IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.
Add support for the MT6370 ADC driver for system monitoring, including
charger current, voltage, and temperature.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Link: https://lore.kernel.org/r/81ec58ae89030e48508d6810396de2679c40d26c.1665488982.git.chiaen_wu@richtek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding support for max11410 24-bit, 1.9ksps delta-sigma adc which
has 3 differential reference and 10 differential channel inputs.
Inputs and references can be buffered internally. Inputs can also
be amplified with internal PGA.
Device has four digital filter modes: FIR50/60, FIR50, FIR60 and SINC4.
FIR 50Hz and 60Hz rejections can be enabled/disabled separately.
Digital filter selection affects sampling frequency range so driver
has to consider the configured filter when configuring sampling frequency.
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20221003105903.229-2-Ibrahim.Tilki@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004115642.63749-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improve example by: dropping unrelated properties (status and cs-gpios)
and using generic node name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reference the spi-peripheral-props.yaml schema to allow using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-1-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-13-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-12-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to drop the internal lock usage we needed two different things:
1) The first place where 'mlock' was being used was a typical case where
iio_device_claim_direct_mode() fits perfectly.
2) In the second case, it was being used to prevent concurrent accesses
to the device and shared data but nothing was being enforced with
regards to buffering (i.e, there was nothing preventing from changing
the conversion mode while buffering). Hence, in this case, a new lock
was introduced in the state structure.
Note that the goal is not to introduce any functional change and that is
the reason why a new lock was introduced to guarantee 2).
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a precursor change to make it simpler to remove the 'mlock'
usage. Having the code in it's own helper function, also makes it easier
to read the error paths.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-10-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-9-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221004134909.1692021-8-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-7-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-6-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'mlock' was being grabbed when setting the device frequency. In order to
not introduce any functional change a new lock is added. With that in
mind, the lock also needs to be grabbed in the places where 'mlock' is
since it was also being used to protect st->config against the current
device state.
On the other places the lock was being used, we can just drop
it since we are only doing one i2c bus read/write which is already
safe.
While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ad7124 has no spi_device_id for adi,ad7124-4
SPI driver ad7124 has no spi_device_id for adi,ad7124-8
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-6-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ad7192 has no spi_device_id for adi,ad7190
SPI driver ad7192 has no spi_device_id for adi,ad7193
SPI driver ad7192 has no spi_device_id for adi,ad7195
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-5-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ad9467 has no spi_device_id for adi,ad9265
SPI driver ad9467 has no spi_device_id for adi,ad9434
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-4-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver sca3300 has no spi_device_id for murata,scl3300
Add spi_device_id entries to silence the warning, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
Link: https://lore.kernel.org/r/20220921163620.805879-3-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ads131e08 has no spi_device_id for ti,ads131e04
SPI driver ads131e08 has no spi_device_id for ti,ads131e06
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-2-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927064841.319291-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add read/write attribute for proximity integration time, and read
attribute for available proximity integration times for the vcnl4040
chip.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220926091900.1724105-3-marten.lindahl@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As the vcnl4040 and vcnl4200 chip uses runtime power management for
turning the ambient light and proximity sensors on/off, it overwrites
the entire register each time. In ALS_CONF register bit fields ALS_IT,
ALS_PERS, ALS_INT_EN are overwritten. In PS_CONF1 register bit fields
PS_DUTY, PS_PERS, PS_IT, PS_HD, and PS_INT are overwritten.
Add functions for preserving the affected bit fields when changing power
state.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220926091900.1724105-2-marten.lindahl@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADMV8818_SW_IN_WR0_MSK and ADMV8818_SW_OUT_WR0_MSK have 3 bits,
which means a length of 8, but freq_range_hpf and freq_range_lpf
array size is 4, may end up reading 4 elements beyond the end of
those arrays.
Check value first before access freq_range_hpf and freq_range_lpf
to harden against the hardware allowing out of range values.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20220922115848.1800021-1-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for setting the Programmable Gain Amplifiers by adjust the
scale value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220922194639.1118971-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current EINVAL value is more applicable to embedded library, where
user can actually put the fixed value to the sensor. In case of the
driver if the value of the channel is invalid it is better in inform
userspace that Channel was out of range as that implies more to internal
driver error than invalid input. It also makes for easier debugging of
where the error comes from during the development.
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/565d4df2592d751dc0f40908f2569b7c9af8e56e.1663834141.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The sensor can operate in lower power modes and even make measurements when
in those lower powered modes. The decision was taken that if measurement
is not requested within 2 seconds the sensor will remain in SLEEP_STEP
power mode, where measurements are triggered on request with setting the
start of measurement bit (SOB). In this mode the measurements are taking
a bit longer because we need to start it and complete it. Currently, in
continuous mode we read ready data and this mode is activated if sensor
measurement is requested within 2 seconds. The suspend timeout is
increased to 6 seconds (instead of 3 before), because that enables more
measurements in lower power mode (SLEEP_STEP), with the lowest refresh
rate (2 seconds).
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/be405068f081f2d518843897b13cd0289c280b5d.1663834141.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220921023915.47300-1-yuancan@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop 'mlock' usage by making use of iio_device_claim_direct_mode().
This change actually makes sure we cannot do a single conversion while
buffering is enable. Note there was a potential race in the previous
code since we were only acquiring the lock after checking if the bus is
enabled.
Fixes: af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: <Stable@vger.kernel.org> #No rush as race is very old.
Link: https://lore.kernel.org/r/20220920112821.975359-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A use-after-free bugfix in the smscufx driver and various minor
error path fixes, smaller build fixes, sysfs fixes and
typos in comments in the stifb, sisfb, da8xxfb, xilinxfb, sm501fb,
gbefb and cyber2000fb drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY16ulQAKCRD3ErUQojoP
XyvDAP9ZhF0SjbnRBwHAU9ZYC7XpCwcoqBRWFCCU7mmmbkXrJAD9F1LcEwZPGyn/
5/hiTwzM8ioJz6HB3r04M88bl4b1cwI=
=SnCh
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A use-after-free bugfix in the smscufx driver and various minor error
path fixes, smaller build fixes, sysfs fixes and typos in comments in
the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
drivers"
* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: cyber2000fb: fix missing pci_disable_device()
fbdev: sisfb: use explicitly signed char
fbdev: smscufx: Fix several use-after-free bugs
fbdev: xilinxfb: Make xilinxfb_release() return void
fbdev: sisfb: fix repeated word in comment
fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
fbdev: da8xx-fb: Fix error handling in .remove()
fbdev: MIPS supports iomem addresses
Here are some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second
fix to get it right.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY16EAA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloyQCdFV2qLAb6IK+fx9rS8ThuxT13O5AAn1ec8Fd6
BSWYN1TIO6r83khtJ8y4
=34Sj
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
Here are a few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard
work he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't
relevant for 6.1-final, as it is a new feature and people are
still reviewing and modifying it.
All of these have been in the linux-next tree with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY16Evg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylP7ACbBFKioz4LgbVYYY5f12qJ3MfbfBYAn1EKSYUr
jgJxsPv1LeTTicOqGIy9
=Jks2
-----END PGP SIGNATURE-----
Merge tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
-----BEGIN PGP SIGNATURE-----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=IbVz
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
-----BEGIN PGP SIGNATURE-----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=zS3P
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
-----BEGIN PGP SIGNATURE-----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=/RPn
-----END PGP SIGNATURE-----
Merge tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- use after free fix for reconnect race
- two memory leak fixes
* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free caused by invalid pointer `hostname`
cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()
-----BEGIN PGP SIGNATURE-----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=dZjo
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"One fix from Jean-Philippe Brucker, addressing a regression in which
early boot code on ARM64 would use the non-_early variant of the
arch_get_random family of functions, resulting in the architectural
random number generator appearing unavailable during that early phase
of boot.
The fix simply changes arch_get_random*() to arch_get_random*_early().
This distinction between these two functions is a bit of an old wart
I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
_early variant, so that one function does the right thing in all
contexts without overhead"
* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use arch_get_random*_early() in random_init()
