IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch fixes/removes some obsolete comments in the code related
to the kernel memory accounting:
- kmem_cache->memcg_params.memcg_caches has been removed by commit
9855609bde ("mm: memcg/slab: use a single set of kmem_caches for
all accounted allocations")
- memcg->kmemcg_id is not used as a gate for kmem accounting since
commit 0b8f73e104 ("mm: memcontrol: clean up alloc, online,
offline, free functions")
Link: https://lkml.kernel.org/r/20201110184615.311974-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page->mem_cgroup member is replaced by memcg_data, and add a helper
page_memcg() for it. Need to update comments to avoid confusing.
Link: https://lkml.kernel.org/r/1491c150-1cc0-6062-08ea-9c891548a3bc@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 369ea8242c ("mm/rmap: update to new mmu_notifier semantic
v2"), the code to check the secondary MMU's page table access bit is
broken for !(TTU_IGNORE_ACCESS) because the page is unmapped from the
secondary MMU's page table before the check. More specifically for those
secondary MMUs which unmap the memory in
mmu_notifier_invalidate_range_start() like kvm.
However memory reclaim is the only user of !(TTU_IGNORE_ACCESS) or the
absence of TTU_IGNORE_ACCESS and it explicitly performs the page table
access check before trying to unmap the page. So, at worst the reclaim
will miss accesses in a very short window if we remove page table access
check in unmapping code.
There is an unintented consequence of !(TTU_IGNORE_ACCESS) for the memcg
reclaim. From memcg reclaim the page_referenced() only account the
accesses from the processes which are in the same memcg of the target page
but the unmapping code is considering accesses from all the processes, so,
decreasing the effectiveness of memcg reclaim.
The simplest solution is to always assume TTU_IGNORE_ACCESS in unmapping
code.
Link: https://lkml.kernel.org/r/20201104231928.1494083-1-shakeelb@google.com
Fixes: 369ea8242c ("mm/rmap: update to new mmu_notifier semantic v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get to memcg.
If the whole process of a cgroup offlining is completed between reading a
objcg->memcg pointer and bumping the css reference on another CPU, and
there are exactly 0 external references to this memory cgroup (how we get
to the obj_cgroup_charge() then?), css_get() can change the ref counter
from 0 back to 1.
Link: https://lkml.kernel.org/r/20201028035013.99711-2-songmuchun@bytedance.com
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Consider the following memcg hierarchy.
root
/ \
A B
If we failed to get the reference on objcg of memcg A, the
get_obj_cgroup_from_current can return the wrong objcg for the root
memcg.
Link: https://lkml.kernel.org/r/20201029164429.58703-1-songmuchun@bytedance.com
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mz->usage_in_excess >= mz_node->usage_in_excess check is exactly the
else case of mz->usage_in_excess < mz_node->usage_in_excess. So we could
replace else if (mz->usage_in_excess >= mz_node->usage_in_excess) with
else equally. Also drop the comment which doesn't really explain much.
Link: https://lkml.kernel.org/r/20201012131607.10656-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 991e767385 ("mm: memcontrol: account kernel stack per
node") there is no user of the mod_memcg_obj_state(). So just remove
it.
Also rework type of the idx parameter of the mod_objcg_state() from int
to enum node_stat_item.
Link: https://lkml.kernel.org/r/20201013153504.92602-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As huge page usage in the page cache and for shmem files proliferates in
our production environment, the performance monitoring team has asked for
per-cgroup stats on those pages.
We already track and export anon_thp per cgroup. We already track file
THP and shmem THP per node, so making them per-cgroup is only a matter of
switching from node to lruvec counters. All callsites are in places where
the pages are charged and locked, so page->memcg is stable.
[hannes@cmpxchg.org: add documentation]
Link: https://lkml.kernel.org/r/20201026174029.GC548555@cmpxchg.org
Link: https://lkml.kernel.org/r/20201022151844.489337-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a typo, punctuation, use uppercase for CPUs, and limit
tmpfs to keeping only its files in virtual memory (phrasing).
Link: https://lkml.kernel.org/r/20201202010934.18566-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_mapping() isn't worth an out-of-line call from any callsite.
So make it inline by
- make shmem_aops global
- export shmem_aops
- inline the shmem_mapping()
and replace the direct call 'shmem_aops' with shmem_mapping()
in shmem.c.
Link: https://lkml.kernel.org/r/20201115165207.GA265355@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the merge of commit 2e16929660 ("ceph: have ceph_writepages_start
call pagevec_lookup_range_tag"), nothing calls this anymore.
Link: https://lkml.kernel.org/r/20201021193926.101474-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could use helper memset to fill the swap_map with SWAP_HAS_CACHE instead
of a direct loop here to simplify the code. Also we can remove the local
variable i and map this way.
Link: https://lkml.kernel.org/r/20200921122224.7139-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the code went to the out label, it must have p == NULL. So what out
label really does is redundant if check and return err. We should Remove
this unnecessary out label because it does not handle resource free and so
on.
Link: https://lkml.kernel.org/r/20201009130337.29698-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
swap_ra_info() may leave ra_info untouched in non_swap_entry() case as
page table lock is not held. In this case, we have ra_info.nr_pte == 0
and it is meaningless to continue with swap cache readahead. Skip such
ops by init ra_info.win = 1.
[akpm@linux-foundation.org: clean up struct init]
Link: https://lkml.kernel.org/r/20201009133059.58407-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 570a335b8e ("swap_info: swap count continuations") introduced the
func add_swap_count_continuation() but forgot to use the helper function
swap_count() introduced by commit 355cfa73dd ("mm: modify swap_map and
add SWAP_HAS_CACHE flag").
Link: https://lkml.kernel.org/r/20201009134306.18033-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
release_pages() is an optimized, inlined version of __put_pages() except
that zone device struct pages that are not page_is_devmap_managed() (i.e.,
memory_type MEMORY_DEVICE_GENERIC and MEMORY_DEVICE_PCI_P2PDMA), fall
through to the code that could return the zone device page to the page
allocator instead of adjusting the pgmap reference count.
Clearly these type of pages are not having the reference count decremented
to zero via release_pages() or page allocation problems would be seen.
Just to be safe, handle the 1 to zero case in release_pages() like
__put_page() does.
Link: https://lkml.kernel.org/r/20201021194733.11530-1-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions accomplish the same thing but have different
implementations.
unpin_user_page() has a bug where it calls mod_node_page_state() after
calling put_page() which creates a risk that the page could have been
hot-uplugged from the system.
Fix this by using put_compound_head() as the only implementation.
__unpin_devmap_managed_user_page() and related can be deleted as well in
favour of the simpler, but slower, version in put_compound_head() that has
an extra atomic page_ref_sub, but always calls put_page() which internally
contains the special devmap code.
Move put_compound_head() to be directly after try_grab_compound_head() so
people can find it in future.
Link: https://lkml.kernel.org/r/0-v1-6730d4ee0d32+40e6-gup_combine_put_jgg@nvidia.com
Fixes: 1970dc6f52 ("mm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: Joao Martins <joao.m.martins@oracle.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Dave Chinner <david@fromorbit.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Jane Chu <jane.chu@oracle.com>
CC: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
CC: Michal Hocko <mhocko@suse.com>
CC: Mike Kravetz <mike.kravetz@oracle.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Muchun Song <songmuchun@bytedance.com>
CC: Vlastimil Babka <vbabka@suse.cz>
CC: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Long ago there wasn't a FOLL_LONGTERM flag so this DAX check was done by
post-processing the VMA list.
These days it is trivial to just check each VMA to see if it is DAX before
processing it inside __get_user_pages() and return failure if a DAX VMA is
encountered with FOLL_LONGTERM.
Removing the allocation of the VMA list is a significant speed up for many
call sites.
Add an IS_ENABLED to vma_is_fsdax so that code generation is unchanged
when DAX is compiled out.
Remove the dummy version of __gup_longterm_locked() as !CONFIG_CMA already
makes memalloc_nocma_save(), check_and_migrate_cma_pages(), and
memalloc_nocma_restore() into a NOP.
Link: https://lkml.kernel.org/r/0-v1-5551df3ed12e+b8-gup_dax_speedup_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 70e806e4e6 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork. This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.
However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:
CPU 0 CPU 1
get_user_pages_fast()
internal_get_user_pages_fast()
copy_page_range()
pte_alloc_map_lock()
copy_present_page()
atomic_read(has_pinned) == 0
page_maybe_dma_pinned() == false
atomic_set(has_pinned, 1);
gup_pgd_range()
gup_pte_range()
pte_t pte = gup_get_pte(ptep)
pte_access_permitted(pte)
try_grab_compound_head()
pte = pte_wrprotect(pte)
set_pte_at();
pte_unmap_unlock()
// GUP now returns with a write protected page
The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e ("mm: avoid
early COW write protect games during fork()")
Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range(). If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.
Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com
Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Add a seqcount between gup_fast and copy_page_range()", v4.
As discussed and suggested by Linus use a seqcount to close the small race
between gup_fast and copy_page_range().
Ahmed confirms that raw_write_seqcount_begin() is the correct API to use
in this case and it doesn't trigger any lockdeps.
I was able to test it using two threads, one forking and the other using
ibv_reg_mr() to trigger GUP fast. Modifying copy_page_range() to sleep
made the window large enough to reliably hit to test the logic.
This patch (of 2):
The next patch in this series makes the lockless flow a little more
complex, so move the entire block into a new function and remove a level
of indention. Tidy a bit of cruft:
- addr is always the same as start, so use start
- Use the modern check_add_overflow() for computing end = start + len
- nr_pinned/pages << PAGE_SHIFT needs the LHS to be unsigned long to
avoid shift overflow, make the variables unsigned long to avoid coding
casts in both places. nr_pinned was missing its cast
- The handling of ret and nr_pinned can be streamlined a bit
No functional change.
Link: https://lkml.kernel.org/r/0-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Link: https://lkml.kernel.org/r/1-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without DEBUG_FS, all the code in gup_benchmark becomes meaningless.
For sure kernel provides debugfs stub while DEBUG_FS is disabled, but
the point here is that GUP_TEST can do nothing without DEBUG_FS.
[song.bao.hua@hisilicon.com: add comment as a prompt to users as commented by John and Randy]
Link: https://lkml.kernel.org/r/20201108083732.15336-1-song.bao.hua@hisilicon.com
Link: https://lkml.kernel.org/r/20201104100552.20156-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gup_test_init() is only called during initialization, mark it as __init to
save some memory.
Link: https://lkml.kernel.org/r/20201103081016.16532-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each invocation of userfaultfd for "anon" and "shmem" was taking about
6.5 sec to run, contributing to an overall run time of about 22 sec for
run_vmtests.sh.
Reduce the size and bounce input values to the userfaultfd invocation
within run_vmtests.sh, enough to get each invocation down to about 1.0
sec. This should still provide a reasonable smoke test, while staying
within a nominal time budget of around 1 second or so per test. And this
brings the overall running time of run_vmtests.sh down to 11 second.
Link: https://lkml.kernel.org/r/20201026064021.3545418-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM selftests are incredibly useful, but they are only effective if people
actually build and run them. All the other tests in selftests/vm can be
built with very standard, always-available libraries: libpthread, librt.
The hmm-tests.c program, on the other hand, requires something that is
(much) less readily available: libhugetlbfs. And so the build will
typically fail for many developers.
A simple attempt to install libhugetlbfs will also run into complications
on some common distros these days: Fedora and Arch Linux (yes, Arch AUR
has it, but that's fragile, as always with AUR). The library is not
maintained actively enough at the moment, for distros to deal with it. I
had to build it from source, for Fedora, and that didn't go too smoothly
either.
It turns out that, out of 21 tests in hmm-tests.c, only 2 actually require
functionality from libhugetlbfs. Therefore, if libhugetlbfs is missing,
simply ifdef those two tests out and allow the developer to at least have
the other 19 tests, if they don't want to pause to work through the above
issues. Also issue a warning, so that it's clear that there is an
imperfection in the build.
In order to do that, a tiny shell script (check_config.sh) runs a quick
compile (not link, that's too prone to false failures with library paths),
and basically, if the compiler doesn't find hugetlbfs.h in its standard
locations, then the script concludes that libhugetlbfs is not available.
The output is in two files, one for inclusion in hmm-test.c
(local_config.h), and one for inclusion in the Makefile (local_config.mk).
Link: https://lkml.kernel.org/r/20201026064021.3545418-9-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Run benchmarks on the _fast variants of gup and pup, as originally
intended.
Run the new gup_test sub-test: dump pages. In addition to exercising the
dump_page() call, it also demonstrates the various options you can use to
specify which pages to dump, and how.
Link: https://lkml.kernel.org/r/20201026064021.3545418-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For quite a while, I was doing a quick hack to gup_test.c (previously,
gup_benchmark.c) whenever I wanted to try out my changes to dump_page().
This makes that hack unnecessary, and instead allows anyone to easily get
the same coverage from a user space program. That saves a lot of time
because you don't have to change the kernel, in order to test different
pages and options.
The new sub-test takes advantage of the existing gup_test infrastructure,
which already provides a simple user space program, some allocated user
space pages, an ioctl call, pinning of those pages (via either
get_user_pages or pin_user_pages) and a corresponding kernel-side test
invocation. There's not much more required, mainly just a couple of
inputs from the user.
In fact, the new test re-uses the existing command line options in order
to get various helpful combinations (THP or normal, _fast or slow gup, gup
vs. pup, and more).
New command line options are: which pages to dump, and what type of
"get/pin" to use.
In order to figure out which pages to dump, the logic is:
* If the user doesn't specify anything, the page 0 (the first page in
the address range that the program sets up for testing) is dumped.
* Or, the user can type up to 8 page indices anywhere on the command
line. If you type more than 8, then it uses the first 8 and ignores the
remaining items.
For example:
./gup_test -ct -F 1 0 19 0x1000
Meaning:
-c: dump pages sub-test
-t: use THP pages
-F 1: use pin_user_pages() instead of get_user_pages()
0 19 0x1000: dump pages 0, 19, and 4096
Link: https://lkml.kernel.org/r/20201026064021.3545418-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Therefore, some minor cleanup and improvements are in order:
1. Rename the other items appropriately.
2. Stop reporting timing information on the non-benchmark items. It's
still being recorded and is available, but there's no point in
cluttering up the report with data that no one reasonably needs to
check.
3. Don't do iterations, for non-benchmark items.
4. Print out a shorter, more appropriate report for the non-benchmark
tests.
5. Add the command that was run, to the report. This really helps, as
there are quite a lot of options now.
6. Use a larger integer type for cmd, now that it's being compared
Otherwise it doesn't work, because in this case cmd is about 3 billion,
which is the perfect size for problems with signed vs unsigned int.
Link: https://lkml.kernel.org/r/20201026064021.3545418-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few cleanups that don't deserve separate patches, but that also should
not clutter up other functional changes:
1. Remove an unnecessary #include <prctl.h>
2. Restore the sorted order of TEST_GEN_FILES.
3. Add -lpthread to the common LDLIBS, as it is harmless and several
tests use it. This gets rid of one special rule already.
Link: https://lkml.kernel.org/r/20201026064021.3545418-5-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename to *.sh, in order to match the conventions of all of the other
items in selftest/vm.
The only reason not to use a .sh suffix a shell script like this, might be
to make it look more like a normal program, but that's not an issue here.
Link: https://lkml.kernel.org/r/20201026064021.3545418-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid the need to copy-paste the gup_test ioctl commands and the struct
gup_test definition, between the kernel and the user space application, by
providing a new header file for these. This allows easier and safer
adding of new ioctl calls, as well as reducing the overall line count.
Details: The header file has to be able to compile independently, because
of the arguably unfortunate way that the Makefile is written: the Makefile
tries to build all of its prerequisites, when really it should be only
building the .c files, and leaving the other prerequisites (LOCAL_HDRS) as
pure dependencies.
That Makefile limitation is probably not worth fixing, but it explains why
one of the includes had to be moved into the new header file.
Also: simplify the ioctl struct (struct gup_test), by deleting the unused
__expansion[10] field. This sort of thing is what you might see in a
stable ABI, but this low-level, kernel-developer-oriented selftests/vm
system is very much not subject to ABI stability. So "expansion" and
"reserved" fields are unnecessary here.
Link: https://lkml.kernel.org/r/20201026064021.3545418-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3.
Summary: This series provides two main things, and a number of smaller
supporting goodies. The two main points are:
1) Add a new sub-test to gup_test, which in turn is a renamed version
of gup_benchmark. This sub-test allows nicer testing of dump_pages(),
at least on user-space pages.
For quite a while, I was doing a quick hack to gup_test.c whenever I
wanted to try out changes to dump_page(). Then Matthew Wilcox asked me
what I meant when I said "I used my dump_page() unit test", and I
realized that it might be nice to check in a polished up version of
that.
Details about how it works and how to use it are in the commit
description for patch #6 ("selftests/vm: gup_test: introduce the
dump_pages() sub-test").
2) Fixes a limitation of hmm-tests: these tests are incredibly useful,
but only if people actually build and run them. And it turns out that
libhugetlbfs is a little too effective at throwing a wrench in the
works, there. So I've added a little configuration check that removes
just two of the 21 hmm-tests, if libhugetlbfs is not available.
Further details in the commit description of patch #8
("selftests/vm: hmm-tests: remove the libhugetlbfs dependency").
Other smaller things that this series does:
a) Remove code duplication by creating gup_test.h.
b) Clear up the sub-test organization, and their invocation within
run_vmtests.sh.
c) Other minor assorted improvements.
[1] v2 is here:
https://lore.kernel.org/linux-doc/20200929212747.251804-1-jhubbard@nvidia.com/
[2] https://lore.kernel.org/r/CAHk-=wgh-TMPHLY3jueHX7Y2fWh3D+nMBqVS__AZm6-oorquWA@mail.gmail.com
This patch (of 9):
Rename nearly every "gup_benchmark" reference and file name to "gup_test".
The one exception is for the actual gup benchmark test itself.
The current code already does a *little* bit more than benchmarking, and
definitely covers more than get_user_pages_fast(). More importantly,
however, subsequent patches are about to add some functionality that is
non-benchmark related.
Closely related changes:
* Kconfig: in addition to renaming the options from GUP_BENCHMARK to
GUP_TEST, update the help text to reflect that it's no longer a
benchmark-only test.
Link: https://lkml.kernel.org/r/20201026064021.3545418-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20201026064021.3545418-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The `else' is not useful after a `return' in __lock_page_or_retry().
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20201202154720.115162-1-carver4lio@163.com
Signed-off-by: Hailong Liu<liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To fix a kernel-doc markups issue:
mm/truncate.c:646: warning: Function parameter or member 'mapping' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'start' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'end' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'nr_pagevec' not described in 'invalidate_mapping_pagevec'
Link: https://lkml.kernel.org/r/1605605088-30668-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert generic_file_buffered_read() to get pages to read from in batches,
and then copy data to userspace from many pages at once - in particular,
we now don't touch any cachelines that might be contended while we're in
the loop to copy data to userspace.
This is is a performance improvement on workloads that do buffered reads
with large blocksizes, and a very large performance improvement if that
file is also being accessed concurrently by different threads.
On smaller reads (512 bytes), there's a very small performance improvement
(1%, within the margin of error).
akpm: kernel test robot found a 32% speedup on one test:
https://lkml.kernel.org/r/20201030081456.GY31092@shao2-debian
Link: https://lkml.kernel.org/r/20201025212949.602194-3-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "generic_file_buffered_read() improvements", v2.
generic_file_buffered_read() has turned into a real monstrosity to work
with. And it's a major performance improvement, for both small random and
large sequential reads. On my test box, 4k buffered random reads go from
~150k to ~250k iops, and the improvements to big sequential reads are even
bigger.
This incorporates the fix for IOCB_WAITQ handling that Jens just posted as
well, also factors out lock_page_for_iocb() to improve handling of the
various iocb flags.
This patch (of 2):
This is prep work for changing generic_file_buffered_read() to use
find_get_pages_contig() to batch up all the pagecache lookups.
This patch should be functionally identical to the existing code and
changes as little as of the flow control as possible. More refactoring
could be done, this patch is intended to be relatively minimal.
Link: https://lkml.kernel.org/r/20201025212949.602194-1-kent.overstreet@gmail.com
Link: https://lkml.kernel.org/r/20201025212949.602194-2-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Collect the time for each allocation recorded in page owner so that
allocation "surges" can be measured.
Record the pid for each allocation recorded in page owner so that the
source of allocation "surges" can be better identified.
The above is very useful when doing memory analysis. On a crash for
example, we can get this information from kdump (or ramdump) and parse it
to figure out memory allocation problems.
Please note that on x86_64 this increases the size of struct page_owner
from 16 bytes to 32.
Vlastimil: it's not a functionality intended for production, so unless
somebody says they need to enable page_owner for debugging and this
increase prevents them from fitting into available memory, let's not
complicate things with making this optional.
[lmark@codeaurora.org: v3]
Link: https://lkml.kernel.org/r/20201210160357.27779-1-georgi.djakov@linaro.org
Link: https://lkml.kernel.org/r/20201209125153.10533-1-georgi.djakov@linaro.org
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page owner of pages used by page owner itself used is missing on arm32
targets. The reason is dummy_handle and failure_handle is not initialized
correctly. Buddy allocator is used to initialize these two handles.
However, buddy allocator is not ready when page owner calls it. This
change fixed that by initializing page owner after buddy initialization.
The working flow before and after this change are:
original logic:
1. allocated memory for page_ext(using memblock).
2. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
3. initialize buddy.
after this change:
1. allocated memory for page_ext(using memblock).
2. initialize buddy.
3. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
with the change, failure/dummy_handle can get its correct value and page
owner output for example has the one for page owner itself:
Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns
PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0()
init_page_owner+0x28/0x2f8
invoke_init_callbacks_flatmem+0x24/0x34
start_kernel+0x33c/0x5d8
Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page order of the slab that gets chosen for a given slab cache depends
on the number of objects that can be fit in the slab while meeting other
requirements. We start with a value of minimum objects based on
nr_cpu_ids that is driven by possible number of CPUs and hence could be
higher than the actual number of CPUs present in the system. This leads
to calculate_order() chosing a page order that is on the higher side
leading to increased slab memory consumption on systems that have bigger
page sizes.
Hence rely on the number of online CPUs when determining the mininum
objects, thereby increasing the chances of chosing a lower conservative
page order for the slab.
Vlastimil said:
"Ideally, we would react to hotplug events and update existing caches
accordingly. But for that, recalculation of order for existing caches
would have to be made safe, while not affecting hot paths. We have
removed the sysfs interface with 32a6f409b6 ("mm, slub: remove
runtime allocation order changes") as it didn't seem easy and worth
the trouble.
In case somebody wants to start with a large order right from the
boot because they know they will hotplug lots of cpus later, they can
use slub_min_objects= boot param to override this heuristic. So in
case this change regresses somebody's performance, there's a way
around it and thus the risk is low IMHO"
Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.com
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9cf7a11183 ("mm/slub: make add_full() condition more explicit")
replaced an unnecessarily generic kmem_cache_debug(s) check with an
explicit check of SLAB_STORE_USER and #ifdef CONFIG_SLUB_DEBUG.
We can achieve the same specific check with the recently added
kmem_cache_debug_flags() which removes the #ifdef and restores the
no-branch-overhead benefit of static key check when slub debugging is not
enabled.
Link: https://lkml.kernel.org/r/3ef24214-38c7-1238-8296-88caf7f48ab6@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Abel Wu <wuyun.wu@huawei.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently in CONFIG_SLAB init_on_free happens too late, and heap objects
go to the heap quarantine not being erased.
Lets move init_on_free clearing before calling kasan_slab_free(). In that
case heap quarantine will store erased objects, similarly to CONFIG_SLUB=y
behavior.
Link: https://lkml.kernel.org/r/20201210183729.1261524-1-alex.popov@linux.com
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator expects that page->mapping is NULL for a page being
freed. SLAB and SLUB use the slab_cache field which is in union with
mapping, but before freeing the page, the field is referenced with the
"mapping" name when set to NULL.
It's IMHO more correct (albeit functionally the same) to use the
slab_cache name as that's the field we use in SL*B, and document why we
clear it in a comment (we don't clear fields such as s_mem or freelist, as
page allocator doesn't care about those). While using the 'mapping' name
would automagically keep the code correct if the unions in struct page
changed, such changes should be done consciously and needed changes
evaluated - the comment should help with that.
Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.
Link: https://lkml.kernel.org/r/20201109110654.12547-10-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.
Link: https://lkml.kernel.org/r/20201109110654.12547-5-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When allocating an array of elements, users should check for
multiplication overflow or preferably use one of the provided helpers
like: kmalloc_array().
There's no krealloc_array() counterpart but there are many users who use
regular krealloc() to reallocate arrays. Let's provide an actual
krealloc_array() implementation.
While at it: add some documentation regarding krealloc.
Link: https://lkml.kernel.org/r/20201109110654.12547-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
