IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit b539ea60f5043b9acd7562f04fa2117f18776cbb ]
Null pointer dereference seen when cxgb4vf driver is unloaded
without bringing up any interfaces, moving mac_hlist initialization
to driver probe and free the mac_hlist in remove to fix the issue.
Fixes: 24357e06ba51 ("cxgb4vf: fix memleak in mac_hlist initialization")
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a8d84bf513823ba398f4b2dec41b8decf4041af ]
The locally maintained list for tracking hash mac table was
not freed during driver remove.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dedc73a4658ebcc0c9b58c3cb84e9ac80122213 ]
The Linux BTT implementation assumes that log entries will never have
the 'zero' flag set, and indeed it never sets that flag for log entries
itself.
However, the UEFI spec is ambiguous on the exact format of the LBA field
of a log entry, specifically as to whether it should include the
additional flag bits or not. While a zero bit doesn't make sense in the
context of a log entry, other BTT implementations might still have it set.
If an implementation does happen to have it set, we would happily read
it in as the next block to write to for writes. Since a high bit is set,
it pushes the block number out of the range of an 'arena', and we fail
such a write with an EIO.
Follow the robustness principle, and tolerate such implementations by
stripping out the zero flag when populating the free list during
initialization. Additionally, use the same stripped out entries for
detection of incomplete writes and map restoration that happens at this
stage.
Add a sysfs file 'log_zero_flags' that indicates the ability to accept
such a layout to userspace applications. This enables 'ndctl
check-namespace' to recognize whether the kernel is able to handle zero
flags, or whether it should attempt a fix-up under the --repair option.
Cc: Dan Williams <dan.j.williams@intel.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Reported-by: Pedro d'Aquino Filocre F S Barbuda <pbarbuda@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f8c9011151337d0bc106693f272f9bddbccfab2 ]
We call btt_log_read() twice, once to get the 'old' log entry, and again
to get the 'new' entry. However, we have no use for the 'old' entry, so
remove it.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit af700eaed0564d5d3963a7a51cb0843629d7fe3d upstream.
objtool points out several conditions that it does not like, depending
on the combination with other configuration options and compiler
variants:
stack protector:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled
stackleak plugin:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled
kasan:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled
The stackleak and kasan options just need to be disabled for this file
as we do for other files already. For the stack protector, we already
attempt to disable it, but this fails on clang because the check is
mixed with the gcc specific -fno-conserve-stack option. According to
Andrey Ryabinin, that option is not even needed, dropping it here fixes
the stackprotector issue.
Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/
Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/
Fixes: d08965a27e84 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d08965a27e84ca090b504844d50c24fc98587b11 upstream.
UBSAN can insert extra code in random locations; including AC=1
sections. Typically this code is not safe and needs wrapping.
So far, only __ubsan_handle_type_mismatch* have been observed in AC=1
sections and therefore only those are annotated.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[stable backport: only take the lib/Makefile change to resolve gcc-10
build issues]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8659a0e0efdd975c73355dbc033f79ba3b31e82c ]
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c55d7b5e64265fdca45c85b639013e770bde2d0e ]
I have tested this with the Radix MMU and everything seems to work, and
the previous patch for Hash seems to fix everything too.
STRICT_KERNEL_RWX should still be disabled by default for now.
Please test STRICT_KERNEL_RWX + RELOCATABLE!
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191224064126.183670-2-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ec591e51a4b0aedb6c7f1a8cd722aa58d7f61ba ]
This patch restores the alphabetic order which was broken by
commit 1e0fc9d1eb2b0 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX
for some configs")
Fixes: 1e0fc9d1eb2b0 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3a5fd0dbd87853f8bd2ea275a5b3b41d6686e761 upstream.
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6b39f070722ea9963ffe756bfe94e89218c5e63 upstream.
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7513c5786f8b33f0c107b3759e433bc6cbb2efa upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589776238-23877-1-git-send-email-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0cb099062b0c18246c3a20caaab4c0afc303255 upstream.
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/20200518175728.28766-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f98be6c6359e7e4a61aaefb9964c1db31cb9ec0c upstream.
pppol2tp_connect() initialises L2TP sessions after they've been exposed
to the rest of the system by l2tp_session_register(). This puts
sessions into transient states that are the source of several races, in
particular with session's deletion path.
This patch centralises the initialisation code into
pppol2tp_session_init(), which is called before the registration phase.
The only field that can't be set before session registration is the
pppol2tp socket pointer, which has already been converted to RCU. So
pppol2tp_connect() should now be race-free.
The session's .session_close() callback is now set before registration.
Therefore, it's always called when l2tp_core deletes the session, even
if it was created by pppol2tp_session_create() and hasn't been plugged
to a pppol2tp socket yet. That'd prevent session free because the extra
reference taken by pppol2tp_session_close() wouldn't be dropped by the
socket's ->sk_destruct() callback (pppol2tp_session_destruct()).
We could set .session_close() only while connecting a session to its
pppol2tp socket, or teach pppol2tp_session_close() to avoid grabbing a
reference when the session isn't connected, but that'd require adding
some form of synchronisation to be race free.
Instead of that, we can just let the pppol2tp socket hold a reference
on the session as soon as it starts depending on it (that is, in
pppol2tp_connect()). Then we don't need to utilise
pppol2tp_session_close() to hold a reference at the last moment to
prevent l2tp_core from dropping it.
When releasing the socket, pppol2tp_release() now deletes the session
using the standard l2tp_session_delete() function, instead of merely
removing it from hash tables. l2tp_session_delete() drops the reference
the sessions holds on itself, but also makes sure it doesn't remove a
session twice. So it can safely be called, even if l2tp_core already
tried, or is concurrently trying, to remove the session.
Finally, pppol2tp_session_destruct() drops the reference held by the
socket.
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee40fb2e1eb5bc0ddd3f2f83c6e39a454ef5a741 upstream.
pppol2tp_session_create() registers sessions that can't have their
corresponding socket initialised. This socket has to be created by
userspace, then connected to the session by pppol2tp_connect().
Therefore, we need to protect the pppol2tp socket pointer of L2TP
sessions, so that it can safely be updated when userspace is connecting
or closing the socket. This will eventually allow pppol2tp_connect()
to avoid generating transient states while initialising its parts of the
session.
To this end, this patch protects the pppol2tp socket pointer using RCU.
The pppol2tp socket pointer is still set in pppol2tp_connect(), but
only once we know the function isn't going to fail. It's eventually
reset by pppol2tp_release(), which now has to wait for a grace period
to elapse before it can drop the last reference on the socket. This
ensures that pppol2tp_session_get_sock() can safely grab a reference
on the socket, even after ps->sk is reset to NULL but before this
operation actually gets visible from pppol2tp_session_get_sock().
The rest is standard RCU conversion: pppol2tp_recv(), which already
runs in atomic context, is simply enclosed by rcu_read_lock() and
rcu_read_unlock(), while other functions are converted to use
pppol2tp_session_get_sock() followed by sock_put().
pppol2tp_session_setsockopt() is a special case. It used to retrieve
the pppol2tp socket from the L2TP session, which itself was retrieved
from the pppol2tp socket. Therefore we can just avoid dereferencing
ps->sk and directly use the original socket pointer instead.
With all users of ps->sk now handling NULL and concurrent updates, the
L2TP ->ref() and ->deref() callbacks aren't needed anymore. Therefore,
rather than converting pppol2tp_session_sock_hold() and
pppol2tp_session_sock_put(), we can just drop them.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee28de6bbd78c2e18111a0aef43ea746f28d2073 upstream.
Sessions must be initialised before being made externally visible by
l2tp_session_register(). Otherwise the session may be concurrently
deleted before being initialised, which can confuse the deletion path
and eventually lead to kernel oops.
Therefore, we need to move l2tp_session_register() down in
l2tp_eth_create(), but also handle the intermediate step where only the
session or the netdevice has been registered.
We can't just call l2tp_session_register() in ->ndo_init() because
we'd have no way to properly undo this operation in ->ndo_uninit().
Instead, let's register the session and the netdevice in two different
steps and protect the session's device pointer with RCU.
And now that we allow the session's .dev field to be NULL, we don't
need to prevent the netdevice from being removed anymore. So we can
drop the dev_hold() and dev_put() calls in l2tp_eth_create() and
l2tp_eth_dev_uninit().
Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3953ae7b218df4d1e544b98a393666f9ae58a78c upstream.
Sessions created by l2tp_session_create() aren't fully initialised:
some pseudo-wire specific operations need to be done before making the
session usable. Therefore the PPP and Ethernet pseudo-wires continue
working on the returned l2tp session while it's already been exposed to
the rest of the system.
This can lead to various issues. In particular, the session may enter
the deletion process before having been fully initialised, which will
confuse the session removal code.
This patch moves session registration out of l2tp_session_create(), so
that callers can control when the session is exposed to the rest of the
system. This is done by the new l2tp_session_register() function.
Only pppol2tp_session_create() can be easily converted to avoid
modifying its session after registration (the debug message is dropped
in order to avoid the need for holding a reference on the session).
For pppol2tp_connect() and l2tp_eth_create()), more work is needed.
That'll be done in followup patches. For now, let's just register the
session right after its creation, like it was done before. The only
difference is that we can easily take a reference on the session before
registering it, so, at least, we're sure it's not going to be freed
while we're working on it.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d51c214541c5154dda3037289ee895ea3ded5ebd upstream.
The second argument is the end "pointer", not the length.
Fixes: d28f6df1305a ("arm64/kexec: Add core kexec support")
Cc: <stable@vger.kernel.org> # 4.8.x-
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 065cf577135a4977931c7a1e1edf442bfd9773dd ]
With the removal of the padata timer, padata_do_serial no longer
needs special CPU handling, so remove it.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec9c7d19336ee98ecba8de80128aa405c45feebb ]
Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from
cryptodev-2.6.git in an 8-CPU kvm guest...
# modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
# modprobe tcrypt mode=215
...caused the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip>
Workqueue: pencrypt padata_parallel_worker
RIP: 0010:padata_reorder+0xcb/0x180
...
Call Trace:
padata_do_serial+0x57/0x60
pcrypt_aead_enc+0x3a/0x50 [pcrypt]
padata_parallel_worker+0x9b/0xe0
process_one_work+0x1b5/0x3f0
worker_thread+0x4a/0x3c0
...
In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask
instead of the effective cpumask, and in this case cpumask_first picked
an offline CPU.
The offline CPU's reorder->list.next is NULL in padata_reorder because
the list wasn't initialized in padata_init_pqueues, which only operates
on CPUs in the effective mask.
Fix by using the effective mask in padata_alloc_pd.
Fixes: 6fc4dbcf0276 ("padata: Replace delayed timer with immediate workqueue in padata_reorder")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc4dbcf0276279d488c5fbbfabe94734134f4fa ]
The function padata_reorder will use a timer when it cannot progress
while completed jobs are outstanding (pd->reorder_objects > 0). This
is suboptimal as if we do end up using the timer then it would have
introduced a gratuitous delay of one second.
In fact we can easily distinguish between whether completed jobs
are outstanding and whether we can make progress. All we have to
do is look at the next pqueue list.
This patch does that by replacing pd->processed with pd->cpu so
that the next pqueue is more accessible.
A work queue is used instead of the original try_again to avoid
hogging the CPU.
Note that we don't bother removing the work queue in
padata_flush_queues because the whole premise is broken. You
cannot flush async crypto requests so it makes no sense to even
try. A subsequent patch will fix it by replacing it with a ref
counting scheme.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[dj: - adjust context
- corrected setup_timer -> timer_setup to delete hunk
- skip padata_flush_queues() hunk, function already removed
in 4.14]
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd845bcb41d5b7f83745e0cb99273eb376f2ec5 ]
The parallel queue per-cpu data structure gets initialized only for CPUs
in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer
may run on a different CPU and might wrongly decide it's the target CPU
for the next reorder item as per-cpu memory gets memset(0) and we might
be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0.
Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index'
compare in padata_get_next() fail in this case by initializing the
cpu_index member of all per-cpu parallel queues. Use -1 for unused ones.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8101b5a1531f3390b3a69fa7934c70a8fd6566ad ]
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd12da7f50b8bc191fcb3bab1f55c582234df59 ]
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac854131d9844f79e2fdcef67a7707227538d78a ]
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8e28ff3106b093d98bfd2eceb9b430c70a8758 ]
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 846c68f7f1ac82c797a2f1db3344a2966c0fe2e1 ]
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI
flag since it returns multipart message.
This patch adds a new arg "flags" in gtp_genl_fill_info() so that
flags can be set by the callers.
Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c84cb3735fd53c91101ccdb191f2e3331a9262cb ]
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7706b0a76a9697021e2bf395f3f065c18f51043d ]
If a component fails to bind due to -EPROBE_DEFER we should not log an
error as this is not a real failure.
Fixes messages like:
vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517
vc4-drm soc:gpu: master bind failed: -517
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200411190241.89404-1-james.hilliard1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 107bc0766b9feb5113074c753735a3f115c2141f ]
We want to deliver packets to monitoring devices before it is
put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aebfffacfa379ba400da573a5bf9e49634e38cb ]
configfs_rmdir() invokes configfs_get_config_item(), which returns a
reference of the specified config_item object to "parent_item" with
increased refcnt.
When configfs_rmdir() returns, local variable "parent_item" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
configfs_rmdir(). When down_write_killable() fails, the function forgets
to decrease the refcnt increased by configfs_get_config_item(), causing
a refcnt leak.
Fix this issue by calling config_item_put() when down_write_killable()
fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45a76264c26fd8cfd0c9746196892d9b7e2657ee ]
In NPIV environment, a NPIV host may use a queue pair created by base host
or other NPIVs, so the check for a queue pair created by this NPIV is not
correct, and can cause an abort to fail, which in turn means the NVME
command not returned. This leads to hang in nvme_fc layer in
nvme_fc_delete_association() which waits for all I/Os to be returned, which
is seen as hang in the application.
Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7527373fe28f97d8a196ab562db5589be0d34b9 ]
Remove "params.h" include, which has been dropped in GCC 10.
Remove is_a_helper() macro, which is now defined in gimple.h, as seen
when running './scripts/gcc-plugin.sh g++ g++ gcc':
In file included from <stdin>:1:
./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’
852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./gcc-plugins/gcc-common.h:125,
from <stdin>:1:
/usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here
1037 | is_a_helper <const ggoto *>::test (const gimple *gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid
meaningless warnings from error() formats used by plugins:
scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’:
scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag]
253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org>
Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org
[kees: include -Wno-format-diag for plugin builds]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e7572cffe442290c347e779bf8bd4306bb0aa7c ]
3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions")
showed that we don't use seq_file correctly.
So make sure that our ->next function always updates the position.
Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9d1a0a41d4486955e96552293c1fcf1fce61602 ]
A call to 'i2c_demux_deactivate_master()' is missing in the error handling
path, as already done in the remove function.
Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e461b8c991b9202b007ea2059d953e264240b0c9 ]
IVRS parsing code always tries to read 255 bytes from memory when
retrieving ACPI device path, and makes an assumption that firmware
provides a zero-terminated string. Both of those are bugs: the entry
is likely to be shorter than 255 bytes, and zero-termination is not
guaranteed.
With Acer SF314-42 firmware these issues manifest visibly in dmesg:
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1...
The first three lines show how the code over-reads adjacent table
entries into the UID, and in the last line it even reads garbage data
beyond the end of the IVRS table itself.
Since each entry has the length of the UID (uidl member of ivhd_entry
struct), use that for memcpy, and manually add a zero terminator.
Avoid zero-filling hid and uid arrays up front, and instead ensure
the uid array is always zero-terminated. No change needed for the hid
array, as it was already properly zero-terminated.
Fixes: 2a0cb4e2d423c ("iommu/amd: Add new map for storing IVHD dev entry type HID")
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20200511102352.1831-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e89b7210403fa4a8acafe7c602b6212b7af6c3b ]
cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.
Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e3a34e9f409ebe83d1af7cd2f49fca7af97dfac ]
This patch fixes the return value of ima_write_policy() when a new policy
is directly passed to IMA and the current policy requires appraisal of the
file containing the policy. Currently, if appraisal is not in ENFORCE mode,
ima_write_policy() returns 0 and leads user space applications to an
endless loop. Fix this issue by denying the operation regardless of the
appraisal mode.
Cc: stable@vger.kernel.org # 4.10.x
Fixes: 19f8a84713edc ("ima: measure and appraise the IMA policy itself")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53de3b080d5eae31d0de219617155dcc34e7d698 ]
This patch avoids a kernel panic due to accessing an error pointer set by
crypto_alloc_shash(). It occurs especially when there are many files that
require an unsupported algorithm, as it would increase the likelihood of
the following race condition:
Task A: *tfm = crypto_alloc_shash() <= error pointer
Task B: if (*tfm == NULL) <= *tfm is not NULL, use it
Task B: rc = crypto_shash_init(desc) <= panic
Task A: *tfm = NULL
This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new
crypto context must be created.
Cc: stable@vger.kernel.org
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0014cc04e8ec077dc482f00c87dfd949cfe2b98f ]
Commit a408e4a86b36 ("ima: open a new file instance if no read
permissions") tries to create a new file descriptor to calculate a file
digest if the file has not been opened with O_RDONLY flag. However, if a
new file descriptor cannot be obtained, it sets the FMODE_READ flag to
file->f_flags instead of file->f_mode.
This patch fixes this issue by replacing f_flags with f_mode as it was
before that commit.
Cc: stable@vger.kernel.org # 4.20.x
Fixes: a408e4a86b36 ("ima: open a new file instance if no read permissions")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 350ef88e7e922354f82a931897ad4a4ce6c686ff upstream.
If the algorithm we're parallelizing is asynchronous we might change
CPUs between padata_do_parallel() and padata_do_serial(). However, we
don't expect this to happen as we need to enqueue the padata object into
the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel
queue.
Ensure we're not switching CPUs for a given padata object by tracking
the CPU within the padata object. If the serial callback gets called on
the wrong CPU, defer invoking padata_reorder() via a kernel worker on
the CPU we're expected to run on.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf5868c8a22dc2854b96e9569064bb92365549ca upstream.
The reorder timer function runs on the CPU where the timer interrupt was
handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask
set.
Ensure the padata_reorder() callback runs on the correct CPU, which is
one in the 'pcpu' CPU mask set and, preferrably, the next expected one.
Do so by comparing the current CPU with the expected target CPU. If they
match, call padata_reorder() right away. If they differ, schedule a work
item on the target CPU that does the padata_reorder() call for us.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1413ef638abae4ab5621901cf4d8ef08a4a48ba6 upstream.
The struct cdev is embedded in the struct i2c_dev. In the current code,
we would free the i2c_dev struct directly in put_i2c_dev(), but the
cdev is manged by a kobject, and the release of it is not predictable.
So it is very possible that the i2c_dev is freed before the cdev is
entirely released. We can easily get the following call trace with
CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0
Modules linked in:
CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 80c00089 (Nzcv daIf +PAN +UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp : ffff00001292f7d0
x29: ffff00001292f7d0 x28: ffff800b82151788
x27: 0000000000000001 x26: ffff800b892c0000
x25: ffff0000124a2558 x24: 0000000000000000
x23: ffff00001107a1d8 x22: ffff0000116b5088
x21: ffff800bdc6afca8 x20: ffff000012471ae8
x19: ffff00001168f2c8 x18: 0000000000000010
x17: 00000000fd6f304b x16: 00000000ee79de43
x15: ffff800bc0e80568 x14: 79616c6564203a74
x13: 6e6968207473696c x12: 5f72656d6974203a
x11: ffff0000113f0018 x10: 0000000000000000
x9 : 000000000000001f x8 : 0000000000000000
x7 : ffff0000101294cc x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 00000000ffffffff x2 : 0000000000000000
x1 : 387fc15c8ec0f200 x0 : 0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
__debug_check_no_obj_freed+0x19c/0x228
debug_check_no_obj_freed+0x1c/0x28
kfree+0x250/0x440
put_i2c_dev+0x68/0x78
i2cdev_detach_adapter+0x60/0xc8
i2cdev_notifier_call+0x3c/0x70
notifier_call_chain+0x8c/0xe8
blocking_notifier_call_chain+0x64/0x88
device_del+0x74/0x380
device_unregister+0x54/0x78
i2c_del_adapter+0x278/0x2d0
unittest_i2c_bus_remove+0x3c/0x80
platform_drv_remove+0x30/0x50
device_release_driver_internal+0xf4/0x1c0
driver_detach+0x58/0xa0
bus_remove_driver+0x84/0xd8
driver_unregister+0x34/0x60
platform_driver_unregister+0x20/0x30
of_unittest_overlay+0x8d4/0xbe0
of_unittest+0xae8/0xb3c
do_one_initcall+0xac/0x450
do_initcall_level+0x208/0x224
kernel_init_freeable+0x2d8/0x36c
kernel_init+0x18/0x108
ret_from_fork+0x10/0x1c
irq event stamp: 3934661
hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58
hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0
softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628
softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the i2c_dev,
and use the API provided by the commit 233ed09d7fda to make sure that
the release of i2c_dev and cdev are in sequence.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72139dfa2464e43957d330266994740bb7be2535 upstream.
The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 00400009 (nzcv daif +PAN -UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp : ffff80001cbcfc70
x29: ffff80001cbcfc70 x28: ffff800010ea2128
x27: ffff800010bad000 x26: 0000000000000000
x25: ffff80001103c640 x24: ffff80001107b268
x23: ffff800010bad9e8 x22: ffff800010ea2128
x21: ffff000bc2c62af8 x20: ffff80001103c600
x19: ffff800010e867d8 x18: 0000000000000060
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000bd7240470 x14: 6e6968207473696c
x13: 5f72656d6974203a x12: 6570797420746365
x11: 6a626f2029302065 x10: 7461747320657669
x9 : 7463612820657669 x8 : 3378302f3078302b
x7 : 0000000000001d7a x6 : ffff800010fd5889
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff000bff948548
x1 : 276a1c9e1edc2300 x0 : 0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
debug_check_no_obj_freed+0x1e8/0x210
kfree+0x1b8/0x368
watchdog_cdev_unregister+0x88/0xc8
watchdog_dev_unregister+0x38/0x48
watchdog_unregister_device+0xa8/0x100
softdog_exit+0x18/0xfec4 [softdog]
__arm64_sys_delete_module+0x174/0x200
el0_svc_handler+0xd0/0x1c8
el0_svc+0x8/0xc
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit 233ed09d7fda
to make sure that the release of watchdog_core_data and cdev are
in sequence.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
[bwh: Backported to 4.14:
- There's no reboot notifier here
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream.
gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.
The flag change happened at https://gcc.gnu.org/PR92046.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
