IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Here is a third set of fixes for the soc tree, well
within the expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have
new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge
patch that caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65,
Qualcomm sm8450, and Broadcom BCM2711
-----BEGIN PGP SIGNATURE-----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=A4g/
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One more patch to fix up eDP panels on Nyan FHD models.
-----BEGIN PGP SIGNATURE-----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=aVP/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=12mM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Device tree fixes for v5.17
One more patch to fix up eDP panels on Nyan FHD models.
* tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move Nyan FHD panels to AUX bus
ARM: tegra: Move panels to AUX bus
Link: https://lore.kernel.org/r/20220308084339.2199400-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Similarly to what was earlier done for other Nyan variants, move the eDP
panel on the FHD models to the AUX bus as well.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: ef6fb9875ce0 ("ARM: tegra: Add device-tree for 1080p version of Nyan Big")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes for devkit8000 timer regression. Similar to the earlier beagleboard
fixes, we must not configure the clocksource drivers to use an alternative
timer configuration. It causes unnecessary issues with power management.
Only some old designs based on early beagleboard revisions with a miswired
timer need to use the alternative timer.
-----BEGIN PGP SIGNATURE-----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=wzWV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6KSb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
Fixes for devkit8000 timer regression. Similar to the earlier beagleboard
fixes, we must not configure the clocksource drivers to use an alternative
timer configuration. It causes unnecessary issues with power management.
Only some old designs based on early beagleboard revisions with a miswired
timer need to use the alternative timer.
* tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use 32KiHz oscillator on devkit8000
ARM: dts: switch timer config to common devkit8000 devicetree
Link: https://lore.kernel.org/r/pull-1645606483-876944@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains fixes for the eDP panel found on the Venice 2 and Nyan
boards.
-----BEGIN PGP SIGNATURE-----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=Tt8D
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Umbv
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-arm-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Device tree fixes for v5.17-rc6
This contains fixes for the eDP panel found on the Venice 2 and Nyan
boards.
* tag 'tegra-for-5.17-arm-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move panels to AUX bus
Link: https://lore.kernel.org/r/20220223162209.293722-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well
as a number of dtschema fixes to make the reduce the number of errors.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmIUy+0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgR7lB/4yyzzeEiUrQg4ffNVFX8OJ/97ExE2C+7SX
/dHtlHZ5W7XMRx7gL/6hXne2rXWYW8BTk0nA0Hn0vuvbV96kfwbydb2I76aNrAkB
eT/wGaTFhnT5v+Cmx3krrk9vxDL2kRli2A5/SefJUvnUGufS294OAgkLspa9hfMf
QsBd0hGjt4WC/OIZYCukvhmaco9K0wGoUxrcuRRVY0lBuxvUZ4sjpZTiHNfeYhE1
zRA7OsH4KdW3wd3VvC2GnVfJQLpThKw+FuolHF4XIYpqegXxddYbXZAlysk0zyxS
Hz2XnO84xP8AnXCBo++VYU4EhjJOwGQO5rjZXpP2Dk5A21/nKux0
=9LO/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIX/NQACgkQmmx57+YA
GNnR4xAAu9BxCqmCpFIiPm3hL6zutuJc0xMm8L3CPkDFBLSNvFBD8xNZbpbAdaGJ
U3DBtyWZ8nrQ4jQvx54SGPHKOe4vma4CuwYNwSwGX6z4XJxhdP36tjph9xsdwWH4
QFS07001kIDI/FNreurMunWWrgkkeD2cr+D/jGYLLrkTIuBqZG2OFAuARrChRElI
f4ZAWowCAOEYgKQqh/ofKber1w6DcyCw0Y3Ze4Ud3Tuk81PISLiSE4enD4DRjtxg
Lxbin0akbNM38nq6AXzsiZ38LhNjUq1pgSNyVj9ZReGcPbpHAqYMOENTrlGZrJGc
wjbPzpvDHt0kbG88f63PZcDk9HHnRTyX0I/PjG3heYjb+2xaChOZABypEv7CPPMH
hxm7Pgq8H6Y8VQymD7WmKssMyQgl81Evj0GHS+DJ6DXSln4AssWH2eKpavAfcuyF
W1afdoYWzOH2B9aw6MEaUBeUOsZ0DVqYWEnX5kZVfn5fdlcp0gGjWSZzH+VmwgT8
efUGz9ffapfMmKA6Vt7Ls8B31bSmLzBA/qmCpQ1Sk1MNQxa/md2i8U0d3NU1wqr3
8MNJkMLAD38fAiVaQ+1sNXzI69Ud5BlVY/+UAfBcv58VyEILFiNH1V9FgcR1HzkF
j9n8Bdo9X4HY33xfQGgnp8+9g6QwoVxIycpjjbXPBVGTkFoN7tQ=
=0DE7
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A
board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well
as a number of dtschema fixes to make the reduce the number of errors.
* tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
ARM: dts: rockchip: reorder rk322x hmdi clocks
arm64: dts: rockchip: reorder rk3399 hdmi clocks
arm64: dts: rockchip: align pl330 node name with dtschema
arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage
arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568
arm64: dts: rockchip: fix dma-controller node names on rk356x
Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While the HVS has the same context memory size in the BCM2711 than in
the previous SoCs, the range allocated to the registers doubled and it
now takes 16k + 16k, compared to 8k + 16k before.
The KMS driver will use the whole context RAM though, eventually
resulting in a pointer dereference error when we access the higher half
of the context memory since it hasn't been mapped.
Fixes: 4564363351e2 ("ARM: dts: bcm2711: Enable the display pipeline")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Move the eDP panel on Venice 2 and Nyan boards into the corresponding
AUX bus device tree node. This allows us to avoid a nasty circular
dependency that would otherwise be created between the DPAUX and panel
nodes via the DDC/I2C phandle.
Fixes: eb481f9ac95c ("ARM: tegra: add Acer Chromebook 13 device tree")
Fixes: 59fe02cb079f ("ARM: tegra: Add DTS for the nyan-blaze board")
Fixes: 40e231c770a4 ("ARM: tegra: Enable eDP for Venice2")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.
If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.
This commit fixes the same issue observed with commit 23885389dbbb
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.
Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch allow lcd43 and lcd70 flavors to benefit from timer
evolution.
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
crypto-controller had a typo, fix it.
In the same time, rename it to just crypto
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The property 'irq-over-gpio' is both unused and undocumented. It also
happens to collide with standard *-gpio properties. As it is not needed,
drop it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220204004117.1232902-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
MIMX8MN5CVTI SoC which does not integrate a GPU.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmH07LcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4SXggAtL8LooZ32Ycf4E5j12hFXfrOxuoz
oTboUDcw+Udyz56szmeIoADs2rGU5xW/AvuMK+RvfDlv3RvoB4S28FMWtSFs6lLH
SBRzSuYotGKTyrJGFaJZxZSjztYaRQok6xBPDdlOF6JRzIPpifr7Lkv/ZZZcS9pA
gijNDj+y61mylzE/XIXqgpbeKP42R2CZHMQZQNCZ1Is3mGaKgkpJ35OSMFI4ti7D
xJTFJP3TmSldRZf3C0DFC7ZiAdFm3fm6XwqOyCOgPm9wzapwbs3H1bZ/Sb1njScp
8wNRAPhEXHmRF6J5YT2dRIsC/TG5zbSf/Qald2haCn4YtwtL+QaJ3CqMHw==
=1xnU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FTS/
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17:
- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
MIMX8MN5CVTI SoC which does not integrate a GPU.
* tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix lcdif port node
arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor
arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers
ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo
arm64: dts: ls1028a: sl28: re-enable ftm_alarm0
arm64: dts: freescale: Fix sound card model for MBa8Mx
ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
ARM: dts: imx6qdl-udoo: Properly describe the SD card detect
arm64: dts: imx8mn-venice-gw7902: disable gpu
Link: https://lore.kernel.org/r/20220129073150.GZ4686@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
-----BEGIN PGP SIGNATURE-----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=hMu7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iogZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The correct property name is 'assigned-clock-parents', not
'assigned-clocks-parents'. Though if the platform works with the typo, one
has to wonder if the property is even needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, SD card fails to mount due to the following pinctrl error:
[ 11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[ 11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[ 11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0 on device 80018000.pinctrl
[ 11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back
Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.
With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.
Cc: <stable@vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO7_IO00 is used as SD card detect.
Properly describe this in the devicetree.
Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.
There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.
To limit the use of such broken compressed files, this commit renames
the existing macros as follows:
cmd_bzip2 --> cmd_bzip2_with_size
cmd_lzma --> cmd_lzma_with_size
cmd_lzo --> cmd_lzo_with_size
cmd_lz4 --> cmd_lz4_with_size
cmd_xzkern --> cmd_xzkern_with_size
cmd_zstd22 --> cmd_zstd22_with_size
To keep the decompressors working, I updated the following Makefiles
accordingly:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/mips/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/x86/boot/compressed/Makefile
I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.
I did not touch the following:
arch/arc/boot/Makefile
arch/arm64/boot/Makefile
arch/csky/boot/Makefile
arch/mips/boot/Makefile
arch/riscv/boot/Makefile
arch/sh/boot/Makefile
kernel/Makefile
This means those Makefiles will stop appending the size data.
I dropped the 'override size_append' hack from usr/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
I had to rebase at last moment to fix wrong author of one
commit. Sorry about that.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCYd8hdwAKCRAw5/Bqldv6
8m3sAKC20ddEFW04Mk45Tw72qSyud6vhwQCaAnQy6dcd+zV6LOxosgLZdtXkvx0=
=CU+X
-----END PGP SIGNATURE-----
Merge tag 'leds-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Nothing major is happening here"
* tag 'leds-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: lp55xx: initialise output direction from dts
ARM: dts: omap3-n900: Fix lp5523 for multi color
leds: ktd2692: Drop calling dev_of_node() in ktd2692_parse_dt
leds: lgm-sso: Get rid of duplicate of_node assignment
leds: tca6507: Get rid of duplicate of_node assignment
leds: leds-fsg: Drop FSG3 LED driver
leds: lp50xx: remove unused variable
dt-bindings: leds: Replace moonlight with indicator in mt6360 example
leds: led-core: Update fwnode with device_set_node
leds: tca6507: use swap() to make code cleaner
leds: Add mt6360 driver
dt-bindings: leds: Add bindings for MT6360 LED
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
- amba bus irq rework
- add kfence support
- support for Cortex M33 and M55 CPUs
- kbuild updates for decompressor
- let core code manage thread_info::cpu
- avoid unpredictable NOP encoding in decompressor
- reduce information printed in calltraces
-----BEGIN PGP SIGNATURE-----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=Pvr1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- amba bus irq rework
- add kfence support
- support for Cortex M33 and M55 CPUs
- kbuild updates for decompressor
- let core code manage thread_info::cpu
- avoid unpredictable NOP encoding in decompressor
- reduce information printed in calltraces
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: reduce the information printed in call traces
ARM: 9168/1: Add support for Cortex-M55 processor
ARM: 9167/1: Add support for Cortex-M33 processor
ARM: 9166/1: Support KFENCE for ARM
ARM: 9165/1: mm: Provide is_write_fault()
ARM: 9164/1: mm: Provide set_memory_valid()
ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()
ARM: 9162/1: amba: Kill sysfs attribute file of irq
ARM: 9161/1: mm: mark private VM_FAULT_X defines as vm_fault_t
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
ARM: 9158/1: leave it to core code to manage thread_info::cpu
ARM: 9154/1: decompressor: do not copy source files while building
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8b-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8b-uart"
Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.
Also update the order of the clocks to match the order defined in the
yaml bindings.
Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com
The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8-uart"
Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.
Also update the order of the clocks to match the order defined in the
yaml schema.
Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com
The dt-bindings for the UART controller only allow the following values
for Meson6 SoCs:
- "amlogic,meson6-uart", "amlogic,meson-ao-uart"
- "amlogic,meson6-uart"
Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.
Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable")
commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of commit 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling"),
which does a write to the CQSPI_REG_WR_COMPLETION_CTRL register
regardless of any condition. Well, the Cadence QuadSPI controller on
Intel's SoCFPGA platforms does not implement the
CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register
results in a crash!
So starting with v5.16, I introduced the patch
98d948eb833 ("spi: cadence-quadspi: fix write completion support"),
which adds the dts compatible "intel,socfpga-qspi" that is specific for
versions that doesn't have the CQSPI_REG_WR_COMPLETION_CTRL register implemented.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3: revert back to "intel,socfpga-qspi"
v2: use both "cdns,qspi-nor" and "cdns,qspi-nor-0010"
This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on
a board, the other one fixing a driver bug in the "RSB"
bus driver. This was originally targetted for 5.17, but
seemed worth moving to 5.16.
- Two small fixes for devicetree files on i.MX platforms,
resolving problems with ethernet and i2c.
-----BEGIN PGP SIGNATURE-----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=vUXF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
-----BEGIN PGP SIGNATURE-----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=cSDK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=MfG5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
Looks like we are still using legacy clock defines for dra7. We want to
stop using these as it prevents dropping the legacy clocks. Note that
this is just a cosmetic fix.
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
-----BEGIN PGP SIGNATURE-----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=SjjW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rvAi
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If LPC KCS driver is registered ahead of lpc-ctrl module, LPC KCS
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds 'clocks' property setting into LPC
KCS node as one of required properties to enable the LCLK by the
LPC KCS driver.
Note: dtbs should be re-compiled after applying this change since
it's adding a new required property otherwise the driver will not
be probed correctly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211108190200.290957-5-jae.hyun.yoo@intel.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds 'clocks' property setting into LPC
IBT node as one of required properties to enable the LCLK by the
LPC IBT driver.
Note: dtbs should be re-compiled after applying this change since
it's adding a new required property otherwise the driver will not
be probed correctly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211108190200.290957-2-jae.hyun.yoo@intel.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the Nuvoton NPCT75X, a TIS I2C TPM.
Modified Eddie's change to include the general compatible string, and
combine the rainier and everest patches.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211208191758.20517-8-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Ensure both controllers are enabled on, and add GPIO hog for USB power
control to set the USB power to always on.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211208170641.13322-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The TYAN S8036 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211130180110.2217042-1-aaelhaj@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Configure the vuart in such a way that it does not inhibit the SuperIO's
UART from functioning correctly. This allows the same DTS to be used for
both configurations with SuperIO and VUART (depending on the BIOS
build). The decision on whether to actually enable VUART can then be
made at runtime.
This change also enables the new uart_routing driver for the SuperIO
case.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20211130184855.1779353-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add openbmc-flash-layout-64-alt.dtsi to describe the partitions of the
secondary flash for OpenBMC's 64M static layout.
The layout is the same as openbmc-flash-layout-64.dtsi and the labels
are prepended with "alt-" for the partitions.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20211210093443.2140557-1-yulei.sh@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Linus Torvalds
Joel Stanley
Arnd Bergmann
Thierry Reding
Maxime Ripard
Anthoine Bourgeois
Corentin Labbe
Sascha Hauer
Linus Walleij
Rob Herring
Fabio Estevam
Masahiro Yamada
Sicelo A. Mhlongo
Martin Blumenstingl
Phil Elwell
Jakub Kicinski
Dinh Nguyen
Tony Lindgren
Jae Hyun Yoo
Eddie James
Ali El-Haj-Mahmoud
Oskar Senft
Howard Chiu
Lei YU