IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
-----BEGIN PGP SIGNATURE-----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=DIsx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Qs5q
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree changes for v6.9
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
* tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
ARM: dts: qcom: samsung-matisse-common: Add UART
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
ARM: dts: qcom: msm8960: declare SAW2 regulators
ARM: dts: qcom: apq8064: declare SAW2 regulators
ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
...
Link: https://lore.kernel.org/r/20240304033507.89751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few device tree warning fixes, updates to use https links, and
add system-power-controller property for omap4-panda and
omap4-epson-embt2ws.
-----BEGIN PGP SIGNATURE-----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=oqWD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/yf8
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.9 merge window
Few device tree warning fixes, updates to use https links, and
add system-power-controller property for omap4-panda and
omap4-epson-embt2ws.
* tag 'omap-for-v6.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-panda-common: Enable powering off the device
ARM: dts: omap-embt2ws: system-power-controller for bt200
ARM: dts: omap: Switch over to https:// url
ARM: dts: ti: omap: add missing abb_{mpu,ivahd,dspeve,gpu} unit addresses for dra7 SoC
ARM: dts: ti: omap: add missing sys_32k_ck unit address for dra7 SoC
ARM: dts: ti: omap: add missing phy_gmii_sel unit address for dra7 SoC
Link: https://lore.kernel.org/r/pull-1709102762-376748@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clearfog GTR has an official enclosure with labels for all interfaces.
The "lan" ports on the 8-port switch in device-tree were numbered in
reverse wrt. enclosure.
Update all device-tree labels to match.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Clearfog GTR L8 has an extra SFP connector on the managed switch port 9.
Add descriptions for both entities along with pinctrl.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZdzYNwAKCRCejrg/N2X7
/SUvAP0ZzfQrUHYKMFZdU7lURoEfXeViXYUe+Lt0AMk/9JNEtgEA56z+MxKBj7s/
SF/606oWinPTxmfzjfVqMe0PRc5QIgw=
=Hq32
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+mcN
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.9
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add sama7g5 compatible
ARM: dts: microchip: sam9x60: align dmas to the opening '<'
ARM: dts: microchip: sama7g5: align dmas to the opening '<'
ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
ARM: dts: microchip: sama7g5: Add flexcom 10 node
dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
-----BEGIN PGP SIGNATURE-----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=4Z+H
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PpqJ
-----END PGP SIGNATURE-----
Merge tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Add PowerVR Series5 SGX GPUs for the TI SoCs
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
* tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU
ARM: dts: DRA7xx: Add device tree entry for SGX GPU
ARM: dts: AM437x: Add device tree entry for SGX GPU
ARM: dts: AM33xx: Add device tree entry for SGX GPU
ARM: dts: omap5: Add device tree entry for SGX GPU
ARM: dts: omap4: Add device tree entry for SGX GPU
ARM: dts: omap3: Add device tree entry for SGX GPU
dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
Link: https://lore.kernel.org/r/pull-1708943489-872615@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXb+44UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7XrggAlnkIk0aNw4wTD2OLflPHgE0gD3PR
D2kn+tXx7iUEIv0JM7x4I4aOUOmZIKKSPn1KdJa1kyUAOxgrQR7bs80jsmmmSi57
GvVsAR7F/a7enOW1rQXqrCmWJgckD1d5Lb+z5b4JnkQsqQSbTwiyHwIzkRvlAGHK
zmuN5JSgYt0PKNYd5YylP0uvbnE0aYsDFyRhMxvRYNayb0t1w2gMoGDKc7mHrhXb
84hU9koauUNtzVH2xGH6G2P6PmdOJ6OhQoPIQ+ZCOWvBlAtKzelGGgaySFO3EKAu
RkZXqFi1RDofabwZq+aEXFFY7aNEHwkjLdYj0pFiAPRIhJ7cIrRUAGD+tg==
=7WYT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZRvF
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXb9SsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5mZggAn8fEfOw9G4uRmOQFee2aEtofqu48
bwd3dZyQVShJgJh6AgEQ1QeEvYOvpzIOmugleDMrcxAINuJ3YJfAPtY8dtrIcx88
0ZRiceeRKQVqI4h2HpJ/t0HRs8XsjadnnFtEtiJXt6YYmALk4cBVGzGbuDI6au66
HZ4HGqM4LGQUSVclV43vt7rZdXxewcLkBgQ5hOsQwQ2rzAWF5uTPRQF8I1kXkBN4
gHRamiwV6fqttHimMZNOhvLzl4Hmv5gcAWCIs9iD7nDLIY5VN0j9aiNunynWmA83
A7zGea4Sb/vbHt0dCcCDFwZ4z8rAewoSrCguaJ7h5xugjUWjckkPyQ/JYg==
=+Fvs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXhw1oACgkQYKtH/8kJ
UidaMw//Q2rzALCWUvO8Neee9IBzyiC5D+tb66a2olkeR+4hYNuMnyVGBP5c3uwk
eXAptmVel2dGdeoJ7W9MMcaAER7K/r9jHCWtSW9rJt7eHPBqsZVxlwfhztaJzGvQ
VxOX2yXdrcBLw+X7hBSKrjqCXnwSVlBW0e8Bh5KPfxUowr40V5PArGT9bpt0cPDi
lW0HQvjnaocA0gJwXmtaVvoSg6C0F9iMYvzB+7aEAcH31unaeu64jRt+LZlDQlvr
dyfI1jEKBOMncfJ4YaXi+eB0yQadv4Cw8agN7AqStXAT1oJNestZCKe1o3C2yZij
Spaz1ydjukRwlU7oKU0b/BKZQxEB2yMDzCURkXpNAm9+TkruidD7xtyOJ7O9T/uz
2F3qwc7oQu0EBX1/Uj7ruEadrKMKHm8/P8K4ojXZ3kTv05I7YvXekAvoGhaJ8wrv
2ou4+MjScpbSrOONtMRoCMBWWYNFBF1j9TmQtgmhf7afcO918f1jqmvt3OvRI7pr
wAKt/aTlHWIP62GfxDyLOXp3QQdq/I9xqUkagxUYowHCWuSoEMC68ZxKCVs7Ut7e
XEcqTTrizyx6k3ErRhznfZSGOfkH48moGl20yjYM+GLl/zLFcwlwyKkiSPpPubND
KUGY9+9EEtIHxHnoLSQW/zzWSHAonsq/ojCkUvIerld4jA68Ce4=
=iYGr
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
* tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: nxp: imx: fix weim node name
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6ul: Set macaddress location in ocotp
ARM: dts: imx53-qsb: add support for the HDMI expander
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ARM: dts: imx6: skov: add aliases for all ethernet nodes
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
...
Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
-----BEGIN PGP SIGNATURE-----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=LM9R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+uiX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to
help accelerate debugging efforts. The calculations are all just sitting
in registers anyway, so pass them along to the function to be reported.
For example, before:
detected buffer overflow in memcpy
and after:
memcpy: detected buffer overflow: 4096 byte read of buffer size 1
Link: https://lore.kernel.org/r/20230407192717.636137-10-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
-----BEGIN PGP SIGNATURE-----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=c6vf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y+q1
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.9-rc1
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
* tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
ARM: tegra: Add device-tree for LG Optimus Vu (P895)
ARM: tegra: nexus7: Add missing clock binding into sound node
ARM: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and
HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC,
- Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray
Hawk Single development board,
- Fix PCIe power on ULCB development boards equipped with the
Shimafuji Kingfisher extension,
- Add PSCI support for the RZ/G3S SoC,
- Add camera support for the RZ/G2UL SMARC EVK development board,
- Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK
development boards,
- Miscellaneous fixes and improvements,
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZdh7QwAKCRCKwlD9ZEnx
cDxcAQDLIZaS/ODio5p/KmIGwi/5tuY1dK/FOMwkmOuOvlTSSwD+PsYBDEhr98of
Mz7woOMUnMh0/SbCgggd69u4KLnbwAs=
=IcGX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fAmU
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9 (take two)
- Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and
HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC,
- Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray
Hawk Single development board,
- Fix PCIe power on ULCB development boards equipped with the
Shimafuji Kingfisher extension,
- Add PSCI support for the RZ/G3S SoC,
- Add camera support for the RZ/G2UL SMARC EVK development board,
- Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK
development boards,
- Miscellaneous fixes and improvements,
* tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (31 commits)
arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI
arm64: dts: renesas: r9a07g054: Add DU node
arm64: dts: renesas: r9a07g044: Add DU node
arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
arm64: dts: renesas: r8a779h0: Add RPC node
arm64: dts: renesas: r8a779h0: Add DMA support
arm64: dts: renesas: gray-hawk-single: Add eMMC support
arm64: dts: renesas: r8a779h0: Add SD/MMC node
ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
arm64: dts: renesas: gray-hawk-single: Add Ethernet support
arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
arm64: dts: renesas: r9a08g045: Add PSCI support
arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
arm64: dts: renesas: r8a779h0: Add CA76 operating points
arm64: dts: renesas: r8a779h0: Add CPU core clocks
...
Link: https://lore.kernel.org/r/cover.1708687134.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
-----BEGIN PGP SIGNATURE-----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=hncO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ah8J
-----END PGP SIGNATURE-----
Merge tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the node names of the DSA switch in DIR-685.
- Fix the node names of the Vitesse DSA switches.
- Fix up the Wiligear compatible strings
- Use KEY_RESTART where applicable.
-----BEGIN PGP SIGNATURE-----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=47BO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=O15M
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini DTS changes for the v6.9 kernel:
- Fix the node names of the DSA switch in DIR-685.
- Fix the node names of the Vitesse DSA switches.
- Fix up the Wiligear compatible strings
- Use KEY_RESTART where applicable.
* tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Fix switch node names on Vitesse switches
ARM: dts: gemini: Map reset keys to KEY_RESTART
ARM: dts: gemini: Fix wiligear compatible strings
ARM: dts: gemini: Fix switch node names in the DIR-685
Link: https://lore.kernel.org/r/CACRpkdYQv9cyCZyjgQB4FTrxek9Hfu4EZ3syfHqHF7P6gzddvA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Marvell MMP2: Very old issue, for which I sent patch back in 2014.
Patch was never picked up and now another try to fix the same
happened, so here it goes: use proper compatible MAX8925.
2. Marvell Dove: add proper unit-addresses.
3. TI DA850: add MMC interrupts.
4. STI: minor white-space fixes.
-----BEGIN PGP SIGNATURE-----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=YXMH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3tRR
-----END PGP SIGNATURE-----
Merge tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.9
1. Marvell MMP2: Very old issue, for which I sent patch back in 2014.
Patch was never picked up and now another try to fix the same
happened, so here it goes: use proper compatible MAX8925.
2. Marvell Dove: add proper unit-addresses.
3. TI DA850: add MMC interrupts.
4. STI: minor white-space fixes.
* tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: minor whitespace cleanup around '='
ARM: dts: da850: add MMD SDIO interrupts
ARM: dts: marvell: dove-cubox: fix si5351 node names
arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
Link: https://lore.kernel.org/r/20240218182656.32103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcYyKAAKCRCKwlD9ZEnx
cFKXAP9Irv4ndzv+HVaJQb9PzNUygshSLPw9+HR7dRn8E63X3wD6AxlgN8AVMxzp
FEF/6VMMzJ9lxKMh+1G4qjVL1xyi9Qg=
=UXce
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B1Cf
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cyclic redundancy check calculation unit (CRC) peripheral
offers a CRC-based operation (CRC32/CRC32C) used to verify data
transmission or storage integrity.
This peripheral is integrated in stm32mp131 and can be default
enabled.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
As reported in the section 8.3 (i. e. Board revision history) of document
UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes
related to the board revision addressed by the patch:
- Board MB1166 revision A-09:
- LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK
The patch adds the DTS support for the new display which belongs to the
the Novatek NT35510-based panel family.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The patch adds display support on the stm32f769-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
In the schematics of document UM2033, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add support for MIPI DSI Host controller. Since MIPI DSI is not
available on stm32f746, the patch adds the "stm32f769.dtsi" file
containing the dsi node inside.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
ARCH_BCM_MOBILE is the only platform that selects CONFIG_TICK_ONESHOT,
the others stopped 12 years ago in commit 98fab064d321 ("ARM: Remove
unnecessary selection of TICK_ONESHOT").
This inconsistency caused a build regression after an otherwise
correct change to the timers subsystem:
kernel/time/tick-sched.c:1599:6: error: redefinition of 'tick_sched_timer_dying'
1599 | void tick_sched_timer_dying(int cpu)
| ^
kernel/time/tick-sched.h:111:20: note: previous definition is here
111 | static inline void tick_sched_timer_dying(int cpu) { }
Drop this dead select.
Fixes: 3aedb7fcd88a ("tick/sched: Remove useless oneshot ifdeffery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240228123850.3499024-2-arnd@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Historically AM33xx performed warm software reset even though requested
(and default) was REBOOT_COLD. Reflect the de-facto default mode in
/sys/kernel/reboot/mode correctly and implement the real REBOOT_COLD
(if configured explicitly).
Tested-by: Matthias Michel <matthias.michel@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Message-ID: <20240221154614.3549951-2-alexander.sverdlin@siemens.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
AM33XX_PRM_RSTCTRL_OFFSET is already defined in prm33xx.h and
AM33XX_RST_GLOBAL_WARM_SW_MASK in prm-regbits-33xx.h.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Message-ID: <20240221154614.3549951-1-alexander.sverdlin@siemens.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In some instances the kernel fails to detect the sdio wifi module
in the Sonoff iHost.
Tweak sdio properties to improve detection of rtl8723ds wifi module
Signed-off-by: Tim Lunn <tim@feathertop.org>
Link: https://lore.kernel.org/r/20240215110425.934740-3-tim@feathertop.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Various control signals such as sfp module-absence, pci-e reset or led
gpios were missing pinctrl nodes, leaving any u-boot choices in place.
Since U-Boot is shared between multiple board variants, i.e. a388
clearfog pro / base, clearfog gtr l8 / s4, it is better to explicitly
configure functions.
Add explicit pinctrl entries for all gpios currently in use.
Additionally the loss-of-signal gpio specified is invalid, in fact los
only has a pull-up on the board but no gpio connection to the cpu.
Remove this stray reference.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Most arm board have a board-specific compatible string that allows e.g.
userspace to match specific firmware variants or apply specific
policies.
Add board-specific properties to both variants of the Clearfog GTR:
- solidrun,clearfog-gtr-l8
- solidrun,clearfog-gtr-s4
Introduction of a common parent (e.g. "solidrun,clearfog-gtr") is
omitted for brevity.
Since announcement of the two products no additional variants were added
it is assumed that there will always be just two.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Armada 388 Clearfog ("armada-388-clearfog.dts)" is a legacy filename for
the Armada 388 Clearfog Pro ("armada-388-clearfog-pro.dts").
The "Pro" suffix was only used when the smaller version, the "Base" got
released.
The two names refer to exactly the same hardware, therefore they should
share the same compatible strings.
Copy "solidrun,clearfog-pro-a1" compatible from the -pro dts and add it
to this legacy file.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
As the TWL6030 chip is the main power controller here, declare
it as system-power-controller
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-5-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Configure the TWL6032 as system power controller to let the device
power off.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-4-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move the pending urls back to https:// and mark the ones that are no
longer accessible (http or https) as defunct.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <20240109195500.3833121-1-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
abb_{mpu,ivahd,dspeve,gpu} have 'reg' so they must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/regulator-abb-mpu: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-ivahd: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-dspeve: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-gpu: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-3-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
sys_32k_ck node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/clocks/clock-sys-32k: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-2-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
phy_gmii_sel node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/phy-gmii-sel: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-1-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For the clksel clocks we are still using the legacy ti,bit-shift property
instead of the standard reg property. We can now use the reg property, so
let's do that for the clksel clocks.
To add the reg property, we switch to use #address-cells = <1>.
For now let's not update the clock-dss-tv-fck as it seems to share the same
register bit as the clock-dss-96m-fck and would introduce more warnings.
Cc: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For the clksel clocks we are still using the legacy ti,bit-shift property
instead of the standard reg property. We can now use the reg property, so
let's do that for the clksel clocks.
To add the reg property, we switch to use #address-cells = <1>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
PJ4 is a v7 core that incorporates a iWMMXt coprocessor. However, GCC
does not support this combination (its iWMMXt configuration always
implies v5te), and so there is no v6/v7 user space that actually makes
use of this, beyond generic support for things like setjmp() that
preserve/restore the iWMMXt register file using generic LDC/STC
instructions emitted in assembler. As [0] appears to imply, this logic
is triggered for the init process at boot, and so most user threads will
have a iWMMXt register context associated with it, even though it is
never used.
At this point, it is highly unlikely that such GCC support will ever
materialize (and Clang does not implement support for iWMMXt to begin
with).
This means that advertising iWMMXt support on these cores results in
context switch overhead without any associated benefit, and so it is
better to simply ignore the iWMMXt unit on these systems. So rip out the
support. Doing so also fixes the issue reported in [0] related to UNDEF
handling of co-processor #0/#1 instructions issued from user space
running in Thumb2 mode.
The PJ4 cores are used in four platforms: Armada 370/xp, Dove (Cubox,
d2plug), MMP2 (xo-1.75) and Berlin (Google TV). Out of these, only the
first is still widely used, but that one actually doesn't have iWMMXt
but instead has only VFPV3-D16, and so it is not impacted by this
change.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218427 [0]
Fixes: 8bcba70cb5c22 ("ARM: entry: Disregard Thumb undef exception ...")
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Arnd Bergmann
Josua Mayer
Kees Cook
Thomas Bourgoin
Lionel Debieve
Dario Binacchi
Alexander Sverdlin
Masahiro Yamada
Tim Lunn
Andreas Kemnade
Nishanth Menon
Romain Naour
Tony Lindgren
Ard Biesheuvel