IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to
precisely configure the low-power state of the parent of ref-clk.
Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host
hang issue by setting CLK_CG bit before host is enabled.
This operation shall have no side effect on those platforms which do not
support this bit.
Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek decides to always add delays before and after VCC is turned-off.
Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix build warnings:
1.
../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes]
int ufs_mtk_system_suspend(struct device *dev)
^
../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int ufs_mtk_system_suspend(struct device *dev)
^
static
2.
../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver);
~~~ ^~~
%d
Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For code safety, constify arrays and pointers to data which is not
modified.
Link: https://lore.kernel.org/r/20220623102432.108059-4-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For code safety, constify pointers to data which is not modified.
Link: https://lore.kernel.org/r/20220623102432.108059-3-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If CONFIG_PM_SLEEP is not set.
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
~^ ~~~~~~
%lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
ret = ufshcd_system_suspend(dev);
^~~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
return ufshcd_system_resume(dev);
^~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_resume
cc1: some warnings being treated as errors
The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.
Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some MediaTek UFS platforms support different VCCQx power rails, for
example, both 1.2v and 1.8v VCCQx, in a single kernel image.
To optimize the system power consumption, provide a way to disable and
release the unused power rail during the device probing.
Link: https://lore.kernel.org/r/20220616053725.5681-12-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Support multiple VCC sources in MediaTek UFS platforms.
Two options are provided and distinguished by specific device tree
attributes as below examples,
[Option 1: By numbering]
mediatek,ufs-vcc-by-num;
vcc-opt1-supply = <&mt6373_vbuck4_ufs>;
vcc-opt2-supply = <&mt6363_vemc>;
[Option 2: By UFS version]
mediatek,ufs-vcc-by-ver;
vcc-ufs3-supply = <&mt6373_vbuck4_ufs>;
Link: https://lore.kernel.org/r/20220616053725.5681-11-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export below regulator functions to allow vendors to
customize regulator configuration in their own platforms.
int ufshcd_populate_vreg(struct device *dev, const char *name,
struct ufs_vreg **out_vreg);
int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
Link: https://lore.kernel.org/r/20220616053725.5681-10-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide the facility to configure parents of VCCQx power rails as low-power
or full-power mode in MediaTek UFS platforms.
Link: https://lore.kernel.org/r/20220616053725.5681-9-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide flexible number of parameters for UFS SMC calls to be used in a
subsequent commit.
Link: https://lore.kernel.org/r/20220616053725.5681-8-stanley.chu@mediatek.com
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow VCCQ to enter low-power mode, and also remove the restriction of VCC
because VCCQ/VCCQ2 can be changed to low-power mode even if VCC stays on
while the device is not in active power mode.
Link: https://lore.kernel.org/r/20220616053725.5681-7-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device regulatrs are allowed to enter low-power mode if neither device is
not in active mode, nor VCC does not keep on.
Fix this by adding conditions before LPM decision.
Link: https://lore.kernel.org/r/20220616053725.5681-6-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.
Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().
Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some MediaTek SoC chips need special flow for power mode change, especially
for chips supporting HS-G5.
Enable the workaround by setting the host-specific capability.
Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: CC Chou <cc.chou@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Dennis Yu <tun-yu.yu@mediatek.com>
Signed-off-by: Peter Wang <peter.want@medaitek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix
the logic for higher gears.
Link: https://lore.kernel.org/r/20220616053725.5681-3-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for
SoC-specific power mode change design limitations.
Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the
same in driver as well instead of having a different macro name for the
same offset.
Link: https://lore.kernel.org/r/20220615121204.16642-2-alim.akhtar@samsung.com
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove #defines as those are not used anywhere in the driver file.
Link: https://lore.kernel.org/r/20220615121204.16642-1-alim.akhtar@samsung.com
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Constify the drv data because it should not be modified (used by multiple
devices).
Link: https://lore.kernel.org/r/20220613101429.114449-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports
auto-hibernate the capability but only FASTAUTO mode.
Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adds support of UFS HCI which is found in Tesla Full Self-Driving (FSD)
SoC.
Link: https://lore.kernel.org/r/20220610104119.66401-7-alim.akhtar@samsung.com
Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB
clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled
during clock masking/unmasking.
Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.com
Tested-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
The 'info' pointer points to somewhere in the middle of the 'hba' struct.
It can't possibly be NULL. Delete the NULL check.
Link: https://lore.kernel.org/r/YotFotj43TkB8Rid@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).
Update the MAINTAINERS file. Add myself as a UFS reviewer.
Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Keoseong Park <keosung.park@samsung.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
