IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit 9ed2c993d7.
SET_CONFIG_REG writes to memory if register shadowing is enabled,
causing a VM fault.
NGG streamout is unstable anyway, so all UMDs should use legacy
streamout. I think Mesa is the only driver using NGG streamout.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Tested-by: Paul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vcn dpm on is a prerequisite for vcn power gate control.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
too frequently to update mertrics table will cause smu internal error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this change, the fan control state on smu_v11 was not able to be
changed because the capability check for checking if the fan control
capability existed was inverted.
[How]
The capability check for fan control in smu_v11_0_auto_fan_control was
inverted, to correctly check for the absence, instead of presence of fan
control capabilities.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
. use dev_get_drvdata for readability instead of platform_get_drvdata
. remove redundant assignment to node.
- Two fixup patches
. fix undefined reference to 'vmf_insert_mixed' with NOMMU configuration.
. fix potential infinite spin issue by decrementing 'retry' variable in
scaler_reset function of exynos_drm_scaler.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Qqyg
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Two cleanup patches
. use dev_get_drvdata for readability instead of platform_get_drvdata
. remove redundant assignment to node.
- Two fixup patches
. fix undefined reference to 'vmf_insert_mixed' with NOMMU configuration.
. fix potential infinite spin issue by decrementing 'retry' variable in
scaler_reset function of exynos_drm_scaler.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564734791-745-1-git-send-email-inki.dae@samsung.com
commit 7e9e5ead55 ("drm/vgem: fix cache synchronization on arm/arm64")
broke all of the !llc i915-vgem coherency tests in CI, and left the HW
very, very unhappy (which is even more scary).
Fixes: 7e9e5ead55 ("drm/vgem: fix cache synchronization on arm/arm64")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801124458.24949-1-chris@chris-wilson.co.uk
- Fix some build errors in drm/bridge.
- Do not build i810 on CONFIG_PREEMPTION.
- Fix cache sync on arm in vgem.
- Allow mapping fb in drm_client only when required, and use it to fix bochs fbdev.
-----BEGIN PGP SIGNATURE-----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=oX0Q
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3-rc3:
- Fix some build errors in drm/bridge.
- Do not build i810 on CONFIG_PREEMPTION.
- Fix cache sync on arm in vgem.
- Allow mapping fb in drm_client only when required, and use it to fix bochs fbdev.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af0dc371-16e0-cee8-0d71-4824d44aa973@linux.intel.com
Currently the retry counter is not being decremented, leading to a
potential infinite spin if the scalar_reads don't change state.
Addresses-Coverity: ("Infinite loop")
Fixes: 280e54c9f6 ("drm/exynos: scaler: Reset hardware before starting the operation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Compile-testing this driver on a NOMMU configuration shows a link failure:
drivers/gpu/drm/exynos/exynos_drm_gem.o: In function `exynos_drm_gem_fault':
exynos_drm_gem.c:(.text+0x484): undefined reference to `vmf_insert_mixed'
Add a CONFIG_MMU dependency to ensure we only enable this in configurations
that build correctly.
Many other drm drivers have the same dependency. It would be nice to
make this work in MMU-less configurations, but evidently nobody has
ever needed this so far.
Fixes: 156bdac990 ("drm/exynos: trigger build of all modules")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
The pointer 'node' is being assigned with a value that is never
read and is re-assigned later. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
Several drivers cast a struct device pointer to a struct
platform_device pointer only to then call platform_get_drvdata().
To improve readability, these constructs can be simplified
by using dev_get_drvdata() directly.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFKBAABCgA0FiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAl1DQ3MWHHNlYW5wYXVs
QGNocm9taXVtLm9yZwAKCRCW9w39qEoHCtmoB/9Qesjz6sh2CZ8PhehHi2hLniiY
33ojx73lPkAPY2INbSTMiPFyCRvB9emvIYG68nkHNX+Ey7ZjQIzXenuzFLLFfO5P
jS3phHs2UtFfMAfOaxApF11vtnwzGQu3GqpLnoC80DzcLzpDAXJgaV608LcTwzug
48NHVvG7pzOKyPOyVQG5q/YJ1H8hqr7rxSdAfOlradCwoo3PoNxIU2ieqF0YrrmV
nn18E4XpTS9PRS+zxl4KPVIivHg1HS+Ii23V6C+y5fPEW/lVO2WOahm1wW/WD5Mt
07o0WOZkU4qLjAmLyWgmzpLlZ/Scl2WIhje2Z5EkpD+o7wVlOaqA2tge3OTZ
=aA5E
-----END PGP SIGNATURE-----
Merge tag 'msm-fixes-2019_08_01' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
- Fix the dma_sync calls applied last week (Rob)
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 02 Aug 2019 05:54:27 AM AEST
# gpg: using RSA key 96F70DFDA84A070A
# gpg: Can't check signature: public key not found
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801200439.GV104440@art_vandelay
Looks like a regression got introduced into nv50_mstc_atomic_check()
that somehow didn't get found until now. If userspace changes
crtc_state->active to false but leaves the CRTC enabled, we end up
calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in
asyh->dp.pbn. However, if the display is inactive we end up calculating
a PBN of 0, which inadvertently causes us to have an allocation of 0.
>From there, if userspace then disables the CRTC afterwards we end up
accidentally attempting to free the VCPI twice:
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
Call Trace:
drm_atomic_helper_check_modeset+0x3f3/0xa60 [drm_kms_helper]
? drm_atomic_check_only+0x43/0x780 [drm]
drm_atomic_helper_check+0x15/0x90 [drm_kms_helper]
nv50_disp_atomic_check+0x83/0x1d0 [nouveau]
drm_atomic_check_only+0x54d/0x780 [drm]
? drm_atomic_set_crtc_for_connector+0xec/0x100 [drm]
drm_atomic_commit+0x13/0x50 [drm]
drm_atomic_helper_set_config+0x81/0x90 [drm_kms_helper]
drm_mode_setcrtc+0x194/0x6a0 [drm]
? vprintk_emit+0x16a/0x230
? drm_ioctl+0x163/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
drm_ioctl_kernel+0xaa/0xf0 [drm]
drm_ioctl+0x208/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
nouveau_drm_ioctl+0x63/0xb0 [nouveau]
do_vfs_ioctl+0x405/0x660
? recalc_sigpending+0x17/0x50
? _copy_from_user+0x37/0x60
ksys_ioctl+0x5e/0x90
? exit_to_usermode_loop+0x92/0xe0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x59/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
---[ end trace 4c395c0c51b1f88d ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for
[MST PORT:00000000e288eb7d] found in mst state 000000008e642070
So, fix this by doing what we probably should have done from the start: only
call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so
that VCPI allocations remain for as long as the CRTC is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com
drm-fixes-5.3-2019-07-31:
amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs
amdkfd:
- fix memory alignment for VegaM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
Fixes: dc3ea265b8 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
The mdp5 drm/kms driver currently does not work on command-mode DSI
panels due to 'vblank wait timed out' errors. This causes a latency
of seconds, or tens of seconds in some cases, before content is shown
on the panel. This hardware does not have the something that we can use
as a frame counter available when running in command mode, so we need to
fall back to using timestamps by setting the max_vblank_count to zero.
This can be done on a per-CRTC basis, so the convert mdp5 to use
drm_crtc_set_max_vblank_count().
This change was tested on a LG Nexus 5 (hammerhead) phone.
Suggested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org
The bochs driver (and virtual hardware) requires buffer objects to
reside in video ram to display them to the screen. So it can not
display the framebuffer console because the respective buffer object
is permanently pinned in system memory.
Using a shadow buffer for the console solves this problem. The console
emulation will pin the buffer object only during updates from the shadow
buffer. Otherwise, the bochs driver can freely relocated the buffer
between system memory and video ram.
v2:
* select shadow FB via struct drm_mode_config.prefer_shadow_fbdev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315833/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes DRM clients to not map the buffer by default. The
buffer, like any buffer object, should be mapped and unmapped when
needed.
An unmapped buffer object can be evicted to system memory and does
not consume video ram until displayed. This allows to use generic fbdev
emulation with drivers for low-memory devices, such as ast and mgag200.
This change affects the generic framebuffer console. HW-based consoles
map their console buffer once and keep it mapped. Userspace can mmap this
buffer into its address space. The shadow-buffered framebuffer console
only needs the buffer object to be mapped during updates. While not being
updated from the shadow buffer, the buffer object can remain unmapped.
Userspace will always mmap the shadow buffer.
v2:
* change DRM client to not map buffer by default
* manually map client buffer for fbdev with HW framebuffer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315830/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DRM clients, such as the fbdev emulation, have their buffer objects
mapped by default. Mapping a buffer implicitly prevents its relocation.
Hence, the buffer may permanently consume video memory while it's
allocated. This is a problem for drivers of low-memory devices, such as
ast, mgag200 or older framebuffer hardware, which will then not have
enough memory to display other content (e.g., X11).
This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal
DRM clients can use these functions to unmap and remap buffer objects
as needed.
There's no reference counting for vmap operations. Callers are expected
to either keep buffers mapped (as it is now), or call vmap and vunmap
in pairs around code that accesses the mapped memory.
v2:
* remove several duplicated NULL-pointer checks
v3:
* style and typo fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315831/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.
The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk
(cherry picked from commit 18398904ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk
(cherry picked from commit de5147b8ce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.
Fixes: 79ffac8599 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
(cherry picked from commit 092be382a2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.
Change the Kconfig dependency of i810 to !CONFIG_PREEMPTION so the driver
is not accidentally built on a RT kernel.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.1907262223280.1791@nanos.tec.linutronix.de
VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No VCN DPM bit check as that's different from VCN PG. Also
no extra check for possible double enablement/disablement
as that's already done by VCN.
v2: check return value of smu_feature_set_enabled
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commonly used for VCN powergate status retrieval for SW SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN powergate status report on Raven.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN is widely used in new ASICs and different from tranditional
UVD and VCE.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PCI revision id determines the sku.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m,
building fails:
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state'
drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state'
Like TC358767, select DRM_KMS_HELPER to fix this, and
change to select DRM_PANEL to avoid recursive dependency.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:
drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dbb58bfd9a ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
Windows guest can't run after force-TDR with host log:
...
gvt: vgpu 1: workload shadow ppgtt isn't ready
gvt: vgpu 1: fail to dispatch workload, skip
...
The error is raised by set_context_ppgtt_from_shadow(), when it checks
and found the shadow_mm isn't marked as shadowed.
In work thread before each submission, a shadow_mm is set to shadowed in:
shadow_ppgtt_mm()
<-intel_vgpu_pin_mm()
<-prepare_workload()
<-dispatch_workload()
<-workload_thread()
However checking whether or not shadow_mm is shadowed is prior to it:
set_context_ppgtt_from_shadow()
<-dispatch_workload()
<-workload_thread()
In normal case, create workload will check the existence of shadow_mm,
if not it will create a new one and marked as shadowed. If already exist
it will reuse the old one. Since shadow_mm is reused, checking of shadowed
in set_context_ppgtt_from_shadow() actually always see the state set in
creation, but not the state set in intel_vgpu_pin_mm().
When force-TDR, all engines are reset, since it's not dmlr level, all
ppgtt_mm are invalidated but not destroyed. Invalidation will mark all
reused shadow_mm as not shadowed but still keeps in ppgtt_mm_list_head.
If workload submission phase those shadow_mm are reused with shadowed
not set, then set_context_ppgtt_from_shadow() will report error.
Pin for context after shadow_mm pinned and shadow pdps settled.
v2:
Move set_context_ppgtt_from_shadow() after prepare_workload(). (zhenyu)
v3:
Move set_context_ppgtt_from_shadow() after shadow pdps updated.(zhenyu)
Fixes: 4f15665ccb ("drm/i915: Add ppgtt to GVT GEM context")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
