IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The DW MSHC node in Intel SocFPGA ARM64 DTS has iommus property, so
allow it to silence dtbs_check warnings:
socfpga_n5x_socdk.dtb: mmc@ff808000: Unevaluated properties are not allowed ('iommus' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231209171013.249972-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Previously, during the MSDC calibration process, a full clock cycle
actually not be covered, which in some cases didn't yield the best
results and could cause CRC errors. This problem is particularly
evident when MSDC is used as an SDIO host. In fact, MSDC support
tuning up to a maximum of 64 steps, but by default, the step number
is 32. By increase the tuning step, we are more likely to cover more
parts of a clock cycle, and get better calibration result.
To illustrate, when tuning 32 steps, if the obtained window has a hole
near the middle, like this: 0xffc07ff (hex), then the selected delay
will be the 6 (counting from right to left).
(32 <- 1)
1111 1111 1100 0000 0000 0111 11(1)1 1111
However, if we tune 64 steps, the window obtained may look like this:
0xfffffffffffc07ff. The final selected delay will be 44, which is
safer as it is further away from the hole:
(64 <- 1)
1111 ... (1)111 1111 1111 1111 1111 1100 0000 0000 0111 1111 1111
In this case, delay 6 selected through 32 steps tuning is obviously
not optimal, and this delay is closer to the hole, using it would
easily cause CRC problems.
As per mesaurements taken on mediatek SoC platform, the tuning phase
will take:
eMMC - 32 steps: ~3ms
- 64 steps: ~6ms
SDIO - 32 steps: ~4ms
- 64 steos: ~7ms
Tuning more steps won't prolong boot times by any meaningful amount
of time, so for SD/SDIO the default tuning steps will be adjust to
64. But for eMMC, it is still preferred to use 32 steps tuning as
otherwise there would be performance lose when accessing the RPMB
partition(requiring retuning each time).
You can configure property "mediatek,tuning-step" in MSDC dts node
to adjust the step number.
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231207063535.29546-3-axe.yang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add 'mediatek,tuning-steps' setting. This property will give MSDC
a chance to extend tuning steps up to 64. With more tuning steps,
MSDC may achieve a more optimal calibration result, thus avoiding
potential CRC issues.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231207063535.29546-2-axe.yang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use "/*" instead of "/**" for common C comments to prevent warnings
from scripts/kernel-doc.
sdhci-omap.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
sdhci-omap.c:3: warning: missing initial short description on line:
* SDHCI Controller driver for TI's OMAP SoCs
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202311201117.lFxgJTK6-lkp@intel.com/
Link: https://lore.kernel.org/r/20231206055855.21092-1-rdunlap@infradead.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When RPMB was converted to a character device, it added support for
multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to
a character device").
One of the changes in this commit was transforming the variable target_part
defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed
the validation check done in mmc_blk_part_switch_pre() and
mmc_blk_part_switch_post(), so let's fix it.
Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device")
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This log message is necessary for debugging, so enable it by default to
debug issues that are hard to reproduce locally.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231201102747.3854573-1-treapking@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.
Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.
Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ti,otap-del-sel has been deprecated since v5.7 and there are no users of
this property and no documentation in the DT bindings either.
Drop the fallback code looking for this property, this makes
sdhci_am654_get_otap_delay() much easier to read as all the TAP values
can be handled via a single iterator loop.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231122060215.2074799-1-vigneshr@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) |
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ||
875 | (device_property_read_bool(dev, "mmc-hs400-1_8v")))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning
drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) |
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ||
874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning
2 errors generated.
There is little reason for this if statement to use bitwise ORs, as the
short circuiting of logical OR does not need to be avoided in this
context; it would be wasteful to call device_property_read_bool() three
times if the first two calls returned true. Switch to logical OR to fix
the warning.
While in the area, the parentheses around the calls to
device_property_read_bool() are not necessary and make the if statement
harder to read, so remove them.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1960
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231116-sdhci-of-dwcmshc-fix-wbitwise-instead-of-logical-v1-1-7e1a7f4ccaab@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHI block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,sdhi-r9a07g043" compatible string will be used on the
RZ/Five SoC so to make this clear and to keep this file consistent, update
the comment to include RZ/Five SoC.
No driver changes are required as generic compatible string
"renesas,rcar-gen3-sdhi" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20231115203254.30544-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add gate property in example node for Xilinx platforms which will be used
to ungate the DLL clock. DLL clock is required for higher frequencies like
50MHz, 100MHz and 200MHz.
DLL clock is automatically selected by the SD controller when the SD
output clock frequency is more than 25 MHz.
Signed-off-by: Swati Agarwal <swati.agarwal@amd.com>
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231114102321.1147951-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the mmc controller in the T-Head TH1520 with the new
compatible "thead,th1520-dwcmshc". Implement custom sdhci_ops for
set_uhs_signaling, reset, voltage_switch, and platform_execute_tuning.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231109-th1520-mmc-v5-3-018bd039cf17@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Expose __sdhci_execute_tuning() so that it can be called from the
mmc host controller drivers.
In the sdhci-of-dwcmshc driver, sdhci_dwcmshc_th1520_ops sets
platform_execute_tuning to th1520_execute_tuning(). That function has
to manipulate phy registers before tuning can be performed. To avoid
copying the code verbatim from __sdhci_execute_tuning() into
th1520_execute_tuning(), make it possible for __sdhci_execute_tuning()
to be called from sdhci-of-dwcmshc.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231109-th1520-mmc-v5-2-018bd039cf17@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the support of SDIO in-band interrupt mode for STM32 and Ux500
variants.
It allows the SD I/O card to interrupt the host on SDMMC_D1 data line.
It is not enabled by default on Ux500 variant as this is unstable and
Ux500 users should use out-of-band IRQs.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231108141637.119497-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending
HS CMD13") set HS clock (52MHz) before switching to HS mode. For this
freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9).
Then we set rx_clk_phase to 11 or 15 which is out of range and make
hardware frozen. After we send command request, no irq will be
interrupted and the mmc driver will keep to wait for request finished,
even durning rebooting.
So let's set it to Phase 90 which should work in most cases. Then let
meson_mx_sdhc_execute_tuning() to find the accurate value for data
transfer.
If this doesn't work, maybe need to define a factor in dts.
Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=g+0x
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
This pull request includes a single patch to fix long-standing issue of
memory leak at failure of device registration for fw_unit. We rarely
encounter the issue, while it should be applied to stable releases, since
it fixes inappropriate API usage.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZWrgUQAKCRCsLtaWM8Lw
Ew8iAQDWPv5JItuZneeRs6NisGxtwNxyxP+O3qmSG4LxXOVfzAEA+K7ubreLee2a
lfZkWPeZnWtSIdN+eAm4JfKMhzDfrA4=
=oODB
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
device registration for fw_unit. We rarely encounter the issue, but it
should be applied to stable releases, since it fixes inappropriate API
usage"
* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix possible memory leak in create_units()
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace crashes
when using io-uring workers (in particular with MariaDB).
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector registers.
Thanks to: Timothy Pearson, Jens Axboe, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=v1AA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace
crashes when using io-uring workers (in particular with MariaDB)
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector
registers
Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin.
* tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
powerpc: Don't clobber f0/vs0 during fp|altivec register save
- Fix the lifecycle of a mutex in the pds variant driver such that
a reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex.
Also switch a different lock from spinlock to mutex as the code
path has the potential to sleep and doesn't need the spinlock
context otherwise. (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get
an undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which
resolves some of this symbol ugliness, but also fixes Kconfig
dependencies. (Sean Christopherson)
-----BEGIN PGP SIGNATURE-----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=p0kR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio
Pull vfio fixes from Alex Williamson:
- Fix the lifecycle of a mutex in the pds variant driver such that a
reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex. Also
switch a different lock from spinlock to mutex as the code path has
the potential to sleep and doesn't need the spinlock context
otherwise (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get an
undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which resolves
some of this symbol ugliness, but also fixes Kconfig dependencies
(Sean Christopherson)
* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
vfio/pds: Fix possible sleep while in atomic context
vfio/pds: Fix mutex lock->magic != lock warning
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZWraswAKCRCAXGG7T9hj
vlV0AP9241p7vHlIW6PIdfNZt9/dZZpuFnKHz+cE99pTZDl5nwEAoYqXUm/kEb14
VAy7x0XIVdEt+9l4bgO2Qggx+Y184Qs=
=APgm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the Xen event driver setting the correct return value when
experiencing an allocation failure
- A fix for allocating space for a struct in the percpu area to not
cross page boundaries (this one is for x86, a similar one for Arm was
already in the pull request for rc3)
* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: fix error code in xen_bind_pirq_msi_to_irq()
x86/xen: fix percpu vcpu_info allocation
- objpool: Fix objpool overrun case on memory/cache access delay especially
on the big.LITTLE SoC. The objpool uses a copy of object slot index
internal loop, but the slot index can be changed on another processor
in parallel. In that case, the difference of 'head' local copy and the
'slot->last' index will be bigger than local slot size. In that case,
we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer()
and rcu_dereference_check() correctly. Also adding __rcu tag for
finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The same
as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu
tag for finding wrong usage by sparse.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVpfBobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bNyMIAJSLICKQNuFiBJEn/rty
ACWJ9QMOnwi0DoVaepG/m9QJh6AIUUFW4//9helmSm0GIVzxQ2+f8UeKU+sYiVtH
ro9atea4W4+FMTvtEB1cU8oG5CDVT4WQdUXbjMktqYe3+WB8Zt8+fIP0mnbTFAVr
yStpliGPecmlupJVRYqrJGyDdbkUxXxVlPsP/eDrHFgbBWv8Incw0f+MLGSi6LSE
sZ1MaKCdi2tlHbtD/fiowfLoBMZwQAKY4hq/XguVsWh+BGaGUgwtif+8ESwPeu22
KEZLyWDQ1N8XBHyOBotV7vsBEwh6LKtLGVXIBsO4KxVyGw6msxWBis0dt/tkn+kk
LEg=
=B9WK
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix objpool overrun case on memory/cache access delay
especially on the big.LITTLE SoC. The objpool uses a copy of object
slot index internal loop, but the slot index can be changed on
another processor in parallel. In that case, the difference of 'head'
local copy and the 'slot->last' index will be bigger than local slot
size. In that case, we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use
rcu_assign_pointer() and rcu_dereference_check() correctly. Also
adding __rcu tag for finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The
same as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds
__rcu tag for finding wrong usage by sparse.
* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook: Use __rcu pointer for rethook::handler
kprobes: consistent rcu api usage for kretprobe holder
lib: objpool: fix head overrun on RK3588 SBC
- Fix the AMD P-state driver's EPP sysfs interface in the cases when the
performance governor is in use (Ayush Jain).
- Make the ->fast_switch() callback in the AMD P-state driver return the
target frequency as expected (Gautham R. Shenoy).
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny).
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent performance
states votes from runtime-suspended devices from being lost across
a system suspend-resume cycle in qcom-cpufreq-nvmem (Stephan Gerhold).
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph Niedermaier).
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=/TF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
in the power-capping DTPM framework.
Specifics:
- Fix the AMD P-state driver's EPP sysfs interface in the cases when
the performance governor is in use (Ayush Jain)
- Make the ->fast_switch() callback in the AMD P-state driver return
the target frequency as expected (Gautham R. Shenoy)
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny)
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent
performance states votes from runtime-suspended devices from being
lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
(Stephan Gerhold)
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph
Niedermaier)
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba)"
* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Only print supported EPP values for performance governor
cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
powercap: DTPM: Fix unneeded conversions to micro-Watts
cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
- Fix a recently introduced build issue on ARM32 platforms caused by an
inadvertent header file breakage (Dave Jiang).
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer dereferences
after recent ACPI core changes (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=ANS/
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
pointer dereference in the ACPI backlight driver due to a design issue
exposed by a recent change in the ACPI bus type code.
Specifics:
- Fix a recently introduced build issue on ARM32 platforms caused by
an inadvertent header file breakage (Dave Jiang)
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer
dereferences after recent ACPI core changes (Hans de Goede)"
* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Use acpi_video_device for cooling-dev driver data
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
systems that don't need it.
-----BEGIN PGP SIGNATURE-----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=kXj+
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix a regression where the arm64 KPTI ends up enabled even on systems
that don't need it"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Avoid enabling KPTI unnecessarily
Including:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
-----BEGIN PGP SIGNATURE-----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=O/Sr
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix printk arg in of_iommu_get_resv_regions()
iommu/vt-d: Set variable intel_dirty_ops to static
iommu/vt-d: Fix incorrect cache invalidation for mm notification
iommu/vt-d: Add MTL to quirk list to skip TE disabling
iommu/vt-d: Make context clearing consistent with context mapping
iommu/vt-d: Disable PCI ATS in legacy passthrough mode
iommu/vt-d: Omit devTLB invalidation requests when TES=0
iommu/vt-d: Support enforce_cache_coherency only for empty domains
iommu: Avoid more races around device probe
MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
iommu: Flow ERR_PTR out from __iommu_domain_alloc()
No surprise here, including only a collection of HD-audio
device-specific small fixes.
-----BEGIN PGP SIGNATURE-----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=57FL
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise here, including only a collection of HD-audio
device-specific small fixes"
* tag 'sound-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Disable power-save on KONTRON SinglePC
ALSA: hda/realtek: Add supported ALC257 for ChromeOS
ALSA: hda/realtek: Headset Mic VREF to 100%
ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format
ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI
ALSA: cs35l41: Fix for old systems which do not support command
ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running
ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro
drm:
- Revert unexport of prime helpers for fd/handle conversion
dma_resv:
- Do not double add fences in dma_resv_add_fence.
gpuvm:
- Fix GPUVM license identifier.
i915:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
panel:
- Revert panel fixes as they require exporting device_is_dependent.
nouveau:
- fix oversized allocations in new vm path
- fix zero-length array
- remove a stray lock
nt36523:
- Fix error check for nt36523.
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()
-----BEGIN PGP SIGNATURE-----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=YlVI
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-12-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly amdgpu fixes with a scattering of nouveau, i915,
and a couple of reverts. Hopefully it will quieten down in coming
weeks.
drm:
- Revert unexport of prime helpers for fd/handle conversion
dma_resv:
- Do not double add fences in dma_resv_add_fence.
gpuvm:
- Fix GPUVM license identifier.
i915:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
panel:
- Revert panel fixes as they require exporting device_is_dependent.
nouveau:
- fix oversized allocations in new vm path
- fix zero-length array
- remove a stray lock
nt36523:
- Fix error check for nt36523.
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()"
* tag 'drm-fixes-2023-12-01' of git://anongit.freedesktop.org/drm/drm: (53 commits)
Revert "drm/prime: Unexport helpers for fd/handle conversion"
drm/amdgpu: Use another offset for GC 9.4.3 remap
drm/amd/display: Fix some HostVM parameters in DML
drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit
drm/amdgpu: Update EEPROM I2C address for smu v13_0_0
drm/amd/display: Allow DTBCLK disable for DCN35
drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer
drm/amd: Enable PCIe PME from D3
drm/amd/pm: fix a memleak in aldebaran_tables_init
drm/amdgpu: fix AGP addressing when GART is not at 0
drm/amd/display: update dcn315 lpddr pstate latency
drm/amd/display: fix ABM disablement
drm/amd/display: Fix black screen on video playback with embedded panel
drm/amd/display: Fix conversions between bytes and KB
drm/amdkfd: Use common function for IP version check
drm/amd/display: Remove config update
drm/amd/display: Update DCN35 clock table policy
drm/amd/display: force toggle rate wa for first link training for a retimer
drm/amdgpu: correct the amdgpu runtime dereference usage count
drm/amd/display: Update min Z8 residency time to 2100 for DCN314
...
-----BEGIN PGP SIGNATURE-----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=wA/u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.7-2023-11-30' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix an issue with discontig page checking for IORING_SETUP_NO_MMAP
- Fix an issue with not allowing IORING_SETUP_NO_MMAP also disallowing
mmap'ed buffer rings
- Fix an issue with deferred release of memory mapped pages
- Fix a lockdep issue with IORING_SETUP_NO_MMAP
- Use fget/fput consistently, even from our sync system calls. No real
issue here, but if we were ever to allow closing io_uring descriptors
it would be required. Let's play it safe and just use the full ref
counted versions upfront. Most uses of io_uring are threaded anyway,
and hence already doing the full version underneath.
* tag 'io_uring-6.7-2023-11-30' of git://git.kernel.dk/linux:
io_uring: use fget/fput consistently
io_uring: free io_buffer_list entries via RCU
io_uring/kbuf: prune deferred locked cache when tearing down
io_uring/kbuf: recycle freed mapped buffer ring entries
io_uring/kbuf: defer release of mapped buffer rings
io_uring: enable io_mem_alloc/free to be used in other parts
io_uring: don't guard IORING_OFF_PBUF_RING with SETUP_NO_MMAP
io_uring: don't allow discontig pages for IORING_SETUP_NO_MMAP
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmVqKo4QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqL9D/9bPvuA+Oogx+C/kNConjxnuyPBiXcZjb/4
5gO/6N0FC8yu+HQqgscGTyEjJO2FKfLx+YxxBs1UVIt4Tm+jZwC3nPqw9X4W3RCz
pK9fxCNlzxey0SZU3ZJQIOtqP3df5Yuas9V/h35GS4m1XaoDE6cPpsIVUrAnoNwg
W990L8sOy6y4XzMPzyHJCyoDCay1Qp2ly0Vdlz4/ESRmEp564i42nFN+8zpZ/w7h
V+Ekn6JwP1ssqUeY/k43QcfRzYwSvvnTQJ1y9t3erf6HcHtpbCgnL1jTaGEmr4IS
1sw3ffqo23xBSsGP+D2OF4+9pwGI9+xwNpYnRdrpDPxKhCn5EEh+g6+f+m7YEnFV
q1swlMTqHtRLFdYbKe8Tl8hPRwEeSpKy8sXph56hwGZY0T/IyB+Pe3aXrh1DYPA5
4+GASZHFQPH82P1ibVNdpMRZe4rPPblw38GZauZ1JbI0m0zXqEveB2AgZeCcw1ky
l7KBdMdGBqSWYVmfKcJd3f30vKPyhMSp4eE9/LFp24vmyIIw+dSp6vup0yrM6jk9
taUU6PCHzaxmI1YGz1BzNVa8cfYKB6aiWeQ2OGa4Z7ba4TuksMLkbfVvu21jdi+z
PsL/KlqPSPwFL/3XAZagIb3BXUhoQyfwIU8GnAuw2wTU5RJzWnbwF3wXpNaBIJxI
8y5OWsFqIg==
=5kb6
-----END PGP SIGNATURE-----
Merge tag 'block-6.7-2023-12-01' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Invalid namespace identification error handling (Marizio Ewan,
Keith)
- Fabrics keep-alive tuning (Mark)
- Fix for a bad error check regression in bcache (Markus)
- Fix for a performance regression with O_DIRECT (Ming)
- Fix for a flush related deadlock (Ming)
- Make the read-only warn on per-partition (Yu)
* tag 'block-6.7-2023-12-01' of git://git.kernel.dk/linux:
nvme-core: check for too small lba shift
blk-mq: don't count completed flush data request as inflight in case of quiesce
block: Document the role of the two attribute groups
block: warn once for each partition in bio_check_ro()
block: move .bd_inode into 1st cacheline of block_device
nvme: check for valid nvme_identify_ns() before using it
nvme-core: fix a memory leak in nvme_ns_info_from_identify()
nvme: fine-tune sending of first keep-alive
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
frees it. Also fix alignment of struct dm_verity_fec_io within the
per-bio-data.
- Fix DM verity target to not FEC failed readahead IO.
- Update DM flakey target to use MAX_ORDER rather than MAX_ORDER - 1.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmVqIjwACgkQxSPxCi2d
A1pcwAgA00/Fln0p84cD3wFKauC61RALx5awoS0S2obAN+JY9yLs3xl1XDm92HyI
9giOXofHVKIlOQW6qASfZoCNGvtKPCVoKZF9KXKCqpK8wyKpuuG+yTPVeSsOK/fw
pKcPp3FyXsu+9FXH3oO9xauLPOiGDC7BfIcHFQITHzT7qwMxQcPQ1HwfVwjrWIjG
lgIQToiSZokBKBWXKyo63SMVkwWhlTdrfG1CJrc0UC9/f6DBMS0RTYJqmNJ3V8ak
i0QyQdGZxc9TFuZe/G+Oq381z+X42iRDlluVU3ClMQTyoemQRcySi98CjRLruu7x
1H79s8ZIaJc/4mkxlJUQingL+dmuGA==
=Av5r
-----END PGP SIGNATURE-----
Merge tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's FEC support to always initialize IO before it
frees it. Also fix alignment of struct dm_verity_fec_io within the
per-bio-data
- Fix DM verity target to not FEC failed readahead IO
- Update DM flakey target to use MAX_ORDER rather than MAX_ORDER - 1
* tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-flakey: start allocating with MAX_ORDER
dm-verity: align struct dm_verity_fec_io properly
dm verity: don't perform FEC for failed readahead IO
dm verity: initialize fec io before freeing it
3 small fixes, one in drivers. The core changes are to the internal
representation of flags in scsi_devices which removes space wasting
bools in favour of single bit flags and to add a flag to force a
runtime resume which is used by ATA devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZWjFkSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheG9AP9CIjOP
8g3+RCnysbYlctJBsacaLyq9kROyaOY7dnKudQEArMGZ609afSXYrHGzBCtQ8F6T
Cvge1QVk00Bu4tKvA6Y=
=2Q9R
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, one in drivers.
The core changes are to the internal representation of flags in
scsi_devices which removes space wasting bools in favour of single bit
flags and to add a flag to force a runtime resume which is used by ATA
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix system start for ATA devices
scsi: Change SCSI device boolean fields to single bit flags
scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmVpr4QACgkQnJ2qBz9k
QNkoPQf/aurRZZcMHmcYEmd//O59iRXYQVgO9+ORtjqIgB4wHD5q5eYK70eatxmR
nZkntlFZSTUj9bbgzwOJWzhrsBGfZ2tWY1JFQl/Dlk2nF02rg2aIt1ZksqtNF4wX
Qt/yGpf+5ubYLxmpxHhBirR3l9DgBppZsTbS2oY5ki17IM4+eOrvMWHHyMcO9Tpb
jWaiqDueZRL6HCP52cusAJZ6x72vJzivbGGQffbfR4NNGz4YXaiCUQcCnAoW8xcO
u8xTZ1iH6jrolBSJHNA9fKoYN69aTjPkGFQFnZuOBBgVlUyWYXeJO+9psxusqhE0
FrghuuGZMhQNkTAKbJTpmeMQ8XRYFQ==
=Lhm6
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"Fix an ext2 bug introduced by changes in ext2 & iomap stepping on each
other toes (apparently ext2 driver does not get much testing in
linux-next)"
* tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix ki_pos update for DIO buffered-io fallback case
Bigger/user visible fixes:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times )
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
https://evilpiepirate.org/~testdashboard/ci?branch=bcachefs-for-upstream
-----BEGIN PGP SIGNATURE-----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=vN+y
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs bugfixes from Kent Overstreet:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times)
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
bcachefs: Extra kthread_should_stop() calls for copygc
bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
bcachefs: Fix race between btree writes and metadata drop
bcachefs: move journal seq assertion
bcachefs: -EROFS doesn't count as move_extent_start_fail
bcachefs: trace_move_extent_start_fail() now includes errcode
bcachefs: Fix split_race livelock
bcachefs: Fix bucket data type for stripe buckets
bcachefs: Add missing validation for jset_entry_data_usage
bcachefs: Fix zstd compress workspace size
bcachefs: bpos is misaligned on big endian
bcachefs: Fix ec + durability calculation
bcachefs: Data update path won't accidentaly grow replicas
bcachefs: deallocate_extra_replicas()
bcachefs: Proper refcounting for journal_keys
bcachefs: preserve device path as device name
bcachefs: Fix an endianness conversion
bcachefs: Start gc, copygc, rebalance threads after initing writes ref
bcachefs: Don't stop copygc thread on device resize
bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
...
Merge a fix for a recently introduced build issue on ARM32 platforms
caused by an inadvertent header file breakage (Dave Jiang).
* acpi-tables:
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
Merge a power capping fix for 6.7-rc4 which eliminates unnecessary
and harmful conversions to uW from the DTPM (dynamic thermal and power
management) framework (Lukasz Luba).
* powercap:
powercap: DTPM: Fix unneeded conversions to micro-Watts
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Request queue quiesce may interrupt flush sequence, and the original request
may have been marked as COMPLETE, but can't get finished because of
queue quiesce.
This way is fine from driver viewpoint, because flush sequence is block
layer concept, and it isn't related with driver.
However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count &
drain inflight requests, then the wait & drain never gets done because
the completed & not-finished flush request is counted as inflight.
Fix this issue by not counting completed flush data request as inflight in
case of quiesce.
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: David Jeffery <djeffery@redhat.com>
Cc: John Pittman <jpittman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable phys is defined as (struct resource *) which aligns with
the printk format specifier %pr. Taking the address of it results in a
value of type (struct resource **) which is incompatible with the format
specifier %pr. Therefore, remove the address of operator (&).
Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
objpool overrun stress with test_objpool on OrangePi5+ SBC triggered the
following kernel warnings:
WARNING: CPU: 6 PID: 3115 at lib/objpool.c:168 objpool_push+0xc0/0x100
This message is from objpool.c:168:
WARN_ON_ONCE(tail - head > pool->nr_objs);
The overrun test case is to validate the case that pre-allocated objects
are insufficient: 8 objects are pre-allocated for each node and consumer
thread per node tries to grab 16 objects in a row. The testing system is
OrangePI 5+, with RK3588, a big.LITTLE SOC with 4x A76 and 4x A55. When
disabling either all 4 big or 4 little cores, the overrun tests run well,
and once with big and little cores mixed together, the overrun test would
always cause an overrun loop. It's likely the memory timing differences
of big and little cores cause this trouble. Here are the debugging data
of objpool_try_get_slot after try_cmpxchg_release:
objpool_pop: cpu: 4/0 0:0 head: 278/279 tail:278 last:276/278
The local copies of 'head' and 'last' were 278 and 276, and reloading of
'slot->head' and 'slot->last' got 279 and 278. After try_cmpxchg_release
'slot->head' became 'head + 1', which is correct. But what's wrong here
is the stale value of 'last', and that stale value of 'last' finally led
the overrun of 'head'.
Memory updating of 'last' and 'head' are performed in push() and pop()
independently, which could be the culprit leading this out of order
visibility of 'last' and 'head'. So for objpool_try_get_slot(), it's
not enough only checking the condition of 'head != slot', the implicit
condition 'last - head <= nr_objs' must also be explicitly asserted to
guarantee 'last' is always behind 'head' before the object retrieving.
This patch will check and try reloading of 'head' and 'last' to ensure
'last' is behind 'head' at the time of object retrieving. Performance
testings show the average impact is about 0.1% for X86_64 and 1.12% for
ARM64. Here are the results:
OS: Debian 10 X86_64, Linux 6.6rc
HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s
1T 2T 4T 8T 16T
native: 49543304 99277826 199017659 399070324 795185848
objpool: 29909085 59865637 119692073 239750369 478005250
objpool+: 29879313 59230743 119609856 239067773 478509029
32T 48T 64T 96T 128T
native: 1596927073 2390099988 2929397330 3183875848 3257546602
objpool: 957553042 1435814086 1680872925 2043126796 2165424198
objpool+: 956476281 1434491297 1666055740 2041556569 2157415622
OS: Debian 11 AARCH64, Linux 6.6rc
HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s
1T 2T 4T 8T 16T
native: 30890508 60399915 123111980 242257008 494002946
objpool: 14742531 28883047 57739948 115886644 232455421
objpool+: 14107220 29032998 57286084 113730493 232232850
24T 32T 48T 64T 96T
native: 746406039 1000174750 1493236240 1998318364 2942911180
objpool: 349164852 467284332 702296756 934459713 1387898285
objpool+: 348388180 462750976 696606096 927865887 1368402195
Link: https://lore.kernel.org/all/20231114115148.298821-1-wuqiang.matt@bytedance.com/
Fixes: b4edb8d2d464 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This KUnit fixes update for Linux 6.7-rc4 consists of three fixes to
warnings and run-time test behavior. With these fixes, test suite
counter will be reset correctly before running tests, kunit will warn
if tests are too slow, and eliminate warning when kfree() as an action.
-----BEGIN PGP SIGNATURE-----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=g2ql
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to warnings and run-time test behavior. With these fixes,
test suite counter will be reset correctly before running tests, kunit
will warn if tests are too slow, and eliminate warning when kfree() as
an action"
* tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: test: Avoid cast warning when adding kfree() as an action
kunit: Reset suite counter right before running tests
kunit: Warn if tests are slow
