IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add slowwait functions to wait for some operations that may need a long time
to finish. The busywait executes the cmd too fast, which is kind of wasting
cpu in this scenario. At the same time, if shell debugging is enabled with
`set -x`. the busywait will output too much logs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to latest release of SMCv2.1[1], the term 'virtual ISM' has
been changed to 'Emulated-ISM' to avoid the ambiguity of the word
'virtual' in different contexts. So the names or comments in the code
need be modified accordingly.
[1] https://www.ibm.com/support/pages/node/7112343
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20240205033317.127269-1-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: realtek: complete 5Gbps support and replace private constants
Realtek maps standard C45 registers to vendor-specific registers which
can be accessed via C22 w/o MMD. For an unknown reason C22 MMD access
to C45 registers isn't supported for integrated PHY's.
However the vendor-specific registers preserve the format of the C45
registers, so we can use standard constants. First two patches are
cherry-picked from a series posted by Marek some time ago.
RTL8126 supports 5Gbps, therefore add the missing 5Gbps support to
rtl822x_config_aneg().
====================
Link: https://lore.kernel.org/r/31a83fd9-90ce-402a-84c7-d5c20540b730@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8126 as an evolution of RTL8125 supports 5Gbps. rtl822x_config_aneg()
is used by the PHY driver for the integrated PHY, therefore add 5Gbps
support to it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5644ab50-e3e9-477c-96db-05cd5bdc2563@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the ad-hoc MDIO constants used in the driver and use generic
constants instead.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/732a70d6-4191-4aae-8862-3716b062aa9e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to what is done in dpll_device_unregister(), add assertion to
__dpll_pin_unregister() to make sure driver does not try to unregister
non-registered pin.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240206074853.345744-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a879906b63912482dfc41944579df2dc6
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Tested-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/29e9dc0f-5597-4fee-be5c-25a5ab4fe2dc@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
init_dummy_netdev() always returns zero and all the callers do not check
the returned value. Set the function to not return value, as it is not
really used today.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205103022.440946-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: eee network driver cleanups
Since commit d1420bb99515 ("net: phy: improve generic EEE ethtool
functions") changed phylib to set eee->eee_active and eee->eee_enabled,
overriding anything that drivers have set these to prior to calling
phy_ethtool_get_eee().
Therefore, drivers setting these members becomes redundant, since
phylib overwrites the values they set. This series finishes off
Heiner's work in the referenced commit by removing these redundant
writes in various drivers and any associated code or structure members
that become unnecessary.
====================
Link: https://lore.kernel.org/r/Zb9/O81fVAZw4ANr@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
b53_get_mac_eee() sets both eee_enabled and eee_active, and then
returns zero.
dsa_slave_get_eee(), which calls this function, will then continue to
call phylink_ethtool_get_eee(), which will return -EOPNOTSUPP if there
is no PHY present, otherwise calling phy_ethtool_get_eee() which in
turn will call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Thus, when there is no PHY, dsa_slave_get_eee() will fail with
-EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to
userspace. When there is a PHY, eee_enabled and eee_active will be
overwritten by phylib, making the setting of these members in
b53_get_mac_eee() entirely unnecessary.
Remove this code, thus simplifying b53_get_mac_eee().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1rWbNI-002cCz-4x@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcmasp_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in bcmasp_get_eee() is redundant, and
can be removed. This also makes intf->eee.eee_active unnecessary, so
remove this and use a local variable where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbNC-002cCt-W7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcmgenet_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in bcmgenet_get_eee() is redundant,
and can be removed. This also makes priv->eee.eee_active unnecessary,
so remove this and use a local variable where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbN7-002cCn-RO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fec_enet_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in fec_enet_get_eee() is redundant.
Remove this, and remove the setting of fep->eee.eee_active member which
becomes a write-only variable.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1rWbN2-002cCh-MY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sxgbe_get_eee() sets edata->eee_active and edata->eee_enabled from its
own copy, and then calls phy_ethtool_get_eee() which in turn will call
genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in sxgbe_get_eee() is redundant.
Remove this, and remove the priv->eee_active member which then becomes
a write-only variable.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbMx-002cCb-IU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_ethtool_op_get_eee() sets both eee_enabled and eee_active, and
then goes on to call phylink_ethtool_get_eee().
phylink_ethtool_get_eee() will return -EOPNOTSUPP if there is no PHY
present, otherwise calling phy_ethtool_get_eee() which in turn will call
genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Thus, when there is no PHY, stmmac_ethtool_op_get_eee() will fail with
-EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to
userspace. When there is a PHY, eee_enabled and eee_active will be
overwritten by phylib, making the setting of these members in
stmmac_ethtool_op_get_eee() entirely unnecessary.
Remove this code, thus simplifying stmmac_ethtool_op_get_eee().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/E1rWbMs-002cCV-EE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From: Andrew Lunn <andrew@lunn.ch>
To: Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>
Cc: netdev@vger.kernel.org,
Tim Menninger <tmenninger@purestorage.com>,
Andrew Lunn <andrew@lunn.ch>
====================
net: Unify C22 and C45 error handling during bus enumeration
When enumerating an MDIO bus, an MDIO bus driver can return -ENODEV to
a C22 read transaction to indicate there is no device at that address
on the bus. Enumeration will then continue with the next address on
the bus.
Modify C45 enumeration so that it also accepts -ENODEV and moves to
the next address on the bus, rather than consider -ENODEV as a fatal
error.
Convert the mv88e6xxx driver to return -ENODEV rather than 0xffff on
read for families which do not support C45 bus transactions. This is
more efficient, since enumeration will scan multiple devices at one
address when 0xffff is returned, where as -EONDEV immediately jumps to
the next address on the bus.
====================
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
MDIO bus drivers can return -ENODEV when they know the bus does not
have a device at the given address, e.g. because of hardware
limitation. One such limitation is that the bus does not support C45
at all. This is more efficient than returning 0xffff, since it
immediately stops the probing on the given address, where as further
reads can be made when 0xffff is returned.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When scanning the MDIO bus for C22 devices, the driver returning
-ENODEV is not considered fatal, it just indicates the MDIO bus master
knows there is no device at that address, maybe because of hardware
limitation.
Make the C45 scan code act on -ENODEV the same way, to make C22 and
C45 more uniform.
It is expected all reads for a given address will return -ENODEV, so
within get_phy_c45_ids() only the first place a read occurs has been
changed.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the driver core can properly handle constant struct bus_type,
move the nsim_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'bool' is already specified for these options.
The second 'bool' under the help message is redundant.
While I am here, I moved 'default y' above, as it is common to place
the help text last.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both drivers/net/Kconfig and drivers/net/ethernet/Kconfig contain the
same config entry:
config SUNGEM_PHY
tristate
Commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup") moved
SUNGEM_PHY from drivers/net/Kconfig to drivers/net/ethernet/Kconfig.
Shortly after it was applied, commit 19e2f6fe9601 ("net: Fix sungem_phy
sharing.") added the second one to drivers/net/Kconfig.
I kept the one in drivers/net/Kconfig because this CONFIG option controls
the compilation of drivers/net/sungem_phy.c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code from macro NETLBL_CATMAP_MAPTYPE to u64, and fix
warning "Macros with complex values should be enclosed in parentheses"
on "#define NETLBL_CATMAP_BIT (NETLBL_CATMAP_MAPTYPE)0x01", which is
modified to "#define NETLBL_CATMAP_BIT ((u64)0x01)".
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Note: The change to mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val)
in tg3_phy_autoneg_cfg() isn't completely obvious, but it doesn't change
the current functionality.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/0652b910-6bcc-421f-8769-38f7dae5037e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: add and use helper phy_advertise_eee_all
Per default phylib preserves the EEE advertising at the time of
phy probing. The EEE advertising can be changed from user space,
in addition this helper allows to set the EEE advertising to all
supported modes from drivers in kernel space.
====================
Link: https://lore.kernel.org/r/0d886510-b2b7-43f2-b8a6-fb770d97266d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per default phylib preserves the EEE advertising at the time of
phy probing. The EEE advertising can be changed from user space,
in addition this helper allows to set the EEE advertising to all
supported modes from drivers in kernel space.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20bfc471-aeeb-4ae4-ba09-7d6d4be6b86a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-attr elements could not be encoded because of missing logic in the
ynl code. Enable encoding of these attributes by checking if the
attribute is a multi-attr and if the value to be processed is a list.
This has been tested both with the taprio and ets qdisc which contain
this kind of attributes.
Signed-off-by: Alessandro Marcolini <alessandromarcolini99@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/c5bc9f5797168dbf7a4379c42f38d5de8ac7f38a.1706962013.git.alessandromarcolini99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address spelling errors flagged by codespell.
This patch follows-up on an earlier patch by Colin Ian King,
which addressed a spelling error in a user-visible log message [1].
This patch includes that change.
[1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/
This patch is intended to cover all files under
drivers/net/ethernet/mellanox/mlx4
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240205-mlx5-codespell-v1-1-63b86dffbb61@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe says:
====================
nfc: hci: Save a few bytes of memory when registering a 'nfc_llc' engine
nfc_llc_register() calls pass a string literal as the 'name' parameter.
So kstrdup_const() can be used instead of kfree() to avoid a memory
allocation in such cases.
====================
Link: https://lore.kernel.org/r/cover.1706946099.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nfc_llc_register() calls pass a string literal as the 'name' parameter.
So kstrdup_const() can be used instead of kfree() to avoid a memory
allocation in such cases.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new helper to avoid code duplication between nfc_llc_exit() and
nfc_llc_unregister().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is not appropriate for TIPC to use "diag" as its diag module name
while the other protocols are using "$(protoname)_diag" like tcp_diag,
udp_diag and sctp_diag etc.
So this patch is to rename diag.ko to tipc_diag.ko in tipc's Makefile.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/d909edeef072da1810bd5869fdbbfe84411efdb2.1706904669.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The setup and teardown flows are somewhat hard to follow regarding
pdsc_core_init()/pdsc_dev_init() and their corresponding teardown
flows being in pdsc_teardown(). Improve the readability by adding
new pdsc_core_uninit()/pdsc_dev_unint() functions that mirror their
init counterparts. Also, move the notify and admin qcq allocations
into pdsc_core_init(), so they can be freed in pdsc_core_uninit().
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Running xmastree.py against the driver found some
RCT issues, so fix them.
Also, if allocating pdsc->intr_info in pdsc_dev_init()
fails the driver still tries to free pdsc->intr_info.
Fix this by just returning -ENOMEM since there's
nothing to free at this point of failure.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Unmasking the interrupt during the pdsc_adminq_isr
is a bit early and could cause unnecessary interrupts.
Instead always unmask after processing the adminq
and notifyq in pdsc_work_thread()->pdsc_process_adminq().
Also, since we are always unmasking, there's no need
for the local credits variable in pdsc_process_adminq().
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The notifyq rides on the adminq's interrupt, so there's
no need to setup and/or access the notifyq's interrupt
index or bound_intr. The driver sets the bound_intr
using qcq->intx = -1 for the notifyq, but luckily
nothing accesses that field for notifyq. Instead of
expecting that remains the case, just clean up
the notifyq's interrupt index and bound_intr fields.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-02 (ice)
This series contains updates to ice driver only.
Maciej changes some queue configuration calls to existing ones which are
better suited for the purpose.
Aniruddha adds separate reporting for Rx EIPE errors as hardware may
incorrectly report errors on certain packets.
Paul removes an incorrect comment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove incorrect comment
ice: Add a new counter for Rx EIPE errors
ice: make ice_vsi_cfg_txq() static
ice: make ice_vsi_cfg_rxq() static
====================
Link: https://lore.kernel.org/r/20240202175613.3470818-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Device driver structures are shared between all devices that they
match, and thus nothing should never write to the device driver
structure through the phydev->drv pointer. Let's make this pointer
const to catch code that attempts to do so.
Suggested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 52df157f17e56 ("xfrm: take refcnt of dst when creating
struct xfrm_dst bundle") dst_destroy() returns only NULL and no caller
cares about the return value.
There are no in in-tree users of dst_destroy() outside of the file.
Make dst_destroy() static and return void.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240202163746.2489150-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Claudiu Beznea says:
====================
net: ravb: Prepare for suspend to RAM and runtime PM support (part 1)
This series prepares ravb driver for runtime PM support and adjust the
already existing suspend to RAM code to work for RZ/G3S (R9A08G045) SoC.
As there are IP versions that switch to module standby when disabling
the clocks, and because of module standby IP switches to reset and
the register content is lost, to be able to have runtime PM supported
for all IP variants, the configuration operations were moved all to
ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove()
to deal with resource parsing and allocation/free.
The ethtool and IOCTL APIs that could have been run asyncronously
were adapted to return if the interface is down. As explained in
each individual commits description, this should be harmless.
Along with it, the series contains preparatory cleanups.
The series has been tested on the boards with the following device trees:
- r8a7742-iwg21d-q7.dts
- r8a774a1-hihope-rzg2m-ex.dts
- r9a07g043u11-smarc-rzg2ul.dts
- r9a07g054l2-smarc-rzv2l.dts
- r9a07g044l2-smarc-rzg2l.dts
Changes in v6:
- fixed typo in patch 08/15
- re-arranged the tags as my b4 am/shazam placed the Rb tags
before author's Sob tag
Changes in v5:
- collected tags
- fixed typos in patches description
- improved description for patch 07/15
- collected tags
Changes in v4:
- changed cover letter title and keep on 15 patches in series to cope
with requirement at [1]
- add dependency on RESET_CONTROLLER in patch "net: ravb: Make reset
controller support mandatory"
- use pm_runtime_active() in patch "net: ravb: Move the IRQs get and
request in the probe function"
- set config more before reading the mac address in patch "net: ravb: Set
config mode in ndo_open and reset mode in ndo_close"
- collected tags
[1] https://www.kernel.org/doc/html/v6.6/process/maintainer-netdev.html#tl-dr
Changes in v3:
- collected tags
- addressed review comments
- squashed patch 17/21 ("net: ravb: Keep clock request operations grouped
together") from v2 in patch 07/19 ("net: ravb: Move reference clock
enable/disable on runtime PM APIs") from v3
- check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of
checking netif_running()
- dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the
interface is down") as the changes there are not necessary as
ndev->flags & IFF_UP is already checked at the beginning of
__dev_set_rx_mode()
- remove code from ravb_open() introduced by patch 20/21
("net: ravb: Do not apply RX CSUM settings to hardware if the interface
is down") from v2 as this is not necessary; driver already takes
care of this in ravb_emac_init_rcar()
Changes in v2:
- rework the driver (mainly, ravb_open() contains now only resource
allocation and parsing leaving the settings to ravb_open(); ravb_remove()
has been adapted accordingly) to be able to use runtime PM for all
IP variants; due to this number of patches increased
- adjust previous series to review comments
- collected tags
- populated driver's own runtime PM ops with enable/disable of reference
clock
====================
Link: https://lore.kernel.org/r/20240202084136.3426492-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove explicit calls to functions that are called by ravb_open(). There is
no need to have them doubled now that the ravb_open() already contains
what is needed for the interface configuration. Along with it,
configurations needed by PTP were moved to ravb_wol_restore(). With this,
code in ravb_resume() becomes simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As ravb_close() contains now the call to ravb_ptp_stop() for both ccc_gac
and gPTP aware platforms, there is no need to keep the separate call in
ravb_suspend(). Instead, move it to ravb_wol_setup(). In this way the
resulting code is cleaner.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As some IP variants switch to reset mode (and thus the register contents is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM and save more power, set the IP's operating mode to
reset at the end of the probe. Along with it, in the ndo_open API the IP
will be switched to configuration, then operation mode. In the ndo_close
API, the IP will be switched back to reset mode. This allows implementing
runtime PM and, along with it, save more power when the IP is not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initialization sequence for PTP is the same for platforms with ccc_gac
and gptp (according to "Figure 50.71 Flow of gPTP Initialization (Normal,
Common to All Modes)" of the R-Car Series, 3rd generation hardware
manual and "Figure 37A.53 Flow of gPTP Initialization (Normal, Common to
All Modes)" of the RZ/G Series hardware manual).
As some IP variants switch to reset mode (and thus the registers content is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM, move the PTP initialization to the driver's
ndo_open API.
This commit prepares the code for the addition of runtime PM.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
