Commit Graph

1104783 Commits

Author SHA1 Message Date
Peter Wang
f53f191357 scsi: ufs: ufs-mediatek: Add stage information for ref-clk control
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to
precisely configure the low-power state of the parent of ref-clk.

Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Peter Wang
2bae03a6ac scsi: ufs: ufs-mediatek: Prevent host hang by setting CLK_CG early
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host
hang issue by setting CLK_CG bit before host is enabled.

This operation shall have no side effect on those platforms which do not
support this bit.

Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Peter Wang
981b4ac04c scsi: ufs: ufs-mediatek: Always add delays for VCC operations
MediaTek decides to always add delays before and after VCC is turned-off.

Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:35 -04:00
Stanley Chu
e7bf1d5006 scsi: ufs: ufs-mediatek: Fix build warnings
Fix build warnings:

1.
../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes]
int ufs_mtk_system_suspend(struct device *dev)
    ^
../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int ufs_mtk_system_suspend(struct device *dev)
^
static

2.
../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat]
                snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver);
                                                         ~~~   ^~~
                                                         %d

Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:35 -04:00
Arnd Bergmann
b04e75a4a8 scsi: dpt_i2o: Remove obsolete driver
The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.

The i2o driver layer was removed in 2015 with commit 4a72a7af46
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.

The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.

Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org
Cc: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:56:21 -04:00
Arnd Bergmann
9f7c2232e1 scsi: BusLogic: Remove bus_to_virt()
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.

Before commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.

This was in turn fixed in commit 56f396146a ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.

Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.

Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.

Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:52:05 -04:00
Colin Ian King
07f0c8aff5 scsi: fcoe: Remove redundant assignment to variable 'wlen'
Variable wlen is being assigned a value that is never read, it is being
re-assigned with a different value later on. The assignment is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/scsi/fcoe/fcoe.c:1491:2: warning: Value stored to 'wlen'
is never read [deadcode.DeadStores]

Link: https://lore.kernel.org/r/20220623164710.76831-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:45:25 -04:00
Krzysztof Kozlowski
35d11ec239 scsi: ufs: ufshcd: Constify pointed data
For code safety, constify arrays and pointers to data which is not
modified.

Link: https://lore.kernel.org/r/20220623102432.108059-4-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:26:45 -04:00
Krzysztof Kozlowski
a48aac5dfc scsi: ufs: ufshcd-pltfrm: Constify pointed data
For code safety, constify pointers to data which is not modified.

Link: https://lore.kernel.org/r/20220623102432.108059-3-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:26:45 -04:00
Varun Prakash
e34cc16a80 scsi: MAINTAINERS: Update cxgb3i and cxgb4i maintainer
Link: https://lore.kernel.org/r/20220612121340.6746-1-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:54:02 -04:00
Tetsuo Handa
90c3ca3f24 scsi: mpt3sas: Remove flush_scheduled_work() call
It seems to me that mpt3sas driver is using dedicated workqueues and is not
calling schedule{,_delayed}_work{,_on}(). Then, there will be no work to
flush using flush_scheduled_work().

Link: https://lore.kernel.org/r/f3b97c7c-1094-4e46-20d8-4321716d6f3f@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:52:44 -04:00
Changyuan Lyu
cc06af0bbc scsi: trace: Print driver_tag and scheduler_tag in SCSI trace
Trace events like scsi_dispatch_cmd_start and scsi_dispatch_cmd_done are
useful for tracking a command throughout its lifetime. But for some ATA
passthrough commands, the information printed in current logs is not enough
to identify and match them. For example, if two threads send SMART cmd to
the same disk at the same time, their trace logs may look the same, which
makes it hard to match scsi_dispatch_cmd_done and scsi_dispatch_cmd_start.

Printing tags can help us solve the problem.  Further, if a command failed
for some reason and then is retried, its driver_tag will change. So
scheduler_tag is also included such that we can track the retries of a
command.

Link: https://lore.kernel.org/r/20220621181125.3211399-1-changyuanl@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Reviewed-by: Jolly Shah <jollys@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:43:23 -04:00
Jiang Jian
bc98b503b1 scsi: sym53c8xx_2: Remove redundant "with"
Remove redundant "with" in comment

Link: https://lore.kernel.org/r/20220621162631.25353-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:41:19 -04:00
Jiang Jian
e448c8508d scsi: snic: Remove redundant "on"
Remove redundant "on" in comment.

Link: https://lore.kernel.org/r/20220621150136.9264-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:40:11 -04:00
Wolfram Sang
82ede9c198 scsi: ufs: core: Fix typos in error messages
Should be "retries" instead of "retires".

Link: https://lore.kernel.org/r/20220621144653.62630-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:40:11 -04:00
Jiang Jian
ebd676ff3b scsi: aacraid: Remove redundant "the"
Remove redundant "the" in comment.

Link: https://lore.kernel.org/r/20220621142346.6429-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:39:55 -04:00
Jiang Jian
b73b14300e scsi: target: Remove duplicate "the"
Remove redundant "the" in comment".

Link: https://lore.kernel.org/r/20220621142012.4622-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:36:06 -04:00
Jiang Jian
950d2867c1 scsi: message: fusion: Drop redundant "the"
Redundant "the" in the comments can be dropped.

Link: https://lore.kernel.org/r/20220621103119.91492-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:34:52 -04:00
Jiang Jian
e1397bc6ad scsi: hisi_sas: Align comments
Properly align comment lines in slot_index_alloc_quirk_v2_hw().

Link: https://lore.kernel.org/r/20220621072405.34394-1-jiangjian@cdjrlc.com
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:33:19 -04:00
Zhang Jiaming
efef34cb45 scsi: mpt3sas: Fix whitespace and spelling mistake
There is a spelling mistake in _base_sas_ioc_info(). Change 'cant' to
'can't'.

Also fix up whitespace.

Link: https://lore.kernel.org/r/20220617101103.3162-1-jiaming@nfschina.com
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:31:44 -04:00
Ren Yu
13d2d34287 scsi: mpt3sas: Fix typo in comment
Spelling mistake in comment: non-succesfull -> non-successful.

Link: https://lore.kernel.org/r/20220617081557.9009-1-renyu@nfschina.com
Signed-off-by: Ren Yu <renyu@nfschina.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:29:35 -04:00
Bo Liu
873cdda193 scsi: core: bsg: Remove usage of the deprecated ida_simple_xxx() API
Use ida_alloc_xxx()/ida_free() instead of
ida_simple_get()/ida_simple_remove().

The latter is deprecated and more verbose.

Link: https://lore.kernel.org/r/20220617020430.2300-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:22:51 -04:00
Mike Christie
6e637b723d scsi: libiscsi: Improve conn_send_pdu API
The conn_send_pdu API is evil in that it returns a pointer to an
iscsi_task, but that task might have been freed already so you can't touch
it. This patch splits the task allocation and transmission, so functions
like iscsi_send_nopout() can access the task before its sent and do
whatever bookkeeping is needed before it is sent.

Link: https://lore.kernel.org/r/20220616224557.115234-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
6d626150d6 scsi: iscsi: Try to avoid taking back_lock in xmit path
We need the back lock when freeing a task, so we hold it when calling
__iscsi_put_task() from the completion path to make it easier and to avoid
having to retake it in that path. For iscsi_put_task() we just grabbed it
while also doing the decrement on the refcount but it's only really needed
if the refcount is zero and we free the task. This modifies
iscsi_put_task() to just take the lock when needed then has the xmit path
use it. Normally we will then not take the back lock from the xmit path. It
will only be rare cases where the network is so fast that we get a response
right after we send the header/data.

Link: https://lore.kernel.org/r/20220616224557.115234-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
e1c6a7ec14 scsi: iscsi: Remove iscsi_get_task back_lock requirement
We currently require that the back_lock is held when calling the functions
that manipulate the iscsi_task refcount. The only reason for this is to
handle races where we are handling SCSI-ml EH callbacks and the cmd is
completing at the same time the normal completion path is running, and we
can't return from the EH callback until the driver has stopped accessing
the cmd. Holding the back_lock while also accessing the task->state made it
simple to check that a cmd is completing and also get/put a refcount at the
same time, and at the time we were not as concerned about performance.

The problem is that we don't want to take the back_lock from the xmit path
for normal I/O since it causes contention with the completion path if the
user has chosen to try and split those paths on different CPUs (in this
case abusing the CPUs and ignoring caching improves perf for some uses).

Begins to remove the back_lock requirement for iscsi_get/put_task by
removing the requirement for the get path. Instead of always holding the
back_lock we detect if something has done the last put and is about to call
iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the
last put on a task and only grab the back_lock if the refcount is now zero
and it's going to call iscsi_free_task().

Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
533ac412fd scsi: iscsi: Remove unneeded task state check
Commit 5923d64b7a ("scsi: libiscsi: Drop taskqueuelock") added an extra
task->state because for commit 6f8830f5bb ("scsi: libiscsi: add lock
around task lists to fix list corruption regression") we didn't know why we
ended up with cmds on the list and thought it might have been a bad target
sending a response while we were still sending the cmd. We were never able
to get a target to send us a response early, because it turns out the bug
was just a race in libiscsi/libiscsi_tcp where:

 1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue.

 2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a
    r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it.

 3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the
    requeue list.

 4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk
    of data, so the cmd is done.

 5. target sends the response.

 6. On a different CPU from #3, iscsi_complete_task() processes the
    response.  Since there was no common lock for the list, the lists/tasks
    pointers are not fully in sync, so could end up with list corruption.

Since it was just a race on our side, remove the extra check and fix up the
comments.

Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com
Reviewed-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
9b89153680 scsi: iscsi_tcp: Drop target_alloc use
For software iSCSI, we do a session per host so there is no need to set the
target's can_queue since it's the same as the host one. Setting it just
results in extra atomic checks in the main I/O path.

Link: https://lore.kernel.org/r/20220616224557.115234-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
f93a722fa7 scsi: iscsi_tcp: Tell net when there's more data
If we have more data, set the MSG_SENDPAGE_NOTLAST in case we go down the
sendpage path.

Link: https://lore.kernel.org/r/20220616224557.115234-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
f1d269765e scsi: iscsi: Run recv path from workqueue
We don't always want to run the recv path from the network softirq because
when we have to have multiple sessions sharing the same CPUs, some sessions
can eat up the NAPI softirq budget and affect other sessions or users.

Allow us to queue the recv handling to the iscsi workqueue so we can have
the scheduler/wq code try to balance the work and CPU use across all
sessions' worker threads.

Note: It wasn't the original intent of the change but a nice side effect is
that for some workloads/configs we get a nice performance boost. For a
simple read heavy test:

  fio --direct=1 --filename=/dev/dm-0  --rw=randread --bs=256K
    --ioengine=libaio --iodepth=128 --numjobs=4

where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32%
throughput boost. We also see increases for small I/O IOPs tests but it's
not as high.

Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
8af809966c scsi: iscsi: Add recv workqueue helpers
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.

Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
4b9f8ce4d5 scsi: iscsi: Rename iscsi_conn_queue_work()
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.

Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
31500e9027 scsi: iscsi: Fix session removal on shutdown
When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.

This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.

This fixes a regression added in qedi boot with commit d1f2ce7763 ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.

Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce7763 ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
7bf01eb0d4 scsi: qedi: Use QEDI_MODE_NORMAL for error handling
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There
is currently no difference in behavior between NORMAL and SHUTDOWN, but in
a subsequent commit we will want to know when we are called from the
pci_driver shutdown callout vs remove/err_handler so we know when userspace
is up.

Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
bb42856bfd scsi: iscsi: Add helper to remove a session from the kernel
During qedi shutdown we need to stop the iSCSI layer from sending new nops
as pings and from responding to target ones and make sure there is no
running connection cleanups. Commit d1f2ce7763 ("scsi: qedi: Fix host
removal with running sessions") converted the driver to use the libicsi
helper to drive session removal, so the above issues could be handled. The
problem is that during system shutdown iscsid will not be running so when
we try to remove the root session we will hang waiting for userspace to
reply.

Add a helper that will drive the destruction of sessions like these during
system shutdown.

Link: https://lore.kernel.org/r/20220616222738.5722-5-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
da2f132d00 scsi: iscsi: Clean up bound endpoints during shutdown
In the next patch we allow drivers to drive session removal during
shutdown. In this case iscsid will not be running, so we need to detect
bound endpoints and disconnect them. This moves the bound ep check so we
now always check.

Link: https://lore.kernel.org/r/20220616222738.5722-4-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Mike Christie
3328333b47 scsi: iscsi: Allow iscsi_if_stop_conn() to be called from kernel
iscsi_if_stop_conn() is only called from the userspace interface but in a
subsequent commit we will want to call it from the kernel interface to
allow drivers like qedi to remove sessions from inside the kernel during
shutdown. This removes the iscsi_uevent code from iscsi_if_stop_conn() so we
can call it in a new helper.

Link: https://lore.kernel.org/r/20220616222738.5722-3-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Mike Christie
c577ab7ba5 scsi: iscsi: Fix HW conn removal use after free
If qla4xxx doesn't remove the connection before the session, the iSCSI
class tries to remove the connection for it. We were doing a
iscsi_put_conn() in the iter function which is not needed and will result
in a use after free because iscsi_remove_conn() will free the connection.

Link: https://lore.kernel.org/r/20220616222738.5722-2-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Ren Zhijie
f54912b228 scsi: ufs: ufs-mediatek: Fix build error and type mismatch
If CONFIG_PM_SLEEP is not set.

make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:

drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
    snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
                                             ~^   ~~~~~~
                                             %lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
  ret = ufshcd_system_suspend(dev);
        ^~~~~~~~~~~~~~~~~~~~~
        ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
  return ufshcd_system_resume(dev);
         ^~~~~~~~~~~~~~~~~~~~
         ufs_mtk_system_resume
cc1: some warnings being treated as errors

The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.

Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:01:12 -04:00
Max Gurtovoy
6a33ed5064 scsi: iscsi: Make iscsi_unregister_transport() return void
This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.

Link: https://lore.kernel.org/r/20220616080210.18531-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:11:18 -04:00
Stanley Chu
cb142b6d2f scsi: ufs: ufs-mediatek: Disable unused VCCQx power rails
Some MediaTek UFS platforms support different VCCQx power rails, for
example, both 1.2v and 1.8v VCCQx, in a single kernel image.

To optimize the system power consumption, provide a way to disable and
release the unused power rail during the device probing.

Link: https://lore.kernel.org/r/20220616053725.5681-12-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:44 -04:00
Stanley Chu
ece418d029 scsi: ufs: ufs-mediatek: Support multiple VCC sources
Support multiple VCC sources in MediaTek UFS platforms.

Two options are provided and distinguished by specific device tree
attributes as below examples,

[Option 1: By numbering]
mediatek,ufs-vcc-by-num;
vcc-opt1-supply = <&mt6373_vbuck4_ufs>;
vcc-opt2-supply = <&mt6363_vemc>;

[Option 2: By UFS version]
mediatek,ufs-vcc-by-ver;
vcc-ufs3-supply = <&mt6373_vbuck4_ufs>;

Link: https://lore.kernel.org/r/20220616053725.5681-11-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:44 -04:00
Stanley Chu
1d6f9decb6 scsi: ufs: Export regulator functions
Export below regulator functions to allow vendors to
customize regulator configuration in their own platforms.

int ufshcd_populate_vreg(struct device *dev, const char *name,
                         struct ufs_vreg **out_vreg);
int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);

Link: https://lore.kernel.org/r/20220616053725.5681-10-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:44 -04:00
Stanley Chu
42b1928360 scsi: ufs: ufs-mediatek: Support low-power mode for parents of VCCQx
Provide the facility to configure parents of VCCQx power rails as low-power
or full-power mode in MediaTek UFS platforms.

Link: https://lore.kernel.org/r/20220616053725.5681-9-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:44 -04:00
Stanley Chu
bc602ae977 scsi: ufs: ufs-mediatek: Support flexible parameters for SMC calls
Provide flexible number of parameters for UFS SMC calls to be used in a
subsequent commit.

Link: https://lore.kernel.org/r/20220616053725.5681-8-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:44 -04:00
Peter Wang
0836cc252a scsi: ufs: ufs-mediatek: Support low-power mode for VCCQ
Allow VCCQ to enter low-power mode, and also remove the restriction of VCC
because VCCQ/VCCQ2 can be changed to low-power mode even if VCC stays on
while the device is not in active power mode.

Link: https://lore.kernel.org/r/20220616053725.5681-7-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00
Po-Wen Kao
005ffdf09c scsi: ufs: ufs-mediatek: Prevent device regulators setting LPM incorrectly
Device regulatrs are allowed to enter low-power mode if neither device is
not in active mode, nor VCC does not keep on.

Fix this by adding conditions before LPM decision.

Link: https://lore.kernel.org/r/20220616053725.5681-6-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00
Po-Wen Kao
3fd23b8dfb scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators
Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.

Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().

Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00
CC Chou
3f9b6cec12 scsi: ufs: ufs-mediatek: Introduce workaround for power mode change
Some MediaTek SoC chips need special flow for power mode change, especially
for chips supporting HS-G5.

Enable the workaround by setting the host-specific capability.

Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: CC Chou <cc.chou@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Dennis Yu <tun-yu.yu@mediatek.com>
Signed-off-by: Peter Wang <peter.want@medaitek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00
Stanley Chu
d81c4c6f71 scsi: ufs: Fix ADAPT logic for HS-G5
ADAPT now is added not only for HS Gear4 mode but also higher gears.  Fix
the logic for higher gears.

Link: https://lore.kernel.org/r/20220616053725.5681-3-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00
Stanley Chu
fc53683b45 scsi: ufs: Export ufshcd_uic_change_pwr_mode()
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for
SoC-specific power mode change design limitations.

Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16 22:08:43 -04:00