IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Some third-party controllers can't report calibration data for the
gyro/accelerometer.
We can still use the gamepad as-is, so let's do that.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers can't report firmware/hardware version.
Unlike for the DualSense, the driver does not use these values for
anything in the DualShock 4 case, but merely exposes them via sysfs.
They will simply be 0x0.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There was no way to disable blinking once enabled.
Disable it on brightness = 0, as per the Linux LED spec.
The driver reports back the values it sends to the controller, but they
need to be scaled back to milliseconds. Setting the LED blinking via
sysfs works as expected now.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+55b
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for the following Bluetooth devices from Samsung: Samsung
wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal
Keyboard, HOGP Keyboard} (Sandeep C S)
- second version of code for applying proper quirk depending on
firmware version for lenovo/cptkbd (Mikhail Khvainitski)
- lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski)
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
- dead code and dead data structures removal (Jiri Slaby, Jiapeng
Chong)
* tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits)
HID: amd_sfh: Set the AMD SFH driver to depend on x86
HID: input: avoid polling stylus battery on Chromebook Pompom
HID: amd_sfh: Extend MP2 register access to SFH
HID: amd_sfh: Improve boot time when SFH is available
HID: amd_sfh: Avoid disabling the interrupt
HID: amd_sfh: Update HPD sensor structure elements
HID: amd_sfh: Increase sensor command timeout
HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
HID: nintendo: Remove some unused functions
HID: hid-prodikeys: remove struct pk_device
HID: hid-prodikeys: remove unused struct pcmidi_snd members
HID: hid-multitouch: remove unused mt_application::dev_time
HID: hid-lg3ff: remove unused struct lg3ff_device
HID: protect hid_device::bpf by CONFIG_HID_BPF
HID: wacom: remove unused hid_data::pressure
HID: apple: remove unused members from struct apple_sc_backlight
HID: wacom: Clean up use of struct->wacom_wac
HID: samsung: Add Samsung wireless bookcover and universal keyboard support
HID: samsung: Add Samsung wireless action mouse support
HID: samsung: Add Samsung wireless gamepad support
...
* New driver for GPIO based 7-segment LED display (Chris Packham)
* New driver for Maxim MAX6958/6959 I²C 7-segment LED display controller
* Refactor linedisp library to make the above happen
* Update Holtek HT16k33 driver to follow the linedisp refactoring
* Convert .remove to return void in platform drivers (Uwe Kleine-König)
* Fix DT schemas (Krzysztof Kozlowski)
* Refresh MAINTAINERS database
The following is an automated git shortlog grouped by driver:
Add 7-segment LED display drivers:
- Add 7-segment LED display driver
- Add driver for MAX695x 7-segment LED controllers
- Add 7 and 14 segment mappings to MAINTAINERS
cfag12864bfb:
- Convert to platform remove callback returning void
dt-bindings:
- auxdisplay: Add bindings for generic 7-segment LED
- auxdisplay: Add Maxim MAX6958/6959
- auxdisplay: hit,hd44780: use defines for GPIO flags
- auxdisplay: adjust example indentation and use generic node names
hd44780:
- Convert to platform remove callback returning void
ht16k33:
- Drop struct ht16k33_seg
- Switch to use line display character mapping
- Define a few helper macros
- Move ht16k33_linedisp_ops down
- Add default to switch-cases
img-ascii-lcd:
- Convert to platform remove callback returning void
- Make container_of() no-op for struct linedisp
linedisp:
- Allocate buffer for the string
- Add support for overriding character mapping
- Provide struct linedisp_ops for future extension
- Move exported symbols to a namespace
- Add missing header(s)
- Unshadow error codes in ->store()
- Use unique number for id
- Free allocated resources in ->release()
panel:
- Switch to use module_parport_driver()
seg-led-gpio:
- Import linedisp namespace
-----BEGIN PGP SIGNATURE-----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=Q7mz
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- New driver for GPIO based 7-segment LED display (Chris Packham)
- New driver for Maxim MAX6958/6959 I²C 7-segment LED display
controller
- Refactor linedisp library to make the above happen
- Update Holtek HT16k33 driver to follow the linedisp refactoring
- Convert .remove to return void in platform drivers (Uwe Kleine-König)
- Fix DT schemas (Krzysztof Kozlowski)
- Refresh MAINTAINERS database
* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
auxdisplay: hd44780: Convert to platform remove callback returning void
auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
auxdisplay: seg-led-gpio: Import linedisp namespace
dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
auxdisplay: Add 7-segment LED display driver
auxdisplay: Add driver for MAX695x 7-segment LED controllers
dt-bindings: auxdisplay: Add Maxim MAX6958/6959
auxdisplay: ht16k33: Drop struct ht16k33_seg
auxdisplay: ht16k33: Switch to use line display character mapping
auxdisplay: ht16k33: Define a few helper macros
auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
auxdisplay: ht16k33: Add default to switch-cases
auxdisplay: linedisp: Allocate buffer for the string
auxdisplay: linedisp: Add support for overriding character mapping
auxdisplay: linedisp: Provide struct linedisp_ops for future extension
auxdisplay: linedisp: Move exported symbols to a namespace
auxdisplay: linedisp: Add missing header(s)
auxdisplay: linedisp: Unshadow error codes in ->store()
auxdisplay: linedisp: Use unique number for id
...
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support
-----BEGIN PGP SIGNATURE-----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=WLj9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmXx5kwACgkQnJ2qBz9k
QNmZowf/UlGJ1rmQFFhoodn3SyK48tQjOZ23Ygx6v9FZiLMuQ3b1k0kWKmwM4lZb
mtRriCm+lPO9Yp/Sflz+jn8S51b/2bcTXiPV4w2Y4ZIun41wwggV7rWPnTCHhu94
rGEPu/SNSBdpxWGv43BKHSDl4XolsGbyusQKBbKZtftnrpIf0y2OnyEXSV91Vnlh
KM/XxzacBD4/3r4KCljyEkORWlIIn2+gdZf58sKtxLKvnfCIxjB+BF1e0gOWgmNQ
e/pVnzbAHO3wuavRlwnrtA+ekBYQiJq7T61yyYI8zpeSoLHmwvPoKSsZP+q4BTvV
yrcVCbGp3uZlXHD93U3BOfdqS0xBmg==
=84Q4
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, isofs, udf, and quota updates from Jan Kara:
"A lot of material this time:
- removal of a lot of GFP_NOFS usage from ext2, udf, quota (either it
was legacy or replaced with scoped memalloc_nofs_*() API)
- removal of BUG_ONs in quota code
- conversion of UDF to the new mount API
- tightening quota on disk format verification
- fix some potentially unsafe use of RCU pointers in quota code and
annotate everything properly to make sparse happy
- a few other small quota, ext2, udf, and isofs fixes"
* tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (26 commits)
udf: remove SLAB_MEM_SPREAD flag usage
quota: remove SLAB_MEM_SPREAD flag usage
isofs: remove SLAB_MEM_SPREAD flag usage
ext2: remove SLAB_MEM_SPREAD flag usage
ext2: mark as deprecated
udf: convert to new mount API
udf: convert novrs to an option flag
MAINTAINERS: add missing git address for ext2 entry
quota: Detect loops in quota tree
quota: Properly annotate i_dquot arrays with __rcu
quota: Fix rcu annotations of inode dquot pointers
isofs: handle CDs with bad root inode but good Joliet root directory
udf: Avoid invalid LVID used on mount
quota: Fix potential NULL pointer dereference
quota: Drop GFP_NOFS instances under dquot->dq_lock and dqio_sem
quota: Set nofs allocation context when acquiring dqio_sem
ext2: Remove GFP_NOFS use in ext2_xattr_cache_insert()
ext2: Drop GFP_NOFS use in ext2_get_blocks()
ext2: Drop GFP_NOFS allocation from ext2_init_block_alloc_info()
udf: Remove GFP_NOFS allocation in udf_expand_file_adinicb()
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmXx5UkACgkQnJ2qBz9k
QNmq5gf+Nm5PB2EQKt3xDqfdK8huTyTPH418tHHMcUjVeWIeFviFMXb2FeuJArr4
TWYjrRzs8aC75SYpPk1LZ6+6OymqYqV+0fxI91BkNnvNpwCInG6h8x6AlG28RLi+
/vmat7qHTPhJ+iTWGU4W3aDXINdXUq1KcN7+8aNDeKy80eI+UhJaWePNe+IFsovX
hSDzl6P8FbGqX8s/v52FsUJCXqHHcJYkiyQyUninY0yA/WNPVnzyK+RngP5p216d
/Kdh11jbduu+xRObn+CTgsASRANqazQi7rddSVTFefUie2s7vUD7wcyzEHTPY5QS
BEQypvCmOFNPFKmMy+e8iLXtYRgTeg==
=kQX5
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fsnotify optimizations to reduce cost of fsnotify when nobody is
watching
- fix longstanding wart that system could not be suspended when some
process was waiting for response to fanotify permission event
- some spelling fixes
* tag 'fsnotify_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: allow freeze when waiting response for permission events
fanotify: Fix misspelling of "writable"
fsnotify: Fix misspelling of "writable"
inotify: Fix misspelling of "writable"
fsnotify: Add fsnotify_sb_has_watchers() helper
fsnotify: optimize the case of no parent watcher
* Online Repair;
** New ondisk structures being repaired.
- Inode's mode field by trying to obtain file type value from the a
directory entry.
- Quota counters.
- Link counts of inodes.
- FS summary counters.
- rmap btrees.
Support for in-memory btrees has been added to support repair of rmap
btrees.
** Misc changes
- Report corruption of metadata to the health tracking subsystem.
- Enable indirect health reporting when resources are scarce.
- Reduce memory usage while reparing refcount btree.
- Extend "Bmap update" intent item to support atomic extent swapping on
the realtime device.
- Extend "Bmap update" intent item to support extended attribute fork and
unwritten extents.
** Code cleanups
- Bmap log intent.
- Btree block pointer checking.
- Btree readahead.
- Buffer target.
- Symbolic link code.
* Remove mrlock wrapper around the rwsem.
* Convert all the GFP_NOFS flag usages to use the scoped
memalloc_nofs_save() API instead of direct calls with the GFP_NOFS.
* Refactor and simplify xfile abstraction. Lower level APIs in
shmem.c are required to be exported in order to achieve this.
* Skip checking alignment constraints for inode chunk allocations when block
size is larger than inode chunk size.
* Do not submit delwri buffers collected during log recovery when an error
has been encountered.
* Fix SEEK_HOLE/DATA for file regions which have active COW extents.
* Fix lock order inversion when executing error handling path during
shrinking a filesystem.
* Remove duplicate ifdefs.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZemMkgAKCRAH7y4RirJu
9ON5AP0Vda6sMn/ZUYoLo9ZUrUvlUb8L0dhEN5JL0XfyWW5ogAD/bH4G6pKSNyTw
cSEjryuDakirdHLt5g0c+QHd2a/fzw0=
=ymKk
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
- Online repair updates:
- More ondisk structures being repaired:
- Inode's mode field by trying to obtain file type value from
the a directory entry
- Quota counters
- Link counts of inodes
- FS summary counters
- Support for in-memory btrees has been added to support repair
of rmap btrees
- Misc changes:
- Report corruption of metadata to the health tracking subsystem
- Enable indirect health reporting when resources are scarce
- Reduce memory usage while repairing refcount btree
- Extend "Bmap update" intent item to support atomic extent
swapping on the realtime device
- Extend "Bmap update" intent item to support extended attribute
fork and unwritten extents
- Code cleanups:
- Bmap log intent
- Btree block pointer checking
- Btree readahead
- Buffer target
- Symbolic link code
- Remove mrlock wrapper around the rwsem
- Convert all the GFP_NOFS flag usages to use the scoped
memalloc_nofs_save() API instead of direct calls with the GFP_NOFS
- Refactor and simplify xfile abstraction. Lower level APIs in shmem.c
are required to be exported in order to achieve this
- Skip checking alignment constraints for inode chunk allocations when
block size is larger than inode chunk size
- Do not submit delwri buffers collected during log recovery when an
error has been encountered
- Fix SEEK_HOLE/DATA for file regions which have active COW extents
- Fix lock order inversion when executing error handling path during
shrinking a filesystem
- Remove duplicate ifdefs
* tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits)
xfs: shrink failure needs to hold AGI buffer
mm/shmem.c: Use new form of *@param in kernel-doc
kernel-doc: Add unary operator * to $type_param_ref
xfs: use kvfree() in xlog_cil_free_logvec()
xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL
xfs: fix scrub stats file permissions
xfs: fix log recovery erroring out on refcount recovery failure
xfs: move symlink target write function to libxfs
xfs: move remote symlink target read function to libxfs
xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
xfs: xfs_bmap_finish_one should map unwritten extents properly
xfs: support deferred bmap updates on the attr fork
xfs: support recovering bmap intent items targetting realtime extents
xfs: add a realtime flag to the bmap update log redo items
xfs: add a xattr_entry helper
xfs: fix xfs_bunmapi to allow unmapping of partial rt extents
xfs: move xfs_bmap_defer_add to xfs_bmap_item.c
xfs: reuse xfs_bmap_update_cancel_item
xfs: add a bi_entry helper
xfs: remove xfs_trans_set_bmap_flags
...
-----BEGIN PGP SIGNATURE-----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=+IA7
-----END PGP SIGNATURE-----
Merge tag '6.9-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- fix for folios/netfs data corruption in cifs_extend_writeback
- additional tracepoint added
- updates for special files and symlinks: improvements to allow
selecting use of either WSL or NFS reparse point format on creating
special files
- allocation size improvement for cached files
- minor cleanup patches
- fix to allow changing the password on remount when password for the
session is expired.
- lease key related fixes: caching hardlinked files, deletes of
deferred close files, and an important fix to better reuse lease keys
for compound operations, which also can avoid lease break timeouts
when low on credits
- fix potential data corruption with write/readdir races
- compression cleanups and a fix for compression headers
* tag '6.9-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
cifs: update internal module version number for cifs.ko
smb: common: simplify compression headers
smb: common: fix fields sizes in compression_pattern_payload_v1
smb: client: negotiate compression algorithms
smb3: add dynamic trace point for ioctls
cifs: Fix writeback data corruption
smb: client: return reparse type in /proc/mounts
smb: client: set correct d_type for reparse DFS/DFSR and mount point
smb: client: parse uid, gid, mode and dev from WSL reparse points
smb: client: introduce SMB2_OP_QUERY_WSL_EA
smb: client: Fix a NULL vs IS_ERR() check in wsl_set_xattrs()
smb: client: add support for WSL reparse points
smb: client: reduce number of parameters in smb2_compound_op()
smb: client: fix potential broken compound request
smb: client: move most of reparse point handling code to common file
smb: client: introduce reparse mount option
smb: client: retry compound request without reusing lease
smb: client: do not defer close open handles to deleted files
smb: client: reuse file lease key in compound operations
smb3: update allocation size more accurately on write completion
...
As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.
For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.
If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.
Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.
Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.
Tested on both 32 and 64bit including error injection.
Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe Leroy did most of the work on this release, first with a few
cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error handling for
when set_memory_XX() can fail. This is part of a larger effort to clean
up all these callers which can fail, modules is just part of it.
This has been sitting on linux-next for about a month without issues.
-----BEGIN PGP SIGNATURE-----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=Z9SO
-----END PGP SIGNATURE-----
Merge tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZe9ZfQAKCRAwbglWLn0t
XKA3AQCLEZB8cFifk0pIItUCbSLfplJsS926AgknvwLYSRn8WAEA/WHZ+42TTiPy
w2U8zmhaqzmqWtwrwjjMUmoap90KYwA=
=4NVe
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
virt: efi_secret: Convert to platform remove callback returning void
x86/efistub: Remap kernel text read-only before dropping NX attribute
efi/libstub: Add get_event_log() support for CC platforms
efi/libstub: Measure into CC protocol if TCG2 protocol is absent
efi/libstub: Add Confidential Computing (CC) measurement typedefs
efi/tpm: Use symbolic GUID name from spec for final events table
efi/libstub: Use TPM event typedefs from the TCG PC Client spec
This is my pull request for Linux v6.9. Contains small scope bug fixes
and device tree updates. No new features.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZe+gDBIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JyzwD7B+kWBSArbN/zG+9AnsvlauMt10euyOma
Al42W6JZjbwBAKLbiVJOirULZNprSbuDgZQOZC6izAzHHx/RPQKbkFQB
=zJ1F
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Small bug fixes and device tree updates. No new features"
* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis_i2c: Add compatible string nuvoton,npct75x
tpm_tis: Add compatible string atmel,at97sc3204
tpm_tis_spi: Add compatible string atmel,attpm20p
dt-bindings: tpm: Add compatible string atmel,attpm20p
tpm,tpm_tis: Avoid warning splat at shutdown
tpm/tpm_ftpm_tee: fix all kernel-doc warnings
misc: I will be signing-off from my personal gmail id from now on.
-----BEGIN PGP SIGNATURE-----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=+39i
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki).
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor).
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki).
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi).
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki).
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas
Pandruvada).
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvJ0oSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx63MQAIAzLFMzDqbG5bFq096tREuwtYhkQMq/
n3ZW+FhMfSr5MnGiTCelk/6auYvijMweylxrnfQM8ilIrSWVc2fNks6PTjI/hTe6
OUfF+nEAu+fv6I68p3evlI+IL7cncU1kygYhDRr6yxh5AFDn/BED/Klv8Ms0CkOi
YVk6+ZCsvkcC74Tvjm9+wDJZ7XHBqKXsYCyBKqxSBmMePc0FOqDGgji2d6Q8O9Ka
uITT9W4IhF9GNEV/ujUIrHVbfkUqJHn1sfJTOynG1Zp/MopA8mXAB2fWvkl4Kfd9
UvgHXZnBM4jFONlqHNlaV9mTiigMaKsgU1wfaSj7fgj8DELWGII0MQfC9kcUgvlJ
+qqmZ52tc8DKU3Lj6Wg58wgMTrI4XVAJjXwg9CTo65y6KyMuT1dkypnH95TdVtWl
qZJ9WdxAmAbCJqZzj10kn44HrF565/t0hShrjKvv+inzDyZ5jXMttK3TQS20REsC
MzoIxahlSUkN32OjiKhebrTNShzqFM6dxTDJLktMiInpgnnZJ/VG4Bao+NkSlLIJ
ZwTV1xOqZZarkPVMlrOijE1bs6HbomZ7ZEsDSxvtwp+MZ06G4ICY11/KbTw9IZFv
lCZiFNEzzxzrgqcz+5gS9y8/alknqiU5DSKCxfhbnNTW+Tk09mYPK5N0umUGwaTA
gQ4fWsBoTpZF
=Is/Y
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki).
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki).
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki).
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu).
- Constify acpi_bus_type (Ricardo Marliere).
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki).
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye).
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf).
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus).
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King).
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede).
- Make the ACPI backlight code handle fetching EDID that is longer than
256 bytes (Mario Limonciello).
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik).
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König).
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki).
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath).
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White).
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan).
-----BEGIN PGP SIGNATURE-----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=Yngi
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These modify the ACPI device events and processor enumeration code to
take the 'enabled' _STA bit into account as mandated by the ACPI
specification, convert several platform drivers to using a remove
callback that returns void, add some new quirks for ACPI IRQ override
and other things, address assorted issues and clean up code.
Specifics:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki)
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki)
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki)
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu)
- Constify acpi_bus_type (Ricardo Marliere)
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye)
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King)
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede)
- Make the ACPI backlight code handle fetching EDID that is longer
than 256 bytes (Mario Limonciello)
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik)
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König)
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki)
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath)
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White)
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan)"
* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: CPPC: Use access_width over bit_width for system memory accesses
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: APEI: GHES: Convert to platform remove callback returning void
ACPI: property: Polish ignoring bad data nodes
ACPI: thermal_lib: Initialize temp_decik to zero
...
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO, PMA8084
and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions
-----BEGIN PGP SIGNATURE-----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=KslH
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
* New drivers for
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
* Additional chip support in existing drivers
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
* Devicetree bindings updates
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
* Other improvements
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault attributes
to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers
-----BEGIN PGP SIGNATURE-----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=BTB3
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to GPIO device
structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being unbound while
the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the information we need
can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to struct
gpio_device to further reduce the need to dereference the former
- pass the GPIO device struct instead of the GPIO chip to sysfs callback to,
again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for the same
reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones that are
requested
- remove leftover typedefs
- pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for
improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by users as
we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO subsystem
- set the device type (assign the relevant struct device_type) for GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it in
menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of hard-coding
it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add lockdep asserts
to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest replacements
Other:
- remove an obsolete test from selftests
-----BEGIN PGP SIGNATURE-----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=LX+L
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The biggest feature is the locking overhaul. Up until now the
synchronization in the GPIO subsystem was broken. There was a single
spinlock "protecting" multiple data structures but doing it wrong (as
evidenced by several places where it would be released when a sleeping
function was called and then reacquired without checking the protected
state).
We tried to use an RW semaphore before but the main issue with GPIO is
that we have drivers implementing the interfaces in both sleeping and
non-sleeping ways as well as user-facing interfaces that can be called
both from process as well as atomic contexts. Both ends converge in
the same code paths that can use neither spinlocks nor mutexes. The
only reasonable way out is to use SRCU and go mostly lockless. To that
end: we add several SRCU structs in relevant places and use them to
assure consistency between API calls together with atomic reads and
writes of GPIO descriptor flags where it makes sense.
This code has spent several weeks in next and has received several
fixes in the first week or two after which it stabilized nicely. The
GPIO subsystem is now resilient to providers being suddenly unbound.
We managed to also remove the existing character device RW semaphore
and the obsolete global spinlock.
Other than the locking rework we have one new driver (for Chromebook
EC), much appreciated documentation improvements from Kent and the
regular driver improvements, DT-bindings updates and GPIOLIB core
tweaks.
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to
GPIO device structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being
unbound while the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the
information we need can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to
struct gpio_device to further reduce the need to dereference the
former
- pass the GPIO device struct instead of the GPIO chip to sysfs
callback to, again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for
the same reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones
that are requested
- remove leftover typedefs
- pass the consumer device to GPIO core in
devm_fwnode_gpiod_get_index() for improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by
users as we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO
subsystem
- set the device type (assign the relevant struct device_type) for
GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it
in menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of
hard-coding it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add
lockdep asserts to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest
replacements
Other:
- remove an obsolete test from selftests"
* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: sysfs: repair export returning -EPERM on 1st attempt
selftest: gpio: remove obsolete gpio-mockup test
gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
gpio: of: Make of_gpio_get_count() take firmware node as a parameter
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
gpio: sim: use for_each_hwgpio()
gpio: provide for_each_hwgpio()
gpio: don't warn about removing GPIO chips with active users anymore
gpio: sim: delimit the fwnode name with a ":" when generating labels
gpio: sim: add lockdep asserts
gpio: Add ChromeOS EC GPIO driver
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
gpio: fix memory leak in gpiod_request_commit()
gpio: constify opaque pointer "data" in gpio_device_find()
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
gpio: uapi: clarify default_values being logical
gpio: sysfs: fix inverted pointer logic
gpio: don't let lockdep complain about inherently dangerous RCU usage
...
This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used in
future to allow controllers to directly trigger SPI operations (eg, from
interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages.
- A big set of updates from Uwe Kleine-König moving drivers to use APIs
with more modern terminology for controllers.
- Major overhaul of the s3c64xx driver.
- Support for Google GS101 and Samsung Exynos850.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U
h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt
mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2
8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj
kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0
QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/
yqcpbCUwZ1AETXHcmly7YwNpPV9LBg==
=+Xw/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
This has been a very quiet release, mostly cleanups, API updates and
simple device additions. I messed up slightly and there are a couple of
duplicated commits resulting from me leaving things in my inbox which
didn't seem worth removing by the time I noticed them.
- Conversion of several drivers to GPIO descriptors.
- Build out the features of of the MP8859 driver.
- Support for Qualcomm PM4125 and PM6150.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvFPUACgkQJNaLcl1U
h9C11wf+LkEBZ/oaidhjWlDdnd6oVHCVG7du5YXRSDcobm9dqigfnhRPvcF3WqlQ
DfPBq5/VN/yCAxD3tsUS+bhPfCEMfSnEHN4uaYy7NjLulW3zh++Dxib3FPD7HURY
aw5u8gm4AuB+x4nJOtrA6tiBisfHyCM7uSIfnUcs0LVlksCibdOe0OfHVsO2BNW+
gbLxZc8gr5VdORfHqb6oeUtcoiA/2gALNvdagMooguzolDtVEs1yLQkbD4CCOGHg
EPqE7YxdJrTOtbd7hiR5z2G8plPqmsbCG//Jb9jJuEAtefm57pyJ5SfMBGKs0hS9
p/o5Vk4ygghArRnl0KsItgphFCZt0A==
=GuVG
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, mostly cleanups, API updates and
simple device additions. I messed up slightly and there are a couple
of duplicated commits resulting from me leaving things in my inbox
which didn't seem worth removing by the time I noticed them.
- Conversion of several drivers to GPIO descriptors
- Build out the features of of the MP8859 driver
- Support for Qualcomm PM4125 and PM6150"
* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
regulator: core: make regulator_class constant
regulator: da9121: Remove unused of_gpio.h
regulator: userspace-consumer: add module device table
regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
regulator: mp8859: Implement set_current_limit()
regulator: mp8859: Report slew rate
regulator: mp8859: Support status and error readback
regulator: mp8859: Support active discharge control
regulator: mp8859: Support mode operations
regulator: mp8859: Support enable control
regulator: mp8859: Validate and log device identifier information
regulator: mp8859: Specify register accessibility and enable caching
regulator: max8998: Convert to GPIO descriptors
regulator: max8997: Convert to GPIO descriptors
regulator: lp8788-buck: Fully convert to GPIO descriptors
regulator: da9055: Fully convert to GPIO descriptors
regulator: max8973: Finalize switch to GPIO descriptors
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
...
Just two updates this time around, a rework of max_register handling
which enables us to support devices with only one register better and a
new test which will be used to validate use of some new SPI
optimisations which will be coming in during this merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE9UACgkQJNaLcl1U
h9DNtgf/UQGqI/+Kph8HZ1JIItK/ehOxXB2Mdri696TzgJ0rXHJQhfIKkU4I4rBv
E090LWqJ0GazdpAEOFmf0YTBVBlCKjzb0IWtaNUz+/6/X27xrzw5ZuGfRj+gdQWo
AJNfrtDw73rpgypEg3hCxQvBGFoT6uQvfqwzEiCBDv98Tlin6L9ZJ1tInCv6B6Bo
I0DS6zvWx8E99NXG847Q3lVVRCaHY7xamrF1BURt1N0D97SkR41HmEaBkDalME8g
lqxVB1YKsT6GwYYKmevDEoMMFg6CHTXCegl1zTmPjR4GGEih0M6j1VD6DFPCeCMr
XnkQAj4lY2XUksYi5fPhhy5x1aT6Ww==
=kW6Y
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Just two updates this time around, a rework of max_register handling
which enables us to support devices with only one register better and
a new test which will be used to validate use of some new SPI
optimisations which will be coming in during this merge window"
* tag 'regmap-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add a test for ranges in combination with windows
regmap: rework ->max_register handling
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()
-----BEGIN PGP SIGNATURE-----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=ME/e
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()"
* tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits)
mmc: core: make mmc_host_class constant
mmc: core: Fix switch on gp3 partition
mmc: tmio: comment the ERR_PTR usage in this driver
mmc: mmc_spi: Don't mention DMA direction
mmc: dw_mmc: Remove unused of_gpio.h
mmc: dw_mmc: add support for hi3798mv200
dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS()
mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
mmc: tmio: avoid concurrent runs of mmc_request_done()
dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
mmc: sh_mmcif: Advance sg_miter before reading blocks
mmc: sh_mmcif: sg_miter must not be atomic
mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic
dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
mmc: core: constify the struct device_type usage
mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
...
This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And sorry
for those who still need some patience because I didn't manage to empty
my review queue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmXuyf4ACgkQj4D7WH0S
/k4Yugf+P7gMPuCQJqWLvOyuHjKt4tI3aVsr+jbSiAfbPWaXAQKZunnZ9K17bOI2
JQkDuAi76teNRiVtNEx1ZEdfKe9KgY/Npq8BTmvXxvBktCand8sfhyyRaXYo9FWI
B5qKdp1WIg7ZDMoGQtLRayly4FAsbB0L50SjWmkVIXC2xXp6t6KxxgnOgTM58Oo9
0yYYetF3EOmDQ4J234/muaLbM+1rjajKdw+SgS2mry2WV60SOqo+PQfuK42XjWip
cLDkEgYogwx1MAbFgobtquA7Hvkdb2WyCirTDNZiGIBtmM89kH4Oa8e4IDR6FRqn
w35hJv7sxVjiqBrSMD/lWpJeQ8gPYg==
=6Ixv
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
* Improvements
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents.
* Misc
- Make bus_type const.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZe5rkxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz09TIBAPceKZPzZbShXTkiJAEOVi++rxVppFuB
0BV2NqS6b+pBAPwItU5OiQaSUg6PsJNHAHHiJSi6jQ4w7tAdkpfOBlW1Cg==
=5dkP
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents
- Make bus_type const
* tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Replace tag with id table in driver struct
firmware: coreboot: Generate aliases for coreboot modules
firmware: coreboot: Generate modalias uevent for devices
firmware: coreboot: make coreboot_bus_type const
deduplication, compression, and thin provisioning. Please see both:
Documentation/admin-guide/device-mapper/vdo.rst and
Documentation/admin-guide/device-mapper/vdo-design.rst
- The DM vdo target handles its concurrency by pinning an IO, and
subsequent stages of handling that IO, to a particular VDO thread.
This aspect of VDO is "unique" but its overall implementation is
very tightly coupled to its mostly lockless threading model.
As such, VDO is not easily changed to use more traditional
finer-grained locking and Linux workqueues. Please see the "Zones
and Threading" section of vdo-design.rst
- The DM vdo target has been used in production for many years but has
seen significant changes over the past ~6 years to prepare it for
upstream inclusion. The codebase is still large but it is isolated
to drivers/md/dm-vdo/ and has been made considerably more
approachable and maintainable.
- Matt Sakai has been added to the MAINTAINERS file to reflect that he
will send VDO changes upstream through the DM subsystem maintainers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXqYlEACgkQxSPxCi2d
A1oOAggAlPdoDfU2DWoFxJcCGR4sYrk6n8GOGXZIi5bZeJFaPUoH9EQZUVgsMiEo
TSpJugk6KddsXNsKHCuc3ctejNT4FAs3f5pcqWQ+VTR6xXD7xw67hN78arhu4VZH
OWzAyKu8fs4NUxjMThLdwMlt2+vOfcuOHAXxcil3kvG6SPcPw1FDde3Jbb5OmgcF
z1D9kkUuqH+d46P/dwOsNcr7cMIUviZW+plFnVMKsdJGH/SCyu6TCLYWrwBR1VXW
pNylxk4AcsffQdu2Oor6+0ALaH7Wq3kjymNLQlYWt0EibGbBakrVs1A/DIXUZDiX
gYfcemQpl74x1vifNtIsUWW9vO1XPg==
=2Oof
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-vdo' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper VDO target from Mike Snitzer:
"Introduce the DM vdo target which provides block-level deduplication,
compression, and thin provisioning. Please see:
Documentation/admin-guide/device-mapper/vdo.rst
Documentation/admin-guide/device-mapper/vdo-design.rst
The DM vdo target handles its concurrency by pinning an IO, and
subsequent stages of handling that IO, to a particular VDO thread.
This aspect of VDO is "unique" but its overall implementation is very
tightly coupled to its mostly lockless threading model. As such, VDO
is not easily changed to use more traditional finer-grained locking
and Linux workqueues. Please see the "Zones and Threading" section of
vdo-design.rst
The DM vdo target has been used in production for many years but has
seen significant changes over the past ~6 years to prepare it for
upstream inclusion. The codebase is still large but it is isolated to
drivers/md/dm-vdo/ and has been made considerably more approachable
and maintainable.
Matt Sakai has been added to the MAINTAINERS file to reflect that he
will send VDO changes upstream through the DM subsystem maintainers"
* tag 'for-6.9/dm-vdo' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (142 commits)
dm vdo: document minimum metadata size requirements
dm vdo: remove meaningless version number constant
dm vdo: remove vdo_perform_once
dm vdo block-map: Remove stray semicolon
dm vdo string-utils: change from uds_ to vdo_ namespace
dm vdo logger: change from uds_ to vdo_ namespace
dm vdo funnel-queue: change from uds_ to vdo_ namespace
dm vdo indexer: fix use after free
dm vdo logger: remove log level to string conversion code
dm vdo: document log_level parameter
dm vdo: add 'log_level' module parameter
dm vdo: remove all sysfs interfaces
dm vdo target: eliminate inappropriate uses of UDS_SUCCESS
dm vdo indexer: update ASSERT and ASSERT_LOG_ONLY usage
dm vdo encodings: update some stale comments
dm vdo permassert: audit all of ASSERT to test for VDO_SUCCESS
dm-vdo funnel-workqueue: return VDO_SUCCESS from make_simple_work_queue
dm vdo thread-utils: return VDO_SUCCESS on vdo_create_thread success
dm vdo int-map: return VDO_SUCCESS on success
dm vdo: check for VDO_SUCCESS return value from memory-alloc functions
...
using BH workqueues. These changes were coordinated with Tejun and
are based ontop of DM's 6.9 changes and Tejun's 6.9 workqueue tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXqBRAACgkQxSPxCi2d
A1pAIAf+PKFi4KlNvJlJehKzCMBxofFUK+DMxePqbhHudN1v6z2Q0lMbsa0wpCly
eql2SQQPRhqI4j7WhhpY6uXPpxZ9TKrDsIFiOTka6kZBwIlVafMDwtb+16/PVSHa
le7ngtCaY4EFu0aPpVV8oW5TGJSgmGsv+KvgZ/Op+ugmbOKAraMvVaGb89xh6WQN
ngUoLqEgF0br79UWKYJ2YtjsgK1h2Ra+Nu8eh/FV3dAOtnJtNJ5Ph0MLz35dGQvv
0djeDy/DGmWKeNxUdqQPzgguPG84P5Pfg6xbZa7bqqv4ujQOp2YIX4dxkjM2w2Aj
III+WJ5XHaLOE1JutwZCVyuabNApMA==
=MSmO
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-bh-wq' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper BH workqueue conversion from Mike Snitzer:
"Convert the DM verity and crypt targets from (ab)using tasklets to
using BH workqueues.
These changes were coordinated with Tejun and are based ontop of DM's
6.9 changes and Tejun's 6.9 workqueue tree"
* tag 'for-6.9/dm-bh-wq' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: Convert from tasklet to BH workqueue
dm-crypt: Convert from tasklet to BH workqueue
that a bio's IO priority is propagated. Work focused on enabling
both DM crypt and verity targets to retain the appropriate IO
priority.
- Fix DM raid reshape logic to not allow an empty flush bio to be
requeued due to false concern about the bio, which doesn't have a
data payload, accessing beyond the end of the device.
- Fix DM core's internal resume so that it properly calls both presume
and resume methods, which fixes the potential for a postsuspend and
resume imbalance.
- Update DM verity target to set DM_TARGET_SINGLETON flag because it
doesn't make sense to have a DM table with a mix of targets that
include dm-verity.
- Small cleanups in DM crypt, thin, and integrity targets.
- Fix references to dm-devel mailing list to use latest list address.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXwWHkACgkQxSPxCi2d
A1oavggAtmftaoAXUJNdiYgIDm6/gKPa0CDyQEoD5cTyQ32R7c6SYNN7u2wrltHX
af36lzoksfsOra8uMa4+Q46/XFeqlRzvfu29bhmfAWMkMT3MMq7iGtTFG/SluD7b
NWjXhsUT8Fv2Q7BKglUc6cXUIbCZNwNUs5cxx2QobdrD57qxVKDz5HkH5/EggptA
cA6dpD7DbpWQhHWm0UN6cOmYNh4kGLiQs4S50N5hc7zlbXfJhhVzflecsVPY+MVN
wS/iv/hNenlLuJ7gzIPBwmxRgBbjHHbrbFNVa2yFrPQ8m/AuRbAUqYQO1sOXNOMZ
Mkk2G0IB7sJtpnEm+6l0x7A4VmSWvg==
=Eoxd
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's IO submission (which include dm-io and dm-bufio) such
that a bio's IO priority is propagated. Work focused on enabling both
DM crypt and verity targets to retain the appropriate IO priority
- Fix DM raid reshape logic to not allow an empty flush bio to be
requeued due to false concern about the bio, which doesn't have a
data payload, accessing beyond the end of the device
- Fix DM core's internal resume so that it properly calls both presume
and resume methods, which fixes the potential for a postsuspend and
resume imbalance
- Update DM verity target to set DM_TARGET_SINGLETON flag because it
doesn't make sense to have a DM table with a mix of targets that
include dm-verity
- Small cleanups in DM crypt, thin, and integrity targets
- Fix references to dm-devel mailing list to use latest list address
* tag 'for-6.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: call the resume method on internal suspend
dm raid: fix false positive for requeue needed during reshape
dm-integrity: set max_integrity_segments in dm_integrity_io_hints
dm: update relevant MODULE_AUTHOR entries to latest dm-devel mailing list
dm ioctl: update DM_DRIVER_EMAIL to new dm-devel mailing list
dm verity: set DM_TARGET_SINGLETON feature flag
dm crypt: Fix IO priority lost when queuing write bios
dm verity: Fix IO priority lost when reading FEC and hash
dm bufio: Support IO priority
dm io: Support IO priority
dm crypt: remove redundant state settings after waking up
dm thin: add braces around conditional code that spans lines
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled. (from me)
- Drop the board type board_ahci_low_power. Now when we make sure that we
won't enable LPM for external ports, we can always set the LPM policy to
CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is thus no
longer any need for the board type board_ahci_low_power, so it can be
removed. (As before, LPM features not supported by the HBA and/or the
device will not be enabled, regardless of the LPM policy Kconfig.)
(from Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we will
wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel platforms
use it. The Intel PCS quirk was being applied to basically all Intel
platforms, which caused some issues (the device failing to come back
after a reset), when being applied to newer Intel platforms where it
shouldn't have been applied. Add board type board_ahci_pcs_quirk and
make legacy Intel platforms use it. New platforms can be added using
board type board_ahci (which will not have the quirk applied).
(from me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more clearly
highlight that it applies two different quirks. (from me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk). (from me)
- Drop unused board_ahci_noncq board type. (from me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types. (from me)
- Make pata_parport_bus_type const. (from Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not used
by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema.
(from Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing the
maximum number of ports supported by the HBA silicon. (from me)
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZe70AhIcY2Fzc2VsQGtl
cm5lbC5vcmcACgkQyWQxo5nGTXJfQQD/TjC4nEAWRiV3qz0iqyXt89T7DZUGP7aP
AZDxv2ST0rAA/j2VK6G1VHoxxN3fghfCF+D8zCzZ8w/gsOqjKMvbIEoI
=sNec
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
Including:
- Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
- Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
- ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
- AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
- Some smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmXuyf8ACgkQK/BELZcB
GuNXwxAApkjDm7VWM2D2K8Y+8YLbtaljMCCudNZKhgT++HEo4YlXcA5NmOddMIFc
qhF9EwAWlQfj3krJLJQSZ6v/joKpXSwS6LDYuEGmJ/pIGfN5HqaTsOCItriP7Mle
ZgRTI28u5ykZt4b6IKG8QeexilQi2DsIxT46HFiHL0GrvcBcdxDuKnE22PNCTwU2
25WyJzgo//Ht2BrwlhrduZVQUh0KzXYuV5lErvoobmT0v/a4llS20ov+IE/ut54w
FxIqGR8rMdJ9D2dM0bWRkdJY/vJxokah2QHm0gcna3Gr2iENL2xWFUtm+j1B6Smb
VuxbwMkB0Iz530eShebmzQ07e2f1rRb4DySriu4m/jb8we20AYqKMYaxQxZkU68T
1hExo+/QJQil9p1t+7Eur+S1u6gRHOdqfBnCzGOth/zzY1lbEzpdp8b9M8wnGa4K
Y0EDeUpKtVIP1ZRCBi8CGyU1jgJF13Nx7MnOalgGWjDysB5RPamnrhz71EuD6rLw
Jxp2EYo8NQPmPbEcl9NDS+oOn5Fz5TyPiMF2GUzhb9KisLxUjriLoTaNyBsdFkds
2q+x6KY8qPGk37NhN0ktfpk9CtSGN47Pm8ZznEkFt9AR96GJDX+3NhUNAwEKslwt
1tavDmmdOclOfIpWtaMlKQTHGhuSBZo1A40ATeM/MjHQ8rEtwXk=
=HV07
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmXwUvcACgkQUqAMR0iA
lPKSEw/+NZ7MY1NlKs3+j61L3Bh6zIXJcuHJc1Zt4EPkf5N/OyJZxSYXpaFFxDEB
at+1vcyU9Xq096rsgfxkU8tkIGOpOgLICgyzyF8ZvBNMsVdd+V0gb6PoIuVx2aWj
wiYOZ6L8XuIGZ4BN3svk10a6Z/Fvk+HNjyuy+X+kqss5NX4hMNKK01FJyMllidC1
4aryDPo3fKRpHBSi2YMO4NXLZGkAL8+1UoJ5p8ZWsufJKAMlQy4Vd3bIc/f6ccyy
IuGK1+lOr6c8k/F7JO8EE2GAd8c/KvjwQR+L55YkHVoyUp2f9M19obxwqkIVeD6I
X0y8OFNY+3hfzub6VRXob8EBmEUIdOCh6GWtT7mwzTyIouscfHltQHQxR2fMaMFF
G066lkuVvpxhYjKtGePfQi9GtOQvdAHe7l/RS0AK53+FNzAP2I6guHRD6TSsVfNe
erqY+4//256s/97GeqQ8ON/2gz6u/0rH6e+GiEvoMaTaw0+1YKA9xHi2Qx4AvUHk
8TNNNZbL2PoDj744Tj1xF/zenlm1BxNeK1Q0l89ZNqPNPEokF4Hq11dW56beWpv7
gCina3gveAnmZvdJYbn0UJ92eXjff4ZdLmiZVlVyrX2k9PVu2NYOQz4E0cPbL0Gt
SNYgBW78e1VOcNpUokfq3OiTOQo1VDaW1SypcCbYkuc7tROq0xU=
=Z413
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"Improve the behavior during panic. The issues were found when testing
the ongoing changes introducing atomic consoles and printk kthreads:
- pr_flush() has to wait for the last reserved record instead of the
last finalized one. Note that records are finalized in random order
when generated by more CPUs in parallel.
- Ignore non-finalized records during panic(). Messages printed on
panic-CPU are always finalized. Messages printed by other CPUs
might never be finalized when the CPUs get stopped.
- Block new printk() calls on non-panic CPUs completely. Backtraces
are printed before entering the panic mode. Later messages would
just mess information printed by the panic CPU.
- Do not take console_lock in console_flush_on_panic() at all. The
original code did try_lock()/console_unlock(). The unlock part
might cause a deadlock when panic() happened in a scheduler code.
- Fix conversion of 64-bit sequence number for 32-bit atomic
operations"
* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
dump_stack: Do not get cpu_sync for panic CPU
panic: Flush kernel log buffer at the end
printk: Avoid non-panic CPUs writing to ringbuffer
printk: Disable passing console lock owner completely during panic()
printk: ringbuffer: Skip non-finalized records in panic
printk: Wait for all reserved records with pr_flush()
printk: ringbuffer: Cleanup reader terminology
printk: Add this_cpu_in_panic()
printk: For @suppress_panic_printk check for other CPU in panic
printk: ringbuffer: Clarify special lpos values
printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
printk: Use prb_first_seq() as base for 32bit seq macros
printk: Adjust mapping for 32bit seq macros
printk: nbcon: Relocate 32bit seq macros
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmXwH0wACgkQu+CwddJF
iJq3HAf6A/0m0pSr0QDcwjM8D7TVYQJ+Z/jPC6Mj+HfTcF8Otrgk8c0M6EsHGIGF
GQNnYJRKmBla3mpVFvDtsVZuiakEtRLCpoP5n23s8p8gY9ibJcl6bpn9NaMVMKrq
kBnhQ9VdLAgKVcTH8wz6jJqdWiZ7W4jGH5NWO+nr+r0H7vay7jfB0+tur1NO8J09
HE5I76XE6ArRvaKYxvsZmOx1pihSmsJ7CerXN6Y8U5qcuxNXdUO/9rf+uv5llDIV
gl54UAU79koZ9k88t5AiSKO2IZVhBgC/j66ds9MRRAFCf/ldxUtJIlsHTOnumfmy
FApqwtR0MYNPeMPZpzogQbv58oOcNw==
=XDxn
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Freelist loading optimization (Chengming Zhou)
When the per-cpu slab is depleted and a new one loaded from the cpu
partial list, optimize the loading to avoid an irq enable/disable
cycle. This results in a 3.5% performance improvement on the "perf
bench sched messaging" test.
- Kernel boot parameters cleanup after SLAB removal (Xiongwei Song)
Due to two different main slab implementations we've had boot
parameters prefixed either slab_ and slub_ with some later becoming
an alias as both implementations gained the same functionality (i.e.
slab_nomerge vs slub_nomerge). In order to eventually get rid of the
implementation-specific names, the canonical and documented
parameters are now all prefixed slab_ and the slub_ variants become
deprecated but still working aliases.
- SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka)
The flags had hardcoded #define values which became tedious and
error-prone when adding new ones. Assign the values via an enum that
takes care of providing unique bit numbers. Also deprecate
SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since
SLAB removal. Assign it an explicit zero value. The removals of the
flag usage are handled independently in the respective subsystems,
with a final removal of any leftover usage planned for the next
release.
- Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian)
Includes removal of unused code or function parameters and a fix of a
memleak.
* tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: remove PARTIAL_NODE slab_state
mm, slab: remove memcg_from_slab_obj()
mm, slab: remove the corner case of inc_slabs_node()
mm/slab: Fix a kmemleak in kmem_cache_destroy()
mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
mm, slab: use an enum to define SLAB_ cache creation flags
mm, slab: deprecate SLAB_MEM_SPREAD flag
mm, slab: fix the comment of cpu partial list
mm, slab: remove unused object_size parameter in kmem_cache_flags()
mm/slub: remove parameter 'flags' in create_kmalloc_caches()
mm/slub: remove unused parameter in next_freelist_entry()
mm/slub: remove full list manipulation for non-debug slab
mm/slub: directly load freelist from cpu partial slab in the likely case
mm/slub: make the description of slab_min_objects helpful in doc
mm/slub: replace slub_$params with slab_$params in slub.rst
mm/slub: unify all sl[au]b parameters with "slab_$param"
Documentation: kernel-parameters: remove noaliencache
-----BEGIN PGP SIGNATURE-----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=0mTM
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Promote IMA/EVM to a proper LSM
This is the bulk of the diffstat, and the source of all the changes
in the VFS code. Prior to the start of the LSM stacking work it was
important that IMA/EVM were separate from the rest of the LSMs,
complete with their own hooks, infrastructure, etc. as it was the
only way to enable IMA/EVM at the same time as a LSM.
However, now that the bulk of the LSM infrastructure supports
multiple simultaneous LSMs, we can simplify things greatly by
bringing IMA/EVM into the LSM infrastructure as proper LSMs. This is
something I've wanted to see happen for quite some time and Roberto
was kind enough to put in the work to make it happen.
- Use the LSM hook default values to simplify the call_int_hook() macro
Previously the call_int_hook() macro required callers to supply a
default return value, despite a default value being specified when
the LSM hook was defined.
This simplifies the macro by using the defined default return value
which makes life easier for callers and should also reduce the number
of return value bugs in the future (we've had a few pop up recently,
hence this work).
- Use the KMEM_CACHE() macro instead of kmem_cache_create()
The guidance appears to be to use the KMEM_CACHE() macro when
possible and there is no reason why we can't use the macro, so let's
use it.
- Fix a number of comment typos in the LSM hook comment blocks
Not much to say here, we fixed some questionable grammar decisions in
the LSM hook comment blocks.
* tag 'lsm-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (28 commits)
cred: Use KMEM_CACHE() instead of kmem_cache_create()
lsm: use default hook return value in call_int_hook()
lsm: fix typos in security/security.c comment headers
integrity: Remove LSM
ima: Make it independent from 'integrity' LSM
evm: Make it independent from 'integrity' LSM
evm: Move to LSM infrastructure
ima: Move IMA-Appraisal to LSM infrastructure
ima: Move to LSM infrastructure
integrity: Move integrity_kernel_module_request() to IMA
security: Introduce key_post_create_or_update hook
security: Introduce inode_post_remove_acl hook
security: Introduce inode_post_set_acl hook
security: Introduce inode_post_create_tmpfile hook
security: Introduce path_post_mknod hook
security: Introduce file_release hook
security: Introduce file_post_open hook
security: Introduce inode_post_removexattr hook
security: Introduce inode_post_setattr hook
security: Align inode_setattr hook definition with EVM
...
-----BEGIN PGP SIGNATURE-----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=Vd4D
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Really only a few notable changes:
- Continue the coding style/formatting fixup work
This is the bulk of the diffstat in this pull request, with the
focus this time around being the security/selinux/ss directory.
We've only got a couple of files left to cleanup and once we're
done with that we can start enabling some automatic style
verfication and introduce tooling to help new folks format their
code correctly.
- Don't restrict xattr copy-up when SELinux policy is not loaded
This helps systems that use overlayfs, or similar filesystems,
preserve their SELinux labels during early boot when the SELinux
policy has yet to be loaded.
- Reduce the work we do during inode initialization time
This isn't likely to show up in any benchmark results, but we
removed an unnecessary SELinux object class lookup/calculation
during inode initialization.
- Correct the return values in selinux_socket_getpeersec_dgram()
We had some inconsistencies with respect to our return values
across selinux_socket_getpeersec_dgram() and
selinux_socket_getpeersec_stream().
This provides a more uniform set of error codes across the two
functions and should help make it easier for users to identify
the source of a failure"
* tag 'selinux-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (24 commits)
selinux: fix style issues in security/selinux/ss/symtab.c
selinux: fix style issues in security/selinux/ss/symtab.h
selinux: fix style issues in security/selinux/ss/sidtab.c
selinux: fix style issues in security/selinux/ss/sidtab.h
selinux: fix style issues in security/selinux/ss/services.h
selinux: fix style issues in security/selinux/ss/policydb.c
selinux: fix style issues in security/selinux/ss/policydb.h
selinux: fix style issues in security/selinux/ss/mls_types.h
selinux: fix style issues in security/selinux/ss/mls.c
selinux: fix style issues in security/selinux/ss/mls.h
selinux: fix style issues in security/selinux/ss/hashtab.c
selinux: fix style issues in security/selinux/ss/hashtab.h
selinux: fix style issues in security/selinux/ss/ebitmap.c
selinux: fix style issues in security/selinux/ss/ebitmap.h
selinux: fix style issues in security/selinux/ss/context.h
selinux: fix style issues in security/selinux/ss/context.h
selinux: fix style issues in security/selinux/ss/constraint.h
selinux: fix style issues in security/selinux/ss/conditional.c
selinux: fix style issues in security/selinux/ss/conditional.h
selinux: fix style issues in security/selinux/ss/avtab.c
...
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability and, with
luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also dropped
the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
...and lots of fixes and updates.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmXvKVIACgkQF0NaE2wM
flik1gf/ZFS1mHwDdmHA/vpx8UxdUlFEo0Pms8V24iPSW5aEIqkZ406c9DSyMTtp
CXTzW+RSCfB1Q3ciYtakHBgv0RzZ5+RyaEZ1l7zVmMyw4nYvK6giYKmg8Y0EVPKI
fAVuPWo5iE7io0sNVbKBKJJkj9Z8QEScM48hv/CV1FblMvHYn0lie6muJrF9G6Ez
HND+hlYZtWkbRd5M86CDBiFeGMLVPx17T+psQyQIcbUYm9b+RUqZRHIVRLYbad7r
18r9+83DsOhXTVJCBBSfCSZwzF8yAm+eD1w47sxnSItF8OiIjqCzQgXs3BZe9TXH
h2YyeWbMN3xByA4mEgpmOPP44RW7Pg==
=SC60
-----END PGP SIGNATURE-----
Merge tag 'docs-6.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
-----BEGIN PGP SIGNATURE-----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=ya1r
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Two small audit patches:
- Use the KMEM_CACHE() macro instead of kmem_cache_create()
The guidance appears to be to use the KMEM_CACHE() macro when
possible and there is no reason why we can't use the macro, so
let's use it.
- Remove an unnecessary assignment in audit_dupe_lsm_field()
A return value variable was assigned a value in its declaration,
but the declaration value is overwritten before the return value
variable is ever referenced; drop the assignment at declaration
time"
* tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: use KMEM_CACHE() instead of kmem_cache_create()
audit: remove unnecessary assignment in audit_dupe_lsm_field()
Improvements to the initialization of in-memory inodes.
A fix in ramfs to propery ensure the initialization of
in-memory inodes.
Removal of duplicated code in smack_cred_transfer().
-----BEGIN PGP SIGNATURE-----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=QDx7
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-6.9' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
- Improvements to the initialization of in-memory inodes
- A fix in ramfs to propery ensure the initialization of in-memory
inodes
- Removal of duplicated code in smack_cred_transfer()
* tag 'Smack-for-6.9' of https://github.com/cschaufler/smack-next:
Smack: use init_task_smack() in smack_cred_transfer()
ramfs: Initialize security of in-memory inodes
smack: Initialize the in-memory inode in smack_inode_init_security()
smack: Always determine inode labels in smack_inode_init_security()
smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity()
smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr()
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
Max Staudt
Linus Torvalds
Jiri Kosina
Christian Brauner