IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit aa1262ca66957183ea1fb32a067e145b995f3744 upstream.
As per hardware datasheet its recommended that we check the device
status before reading devid assigned by auto-enumeration.
Without this patch we see SoundWire devices with invalid enumeration
addresses on the bus.
Cc: stable@vger.kernel.org
Fixes: a6e6581942ca ("soundwire: qcom: add auto enumeration support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706095644.5852-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c96a3c7d49593ef15805f5e497601c87695abc9 upstream.
While requesting a new mailbox command, driver does not write any data to
unused registers. Initialize the unused register value to zero while
requesting a new mailbox command to prevent stale entry access by firmware.
Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3455607fd7be10b449f5135c00dc306b85dc0d21 upstream.
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com
Cc: <stable@vger.kernel.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0948a9c5386095baae4012190a6b65aba684a907 upstream.
VMID introduced an extra increment of cmd_pending, causing double-counting
of the I/O. The normal increment ios performed in lpfc_get_scsi_buf.
Link: https://lore.kernel.org/r/20220701211425.2708-5-jsmart2021@gmail.com
Fixes: 33c79741deaf ("scsi: lpfc: vmid: Introduce VMID in I/O path")
Cc: <stable@vger.kernel.org> # v5.14+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06674fc7c003b9d0aa1d37fef7ab2c24802cc6ad upstream.
The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.
The following log reveals it:
[ 32.374955] isl29028 0-0010: remove
[ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[ 32.385461] Call Trace:
[ 32.385807] sysfs_unmerge_group+0x59/0x110
[ 32.386110] dpm_sysfs_remove+0x58/0xc0
[ 32.386391] device_del+0x296/0xe50
[ 32.386959] cdev_device_del+0x1d/0xd0
[ 32.387231] devm_iio_device_unreg+0x27/0xb0
[ 32.387542] devres_release_group+0x319/0x3d0
[ 32.388162] i2c_device_remove+0x93/0x1f0
Fixes: 2db5054ac28d ("staging: iio: isl29028: add runtime power management support")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220717004241.2281028-1-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e1f91850365de55ca74945866c002fda8f00331 upstream.
iio_format_avail_range() should print range as follow [min, step, max], so
the function was previously calling iio_format_list() with length = 3,
length variable refers to the array size of values not the number of
elements. In case of non IIO_VAL_INT values each element has integer part
and decimal part. With length = 3 this would cause premature end of loop
and result in printing only one element.
Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Fixes: eda20ba1e25e ("iio: core: Consolidate iio_format_avail_{list,range}()")
Link: https://lore.kernel.org/r/20220718130706.32571-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b9ba6135d7f18b82f3d8bebb55ded725ba88e0e upstream.
UML generally does not provide access to special CPU instructions like
RDRAND, and execution tends to be rather deterministic, with no real
hardware interrupts, making good randomness really very hard, if not
all together impossible. Not only is this a security eyebrow raiser, but
it's also quite annoying when trying to do various pieces of UML-based
automation that takes a long time to boot, if ever.
Fix this by trivially calling getrandom() in the host and using that
seed as "bootloader randomness", which initializes the rng immediately
at UML boot.
The old behavior can be restored the same way as on any other arch, by
way of CONFIG_TRUST_BOOTLOADER_RANDOMNESS=n or
random.trust_bootloader=0. So seen from that perspective, this just
makes UML act like other archs, which is positive in its own right.
Additionally, wire up arch_get_random_{int,long}() in the same way, so
that reseeds can also make use of the host RNG, controllable by
CONFIG_TRUST_CPU_RANDOMNESS and random.trust_cpu, per usual.
Cc: stable@vger.kernel.org
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6496e0a4a90d8149203c16323cff3fa46e422e7 upstream.
Commit e3a33af812c6 ("um: fix and optimize xor select template for CONFIG64 and timetravel mode")
caused a build regression when CONFIG_XOR_BLOCKS and CONFIG_UML_TIME_TRAVEL_SUPPORT
are selected.
Fix it by removing the straying parenthesis.
Cc: stable@vger.kernel.org
Fixes: e3a33af812c6 ("um: fix and optimize xor select template for CONFIG64 and timetravel mode")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
[rw: Added commit message]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 upstream.
In current implementation the Arasan NAND driver is updating the
system clock(i.e., anand->clk) in accordance to the timing modes
(i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the
flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be
updated instead. This patch keeps the system clock unchanged and updates
the NAND bus clock as per the timing modes.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-2-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e16eceea863b417fd328588b1be1a79de0bc937f upstream.
According to the Arasan NAND controller spec, the flash clock rate for SDR
must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
which would result in incorrect behavior for NV-DDR modes 0-4.
The appropriate clock rate can be calculated from the NV-DDR timing
parameters as 1/tCK, or for rates measured in picoseconds,
10^12 / nand_nvddr_timings->tCK_min.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Olga Kitaina <okitain@gmail.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc4d31684974d140250f3ee612c3f0cab13b3146 upstream.
[BUG]
If we have a btrfs image with dirty log, along with an unsupported RO
compatible flag:
log_root 30474240
...
compat_flags 0x0
compat_ro_flags 0x40000003
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID |
unknown flag: 0x40000000 )
Then even if we can only mount it RO, we will still cause metadata
update for log replay:
BTRFS info (device dm-1): flagging fs with big metadata feature
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): has skinny extents
BTRFS info (device dm-1): start tree-log replay
This is definitely against RO compact flag requirement.
[CAUSE]
RO compact flag only forces us to do RO mount, but we will still do log
replay for plain RO mount.
Thus this will result us to do log replay and update metadata.
This can be very problematic for new RO compat flag, for example older
kernel can not understand v2 cache, and if we allow metadata update on
RO mount and invalidate/corrupt v2 cache.
[FIX]
Just reject the mount unless rescue=nologreplay is provided:
BTRFS error (device dm-1): cannot replay dirty log with unsupport optional features (0x40000000), try rescue=nologreplay instead
We don't want to set rescue=nologreply directly, as this would make the
end user to read the old data, and cause confusion.
Since the such case is really rare, we're mostly fine to just reject the
mount with an error message, which also includes the proper workaround.
CC: stable@vger.kernel.org #4.9+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c46091ee985ae84c60c5e95055d779fcd291d87 upstream.
Syzbot found a Use After Free bug in compute_effective_progs().
The reproducer creates a number of BPF links, and causes a fault
injected alloc to fail, while calling bpf_link_detach on them.
Link detach triggers the link to be freed by bpf_link_free(),
which calls __cgroup_bpf_detach() and update_effective_progs().
If the memory allocation in this function fails, the function restores
the pointer to the bpf_cgroup_link on the cgroup list, but the memory
gets freed just after it returns. After this, every subsequent call to
update_effective_progs() causes this already deallocated pointer to be
dereferenced in prog_list_length(), and triggers KASAN UAF error.
To fix this issue don't preserve the pointer to the prog or link in the
list, but remove it and replace it with a dummy prog without shrinking
the table. The subsequent call to __cgroup_bpf_detach() or
__cgroup_bpf_detach() will correct it.
Fixes: af6eea57437a ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Reported-by: <syzbot+f264bffdfbd5614f3bb2@syzkaller.appspotmail.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://syzkaller.appspot.com/bug?id=8ebf179a95c2a2670f7cf1ba62429ec044369db4
Link: https://lore.kernel.org/bpf/20220517180420.87954-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ba14043621f4afdf3ad5f92ee2d8dbebbe4340 upstream.
When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.
For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.
v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7860cbee9989882d2908682526a5ef617523cfe upstream.
The code assumes that Tegra GEM is permanently vmapped, which is not
true for the scattered buffers. After converting Tegra video decoder
driver to V4L API, we're now getting a BUG_ON from dma-buf core on playing
video using libvdpau-tegra on T30+ because tegra_gem_prime_vmap() sets
vaddr to NULL. Older pre-V4L video decoder driver wasn't vmapping dma-bufs.
Fix it by actually vmapping the exported GEMs.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca0367ca5d9216644b41f86348d6661f8d9e32d8 upstream.
It looks like that when we moved nouveau over to using drm_dp_aux_init()
and registering it's aux bus during late connector registration, we totally
forgot to fix the failure codepath in nouveau_connector_create() - as it
still seems to assume that drm_dp_aux_init() can fail (it can't).
So, let's fix that and also add a missing check to ensure that we've
properly allocated nv_connector->aux.name while we're at it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: fd43ad9d47e7 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister")
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20220526204313.656473-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c96cfaf8fc02d4bb70727dfa7ce7841a3cff9be2 upstream.
While trying to fix another issue, it occurred to me that I don't actually
think there is any situation where we want pm_runtime_put() in nouveau to
be synchronous. In fact, this kind of just seems like it would cause
issues where we may unexpectedly block a thread we don't expect to be
blocked.
So, let's only use pm_runtime_put_autosuspend().
Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: 3a6536c51d5d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c441d28945fb113220d48d6c86ebc0b090a2b677 upstream.
This check determines whether a given address is part of
image 0 or image 1. Image 1 starts at offset image0_size,
so that address should be included.
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511163716.3520591-1-ttabi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a710a8bc909313951eb9252d8419924c771d7c2 upstream.
The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE
from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV
registers are not read subsequently also as required.
Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is
done during connector detection. While at it also fix up the same call
in drm_dp_mst_dump_topology().
Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614094537.885472-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 009a3a52791f31c57d755a73f6bc66fbdd8bd76c upstream.
Fix a number of compile errors by including the correct header
files. Examples are shown below.
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
25 | struct hyperv_drm_device *hv = to_hv(fb->dev);
| ^~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
59 | count = drm_add_modes_noedid(connector,
| ^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]
62 | drm_set_preferred_mode(connector, hv->preferred_width,
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Fixes: 720cf96d8fec ("drm: Drop drm_framebuffer.h from drm_crtc.h")
Fixes: 255490f9150d ("drm: Drop drm_edid.h from drm_crtc.h")
Cc: Deepak Rawat <drawat.floss@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622083413.12573-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae25885bdf59fde40726863c57fd20e4a0642183 upstream.
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name.
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 67b723f5b742 ("drm/fb-helper: Calculate damaged area in separate helper")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v5.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20220621104617.8817-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0dce5c4fdaf9e98dd2755ffb1363822854b6287 upstream.
Until now, when running at the maximum resolution of 1280x720 at 32bpp
on the JZ4770 SoC the output was garbled, the X/Y position of the
top-left corner of the framebuffer warping to a random position with
the whole image being offset accordingly, every time a new frame was
being submitted.
This problem can be eliminated by using a bigger burst size for the DMA.
Set in each soc_info structure the maximum burst size supported by the
corresponding SoC, and use it in the driver.
Set the new value using regmap_update_bits() instead of
regmap_set_bits(), since we do want to override the old value of the
burst size. (Note that regmap_set_bits() wasn't really valid before for
the same reason, but it never seemed to be a problem).
Cc: <stable@vger.kernel.org>
Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220702230727.66704-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db2b927f8668adf3ac765e0921cd2720f5c04172 upstream.
The dmas property is used to hold the dmaengine channel used for audio
output.
Older device trees were missing that property, so if it's not there we
disable the audio output entirely.
However, some overlays have set an empty value to that property, mostly
to workaround the fact that overlays cannot remove a property. Let's add
a test for that case and if it's empty, let's disable it as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Link: https://lore.kernel.org/r/20220613144800.326124-18-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df4aaf015775221dde8a51ee09edb919981f091e upstream.
The vmapping of dma-buf may succeed, but DRM SHMEM rejects the IOMEM
mapping, and thus, drm_gem_shmem_vmap_locked() should unvmap the IOMEM
before erroring out.
Cc: stable@vger.kernel.org
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200058.1883506-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2939deac1fa220bc82b89235f146df1d9b52e876 upstream.
Use ww_acquire_fini() in the error code paths. Otherwise lockdep
thinks that lock is held when lock's memory is freed after the
drm_gem_lock_reservations() error. The ww_acquire_context needs to be
annotated as "released", which fixes the noisy "WARNING: held lock freed!"
splat of VirtIO-GPU driver with CONFIG_DEBUG_MUTEXES=y and enabled lockdep.
Cc: stable@vger.kernel.org
Fixes: 7edc3e3b975b5 ("drm: Add helpers for locking an array of BO reservations.")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200405.1883897-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71af91565052214ad86f288e0d8ffb165f790995 upstream.
The 12/24hr flag in the RX-8035 can be found in the hour register,
instead of the CTRL1 on the RX-8025. This was overlooked when
support for the RX-8035 was added, and was causing read errors when
the hour register 'overflowed'.
To deal with the relevant register not always being visible in
the relevant functions, determine the 12/24 mode at startup and
store it in the driver state.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: f120e2e33ac8 ("rtc: rx8025: implement RX-8035 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220706074236.24011-1-matt@traverse.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9019b4f6d9bd88524ecd95420cf9cd4aaed7a125 upstream.
When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various
configs were updated, but the wireguard config was forgotten about. This
leads to unbootable test kernels, causing CI fails. Add
CONFIG_NONPORTABLE=y to the wireguard test suite configuration for
riscv32.
Fixes: 44c1e84a38a0 ("RISC-V: Add CONFIG_{NON,}PORTABLE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 133a6d1fe7d7ad8393af025c4dde379c0616661f upstream.
Currently, riscv_pmu_event_set_period updates the userpage mapping.
However, the caller of riscv_pmu_event_set_period should update
the userpage mapping because the counter can not be updated/started
from set_period function in counter overflow path.
Invoke the perf_event_update_userpage at the caller so that it
doesn't get invoked twice during counter start path.
Fixes: f5bfa23f576f ("RISC-V: Add a perf core library for pmu drivers")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0209b5830bea42dd3ce33ab0397231e67ec3b751 upstream.
Some of the SBI PMU calls does not pass 64bit arguments
correctly and not under RV32 compile time flags. Currently,
this doesn't create any incorrect results as RV64 ignores
any value in the additional register and qemu doesn't support
raw events.
Fix those SBI calls in order to set correct values for RV32.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9293ad46d8ba9909187a37b7215324420ad4596 upstream.
Modules always live before the kernel, MODULES_END is fixed but
MODULES_VADDR isn't fixed, it depends on the kernel size.
Let's add it to virtual kernel memory layout dump.
As MODULES is only defined for CONFIG_64BIT, so we dump it when
CONFIG_64BIT=y.
eg,
MODULES_VADDR - MODULES_END
0xffffffff01133000 - 0xffffffff80000000
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220811074150.3020189-5-xianting.tian@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6d2128e56a50a0d497c8e41ca1d33d88bcc0aa upstream.
The cpu_ops_spinwait is used in a couple of places in arch/riscv
and is causing a sparse warning due to no declaration. Add this
to <asm/cpu_ops.h> with the others to fix the following:
arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220714071811.187491-1-ben.dooks@sifive.com
[Palmer: Drop the extern from cpu_ops.c]
Fixes: 2ffc48fc7071 ("RISC-V: Move spinwait booting method to its own config")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4aa991c05aedc3ead92d1352af86db74090dc3c upstream.
Running sparse shows cpu_ops_spinwait.c is missing two definitions
found in head.h, so include it to stop the following warnings:
arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220713215306.94675-1-ben.dooks@sifive.com
Fixes: c78f94f35cf6 ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a208acf0eac857dc8cdaddd63a4e18ed03f91786 upstream.
The PLIC integrated on the Vic_U7_Core integrated on the StarFive
JH7100 SoC actually supports 133 external interrupts. 127 of these
are exposed to the outside world; the remainder are used by other
devices that are part of the core-complex such as the L2 cache
controller. But all 133 interrupts are external interrupts as far
as the PLIC is concerned. Fix the property so that the driver can
manage these additional interrupts, which is important since the
interrupts for the L2 cache controller are enabled by default.
Fixes: ec85362fb121 ("RISC-V: Add initial StarFive JH7100 device tree")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220707185529.19509-1-kettenis@openbsd.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b60cf8e59e61133b6c9514ff8d8c8d7049d040ef upstream.
Fix device tree schema validation error messages for the SiFive
Unmatched: ' cache-sets:0:0: 1024 was expected'.
The existing bindings allow for just 1024 cache-sets but the fu740 on
Unmatched the has 2048 cache-sets. The ISA itself permits any arbitrary
power of two, however this is not supported by dt-schema. The RTL for
the IP, to which the number of cache-sets is a tunable parameter, has
been released publicly so speculatively adding a small number of
"reasonable" values seems unwise also.
Instead, as the binding only supports two distinct controllers: add 2048
and explicitly lock it to the fu740's l2 cache while limiting 1024 to
the l2 cache on the fu540.
Fixes: af951c3a113b ("dt-bindings: riscv: Update l2 cache DT documentation to add support for SiFive FU740")
Reported-by: Atul Khare <atulkhare@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220803185359.942928-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c08b4848f596fd95543197463b5162bd7bab2442 upstream.
Since commit 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
and commit ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code"),
if __clear_user and __copy_user return from an fixup branch,
CSR_STATUS SR_SUM bit will be set, it is a vulnerability, so that
S-mode memory accesses to pages that are accessible by U-mode will success.
Disable S-mode access to U-mode memory should clear SR_SUM bit.
Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Fixes: ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code")
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20220615014714.1650349-1-chenlifu@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dbe5829408bc1586f75b4667ef60e5aab0209c7 upstream.
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6431e92fc827bdd2d28f79150d90415ba9ce0d21 upstream.
For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.
This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf59f34d7f978d14d6520fd80a78a5ad5cb8abf8 upstream.
The function ioremap() in lba_driver_probe() can fail, so
its return value should be checked.
Fixes: 4bdc0d676a643 ("remove ioremap_nocache and devm_ioremap_nocache")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab56b51ec0e69128909cef4650e1907248d821b upstream.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd524b7f317de8d31d638cbfdc7be4cf9b770e42 upstream.
Some code paths cannot guarantee the inode have any dentry alias. So
WARN_ON() all !dentry may flood the kernel logs.
For example, when an overlayfs inode is watched by inotifywait (1), and
someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD,
at that time if the dentry has been reclaimed by kernel (such as
echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The
printed call stack would be like:
? show_mark_fhandle+0xf0/0xf0
show_mark_fhandle+0x4a/0xf0
? show_mark_fhandle+0xf0/0xf0
? seq_vprintf+0x30/0x50
? seq_printf+0x53/0x70
? show_mark_fhandle+0xf0/0xf0
inotify_fdinfo+0x70/0x90
show_fdinfo.isra.4+0x53/0x70
seq_show+0x130/0x170
seq_read+0x153/0x440
vfs_read+0x94/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x59/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So let's drop WARN_ON() to avoid kernel log flooding.
Reported-by: Hongbo Yin <yinhongbo@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Tianci Zhang <zhangtianci.1997@bytedance.com>
Fixes: 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13dc15a3f5fd7f884e4bfa8c011a0ae868df12ae upstream.
For some sev ioctl interfaces, input may be passed that is less than or
equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP
firmware returns. In this case, kmalloc will allocate memory that is the
size of the input rather than the size of the data. Since PSP firmware
doesn't fully overwrite the buffer, the sev ioctl interfaces with the
issue may return uninitialized slab memory.
Currently, all of the ioctl interfaces in the ccp driver are safe, but
to prevent future problems, change all ioctl interfaces that allocate
memory with kmalloc to use kzalloc and memset the data buffer to zero
in sev_ioctl_do_platform_status.
Fixes: 38103671aad3 ("crypto: ccp: Use the stack and common buffer for status commands")
Fixes: e799035609e15 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Fixes: 76a2b524a4b1d ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Fixes: d6112ea0cb344 ("crypto: ccp - introduce SEV_GET_ID2 command")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: John Allen <john.allen@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3497fd009ef2c59eea60d21c3ac22de3585ed7d upstream.
Unlike other copying operations on ITER_PIPE, copy_mc_to_iter() can
result in a short copy. In that case we need to trim the unused
buffers, as well as the length of partially filled one - it's not
enough to set ->head, ->iov_offset and ->count to reflect how
much had we copied. Not hard to fix, fortunately...
I'd put a helper (pipe_discard_from(pipe, head)) into pipe_fs_i.h,
rather than iov_iter.c - it has nothing to do with iov_iter and
having it will allow us to avoid an ugly kludge in fs/splice.c.
We could put it into lib/iov_iter.c for now and move it later,
but I don't see the point going that way...
Cc: stable@kernel.org # 4.19+
Fixes: ca146f6f091e "lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()"
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b960c967f2aa01ab8f45c5a0bd78e754cffdeee upstream.
Commit 05b35e7eb9a1 ("smsc95xx: add phylib support") amended
smsc95xx_resume() to call phy_init_hw(). That function waits for the
device to runtime resume even though it is placed in the runtime resume
path, causing a deadlock.
The problem is that phy_init_hw() calls down to smsc95xx_mdiobus_read(),
which never uses the _nopm variant of usbnet_read_cmd().
Commit b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with
reset operation") causes a similar deadlock on resume if the device was
already runtime suspended when entering system sleep:
That's because the commit introduced smsc95xx_reset_resume(), which
calls down to smsc95xx_reset(), which neglects to use _nopm accessors.
Fix by auto-detecting whether a device access is performed by the
suspend/resume task_struct and use the _nopm variant if so. This works
because the PM core guarantees that suspend/resume callbacks are run in
task context.
Stacktrace for posterity:
INFO: task kworker/2:1:49 blocked for more than 122 seconds.
Workqueue: usb_hub_wq hub_event
schedule
rpm_resume
__pm_runtime_resume
usb_autopm_get_interface
usbnet_read_cmd
__smsc95xx_read_reg
__smsc95xx_phy_wait_not_busy
__smsc95xx_mdio_read
smsc95xx_mdiobus_read
__mdiobus_read
mdiobus_read
smsc_phy_reset
phy_init_hw
smsc95xx_resume
usb_resume_interface
usb_resume_both
usb_runtime_resume
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
hub_event
process_one_work
Fixes: b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.16+
Cc: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
