IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b03155 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
If bind fails, we can call msm_drm_uninit before kms elements have been
created. In this case, drm_atomic_helper_shutdown will fail since there
are no drm objects. Only call drm unregistration and shutdown if drm is
registered.
Also while we're in here move the workqueue destruction to below
component_unbind since components could be actively using the wq during
uninit or in their unbind routine.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524202919.179289-1-sean@poorly.run
Now that the panel probe/setup is in the modeset path, we can call
dsi_manager_setup_encoder() in a common place for both internal and
external bridge setups.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-10-sean@poorly.run
Since deferred probe from the modeset init path now works, we can move
the panel initialization from detect() into connector init. This
avoids doing work in detect() and hopefully will result in a more
deterministic boot sequence between devices with a dsi panel, and those
with an external bridge.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-9-sean@poorly.run
It's a bit dangerous to store the flags in msm_dsi since there's no way to
tell when they're populated. Fortunately the only place that uses them
is the same place that fills them. So just use a local variable and
delete the struct member.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-5-sean@poorly.run
add_display_components() calls of_platform_populate, and we depopluate
on pdev remove, but not when probe fails. So if we get a probe deferral
in one of the components, we won't depopulate the platform. This causes
the core to keep references to devices which should be destroyed, which
causes issues when those same devices try to re-initialize on the next
probe attempt.
I think this is the reason we had issues with the gmu's device-managed
resources on deferral (worked around in commit 94e3a17f33a5).
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.run
The 10nm pll driver didn't have any failure-path cleanup in register,
and the destroy function didn't unregister any of the hardware. This
patch adds both.
The reason things haven't been blowing up horribly is that msm_drv has a
reference count issue that keeps devices alive, so the destroy function
was never called. That will be fixed in a follow-up patch.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-1-sean@poorly.run
Fix the error paths in _dpu_kms_mmu_init() to properly
clean up the iommu domain and not call _dpu_kms_mmu_destroy() when
things are only partially setup.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617200405.131843-2-sean@poorly.run
The interconnect API provides an interface for consumer drivers to
express their bandwidth needs in the SoC. This data is aggregated
and the on-chip interconnect hardware is configured to the most
appropriate power/performance profile.
Use the API to configure the interconnects and request bandwidth
between DDR and the display hardware (MDP port(s) and rotator
downscaler).
v2: update the path names to be consistent with dpu, handle the NULL
path case, updated commit msg from Georgi.
v3: split out icc setup into it's own function, and rework logic
slightly so no interconnect paths is not fatal.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-By: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
dpu_mdss_destroy() can get called not just from
msm_drm_uninit() but also from msm_drm_bind() in case
of any failures.
dpu_mdss_destroy() removes the icc voting by calling
icc_put. This could accidentally remove the voting
done by pm_runtime_enable.
To make the voting balanced add a minimum vote in
dpu_mdss_init() to avoid any unclocked access.
This change depends on the following patch which
introduces interconnect binding to MDSS driver:
https://patchwork.codeaurora.org/patch/708155/
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add interconnect properties such as interconnect provider specifier
, the edge source and destination ports which are required by the
interconnect API to configure interconnect path for MDSS.
Changes in v2:
- None
Changes in v3:
- Remove common property definitions (Rob Herring)
Changes in v4:
- Use port macros and change port string names (Georgi Djakov)
Changes in v5-v7:
- None
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Changes in v7:
- Fixed a typo
Changes in v8:
- Handle the of_icc_get() returning NULL case. In practice
icc_set_bw() will gracefully handle the case of a NULL path,
but it's probably best for clarity to keep num_paths=0 in
this case.
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.
Changes in v2:
- Fixed build error due to partial clean up
Changes in v3:
- Condense multiple lines into a single line (Sean Paul)
Changes in v4-v7:
- None
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Clang warns:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: warning: logical not is
only applied to the left hand side of this bitwise operator
[-Wlogical-not-parentheses]
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^ ~
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
after the '!' to evaluate the bitwise operator first
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^
( )
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
around left hand side expression to silence this warning
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^
( )
1 warning generated.
Add parentheses around the bitwise AND so it is evaluated first then
negated.
Fixes: 3dbbf8f09e83 ("drm/msm/dsi: Add old timings quirk for 10nm phy")
Link: https://github.com/ClangBuiltLinux/linux/issues/547
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The A540 is a derivative of the A530, and is found in the MSM8998 SoC.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
put_iova() would attempt to dereference a NULL pointer via the
address space pointer when no IOMMU is present. Correct this by adding
the appropriate check.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When panel probe happens after DSI probe, the DSI probe is deferred as
per current design. In the probe defer path dsi device is destroyed.
This NULL dsi device could be deferenced by the panel probe in the
mipi_dsi_attach path.
Check for NULL dsi device before accessing it.
Changes in v2:
- Add more comments on how this NULL pointer situation will be hit
Reported-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before loading the zap shader we should ensure that the reserved memory
region is big enough to hold the loaded file.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DSI controller on the MSM8998 SoC is a 6G v2.0.0 controller which is
very similar to the v2.0.1 of SDM845.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The v3.0.0 10nm phy has two different implementations between MSM8998 and
SDM845, which require different timings calculations. Unfortunately, the
hardware designers did not choose to revise the version to account for this
delta so implement a quirk instead.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The MSM8998 dsi phy is 10nm v3.0.0 like SDM845, however there appear to
be minor differences such as the address space location.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DSI phy on MSM8998 is a 10nm design like SDM845, however it has some
slightly different quirks which need to be handled by drivers. Provide
a separate compatible to assist in handling the specifics.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs. This is because the caller of init expects error
pointers, but init returns NULL on error. Fix this by returning the
expected values on error.
Fixes: 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module)
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GPU specific pm_suspend code assumes that the hardware is active
when the function is called, which it usually is when called as part
of pm_runtime. But during unbind, the pm_suspend functions are called
blindly resulting in a bit of a when the hardware wasn't already
active (or booted, in the case of the GMU).
Instead of calling the pm_suspend function directly, use
pm_runtime_force_suspend() which should check the correct state of
runtime and call the functions on our behalf or skip them if they are
not needed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the failure path for dpu_kms_init() it is possible to get to the MMU
destroy function with uninitialized MMU structs. Check for NULL and skip
if needed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If enabling clocks fails in msm_dss_enable_clk() the code to unwind the
settings starts at 'i' which is the clock that just failed. While this
isn't harmful it does result in a number of warnings from the clock
subsystem while trying to unpreare/disable the very clock that had
just failed to prepare/enable. Skip the current failed clock during
the unwind to to avoid the extra log spew.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pass the index of the MMU domain in struct msm_file_private instead
of assuming gpu->id throughout the submit path. This clears the way
to change ctx->aspace to a per-instance pagetable.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When we move to 64 bit addressing for a5xx and a6xx targets we will start
seeing pagefaults at larger addresses so format them appropriately in the
log message for easier debugging.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
A5XX and newer GPUs can be run in either 32 or 64 bit mode. The GPU
registers and the microcode use 64 bit virtual addressing in either
case but the upper 32 bits are ignored if the GPU is in 32 bit mode.
There is no performance disadvantage to remaining in 64 bit mode even
if we are only generating 32 bit addresses so switch over now to prepare
for using addresses above 4G on targets that support them.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[small fixup for unused variable warning]
Signed-off-by: Rob Clark <robdclark@chromium.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
wait_for_completion_timeout() returns 0 on timeout and aleast 1 otherwise
so checking for < makes no sense here.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of reaching into dev->primary for debugfs_root, use the minor
passed into debugfs_init.
This avoids creating the debug directory under /sys/kernel/debug/ and
instead creates the directory under the correct node in
/sys/kernel/debug/dri/<node>/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173231.5040-1-sean@poorly.run
This rename makes it more clear that everything initialized in the _init
function must be cleaned up in a6xx_gmu_remove. This will hopefully
dissuade people from using device managed resources (for reasons laid
out in the previous patch).
Changes in v2:
- None
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-6-sean@poorly.run
of_find_device_by_node() grabs a dev reference, so make sure we clear it
on error and remove.
Changes in v2:
- Added to the set (Jordan)
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-5-sean@poorly.run
The gmu driver is initialized and cleaned up with calls from the gpu driver. As
such, the platform device stays valid after a6xx_gmu_remove is called and the
device managed resources are not freed. In the case of gpu probe failures or
unbind, these resources will remain managed.
If the gpu bind is run again (eg: if there's a probe defer somewhere in msm),
these resources will be initialized again for the same device, creating multiple
references. In the case of irqs, this causes failures since the irqs are
not shared (nor should they be).
This patch removes all devm_* calls and manually cleans things up in
gmu_remove.
Changes in v2:
- Add iounmap and free_irq to gmu_probe error paths
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-4-sean@poorly.run
pdcptr and seqptr aren't necessarily valid, check them before trying to
unmap them.
Changes in v2:
- None
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-3-sean@poorly.run
a6xx_gmu_stop() already calls this function via shutdown or force_stop,
so it's not necessary to call it twice. Previously this would have
knocked the irq refcount out of sync, but now with the irqs_enabled flag
it's just housekeeping.
Changes in v2:
- None
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-2-sean@poorly.run
The driver checks for gmu->mmio as a sign that the device has been
initialized, however there are failures in probe below the mmio init.
If one of those is hit, mmio will be non-null but freed.
In that case, a6xx_gmu_probe will return an error to a6xx_gpu_init which
will in turn call a6xx_gmu_remove which checks gmu->mmio and tries to free
resources for a second time. This causes a great boom.
Fix this by adding an initialized member to gmu which is set on
successful probe and cleared on removal.
Changes in v2:
- None
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-1-sean@poorly.run
