IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq() for DT users only.
While at it propagate error code in emac_dev_stop() in case
platform_get_irq_optional() fails.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert am65-cpsw driver and am65-cpsw ethtool to use Phylink APIs
as described at Documentation/networking/sfp-phylink.rst. All calls
to Phy APIs are replaced with their equivalent Phylink APIs.
No functional change intended. Use Phylink instead of conventional
Phylib, in preparation to add support for SGMII/QSGMII modes.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today's implementation of csum_shift() leads to branching based on
parity of 'offset'
000002f8 <csum_block_add>:
2f8: 70 a5 00 01 andi. r5,r5,1
2fc: 41 a2 00 08 beq 304 <csum_block_add+0xc>
300: 54 84 c0 3e rotlwi r4,r4,24
304: 7c 63 20 14 addc r3,r3,r4
308: 7c 63 01 94 addze r3,r3
30c: 4e 80 00 20 blr
Use first bit of 'offset' directly as input of the rotation instead of
branching.
000002f8 <csum_block_add>:
2f8: 54 a5 1f 38 rlwinm r5,r5,3,28,28
2fc: 20 a5 00 20 subfic r5,r5,32
300: 5c 84 28 3e rotlw r4,r4,r5
304: 7c 63 20 14 addc r3,r3,r4
308: 7c 63 01 94 addze r3,r3
30c: 4e 80 00 20 blr
And change to left shift instead of right shift to skip one more
instruction. This has no impact on the final sum.
000002f8 <csum_block_add>:
2f8: 54 a5 1f 38 rlwinm r5,r5,3,28,28
2fc: 5c 84 28 3e rotlw r4,r4,r5
300: 7c 63 20 14 addc r3,r3,r4
304: 7c 63 01 94 addze r3,r3
308: 4e 80 00 20 blr
Seems like only powerpc benefits from a branchless implementation.
Other main architectures like ARM or X86 get better code with
the generic implementation and its branch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Leon removes useless includes from both mlx5 and mlx4
2) Tariq adds node awareness to some object allocations
3) Gal Cleanups and improvements to EEPROM query
4) Paul adds Software steering to Connection Tracking, to speed up
CT Rules insertion.
Paul Blakey Says:
=================
To improve insertion rate, this series allows for using software
steering API directly instead of going through the fs_core layer.
This can be done for CT because it doesn't need fs_core layer extra
facilities, such as autogroups, FTE IDs and modifications (which require
a copy of the flow key/mask). Skipping fs_core layer also allows to
create the software steering objects (dr_* objects) ahead of time and
re-use them for multiple rules, whereas software steering under fs_core
creates them on the fly and discards them. This in turn increased insertion
rate.
The series first introduces a lightweight CT flow steering provider
with the first implementations using fs_core layer, and moves CT to use it.
The next patches implement a provider using software steering directly,
bypassing fs_core, and uses it if software steering is available.
=================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmIq/HEACgkQSD+KveBX
+j7gigf+NLLA+CVqKNRDJKzxsuXR1zgsUdrQDhrPMX5UiBF+eDzYKB2qNlnT7eMy
fjwT0bNbQodShDIYQr5FuS6QnCL+yvVvSpqSVR/7VL1TmZD5MD/IbcydsXQW+OI3
AewFhm29/OblBHVpCPoOLfzgaLf5iK4zPyqy4t2/lBxmpAKb0jddwM3/5MKTCBI1
mTjUwEjrax2Qt2kUiTzXualUd2KJOlDlUrWv7yJUO4irFx9PAm/RiX/XcOeSPhVx
iYua1sdrdOi9jUA6TW1PG1R3wajArSV7ifIn2CzxpblwjTOOe79h6sjXrl2499f0
yfG4BuYTy5WTeCuapGZYDvTx/sDIKA==
=4H+C
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-03-10
1) Leon removes useless includes from both mlx5 and mlx4
2) Tariq adds node awareness to some object allocations
3) Gal Cleanups and improvements to EEPROM query
4) Paul adds Software steering to Connection Tracking, to speed up
CT Rules insertion.
Paul Blakey Says:
=================
To improve insertion rate, this series allows for using software
steering API directly instead of going through the fs_core layer.
This can be done for CT because it doesn't need fs_core layer extra
facilities, such as autogroups, FTE IDs and modifications (which require
a copy of the flow key/mask). Skipping fs_core layer also allows to
create the software steering objects (dr_* objects) ahead of time and
re-use them for multiple rules, whereas software steering under fs_core
creates them on the fly and discards them. This in turn increased insertion
rate.
The series first introduces a lightweight CT flow steering provider
with the first implementations using fs_core layer, and moves CT to use it.
The next patches implement a provider using software steering directly,
bypassing fs_core, and uses it if software steering is available.
=================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query
(get_module_eeprom_by_page) the driver should not try to validate the
query parameters, but just perform the read requested by the userspace.
Recent discussion in the mailing list:
https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The assumption that the first byte in the module mapping dword is the
module number shouldn't be hard-coded in the driver, but come from
mlx5_ifc structs.
While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane'
fields.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The MCIA register supports either 12 or 32 dwords, use the correct value
by querying the capability from the MCAM register.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SMFS dr matchers are processed sequentially in hardware according to
their priorities, and not skipped if empty.
Currently, smfs ct fs creates four predefined dr matchers per ct
table (ct/ct nat) with hardcoded priority. Compared to dmfs ct fs
using autogroups, this might cause additional hops in fastpath for
traffic patterns that match later priorties, even if previous
priorites are empty, e.g user only using ipv6 UDP traffic will
have additional 3 hops.
Create the matchers dynamically, using the highest priority available,
on first rule usage, and remove them on last usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
fs_core layer adds extra book keeping that is either unneeded for CT, or
unused by the underlying software steering, such as allocating FTEs and
FTE ids, saving the match key and mask, and autogroups management.
On top of that, direct steering has a translation layer (fs_dr) from PRM
commands to direct steering objects, for example, creating temporary
dr_action objects. This has a performance impact when dealing
with CT high insertion rate.
To use direct steering (smfs) directly for ct, add a tc ct fs smfs
implementation. Instead of dmfs autogroups, smfs ct fs uses one of 4
predefined dr matchers in CT and CT-NAT tables, for each combination
of tuple ethertype (ipv4/ipv6), and tuple ip_proto (udp/tcp) that
is currently used by nf flow table flow offload.
At rule insertions, validate the flow rule fits one of the predfined
matcher, and insert to it.
To fill the dr_actions of the rule efficiently, create the fwd to post_ct
tbl dr_action at fs init, the count dr_action at counter creation,
and re-use the already pre-allocated modify header dr_action.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a thin layer that exports selected direct steering (dr) API
which will be used by a ct fs implementation in a following
patch.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If sw steering was used to create the table, dr steeering fs creates
a backing dr table for the mlx5 flow table.
Add helper to return this table so it can be used to create matchers and
add rules on it directly instead of passing via eswitch_offloads/fs_core
insertion.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, fs_core layer provides flow steering services to the driver
including: autogroups, allocating FTEs (flow table entries) and FTE ids,
and support of fte action modification. If then software steering is
configured, rule insertion will go through a translation layer from
firmware buffers to software steering objects (see fs_dr.c).
The connection tracking table is a system table that is not directly
controlled by the user and is a very high scale table. These fs_core
services introduces an overhead that may be optimized by using software
steering API directly.
Introduce ct flow steering interface to allow multiple flow steering
providers. Use the new interface to implement the current dmfs (device
managed flow steering) provider which uses fs_core insertion.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The function is node-aware and gets the node as an argument.
Use a node-aware allocation for the doorbell pgdir structure.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no need in include of module.h in the following files.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Alex Elder says:
====================
net: ipa: use bulk interconnect interfaces
The IPA code currently enables and disables interconnects by setting
the bandwidth of each to a non-zero value, or to zero. The
interconnect API now supports enable/disable functions, so we can
use those instead. In addition, the interconnect API provides bulk
interfaces that allow all interconnects to be operated on at once.
This series converts the IPA driver to use the bulk enable and
disable interfaces. In the process it uses some existing data
structures rather than defining new ones.
====================
Link: https://lore.kernel.org/r/20220309192037.667879-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ipa_power structure contains a copy of the IPA device pointer,
so there's no need to pass it to ipa_interconnect_init(). We can
also use that pointer for an error message in ipa_power_enable().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than allocating the interconnect array dynamically, represent
the interconnects with a variable-length array at the end of the
ipa_power structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch used bulk interconnect operations to initialize
IPA interconnects one at a time. This rearranges things to use the
bulk interfaces as intended--on all interconnects together. As a
result ipa_interconnect_init_one() and ipa_interconnect_exit_one()
are no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use of_icc_bulk_get() and icc_bulk_put(), icc_bulk_set_bw(), and
icc_bulk_enable() and icc_bulk_disable() to initialize individual
IPA interconnects. Those functions already log messages in the
event of error so we don't need to.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The power interconnect array is now an array of icc_bulk_data
structures, which is what the interconnect bulk enable and disable
functions require.
Get rid of ipa_interconnect_enable() and ipa_interconnect_disable(),
and just call icc_bulk_enable() and icc_bulk_disable() instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The interconnect framework now provides the ability to enable and
disable interconnects without having to change their recorded
"enabled" bandwidth value. Use this mechanism, rather than setting
the bandwidth values to zero and non-zero respectively to disable
and enable the IPA interconnects.
Disable each interconnect before setting its "enabled" average and
peak bandwidth values. Thereafter, enable and disable interconnects
when required rather than setting their bandwidths.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ipa_interconnect structure contains an icc_path pointer, plus an
average and peak bandwidth value. Other than the interconnect name,
this matches the icc_bulk_data structure exactly.
Use the icc_bulk_data structure in place of the ipa_interconnect
structure, and add an initialization of its name field. Then get
rid of the now unnecessary ipa_interconnect structure definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The serial port driver attempts to test for correct THRE behavior
on startup. However, it does this by disabling interrupts, and
then intentionally trying to trigger an interrupt in order to see
if the IIR bit is set in the UART.
However, in this FPGA design, the UART interrupt is generated
through the MSI vector, so when interrupts are re-enabled after
the test, the DMAR-IR reports an unhandled IRTE entry, since
no irq handler is installed at this point - it is installed
after the test.
This only happens on the /second/ open of the UART, since on the
first open, the x86_vector has installed and activated by the
driver probe, and is correctly handled. When the serial port is
closed for the first time, this vector is deactivated and removed,
leading to this error.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220309223427.34745-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous commits introduced AF_XDP zero-copy support, in which
we need register different mem model for xdp_rxq when AF_XDP
zero-copy is enabled or not. And this should be done after xdp_rxq
info is registered, which is not needed for ctrl port, otherwise
there complaints warnings: "Missing register, driver bug".
Fix this by not registering mem model for ctrl port, just like we
don't register xdp_rxq info for ctrl port.
Fixes: 6402528b7a0b ("nfp: xsk: add AF_XDP zero-copy Rx and Tx support")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220309135533.10162-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-03-09
This series contains updates to ice driver only.
Martyna implements switchdev filtering on inner EtherType field for
tunnels.
Marcin adds reporting of slowpath statistics for port representors.
Jonathan Toppins changes a non-fatal link error message from warning to
debug.
Maciej removes unnecessary checks in ice_clean_tx_irq().
Amritha adds support for ADQ to match outer destination MAC for tunnels.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for outer dest MAC for ADQ tunnels
ice: avoid XDP checks in ice_clean_tx_irq()
ice: change "can't set link" message to dbg level
ice: Add slow path offload stats on port representor in switchdev
ice: Add support for inner etype in switchdev
====================
Link: https://lore.kernel.org/r/20220309190315.1380414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.
Prevent the problem from occurring by checking the length
of the property list before adding new entries.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Few years ago OVS user space made a strange choice in the commit [1]
to define types only valid for the user space inside the copy of a
kernel uAPI header. '#ifndef __KERNEL__' and another attribute was
added later.
This leads to the inevitable clash between user space and kernel types
when the kernel uAPI is extended. The issue was unveiled with the
addition of a new type for IPv6 extension header in kernel uAPI.
When kernel provides the OVS_KEY_ATTR_IPV6_EXTHDRS attribute to the
older user space application, application tries to parse it as
OVS_KEY_ATTR_PACKET_TYPE and discards the whole netlink message as
malformed. Since OVS_KEY_ATTR_IPV6_EXTHDRS is supplied along with
every IPv6 packet that goes to the user space, IPv6 support is fully
broken.
Fixing that by bringing these user space attributes to the kernel
uAPI to avoid the clash. Strictly speaking this is not the problem
of the kernel uAPI, but changing it is the only way to avoid breakage
of the older user space applications at this point.
These 2 types are explicitly rejected now since they should not be
passed to the kernel. Additionally, OVS_KEY_ATTR_TUNNEL_INFO moved
out from the '#ifdef __KERNEL__' as there is no good reason to hide
it from the userspace. And it's also explicitly rejected now, because
it's for in-kernel use only.
Comments with warnings were added to avoid the problem coming back.
(1 << type) converted to (1ULL << type) to avoid integer overflow on
OVS_KEY_ATTR_IPV6_EXTHDRS, since it equals 32 now.
[1] beb75a40fdc2 ("userspace: Switching of L3 packets in L2 pipeline")
Fixes: 28a3f0601727 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Link: https://lore.kernel.org/netdev/3adf00c7-fe65-3ef4-b6d7-6d8a0cad8a5f@nvidia.com
Link: beb75a40fd
Reported-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220309222033.3018976-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This enables non-standard MTUs on a per-port basis, with the overall
frame size set based on the CPU port.
When the MTU is not changed, this should have no effect.
Long packets crash the switch with MTUs of greater than 2526, so the
maximum is limited for now. Medium packets are sometimes dropped (e.g.
TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value
of 2400 seems safe.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmIpyLkTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXU2LB/oDq++xqO2WjiRgj//tzyz8MIUlDcR6
WsLGiXUj3XOhj/hX11RcttIKceYf2Tzen9skbabOe3zwBOqutqiXkLRjPKZ6EVpX
sZsVq0J+Bgz8IeE3u+qAHDt2ycc4AOMrVefkssXSn+r/06cKLZKnalw+8ioce4cu
4GyR6Bfm59aY1tdL3p+KcoPwR78FQsTxrbUAYyJ9UlfagZvc6uWe42hk6JBsXjBp
eU/1UvnUuxhHsCetovVUbmRXFnsyWOIbyKrcPMsn+agUDNP+gASbP3lL710w812v
8DS79MllMe3OFPpWi4Yrg/ihG0m5o4n1OVSWZkyKvpSE0rIpn3lTY2gB
=u2iw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-10
The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.
The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.
Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.
2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.
The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.
* tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits)
can: gs_usb: add VID/PID for ABE CAN Debugger devices
can: gs_usb: add VID/PID for CES CANext FD devices
can: gs_usb: add extended bt_const feature
can: gs_usb: activate quirks for CANtact Pro unconditionally
can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
can: gs_usb: add usb quirk for NXP LPC546xx controllers
can: gs_usb: add CAN-FD support
can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
can: gs_usb: support up to 3 channels per device
can: gs_usb: gs_usb_probe(): introduce udev and make use of it
can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
can: gs_usb: document the USER_ID feature
can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
can: gs_usb: add HW timestamp mode bit
can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
can: gs_usb: rewrap error messages
can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
can: gs_usb: sort include files alphabetically
can: gs_usb: fix checkpatch warning
...
====================
Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work,
make connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WfAR
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 4a48ef70b93b8 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871] __schedule+0x2d1/0x830
[20976.219364] schedule+0x35/0xa0
[20976.222510] schedule_preempt_disabled+0xa/0x10
[20976.227043] __mutex_lock.isra.7+0x310/0x420
[20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079] ib_register_device+0x40d/0x580 [ib_core]
[20976.266139] irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409] irdma_probe+0x2c1/0x360 [irdma]
[20976.285691] auxiliary_bus_probe+0x45/0x70
[20976.289790] really_probe+0x1f2/0x480
[20976.298509] driver_probe_device+0x49/0xc0
[20976.302609] bus_for_each_drv+0x79/0xc0
[20976.306448] __device_attach+0xdc/0x160
[20976.310286] bus_probe_device+0x9d/0xb0
[20976.314128] device_add+0x43c/0x890
[20976.321287] __auxiliary_device_add+0x43/0x60
[20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109] ice_service_task+0xd0c/0xed0 [ice]
[20976.342591] process_one_work+0x1a7/0x360
[20976.350536] worker_thread+0x30/0x390
[20976.358128] kthread+0x10a/0x120
[20976.365547] ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921] __schedule+0x2d1/0x830
[20976.452414] schedule+0x35/0xa0
[20976.455559] schedule_preempt_disabled+0xa/0x10
[20976.460090] __mutex_lock.isra.7+0x310/0x420
[20976.464364] device_del+0x36/0x3c0
[20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288] notifier_call_chain+0x47/0x70
[20976.481386] __netdev_upper_dev_link+0x18b/0x280
[20976.489845] bond_enslave+0xe05/0x1790 [bonding]
[20976.494475] do_setlink+0x336/0xf50
[20976.502517] __rtnl_newlink+0x529/0x8b0
[20976.543441] rtnl_newlink+0x43/0x60
[20976.546934] rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238] netlink_rcv_skb+0x4c/0x120
[20976.563079] netlink_unicast+0x196/0x230
[20976.567005] netlink_sendmsg+0x204/0x3d0
[20976.570930] sock_sendmsg+0x4c/0x50
[20976.574423] ____sys_sendmsg+0x1eb/0x250
[20976.586807] ___sys_sendmsg+0x7c/0xc0
[20976.606353] __sys_sendmsg+0x57/0xa0
[20976.609930] do_syscall_64+0x5b/0x1a0
[20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
whether it was already cleared by ice_clear_rdma_cap(). If so then
aux device is unplugged.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.
According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.
Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:
"Supports Wake-on: gsf"
which is false.
Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:
"Supports Wake-on: d"
This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.
We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.
Fixes: 95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Remove kernel log prints on FW events regarding FW pages management
and replace that with debugfs entries to track FW pages management commands
failures and general stats, we do that for all FW commands in general since
it's the same effort to do so under the already existing debugfs entry for
FW commands.
2) Add support for ConnectX-7 Software managed steering, in other words STEv2
which shares a lot in common with STE V1, the difference is in specific
offsets in the devices, the logic is almost the same, thus we implement
STEv1 and STEv2 in the same file.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmIpHREACgkQSD+KveBX
+j7Ubwf/WDV1+UDECznQtWAZ3DMmSlVlfUDgxrdaNiJ1BRFEk4fg3yBLyEtYlVBR
Rw0ZrtkuZo31Iu92P2rvOlExmMJuGNBMpBpNwXN1TZuG43DKMUY3RVHB27O9Y9zQ
z4BOhYFVu4Bhn7euO1Icu9YlDdVWGssb0sjAN7iFyCghzA6VeuPpJxYPfNgQNZrx
frHLKTW2tHqKvCCIv7oxZpG2zcg0wyV4QgG0P2XOYddRDTCPZTbLGrQEaCos0WcM
uKy5vJWjbW1lxxOW2S7uYSujdTttkpC/ltv1Pe47QFZsCAtGV/P5S34D170Lu/t5
J1suur834H6o2qm9hrDj7QDwcjwsYw==
=f7Ae
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-03-09
1) Remove kernel log prints on FW events regarding FW pages management
and replace that with debugfs entries to track FW pages management commands
failures and general stats, we do that for all FW commands in general since
it's the same effort to do so under the already existing debugfs entry for
FW commands.
2) Add support for ConnectX-7 Software managed steering, in other words STEv2
which shares a lot in common with STE V1, the difference is in specific
offsets in the devices, the logic is almost the same, thus we implement
STEv1 and STEv2 in the same file.
* tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: DR, Add support for ConnectX-7 steering
net/mlx5: DR, Refactor ste_ctx handling for STE v0/1
net/mlx5: DR, Rename action modify fields to reflect naming in HW spec
net/mlx5: DR, Fix handling of different actions on the same STE in STEv1
net/mlx5: DR, Remove unneeded comments
net/mlx5: DR, Add support for matching on Internet Header Length (IHL)
net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior
net/mlx5: Add debugfs counters for page commands failures
net/mlx5: Add pages debugfs
net/mlx5: Move debugfs entries to separate struct
net/mlx5: Change release_all_pages cap bit location
net/mlx5: Remove redundant error on reclaim pages
net/mlx5: Remove redundant error on give pages
net/mlx5: Remove redundant notify fail on give pages
net/mlx5: Add command failures data to debugfs
net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act()
====================
Link: https://lore.kernel.org/r/20220309213755.610202-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=t7YQ
-----END PGP SIGNATURE-----
Merge tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix for a regression that occured in this merge window"
* tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block:
block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection
Here are 3 small fixes for staging drivers for 5.17-rc8 or -final, which
ever comes next.
They resolve some reported problems:
- rtl8723bs wifi driver deadlock fix for reported problem that
is a revert of a previous patch. Also a documentation fix is
added so that the same problem hopefully can not come back
again.
- gdm724x driver use-after-free fix for a reported problem.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYipbng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylv1wCdHRKRV93Okg/hqsni2j0p6SW3L04An0khguG9
/PtTtdJ+WxqC7b52UFA2
=JqQt
-----END PGP SIGNATURE-----
Merge tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small fixes for staging drivers for 5.17-rc8 or -final,
which ever comes next.
They resolve some reported problems:
- rtl8723bs wifi driver deadlock fix for reported problem that is a
revert of a previous patch. Also a documentation fix is added so
that the same problem hopefully can not come back again.
- gdm724x driver use-after-free fix for a reported problem.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Improve the comment explaining the locking rules
staging: rtl8723bs: Fix access-point mode deadlock
staging: gdm724x: fix use after free in gdm_lte_rx()
