IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On the Lenovo Yoga Tab 3 Pro YT3-X90F there are 2 issues with the backlight
on/off MIPI sequences:
1. The backlight on sequence has an I2C MIPI sequence element which uses
bus 0, but there is a bogus I2cSerialBus resource under the GPU in
the DSDT which causes i2c_acpi_find_adapter() to pick the wrong bus.
2. There is no backlight off sequence, causing the backlight to stay on.
Add a DMI quirk fixing both issues.
v2:
- Add Closes tag to gitlab issue with drm.debug=0xe, VBT info
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9380
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920195613.304091-4-hdegoede@redhat.com
On the Lenovo Yoga Tablet 2 830 / 1050 there are 2 problems:
1. The I2C MIPI sequence elements reference bus 3. ACPI has I2C1 - I2C7
which under Linux become bus 0 - 6. And the MIPI sequence reference
to bus 3 is indented for I2C3 which is bus 2 under Linux.
This leads to errors like these:
[ 178.244049] i2c_designware 80860F41:03: controller timed out
[ 178.245703] i915 0000:00:02.0: [drm] *ERROR* Failed to xfer payload of size (1) to reg (169)
There are 3 timeouts when the panel is on, delaying
waking up the screen on a key press by 3 seconds.
Note mipi_exec_i2c() cannot just subtract 1 from the bus
given in the I2C MIPI sequence element. Since on other
devices the I2C bus-numbers used in the MIPI sequences do
actually start at 0.
2. width_/height_mm contain a bogus 192mm x 120mm size. This is
especially a problem on the 8" 830 version which uses a 10:16
portrait screen where as the bogus size is 16:10.
Add a DMI quirk to override the I2C bus and the panel size with
the correct values.
Note both the 10" 1050 models as well as the 8" 830 models use the same
mainboard and thus the same DMI strings. The 10" 1050 uses a 1920x1200
landscape screen, where as the 8" 830 uses a 1200x1920 portrait screen,
so the quirk handling uses the display resolution to detect the model.
v2:
- Also override i2c_bus_num to fix mipi_exec_i2c() timeouts
v3:
- Add Closes tag to gitlab issue with drm.debug=0xe, VBT info
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9379
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920195613.304091-3-hdegoede@redhat.com
Vtotal is wrong in the BIOS supplied modeline for the DSI panel on
the Asus TF103C leading to the last line of the display being shown
as the first line.
Original: "1280x800": 60 67700 1280 1312 1328 1376 800 808 812 820 0x8 0xa
Fixed: "1280x800": 60 67700 1280 1312 1328 1376 800 808 812 816 0x8 0xa
The factory installed Android has a hardcoded modeline in its kernel,
causing it to not suffer from this BIOS bug;
and the Android boot-splash which uses the EFI FB which does have this bug
has the last line all black causing the bug to not be visible.
This commit introduces a generic DMI based quirk mechanism to vlv_dsi for
doing various fixups, and uses this to correct the modeline.
v2:
- s/mode_fixup/dmi_quirk/ to make the new DMI quirk mechanism more generic
- Add a comment with the old and new modelines to the patch and commit msg
v3:
- Add Closes tag to gitlab issue with drm.debug=0xe, VBT info
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9381
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920195613.304091-2-hdegoede@redhat.com
We enable a bunch more compiler warnings than the kernel
defaults. However, they've drifted to become a unique set of warnings,
and have increasingly fallen behind from the W=1 set.
Align with the W=1 warnings from scripts/Makefile.extrawarn for clarity,
by copy-pasting them with s/KBUILD_CFLAGS/subdir-ccflags-y/ to make it
easier to compare in the future.
Some of the -Wextra warnings do need to be disabled, just like in
Makefile.extrawarn, but take care to not disable them for W=2 or W=3
builds, depending on the warning.
v2: Add back some -Wextra warning disables (Nathan)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
[Final s/KBUILD_CFLAGS/subdir-ccflags-y/ fix while applying]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/69a812273091b6535ddc7f9346289d71bb30f43d.1697009258.git.jani.nikula@intel.com
The state checker overwrites the old crtc state with the
current hardware state. While that does save a kmalloc() it seems
rather dubious as there might still be something that we need
in the old crtc state.
Stop doing that and just allocate a temporary state for the state
checker. Should the extra malloc during the commit phase turn out
too annoying we could of course preallocate one for each crtc, but
let's proceed with the straightforward approch for now.
And while at it let's mark the new crtc state as const to make
sure the state checker doesn't mess it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The 16k max plane stride limit seems to be originally from
i965gm, and no explicit limit has been specified since (g4x+).
So let's assume the max plane stride itself is a suitable limit
also for the more recent FBC hardware.
In fact even for i965gm the max X-tiled stride is also 16k so
technically we don't need the check there either, but let's
keep it there anyway since it's explicitly mentioned in the
spec. Gen2/3 have more strict limits checked separately.
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003194256.28569-1-ville.syrjala@linux.intel.com
Current vga arbiter implementation in i915 needs a re-design.
The current approach would cause real problems if anyone actually
needs to talk another GPU using legacy VGA resources.
The main issue is that X becomes a slideshow if it thinks there
are multiple GPUs that have VGA decoding enabled as it insists
on adjusting the VGA routing pretty much for every little operation
involving any of the GPUs.
The cleanup will be planned for i915. Meanwhile to focus on Xe
upstreaming and have a cleaner separation, the said functionality
is being moved to a different file exclusive for i915. Xe driver
will re-use rest of the display code from i915.
v2: Addressed Jani Nikula's review comments.
v3: Dropped a duplicate function (Jani)
v4: Updated commit message with reasoning as sugested by Ville.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929074306.1533859-1-uma.shankar@intel.com
Atm the MST encoder config computation may use an out-of-date pbn_div
value, if the sink is unplugged and a sink is replugged with different
link rate/lane count capabilities. The current way of reinitializing
pbn_div depends on pbn_div getting cleared via intel_atomic_check() ->
drm_dp_mst_atomic_check() ->
drm_dp_mst_atomic_check_payload_alloc_limits(), however the clearing
won't happen if the sink got unplugged (and hence
drm_dp_mst_topology_mgr::mst_state being false).
To fix the above, simply update pbn_div unconditionally during config
computation, making pbn_div always match the link rate and lane count.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929154929.343947-1-imre.deak@intel.com
