IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit 07313a2b29ed1079eaa7722624544b97b3ead84b.
Commit 0c24e061196c21d5 ("mm: kmemleak: add rbtree and store physical
address for objects allocated with PA") is not yet in 5.19 (but appears
in 6.0). Without 0c24e061196c21d5, kmemleak still stores phys objects
and non-phys objects in the same tree, and ignoring (instead of freeing)
will cause insertions into the kmemleak object tree by the slab
post-alloc hook to conflict with the pool object (see comment).
Reports such as the following would appear on boot, and effectively
disable kmemleak:
| kmemleak: Cannot insert 0xffffff806e24f000 into the object search tree (overlaps existing)
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-v8-0815+ #5
| Hardware name: Raspberry Pi Compute Module 4 Rev 1.0 (DT)
| Call trace:
| dump_backtrace.part.0+0x1dc/0x1ec
| show_stack+0x24/0x80
| dump_stack_lvl+0x8c/0xb8
| dump_stack+0x1c/0x38
| create_object.isra.0+0x490/0x4b0
| kmemleak_alloc+0x3c/0x50
| kmem_cache_alloc+0x2f8/0x450
| __proc_create+0x18c/0x400
| proc_create_reg+0x54/0xd0
| proc_create_seq_private+0x94/0x120
| init_mm_internals+0x1d8/0x248
| kernel_init_freeable+0x188/0x388
| kernel_init+0x30/0x150
| ret_from_fork+0x10/0x20
| kmemleak: Kernel memory leak detector disabled
| kmemleak: Object 0xffffff806e24d000 (size 2097152):
| kmemleak: comm "swapper", pid 0, jiffies 4294892296
| kmemleak: min_count = -1
| kmemleak: count = 0
| kmemleak: flags = 0x5
| kmemleak: checksum = 0
| kmemleak: backtrace:
| kmemleak_alloc_phys+0x94/0xb0
| memblock_alloc_range_nid+0x1c0/0x20c
| memblock_alloc_internal+0x88/0x100
| memblock_alloc_try_nid+0x148/0x1ac
| kfence_alloc_pool+0x44/0x6c
| mm_init+0x28/0x98
| start_kernel+0x178/0x3e8
| __primary_switched+0xc4/0xcc
Reported-by: Max Schulze <max.schulze@online.de>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/all/b33b33bc-2d06-1bcd-2df7-43678962b728@online.de/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e2fb8bc7ef6c7a63ca95751b90162dece0b3f4c upstream.
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in a subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 861396ac0b47780210b72c4fea359540965a4970 upstream.
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in the subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e744351bcb9c4cee81300de5a6097100d835386 upstream.
As reported by Nathan, when building avs driver using clang with:
CONFIG_COMPILE_TEST=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_KASAN=y
CONFIG_PCI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_INTEL_AVS=y
there are reports of too big stack use, like:
sound/soc/intel/avs/path.c:815:18: error: stack frame size (2176) exceeds limit (2048) in 'avs_path_create' [-Werror,-Wframe-larger-than]
struct avs_path *avs_path_create(struct avs_dev *adev, u32 dma_id,
^
1 error generated.
This is apparently caused by inlining many calls to guid_equal which
inlines fortified memcpy, using 2 size_t variables.
Instead of hardcoding many calls to guid_equal, use lookup table with
one call, this improves stack usage.
Link: https://lore.kernel.org/alsa-devel/YtlzY9aYdbS4Y3+l@dev-arch.thelio-3990X/T/
Link: https://github.com/ClangBuiltLinux/linux/issues/1642
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220722111959.2588597-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 332f1795ca202489c665a75e62e18ff6284de077 upstream.
The patch d0be8347c623: "Bluetooth: L2CAP: Fix use-after-free caused
by l2cap_chan_put" from Jul 21, 2022, leads to the following Smatch
static checker warning:
net/bluetooth/l2cap_core.c:1977 l2cap_global_chan_by_psm()
error: we previously assumed 'c' could be null (see line 1996)
Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc18cc5e82033d406f54144ad6f8092206004684 upstream.
Potentially, someone may create as many pbuf bucket as there are indexes
in an xarray without any other restrictions bounding our memory usage,
put memory needed for the buckets under memory accounting.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d34c452e45793e978d26e2606211ec9070d329ea.1659622312.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83ee9f23763a432a4077bf20624ee35de87bce99 upstream.
clang 14 won't build because ret is uninitialised and can be returned if
both prop and fdtprop are NULL. Drop the ret variable and return an
error in that failure case.
Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810054331.373761-1-ruscur@russell.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 953503751a426413ea8aee2299ae3ee971b70d9b upstream.
This reverts commit 6f5c672d17f583b081e283927f5040f726c54598.
This breaks normal crash dump when CPU0 is offline.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e4babffa6f340a74c820d44d44d16511e666424 upstream.
min_gate_len[tc] is supposed to track the shortest interval of
continuously open gates for a traffic class. For example, in the
following case:
TC 76543210
t0 00000001b 200000 ns
t1 00000010b 200000 ns
min_gate_len[0] and min_gate_len[1] should be 200000, while
min_gate_len[2-7] should be 0.
However what happens is that min_gate_len[0] is 200000, but
min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the
point where the logic detects the gate close event for TC 1).
The problem is that the code considers a "gate close" event whenever it
sees that there is a 0 for that TC (essentially it's level rather than
edge triggered). By doing that, any time a gate is seen as closed
without having been open prior, gate_len, which is 0, will be written
into min_gate_len. Once min_gate_len becomes 0, it's impossible for it
to track anything higher than that (the length of actually open
intervals).
To fix this, we make the writing to min_gate_len[tc] be edge-triggered,
which avoids writes for gates that are closed in consecutive intervals.
However what this does is it makes us need to special-case the
permanently closed gates at the end.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220804202817.1677572-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a2dcbaf4d31023106975d6ae75b6df080c454cb upstream.
If an instance of tracing enables the same trace event as another
instance, or the top level instance, or even perf, then the va_list passed
into some tracepoints can be used more than once.
As va_list can only be traversed once, this can cause issues:
# cat /sys/kernel/tracing/instances/qla2xxx/trace
cat-56106 [012] ..... 2419873.470098: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered (null).
cat-56106 [012] ..... 2419873.470101: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered ×+<96>²Ü<98>^H.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0xde589000.
# cat /sys/kernel/tracing/trace
cat-56106 [012] ..... 2419873.470097: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered qla2x00_get_firmware_state.
cat-56106 [012] ..... 2419873.470100: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered qla2x00_mailbox_command.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0x69.
The instance version is corrupted because the top level instance iterated
the va_list first.
Use va_copy() in the __assign_vstr() macro to make sure that each trace
event for each use case gets a fresh va_list.
Link: https://lore.kernel.org/all/259d53a5-958e-6508-4e45-74dba2821242@marvell.com/
Link: https://lkml.kernel.org/r/20220719182004.21daa83e@gandalf.local.home
Fixes: 0563231f93c6d ("tracing/events: Add __vstring() and __assign_vstr() helper macros")
Reported-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6f671c8a339d5b655acfacb8be6918c744fbabf upstream.
The current check only worked for AP mode, but we can do
radar detection in mesh as well (for example). We could
try to check this using wdev_chandef(), but we also don't
really care since the chandef is passed in and we have no
need to use it anymore (since we added the argument in
commit d2859df5e7f0 ("cfg80211/mac80211: DFS setup chandef
for cac event")).
Change-Id: I856e4344d5e64ff4d2eead0b4c53b11f264be9b8
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2653990d5729a445296d6d04395be5dea8e282e upstream.
We need to hold the wdev mutex already in order to call
nl80211_parse_tx_bitrate_mask(), so acquire it earlier.
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31177127e067eb73d5ca46ce32a410e41333d42f upstream.
In many cases we might get here from driver code that's
not really set up to care about the locking, and for the
non-MLO cases we really don't care so much about it. So
relax the checking here for now, perhaps we should even
remove it completely since we might not really care if
we point to an invalid link's chandef and can require
the caller to check the link validity first.
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 206bbcf76121664e95a42e1c014c3fe168d07a3d upstream.
We need wdev_chandef() in this code, which now requires
the wdev mutex due to the per-link nature. Hold it here
to make sure we can access the link.
Reported-by: syzbot+b4e9aa0f32ffd9902442@syzkaller.appspotmail.com
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77e7b6ba78edf817bddfa97fadb15a971992b1ee upstream.
Prior to commit 7b0a0e3c3a88 ("wifi: cfg80211: do some
rework towards MLO link APIs") the interface type didn't
really matter here, but now we need to handle all of the
possible cases. Add IBSS ("ADHOC") and handle it.
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Reported-by: syzbot+90d912872157e63589e4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69d93daec026cdda98e29e8edb12534bfa5b1a9b upstream.
Similar to commit 7c80b038d23e ("net: fix sk_wmem_schedule() and
sk_rmem_schedule() errors"), let the MPTCP receive path schedule
exactly the required amount of memory.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38a523a2946d3a0961d141d477a1ee2b1f3bdbb1 upstream.
This reverts commit 77515ebaf01920e2db49e04672ef669a7c2907f2 as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au
Cc: Duoming Zhou <duoming@zju.edu.cn>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f8954e099b8ae96e7de1bb95950e00c85bedd40 upstream.
This reverts commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au
Cc: Duoming Zhou <duoming@zju.edu.cn>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97a4d46b1516250d640c1ae0c9e7129d160d6a1c upstream.
I accidentally broke IPv4 traceroute, by swapping iph->saddr
and iph->daddr.
Probably because raw_icmp_error() and raw_v4_input()
use different order for iph->saddr and iph->daddr.
Fixes: ba44f8182ec2 ("raw: use more conventional iterators")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220623193540.2851799-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4fceb46add65481ef0dfb79cad24c3c269b4cad upstream.
saddr and daddr are set but not used.
Fixes: ba44f8182ec2 ("raw: use more conventional iterators")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220622032303.159394-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6c14da474bf260d73953fbf7992c98d9112aec7 upstream.
Using 3 blocks here doesn't give us much more than using 2, and it
causes a stack frame size warning on certain compiler/config/arch
combinations:
lib/crypto/blake2s-selftest.c: In function 'blake2s_selftest':
>> lib/crypto/blake2s-selftest.c:632:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=]
632 | }
| ^
So this patch just reduces the block from 3 to 2, which makes the
warning go away.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-crypto/202206200851.gE3MHCgd-lkp@intel.com
Fixes: 2d16803c562e ("crypto: blake2s - remove shash module")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4ee118561a0f74442439b7b5b486db1ac1ddfeb upstream.
sk_forced_mem_schedule() has a bug similar to ones fixed
in commit 7c80b038d23e ("net: fix sk_wmem_schedule() and
sk_rmem_schedule() errors")
While this bug has little chance to trigger in old kernels,
we need to fix it before the following patch.
Fixes: d83769a580f1 ("tcp: fix possible deadlock in tcp_send_fin()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61922beba36adea8702fe8069b309c806f6608af upstream.
This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1.
This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-1-robert.foss@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ad36309e2719a884f946678e0296be10f0bb4c1 upstream.
When a route filter is replaced and the old filter has a 0 handle, the old
one won't be removed from the hashtable, while it will still be freed.
The test was there since before commit 1109c00547fc ("net: sched: RCU
cls_route"), when a new filter was not allocated when there was an old one.
The old filter was reused and the reinserting would only be necessary if an
old filter was replaced. That was still wrong for the same case where the
old handle was 0.
Remove the old filter from the list independently from its handle value.
This fixes CVE-2022-2588, also reported as ZDI-CAN-17440.
Reported-by: Zhenpeng Lin <zplin@u.northwestern.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Kamal Mostafa <kamal@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220809170518.164662-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb928ac192128c842f4c1cfc8b6780b95719d65f upstream.
Clang doesn't support -mprofile-kernel ABI, so guard the checks against
CONFIG_DYNAMIC_FTRACE_WITH_REGS, rather than the elf ABI version.
Fixes: 23b44fc248f4 ("powerpc/ftrace: Make __ftrace_make_{nop/call}() common to PPC32 and PPC64")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Ondrej Mosnacek <omosnacek@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/llvm/llvm-project/issues/57031
Link: https://github.com/ClangBuiltLinux/linux/issues/1682
Link: https://lore.kernel.org/r/20220809095907.418764-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18db466a9a306406dab3b134014d9f6ed642471c upstream.
Commit 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of
PPC_LWARX/LDARX macros") properly handled the eh field of lwarx
in asm/bitops.h but failed to clear it for PPC32 in
asm/simple_spinlock.h
So, do as in arch_atomic_try_cmpxchg_lock(), set it to 1 if PPC64
but set it to 0 if PPC32. For that use IS_ENABLED(CONFIG_PPC64) which
returns 1 when CONFIG_PPC64 is set and 0 otherwise.
Fixes: 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of PPC_LWARX/LDARX macros")
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Use symbolic names, use 'n' constraint per Segher]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a1176e19e627dd6a1b8d24c6c457a8ab874b7d12.1659430931.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 402c43ea6b34a1b371ffeed9adf907402569eaf5 upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c68
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e94c6101e151b019b8babc518ac2a6ada644a5a1 upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc9be616bb8f3ed9cf560308f86904f5c06be205 upstream.
Persistent grants feature can be used only when both backend and the
frontend supports the feature. The feature was always supported by
'blkback', but commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has introduced a parameter for
disabling it runtime.
To avoid the parameter be updated while being used by 'blkback', the
commit caches the parameter into 'vbd->feature_gnt_persistent' in
'xen_vbd_create()', and then check if the guest also supports the
feature and finally updates the field in 'connect_ring()'.
However, 'connect_ring()' could be called before 'xen_vbd_create()', so
later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to
'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use
'persistent grants' feature even if the guest doesn't support the
feature.
This commit fixes the issue by moving the parameter value caching to
'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct
embeds 'vbd' object, which will be used by 'connect_ring()' later, this
should be called before 'connect_ring()' and therefore this should be
the right and safe place to do the caching.
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 863ed94c589fcd1984f4e3080f069d30508044bb ]
In commit 0aa698787aa2 ("tpm: Add Upgrade/Reduced mode support for
TPM2 modules") it was said that:
"If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM
is in Failure mode."
But a check was never added in the commit when calling
tpm2_get_cc_attrs_tbl() to conclude that the TPM is in Failure mode.
This commit corrects this by adding a check.
Fixes: 0aa698787aa2 ("tpm: Add Upgrade/Reduced mode support for TPM2 modules")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed4593645366ad7362a3aa7bc0d100d8d8236a8 ]
If DEBUG_SECTION_MISMATCH enabled, __calc_tpm2_event_size() will not be
inlined, this cause section mismatch like this:
WARNING: modpost: vmlinux.o(.text.unlikely+0xe30c): Section mismatch in reference from the variable L0 to the function .init.text:early_ioremap()
The function L0() references
the function __init early_memremap().
This is often because L0 lacks a __init
annotation or the annotation of early_ioremap is wrong.
Fix it by using __always_inline instead of inline for the called-once
function __calc_tpm2_event_size().
Fixes: 44038bc514a2 ("tpm: Abstract crypto agile event size calculations")
Cc: stable@vger.kernel.org # v5.3
Reported-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0815291a8fd66cdcf7db1445d4d99b0d16065829 ]
The signature verification of SM2 needs to add the Za value and
recalculate sig->digest, which requires the detection of the pkey_algo
in public_key_verify_signature(). As Eric Biggers said, the pkey_algo
field in sig is attacker-controlled and should be use pkey->pkey_algo
instead of sig->pkey_algo, and secondly, if sig->pkey_algo is NULL, it
will also cause signature verification failure.
The software_key_determine_akcipher() already forces the algorithms
are matched, so the SM3 algorithm is enforced in the SM2 signature,
although this has been checked, we still avoid using any algorithm
information in the signature as input.
Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f8b80053a1b2fd602daa6814e62d6fa90e5e9b ]
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:
CPU1 CPU2
ext4_xattr_block_set() ext4_xattr_release_block()
new_bh = ext4_xattr_block_cache_find()
lock_buffer(bh);
ref = le32_to_cpu(BHDR(bh)->h_refcount);
if (ref == 1) {
...
mb_cache_entry_delete();
unlock_buffer(bh);
ext4_free_blocks();
...
ext4_forget(..., bh, ...);
jbd2_journal_revoke(..., bh);
ext4_journal_get_write_access(..., new_bh, ...)
do_get_write_access()
jbd2_journal_cancel_revoke(..., new_bh);
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd48e9acdf26d0cbd80051de07d4a735d05d29b2 ]
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bc0d63dad7f9f54d381925ee855b402f652fa39 ]
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8a04fe77ef1360fbf73c80fddbdfeaa9407ed1b ]
ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.
Add a sanity check to see if the logical block is already allocated and
error out if it is.
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f8ea4cd57dbd46ea13b41dc8bac03176b04233 ]
Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.
However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.
Fix it by catching the corruption early in __ext4_read_dirblock().
Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd7e672ea98b95b9d4c9dae316639f03c16a749d ]
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9fd167d57133c5b748d16913c4eabc55e531c73 ]
If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 179b14152dcb6a24c3415200603aebca70ff13af ]
When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f0d8e1d607c1a4fa9a27362a108921d82230874 ]
A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback. Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages(). That function
removes any corresponding delayed allocated blocks from the extent
status tree. If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.
Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem. Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.
Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de394a86658ffe4e89e5328fd4993abfe41b7435 ]
When doing an online resize, the on-disk superblock on-disk wasn't
updated. This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.
This was partially fixed by Commits 10b01ee92df5 ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf489
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212eac ("ext4: update the cached overhead value in
the superblock").
However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems. This commit should address the
problem when resizing file systems with the bigalloc feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a57bca9050d740ca37184302e23d0e7633e3ebc ]
Since commit 6493792d3299 ("ext4: convert symlink external data block
mapping to bdev"), create new symlink with inline_data is not supported,
but it missing to handle the leftover inlined symlinks, which could
cause below error message and fail to read symlink.
ls: cannot read symbolic link 'foo': Structure needs cleaning
EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block
2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080
(length 1)
Fix this regression by adding ext4_read_inline_link(), which read the
inline data directly and convert it through a kmalloced buffer.
Fixes: 6493792d3299 ("ext4: convert symlink external data block mapping to bdev")
Cc: stable@kernel.org
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Torge Matthies <openglfreak@googlemail.com>
Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c3d2f9388d36eb28640a220a6f908328442d873 ]
alignof() gives an alignment of types as they would be as standalone
variables. But alignment in structures might be different, and when
building the fields of events, the alignment must be the actual
alignment otherwise the field offsets may not match what they actually
are.
This caused trace-cmd to crash, as libtraceevent did not check if the
field offset was bigger than the event. The write_msr and read_msr
events on 32 bit had their fields incorrect, because it had a u64 field
between two ints. alignof(u64) would give 8, but the u64 field was at a
4 byte alignment.
Define a macro as:
ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))
which gives the actual alignment of types in a structure.
Link: https://lkml.kernel.org/r/20220731015928.7ab3a154@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abc291812d784bd4a26c01af4ebdbf9f2dbf0bb ]
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220724191650.236b1355@rorschach.local.home
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2727cfe4072a35ce813e3708f74c135de7da8897 ]
We forget to set cft->private for numa stat file. As a result, numa stat
of hstates[0] is always showed for all hstates. Encode the hstates index
into cft->private to fix this issue.
Link: https://lkml.kernel.org/r/20220723073804.53035-1-linmiaohe@huawei.com
Fixes: f47761999052 ("hugetlb: add hugetlb.*.numa_stat file")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
