IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
Even more details at:
https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html
Driver Changes:
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix#6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
Replace vkms_formats macro for fixed-point operations with functions
from drm/drm_fixed.h to do the same job and fix 32-bit compilation
errors.
v2:
- don't cast results to s32 (Igor)
- add missing drm_fixp2int conversion (Igor)
Fixes: a19c2ac9858 ("drm: vkms: Add support to the RGB565 format")
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910190303.682897-1-mwen@igalia.com
drm-misc-next for v6.1-rc1:
[airlied - fix sun4i_tv build]
UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-
Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.
Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.
Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.
Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
This panel has the same delay timing as N116BCA-EA1 from the same
company, which is also the same as delay_200_500_e80_d50.
Add an entry for it.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-2-wenst@chromium.org
Fix regression introduced by commit:
"drm/i915: Individualize fences before adding to dma_resv obj"
which sets obj->read_domains to 0 for both read and write paths.
Also set obj->write_domain to 0 on read path which was removed by
the commit.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639
Fixes: 420a07b841d0 ("drm/i915: Individualize fences before adding to dma_resv obj")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907172641.12555-1-nirmoy.das@intel.com
So far, different views (normal, partial, rotated and remapped)
into the same object are only supported for GGTT mappings.
But with the upcoming VM_BIND feature, PPGTT will also use the
partial view mapping. Hence rename ggtt_view to more generic
gtt_view.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com
The simple display pipeline is a set of helpers that can be used by DRM
drivers to avoid dealing with all the needed components and just define
a few functions to operate a simple display device with one full-screen
scanout buffer feeding a single output.
But it is arguable that this provides the correct level of abstraction
for simple drivers, and recently some have been ported from using these
simple display helpers to use the regular atomic helpers instead.
The rationale for this is that the simple display pipeline helpers don't
hide that much of the DRM complexity, while adding an indirection layer
that conflates the concepts of CRTCs and planes. This makes the helpers
less flexible and harder to be reused among different graphics drivers.
Also, for simple drivers, using the full atomic helpers doesn't require
a lot of additional code. So adding a simple display pipeline layer may
not be worth it.
For these reasons, let's follow that trend and make ssd130x a plain DRM
driver that creates its own primary plane, CRTC, enconder and connector.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905222759.2597186-1-javierm@redhat.com
The TCC_DISABLE registers were not included in the 10.3 headers and
instead just placed directly in the gfx_v10_0.c source. This patch
adds them to the headers so tools like umr can scan them and support them.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Addresses should be printed in hex format.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up by properly
calling dput().
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: hersen wu <hersenxs.wu@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thelford Williams <tdwilliamsiv@gmail.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Yongzhi Liu <lyz_cs@pku.edu.cn>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V1:
The psp_cmd_submit_buf function is called by psp_hw_fini to send
TA unload messages to psp to terminate ras, asd and tmr. But when
amdgpu is uninstalled, drm_dev_unplug is called earlier than
psp_hw_fini in amdgpu_pci_remove, the calling order as follows:
static void amdgpu_pci_remove(struct pci_dev *pdev) {
drm_dev_unplug
......
amdgpu_driver_unload_kms->amdgpu_device_fini_hw->...
->.hw_fini->psp_hw_fini->...
->psp_ta_unload->psp_cmd_submit_buf
......
}
The program will return when calling drm_dev_enter in psp_cmd_submit_buf.
So the call to drm_dev_enter in psp_cmd_submit_buf should be
removed, so that the TA unload messages can be sent to the psp
when amdgpu is uninstalled.
V2:
1. Restore psp_cmd_submit_buf to its original code.
2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in
amdgpu_pci_remove.
3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms,
remove the unplug check to release device mmio resource in
amdgpu_device_fini_hw before calling drm_dev_unplug.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the move to un-versioned filenames, it becomes more difficult to
know exactly what version of a given firmware is being used. So add
the patch level version number to the debugfs output.
Also, support matching by patch level when selecting code paths for
firmware compatibility. While a patch level change cannot be backwards
breaking, it is potentially possible that a new feature only works
from a given patch level onwards (even though it was theoretically
added in an earlier version that bumped the major or minor version).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-2-daniele.ceraolospurio@intel.com
There was a misunderstanding in how firmware file compatibility should
be managed within i915. This has been clarified as:
i915 must support all existing firmware releases forever
new minor firmware releases should replace prior versions
only backwards compatibility breaking releases should be a new file
This patch cleans up the single fallback file support that was added
as a quick fix emergency effort. That is now removed in preference to
supporting arbitrary numbers of firmware files per platform.
The patch also adds support for having GuC firmware files that are
named by major version only (because the major version indicates
backwards breaking changes that affect the KMD) and for having HuC
firmware files with no version number at all (because the KMD has no
interface requirements with the HuC).
For GuC, the driver will report via dmesg if the found file is older than
expected. For HuC, the KMD will no longer require updating for any new
HuC release so will not be able to report what the latest expected
version is.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-1-daniele.ceraolospurio@intel.com
Details:
Currently, when trying to suspend and resume with qxl device，
there are some error messages after resuming,
eventually caused to black screen and can't be recovered.
The first error message:
[ 64.668577][ C3] [drm] driver is in bug mode
This error is due to guest qxl driver
will call qxl_reinit_memslots(qdev) during system resume,
but didn't call qxl_io_reset(qdev) before this,
Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU,
qxl->guest_bug flag will be set，As a result,
the QXL device can't communicate with guest qxl driver through the IO port.
after fix the first error,can success to resume and login to desktop,
but shortly after that will observe the second error message :
[ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001)
[ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12)
[ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12
[ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
[ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO
The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring)
in qxl_drm_resume() function.
When do QXL_IO_RESET,QEMU will call init_qxl_ram(),
so params like prod,cons,notify_on_cons and notify_on_prod
will be set to default value.
Ring push/pop actions for release_ring can be performed normally.
But call qxl_ring_init_hdr(qdev->release_ring)
will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE,
affect the value of notify in qxl_push_free_res() function always be false,
QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the
guest qxl driver，so qxl_ring_pop() will never been called anymore，
and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx)
always return EBUSY,fail to call qxl_bo_create().
Test scenario:
1) start virtual machine with qemu command "-device qxl-vga"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in kernel logs,screen will be black
Let's fix this by reset io and remove the qxl_ring_init_hdr calling.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Suggested-by: Ming Xie<xieming@kylinos.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.
Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too). Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.
Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
Without this, the drm core advertises LINEAR modifier which is
incorrect.
Also userspace virgl does not support modifiers. For example, it causes
chrome on ozone/drm to fail with "Failed to create scanout buffer".
Fixes: 2af104290da5 ("drm: introduce fb_modifiers_not_supported flag in mode_config")
Suggested-by: Shao-Chuan Lee <shaochuan@chromium.org>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The other error labels in sun4i_tv_bind() are named after the task they
perform (err_disable_clk to call clk_disable_unprepare for example).
However, the err_cleanup_connector is named after the calling site
(drm_connector_init failing) and will actually cleanup the encoder. Let's
rename it to err_cleanup_encoder to be consistent.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-39-459522d653a7@cerno.tech
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
Change the mode_set function pointer logic to declarative config0,
config1 and custom_freq fields, to make TV mode setting logic more
concise and uniform.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
[Maxime: Fixed != 0 check, added tv_mode variable]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-26-459522d653a7@cerno.tech
The variable ret is assigned in the judgment branch statement, he does
not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907032934.4490-1-zeming@nfschina.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Pointer dev_priv->mmio, which was checked for NULL at via_do_init_map(),
is passed to via_do_cleanup_map() and is dereferenced there without check.
The patch adds the condition in via_dma_cleanup() which prevents potential NULL
pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 22f579c621e2 ("drm: Add via unichrome support")
Signed-off-by: Alisa Khabibrakhmanova <khabibrakhmanova@ispras.ru>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729090643.240778-1-khabibrakhmanova@ispras.ru
Specially in GT reset case this could be triggered and try
to disable things that had never been enabled. Let's add
some protection here.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902095126.373036-1-rodrigo.vivi@intel.com
Fix kernel-doc warnings in gpu_scheduler.h and sched_main.c.
Quashes these warnings:
include/drm/gpu_scheduler.h:332: warning: missing initial short description on line:
* struct drm_sched_backend_ops
include/drm/gpu_scheduler.h:412: warning: missing initial short description on line:
* struct drm_gpu_scheduler
include/drm/gpu_scheduler.h:461: warning: Function parameter or member 'dev' not described in 'drm_gpu_scheduler'
drivers/gpu/drm/scheduler/sched_main.c:201: warning: missing initial short description on line:
* drm_sched_dependency_optimized
drivers/gpu/drm/scheduler/sched_main.c:995: warning: Function parameter or member 'dev' not described in 'drm_sched_init'
Fixes: 2d33948e4e00 ("drm/scheduler: add documentation")
Fixes: 8ab62eda177b ("drm/sched: Add device pointer to drm_gpu_scheduler")
Fixes: 542cff7893a3 ("drm/sched: Avoid lockdep spalt on killing a processes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jiawei Gu <Jiawei.Gu@amd.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220404213040.12912-1-rdunlap@infradead.org
Some panels trigger HPD irq due to noise, the HPD debounce
may be 1.8ms, exceeding the default irq detect window, ~1.4ms.
This patch set HPD irq detection window to 2ms to
tolerate the HPD noise.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220903130833.541463-1-xji@analogixsemi.com
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
-----BEGIN PGP SIGNATURE-----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=kU/l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then
fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on
DG1, even though it doesn't have small-BAR or flat-CCS.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605
Fixes: efeb3caf4341 ("drm/i915/ttm: disallow CPU fallback mode for ccs pages")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com
This commit also adds new helper macros to deal with fixed-point
arithmetic.
It was done to improve the precision of the conversion to ARGB16161616
since the "conversion ratio" is not an integer.
V3: Adapt the handlers to the new format introduced in patch 7 V3.
V5: Minor improvements
V6: Minor improvements (Pekka Paalanen)
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-10-igormtorrente@gmail.com
This will be useful to write tests that depends on these formats.
ARGB and XRGB follows the a similar implementation of the former formats.
Just adjusting for 16 bits per channel.
V3: Adapt the handlers to the new format introduced in patch 7 V3.
V5: Minor improvements
Added le16_to_cpu/cpu_to_le16 to the 16 bits color read/writes.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-9-igormtorrente@gmail.com
We will remove the current assumption that the primary plane has the
same size and position as CRTC and that the primary plane is the
bottom-most in zpos order, or is even enabled. At least as far
as the blending machinery is concerned.
For that we will add CRTC dimension information to `vkms_crtc_state`
and add a opaque black backgound color.
Because now we need to fill the background, we had a loss in
performance with this change. Results running the IGT[1] test
`igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times:
| Frametime |
|:--------------------------------------------:|
| Implementation | Previous | This commit |
|:---------------:|:---------:|:--------------:|
| frametime range | 5~18 ms | 10~22 ms |
| Average | 8.47 ms | 12.32 ms |
[1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4
V6: Improve the commit description (Pekka Paalanen).
Update some comments (Pekka Paalanen).
Remove some fields from `vkms_crtc_state` and move where
some variables are set (Pekka Paalanen).
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-8-igormtorrente@gmail.com
Currently the blend function only accepts XRGB_8888 and ARGB_8888
as a color input.
This patch refactors all the functions related to the plane composition
to overcome this limitation.
The pixels blend is done using the new internal format. And new handlers
are being added to convert a specific format to/from this internal format.
So the blend operation depends on these handlers to convert to this common
format. The blended result, if necessary, is converted to the writeback
buffer format.
This patch introduces three major differences to the blend function.
1 - All the planes are blended at once.
2 - The blend calculus is done as per line instead of per pixel.
3 - It is responsible to calculates the CRC and writing the writeback
buffer(if necessary).
These changes allow us to allocate way less memory in the intermediate
buffer to compute these operations. Because now we don't need to
have the entire intermediate image lines at once, just one line is
enough.
| Memory consumption (output dimensions) |
|:--------------------------------------:|
| Current | This patch |
|:------------------:|:-----------------:|
| Width * Heigth | 2 * Width |
Beyond memory, we also have a minor performance benefit from all
these changes. Results running the IGT[1] test
`igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times:
| Frametime |
|:------------------------------------------:|
| Implementation | Current | This commit |
|:---------------:|:---------:|:------------:|
| frametime range | 9~22 ms | 5~17 ms |
| Average | 11.4 ms | 7.8 ms |
[1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4
V2: Improves the performance drastically, by performing the operations
per-line and not per-pixel(Pekka Paalanen).
Minor improvements(Pekka Paalanen).
V3: Changes the code to blend the planes all at once. This improves
performance, memory consumption, and removes much of the weirdness
of the V2(Pekka Paalanen and me).
Minor improvements(Pekka Paalanen and me).
V4: Rebase the code and adapt it to the new NUM_OVERLAY_PLANES constant.
V5: Minor checkpatch fixes and the removal of TO-DO item(Melissa Wen).
Several security/robustness improvents(Pekka Paalanen).
Removes check_planes_x_bounds function and allows partial
partly off-screen(Pekka Paalanen).
V6: Fix a mismatch of some variable sizes (Pekka Paalanen).
Several minor improvements (Pekka Paalanen).
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-7-igormtorrente@gmail.com
This commit is the groundwork to introduce new formats to the planes and
writeback buffer. As part of it, a new buffer metadata field is added to
`vkms_writeback_job`, this metadata is represented by the `vkms_frame_info`
struct.
Also adds two new function pointers (`line_to_frame_func` and
`frame_to_line_func`) are defined to handle format conversion
from/to internal format.
A new internal format(`struct pixel_argb_u16`) is introduced to deal with
all possible inputs. It consists of 16 bits fields that represent each of
the channels.
These things will allow us, in the future, to have different compositing
and wb format types.
V2: Change the code to get the drm_framebuffer reference and not copy its
contents (Thomas Zimmermann).
V3: Drop the refcount in the wb code (Thomas Zimmermann).
V5: Add {wb,plane}_format_transform_func to vkms_writeback_job
and vkms_plane_state (Pekka Paalanen)
V6: Improvements to some struct/struct members names (Pekka Paalanen).
Splits this patch in two (Pekka Paalanen).
V7: Replace line_to_frame_func and frame_to_line_func typedefs
with the function signature and void* (Melissa Wen).
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-6-igormtorrente@gmail.com
