IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 6258cf25d5e3155c3219ab5a79b970eef7996356 ]
Prior to the commit identified below, call_transmit_status() would
handle -EPERM and other errors related to an unreachable server by
falling through to call_status() which added a 3-second delay and
handled the failure as a timeout.
Since that commit, call_transmit_status() falls through to
handle_bind(). For UDP this moves straight on to handle_connect() and
handle_transmit() so we immediately retransmit - and likely get the same
error.
This results in an indefinite loop in __rpc_execute() which triggers a
soft-lockup warning.
For the errors that indicate an unreachable server,
call_transmit_status() should fall back to call_status() as it did
before. This cannot cause the thundering herd that the previous patch
was avoiding, as the call_status() will insert a delay.
Fixes: ed7dc973bd91 ("SUNRPC: Prevent thundering herd when the socket is not connected")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd9f2dd23c632568156217aac7a05f5a0313152 ]
Avoid FastReg operations getting MW_BIND_ERR after a reconnect.
rpcrdma_reqs_reset() is called on transport tear-down to get each
rpcrdma_req back into a clean state.
MRs on req->rl_registered are waiting for a FastReg, are already
registered, or are waiting for invalidation. If the transport is
being torn down when reqs_reset() is called, the matching LocalInv
might never be posted. That leaves these MR registered /and/ on
req->rl_free_mrs, where they can be re-used for the next
connection.
Since xprtrdma does not keep specific track of the MR state, it's
not possible to know what state these MRs are in, so the only safe
thing to do is release them immediately.
Fixes: 5de55ce951a1 ("xprtrdma: Release in-flight MRs on disconnect")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40176714c818b0b6a2ca8213cdb7654fbd49b742 ]
Commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
The memory allocation used to occur in two steps:
tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
And it turned that into the following allocation:
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1]
Fixes: 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Fixes: commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c879a8c39dd55e7fabdd8d13341f7bc5200db377 ]
Linking a file into two modules can have unintended side-effects
and produces a W=1 warning:
scripts/Makefile.build:236: drivers/mfd/Makefile: rsmu_core.o is added to multiple modules: rsmu-i2c rsmu-spi
Make this one a separate module instead.
Fixes: a1867f85e06e ("mfd: Add Renesas Synchronization Management Unit (SMU) support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529094856.1869543-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40934ae32232140e85dc7dc1c3ea0e296986723 ]
In the past, the exclude_guest setting has had no effect on Intel PT
tracing, but that may not be the case in the future.
Set the flag correctly based upon whether KVM is using Intel PT
"Host/Guest" mode, which is determined by the kvm_intel module
parameter pt_mode:
pt_mode=0 System-wide mode : host and guest output to host buffer
pt_mode=1 Host/Guest mode : host/guest output to host/guest
buffers respectively
Fixes: 6e86bfdc4a60 ("perf intel-pt: Support decoding of guest kernel")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b4cd990a8fd3f5b748883050e9d8c69fe6398d ]
aux_watermark is a u32. For a 64-bit size, cap the aux_watermark
calculation at UINT_MAX instead of truncating it to 32-bits.
Fixes: 874fc35cdd55 ("perf intel-pt: Use aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-2-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750a4b1224142bd8dd057b0d5adf8a5608b7e77 ]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d4c ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907c3fe532253a6ef4eb9c4d67efb71fab58c706 ]
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 940b27161afc6ec53fc66245a4fb3518394cdc92 ]
This reverts commit da1afe8e6099980fe1e2fd7436dca284af9d3f29.
Commit 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()"), introduced in
5.5, added of_led_get() and led_put() but missed a put_device() in
led_put(), thus creating a leak in case the consumer device is removed.
Arguably device removal was not very popular, so this went apparently
unnoticed until 2022. In January 2023 two different patches got merged to
fix the same bug:
- commit da1afe8e6099 ("leds: led-core: Fix refcount leak in of_led_get()")
- commit 445110941eb9 ("leds: led-class: Add missing put_device() to led_put()")
They fix the bug in two different ways, which creates no patch conflicts,
and both were merged in v6.2. The result is that now there is one more
put_device() than get_device()s, instead of one less.
Arguably device removal is not very popular yet, so this apparently hasn't
been noticed as well up to now. But it blew up here while I'm working with
device tree overlay insertion and removal. The symptom is an apparently
unrelated list of oopses on device removal, with reasons:
kernfs: can not remove 'uevent', no directory
kernfs: can not remove 'brightness', no directory
kernfs: can not remove 'max_brightness', no directory
...
Here sysfs fails removing attribute files, which is because the device name
changed and so the sysfs path. This is because the device name string got
corrupted, which is because it got freed too early and its memory reused.
Different symptoms could appear in different use cases.
Fix by removing one of the two fixes.
The choice was to remove commit da1afe8e6099 because:
* it is calling put_device() inside of_led_get() just after getting the
device, thus it is basically not refcounting the LED device at all
during its entire lifetime
* it does not add a corresponding put_device() in led_get(), so it fixes
only the OF case
The other fix (445110941eb9) is adding the put_device() in led_put() so it
covers the entire lifetime, and it works even in the non-DT case.
Fixes: da1afe8e6099 ("leds: led-core: Fix refcount leak in of_led_get()")
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240625-led-class-device-leak-v2-1-75fdccf47421@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bd09a2db0f617377027a2bb0b9179e6959edff3 ]
Add check for the return value of drm_cvt_mode() and return the error if
it fails in order to avoid NULL pointer dereference.
Fixes: 1b043677d4be ("drm/qxl: add qxl_add_mode helper function")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58979ad6330a70450ed78837be3095107d022ea9 ]
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ]
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2119 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff16aeb9b83441b8458d4235496cf320189a0c60 ]
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d82752 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33fe7c08446af6dda0ff08ff4fa9c921e574477f ]
$TEST_PROGRAM is a command with spaces so it's supposed to be word
split. The referenced fix to fix the shellcheck warnings incorrectly
quoted this string so unquote it to fix the test.
At the same time silence the shellcheck warning for that line and fix
two more shellcheck errors at the end of the script.
Fixes: 1bb17b4c6c91 ("perf tests arm_callgraph_fp: Address shellcheck warnings about signal names and adding double quotes for expression")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: spoorts2@in.ibm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230622101809.2431897-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: ff16aeb9b834 ("perf test: Make test_arm_callgraph_fp.sh more robust")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bb17b4c6c91ad4d9468247cf5f5464fa6440668 ]
Running shellcheck -S on test_arm_calligraph_fp throws warnings SC2086 and SC3049,
$shellcheck -S warning tests/shell/test_arm_callgraph_fp.sh
rm -f $PERF_DATA
: Double quote to prevent globbing and word splitting.
trap cleanup_files exit term int
: In POSIX sh, using lower/mixed case for signal names is undefined.
After fixing the warnings,
$shellcheck tests/shell/test_arm_callgraph_fp.sh
$ echo $?
0
To address the POSIX shell warnings added changes to convert Lowercase
signal names to uppercase in the script and double quoted the
command substitutions($fix to "$fix") to solve Globbing warnings.
Signed-off-by: Spoorthy S<spoorts2@in.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: ff16aeb9b834 ("perf test: Make test_arm_callgraph_fp.sh more robust")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf0b4a73a4a4f36bb4ef53d066b811b7621c635 ]
So that it can get rid of requirement of a compiler.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: ff16aeb9b834 ("perf test: Make test_arm_callgraph_fp.sh more robust")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d68e3dedd4b48f0358bdc187277e3315d8aa559 ]
clear_pending_flush() ctl op is always assigned irrespective of the DPU
hardware revision. Hence there is no needed to check whether the op has
been assigned before calling it.
Drop the checks across the driver for clear_pending_flush() and also
update its documentation that it is always expected to be assigned.
changes in v2:
- instead of adding more validity checks just drop the one for clear_pending_flush
- update the documentation for clear_pending_flush() ctl op
- update the commit text reflecting these changes
changes in v3:
- simplify the documentation of clear_pending_flush
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/464fbd84-0d1c-43c3-a40b-31656ac06456@moroto.mountain/T/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600241/
Link: https://lore.kernel.org/r/20240620201731.3694593-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ecd0ddd223b68b4603e4766a1d51f6c6cda346e ]
Video mode DSC won't work if this field is not set correctly. Set it to fix
video mode DSC (for slice_per_pkt==1 cases at least).
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596234/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0dc9adf9474ecb7106e60e5472577375aedaed3 ]
Triggers which have trigger specific sysfs attributes typically store
related data in trigger-data allocated by the activate() callback and
freed by the deactivate() callback.
Calling device_remove_groups() after calling deactivate() leaves a window
where the sysfs attributes show/store functions could be called after
deactivation and then operate on the just freed trigger-data.
Move the device_remove_groups() call to before deactivate() to close
this race window.
This also makes the deactivation path properly do things in reverse order
of the activation path which calls the activate() callback before calling
device_add_groups().
Fixes: a7e7a3156300 ("leds: triggers: add device attribute support")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240504162533.76780-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb7a0985fd16868b5d72eb3e3de7524a6000e6e ]
Add OVL compatible name for MT8195.
Without this commit, DRM won't work after modifying the device tree.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-7-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86b89dc669c400576dc23aa923bcf302f99e8e3a ]
Fix an issue that plane coordinate was not saved when
calling async update.
Fixes: 920fffcc8912 ("drm/mediatek: update cursors by using async atomic update")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-1-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a213bc09b1025c771ee722ee341af1d84375db8a ]
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e8585182 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57edbbcf5258c378a9b9d0c80d33b03a010b22c8 ]
The histogram support mixes _irqsave and _irq, causing the following
smatch warning:
drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming()
warn: mixing irqsave and irq
The histo_stop_streaming() calls spin_lock_irqsave() followed by
wait_event_lock_irq(). The former hints that interrupts may be disabled
by the caller, while the latter reenables interrupts unconditionally.
This doesn't cause any real bug, as the function is always called with
interrupts enabled, but the pattern is still incorrect.
Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave()
in histo_stop_streaming(). While at it, switch to spin_lock_irq() and
spin_lock() as appropriate elsewhere.
Fixes: 99362e32332b ("[media] v4l: vsp1: Add histogram support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6d64d0d2897ed4e85ac00afe43e45c8b8fc0c44 ]
Cleanup the V4L2 subdevice in the driver's remove function to
ensure its async connection are freed, and guarantee in future that
the subdev active state is cleaned up.
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-4-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9caf253e8ad6f4c66f5591bac900f9f68b6b6620 ]
The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R
BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN
driver and are thus disallowed when capturing frames from the R-Car
CSI-2 interface according to the hardware manual.
As the 1X16 format variants are meant to be used with serial busses they
have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing
from CSI-2, which is a valid setting for CSI-2.
Commit 78b3f9d75a62 ("media: rcar-vin: Add check that input interface
and format are valid") disallowed capturing YUV16 when using the CSI-2
interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in
use.
Fixes: 78b3f9d75a62 ("media: rcar-vin: Add check that input interface and format are valid")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-2-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86419686e66da5b90a07fb8a40ab138fe97189b5 ]
When the UVC device has a control that is readonly it doesn't set the
SET_CUR flag. For example the privacy control has SET_CUR flag set in
the defaults in the `uvc_ctrls` variable. Even if the device does not
have it set, it's not cleared by uvc_ctrl_get_flags().
Originally written with assignment in commit 859086ae3636 ("media:
uvcvideo: Apply flags from device to actual properties"). But changed to
|= in commit 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable
flags"). It would not clear the default flags.
With this patch applied the correct flags are reported to user space.
Tested with:
```
> v4l2-ctl --list-ctrls | grep privacy
privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only
```
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Fixes: 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags")
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240602065053.36850-1-dhs@frame.work
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d8683b3fd93f0e378f24dc3d9604e5d7d3e0a17 ]
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f29f6537f54d74e64bac0a390fb2e26da25800d ]
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference.
Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-2-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d35c34bb32f2cc4ec0b52e91ad7a8fcab55d7856 ]
Remove uses of deprecated page APIs, and move the check for large
folios to here to avoid taking the folio lock if the folio is too large.
We could do better here by attempting to split the large folio, but I'll
leave that improvement for someone who can test it.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240322161149.2327518-3-willy@infradead.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Stable-dep-of: 3f29f6537f54 ("s390/uv: Don't call folio_wait_writeback() without a folio reference")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 259e660d91d0e7261ae0ee37bb37266d6006a546 ]
These page APIs are deprecated, so convert the incoming page to a folio
and use the folio APIs instead. The ultravisor API cannot handle large
folios, so return -EINVAL if one has slipped through.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240322161149.2327518-2-willy@infradead.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Stable-dep-of: 3f29f6537f54 ("s390/uv: Don't call folio_wait_writeback() without a folio reference")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b4667ea67854f0b116fe22ad11ef5628c5b5b5f ]
In v4l2_async_create_ancillary_links(), ancillary links are created for
lens and flash sub-devices. These are sub-device to sub-device links and
if the async notifier is related to a V4L2 device, the source sub-device
of the ancillary link is NULL, leading to a NULL pointer dereference.
Check the notifier's sd field is non-NULL in
v4l2_async_create_ancillary_links().
Fixes: aa4faf6eb271 ("media: v4l2-async: Create links during v4l2_async_match_notify()")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
[Sakari Ailus: Reword the subject and commit messages slightly.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1956bf53a2774014ee1768b484af2c38c633a25 ]
Currently we have the following algorithm to calculate what value should be
written to the exposure control of imx412.
lpfr = imx412->vblank + imx412->cur_mode->height;
shutter = lpfr - exposure;
The 'shutter' value is given to IMX412_REG_EXPOSURE_CIT however, the above
algorithm will result in the value given to IMX412_REG_EXPOSURE_CIT
decreasing as the requested exposure value from user-space goes up.
e.g.
[ 2255.713989] imx412 20-001a: Received exp 1608, analog gain 0
[ 2255.714002] imx412 20-001a: Set exp 1608, analog gain 0, shutter 1938, lpfr 3546
[ 2256.302770] imx412 20-001a: Received exp 2586, analog gain 100
[ 2256.302800] imx412 20-001a: Set exp 2586, analog gain 100, shutter 960, lpfr 3546
[ 2256.753755] imx412 20-001a: Received exp 3524, analog gain 110
[ 2256.753772] imx412 20-001a: Set exp 3524, analog gain 110, shutter 22, lpfr 3546
This behaviour results in the image having less exposure as the requested
exposure value from user-space increases.
Other sensor drivers such as ov5675, imx218, hid556 and others take the
requested exposure value and use the value directly.
Take the example of the above cited sensor drivers and directly apply the
requested exposure value from user-space. The 'lpfr' variable still
functions as before but the 'shutter' variable can be dispensed with as a
result.
Once done a similar run of the test application requesting higher exposure
looks like this, with 'exp' written directly to the sensor.
[ 133.207884] imx412 20-001a: Received exp 1608, analog gain 0
[ 133.207899] imx412 20-001a: Set exp 1608, analog gain 0, lpfr 3546
[ 133.905309] imx412 20-001a: Received exp 2844, analog gain 100
[ 133.905344] imx412 20-001a: Set exp 2844, analog gain 100, lpfr 3546
[ 134.241705] imx412 20-001a: Received exp 3524, analog gain 110
[ 134.241775] imx412 20-001a: Set exp 3524, analog gain 110, lpfr 3546
The result is then setting the sensor exposure to lower values results in
darker, less exposure images and vice versa with higher exposure values.
Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver")
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5/imx577
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24147897507cd3a7d63745d1518a638bf4132238 ]
Lets fix a race between mutex_is_lock() and mutex_lock().
<-mutex is not locked
if (!mutex_is_locked(&ictx->lock)) {
unlock = true; <- mutex is locked externaly
mutex_lock(&ictx->lock);
}
Let's use mutex_trylock() that does mutex_is_lock() and mutex_lock()
atomically.
Fix the following cocci warning:
drivers/media/rc/imon.c:1167:1-7: preceding lock on line 1153
Fixes: 23ef710e1a6c ("[media] imon: add conditional locking in change_protocol")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c ]
Infinite log printing occurs during fuzz test:
rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ...
...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ...
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
...
dvb-usb: bulk message failed: -22 (1/0)
Looking into the codes, there is a loop in dvb_usb_read_remote_control(),
that is in rc_core_dvb_usb_remote_init() create a work that will call
dvb_usb_read_remote_control(), and this work will reschedule itself at
'rc_interval' intervals to recursively call dvb_usb_read_remote_control(),
see following code snippet:
rc_core_dvb_usb_remote_init() {
...
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
...
}
dvb_usb_read_remote_control() {
...
err = d->props.rc.core.rc_query(d);
if (err)
err(...) // Did not return even if query failed
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
}
When the infinite log printing occurs, the query callback
'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to
the failure of finding a valid 'generic_bulk_ctrl_endpoint'
in usb_bulk_msg(), see following code snippet:
cxusb_rc_query() {
cxusb_ctrl_msg() {
dvb_usb_generic_rw() {
ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint),...);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
...
}
...
}
By analyzing the corresponding USB descriptor, it shows that the
bNumEndpoints is 0 in its interface descriptor, but
the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure
a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this
'invalid' USB device should be rejected before it calls into
dvb_usb_read_remote_control().
To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'.
And as Sean suggested, the same check and clear halts should be done for
'generic_bulk_ctrl_endpoint_response'. So introduce
dvb_usb_check_bulk_endpoint() to do it for both of them.
Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 629913d6d79508b166c66e07e4857e20233d85a9 ]
In case DMA fails, 'dma->SG_length' is 0. This value is later used to
access 'dma->SGarray[dma->SG_length - 1]', which will cause out of
bounds access.
Add check to return early on invalid value. Adjust warnings accordingly.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1932dc2f4cf6 ("media: pci/ivtv: switch from 'pci_' to 'dma_' API")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6320b9199dd99622668649c234d4e8a99e44a9c8 ]
The mipi_dsi_dcs_nop() function returns an error but we weren't
checking it in boe_panel_prepare(). Add a check. This is highly
unlikely to matter in practice. If the NOP failed then likely later
MIPI commands would fail too.
Found by code inspection.
Fixes: 812562b8d881 ("drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1446226d32a45bb7c4f63195a59be8c08defe658 ]
The following commit updated gmc->noretry from 0 to 1 for GC HW IP
9.3.0:
commit 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
This causes the device to hang when a page fault occurs, until the
device is rebooted. Instead, revert back to gmc->noretry=0 so the device
is still responsive.
Fixes: 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
Signed-off-by: Tim Van Patten <timvp@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cdb3f9740844b9d95ca413e3fcff11f81223ecf ]
The special case for VM passthrough doesn't check adev->nbio.funcs
before dereferencing it. If GPUs that don't have an NBIO block are
passed through, this leads to a NULL pointer dereference on startup.
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Fixes: 1bece222eabe ("drm/amdgpu: Clear doorbell interrupt status for Sienna Cichlid")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6420021e17e262c57bb289d0556ee181b014f9c ]
Fix the field definitions for LC_CURRENT_DATA_RATE.
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b03829fdece47beba9ecb7dbcbde4585ee3663e ]
The mipi_dsi_dcs_write_seq() macro makes a call to
mipi_dsi_dcs_write_buffer() which returns a type ssize_t. The macro
then stores it in an int and checks to see if it's negative. This
could theoretically be a problem if "ssize_t" is larger than "int".
To see the issue, imagine that "ssize_t" is 32-bits and "int" is
16-bits, you could see a problem if there was some code out there that
looked like:
mipi_dsi_dcs_write_seq(dsi, cmd, <32767 bytes as arguments>);
...since we'd get back that 32768 bytes were transferred and 32768
stored in a 16-bit int would look negative.
Though there are no callsites where we'd actually hit this (even if
"int" was only 16-bit), it's cleaner to make the types match so let's
fix it.
Fixes: 2a9e9daf7523 ("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1868b93fad5938dbcca77286b25bf211c49f7a ]
If a port is blocking in the common instance but forwarding in an MST
instance, traffic egressing the bridge will be dropped because the
state of the common instance is overriding that of the MST instance.
Fix this by skipping the port state check in MST mode to allow
checking the vlan state via br_allowed_egress(). This is similar to
what happens in br_handle_frame_finish() when checking ingress
traffic, which was introduced in the change below.
Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Signed-off-by: Elliot Ayrey <elliot.ayrey@alliedtelesis.co.nz>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a931c5b732ca5fc2ca727f5a72aeabaafa85ec ]
If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().
If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.
To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.
If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().
Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20
To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.
Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67a90a0c8f5b3d0acc18f10650d90fec44775f9 ]
Lately, an additional locking was added by commit c0a40097f0bc
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7866c35873377313ff94398f17d425b28b71de1 ]
When loading a EXT program without specifying `attr->attach_prog_fd`,
the `prog->aux->dst_prog` will be null. At this time, calling
resolve_prog_type() anywhere will result in a null pointer dereference.
Example stack trace:
[ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 8.108262] Mem abort info:
[ 8.108384] ESR = 0x0000000096000004
[ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits
[ 8.108722] SET = 0, FnV = 0
[ 8.108827] EA = 0, S1PTW = 0
[ 8.108939] FSC = 0x04: level 0 translation fault
[ 8.109102] Data abort info:
[ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000
[ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000
[ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 8.112783] Modules linked in:
[ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1
[ 8.113230] Hardware name: linux,dummy-virt (DT)
[ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0
[ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8
[ 8.113798] sp : ffff80008283b9f0
[ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001
[ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000
[ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000
[ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff
[ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
[ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4
[ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f
[ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c
[ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000
[ 8.114126] Call trace:
[ 8.114159] may_access_direct_pkt_data+0x24/0xa0
[ 8.114202] bpf_check+0x3bc/0x28c0
[ 8.114214] bpf_prog_load+0x658/0xa58
[ 8.114227] __sys_bpf+0xc50/0x2250
[ 8.114240] __arm64_sys_bpf+0x28/0x40
[ 8.114254] invoke_syscall.constprop.0+0x54/0xf0
[ 8.114273] do_el0_svc+0x4c/0xd8
[ 8.114289] el0_svc+0x3c/0x140
[ 8.114305] el0t_64_sync_handler+0x134/0x150
[ 8.114331] el0t_64_sync+0x168/0x170
[ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403)
[ 8.118672] ---[ end trace 0000000000000000 ]---
One way to fix it is by forcing `attach_prog_fd` non-empty when
bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type`
API broken which use verifier log to probe prog type and will log
nothing if we reject invalid EXT prog before bpf_check().
Another way is by adding null check in resolve_prog_type().
The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to
prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted
to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before
that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows
the logic below:
prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type;
It implies that when EXT program is not yet attached to `dst_prog`,
the prog type should be EXT itself. This code worked fine in the past.
So just keep using it.
Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog`
is not present in resolve_prog_type().
Fixes: 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20240711145819.254178-2-wutengda@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2454075f8e2915cebbe52a1195631bc7efe2b7e1 ]
As reported by Mirsad [1] we still see format warnings in kernel/bpf/btf.o
at W=1 warning level:
CC kernel/bpf/btf.o
./kernel/bpf/btf.c: In function ‘btf_type_seq_show_flags’:
./kernel/bpf/btf.c:7553:21: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7553 | sseq.showfn = btf_seq_show;
| ^
./kernel/bpf/btf.c: In function ‘btf_type_snprintf_show’:
./kernel/bpf/btf.c:7604:31: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7604 | ssnprintf.show.showfn = btf_snprintf_show;
| ^
Combined with CONFIG_WERROR=y these can halt the build.
The fix (annotating the structure field with __printf())
suggested by Mirsad resolves these. Apologies I missed this last time.
No other W=1 warnings were observed in kernel/bpf after this fix.
[1] https://lore.kernel.org/bpf/92c9d047-f058-400c-9c7d-81d4dc1ef71b@gmail.com/
Fixes: b3470da314fd ("bpf: annotate BTF show functions with __printf")
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Suggested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240712092859.1390960-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9741a03dc8e491e57b95fba0058ab46b7e506da ]
To have enough space to write all possible sprintf() args. Currently
'name' size is 16, but the first '%s' specifier may already need at
least 16 characters, since 'bnad->netdev->name' is used there.
For '%d' specifiers, assume that they require:
* 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8
* 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX
is 16
And replace sprintf with snprintf.
Detected using the static analysis tool - Svace.
Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
