IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function, which centers the debugfs files
management on the drm_device instead of drm_minor.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-6-mcanal@igalia.com
Currently, vc4 has its own debugfs infrastructure that adds the debugfs
files on drm_dev_register(). With the introduction of the new debugfs,
functions, replace the vc4 debugfs structure with the DRM debugfs
device-centered function, drm_debugfs_add_file().
Moreover, remove the explicit error handling of debugfs related functions,
considering that the only failure mode is -ENOMEM and also that error
handling is not recommended for debugfs functions, as pointed out in [1].
[1] https://lore.kernel.org/all/YWAmZdRwnAt6wh9B@kroah.com/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-5-mcanal@igalia.com
Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.
So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com
Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function in all DRM core files, centering the
debugfs files management on the drm_device instead of drm_minor.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-3-mcanal@igalia.com
Introduce the ability to track requests for the addition of DRM debugfs
files at any time and have them added all at once during
drm_dev_register().
Drivers can add DRM debugfs files to a device-managed list and, during
drm_dev_register(), all added files will be created at once.
Now, the drivers can use the functions drm_debugfs_add_file() and
drm_debugfs_add_files() to create DRM debugfs files instead of using the
drm_debugfs_create_files() function.
Co-developed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-2-mcanal@igalia.com
Ast hardware scans out the primary plane from video memory, which
is in I/O-memory space. Hence init the damage handler's iosys_map
pointer as I/O memory.
Not all platforms support accessing I/O memory as system memory,
although it's usually not a problem in ast's x86-based systems.
The error report is at [1].
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/lkml/202212170111.eInM0unS-lkp@intel.com/T/#u # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20221216193005.30280-1-tzimmermann@suse.de
A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.
Issue identified using platform_get_irq.cocci coccicheck script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y5XhPJ39ipMCcctq@qemulion
As v3d_lookup_bos() performs the same steps as drm_gem_objects_lookup(),
replace the explicit code in v3d to simply use the DRM function.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221205135538.3545051-3-mwen@igalia.com
When v3d_lookup_bos fails to `allocate validated BO pointers`,
job->bo_count was already set to args->bo_count, but job->bo points to
NULL. In this scenario, we must verify that job->bo is not NULL before
iterating on it to proper clean up a job. Also, drm_gem_object_put
already checks that the object passed is not NULL, doing the job->bo[i]
checker redundant.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221205135538.3545051-2-mwen@igalia.com
ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.
drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.
Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de
dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:
drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.
Compile-tested only.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
After commit 64ff18911878, struct csc_coef_rgb2yuv is not used any more
and can be removed as well.
Fixes: 64ff18911878 ("drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014024810.21675-1-yuancan@huawei.com
There was a long-standing bug from a typo that created 2 ARGB1555 and
ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted
me to this issue.
According to the Supported Pixel Data formats table we have the later
entries should have been for Alpha-X instead.
Signed-off-by: Randolph Sapp <rs@ti.com>
Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com
If an MST stream is enabled on a disconnected sink, the payload for the
stream is not created and the MST manager's payload count/next start VC
slot is not updated. Since the payload's start VC slot may still contain
a valid value (!= -1) the subsequent disabling of such a stream could
cause an incorrect decrease of the payload count/next start VC slot in
drm_dp_remove_payload() and hence later payload additions will fail.
Fix the above by marking the payload as invalid in the above case, so
that it's skipped during payload removal. While at it add a debug print
for this case.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-3-imre.deak@intel.com
After an error during receiving a packet for a multi-packet DP MST
sideband message, the state tracking which packets have been received
already is not reset. This prevents the reception of subsequent down
messages (due to the pending message not yet completed with an
end-of-message-transfer packet).
Fix the above by resetting the reception state after a packet error.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-2-imre.deak@intel.com
If the sink gets disconnected during receiving a multi-packet DP MST AUX
down-reply/up-request sideband message, the state keeping track of which
packets have been received already is not reset. This results in a failed
sanity check for the subsequent message packet received after a sink is
reconnected (due to the pending message not yet completed with an
end-of-message-transfer packet), indicated by the
"sideband msg set header failed"
error.
Fix the above by resetting the up/down message reception state after a
disconnect event.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-1-imre.deak@intel.com
Add support for the IT6610 HDMI encoder.
The hardware is very similar, and therefore the driver did not require
too many changes. Some bits are only available on the IT66121, and
vice-versa. Also, the IT6610 requires specific polarities on the DE and
pixel lines.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214130131.12962-1-paul@crapouillou.net
The DDC FIFO was cleared before the loop in it66121_get_edid_block(),
and at the beginning of each iteration; which means that it did not have
to be cleared before the loop.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-8-paul@crapouillou.net
The DDC error IRQs will fire on the IT6610 every time the FIFO is empty,
which is not very helpful. To resolve this, we can simply disable them,
and handle DDC errors in it66121_wait_ddc_ready().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-7-paul@crapouillou.net
The function it66121_wait_ddc_ready() would previously read the status
register until "true", which means it never actually polled anything and
would just read the register once.
Now, it will properly wait until the DDC hardware is ready or until it
reported an error.
The 'busy' variable was also renamed to 'error' since these bits are set
on error and not when the DDC hardware is busy.
Since the DDC ready function is now working properly, the msleep(20) can
be removed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-6-paul@crapouillou.net
Simplify the code of the driver by using
devm_regulator_bulk_get_enable(), which will handle powering up the
regulators, and disabling them on probe error or module removal.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-3-paul@crapouillou.net
Currently there are no "upstream" users. So, no existing users to break.
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-2-allen.chen@ite.com.tw
Add caching when EDID is read, and invalidate the cache until the
bridge detects HPD low or sink count changes on HPD_IRQ.
It takes 1.2s for IT6505 bridge to read a 3-block EDID, and skipping
one EDID read would be a notable difference on user experience.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115112720.911158-1-treapking@chromium.org
This fixes PLL being unable to lock, and is derived from an equivalent
downstream commit.
Available LT9611 documentation does not list this register, neither does
LT9611UXC (which is a different chip).
This commit has been confirmed to fix HDMI output on DragonBoard 845c.
Suggested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org
Post_disable was sending the D-PHY sequence to put any device
into ULPS suspend mode, and then cutting power to the DSI block.
The power-on reset state of the DSI block is for DSI to be in
an operational state, not ULPS, so it then never sent the sequence
for exiting ULPS. Any attached device that didn't have an external
reset therefore remained in ULPS / standby, and didn't function.
Use of ULPS isn't well specified in DRM, therefore remove entering
it to avoid the above situation.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-6-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Remove the encoder functions, and create a bridge attached to
this dumb encoder which implements the same functionality.
As a bridge has state which an encoder doesn't, we need to
add the state management functions as well.
As there is no bridge atomic_mode_set, move the initialisation
code that was in mode_set into _pre_enable.
The code to actually enable and disable sending video are split
from the general control into _enable and _disable.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-5-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The atomic calls are preferred as the non-atomic ones
are deprecated. In preparation for conversion to a bridge,
switch to the atomic calls.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-4-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Splitting the bridge chain fails for atomic bridges as the
framework can't add the relevant state in
drm_atomic_add_encoder_bridges.
The chain was split because we needed to power up before
calling pre_enable, but that is now done in mode_set, and will
move into the framework.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-3-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Breaking the bridge chain does not work for atomic bridges/panels
and generally causes issues.
We need to initialise the DSI host before the bridge pre_enables
are called, so move that to encoder_mode_set in the same way that
dw-mipi-dsi does.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-2-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
In preparation for converting the encoder to being a bridge,
rename the variable holding the next bridge in the chain to
out_bridge, so that our bridge can be called bridge.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-1-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add a pair of pm_runtime_get_if_in_use and pm_runtime_put_sync in the
interrupt handler to make sure the bridge won't be powered off during
the interrupt handlings. Also remove the irq_lock mutex because it's not
guarding anything now.
Fixes: ab28896f1a83 ("drm/bridge: it6505: Improve synchronization between extcon subsystem")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109095227.3320919-1-treapking@chromium.org
Add documentation for the new io-supply property, which specifies the
regulator for the I/O voltage supply on platforms where the panel
panel power and I/O supplies are separate.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-4-otto.pflueger@abscue.de
To support platforms with a separate I/O voltage supply, set the new
io_regulator property along with the regulator property of the DBI
device. Read the I/O supply from a new "io-supply" device tree
property.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-3-otto.pflueger@abscue.de
The MIPI DBI specification defines separate vdd (panel power) and
vddi (I/O voltage) supplies. Displays that require different voltages
for the different supplies do exist, so the supplies cannot be
combined into one as they are now. Add a new io_regulator property to
the mipi_dbi_dev struct which can be set by the panel driver along
with the regulator property.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-2-otto.pflueger@abscue.de
Sometimes kernel may resume back quickly after suspend,
and DRM not call .mode_set() to re-config
display timing before calling .atomic_enable(), bridge
driver with this patch to keep last configure timing.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209030418.713935-1-xji@analogixsemi.com
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-36-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-29-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
