IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds a bunch of new pixel clock- and tmds rates to the pre-pll
table which are required to get more VESA and some DMT rates working.
It has been completely re-calculated to match the min- and max-vco of
(750 MHz - 3.2 GHz) requirements. If more than one configuration would
have been possible the lowest fbdiv and refdiv (and therefore lowest
vco rate) has been preferred.
It's important to note, that RK3228 version of the phy does not support
fractional dividers. To support the most possible rates for this version
also in both 8-bit and 10-bit variant, some rates are not exact. The
maximum deviation of the pixel clock is 0.26, which perfectly fits into
VESA DMT recommendation of 0.5%.
I tested all possible rates on several screens from different
manufacturers with both RK3228 and RK3328. Both pre- and post-PLL
locking are slighlty faster now.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-7-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Regular 8-bit and Deep Color video formats mainly differ in TMDS rate and
not in pixel clock rate.
When the hdmiphy clock is configured with the same pixel clock rate using
clk_set_rate() the clock framework do not signal the hdmi phy driver
to set_rate when switching between 8-bit and Deep Color.
This result in pre/post pll not being re-configured when switching between
regular 8-bit and Deep Color video formats.
Fix this by calling set_rate in power_on to force pre pll re-configuration.
Signed-off-by: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-6-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.
Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.
Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.
Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.
Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.
Fix this by using correct vco_div_5 macro for RK3328.
Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only difference between qmp_v6_dp_aux_init() and
qmp_v4_dp_aux_init() is the address of COM_BIAS_EN_CLKBUFLR_EN register.
Move it to register layout and drop the duplicate function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-7-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The functions qmp_v5_configure_dp_phy() and qmp_v6_configure_dp_phy()
are now copies of qmp_v4_configure_dp_phy(). Drop them and use the v4
function in all the cases.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use register layout for TX_HIGHZ_DRVR_EN and TX_TRANSCEIVER_BIAS_EN
registers. This will allow us to unify qmp_v[456]_configure_dp_phy()
functions in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It seems the commit a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp
USB/DP combo phys") contained a typo for selecting bias0_en values.
First, bias0_en and bias1_en are expected to be symmetrical, and then
the vendor driver also uses `flipped : 0x3E : 0x15` statement for
bias0_en. Correct bias0_en programming to follow this.
Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Fixes: a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enabling clock for all the lanes consumes power even PHY is active or
inactive. To resolve this, enable/disable clocks in phy_init/phy_exit.
By default clock is disabled for all the lanes. Whenever phy_init called
from USB, SATA, or display driver, etc. It enabled the required clock
for requested lane. On phy_exit cycle, it disabled clock for the active
PHYs.
During the suspend/resume cycle, each USB/ SATA/ display driver called
phy_exit/phy_init individually. It disabled clock on exit, and enabled
on initialization for the active PHYs.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230613140250.3018947-3-piyush.mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added Runtime power management support to the xilinx phy driver and using
DEFINE_RUNTIME_DEV_PM_OPS new macros allows the compiler to remove the
unused dev_pm_ops structure and related functions if !CONFIG_PM without
the need to mark the functions __maybe_unused.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230613140250.3018947-2-piyush.mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All of the entries do fit in a maximum of 82 columns, which is
acceptable. While at it, also remove the useless comma on the
last entry and add the usual sentinel comment.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230525115258.90091-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Switch to devm_of_clk_add_hw_provider() in the probe function: this
also allows to entirely remove the .remove_new() callback, as its
only task was to unregister the clock provider.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230525115258.90091-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of registering a struct clk, directly register clk_hw: this
allows us to cleanup a pointer to struct clk from struct mtk_mipi_tx.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230525115258.90091-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When adding support for some of the platforms (sc7180, sc8180x, sdm845,
sm8[1234]50), we added USB PHYs for the combo USB+DP QMP PHYs. Now all
such usecases were migrated to use USB+DP Combo driver. To simplify the
qcom-qmp-usb PHY driver split the legacy USB+dp_com support into a
separate driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230531023415.1209301-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The qcom,msm8996-qmp-usb3-phy.yaml defines bindings for several PHYs
which predate USB -> USB+DP migration. Now as sm8150 has been migrated,
drop the legacy bindings completely. No device trees use them anymore.
Newer USB+DP bindings should use combo bindings from the beginning.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230531023415.1209301-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add bindings for sm8150 USB+DP PHY. These bindings follow the older
style as this is a quick conversion to simplify further driver cleanup.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230531023415.1209301-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Printing the OF node is not useful, since we get the same information
from the device context. Instead print the reg address, that could
not be found.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-8-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify the code by directly getting the match data via
device_get_match_data() instead of open coding its functionality.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-7-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify phyclk handling by using devm_clk_get_optional_enabled to
acquire and enable the optional clock. This also fixes a resource
leak in driver remove path and adds proper error handling.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-6-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On RK3588 some registers need to be tweaked to support waking up from
suspend when a USB device is plugged into a port from a suspended PHY.
Without this change USB devices only work when they are plugged at
boot time.
Apart from that it optimizes settings to avoid devices toggling
between fullspeed and highspeed mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-5-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add basic support for the USB2 PHY found in the Rockchip RK3588.
Co-developed-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522170324.61349-3-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of a 3D matrix use a key:value pair table for link_cmn_vals,
xcvr_diag_vals, pcs_cmn_vals, phy_pma_cmn_vals, cmn_vals,
tx_ln_vals and rx_ln_vals. This makes it scaleable for multiple
reference clocks.
Wherever both CDNS and TI use the same settings, reuse the same data.
Introduce CLK_ANY and ANY_SSC enums which are used if the setting
is independent of clock rate or SSC type.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/20230530143853.26571-3-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705090126.26854-2-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705090126.26854-1-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- swiotlb area sizing fixes (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=4Lfc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
boot reordering work
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSqal4ACgkQEsHwGGHe
VUr+pg/+JyqfzyymWYAaPUfwaFH7V8425p8thrZL+OSnDDoAZt5UnPpLB4lYZKWW
u2SlphNSLhuclZ7Wly1zkkPO1J8O88FRCFFBxONtnrQ4WqH2P7f2E6cHgzD4dQRF
RX/pNuLQ1TNYiOHvNvJ3xJvVdAGrcXFBbqupfSig+dQMBKIyuzGu/Jn7Cm0Q+HJK
j9WJWiGNJ+f8WOEbHiTdI89OFcPmUMe2nhtK/I/QIUoCBIiyp3jQ2RilZwY2V7Wu
U5kSQChqp7N+e275TLlOCFGvNW2htCZ5GPc2/nCOkfmnTDTwjVGX8jQr+EqC1pj1
WcueoTjBMw2Drs4/V9ItkGXYqmUE4CK03nGp6uZ2hA5Qo8mSAdzr59A3+I7BbHur
ulbm1i6ZZ0ip9Co080E0JS0F1CIL7ROIQ6HDQz4BUGQ1BbmIhNBmdj7yBJ20nTrr
L7EmwgDsOF2NhKpg5USGrPxJWBvc9ma72CAlHAiPVUgzFIR6Z5DN9TM8aWgZZPDt
RULC1/L/SI2FQmrMnCYhjO7Om0qJFk422cWCVjOA3D/lRo3toFEJ/XopxxXz9FZs
guAIJuFLjDun13hxS9PCGvRCkg2cdVsCykkg1ydAbg2ux99rPDAmmnwYPG7pvxiP
2W0gq43dbQAZlYjRx3gV5sHpUtPCsF+1Lz5jXkldRZJNXD1v1Fk=
=RZFV
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
On shutdown or kexec, the kernel tries to park the non-boot CPUs with an
INIT IPI. But the same code path is also used by the crash utility. If the
CPU which panics is not the boot CPU then it sends an INIT IPI to the boot
CPU which resets the machine. Prevent this by validating that the CPU which
runs the stop mechanism is the boot CPU. If not, leave the other CPUs in
HLT.
-----BEGIN PGP SIGNATURE-----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=DOCF
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
* Fix an uninitialized variable warning.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZKjUjwAKCRBKO3ySh0YR
pn92AQC4gY9GOyKcc/aiAd/t1u8gGxnFtcN06xh4TdVArMM4/AD/UtEKx9LYuaSF
pyhw5SfzxI555HfXkA8ci/D+BxguVQs=
=/vX1
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
-----BEGIN PGP SIGNATURE-----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=F8D0
-----END PGP SIGNATURE-----
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZKmgXAAKCRDdBJ7gKXxA
joqDAP0V520Jy0cyJrRMvaQRFMqtVeDOdTpAue7ZOQHSi/LZnAD9EEAxDpYF/V4x
PO27ixXQ4Glm2iYgH7bDX7J73WiA3wg=
=JsYW
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few late arriving patches that missed the initial pull request.
It's mostly bug fixes (the dt-bindings is a fix for the initial pull).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZKmvwSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishResAQCPDbBh
omMRBE+W+Vx2TgOJGjo/F+T1D2JjBhLIGpNVggEApJtgrQutAToiCU/qIP9GOTl7
evetzh5boMMuyD2s7ak=
=pi4v
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
