IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Causes an early 32-bit wrap and may thus help CI catch wrapping errors
that may otherwise not show early enough.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce xe_engine_is_idle, and replace the static function in
xe_migrate.c.
The latter had two flaws. First the seqno == 1 test might return a false
true value each time the seqno counter wrapped, Second, the
cur_seqno == next_seqno test would never return true.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The migrate test currently supports only GPU pagetable updates and
will thus break if we fix the CPU pagetable update selection.
Fix the migrate test first.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Don't wait for GPU to be able to update page-tables using CPU. Putting
ourselves to sleep may be more of a problem than using GPU for
page-table updates. Also allow the vm to be NULL since the migrate
kunit test uses NULL for vm.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Also for HW fences, write the initial seqno - 1 to the HW completed
seqno to initialize.
v2:
- Use __dma_fence_is_later() to compare hw fence seqnos. (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GuC/HuC firmware files used by Xe drivers are the same as
used by i915. Use the already-known location to find those
firmware files, for a couple of reasons:
1. Avoid having the same firmware placed on two different
places on MODULE_FIRMWARE(), if both 915 and xe drivers
are compiled;
2. Having firmware files located on different locations may end
creating bigger initramfs, as the same files will be copied
twice my mkinitrd/dracut/...;
3. this is the place where those firmware files are located at
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
Upstream doesn't expect them to have on other places;
4. When built with display support, DMC firmware will be
loaded from i915/ directory. It is very confusing to have
some firmware files on a different place for the same driver.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas de Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[ Mostly agree with the direction of "use the firmware blobs from
upstream at their current location for these platforms". Previous
directory was not wrong as the plan was to have it handled in the
upstream firmware repo. For future platforms the location can be
changed if the support is only in xe ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230310081338.3275583-1-mauro.chehab@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's just a local variable.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All structs and defines had already been renamed to "xe", but some
comments with "i915" were left over. Rename them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20230313211628.2492587-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize LRC workarounds for graphics version 1200 with i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").
These were probably missed for TGL/RKL before because in i915 it uses a
!IS_DG1() condition. Avoid a similar issue by just checking the
graphics version 1200 since DG1 is 1210.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-14-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the one missing workaround for ADL-P when comparing to i915 up to
commit 7cdae9e9ee5e ("drm/i915: Move DG2 tuning to the right function").
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-13-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 lrc workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to some
steps of a subplatform and all the steppings of the other subplatforms.
In this case, it was simply applied to all the steppings, which only
means applying it to a few more A* steppings.
The implementation of the workaround 16011186671 triggers a bug in the
RTP infra: it's not possible to set the flag the usual way when having
multiple actions in the entry. This may be fixed later, but for now it's
sufficient to just set the flag directly without the helper macro.
v2: Fix 14014947963 to use FIELD_SET (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-12-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 tunings as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Contrary to the tuning "gang timer" for TGL, there is no quick
justification for why the read back is disabled in i915. Keep it
with that flag for now. That can be tentatively removed later when the
read values are checked.
v2: Use XEHP_FF_MODE2 instead of GEN12_FF_MODE2 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-11-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to
some steps of a subplatform and all the steppings of the other
subplatforms. This happened with Wa_1509727124, Wa_22012856258 and a few
others. In figure the pre-production steppings will be removed, so this
can be already simplified a little bit.
v2:
- Make 1308578152 conditional on first gslice fused off
- Add the missing Wa_1608949956/Wa_14010198302 (Matt Roper)
v3:
- Do not duplicate the implementation of 18019627453 since it's
already covered by other WA numbers in graphics versions 1200 and
1210
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-10-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-9-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync PVC engine workarounds with i915.
v2: Remove 16016694945. It was added by mistake. It's a GT workaround,
already present in the GT table (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the PVC gt workarounds as of committ
commit 4d14d7717f19 ("drm/i915/selftest: Fix ktime_get() and h/w
access order").
v2: Add masked flag to XEHPC_LNCFMISCCFGREG0 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that number of platforms is growing, it's getting hard to know the
workarounds for each platform. Split the entries inside the same table
so the workarounds checking IP version are listed first, followed by
each platform. Next step when it grows too much is to split in smaller
tables.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-6-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add debugfs entry to dump the final tables with register save-restore
information.
For the workarounds, this has a format a little bit different than when the
values are applied because we don't want to read the values from the HW
when dumping via debugfs. For whitelist it just re-uses the print
function added for when the whitelist is being built.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-5-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Besides printing the various register save-restore, it's also useful to
know the register being allowed/denied access from unprivileged batch
buffers. Print them during device probe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-4-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add match helper to detect when the first gslice is fused off, as needed
by future workarounds.
v2:
- Add warning if called on a platform without geometry pipeline
(Matt Roper)
- Hardcode 4 as the number of gslices, which matches all the currently
supported platforms. PVC doesn't have geometry pipeline and
shouldn't use this function (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_ttm_stolen_cpu_inaccessible() was originally meant to just cover the
case where stolen is not directly CPU accessible on some older
integrated platforms, and as such a GGTT mapping was also required for
CPU access (as per the check in xe_bo_create_pin_map_at()).
However with small-bar systems on dgfx we have one more case where
stolen is also inaccessible, however here we don't have any fallback
GGTT mode for CPU access. Fix the check in xe_bo_create_pin_map_at() to
make this distinction clear. In such a case the later vmap() will fail
anyway.
v2: fix kernel-doc warning
v3: Simplify further and remove cpu_inaccessible()
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks to have been introduced in some very recent changes, in-between
merging the driver wide s/lmem/vram/.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Be careful about having const in the compound literal initialization to
keep the initializers in rodata. Here, the impact is 1.8k of mutable
data moved to rodata.
add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-1804 (-1804)
Data old new delta
__compound_literal 1804 - -1804
Total: Before=42425, After=40621, chg -4.25%
add/remove: 0/0 grow/shrink: 1/0 up/down: 1804/0 (1804)
RO Data old new delta
__compound_literal 7696 9500 +1804
Total: Before=138535, After=140339, chg +1.30%
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309121746.479146-1-jani.nikula@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The PVC pre-production A* steppings are not going to be supported in xe
driver - the steppings are important for the WAs and since we are not
adding the pre-productions ones, there is no need to add the stepping.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This makes it easier when printing the register-save-restore values
to know what is the engine.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dump function was originally added with the idea that it could be
re-used both for printing the reg-sr data and saving it to pass to GuC
via ADS. This was not used by the GuC integration, so remove it now to
give place to a new debug.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This allows to create WA/tuning rules that match the first engine that
is either of compute or render class. This matters for platforms that
don't have a render engine and that may have arbitrary compute engines
fused off: some register programming need to be added to one of those
engines.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Match functions are generally useful for other parts of the code (e.g.
xe_tuning.c). Move and rename the single one available to create a place
where similar match functions can be added.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Due to how xe_dss_mask_t is implemented, the type is a pointer. Since
this is only used for looking up the bits, make it const so it can be
used together with a const gt passed around.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace the inline function with a _Generic() so gt_to_xe() can work
with a const struct xe_gt*, which leads to a const struct xe *.
This allows a const gt being passed around and when the xe device is
needed, compiler won't issue a warning that calling gt_to_xe() would
discard the const. Rather, just propagate the const to the xe pointer
being returned.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a sentence about the initialization so it's clear for newcomers how
to tweak the init functions for new platforms.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some register ranges with replication type L3BANK were missing from the
driver table. The following warning was triggering when adding a
workaround touching the register 0xb188:
xe 0000:03:00.0: Did not find MCR register 0xb188 in any MCR steering table
Add the L3BANK ranges according to the spec.
v2:
- Fix typo in one of the ranges: s/0x00BCFF/0x008CFF/ (Matt Roper)
- Add termination rule in the init function for L3BANK (Matt Roper)
Bspec: 66534
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For Xe_HP platforms that can have multiple CCS engines, the
presence/absence of each CCS is inferred by the presence/absence of any
DSS in the corresponding quadrant of the GT's DSS mask.
This handling is only needed on platforms that can have more than one
CCS. The CCS is never fused off on platforms like MTL that can only
have one.
v2:
- Add extra warnings to try to catch mistakes where the register counts
in get_num_dss_regs() are updated without corresponding updates to
the register parameters passed to load_dss_mask(). (Lucas)
- Add kerneldoc for xe_gt_topology_has_dss_in_quadrant() and clarify
why we care about quadrants of the DSS space. (Lucas)
- Ensure CCS engine counting treats engine mask as 64-bit. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309005530.3140173-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The single function to handle fuse registers for all types of engines is
becoming a bit long and hard to follow (and we haven't even added the
compute engines yet). Let's split it into dedicated functions for each
engine class.
v2:
- Add note about BCS0 always being present. (Bala)
- Add forcewake assertion to read_copy_fuses. (Bala)
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230309005530.3140173-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This seems to be the preferred nomenclature in xe. Currently we are
intermixing vram and lmem, which is confusing.
v2 (Gwan-gyeong Mun & Lucas):
- Rather apply to the entire driver
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Checking whether a single engine's register save/restore entries
overflow the expected/pre-allocated GuC ADS regset area isn't terribly
useful; we actually want to check whether the combined entries from all
engines on the GT overflow the regset space.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230308005509.2975663-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The address set by firmware in GEN12_DSMBASE in driver initialization
doesn't mean "anything above that and until end of lmem is part of DSM".
In fact, there may be a few KB that is not part of DSM on the end of
lmem. How large is that space is platform-dependent, but since it's
always less than the DSM granularity, it can be simplified by simply
aligning the size down.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It appears we don't hold a memory access reference for the accesses in
this test, which may results in printed warnings and possibly the GT
not woken up for the memory accesses.
Add a memory access reference around the test.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently don't have any tests that explicitly depends on this
config option, so remove that build dependency.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When this register was added in xe for some workarounds, it was copied
from i915 before the registers got changed to add the MCR annotation.
The register 0xe4f4 is MCR since gen8, long before any GPU supported by
the xe driver. Replace all occurrences with the right register.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230306165757.633796-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The following warning shows up for TGL:
[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22
[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22
That is because the same register is being set both by the WAs and the
tunings. Like was done in i915, prefer the tuning over the workaround
since that is applicable for more platforms. Also fix the tuning: it
was incorrectly using the MCR version of the register, but that only
became true in XEHP.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/233
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230306212450.803557-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
XE_MAX_DSS_FUSE_REGS was being used to calculate the size of
xe_eu_mask_t while it should use XE_MAX_EU_FUSE_REGS.
There are no know issues about this but fixing it anyways.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix typo as noticed by Matt Roper:
git grep -l persitent | xargs sed -i 's/persitent/persistent/g'
... and then fix coding style issues.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20230302013411.3262608-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's inconsistent use of mutex_init(), in xe_device_create(), with
several of them never calling mutex_destroy() in xe_device_destroy().
Migrate all of them to drmm_mutex_init(), so the destroy part is
automatically called.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230225002138.1759016-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the depths of ttm, when allocating the vma node this should result in
-ENOSPC it seems. However we should probably rather reject as part of
our own ioctl sanity checking, and then treat as programmer error in the
lower levels.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With small-bar we likely want to annotate all the kernel users that
require CPU access with vram. If xe_bo_create_pin_map() is the central
place for that then we should have a central place to annotate.
This also simplifies the code and fixes what appears to be a double
xe_bo_put(hwe->hwsp) in the error handling.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
