IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Clear the 'disable resets' flag to allow GuC to reset hung contexts
(detected via pre-emption timeout).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-18-matthew.brost@intel.com
It is impossible to seal all race conditions of resets occurring
concurrent to other operations. At least, not without introducing
excesive mutex locking. Instead, don't complain if it occurs. In
particular, don't complain if trying to send a H2G during a reset.
Whatever the H2G was about should get redone once the reset is over.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-17-matthew.brost@intel.com
The driver must provide GuC with a list of mmio registers
that should be saved/restored during a GuC-based engine reset.
Unfortunately, the list must be dynamically allocated as its size is
variable. That means the driver must generate the list twice - once to
work out the size and a second time to actually save it.
v2:
(Alan / CI)
- GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-16-matthew.brost@intel.com
The GuC can implement execution qunatums, detect hung contexts and
other such things but it requires the timer expired interrupt to do so.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-15-matthew.brost@intel.com
GuC will notify the driver, via G2H, if it fails to
reset an engine. We recover by resorting to a full GPU
reset.
v2:
(John Harrison):
- s/drm_dbg/drm_err
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-14-matthew.brost@intel.com
GuC will issue a reset on detecting an engine hang and will notify
the driver via a G2H message. The driver will service the notification
by resetting the guilty context to a simple state or banning it
completely.
v2:
(John Harrison)
- Move msg[0] lookup after length check
v3:
(John Harrison)
- s/drm_dbg/drm_err
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-13-matthew.brost@intel.com
The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.
Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).
v2:
(Michel / John H)
- INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
Add disable GuC interrupts to intel_guc_sanitize(). Part of this
requires moving the guc_*_interrupt wrapper function into header file
intel_guc.h.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-11-matthew.brost@intel.com
If submission is disabled by the backend for any reason, reset the GPU
immediately in the heartbeat code as the backend can't be reenabled
until the GPU is reset.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-10-matthew.brost@intel.com
Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.
With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.
v2:
(Michal)
- Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
(John H)
- Split into a series of smaller patches
v4:
(John H)
- Fix typo
- Add braces around if statements in reset code
v5:
(Checkpatch)
- Fix warnings
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
Move active request tracking to a backend vfunc rather than assuming all
backends want to do this in the manner. In the of case execlists /
ring submission the tracking is on the physical engine while with GuC
submission it is on the context.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com
With GuC virtual engines the physical engine which a request executes
and completes on isn't known to the i915. Therefore we can't attach a
request to a physical engines breadcrumbs. To work around this we create
a single breadcrumbs per engine class when using GuC submission and
direct all physical engine interrupts to this breadcrumbs.
v2:
(John H)
- Rework header file structure so intel_engine_mask_t can be in
intel_engine_types.h
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-6-matthew.brost@intel.com
Update the bonding extension to return -ENODEV when using GuC submission
as this extension fundamentally will not work with the GuC submission
interface.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-5-matthew.brost@intel.com
Hold a reference to the intel_context over life of an i915_request.
Without this an i915_request can exist after the context has been
destroyed (e.g. request retired, context closed, but user space holds a
reference to the request from an out fence). In the case of GuC
submission + virtual engine, the engine that the request references is
also destroyed which can trigger bad pointer dref in fence ops (e.g.
i915_fence_get_driver_name). We could likely change
i915_fence_get_driver_name to avoid touching the engine but let's just
be safe and hold the intel_context reference.
v2:
(John Harrison)
- Update comment explaining how GuC mode and execlists mode deal with
virtual engines differently
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-4-matthew.brost@intel.com
The serial number tracking of engines happens at the backend of
request submission and was expecting to only be given physical
engines. However, in GuC submission mode, the decomposition of virtual
to physical engines does not happen in i915. Instead, requests are
submitted to their virtual engine mask all the way through to the
hardware (i.e. to GuC). This would mean that the heart beat code
thinks the physical engines are idle due to the serial number not
incrementing. Which in turns means hangcheck does not work for
GuC virtual engines.
This patch updates the tracking to decompose virtual engines into
their physical constituents and tracks the request against each. This
is not entirely accurate as the GuC will only be issuing the request
to one physical engine. However, it is the best that i915 can do given
that it has no knowledge of the GuC's scheduling decisions.
Downside of this is that all physical engines constituting a GuC
virtual engine will be periodically unparked (even during just a single
context executing) in order to be pinged with a heartbeat request.
However the power and performance cost of this is not expected to be
measurable (due low frequency of heartbeat pulses) and it is considered
an easier option than trying to make changes to GuC firmware.
v2:
(Tvrtko)
- Update commit message
- Have default behavior if no vfunc present
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com
Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.
v2: Update to work with proto-ctx
v3:
(Daniele)
- Drop include, add comment to intel_virtual_engine_has_heartbeat
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com
EHL and JSL add the 'Bypass LLC' MOCS entry, which should make it
possible for userspace to bypass the GTT caching bits set by the kernel,
as per the given object cache_level. This is troublesome since the heavy
flush we apply when first acquiring the pages is skipped if the kernel
thinks the object is coherent with the GPU. As a result it might be
possible to bypass the cache and read the contents of the page directly,
which could be stale data. If it's just a case of userspace shooting
themselves in the foot then so be it, but since i915 takes the stance of
always zeroing memory before handing it to userspace, we need to prevent
this.
v2: this time actually set cache_dirty in put_pages()
v3: move to get_pages() which looks simpler
BSpec: 34007
References: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-2-matthew.auld@intel.com
Try to document the object caching related bits, like cache_coherent and
cache_dirty.
v2(Ville):
- As pointed out by Ville, fix the completely incorrect assumptions
about the "partial" coherency on shared LLC platforms.
v3(Daniel):
- Fix nonsense about "dirtying" the cache with reads.
v4(Daniel):
- Various improvements, including adding some more details for WT.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-1-matthew.auld@intel.com
Until we support p2p dma or as a complement to that, migrate data
to system memory at dma-buf attach time if possible.
v2:
- Rebase on dynamic exporter. Update the igt_dmabuf_import_same_driver
selftest to migrate if we are LMEM capable.
v3:
- Migrate also in the pin() callback.
v4:
- Migrate in attach
v5: (jason)
- Lock around the migration
v6: (jason)
- Move the can_migrate check outside the lock
- Rework the selftests to test more migration conditions. In
particular, SMEM, LMEM, and LMEM+SMEM are all checked.
v7: (mauld)
- Misc style nits
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-9-jason@jlekstrand.net
If our exported dma-bufs are imported by another instance of our driver,
that instance will typically have the imported dma-bufs locked during
dma_buf_map_attachment(). But the exporter also locks the same reservation
object in the map_dma_buf() callback, which leads to recursive locking.
So taking the lock inside _pin_pages_unlocked() is incorrect.
Additionally, the current pinning code path is contrary to the defined
way that pinning should occur.
Remove the explicit pin/unpin from the map/umap functions and move them
to the attach/detach allowing correct locking to occur, and to match
the static dma-buf drm_prime pattern.
Add a live selftest to exercise both dynamic and non-dynamic
exports.
v2:
- Extend the selftest with a fake dynamic importer.
- Provide real pin and unpin callbacks to not abuse the interface.
v3: (ruhl)
- Remove the dynamic export support and move the pinning into the
attach/detach path.
v4: (ruhl)
- Put pages does not need to assert on the dma-resv
v5: (jason)
- Lock around dma_buf_unmap_attachment() when emulating a dynamic
importer in the subtests.
- Use pin_pages_unlocked
v6: (jason)
- Use dma_buf_attach instead of dma_buf_attach_dynamic in the selftests
v7: (mauld)
- Use __i915_gem_object_get_pages (2 __underscores) instead of the
4 ____underscore version in the selftests
v8: (mauld)
- Drop the kernel doc from the static i915_gem_dmabuf_attach function
- Add missing "err = PTR_ERR()" to a bunch of selftest error cases
Reported-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-8-jason@jlekstrand.net
Without TTM, we have no such hook so we exit early but this is fine
because we use TTM on all LMEM platforms and, on integrated platforms,
there is no real migration. If we do have the hook, it's better to just
let TTM handle the migration because it knows where things are actually
placed.
This fixes a bug where i915_gem_object_migrate fails to migrate newly
created LMEM objects. In that scenario, the object has obj->mm.region
set to LMEM but TTM has it in SMEM because that's where all new objects
are placed there prior to getting actual pages. When we invoke
i915_gem_object_migrate, it exits early because, from the point of view
of the GEM object, it's already in LMEM and no migration is needed.
Then, when we try to pin the pages, __i915_ttm_get_pages is called
which, unaware of our failed attempt at a migration, places the object
in SMEM. This only happens on newly created objects because they have
this weird state where TTM thinks they're in SMEM, GEM thinks they're in
LMEM, and the reality is that they don't exist at all.
It's better if GEM just always calls into TTM and let's TTM handle
things. That way the lies stay better contained. Once the migration is
complete, the object will have pages, obj->mm.region will be correct,
and we're done lying.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-7-jason@jlekstrand.net
__i915_ttm_get_pages does two things. First, it calls ttm_bo_validate()
to check the given placement and migrate the BO if needed. Then, it
updates the GEM object to match, in case the object was migrated. If
no migration occured, however, we might still have pages on the GEM
object in which case we don't need to fetch them from TTM and call
__i915_gem_object_set_pages. This hasn't been a problem before because
the primary user of __i915_ttm_get_pages is __i915_gem_object_get_pages
which only calls it if the GEM object doesn't have pages.
However, i915_ttm_migrate also uses __i915_ttm_get_pages to do the
migration so this meant it was unsafe to call on an already populated
object. This patch checks i915_gem_object_has_pages() before trying to
__i915_gem_object_set_pages so i915_ttm_migrate is safe to call, even on
populated objects.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-6-jason@jlekstrand.net
Instead of hand-rolling the same three calls in each function, pull them
into an i915_gem_object_create_user helper. Apart from re-ordering of
the placements array ENOMEM check, there should be no functional change.
v2 (Matthew Auld):
- Add the call to i915_gem_flush_free_objects() from
i915_gem_dumb_create() in a separate patch
- Move i915_gem_object_alloc() below the simple error checks
v3 (Matthew Auld):
- Add __ to i915_gem_object_create_user and kerneldoc which warns the
caller that it's not validating anything.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-5-jason@jlekstrand.net
This doesn't really fix anything serious since the chances of a client
creating and destroying a mass of dumb BOs is pretty low. However, it
is called by the other two create IOCTLs to garbage collect old objects.
Call it here too for consistency.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-4-jason@jlekstrand.net
Since we don't allow changing the set of regions after creation, we can
make ext_set_placements() build up the region set directly in the
create_ext and assign it to the object later. This is similar to what
we did for contexts with the proto-context only simpler because there's
no funny object shuffling. This will be used in the next patch to allow
us to de-duplicate a bunch of code. Also, since we know the maximum
number of regions up-front, we can use a fixed-size temporary array for
the regions. This simplifies memory management a bit for this new
delayed approach.
v2 (Matthew Auld):
- Get rid of MAX_N_PLACEMENTS
- Drop kfree(placements) from set_placements()
v3 (Matthew Auld):
- Properly set ext_data->n_placements
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-3-jason@jlekstrand.net
We don't roll them together entirely because there are still a couple
cases where we want a separate can_migrate check. For instance, the
display code checks that you can migrate a buffer to LMEM before it
accepts it in fb_create. The dma-buf import code also uses it to do an
early check and return a different error code if someone tries to attach
a LMEM-only dma-buf to another driver.
However, no one actually wants to call object_migrate when can_migrate
has failed. The stated intention is for self-tests but none of those
actually take advantage of this unsafe migration.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-2-jason@jlekstrand.net
This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other
recent platforms do not depend on this field, so it doesn't make much
sense to keep it generic like that. Instead, just do a mapping from
engine class to HW ID in the single place that is needed.
v2: use macros with the direct register address instead of calculating
from the legacy HW_ID (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com
Implement Xe_HP forcewake handling. While we're at it, let's reorder to
the forcewake assignment if/else ladder to match our usual driver
conventions.
Co-authored-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-6-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the reset
support for them.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-5-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the
interrupt handler support for them.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-4-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the basic
definitions for them.
v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid
unnecessary padding now that we've increased the size of
intel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)
v4:
- Fix graphics_ver typo for VCS4 (should be 12, not 11). (Lucas)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723191024.1553405-1-matthew.d.roper@intel.com
Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.
As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.
Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com
The CPU domain should be static for discrete, and on DG1 we don't need
any flushing since everything is already coherent, so really all this
does is an object wait, for which we have an ioctl. Longer term the
desired caching should be an immutable creation time property for the
BO, which can be set with something like gem_create_ext.
One other user is iris + userptr, which uses the set_domain to probe all
the pages to check if the GUP succeeds, however we now have a PROBE
flag for this purpose.
v2: add some more kernel doc, also add the implicit rules with caching
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
On Xe_HP the fusing register is renamed and changed to have the "enable"
semantics, but otherwise remains compatible (mmio address, bitmask
ranges) with older platforms.
To simplify things we do not add a new register definition but just stop
inverting the fusing masks before processing them.
Bspec: 52615
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-6-matthew.d.roper@intel.com
We kept adding new engines and for that increasing hw_id unnecessarily:
it's not used since GRAPHICS_VER == 8. Prepend "gen6" to the field and
try to pack it in the structs to give a hint this field is actually not
used in recent platforms.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-4-lucas.demarchi@intel.com
The engine hw_id is only used by RING_FAULT_REG(), which is not used
by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set
the engine's guc_id, but that is not the case anymore since
commit c784e5249e77 ("drm/i915/guc: Update to use firmware v49.0.1"):
now we only use class and id information to generate guc_id.
We tend to keep adding new defines just to be consistent, but let's try
to remove them and let them defined to 0 for engines that only exist on
gen8+ platforms.
v2: Reword commit message and add information about when we stopped
using hw_id (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-3-lucas.demarchi@intel.com
gen8_clear_engine_error_register() is actually not used by
GRAPHICS_VER >= 8, since for those we are using another register that is
not engine-dependent. Fix the platform prefix, to make clear we are not
using any GEN6_RING_FAULT_REG_* one GRAPHICS_VER >= 8.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-2-lucas.demarchi@intel.com
Add intel_context tracing. These trace points are particular helpful
when debugging the GuC firmware and can be enabled via
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-19-matthew.brost@intel.com
Add trace point for GuC submit. Extended existing request trace points
to include submit fence value,, guc_id, and ring tail value.
v2: Fix white space alignment in i915_request_add trace point
v3: Delete dep_from , dep_to (Tvrtko)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-18-matthew.brost@intel.com
Update GuC debugfs to support the new GuC structures.
v2:
(John Harrison)
- Remove intel_lrc_reg.h include from i915_debugfs.c
(Michal)
- Rename GuC debugfs functions
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-17-matthew.brost@intel.com
When running the GuC the GPU can't be considered idle if the GuC still
has contexts pinned. As such, a call has been added in
intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for
the number of unpinned contexts to go to zero.
v2: rtimeout -> remaining_timeout
v3: Drop unnecessary includes, guc_submission_busy_loop ->
guc_submission_send_busy_loop, drop negatie timeout trick, move a
refactor of guc_context_unpin to earlier path (John H)
v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle
function if not in GuC submission mode
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-16-matthew.brost@intel.com
Ensure G2H response has space in the buffer before sending H2G CTB as
the GuC can't handle any backpressure on the G2H interface.
v2:
(Matthew)
- s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND
v3:
(Matthew)
- Add G2H credit accounting to blocking path, add g2h_release_space
helper
(John H)
- CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-15-matthew.brost@intel.com
Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.
This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.
v2: Reword commit message
v3:
(John H)
- Add text to commit indicating this also fixing an existing bug
v4:
(John H)
- s/bug/bugs
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com
If two requests are on the same ring, they are explicitly ordered by the
HW. So, a submission fence is sufficient to ensure ordering when using
the new GuC submission interface. Conversely, if two requests share a
timeline and are on the same physical engine but different context this
doesn't ensure ordering on the new GuC submission interface. So, a
completion fence needs to be used to ensure ordering.
v2:
(Daniele)
- Don't delete spin lock
v3:
(Daniele)
- Delete forward dec
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-13-matthew.brost@intel.com
Disable preempt busywait when using GuC scheduling. This isn't needed as
the GuC controls preemption when scheduling.
v2:
(John H):
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-12-matthew.brost@intel.com
Extend the deregistration context fence to fence whne a GuC context has
scheduling disable pending.
v2:
(John H)
- Update comment why we check the pin count within spin lock
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-11-matthew.brost@intel.com
Disable engine barriers for unpinning with GuC. This feature isn't
needed with the GuC as it disables context scheduling before unpinning
which guarantees the HW will not reference the context. Hence it is
not necessary to defer unpinning until a kernel context request
completes on each engine in the context engine mask.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-10-matthew.brost@intel.com
With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.
Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.
v2:
(John H)
- s/drm_dbg/drm_err
(Daneiel)
- Clean up sched state function
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com
