremap_xx(), but make these functions specifically under each arch's folder. Those cause many duplicated code of ioremap() and iounmap(). In this patchset, firstly introduce generic_ioremap_prot() and generic_iounmap() to extract the generic code for GENERIC_IOREMAP. By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(), generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and iounmap() are all visible and available to arch. Arch needs to provide wrapper functions to override the generic version if there's arch specific handling in its corresponding ioremap_prot(), ioremap() or iounmap(). With these changes, duplicated ioremap/iounmap() code uder ARCH-es are removed, and the equivalent functioality is kept as before. Background info: ================ 1) The converting more architectures to take GENERIC_IOREMAP way is suggested by Christoph in below discussion: https://lore.kernel.org/all/Yp7h0Jv6vpgt6xdZ@infradead.org/T/#u 2) In the previous v1 to v3, it's basically further action after arm64 has converted to GENERIC_IOREMAP way in below patchset. It's done by adding hook ioremap_allowed() and iounmap_allowed() in ARCH to add ARCH specific handling the middle of ioremap_prot() and iounmap(). [PATCH v5 0/6] arm64: Cleanup ioremap() and support ioremap_prot() https://lore.kernel.org/all/20220607125027.44946-1-wangkefeng.wang@huawei.com/T/#u Later, during v3 reviewing, Christophe Leroy suggested to introduce generic_ioremap_prot() and generic_iounmap() to generic codes, and ARCH can provide wrapper function ioremap_prot(), ioremap() or iounmap() if needed. Christophe made a RFC patchset as below to specially demonstrate his idea. This is what v4 and now v5 is doing. [RFC PATCH 0/8] mm: ioremap: Convert architectures to take GENERIC_IOREMAP way https://lore.kernel.org/all/cover.1665568707.git.christophe.leroy@csgroup.eu/T/#u Testing: ======== In v8, I only applied this patchset onto the latest linus's tree to build and run on arm64 and s390. This patch (of 19): Let's use '#define ioremap_xx' and "#ifdef ioremap_xx" instead. To remove defined ARCH_HAS_IOREMAP_xx macros in <asm/io.h> of each ARCH, the ARCH's own ioremap_wc|wt|np definition need be above "#include <asm-generic/iomap.h>. Otherwise the redefinition error would be seen during compiling. So the relevant adjustments are made to avoid compiling error: loongarch: - doesn't include <asm-generic/iomap.h>, defining ARCH_HAS_IOREMAP_WC is redundant, so simply remove it. m68k: - selected GENERIC_IOMAP, <asm-generic/iomap.h> has been added in <asm-generic/io.h>, and <asm/kmap.h> is included above <asm-generic/iomap.h>, so simply remove ARCH_HAS_IOREMAP_WT defining. mips: - move "#include <asm-generic/iomap.h>" below ioremap_wc definition in <asm/io.h> powerpc: - remove "#include <asm-generic/iomap.h>" in <asm/io.h> because it's duplicated with the one in <asm-generic/io.h>, let's rely on the latter. x86: - selected GENERIC_IOMAP, remove #include <asm-generic/iomap.h> in the middle of <asm/io.h>. Let's rely on <asm-generic/io.h>. Link: https://lkml.kernel.org/r/20230706154520.11257-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Helge Deller <deller@gmx.de> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Rich Felker <dalias@libc.org> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Greg Kroah-Hartman
|
fe3015748a |
Merge 6.5-rc4 into tty-next
We need the serial/tty fixes in here as well for testing and future development. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Sven Joachim
|
1f2190d6b7 |
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS
Commit
|
||
|
Huacai Chen
|
1e74ae3280 |
LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
In the current configuration, cpu_has_lsx and cpu_has_lasx cannot be constants. So cleanup the __builtin_constant_p() checking to reduce the complexity. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
4eece7e6de |
LoongArch: BPF: Fix check condition to call lu32id in move_imm()
As the code comment says, the initial aim is to reduce one instruction
in some corner cases, if bit[51:31] is all 0 or all 1, no need to call
lu32id. That is to say, it should call lu32id only if bit[51:31] is not
all 0 and not all 1. The current code always call lu32id, the result is
right but the logic is unexpected and wrong, fix it.
Cc: stable@vger.kernel.org # 6.1
Fixes:
|
||
Chenguang Zhao
|
de0e30bee8 |
LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
Currently nettrace does not work on LoongArch due to missing
bpf_probe_read{,str}() support, with the error message:
ERROR: failed to load kprobe-based eBPF
ERROR: failed to load kprobe-based bpf
According to commit
|
||
WANG Rui
|
e66d511fc9 |
LoongArch: Fix return value underflow in exception path
This patch fixes an underflow issue in the return value within the
exception path, specifically at .Llt8 when the remaining length is less
than 8 bytes.
Cc: stable@vger.kernel.org
Fixes:
|
||
Zhihong Dong
|
83da30d73b |
LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
On FDT systems these command line processing are already taken care of by early_init_dt_scan_chosen(). Add similar handling to the ACPI (non- FDT) code path to allow these config options to work for ACPI (non-FDT) systems too. Signed-off-by: Zhihong Dong <donmor3000@hotmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
03c53eb90c |
LoongArch: Fix module relocation error with binutils 2.41
Binutils 2.41 enables linker relaxation by default, but the kernel module loader doesn't support that, so just disable it. Otherwise we get such an error when loading modules: "Unknown relocation type 102" As an alternative, we could add linker relaxation support in the kernel module loader. But it is relatively large complexity that may or may not bring a similar gain, and we don't really want to include this linker pass in the kernel. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
54c2c9df08 |
LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'
This is a port of commit |
||
Jiri Slaby
|
bcb48185ed |
tty: sysrq: switch sysrq handlers from int to u8
The passed parameter to sysrq handlers is a key (a character). So change the type from 'int' to 'u8'. Let it specifically be 'u8' for two reasons: * unsigned: unsigned values come from the upper layers (devices) and the tty layer assumes unsigned on most places, and * 8-bit: as that what's supposed to be one day in all the layers built on the top of tty. (Currently, we use mostly 'unsigned char' and somewhere still only 'char'. (But that also translates to the former thanks to -funsigned-char.)) Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> # DRM Acked-by: WANG Xuerui <git@xen0n.name> # loongarch Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20230712081811.29004-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniel Vetter
|
6c7f27441d |
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
|
||
Rick Edgecombe
|
2f0584f3f4 |
mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma()
The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(), create a new arch config HAS_HUGE_PAGE that can be used to tell if pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the compiler would not be able to find pmd_mkwrite_novma(). No functional change. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/ Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com |
||
Uros Bizjak
|
d6b45484c1 |
locking/arch: Avoid variable shadowing in local_try_cmpxchg()
Several architectures define arch_try_local_cmpxchg macro using
internal temporary variables named ___old, __old or _old. Remove
temporary varible in local_try_cmpxchg to avoid variable shadowing.
No functional change intended.
Fixes:
|
||
Thomas Zimmermann
|
8b0d13545b |
efi: Do not include <linux/screen_info.h> from EFI header
The header file <linux/efi.h> does not need anything from <linux/screen_info.h>. Declare struct screen_info and remove the include statements. Update a number of source files that require struct screen_info's definition. v2: * update loongarch (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-2-tzimmermann@suse.de |
||
|
Linus Torvalds
|
7b82e90411 |
asm-generic updates for 6.5
These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync
and are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type
checking, forcing the use of pointers
-----BEGIN PGP SIGNATURE-----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=S/he
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
||
|
Linus Torvalds
|
cccf0c2ee5 |
Tracing updates for 6.5:
- Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJy6ixQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnzRAPsEI2YgjaJSHnuPoGRHbrNil6pq66wY LYaLizGI4Jv9BwEAqdSdcYcMiWo1SFBAO8QxEDM++BX3zrRyVgW8ahaTNgs= =TF0C -----END PGP SIGNATURE----- Merge tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs" |
||
|
Linus Torvalds
|
112e7e2151 |
LoongArch changes for v6.5
1, Preliminary ClangBuiltLinux enablement; 2, Add support to clone a time namespace; 3, Add vector extensions support; 4, Add SMT (Simultaneous Multi-Threading) support; 5, Support dbar with different hints; 6, Introduce hardware page table walker; 7, Add jump-label implementation; 8, Add rethook and uprobes support; 9, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmSdmI4WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeoeDEACd+KFZnQrX6fwpohuxWgQ46YSk bmKRnVCVg6jg/yL99WTHloaubMbyncgNL7YNvCRmuXcTQdjFP1zFb3q3ZqxTkaOT Kg9EO4R5H8U2Wolz3uqcvTBbPxv6bwDor1gBWzVo8RTO4S7gYt5tLS7pvLiYPWzp Jhgko2AHE/Y02Qqg00ARLIzDDLMm9vR5Gdmpj2jhl8wMHMNaqMW5E0r7XaiFoav0 G1PjIAk+0LIj9QHYUm5e0kcXHh0KzgUMG0LUDawbAanZn2r1KhAk0ouwXX/eu9J7 NQQRDi1Z02pTI5X3V1VAf+0O7RGnGGnWb/r2K76nr7lZNp88RJfbLtgBM01pzw2U NTnIAP7cAomNDaBglzAuS17yeFTS953nxaQlR8/t3UefP+fHmiIJyOOlxrXFMwVM jOfW4JAIkcl5DD/8l9lU1t91+zyKMrjsv8IrlGPW1sLsr/UOQjBajdHwnH8veC41 mL+xjiMb51g33JDRDAl6mloxXms9LvcNzbnKSwqVO1i23GkN1iHJmbq66Teut07C 7AH2qM3tSAuiXmNF1ntvodK1ukLS8moOiP8ZuuHfS13rr7gxPyRAvYdBiDaNEhF2 gCYYpIcaly+5rSf6wvDXgl/s3tS4o07AzDfpttyH5jYnY80nVj7CgS8vUU/mg1lW QpapBnBHU8wrz+eBqQ== =3gt3 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - preliminary ClangBuiltLinux enablement - add support to clone a time namespace - add vector extensions support - add SMT (Simultaneous Multi-Threading) support - support dbar with different hints - introduce hardware page table walker - add jump-label implementation - add rethook and uprobes support - some bug fixes and other small changes * tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits) LoongArch: Remove five DIE_* definitions in kdebug.h LoongArch: Add uprobes support LoongArch: Use larch_insn_gen_break() for kprobes LoongArch: Add larch_insn_gen_break() to generate break insns LoongArch: Check for AMO instructions in insns_not_supported() LoongArch: Move three functions from kprobes.c to inst.c LoongArch: Replace kretprobe with rethook LoongArch: Add jump-label implementation LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak LoongArch: Export some arch-specific pm interfaces LoongArch: Introduce hardware page table walker LoongArch: Support dbar with different hints LoongArch: Add SMT (Simultaneous Multi-Threading) support LoongArch: Add vector extensions support LoongArch: Add support to clone a time namespace Makefile: Add loongarch target flag for Clang compilation LoongArch: Mark Clang LTO as working LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target=' LoongArch: Tweak CFLAGS for Clang compatibility ... |
||
|
Linus Torvalds
|
1b722407a1 |
drm changes for 6.5-rc1:
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
|
Tiezhu Yang
|
5ee35c7696 |
LoongArch: Remove five DIE_* definitions in kdebug.h
For now, DIE_PAGE_FAULT, DIE_BREAK, DIE_SSTEPBP, DIE_UPROBE and DIE_UPROBE_XOL are not used by any code, remove them. Tested-by: Jeff Xie <xiehuan09@gmail.com> Suggested-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
19bc6cb640 |
LoongArch: Add uprobes support
Uprobes is the user-space counterpart to kprobes, this patch adds
uprobes support for LoongArch.
Here is a simple example with CONFIG_UPROBE_EVENTS=y:
# cat test.c
#include <stdio.h>
int add(int a, int b)
{
return a + b;
}
int main()
{
return add(2, 7);
}
# gcc test.c -o /tmp/test
# nm /tmp/test | grep add
0000000120004194 T add
# cd /sys/kernel/debug/tracing
# echo > uprobe_events
# echo "p:myuprobe /tmp/test:0x4194 %r4 %r5" > uprobe_events
# echo "r:myuretprobe /tmp/test:0x4194 %r4" >> uprobe_events
# echo 1 > events/uprobes/enable
# echo 1 > tracing_on
# /tmp/test
# cat trace
...
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
test-1060 [001] DNZff 1015.770620: myuprobe: (0x120004194) arg1=0x2 arg2=0x7
test-1060 [001] DNZff 1015.770930: myuretprobe: (0x1200041f0 <- 0x120004194) arg1=0x9
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Tiezhu Yang
|
6e32036333 |
LoongArch: Use larch_insn_gen_break() for kprobes
For now, we can use larch_insn_gen_break() to define KPROBE_BP_INSN and KPROBE_SSTEPBP_INSN. Because larch_insn_gen_break() returns instruction word, define kprobe_opcode_t as u32, then do some small changes related with type conversion, no functional change intended. Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
49ed320da5 |
LoongArch: Add larch_insn_gen_break() to generate break insns
There exist various break insns such as BRK_KPROBE_BP, BRK_KPROBE_SSTEPBP, BRK_UPROBE_BP and BRK_UPROBE_XOLBP, add larch_insn_gen_break() to generate break insns simpler, this is preparation for later patch. Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
b82fad4d5d |
LoongArch: Check for AMO instructions in insns_not_supported()
Like llsc instructions, the atomic memory access instructions shouldn't be supported for probing, so check for them in insns_not_supported(). Closes: https://lore.kernel.org/all/SY4P282MB351877A70A0333C790FE85A5C09C9@SY4P282MB3518.AUSP282.PROD.OUTLOOK.COM/ Tested-by: Jeff Xie <xiehuan09@gmail.com> Reported-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
3d2c3daf82 |
LoongArch: Move three functions from kprobes.c to inst.c
The three functions insns_not_supported(), insns_need_simulation() and arch_simulate_insn() will be used for uprobes, move them from kprobes.c to inst.c, this is preparation for later patch, no functionality change. Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Haoran Jiang
|
7b0a096436 |
LoongArch: Replace kretprobe with rethook
This is an adaptation of commit |
||
Youling Tang
|
f02644e32c |
LoongArch: Add jump-label implementation
Add support for jump labels based on the ARM64 version. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
5d55377040 |
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
We can see that DEBUG_KMEMLEAK depends on HAVE_DEBUG_KMEMLEAK after
commit
|
||
Yinbo Zhu
|
31f1a8b0ec |
LoongArch: Export some arch-specific pm interfaces
Some PMC (Power Management Controllers) need to support DTS and will use the suspend interfaces thus this patch was to export such interfaces for their use. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
01158487af |
LoongArch: Introduce hardware page table walker
Loongson-3A6000 and newer processors have hardware page table walker (PTW) support. PTW can handle all fastpaths of TLBI/TLBL/TLBS/TLBM exceptions by hardware, software only need to handle slowpaths (page faults). BTW, PTW doesn't append _PAGE_MODIFIED for page table entries, so we change pmd_dirty() and pte_dirty() to also check _PAGE_DIRTY for the "dirty" attribute. Signed-off-by: Liang Gao <gaoliang@loongson.cn> Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
e031a5f3f1 |
LoongArch: Support dbar with different hints
Traditionally, LoongArch uses "dbar 0" (full completion barrier) for
everything. But the full completion barrier is a performance killer, so
Loongson-3A6000 and newer processors have made finer granularity hints
available:
Bit4: ordering or completion (0: completion, 1: ordering)
Bit3: barrier for previous read (0: true, 1: false)
Bit2: barrier for previous write (0: true, 1: false)
Bit1: barrier for succeeding read (0: true, 1: false)
Bit0: barrier for succeeding write (0: true, 1: false)
Hint 0x700: barrier for "read after read" from the same address, which
is needed by LL-SC loops on old models (dbar 0x700 behaves the same as
nop if such reordering is disabled on new models).
This patch makes use of the various new hints for different kinds of
memory barriers. It brings performance improvements on Loongson-3A6000
series, while not affecting the existing models because all variants are
treated as 'dbar 0' there.
Why override queued_spin_unlock()?
After commit
|
||
|
Huacai Chen
|
f6f0c9a74a |
LoongArch: Add SMT (Simultaneous Multi-Threading) support
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each physical core has two logical cores (threads). This patch add SMT probe and scheduler support via ACPI PPTT. If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads; If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads. Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing). Signed-off-by: Liupu Wang <wangliupu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
616500232e |
LoongArch: Add vector extensions support
Add LoongArch's vector extensions support, which including 128bit LSX (i.e., Loongson SIMD eXtension) and 256bit LASX (i.e., Loongson Advanced SIMD eXtension). Linux kernel doesn't use vector itself, it only handle exceptions and context save/restore. So it only needs a subset of these instructions: * Vector load/store: vld vst vldx vstx xvld xvst xvldx xvstx * 8bit-elements move: vpickve2gr.b xvpickve2gr.b vinsgr2vr.b xvinsgr2vr.b * 16bit-elements move: vpickve2gr.h xvpickve2gr.h vinsgr2vr.h xvinsgr2vr.h * 32bit-elements move: vpickve2gr.w xvpickve2gr.w vinsgr2vr.w xvinsgr2vr.w * 64bit-elements move: vpickve2gr.d xvpickve2gr.d vinsgr2vr.d xvinsgr2vr.d * Elements permute: vpermi.w vpermi.d xvpermi.w xvpermi.d xvpermi.q Introduce AS_HAS_LSX_EXTENSION and AS_HAS_LASX_EXTENSION to avoid non- vector toolchains complains unsupported instructions. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
aa5e65dc08 |
LoongArch: Add support to clone a time namespace
We can see that "Time namespaces are not supported" on LoongArch: (1) clone3 test # cd tools/testing/selftests/clone3 && make && ./clone3 ... # Time namespaces are not supported ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0 (2) timens test # cd tools/testing/selftests/timens && make && ./timens ... 1..0 # SKIP Time namespaces are not supported On LoongArch the current kernel does not support CONFIG_TIME_NS which depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable CONFIG_TIME_NS to build kernel/time/namespace.c. Additionally, it needs to define some arch-dependent functions for the timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and vdso_join_timens(). At the same time, modify the layout of vvar to use one page size for generic vdso data, expand another page size for timens vdso data and assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in the future) for loongarch vdso data, at last add the callback function vvar_fault() and modify stack_top(). With this patch under CONFIG_TIME_NS: (1) clone3 test # cd tools/testing/selftests/clone3 && make && ./clone3 ... ok 18 [739] Result (0) matches expectation (0) # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0 (2) timens test # cd tools/testing/selftests/timens && make && ./timens ... # Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
5a31ed4678 |
LoongArch: Mark Clang LTO as working
Confirmed working with QEMU system emulation. Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
5ddc7a3794 |
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
This is a port of commit
|
||
|
WANG Xuerui
|
b89673a91a |
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
This is a port of commit
|
||
|
WANG Xuerui
|
38b10b269d |
LoongArch: Tweak CFLAGS for Clang compatibility
Now the arch code is mostly ready for LLVM/Clang consumption, it is time to re-organize the CFLAGS a little to actually enable the LLVM build. Namely, all -G0 switches from CFLAGS are removed, and -mexplicit-relocs and -mdirect-extern-access are now wrapped with cc-option (with the related asm/percpu.h definition guarded against toolchain combos that are known to not work). A build with !RELOCATABLE && !MODULE is confirmed working within a QEMU environment; support for the two features are currently blocked on LLVM/Clang, and will come later. Why -G0 can be removed: In GCC, -G stands for "small data threshold", that instructs the compiler to put data smaller than the specified threshold in a dedicated "small data" section (called .sdata on LoongArch and several other arches). However, benefiting from this would require ABI cooperation, which is not the case for LoongArch; and current GCC behave the same whether -G0 (equal to disabling this optimization) is given or not. So, remove -G0 from CFLAGS altogether for one less thing to care about. This also benefits LLVM/Clang compatibility where the -G switch is not supported. Why -mexplicit-relocs can now be conditionally applied without regressions: Originally -mexplicit-relocs is unconditionally added to CFLAGS in case of CONFIG_AS_HAS_EXPLICIT_RELOCS, because not having it (i.e. old GCC + new binutils) would not work: modules will have R_LARCH_ABS_* relocs inside, but given the rarity of such toolchain combo in the wild, it may not be worthwhile to support it, so support for such relocs in modules were not added back when explicit relocs support was upstreamed, and -mexplicit-relocs is unconditionally added to fail the build early. Now that Clang compatibility is desired, given Clang is behaving like -mexplicit-relocs from day one but without support for the CLI flag, we must ensure the flag is not passed in case of Clang. However, explicit compiler flavor checks can be more brittle than feature detection: in this case what actually matters is support for __attribute__((model)) when building modules. Given neither older GCC nor current Clang support this attribute, probing for the attribute support and #error'ing out would allow proper UX without checking for Clang, and also automatically work when Clang support for the attribute is to be added in the future. Why -mdirect-extern-access is now conditionally applied: This is actually a nice-to-have optimization that can reduce GOT accesses, but not having it is harmless either. Because Clang does not support the option currently, but might do so in the future, conditional application via cc-option ensures compatibility with both current and future Clang versions. Suggested-by: Xi Ruoyao <xry111@xry111.site> # cc-option changes Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
83d8b38967 |
LoongArch: Simplify the invtlb wrappers
The invtlb instruction has been supported by upstream LoongArch toolchains from day one, so ditch the raw opcode trickery and just use plain inline asm for it. While at it, also make the invtlb asm statements barriers, for proper modeling of the side effects. The functions are also marked as __always_inline instead of just "inline", because they cannot work at all if not inlined: the op argument will not be compile-time const in that case, thus failing to satisfy the "i" constraint. The signature of the other more specific invtlb wrappers contain unused arguments right now, but these are not removed right away in order for the patch to be focused. In the meantime, assertions are added to ensure no accidental misuse happens before the refactor. (The more specific wrappers cannot re-use the generic invtlb wrapper, because the ISA manual says $zero shall be used in case a particular op does not take the respective argument: re-using the generic wrapper would mean losing control over the register usage.) Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
53a4858ccd |
LoongArch: Make the CPUCFG&CSR ops simple aliases of compiler built-ins
In addition to less visual clutter, this also makes Clang happy regarding the const-ness of arguments. In the original approach, all Clang gets to see is the incoming arguments whose const-ness cannot be proven without first being inlined; so Clang errors out here while GCC is fine. While at it, tweak several printk format strings because the return type of csr_read64 becomes effectively unsigned long, instead of unsigned long long. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
38bb46f945 |
LoongArch: Prepare for assemblers with proper FCSR class support
The GNU assembler (as of 2.40) mis-treats FCSR operands as GPRs, but the LLVM IAS does not. Probe for this and refer to FCSRs as "$fcsrNN" if support is present. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Rui
|
24da0249d9 |
LoongArch: extable: Also recognize ABI names of registers
When the kernel is compiled with LLVM, the register names being handled during exception fixup building are ABI names instead of bare $rNN style. Add mapping for the ABI names for LLVM compatibility. Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Rui
|
414cefc798 |
LoongArch: Calculate various sizes in the linker script
Taking the address delta between symbols in different sections is not supported by the LLVM IAS. Instead, do this in the linker script, so the same data can be properly referenced in assembly. Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> [chenhuacai: Fix build with !CONFIG_EFI_STUB] Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Rui
|
0d03e9dce5 |
LoongArch: Add guard for the larch_insn_gen_xxx functions
Add guard for the larch_insn_gen_xxx functions to verify whether the immediate operand is within the acceptable range. Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Dan Carpenter
|
d7c2496097 |
LoongArch: Delete unnecessary debugfs checking
Debugfs functions are not supposed to be checked for errors. This is sort of unusual but it is described in the comments for the debugfs_create_dir() function. Also debugfs_create_dir() can never return NULL. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
872b368b22 |
LoongArch: Set CPU#0 as the io master for FDT
ACPI systems set io masters by parsing ACPI MADT, FDT systems have no MADT so we explicitly set CPU#0 as the io master. Otherwise CPU#0 will be considered as hotpluggable. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
9471f1f2f5 |
Merge branch 'expand-stack'
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
||
|
Linus Torvalds
|
bc6cb4d5bc |
Locking changes for v6.5:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
|
Linus Torvalds
|
ed3b7923a8 |
Scheduler changes for v6.5:
- Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of higher-frequency
SMT cores and lower-frequency non-SMT cores), under the old code
lower-priority CPUs pulled tasks from the higher-priority cores if
more than one SMT sibling was busy - resulting in many unnecessary
task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores with more
than one busy sibling and allows lower-priority CPUs to pull tasks, which
avoids superfluous migrations and lets lower-priority cores inspect all SMT
siblings for the busiest queue.
- Implement the 'runnable boosting' feature in the EAS balancer: consider CPU
contention in frequency, EAS max util & load-balance busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves other key
workloads unchanged.
- Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it
into the build_sched_topology() helper function and building
it dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
- Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations.
- Fix task_struct::saved_state handling.
- Fix various rq clock update bugs, unearthed by turning on the rq clock
debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger by
creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
- Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation
to (maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EWQA
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
|
||
|
Linus Torvalds
|
7cffdbe360 |
Updates for the x86 boot process:
- Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes it
clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup.
-----BEGIN PGP SIGNATURE-----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=yxMj
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
|
||
|
Linus Torvalds
|
a050ba1e74 |
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
This does the simple pattern conversion of alpha, arc, csky, hexagon, loongarch, nios2, sh, sparc32, and xtensa to the lock_mm_and_find_vma() helper. They all have the regular fault handling pattern without odd special cases. The remaining architectures all have something that keeps us from a straightforward conversion: ia64 and parisc have stacks that can grow both up as well as down (and ia64 has special address region checks). And m68k, microblaze, openrisc, sparc64, and um end up having extra rules about only expanding the stack down a limited amount below the user space stack pointer. That is something that x86 used to do too (long long ago), and it probably could just be skipped, but it still makes the conversion less than trivial. Note that this conversion was done manually and with the exception of alpha without any build testing, because I have a fairly limited cross- building environment. The cases are all simple, and I went through the changes several times, but... Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tiezhu Yang
|
8386f58f8d |
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
Now we specify the minimal version of GCC as 5.1 and Clang/LLVM as 11.0.0 in Documentation/process/changes.rst, __CHAR_BIT__ and __SIZEOF_LONG__ are usable, it is probably fine to unify the definition of __BITS_PER_LONG as (__CHAR_BIT__ * __SIZEOF_LONG__) in asm-generic uapi bitsperlong.h. In order to keep safe and avoid regression, only unify uapi bitsperlong.h for some archs such as arm64, riscv and loongarch which are using newer toolchains that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__. Suggested-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/all/d3e255e4746de44c9903c4433616d44ffcf18d1b.camel@xry111.site/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-arch/a3a4f48a-07d4-4ed9-bc53-5d383428bdd2@app.fastmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Donglin Peng
|
5779e3c0f5 |
LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
The previous patch ("function_graph: Support recording and printing
the return value of function") has laid the groundwork for the for
the funcgraph-retval, and this modification makes it available on
the LoongArch platform.
We introduce a new structure called fgraph_ret_regs for the LoongArch
platform to hold return registers and the frame pointer. We then fill
its content in the return_to_handler and pass its address to the
function ftrace_return_to_handler to record the return value.
Link: https://lkml.kernel.org/r/c5462255e435fab363895c2d7433bc0f5a140411.1680954589.git.pengdonglin@sangfor.com.cn
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Dave Airlie
|
cce3b573a5 |
Linux 6.4-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1 x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2 BnM2IZI= =ANT5 -----END PGP SIGNATURE----- Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 6.4-rc7 Need this to pull in the msm work. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
Thomas Gleixner
|
9841c42316 |
loongarch/cpu: Switch to arch_cpu_finalize_init()
check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.195288218@linutronix.de |
||
Immad Mir
|
41efbb682d |
LoongArch: Fix debugfs_create_dir() error checking
The debugfs_create_dir() returns ERR_PTR in case of an error and the correct way of checking it is using the IS_ERR_OR_NULL inline function rather than the simple null comparision. This patch fixes the issue. Cc: stable@vger.kernel.org Suggested-By: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Immad Mir <mirimmad17@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Qing Zhang
|
0246d0aaf0 |
LoongArch: Avoid uninitialized alignment_mask
The hardware monitoring points for instruction fetching and load/store operations need to align 4 bytes and 1/2/4/8 bytes respectively. Reported-by: Colin King <colin.i.king@gmail.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
962369120d |
LoongArch: Fix perf event id calculation
LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it. Cc: stable@vger.kernel.org Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Qi Hu
|
346dc92962 |
LoongArch: Fix the write_fcsr() macro
The "write_fcsr()" macro uses wrong the positions for val and dest in asm. Fix it! Reported-by: Miao HAO <haomiao19@mails.ucas.ac.cn> Signed-off-by: Qi Hu <huqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Hongchen Zhang
|
ddc1729b07 |
LoongArch: Let pmd_present() return true when splitting pmd
When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should
return true, otherwise it would be treated as a swap pmd.
This is the same as arm64 does in commit
|
||
Peter Zijlstra
|
6b10fef09f |
loongarch: Provide noinstr sched_clock_read()
With the intent to provide local_clock_noinstr(), a variant of local_clock() that's safe to be called from noinstr code (with the assumption that any such code will already be non-preemptible), prepare for things by providing a noinstr sched_clock_read() function. Specifically, preempt_enable_*() calls out to schedule(), which upsets noinstr validation efforts. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V Link: https://lore.kernel.org/r/20230519102715.502547082@infradead.org |
||
Mark Rutland
|
ef558b4b7b |
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
Currently several architectures have kerneldoc comments for arch_atomic_*(), which is unhelpful as these live in a shared namespace where they clash, and the arch_atomic_*() ops are now an implementation detail of the raw_atomic_*() ops, which no-one should use those directly. Delete the kerneldoc comments for arch_atomic_*(), along with pseudo-kerneldoc comments which are in the correct style but are missing the leading '/**' necessary to be true kerneldoc comments. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230605070124.3741859-28-mark.rutland@arm.com |
||
|
Mark Rutland
|
d12157efc8 |
locking/atomic: make atomic*_{cmp,}xchg optional
Most architectures define the atomic/atomic64 xchg and cmpxchg operations in terms of arch_xchg and arch_cmpxchg respectfully. Add fallbacks for these cases and remove the trivial cases from arch code. On some architectures the existing definitions are kept as these are used to build other arch_atomic*() operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230605070124.3741859-5-mark.rutland@arm.com |
||
|
Thomas Zimmermann
|
20d54e48d9 |
fbdev: Rename fb_mem*() helpers
Update the names of the fb_mem*() helpers to be consistent with their regular counterparts. Hence, fb_memset() now becomes fb_memset_io(), fb_memcpy_fromfb() now becomes fb_memcpy_fromio() and fb_memcpy_tofb() becomes fb_memcpy_toio(). No functional changes. v6: * update new file fb_io_fops.c Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-8-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
8f8eaa1b02 |
fbdev: Move framebuffer I/O helpers into <asm/fb.h>
Implement framebuffer I/O helpers, such as fb_read*() and fb_write*(), in the architecture's <asm/fb.h> header file or the generic one. The common case has been the use of regular I/O functions, such as __raw_readb() or memset_io(). A few architectures used plain system- memory reads and writes. Sparc used helpers for its SBus. The architectures that used special cases provide the same code in their __raw_*() I/O helpers. So the patch replaces this code with the __raw_*() functions and moves it to <asm-generic/fb.h> for all architectures. v8: * remove garbage after commit-message tags v6: * fix fb_readq()/fb_writeq() on 64-bit mips (kernel test robot) v5: * include <linux/io.h> in <asm-generic/fb>; fix s390 build v4: * ia64, loongarch, sparc64: add fb_mem*() to arch headers to keep current semantics (Arnd) v3: * implement all architectures with generic helpers * support reordering and native byte order (Geert, Arnd) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-7-tzimmermann@suse.de |
||
Maxime Ripard
|
ff32fcca64
|
Merge drm/drm-next into drm-misc-next
Start the 6.5 release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
||
|
Linus Torvalds
|
b115d85a95 |
Locking changes in v6.4:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code.
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation.
- Misc cleanups/fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mM0A
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
|
||
|
Linus Torvalds
|
611c9d8830 |
LoongArch changes for v6.4
1, Better backtraces for humanization; 2, Relay BCE exceptions to userland as SIGSEGV; 3, Provide kernel fpu functions; 4, Optimize memory ops (memset/memcpy/memmove); 5, Optimize checksum and crc32(c) calculation; 6, Add ARCH_HAS_FORTIFY_SOURCE selection; 7, Add function error injection support; 8, Add ftrace with direct call support; 9, Add basic perf tools support. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2 V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3 mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ 5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK oKYjO+exPyuQ9nSOBg== =3aTV -----END PGP SIGNATURE----- Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Better backtraces for humanization - Relay BCE exceptions to userland as SIGSEGV - Provide kernel fpu functions - Optimize memory ops (memset/memcpy/memmove) - Optimize checksum and crc32(c) calculation - Add ARCH_HAS_FORTIFY_SOURCE selection - Add function error injection support - Add ftrace with direct call support - Add basic perf tools support * tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) tools/perf: Add basic support for LoongArch LoongArch: ftrace: Add direct call trampoline samples support LoongArch: ftrace: Add direct call support LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses LoongArch: Add support for function error injection LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection LoongArch: crypto: Add crc32 and crc32c hw acceleration LoongArch: Add checksum optimization for 64-bit system LoongArch: Optimize memory ops (memset/memcpy/memmove) LoongArch: Provide kernel fpu functions LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs() LoongArch: Humanize the ESTAT line when showing registers LoongArch: Humanize the ECFG line when showing registers LoongArch: Humanize the EUEN line when showing registers LoongArch: Humanize the PRMD line when showing registers LoongArch: Humanize the CRMD line when showing registers LoongArch: Fix format of CSR lines during show_regs() ... |
||
|
Youling Tang
|
22f367a689 |
LoongArch: ftrace: Add direct call trampoline samples support
The ftrace samples need per-architecture trampoline implementations to save and restore argument registers around the calls to my_direct_func* and to restore polluted registers (e.g: ra). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
9cdc3b6a29 |
LoongArch: ftrace: Add direct call support
Select the HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
register_ftrace_direct[_multi] interfaces allowing users to register
the customed trampoline (direct_caller) as the mcount for one or more
target functions. And modify_ftrace_direct[_multi] are also provided
for modifying direct_caller.
There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function AND the direct
called trampoline is within the reach of a 'bl' instruction
-> the ftrace patchsite jumps to the trampoline
- Else
-> the ftrace patchsite jumps to the ftrace_regs_caller trampoline points
to ftrace_list_ops so it iterates over all registered ftrace ops,
including the direct call ops and calls its call_direct_funcs handler
which stores the direct called trampoline's address in the ftrace_regs
and the ftrace_regs_caller trampoline will return to that address
instead of returning to the traced function
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Youling Tang
|
24d4f52791 |
LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
In the module processing functions, the same logic can be reused by implementing ftrace_find_callable_addr(). Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
819cf65575 |
LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
We can see the following build error if CONFIG_DYNAMIC_FTRACE_WITH_REGS
is not set on LoongArch:
arch/loongarch/kernel/ftrace_dyn.c: In function ‘ftrace_make_call’:
arch/loongarch/kernel/ftrace_dyn.c:167:23: error: implicit declaration of function ‘__get_mod’
167 | ret = __get_mod(&mod, pc);
| ^~~~~~~~~
arch/loongarch/kernel/ftrace_dyn.c:171:24: error: implicit declaration of function ‘get_plt_addr’
171 | addr = get_plt_addr(mod, addr);
| ^~~~~~~~~~~~
The reason is that the __get_mod() and get_plt_addr() may be called in
ftrace_make_{call,nop}.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Qing Zhang
|
6fbff14a63 |
LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
Add new ftrace_regs_{get,set}_*() helpers which can be used to manipulate
ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y, these can always
be used on any ftrace_regs, and when CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
=n these can be used when regs are available.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Tiezhu Yang
|
8b5ee2c66d |
LoongArch: Add support for function error injection
Inspired by the commit |
||
|
Qing Zhang
|
d4c937c2a5 |
LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
FORTIFY_SOURCE could detect various overflows at compile and run time.
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and run
with CONFIG_FORTIFY_SOURCE. So select it in LoongArch.
See more about this feature from commit
|
||
Min Zhou
|
2f16482202 |
LoongArch: crypto: Add crc32 and crc32c hw acceleration
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.
LoongArch has provided these instructions to calculate crc32 and crc32c:
* crc.w.b.w crcc.w.b.w
* crc.w.h.w crcc.w.h.w
* crc.w.w.w crcc.w.w.w
* crc.w.d.w crcc.w.d.w
So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.
As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.
Software implemention Hardware acceleration
Buffer size time cost (seconds) time cost (seconds) Accel.
100 KB 0.000845 0.000534 59.1%
1 MB 0.007758 0.004836 59.4%
10 MB 0.076593 0.047682 59.4%
100 MB 0.756734 0.479126 58.5%
1000 MB 7.563841 4.778266 58.5%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
Bibo Mao
|
69e3a6aa6b |
LoongArch: Add checksum optimization for 64-bit system
LoongArch platform is 64-bit system, which supports 8-bytes memory accessing, but generic checksum functions use 4-byte memory access. So add 8-bytes memory access optimization for checksum functions on LoongArch. And the code comes from arm64 system. When network hw checksum is disabled, iperf performance improves about 10% with this patch. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Rui
|
8941e93ca5 |
LoongArch: Optimize memory ops (memset/memcpy/memmove)
To optimize memset()/memcpy()/memmove() and so on, we use a jump table to dispatch cases for short data lengths; and for long data lengths, we split the destination into head part (first 8 bytes), tail part (last 8 bytes) and middle part. The head part and tail part may be at unaligned addresses, while the middle part is always aligned (the middle part is allowed to overlap the head/tail part). In this way, the first and last 8 bytes may be unaligned accesses, but we can make sure the data in the middle is processed at an aligned destination address. We have tested micro-bench[1] on a Loongson-3C5000 16-core machine (2.2GHz): 1. memset | length | src offset | dst offset | speed before | speed after | % | |--------|------------|------------|--------------|-------------|---------| | 8 | 0 | 0 | 696.191 | 1518.785 | 118.16% | | 8 | 0 | 1 | 696.325 | 1518.937 | 118.14% | | 50 | 0 | 0 | 969.976 | 8053.902 | 730.32% | | 50 | 0 | 1 | 970.034 | 8058.475 | 730.74% | | 300 | 0 | 0 | 5876.612 | 16544.703 | 181.53% | | 300 | 0 | 1 | 5030.849 | 16549.011 | 228.95% | | 1200 | 0 | 0 | 11797.077 | 16752.137 | 42.00% | | 1200 | 0 | 1 | 5687.141 | 16645.233 | 192.68% | | 4000 | 0 | 0 | 15723.27 | 16761.557 | 6.60% | | 4000 | 0 | 1 | 5906.114 | 16732.316 | 183.30% | | 8000 | 0 | 0 | 16751.403 | 16770.002 | 0.11% | | 8000 | 0 | 1 | 5995.449 | 16754.07 | 179.45% | 2. memcpy | length | src offset | dst offset | speed before | speed after | % | |--------|------------|------------|--------------|-------------|---------| | 8 | 0 | 0 | 696.2 | 1670.605 | 139.96% | | 8 | 0 | 1 | 696.325 | 1671.138 | 139.99% | | 50 | 0 | 0 | 969.974 | 8724.999 | 799.51% | | 50 | 0 | 1 | 970.032 | 8730.138 | 799.98% | | 300 | 0 | 0 | 5564.662 | 16272.652 | 192.43% | | 300 | 0 | 1 | 4670.436 | 14972.842 | 220.59% | | 1200 | 0 | 0 | 10740.23 | 16751.728 | 55.97% | | 1200 | 0 | 1 | 5027.741 | 14874.564 | 195.85% | | 4000 | 0 | 0 | 15122.367 | 16737.642 | 10.68% | | 4000 | 0 | 1 | 5536.918 | 14890.397 | 168.93% | | 8000 | 0 | 0 | 16505.453 | 16553.543 | 0.29% | | 8000 | 0 | 1 | 5821.619 | 14841.804 | 154.94% | 3. memmove | length | src offset | dst offset | speed before | speed after | % | |--------|------------|------------|--------------|-------------|---------| | 8 | 0 | 0 | 982.693 | 1670.568 | 70.00% | | 8 | 0 | 1 | 983.023 | 1671.174 | 70.00% | | 50 | 0 | 0 | 1230.87 | 8727.625 | 609.06% | | 50 | 0 | 1 | 1232.515 | 8730.138 | 608.32% | | 300 | 0 | 0 | 6490.375 | 16296.993 | 151.09% | | 300 | 0 | 1 | 4282.687 | 14972.842 | 249.61% | | 1200 | 0 | 0 | 11742.755 | 16752.546 | 42.66% | | 1200 | 0 | 1 | 5039.338 | 14872.951 | 195.14% | | 4000 | 0 | 0 | 15467.786 | 16737.09 | 8.21% | | 4000 | 0 | 1 | 5009.905 | 14890.542 | 197.22% | | 8000 | 0 | 0 | 16489.664 | 16553.273 | 0.39% | | 8000 | 0 | 1 | 5823.786 | 14858.646 | 155.14% | * speed: MB/s * length: byte [1] https://github.com/heiher/mem-bench Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
2b3bd32ea3 |
LoongArch: Provide kernel fpu functions
Provide kernel_fpu_begin()/kernel_fpu_end() to allow the kernel itself to use fpu. They can be used by some other kernel components, e.g., the AMDGPU graphic driver for DCN. Reported-by: WANG Xuerui <kernel@xen0n.name> Tested-by: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
c23e7f01cf |
LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.
Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.
Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:
> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
> ra: 00007ffff2d854fc
> ERA: 00005555558206a4
> CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> PRMD: 00000007 (PPLV3 +PIE -PWE)
> EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
> PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
WANG Xuerui
|
325a38b511 |
LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
Use ISA manual names for BADV and CPUCFG.PRID lines in show_regs(), for stylistic consistency with the other lines already touched. While at it, also include current CPU's full name in show_regs() output. It may be more helpful for developers looking at the resulting dumps, because multiple distinct CPU models may share the same PRID. Not having this info available may hide problems only found on some but not all of the models sharing one specific PRID. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
98b90ede59 |
LoongArch: Humanize the ESTAT line when showing registers
Example output looks like: [ xx.xxxxxx] ESTAT: 00001000 [INT] (IS=12 ECode=0 EsubCode=0) Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
5e3e784d35 |
LoongArch: Humanize the ECFG line when showing registers
Example output looks like: [ xx.xxxxxx] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
9718d96c03 |
LoongArch: Humanize the EUEN line when showing registers
Example output looks like: [ xx.xxxxxx] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
ce7f0b18b0 |
LoongArch: Humanize the PRMD line when showing registers
Example output looks like: [ xx.xxxxxx] PRMD: 00000004 (PPLV0 +PIE -PWE) Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
efada2afac |
LoongArch: Humanize the CRMD line when showing registers
Example output looks like: [ xx.xxxxxx] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) Some initial machinery for this pretty-printing format has been included in this patch as well. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
05fa8d4977 |
LoongArch: Fix format of CSR lines during show_regs()
Use uppercase CSR names throughout for consistency with the manual wording, and right-align the keys. The "CSR" part is inferrable from context, hence dropped for more horizontal space. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
863b3795ef |
LoongArch: Print symbol info for $ra and CSR.ERA only for kernel-mode contexts
Otherwise the addresses wouldn't make sense at all. While at it, align the "map keys" to maintain right-alignment with the "estat:" line too; also swap the ERA and ra lines so all CSRs are shown together. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
f6a79b6036 |
LoongArch: Print GPRs with ABI names when showing registers
Show PC (CSR.ERA) in place of $zero, and also show the syscall restart flag (conveniently stuffed in regs[0]) if non-zero. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
aa552254cf |
LoongArch: Define regular names for BCE/WATCH/HVC/GSPR exceptions
Define them according to the ISA manual, in order to enable matching the sub-exceptions for humanization purposes later. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
WANG Xuerui
|
9e36fa4299 |
LoongArch: Clean up the architectural interrupt definitions
While interrupts are assigned ECodes `64 + interrupt number`, all existing use sites of interrupt numbers want the 64 subtracted. Re-arrange the definitions so that the actual interrupt number is used everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive that way. While at it, according to the asm/loongarch.h definitions, the total number of architectural interrupts should be 14, but various other places indicate otherwise (13 or 15). Those places have been adjusted to 14 as well for consistency. Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Uros Bizjak
|
d994f2c8e2 |
locking/arch: Wire up local_try_cmpxchg()
Implement target specific support for local_try_cmpxchg() and local_cmpxchg() using typed C wrappers that call their _local counterpart and provide additional checking of their input arguments. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230405141710.3551-4-ubizjak@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrzej Hajda
|
068550631f |
locking/arch: Rename all internal __xchg() names to __arch_xchg()
Decrease the probability of this internal facility to be used by driver code. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv] Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com Cc: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
f20730efbd |
SMP cross-CPU function-call updates for v6.4:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
||
|
Linus Torvalds
|
2aff7c706c |
Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Linus Torvalds
|
53b5e72b9d |
asm-generic updates for 6.4
These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRG8IkACgkQYKtH/8kJ Uid15Q/9E/neIIEqEk6IvtyhUicrJiIZUM0rGoYtWXiz75ggk6Kx9+3I+j8zIQ/E kf2TzAG7q9Md7nfTDFLr4FSr0IcNDj+VG4nYxUyDHdKGcARO+g9Kpdvscxip3lgU Rw5w74Gyd30u4iUKGS39OYuxcCgl9LaFjMA9Gh402Oiaoh+OYLmgQS9h/goUD5KN Nd+AoFvkdbnHl0/SpxthLRyL5rFEATBmAY7apYViPyMvfjS3gfDJwXJR9jkKgi6X Qs4t8Op8BA3h84dCuo6VcFqgAJs2Wiq3nyTSUnkF8NxJ2RFTpeiVgfsLOzXHeDgz SKDB4Lp14o3mlyZyj00MWq1uMJRRetUgNiVb6iHOoKQ/E4demBdh+mhIFRybjM5B XNTWFcg9PWFCMa4W9jnLfZBc881X4+7T+qUF8I0W/1AbRJUmyGj8HO6jLceC4yGD UYLn5oFPM6OWXHp6DqJrCr9Yw8h6fuviQZFEbl/ARlgVGt+J4KbYweJYk8DzfX6t PZIj8LskOqyIpRuC2oDA1PHxkaJ1/z+N5oRBHq1uicSh4fxY5HW7HnyzgF08+R3k cf+fjAhC3TfGusHkBwQKQJvpxrxZjPuvYXDZ0GxTvNKJRB8eMeiTm1n41E5oTVwQ swSblSCjZj/fMVVPXLcjxEW4SBNWRxa9Lz3tIPXb3RheU10Lfy8= =H3k4 -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c |
||
|
Linus Torvalds
|
e7989789c6 |
Timers and timekeeping updates:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
||
Jakub Kicinski
|
681c5b51dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Adjacent changes: net/mptcp/protocol.h |
||
|
Thomas Zimmermann
|
84998fc1c3 |
arch/loongarch: Implement <asm/fb.h> with generic helpers
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-7-tzimmermann@suse.de |
||
Enze Li
|
213ef669d1 |
LoongArch: Replace hard-coded values in comments with VALEN
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are concerned with the VA's MSB which is VALEN-1 instead of always being 47. Fix comments to avoid misleading others. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Enze Li <lienze@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
afca6e0649 |
LoongArch: Clean up plat_swiotlb_setup() related code
After commit
|
||
|
Tiezhu Yang
|
370a3b8f58 |
LoongArch: Check unwind_error() in arch_stack_walk()
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Qing Zhang
|
e32b3b8222 |
LoongArch: Adjust user_regset_copyin parameter to the correct offset
Ensure that user_watch_state can be set correctly by the user. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
ff9f3d7aef |
LoongArch: Adjust user_watch_state for explicit alignment
This is done in order to easily calculate the number of breakpoints in hw_break_get()/hw_break_set(). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Aneesh Kumar K.V
|
0b376f1e0f |
mm/hugetlb_vmemmap: rename ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
Now we use ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP config option to indicate devdax and hugetlb vmemmap optimization support. Hence rename that to a generic ARCH_WANT_OPTIMIZE_VMEMMAP Link: https://lkml.kernel.org/r/20230412050025.84346-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Tarun Sahu <tsahu@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huacai Chen
|
93eb1215ed |
LoongArch: module: set section addresses to 0x0
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit
|
||
|
Huacai Chen
|
dce5ea1d0f |
LoongArch: Mark 3 symbol exports as non-GPL
vm_map_base, empty_zero_page and invalid_pmd_table could be accessed widely by some out-of-tree non-GPL but important file systems or drivers (e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL() to export them, so as to avoid build errors. 1, Details about vm_map_base: This is a LoongArch-specific symbol and may be referenced through macros PCI_IOBASE, VMALLOC_START and VMALLOC_END. 2, Details about empty_zero_page: As it stands today, only 3 architectures export empty_zero_page as a GPL symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by inheriting from MIPS, and the MIPS export was first introduced in commit |
||
|
Huacai Chen
|
1c1378a409 |
LoongArch: Enable PG when wakeup from suspend
Some firmwares don't enable PG when wakeup from suspend, so do it in kernel. This can improve code compatibility for boot kernel. Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
6637775ca3 |
LoongArch: Fix _CONST64_(x) as unsigned
Addresses should all be of unsigned type to avoid unnecessary conversions. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
1cf62488f5 |
LoongArch: Fix build error if CONFIG_SUSPEND is not set
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:
ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'
Here is the call trace:
acpi_pm_prepare()
__acpi_pm_prepare()
acpi_sleep_prepare()
acpi_get_wakeup_address()
loongarch_wakeup_start()
Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.
Fixes:
|
||
|
Huacai Chen
|
df83033604 |
LoongArch: Fix probing of the CRC32 feature
Not all LoongArch processors support CRC32 instructions. This feature is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the previous versions of the ISA manual (and so does in loongarch.h). The CRC32 feature is set unconditionally now, so fix it. BTW, expose the CRC32 feature in /proc/cpuinfo. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
16c52e5030 |
LoongArch: Make WriteCombine configurable for ioremap()
LoongArch maintains cache coherency in hardware, but when paired with LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar to WriteCombine) is out of the scope of cache coherency machanism for PCIe devices (this is a PCIe protocol violation, which may be fixed in newer chipsets). This means WUC can only used for write-only memory regions now, so this option is disabled by default, making WUC silently fallback to SUC for ioremap(). You can enable this option if the kernel is ensured to run on hardware without this bug. Kernel parameter writecombine=on/off can be used to override the Kconfig option. Cc: stable@vger.kernel.org Suggested-by: WANG Xuerui <kernel@xen0n.name> Reviewed-by: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Jakub Kicinski
|
800e68c44f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: tools/testing/selftests/net/config |
||
Mike Rapoport (IBM)
|
7ce6048d3a |
loongarch: drop ranges for definition of ARCH_FORCE_MAX_ORDER
LoongArch defines insane ranges for ARCH_FORCE_MAX_ORDER allowing MAX_ORDER up to 63, which implies maximal contiguous allocation size of 2^63 pages. Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a simple integer with sensible defaults. Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will be able to do so but they won't be mislead by the bogus ranges. Link: https://lkml.kernel.org/r/20230322081727.2516291-1-rppt@kernel.org Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Kirill A. Shutemov
|
23baf831a3 |
mm, treewide: redefine MAX_ORDER sanely
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Niklas Schnelle
|
fcbfe8121a
|
Kconfig: introduce HAS_IOPORT option and select it as necessary
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
George Guo
|
a6f6a95f25 |
LoongArch, bpf: Fix jit to skip speculation barrier opcode
Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.
Also, Wang says:
I can confirm there's currently no speculation barrier equivalent
on LonogArch. (Loongson says there are builtin mitigations for
Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
exploits to mips/LoongArch have all failed a few years ago.)
Without this patch:
$ ./bpf_prog02
[...]
bpf_common.c:123: TBROK: Failed verification: ??? (524)
[...]
Summary:
passed 0
failed 0
broken 1
skipped 0
warnings 0
With this patch:
$ ./bpf_prog02
[...]
Summary:
passed 0
failed 0
broken 0
skipped 0
warnings 0
Fixes:
|
||
Valentin Schneider
|
4c8c3c7f70 |
treewide: Trace IPIs sent via smp_send_reschedule()
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
|
||
Fangrui Song
|
aff69273af |
vdso: Improve cmd_vdso_check to check all dynamic relocations
The actual intention is that no dynamic relocation exists in the VDSO. For this the VDSO build validates that the resulting .so file does not have any relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture, which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative relocations too. However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If a port fails to determine the exact .rel[a].dyn size, the trailing zeros become R_*_NONE relocations. E.g. ld's powerpc port recently fixed https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are generally a no-op in the dynamic loaders. So just ignore them. Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting .so file does not contain any R_* relocation entries except R_*_NONE. Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64 Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64 Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com |
||
Tony Nguyen
|
e485f3a6ea |
ixgb: Remove ixgb driver
There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jakub Kicinski
|
d0ddf5065f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Documentation/bpf/bpf_devel_QA.rst |
||
Josh Poimboeuf
|
071c44e427 |
sched/idle: Mark arch_cpu_idle_dead() __noreturn
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.
There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).
Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.
This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.
Also fixes the following warning:
vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
||
|
Jakub Kicinski
|
36e5e391a2 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZsBwAKCRDbK58LschI g3W1AQCQnO6pqqX5Q2aYDAZPlZRtV2TRLjuqrQE0dHW/XLAbBgD/bgsAmiKhPSCG 2mTt6izpTQVlZB0e8KcDIvbYd9CE3Qc= =EjJQ -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-03-06 We've added 85 non-merge commits during the last 13 day(s) which contain a total of 131 files changed, 7102 insertions(+), 1792 deletions(-). The main changes are: 1) Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses, from Joanne Koong. 2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities, from Andrii Nakryiko. 3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc, from Alexei Starovoitov. 4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps, from Kumar Kartikeya Dwivedi. 5) Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them, from Eduard Zingerman. 6) Make uprobe attachment Android APK aware by supporting attachment to functions inside ELF objects contained in APKs via function names, from Daniel Müller. 7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper to start the timer with absolute expiration value instead of relative one, from Tero Kristo. 8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id, from Tejun Heo. 9) Extend libbpf to support users manually attaching kprobes/uprobes in the legacy/perf/link mode, from Menglong Dong. 10) Implement workarounds in the mips BPF JIT for DADDI/R4000, from Jiaxun Yang. 11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT, from Hengqi Chen. 12) Extend BPF instruction set doc with describing the encoding of BPF instructions in terms of how bytes are stored under big/little endian, from Jose E. Marchesi. 13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui. 14) Fix bpf_xdp_query() backwards compatibility on old kernels, from Yonghong Song. 15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS, from Florent Revest. 16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache, from Hou Tao. 17) Fix BPF verifier's check_subprogs to not unnecessarily mark a subprogram with has_tail_call, from Ilya Leoshkevich. 18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode selftests/bpf: Split test_attach_probe into multi subtests libbpf: Add support to set kprobe/uprobe attach mode tools/resolve_btfids: Add /libsubcmd to .gitignore bpf: add support for fixed-size memory pointer returns for kfuncs bpf: generalize dynptr_get_spi to be usable for iters bpf: mark PTR_TO_MEM as non-null register type bpf: move kfunc_call_arg_meta higher in the file bpf: ensure that r0 is marked scratched after any function call bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper bpf: clean up visit_insn()'s instruction processing selftests/bpf: adjust log_fixup's buffer size for proper truncation bpf: honor env->test_state_freq flag in is_state_visited() selftests/bpf: enhance align selftest's expected log matching bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER} bpf: improve stack slot state printing selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access() selftests/bpf: test if pointer type is tracked for BPF_ST_MEM bpf: allow ctx writes using BPF_ST_MEM instruction bpf: Use separate RCU callbacks for freeing selem ... ==================== Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Josh Poimboeuf
|
6c0f2d071e |
loongarch/cpu: Mark play_dead() __noreturn
play_dead() doesn't return. Annotate it as such. By extension this also makes arch_cpu_idle_dead() noreturn. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/4da55acfdec8a9132c4e21ffb7edb1f846841193.1676358308.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Josh Poimboeuf
|
13bf7923a4 |
loongarch/cpu: Make sure play_dead() doesn't return
play_dead() doesn't return. Make that more explicit with a BUG(). BUG() is preferable to unreachable() because BUG() is a more explicit failure mode and avoids undefined behavior like falling off the edge of the function into whatever code happens to be next. Link: https://lore.kernel.org/r/21245d687ffeda34dbcf04961a2df3724f04f7c8.1676358308.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Linus Torvalds
|
a8356cdb5b |
LoongArch changes for v6.3
1, Make -mstrict-align configurable; 2, Add kernel relocation and KASLR support; 3, Add single kernel image implementation for kdump; 4, Add hardware breakpoints/watchpoints support; 5, Add kprobes/kretprobes/kprobes_on_ftrace support; 6, Add LoongArch support for some selftests. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmP+9H0WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImerz+D/98MjkLXM4qtgfAxuBKpVdEVA4U bzO19UlpqWlwTJbwrhf0GYsRrAis37PTVJG4eNORJairJ/oTkMtEEBPhwq0D9Whc URDEh+VrjzFztLsu2OlvzOA9gE7lpg+xAx2LKflP7ixlOELOWeercDLW3octp5/J CJDE8wPaw9tJrMHFWuiVybs03yZmY3YFV55JdWL9hY8Ryy4DY5997mruOfzjvHpl EfDgQM2zCn2JSQwaD+Kl3MHxHyRx07Tj2wnZAh9ptaGeptK/yplc7nqRwhe7BevS QwClhJNPICcOi+evZ7cDUY0PTL4evpw2KRnF1N4zw+58RhZECjVrCEJNdf6L1scj muptQngWKrE/TJvn4way3cJr44stSCtT71elPhn629S23my/CauMmFqCqKpYOPOf pxwzzCaqDcaZKwMu96qBkZS76tIrhoNeNFntj+C9RS+8ezY3+o144S3vF1A6A9Zb M4gwa2NiQuLqnCUwKK6dZkLQVX2NMIMViUkYNKdUStxNWx/K7fFmXcl0ycAFpGYp 8Q95LLH34jUrpSgqMSCmcylsPvNiN1QnuXFnw8Tu+zDthp5dOzio60tORLPM1ZUq gobPeGjeTQInq4eMCf2B5HH8fOMVtJyj6H4K9G1M6HUMg64UtcBp6BvEbwPxTxNN sIOFUjDfDnBiIXWF4w== =SzL5 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Make -mstrict-align configurable - Add kernel relocation and KASLR support - Add single kernel image implementation for kdump - Add hardware breakpoints/watchpoints support - Add kprobes/kretprobes/kprobes_on_ftrace support - Add LoongArch support for some selftests. * tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits) selftests/ftrace: Add LoongArch kprobe args string tests support selftests/seccomp: Add LoongArch selftesting support tools: Add LoongArch build infrastructure samples/kprobes: Add LoongArch support LoongArch: Mark some assembler symbols as non-kprobe-able LoongArch: Add kprobes on ftrace support LoongArch: Add kretprobes support LoongArch: Add kprobes support LoongArch: Simulate branch and PC* instructions LoongArch: ptrace: Add hardware single step support LoongArch: ptrace: Add function argument access API LoongArch: ptrace: Expose hardware breakpoints to debuggers LoongArch: Add hardware breakpoints/watchpoints support LoongArch: kdump: Add crashkernel=YM handling LoongArch: kdump: Add single kernel image implementation LoongArch: Add support for kernel address space layout randomization (KASLR) LoongArch: Add support for kernel relocation LoongArch: Add la_abs macro implementation LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs LoongArch: Use la.pcrel instead of la.abs when it's trivially possible ... |
||
|
Tiezhu Yang
|
fcf77d0162 |
LoongArch: Mark some assembler symbols as non-kprobe-able
Some assembler symbols are not kprobe safe, such as handle_syscall (used as syscall exception handler), *memset*/*memcpy*/*memmove* (may cause recursive exceptions), they can not be instrumented, just blacklist them for kprobing. Here is a related problem and discussion: Link: https://lore.kernel.org/lkml/20230114143859.7ccc45c1c5d9ce302113ab0a@kernel.org/ Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
09e679c28a |
LoongArch: Add kprobes on ftrace support
Add kprobe_ftrace_handler() and arch_prepare_kprobe_ftrace() to support
kprobes on ftrace, the code is similar with x86 and riscv.
Here is a simple example:
# echo 'p:myprobe kernel_clone' > /sys/kernel/debug/tracing/kprobe_events
# echo 'r:myretprobe kernel_clone $retval' >> /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
# echo 1 > /sys/kernel/debug/tracing/tracing_on
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 2/2 #P:4
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
bash-488 [002] ..... 2041.190681: myprobe: (kernel_clone+0x0/0x40c)
bash-488 [002] ..... 2041.190788: myretprobe: (__do_sys_clone+0x84/0xb8 <- kernel_clone) arg1=0x200
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Tiezhu Yang
|
3f55368600 |
LoongArch: Add kretprobes support
Use the generic kretprobe trampoline handler to add kretprobes support for LoongArch. Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
6d4cc40fb5 |
LoongArch: Add kprobes support
Kprobes allows you to trap at almost any kernel address and execute a callback function, this commit adds kprobes support for LoongArch. Tested-by: Jeff Xie <xiehuan09@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
9b3441a6b0 |
LoongArch: Simulate branch and PC* instructions
According to LoongArch Reference Manual, simulate branch and PC* instructions, this is preparation for later patch. Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#branch-instructions Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_pcaddi_pcaddu121_pcaddu18l_pcalau12i Tested-by: Jeff Xie <xiehuan09@gmail.com> Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
424421a7f3 |
LoongArch: ptrace: Add hardware single step support
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT, PTRACE_KILL and PTRACE_SINGLESTEP handling. This implies defining arch_has_single_step() and implementing the user_enable_single_step() and user_disable_single_step() functions. LoongArch cannot do hardware single-stepping per se, the hardware single-stepping it is achieved by configuring the instruction fetch watchpoints (FWPS) and specifies that the next instruction must trigger the watch exception by setting the mask bit. In some scenarios CSR.FWPS.Skip is used to ignore the next hit result, avoid endless repeated triggering of the same watchpoint without canceling it. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
356bd6f236 |
LoongArch: ptrace: Add function argument access API
Add regs_get_argument() which returns N th argument of the function call, This enables ftrace kprobe events to access kernel function arguments via $argN syntax for later use. E.g.: echo 'p bio_add_page arg1=$arg1' > kprobe_events bash: echo: write error: Invalid argument Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
1a69f7a161 |
LoongArch: ptrace: Expose hardware breakpoints to debuggers
Implement the regset-based ptrace interface that exposes hardware breakpoints to user-space debuggers to query and set instruction and data breakpoints. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
edffa33c7b |
LoongArch: Add hardware breakpoints/watchpoints support
Use perf framework to manage hardware instruction and data breakpoints. LoongArch defines hardware watchpoint functions for instruction fetch and memory load/store operations. After the software configures hardware watchpoints, the processor hardware will monitor the access address of the instruction fetch and load/store operation, and trigger an exception of the watchpoint when it meets the conditions set by the watchpoint. The hardware monitoring points for instruction fetching and load/store operations each have a register for the overall configuration of all monitoring points, a register for recording the status of all monitoring points, and four registers required for configuration of each watchpoint individually. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
35c94fab6e |
LoongArch: kdump: Add crashkernel=YM handling
When the kernel crashkernel parameter is specified with just a size, we are supposed to allocate a region from RAM to store the crashkernel, "crashkernel=512M" would be recommended for kdump. Fix this by lifting similar code from x86, importing it to LoongArch with LoongArch specific parameters added. We allocate the crashkernel region from the first 4GB of physical memory (because SWIOTLB should be allocated below 4GB). However, LoongArch currently does not implement crashkernel_low and crashkernel_high the same as x86. When X is not specified, crash_base defaults to 0 (crashkernel=YM@XM). Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
3f89765d62 |
LoongArch: kdump: Add single kernel image implementation
This feature depends on the kernel being relocatable. Enable using single kernel image for kdump, and then no longer need to build two kernels (production kernel and capture kernel share a single kernel image). Also enable CONFIG_CRASH_DUMP in loongson3_defconfig. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
e5f02b51fa |
LoongArch: Add support for kernel address space layout randomization (KASLR)
This patch adds support for relocating the kernel to a random address. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address. Because relocation happens so early during the kernel booting, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. So we limit the maximum value of RANDOMIZE_BASE_MAX_OFFSET to 256M (0x10000000) because our memory layout has many holes. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Fix compiler warnings Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
d8da19fbde |
LoongArch: Add support for kernel relocation
This config allows to compile kernel as PIE and to relocate it at any virtual address at runtime: this paves the way to KASLR. Runtime relocation is possible since relocation metadata are embedded into the kernel. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Use arch_initcall Signed-off-by: Jinyang He <hejinyang@loongson.cn> # Provide la_abs relocation code Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
396233c650 |
LoongArch: Add la_abs macro implementation
Use the "la_abs macro" instead of the "la.abs pseudo instruction" to prepare for the subsequent PIE kernel. When PIE is not enabled, la_abs is equivalent to la.abs. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
8cbd5ebfe2 |
LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs directly. This is a preparation for subsequent patches. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xi Ruoyao
|
f733f119e9 |
LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
Let's start to kill la.abs in preparation for the subsequent support of the PIE kernel. BTW, Re-tab the indention in arch/loongarch/kernel/entry.S for alignment. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
4159680330 |
LoongArch: Make -mstrict-align configurable
Introduce Kconfig option ARCH_STRICT_ALIGN to make -mstrict-align be configurable. Not all LoongArch cores support h/w unaligned access, we can use the -mstrict-align build parameter to prevent unaligned accesses. CPUs with h/w unaligned access support: Loongson-2K2000/2K3000/3A5000/3C5000/3D5000. CPUs without h/w unaligned access support: Loongson-2K500/2K1000. This option is enabled by default to make the kernel be able to run on all LoongArch systems. But you can disable it manually if you want to run kernel only on systems with h/w unaligned access support in order to optimise for performance. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
bb7a78e343 |
LoongArch: Only call get_timer_irq() once in constant_clockevent_init()
Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see the following messages on LoongArch, this is because using might_sleep() in preemption disable context. [ 0.001127] smp: Bringing up secondary CPUs ... [ 0.001222] Booting CPU#1... [ 0.001244] 64-bit Loongson Processor probed (LA464 Core) [ 0.001247] CPU1 revision is: 0014c012 (Loongson-64bit) [ 0.001250] FPU1 revision is: 00000000 [ 0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.001257] preempt_count: 1, expected: 0 [ 0.001258] RCU nest depth: 0, expected: 0 [ 0.001259] Preemption disabled at: [ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110 [ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43 [ 0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202 [ 0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000 [ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000 [ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50 [ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500 [ 0.001303] 0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020 [ 0.001309] 000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff [ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000 [ 0.001320] 900000000022b69c 0000000000000001 0000000000000000 9000000001736a90 [ 0.001325] 9000000100038000 0000000000000000 9000000000222f34 0000000000000000 [ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.001337] ... [ 0.001339] Call Trace: [ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180 [ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88 [ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc [ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64 [ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124 [ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204 [ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8 [ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64 Here are the complete call chains: smpboot_entry() start_secondary() constant_clockevent_init() get_timer_irq() irq_find_matching_fwnode() irq_find_matching_fwspec() mutex_lock() might_sleep() __might_sleep() __might_resched() In order to avoid the above issue, we should break the call chains, using timer_irq_installed variable as check condition to only call get_timer_irq() once in constant_clockevent_init() is a simple and proper way. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Jinyang He
|
fd200632d0 |
LoongArch: Fix Chinese comma in cpu.h
Fix Chinese comma introduced by accident in cpu.h. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
Hengqi Chen
|
bb035ef0cc |
LoongArch: BPF: Support mixing bpf2bpf and tailcalls
The current implementation already allow such mixing. Let's enable it in JIT. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Link: https://lore.kernel.org/r/20230218105317.4139666-1-hengqi.chen@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Hengqi Chen
|
64f50f6575 |
LoongArch, bpf: Use 4 instructions for function address in JIT
This patch fixes the following issue of function calls in JIT, like:
[ 29.346981] multi-func JIT bug 105 != 103
The issus can be reproduced by running the "inline simple bpf_loop call"
verifier test.
This is because we are emiting 2-4 instructions for 64-bit immediate moves.
During the first pass of JIT, the placeholder address is zero, emiting two
instructions for it. In the extra pass, the function address is in XKVRANGE,
emiting four instructions for it. This change the instruction index in
JIT context. Let's always use 4 instructions for function address in JIT.
So that the instruction sequences don't change between the first pass and
the extra pass for function calls.
Fixes:
|
||
|
Mike Rapoport (IBM)
|
e5080a9677 |
mm, arch: add generic implementation of pfn_valid() for FLATMEM
Every architecture that supports FLATMEM memory model defines its own version of pfn_valid() that essentially compares a pfn to max_mapnr. Use mips/powerpc version implemented as static inline as a generic implementation of pfn_valid() and drop its per-architecture definitions. [rppt@kernel.org: fix the generic pfn_valid()] Link: https://lkml.kernel.org/r/Y9lg7R1Yd931C+y5@kernel.org Link: https://lkml.kernel.org/r/20230129124235.209895-5-rppt@kernel.org Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Huacai Chen <chenhuacai@loongson.cn> [LoongArch] Acked-by: Stafford Horne <shorne@gmail.com> [OpenRISC] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Cc: Brian Cain <bcain@quicinc.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Suren Baghdasaryan
|
1c71222e5f |
mm: replace vma->vm_flags direct modifications with modifier calls
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
David Hildenbrand
|
950fe885a8 |
mm: remove __HAVE_ARCH_PTE_SWP_EXCLUSIVE
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that support swp PTEs, so let's drop it. Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Hildenbrand
|
ad3150f11b |
loongarch/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE
Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE by stealing one bit from the type. Generic MM currently only uses 5 bits for the type (MAX_SWAPFILES_SHIFT), so the stolen bit is effectively unused. While at it, also mask the type in mk_swap_pte(). Note that this bit does not conflict with swap PMDs and could also be used in swap PMD context later. Link: https://lkml.kernel.org/r/20230113171026.582290-9-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Ingo Molnar
|
57a30218fa |
Linux 6.2-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh SDc/Y/c= =zpaD -----END PGP SIGNATURE----- Merge tag 'v6.2-rc6' into sched/core, to pick up fixes Pick up fixes before merging another batch of cpuidle updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Jinyang He
|
dc74a9e8a8 |
LoongArch: Add generic ex-handler unwind in prologue unwinder
When exception is triggered, code flow go handle_\exception in some
cases. One of stackframe in this case as follows,
high -> +-------+
| REGS | <- a pt_regs
| |
| | <- ex trigger
| REGS | <- ex pt_regs <-+
| | |
| | |
low -> +-------+ ->unwind-+
When unwinder unwinds to handler_\exception it cannot go on prologue
analysis. Because it is an asynchronous code flow, we should get the
next frame PC from regs->csr_era rather than regs->regs[1]. At init time
we copy the handlers to eentry and also copy them to NUMA-affine memory
named pcpu_handlers if NUMA is enabled. Thus, unwinder cannot unwind
normally. To solve this, we try to give some hints in handler_\exception
and fixup unwinders in unwind_next_frame().
Reported-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Jinyang He
|
c5ac25e0d7 |
LoongArch: Strip guess unwinder out from prologue unwinder
The prolugue unwinder rely on symbol info. When PC is not in kernel text address, it cannot find relative symbol info and it will be broken. The guess unwinder will be used in this case. And the guess unwinder code in prolugue unwinder is redundant. Strip it out and set the unwinder type in unwind_state. Make guess_unwinder::unwind_next_frame() as default way when other unwinders cannot unwind in some extreme case. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Jinyang He
|
5bb8d34449 |
LoongArch: Use correct sp value to get graph addr in stack unwinders
The stack frame when function_graph enable like follows,
--------- <- function sp_on_entry
|
|
|
FAKE_RA <- sp_on_entry - sizeof(pt_regs) + PT_R1
|
--------- <- sp_on_entry - sizeof(pt_regs)
So if we want to get the &FAKE_RA we should get sp_on_entry first. In
the unwinder_prologue case, we can get the sp_on_entry as state->sp,
because we try to calculate each CFA and the ra saved address. But in
the unwinder_guess case, we cannot get it because we do not try to
calculate the CFA. Although LoongArch have not fixed frame, the $ra is
saved at CFA - 8 in most cases, we can try guess, too. As we store the
pc in state, we not need to dereference state->sp, too.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Jinyang He
|
429a9671f2 |
LoongArch: Get frame info in unwind_start() when regs is not available
At unwind_start(), it is better to get its frame info here rather than
get them outside, even we don't have 'regs'. In this way we can simply
use unwind_{start, next_frame, done} outside.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Jinyang He
|
e2f2739227 |
LoongArch: Adjust PC value when unwind next frame in unwinder
When state->first is not set, the PC is a return address in the previous frame. We need to adjust its value in case overflow to the next symbol. Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
3200983fa8 |
LoongArch: Simplify larch_insn_gen_xxx implementation
Simplify larch_insn_gen_xxx implementation by reusing emit_xxx. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
2959fce7fd |
LoongArch: Use common function sign_extend64()
There exists a common function sign_extend64() to sign extend a 64-bit value using specified bit as sign-bit in include/linux/bitops.h, it is more efficient, let us use it and remove the arch-specific sign_extend() under arch/loongarch. Suggested-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
d52fec86a4 |
LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap
HWCAP_LOONGARCH_CPUCFG is missing in elf_hwcap, so add it for glibc's later use. Cc: stable@vger.kernel.org Reported-by: Yinyu Cai <caiyinyu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Peter Zijlstra
|
89b3098703 |
arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled
Current arch_cpu_idle() is called with IRQs disabled, but will return with IRQs enabled. However, the very first thing the generic code does after calling arch_cpu_idle() is raw_local_irq_disable(). This means that architectures that can idle with IRQs disabled end up doing a pointless 'enable-disable' dance. Therefore, push this IRQ disabling into the idle function, meaning that those architectures can avoid the pointless IRQ state flipping. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org |
||
|
Peter Zijlstra
|
2b5a0e425e |
objtool/idle: Validate __cpuidle code as noinstr
Idle code is very like entry code in that RCU isn't available. As such, add a little validation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org |
||
|
Linus Torvalds
|
2f26e42455 |
LoongArch changes for v6.2
1, Switch to relative exception tables; 2, Add unaligned access support; 3, Add alternative runtime patching mechanism; 4, Add FDT booting support from efi system table; 5, Add suspend/hibernation (ACPI S3/S4) support; 6, Add basic STACKPROTECTOR support; 7, Add ftrace (function tracer) support; 8, Update the default config file. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmOZHLwWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImege9D/0XkNpVHM/8H2JaEKT7V8PldsPb l8JIsU8UJRebcB9vOLHCfotFB3MuUakvAq6Mse+hQTGuajb9iIo3Zrpy4UG3WcEn 3UF6YwT8UZ4MBJzlJvZT8G1465xYDCnL57VsbYYmkatZYwkOhVGvwdAPWlA5l86e LoFsmAxUYdk4RtdUNrvyhKMeeVwx4WWgKEitx8vXv18G8C+tabwSro58n5x/RxBL T82Pgy2aPA58ccUvbxctzNytPlem+WKRqKKCUCRzJPeJ1O4E/DIyR6kACb9Dv5Eh GVxF6P98+KL3XckNxwNgoeY54j+NmD23z1qZJqPW8DN8gNVU3zZBNYfuEXSuff9i Ti4NuFrRtWyJHkb8Gc0zkMZV6AjnQsuO8KF9NE/Bki88g+1WbE9xrbyJkAqhGggj ddSkVs5duXxzL/10RAcyZbdG1/IsIReRifi52FYe/3QsMOAbTR3RHehv8k803ITM sXrl4KoTmfe9/tNCIP205ipXO3xw7PRjOSZtOXIMhHcAq5SLAXAw+1TbWC9xyzAL LQMIoQHA1Q+AhD4wXk3HK+8i9jzZzPsdu1/N33VEfSLLwpguQ3JDBYmw2tTmWxQR Yo3YJIj3L78FGUPFOSiKiHMsEcwh7QggSdqIcM33Y2XQPTyr5n9pZ0liclgQrl5a /jfLo1FQxCVNztChEw== =iplm -----END PGP SIGNATURE----- Merge tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Switch to relative exception tables - Add unaligned access support - Add alternative runtime patching mechanism - Add FDT booting support from efi system table - Add suspend/hibernation (ACPI S3/S4) support - Add basic STACKPROTECTOR support - Add ftrace (function tracer) support - Update the default config file * tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) LoongArch: Update Loongson-3 default config file LoongArch: modules/ftrace: Initialize PLT at load time LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support LoongArch/ftrace: Add dynamic function graph tracer support LoongArch/ftrace: Add dynamic function tracer support LoongArch/ftrace: Add recordmcount support LoongArch/ftrace: Add basic support LoongArch: module: Use got/plt section indices for relocations LoongArch: Add basic STACKPROTECTOR support LoongArch: Add hibernation (ACPI S4) support LoongArch: Add suspend (ACPI S3) support LoongArch: Add processing ISA Node in DeviceTree LoongArch: Add FDT booting support from efi system table LoongArch: Use alternative to optimize libraries LoongArch: Add alternative runtime patching mechanism LoongArch: Add unaligned access support LoongArch: BPF: Add BPF exception tables LoongArch: Remove the .fixup section usage ... |
||
|
Linus Torvalds
|
e2ca6ba6ba |
MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
|
Huacai Chen
|
5535f4f70c |
LoongArch: Update Loongson-3 default config file
1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
28ac0a9e04 |
LoongArch: modules/ftrace: Initialize PLT at load time
This patch implements ftrace trampolines through plt entry. Tested by forcing ftrace_make_call() to use the module PLT, and then loading up a module after setting up ftrace with: | echo ":mod:<module-name>" > set_ftrace_filter; | echo function > current_tracer; | modprobe <module-name> Since FTRACE_ADDR/FTRACE_REGS_ADDR is only defined when CONFIG_DYNAMIC_ FTRACE is selected, we wrap their usage in module_init_ftrace_plt() with ifdeffery rather than using IS_ENABLED(). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
a51ac5246d |
LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
ftrace_graph_ret_addr() can be called by stack unwinding code to convert
a found stack return address ('ret') to its original value, in case the
function graph tracer has modified it to be 'return_to_handler'. If the
hasn't been modified, the unchanged value of 'ret' is returned.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Qing Zhang
|
ac7127e1cc |
LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support
Allow for arguments to be passed in to ftrace_regs by default. If this is set, then arguments and stack can be found from the pt_regs. 1. HAVE_DYNAMIC_FTRACE_WITH_ARGS don't need special hook for graph tracer entry point, but instead we can use graph_ops::func function to install the return_hooker. 2. Livepatch requires this option in the future. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
8778ba2c8a |
LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support
This patch implements CONFIG_DYNAMIC_FTRACE_WITH_REGS on LoongArch, which allows a traced function's arguments (and some other registers) to be captured into a struct pt_regs, allowing these to be inspected and modified. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
5fcfad3d41 |
LoongArch/ftrace: Add dynamic function graph tracer support
Once the function_graph tracer is enabled, a filtered function has the following call sequence: 1) ftracer_caller ==> on/off by ftrace_make_call/ftrace_make_nop 2) ftrace_graph_caller 3) ftrace_graph_call ==> on/off by ftrace_en/disable_ftrace_graph_caller 4) prepare_ftrace_return Considering the following DYNAMIC_FTRACE_WITH_REGS feature, it would be more extendable to have a ftrace_graph_caller function, instead of calling prepare_ftrace_return directly in ftrace_caller. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
4733f09d88 |
LoongArch/ftrace: Add dynamic function tracer support
The compiler has inserted 2 NOPs before the regular function prologue. T series registers are available and safe because of LoongArch's psABI. At runtime, we can replace nop with bl to enable ftrace call and replace bl with nop to disable ftrace call. The bl instruction requires us to save the original RA value, so it saves RA at t0 here. Details are: | Compiled | Disabled | Enabled | +------------+------------------------+------------------------+ | nop | move t0, ra | move t0, ra | | nop | nop | bl ftrace_caller | | func_body | func_body | func_body | The RA value will be recovered by ftrace_regs_entry, and restored into RA before returning to the regular function prologue. When a function is not being traced, the "move t0, ra" is not harmful. 1) ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c) The two functions turn each recorded call site of filtered functions into a call to ftrace_caller or nops. 2) ftracce_update_ftrace_func (in kernel/ftrace.c) turns the nops at ftrace_call into a call to a generic entry for function tracers. 3) ftrace_caller (in kernel/mcount_dyn.S) The entry where each _mcount call sites calls to once they are filtered to be traced. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
a0a458fbd6 |
LoongArch/ftrace: Add recordmcount support
Recordmcount utility under scripts is run, after compiling each object, to find out all the locations of calling _mcount() and put them into specific seciton named __mcount_loc. Then the linker collects all such information into a table in the kernel image (between __start_mcount_loc and __stop_mcount_loc) for later use by ftrace. This patch adds LoongArch specific definitions to identify such locations. And on LoongArch, only the C version is used to build the kernel now that CONFIG_HAVE_C_RECORDMCOUNT is on. Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Qing Zhang
|
dbe3ba3018 |
LoongArch/ftrace: Add basic support
This patch contains basic ftrace support for LoongArch. Specifically, function tracer (HAVE_FUNCTION_TRACER), function graph tracer (HAVE_ FUNCTION_GRAPH_TRACER) are implemented following the instructions in Documentation/trace/ftrace-design.txt. Use `-pg` makes stub like a child function `void _mcount(void *ra)`. Thus, it can be seen store RA and alloc stack before `call _mcount`. Find `alloc stack` at first, and then find `store RA`. Note that the functions in both inst.c and time.c should not be hooked with the compiler's -pg option: to prevent infinite self-referencing for the former, and to ignore early setup stuff for the latter. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
9151dde403 |
LoongArch: module: Use got/plt section indices for relocations
Instead of saving a pointer to the .got, .plt and .plt_idx sections to
apply {got,plt}-based relocations, save and use their section indices
instead.
The mod->arch.{core,init}.{got,plt} pointers were problematic for live-
patch because they pointed within temporary section headers (provided by
the module loader via info->sechdrs) that would be freed after module
load. Since livepatch modules may need to apply relocations post-module-
load (for example, to patch a module that is loaded later), using section
indices to offset into the section headers (instead of accessing them
through a saved pointer) allows livepatch modules on LoongArch to pass
in their own copy of the section headers to apply_relocate_add() to
apply delayed relocations.
The method used is same as commit
|
||
|
Huacai Chen
|
09f33601bf |
LoongArch: Add basic STACKPROTECTOR support
Add basic stack protector support similar to other architectures. A constant canary value is set at boot time, and with help of compiler's -fstack-protector we can detect stack corruption. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
7db54bfe44 |
LoongArch: Add hibernation (ACPI S4) support
Add hibernation (Suspend to Disk, aka ACPI S4) support for LoongArch. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
366bb35a8e |
LoongArch: Add suspend (ACPI S3) support
Add suspend (Suspend To RAM, aka ACPI S3) support for LoongArch. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Binbin Zhou
|
27cab43156 |
LoongArch: Add processing ISA Node in DeviceTree
Similar to commit
|
||
|
Binbin Zhou
|
88d4d957ed |
LoongArch: Add FDT booting support from efi system table
Since commit 40cd01a9c324("efi/loongarch: libstub: remove dependency on
flattened DT"), we can parse the FDT from efi system table.
And now, LoongArch is coming to support booting with FDT, so we add the
relevant booting support as well as parameter parsing.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Huacai Chen
|
a275a82dcd |
LoongArch: Use alternative to optimize libraries
Use the alternative to optimize common libraries according whether CPU
has UAL (hardware unaligned access support) feature, including memset(),
memcopy(), memmove(), copy_user() and clear_user().
We have tested UnixBench on a Loongson-3A5000 quad-core machine (1.6GHz):
1, One copy, before patch:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 9566582.0 819.8
Double-Precision Whetstone 55.0 2805.3 510.1
Execl Throughput 43.0 2120.0 493.0
File Copy 1024 bufsize 2000 maxblocks 3960.0 209833.0 529.9
File Copy 256 bufsize 500 maxblocks 1655.0 89400.0 540.2
File Copy 4096 bufsize 8000 maxblocks 5800.0 320036.0 551.8
Pipe Throughput 12440.0 340624.0 273.8
Pipe-based Context Switching 4000.0 109939.1 274.8
Process Creation 126.0 4728.7 375.3
Shell Scripts (1 concurrent) 42.4 2223.1 524.3
Shell Scripts (8 concurrent) 6.0 883.1 1471.9
System Call Overhead 15000.0 518639.1 345.8
========
System Benchmarks Index Score 500.2
2, One copy, after patch:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 9567674.7 819.9
Double-Precision Whetstone 55.0 2805.5 510.1
Execl Throughput 43.0 2392.7 556.4
File Copy 1024 bufsize 2000 maxblocks 3960.0 417804.0 1055.1
File Copy 256 bufsize 500 maxblocks 1655.0 112909.5 682.2
File Copy 4096 bufsize 8000 maxblocks 5800.0 1255207.4 2164.2
Pipe Throughput 12440.0 555712.0 446.7
Pipe-based Context Switching 4000.0 99964.5 249.9
Process Creation 126.0 5192.5 412.1
Shell Scripts (1 concurrent) 42.4 2302.4 543.0
Shell Scripts (8 concurrent) 6.0 919.6 1532.6
System Call Overhead 15000.0 511159.3 340.8
========
System Benchmarks Index Score 640.1
3, Four copies, before patch:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 38268610.5 3279.2
Double-Precision Whetstone 55.0 11222.2 2040.4
Execl Throughput 43.0 7892.0 1835.3
File Copy 1024 bufsize 2000 maxblocks 3960.0 235149.6 593.8
File Copy 256 bufsize 500 maxblocks 1655.0 74959.6 452.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 545048.5 939.7
Pipe Throughput 12440.0 1337359.0 1075.0
Pipe-based Context Switching 4000.0 473663.9 1184.2
Process Creation 126.0 17491.2 1388.2
Shell Scripts (1 concurrent) 42.4 6865.7 1619.3
Shell Scripts (8 concurrent) 6.0 1015.9 1693.1
System Call Overhead 15000.0 1899535.2 1266.4
========
System Benchmarks Index Score 1278.3
4, Four copies, after patch:
System Benchmarks Index Values BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 38272815.5 3279.6
Double-Precision Whetstone 55.0 11222.8 2040.5
Execl Throughput 43.0 8839.2 2055.6
File Copy 1024 bufsize 2000 maxblocks 3960.0 313912.9 792.7
File Copy 256 bufsize 500 maxblocks 1655.0 80976.1 489.3
File Copy 4096 bufsize 8000 maxblocks 5800.0 1176594.3 2028.6
Pipe Throughput 12440.0 2100941.9 1688.9
Pipe-based Context Switching 4000.0 476696.4 1191.7
Process Creation 126.0 18394.7 1459.9
Shell Scripts (1 concurrent) 42.4 7172.2 1691.6
Shell Scripts (8 concurrent) 6.0 1058.3 1763.9
System Call Overhead 15000.0 1874714.7 1249.8
========
System Benchmarks Index Score 1488.8
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Huacai Chen
|
19e5eb15b0 |
LoongArch: Add alternative runtime patching mechanism
Introduce the "alternative" mechanism from ARM64 and x86 for LoongArch to apply runtime patching. The main purpose of this patch is to provide a framework. In future we can use this mechanism (i.e., the ALTERNATIVE and ALTERNATIVE_2 macros) to optimize hotspot functions according to cpu features. Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
61a6fccc0b |
LoongArch: Add unaligned access support
Loongson-2 series (Loongson-2K500, Loongson-2K1000) don't support unaligned access in hardware, while Loongson-3 series (Loongson-3A5000, Loongson-3C5000) are configurable whether support unaligned access in hardware. This patch add unaligned access emulation for those LoongArch processors without hardware support. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
dbcd7f5faf |
LoongArch: BPF: Add BPF exception tables
Inspired by commit 800834285361("bpf, arm64: Add BPF exception tables"),
do similar to LoongArch to add BPF exception tables.
When a tracing BPF program attempts to read memory without using the
bpf_probe_read() helper, the verifier marks the load instruction with
the BPF_PROBE_MEM flag. Since the LoongArch JIT does not currently
recognize this flag it falls back to the interpreter.
Add support for BPF_PROBE_MEM, by appending an exception table to the
BPF program. If the load instruction causes a data abort, the fixup
infrastructure finds the exception table and fixes up the fault, by
clearing the destination register and jumping over the faulting
instruction.
To keep the compact exception table entry format, inspect the pc in
fixup_exception(). A more generic solution would add a "handler" field
to the table entry, like on x86, s390 and arm64, etc.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Youling Tang
|
912bcfaf36 |
LoongArch: Remove the .fixup section usage
Use the `.L_xxx` label to improve fixup code and then remove the .fixup section usage. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Youling Tang
|
672999cfae |
LoongArch: extable: Add a dedicated uaccess handler
Inspired by commit 2e77a62cb3a6("arm64: extable: add a dedicated uaccess
handler"), do similar to LoongArch to add a dedicated uaccess exception
handler to update registers in exception context and subsequently return
back into the function which faulted, so we remove the need for fixups
specialized to each faulting instruction.
Add gpr-num.h here because we need to map the same GPR names to integer
constants, so that we can use this to build meta-data for the exception
fixups.
The compiler treats gpr 0 as zero rather than $r0, so set it separately
to .L__gpr_num_zero, otherwise the following assembly error will occurs:
{standard input}: Assembler messages:
{standard input}:1074: Error: invalid operands (*UND* and *ABS* sections) for `<<'
{standard input}:1160: Error: invalid operands (*UND* and *ABS* sections) for `<<'
make[1]: *** [scripts/Makefile.build:249: fs/fcntl.o] Error 1
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Youling Tang
|
26bc824412 |
LoongArch: extable: Add type and data fields
This is a LoongArch port of commit
|
||
|
Youling Tang
|
3d36f4298b |
LoongArch: Switch to relative exception tables
Similar to other architectures such as arm64, x86, riscv and so on, use
offsets relative to the exception table entry values rather than their
absolute addresses for both the exception location and the fixup.
However, LoongArch label difference because it will actually produce two
relocations, a pair of R_LARCH_ADD32 and R_LARCH_SUB32. Take simple code
below for example:
$ cat test_ex_table.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ loongarch64-unknown-linux-gnu-gcc -c test_ex_table.S
$ loongarch64-unknown-linux-gnu-readelf -Wr test_ex_table.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000600000032 R_LARCH_ADD32 0000000000000000 .L1^B1 + 0
0000000000000000 0000000500000037 R_LARCH_SUB32 0000000000000000 L0^A + 0
The modpost will complain the R_LARCH_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Youling Tang
|
508f28c671 |
LoongArch: Consolidate __ex_table construction
Consolidate all the __ex_table constuction code with a _ASM_EXTABLE or _asm_extable helper. There should be no functional change as a result of this patch. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
fc4c9f4504 |
EFI updates for v6.2:
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB or
systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it to
recover from synchronous exceptions that might occur in the firmware
code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records
-----BEGIN PGP SIGNATURE-----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=JEXz
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
||
|
Huacai Chen
|
1a34e7f2fc |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
mergetag object
|
||
|
Linus Torvalds
|
268325bda5 |
Random number generator updates for Linux 6.2-rc1.
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
||
|
Linus Torvalds
|
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH
wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl
RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq
ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8
MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1
W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s
FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/
UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN
TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr
O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V
eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI
IaV6cv6ILoqO
=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
||
|
Linus Torvalds
|
9d33edb20f |
Updates for the interrupt core and driver subsystem:
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
|
||
|
Linus Torvalds
|
1fab45ab6e |
RCU pull request for v6.2
This pull request contains the following branches: doc.2022.10.20a: Documentation updates. This is the second in a series from an ongoing review of the RCU documentation. fixes.2022.10.21a: Miscellaneous fixes. lazy.2022.11.30a: Introduces a default-off Kconfig option that depends on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce delays. These delays result in significant power savings on nearly idle Android and ChromeOS systems. These savings range from a few percent to more than ten percent. This series also includes several commits that change call_rcu() to a new call_rcu_hurry() function that avoids these delays in a few cases, for example, where timely wakeups are required. Several of these are outside of RCU and thus have acks and reviews from the relevant maintainers. srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe() for architectures that support NMIs, but which do not provide NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required by the upcoming lockless printk() work by John Ogness et al. That printk() series depends on these commits, so if you pull the printk() series before this one, you will have already pulled in this branch, plus two more SRCU commits: |
||
Rafael J. Wysocki
|
888bc86e7c |
Merge branch 'acpica'
Merge ACPICA changes, including bug fixes and cleanups as well as support for some recently defined data structures, for 6.2-rc1: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki). - Add support for loong_arch-specific APICs in MADT (Huacai Chen). - Add support for fixed PCIe wake event (Huacai Chen). - Add EBDA pointer sanity checks (Vit Kabele). - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele). - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan). - Add a couple of new UUIDs to the known UUID list (Bob Moore). - Add support for FFH Opregion special context data (Sudeep Holla). - Improve warning message for "invalid ACPI name" (Bob Moore). - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield). - Prepare IORT support for revision E.e (Robin Murphy). - Finish support for the CDAT table (Bob Moore). - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki). - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao). - Update the version of the ACPICA code in the kernel (Bob Moore). * acpica: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPICA: Fix error code path in acpi_ds_call_control_method() ACPICA: Update version to 20221020 ACPICA: Add utcksum.o to the acpidump Makefile Revert "LoongArch: Provisionally add ACPICA data structures" ACPICA: Finish support for the CDAT table ACPICA: IORT: Update for revision E.e ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table ACPICA: Improve warning message for "invalid ACPI name" ACPICA: Add support for FFH Opregion special context data ACPICA: Add a couple of new UUIDs to the known UUID list ACPICA: iASL: Add CCEL table to both compiler/disassembler ACPICA: Do not touch VGA memory when EBDA < 1ki_b ACPICA: Check that EBDA pointer is in valid memory ACPICA: Events: Support fixed PCIe wake event ACPICA: MADT: Add loong_arch-specific APICs support ACPICA: Make acpi_ex_load_op() match upstream |
||
Feiyang Chen
|
c5a303a51b |
LoongArch: enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
The feature of minimizing overhead of struct page associated with each HugeTLB page is implemented on x86_64. However, the infrastructure of this feature is already there, so just select ARCH_WANT_HUGETLB_PAGE_ OPTIMIZE_VMEMMAP is enough to enable this feature for LoongArch. Link: https://lkml.kernel.org/r/20221027125253.3458989-5-chenhuacai@loongson.cn Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Min Zhou <zhoumin@loongson.cn> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Feiyang Chen
|
2045a3b891 |
mm/sparse-vmemmap: generalise vmemmap_populate_hugepages()
Generalise vmemmap_populate_hugepages() so ARM64 & X86 & LoongArch can share its implementation. Link: https://lkml.kernel.org/r/20221027125253.3458989-4-chenhuacai@loongson.cn Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Will Deacon <will@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Min Zhou <zhoumin@loongson.cn> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Feiyang Chen
|
7b09f5af01 |
LoongArch: add sparse memory vmemmap support
Add sparse memory vmemmap support for LoongArch. SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise pfn_to_page and page_to_pfn operations. This is the most efficient option when sufficient kernel resources are available. Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn Signed-off-by: Min Zhou <zhoumin@loongson.cn> Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Feiyang Chen
|
22c4e80466 |
MIPS&LoongArch&NIOS2: adjust prototypes of p?d_init()
Patch series "mm/sparse-vmemmap: Generalise helpers and enable for LoongArch", v14. This series is in order to enable sparse-vmemmap for LoongArch. But LoongArch cannot use generic helpers directly because MIPS&LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating page tables. So we adjust the prototypes of p?d_init() to make generic helpers can call them, then enable sparse-vmemmap with generic helpers, and to be further, generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch. This patch (of 4): We are preparing to add sparse vmemmap support to LoongArch. MIPS and LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating page tables, so adjust their prototypes to make generic helpers can call them. NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build errors. Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Min Zhou <zhoumin@loongson.cn> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huacai Chen
|
b681604eda |
LoongArch: mm: Fix huge page entry update for virtual machine
In virtual machine (guest mode), the tlbwr instruction can not write the last entry of MTLB, so we need to make it non-present by invtlb and then write it by tlbfill. This also simplify the whole logic. Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
143d64bdbd |
LoongArch: Export symbol for function smp_send_reschedule()
Function smp_send_reschedule() is standard kernel API, which is defined in header file include/linux/smp.h. However, on LoongArch it is defined as an inline function, this is confusing and kernel modules can not use this function. Now we define smp_send_reschedule() as a general function, and add a EXPORT_SYMBOL_GPL on this function, so that kernel modules can use it. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Ard Biesheuvel
|
d9f26ae731 |
Linux 6.1-rc8
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmONI6weHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG9xgH/jqXGuMoO1ikfmGb 7oY0W/f69G9V/e0DxFLvnIjhFgCUzdnNsmD4jQJA4x6QsxwLWuvpI282Ez+bHV5T U4RPsxJZIIMsXE2lKM9BRgeLzDdCt0aK4Pj+3x2x7NZC5cWFSQ8PyQJkCwg+0PQo u8Ly+GO8c4RUMf4/rrAZQq16qZUqGDaGm1EJhtSoa+KiR81LmUUmbDIK9Mr53rmQ wou+95XhibwMWr17WgXA28bTgYqn9UGr67V3qvTH2LC7GW8BCoKvn+3wh6TVhlWj dsWplXgcOP0/OHvSC5Sb1Uibk5Gx3DlIzYa6OfNZQuZ5xmQqm9kXjW8lmYpWFHy/ 38/5HWc= =EuoA -----END PGP SIGNATURE----- Merge tag 'v6.1-rc8' into efi/next Linux 6.1-rc8 |
||
|
Thomas Gleixner
|
6132a490f9 |
irqchip updates for 6.2
- More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmOQsZ8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDQMwQAJWBLgkSHnPSJizG+KLpDSljRmkUif7j3PBk TVCwfj/xXiCUzP7PBhq2DUZWLvrKIiYl79Z6j/Jz4xlavPAVp6Cs+afxmJF2n/wy OwWF8uevHvFhKIFJUFxrSDaODWGI6afmDT7iflE3/Uz2ahVYoLkz5a10ji78N3JU peeX81i/kZE19w1aCs0sdMgzJufjK98hj55917GGv/IRBAjj2qi2tOZnPdQuE6d4 +vDiRtKDjDZYp9toaaH7DGBlBMG/yQzBhPaXtMnxH9wGK5858sYmHZroeM4FFbPR sJ/rCiaBEuvC6F1JkShKsRqT2DW1BgXYjSPxh+qhzwCOSG32DDjkj6LqVkygSoKQ MogCIkC3C4D0BIiokSdJByN1PWjoynwtYJrUkYPk4fMg7JxHYwee9dCptT81irMM +3L1mqx9CAll7YkzPVwrCbFyJF9K4ax9kjEvSH3E8xZxLKGnS9iqjQBfE9NKILCl tT6dmCJXTXsoGFjK4zz4o2N8i8aOeUz/B3GX5eYD+x0s0riXhg4kYIWFVXsxwJlX VSxBphr5fAQrdgBdOOESmiqNxPv9HuLRyR2mZ4blE4ylDa9NRUd+4UTy8x0bRmxD BO7qPof0CnrplBNEQi7kDtc91q4UxQoOV/G8LoFp454d9imMlAuPMbizTAULpWZu JxPXyrJl =fhi8 -----END PGP SIGNATURE----- Merge tag 'irqchip-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates frim Marc Zyngier: - More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes |
||
|
Ard Biesheuvel
|
29636a5ce8 |
efi: Put Linux specific magic number in the DOS header
GRUB currently relies on the magic number in the image header of ARM and arm64 EFI kernel images to decide whether or not the image in question is a bootable kernel. However, the purpose of the magic number is to identify the image as one that implements the bare metal boot protocol, and so GRUB, which only does EFI boot, is limited unnecessarily to booting images that could potentially be booted in a non-EFI manner as well. This is problematic for the new zboot decompressor image format, as it can only boot in EFI mode, and must therefore not use the bare metal boot magic number in its header. For this reason, the strict magic number was dropped from GRUB, to permit essentially any kind of EFI executable to be booted via the 'linux' command, blurring the line between the linux loader and the chainloader. So let's use the same field in the DOS header that RISC-V and arm64 already use for their 'bare metal' magic numbers to store a 'generic Linux kernel' magic number, which can be used to identify bootable kernel images in PE format which don't necessarily implement a bare metal boot protocol in the same binary. Note that, in the context of EFI, the MS-DOS header is only described in terms of the fields that it shares with the hybrid PE/COFF image format, (i.e., the MS-DOS EXE magic number at offset #0 and the PE header offset at byte offset #0x3c). Since we aim for compatibility with EFI only, and not with MS-DOS or MS-Windows, we can use the remaining space in the MS-DOS header however we want. Let's set the generic magic number for x86 images as well: existing bootloaders already have their own methods to identify x86 Linux images that can be booted in a non-EFI manner, and having the magic number in place there will ease any future transitions in loader implementations to merge the x86 and non-x86 EFI boot paths. Note that 32-bit ARM already uses the same location in the header for a different purpose, but the ARM support is already widely implemented and the EFI zboot decompressor is not available on ARM anyway, so we just disregard it here. Acked-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Torvalds
|
bdaa78c6aa |
15 hotfixes. 11 marked cc:stable. Only three or four of the latter
address post-6.0 issues, which is hopefully a sign that things are converging. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4pQpQAKCRDdBJ7gKXxA jquxAP9Lqif7CGDgdq8uWY2hHS/Ujc3k7Ohgyzs37olnCuU8KwEA6/J7SpjsBgtY OfzvnwxpCTh8Kfzu/oNckIHo/EEiIA8= =o6qT -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "15 hotfixes, 11 marked cc:stable. Only three or four of the latter address post-6.0 issues, which is hopefully a sign that things are converging" * tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible" Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: take the right locks for page table retraction mm: migrate: fix THP's mapcount on isolation mm: introduce arch_has_hw_nonleaf_pmd_young() mm: add dummy pmd_young() for architectures not having it mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep" nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing madvise: use zap_page_range_single for madvise dontneed mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE |
||
Andrew Morton
|
a38358c934 | Merge branch 'mm-hotfixes-stable' into mm-stable | ||
Juergen Gross
|
6617da8fb5 |
mm: add dummy pmd_young() for architectures not having it
In order to avoid #ifdeffery add a dummy pmd_young() implementation as a fallback. This is required for the later patch "mm: introduce arch_has_hw_nonleaf_pmd_young()". Link: https://lkml.kernel.org/r/fd3ac3cd-7349-6bbd-890a-71a9454ca0b3@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huacai Chen
|
70f7b6c008 |
irqchip/loongson-htvec: Add ACPI init support
HTVECINTC stands for "HyperTransport Interrupts" that described in Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Though the extended model is the recommended one, there are still some legacy model machines. So we add ACPI init support for HTVECINTC. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn |
||
KaiLong Wang
|
b96e74bb43 |
LoongArch: Fix unsigned comparison with less than zero
Eliminate the following coccicheck warning: ./arch/loongarch/kernel/unwind_prologue.c:84:5-13: WARNING: Unsigned expression compared with zero: frame_ra < 0 Signed-off-by: KaiLong Wang <wangkailong@jari.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
54e6cd42a1 |
LoongArch: Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite()
Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite().
Otherwise, _PAGE_DIRTY silences the TLB modify exception and make us
have no chance to mark a pmd/pte dirty (_PAGE_MODIFIED) for software.
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Huacai Chen
|
bf2f34a506 |
LoongArch: Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()
Now {pmd,pte}_mkdirty() set _PAGE_DIRTY bit unconditionally, this causes
random segmentation fault after commit
|
||
|
Huacai Chen
|
e428e96135 |
LoongArch: Clear FPU/SIMD thread info flags for kernel thread
If a kernel thread is created by a user thread, it may carry FPU/SIMD thread info flags (TIF_USEDFPU, TIF_USEDSIMD, etc.). Then it will be considered as a fpu owner and kernel try to save its FPU/SIMD context and cause such errors: [ 41.518931] do_fpu invoked from kernel context![#1]: [ 41.523933] CPU: 1 PID: 395 Comm: iou-wrk-394 Not tainted 6.1.0-rc5+ #217 [ 41.530757] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.pre-beta8 08/18/2022 [ 41.544064] $ 0 : 0000000000000000 90000000011e9468 9000000106c7c000 9000000106c7fcf0 [ 41.552101] $ 4 : 9000000106305d40 9000000106689800 9000000106c7fd08 0000000003995818 [ 41.560138] $ 8 : 0000000000000001 90000000009a72e4 0000000000000020 fffffffffffffffc [ 41.568174] $12 : 0000000000000000 0000000000000000 0000000000000020 00000009aab7e130 [ 41.576211] $16 : 00000000000001ff 0000000000000407 0000000000000001 0000000000000000 [ 41.584247] $20 : 0000000000000000 0000000000000001 9000000106c7fd70 90000001002f0400 [ 41.592284] $24 : 0000000000000000 900000000178f740 90000000011e9834 90000001063057c0 [ 41.600320] $28 : 0000000000000000 0000000000000001 9000000006826b40 9000000106305140 [ 41.608356] era : 9000000000228848 _save_fp+0x0/0xd8 [ 41.613542] ra : 90000000011e9468 __schedule+0x568/0x8d0 [ 41.619160] CSR crmd: 000000b0 [ 41.619163] CSR prmd: 00000000 [ 41.622359] CSR euen: 00000000 [ 41.625558] CSR ecfg: 00071c1c [ 41.628756] CSR estat: 000f0000 [ 41.635239] ExcCode : f (SubCode 0) [ 41.638783] PrId : 0014c010 (Loongson-64bit) [ 41.643191] Modules linked in: acpi_ipmi vfat fat ipmi_si ipmi_devintf cfg80211 ipmi_msghandler rfkill fuse efivarfs [ 41.653734] Process iou-wrk-394 (pid: 395, threadinfo=0000000004ebe913, task=00000000636fa1be) [ 41.662375] Stack : 00000000ffff0875 9000000006800ec0 9000000006800ec0 90000000002d57e0 [ 41.670412] 0000000000000001 0000000000000000 9000000106535880 0000000000000001 [ 41.678450] 9000000105291800 0000000000000000 9000000105291838 900000000178e000 [ 41.686487] 9000000106c7fd90 9000000106305140 0000000000000001 90000000011e9834 [ 41.694523] 00000000ffff0875 90000000011f034c 9000000105291838 9000000105291830 [ 41.702561] 0000000000000000 9000000006801440 00000000ffff0875 90000000002d48c0 [ 41.710597] 9000000128800001 9000000106305140 9000000105291838 9000000105291838 [ 41.718634] 9000000105291830 9000000107811740 9000000105291848 90000000009bf1e0 [ 41.726672] 9000000105291830 9000000107811748 2d6b72772d756f69 0000000000343933 [ 41.734708] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 41.742745] ... [ 41.745252] Call Trace: [ 42.197868] [<9000000000228848>] _save_fp+0x0/0xd8 [ 42.205214] [<90000000011ed468>] __schedule+0x568/0x8d0 [ 42.210485] [<90000000011ed834>] schedule+0x64/0xd4 [ 42.215411] [<90000000011f434c>] schedule_timeout+0x88/0x188 [ 42.221115] [<90000000009c36d0>] io_wqe_worker+0x184/0x350 [ 42.226645] [<9000000000221cf0>] ret_from_kernel_thread+0xc/0x9c This can be easily triggered by ltp testcase syscalls/io_uring02 and it can also be easily fixed by clearing the FPU/SIMD thread info flags for kernel threads in copy_thread(). Cc: stable@vger.kernel.org Reported-by: Qi Hu <huqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
c56ab8e85d |
LoongArch: SMP: Change prefix from loongson3 to loongson
SMP operations can be shared by Loongson-2 series and Loongson-3 series, so we change the prefix from loongson3 to loongson for all functions and data structures. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
538eafc6de |
LoongArch: Combine acpi_boot_table_init() and acpi_boot_init()
Combine acpi_boot_table_init() and acpi_boot_init() since they are very simple, and we don't need to check the return value of acpi_boot_init(). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
83f638bca0 |
LoongArch: Makefile: Use "grep -E" instead of "egrep"
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E Fix this up by changing the LoongArch Makefile to use "grep -E" instead. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Jason A. Donenfeld
|
8032bf1233 |
treewide: use get_random_u32_below() instead of deprecated function
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Ard Biesheuvel
|
0efb61c89f |
efi/loongarch: Don't jump to kernel entry via the old image
Currently, the EFI entry code for LoongArch is set up to copy the executable image to the preferred offset, but instead of branching directly into that image, it branches to the local copy of kernel_entry, and relies on the logic in that function to switch to the link time address instead. This is a bit sloppy, and not something we can support once we merge the EFI decompressor with the EFI stub. So let's clean this up a bit, by adding a helper that computes the offset of kernel_entry from the start of the image, and simply adding the result to VMLINUX_LOAD_ADDRESS. And considering that we cannot execute from anywhere else anyway, let's avoid efi_relocate_kernel() and just allocate the pages instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
895bc3a135 |
efi: libstub: Factor out min alignment and preferred kernel load address
Factor out the expressions that describe the preferred placement of the loaded image as well as the minimum alignment so we can reuse them in the decompressor. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
732ea9db9d |
efi: libstub: Move screen_info handling to common code
Currently, arm64, RISC-V and LoongArch rely on the fact that struct screen_info can be accessed directly, due to the fact that the EFI stub and the core kernel are part of the same image. This will change after a future patch, so let's ensure that the screen_info handling is able to deal with this, by adopting the arm32 approach of passing it as a configuration table. While at it, switch to ACPI reclaim memory to hold the screen_info data, which is more appropriate for this kind of allocation. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |