Murali Karicheri 209636b678 ARM: dts: keystone: add support for k2 Edison SoC and EVM ...

Keystone2 Edison (K2E) is a Quad Cortex A15 based SoC with
1 DSP. It has standard peripherals such as i2c, spi, uart, timer,
pcie, etc similar to k2hk, but without wireless hardwares. This
patch add support for k2 Edison SoC and EVM. This re-uses the common
keystone.dtsi to include common bindings across the various k2
devices.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

2014-02-26 10:06:56 -05:00

..

include

kbuild: create an "include chroot" for DT bindings

2013-04-05 12:22:32 -06:00

testcases

of/irq: Fix bug in interrupt parsing refactor.

2013-11-03 23:16:35 +00:00

aks-cdu.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

am33xx-clocks.dtsi

ARM: dts: am33xx clock data

2014-01-17 12:36:35 -08:00

am33xx.dtsi

ARM: dts: am33xx clock data

2014-01-17 12:36:35 -08:00

am35xx-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

am43x-epos-evm.dts

ARM: dts: AM4372: Update Support for EPOS EVM

2013-10-20 19:16:55 +02:00

am43xx-clocks.dtsi

ARM: dts: am43xx clock data

2014-01-17 12:36:52 -08:00

am335x-base0033.dts

ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support

2013-11-26 15:03:38 -08:00

am335x-bone-common.dtsi

ARM: dts: am335x-bone-common: correct mux mode for cmd line

2013-10-11 21:06:38 +02:00

am335x-bone.dts

ARM: dts: AM33XX: Add AES data and documentation

2013-10-11 21:06:40 +02:00

am335x-boneblack.dts

ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display

2013-10-11 21:06:42 +02:00

am335x-evm.dts

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-11-15 16:43:53 -08:00

am335x-evmsk.dts

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-11-15 16:43:53 -08:00

am335x-igep0033.dtsi

ARM: dts: AM33XX IGEP0033: add USB support

2013-11-26 15:03:39 -08:00

am335x-nano.dts

ARM: dts: Add support for Newflow NanoBone board

2013-10-22 14:56:33 +02:00

am3517_mt_ventoux.dts

ARM: dts: AM3XXX: Use #include for all device trees

2013-06-18 18:53:41 -05:00

am3517-evm.dts

ARM: dts: Add basic devices on am3517-evm

2013-12-08 14:15:46 -08:00

am3517.dtsi

ARM: dts: AM35xx: use DT clock data

2014-01-17 12:36:49 -08:00

am4372.dtsi

ARM: dts: am43xx clock data

2014-01-17 12:36:52 -08:00

animeo_ip.dts

ARM: at91: Animeo IP: fix mtd partition table

2013-12-09 11:10:13 +01:00

armada-370-db.dts

ARM: mvebu: re-enable PCIe on Armada 370 DB

2013-11-25 18:24:36 +00:00

armada-370-mirabox.dts

ARM: mvebu: Enable NAND controller in Armada 370 Mirabox

2013-11-24 03:40:19 +00:00

armada-370-netgear-rn102.dts

ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file

2013-12-20 03:13:56 +00:00

armada-370-netgear-rn104.dts

ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file

2013-12-20 03:13:57 +00:00

armada-370-rd.dts

ARM: mvebu: Enable NAND controller in A370 Reference Design board

2013-12-12 14:04:34 +00:00

armada-370-xp.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

armada-370.dtsi

ARM: mvebu: sort DT nodes by address

2013-12-12 15:00:44 +00:00

armada-xp-axpwifiap.dts

ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding

2013-08-07 20:05:05 +00:00

armada-xp-db.dts

ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes

2013-08-06 14:11:27 +00:00

armada-xp-gp.dts

ARM: mvebu: Enable NAND controller in Armada XP GP board

2013-11-24 03:40:19 +00:00

armada-xp-matrix.dts

arm: mvebu: add support for the Armada XP Matrix board

2013-10-03 15:13:01 +00:00

armada-xp-mv78230.dtsi

ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

2013-11-23 15:29:06 +00:00

armada-xp-mv78260.dtsi

ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260

2013-11-23 15:31:07 +00:00

armada-xp-mv78460.dtsi

ARM: mvebu: link PCIe controllers to the MSI controller

2013-09-30 15:00:27 +00:00

armada-xp-netgear-rn2120.dts

ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file

2013-12-20 03:13:57 +00:00

armada-xp-openblocks-ax3-4.dts

ARM: mvebu: dts: remove unneeded linux,default-state from led nodes

2013-11-23 17:34:40 +00:00

armada-xp.dtsi

ARM: mvebu: fix register length for Armada XP PMSU

2013-12-25 01:56:06 +00:00

armv7-m.dtsi

ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs

2013-12-16 17:51:34 +01:00

at91-ariag25.dts

ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled

2013-05-31 16:42:27 +02:00

at91-cosino_mega2560.dts

ARM: at91: add support for Cosino board series by HCE Engineering

2013-12-09 11:10:11 +01:00

at91-cosino.dtsi

ARM: at91: add support for Cosino board series by HCE Engineering

2013-12-09 11:10:11 +01:00

at91-foxg20.dts

ARM: at91: switch Fox G20 board .dts to pre-processor defines

2013-05-31 16:42:28 +02:00

at91-qil_a9260.dts

ARM: at91: switch Calao QIL-A9260 board to DT

2013-12-19 17:27:30 +01:00

at91rm9200_pqfp.dtsi

ARM: at91/dt: add at91rm9200 PQFP package version

2013-08-21 12:18:52 +02:00

at91rm9200.dtsi

ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions

2013-12-09 11:07:15 +01:00

at91rm9200ek.dts

ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order

2013-12-09 15:08:57 +01:00

at91sam9g15.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g15ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g20.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g20ek_2mmc.dts

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

at91sam9g20ek_common.dtsi

ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek

2013-10-18 16:50:13 +02:00

at91sam9g20ek.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

at91sam9g25.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9g25ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g35.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9g35ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g45.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

at91sam9m10g45ek.dts

ARM: at91: at91sam9m10g45ek: switch to PWM leds

2013-12-19 23:00:05 +01:00

at91sam9n12.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

at91sam9n12ek.dts

ARM: at91: add sound support on at91sam9n12ek board

2013-10-14 09:43:26 +02:00

at91sam9x5_macb0.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x5_macb1.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x5_usart3.dtsi

ARM: at91: add usart3 alias to dtsi

2013-12-02 14:14:53 +01:00

at91sam9x5.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

at91sam9x5cm.dtsi

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

at91sam9x5ek.dtsi

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

at91sam9x25.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x25ek.dts

Adding the DT support to USB gadget High-Speed aka usba.

2013-06-14 18:58:28 -07:00

at91sam9x35.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x35ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9260.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

at91sam9263.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

at91sam9263ek.dts

ARM: at91: sam9263ek: add dt lcd support

2013-12-09 11:10:10 +01:00

atlas6-evb.dts

ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board

2013-03-18 17:15:33 +01:00

atlas6.dtsi

ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6

2014-01-09 20:04:12 +08:00

bcm2835-rpi-b.dts

ARM: bcm2835: add USB controller to device tree

2014-01-02 12:08:03 -08:00

bcm2835.dtsi

ARM: bcm2835: add USB controller to device tree

2014-01-02 12:08:03 -08:00

bcm11351-brt.dts

ARM: dts: add usb udc support to bcm281xx

2013-12-23 00:14:11 -08:00

bcm11351.dtsi

ARM: SoC late changes for v3.14

2014-01-30 18:08:27 -08:00

bcm28155-ap.dts

ARM: dts: bcm28155-ap: Fix Card Detection GPIO

2014-01-31 15:11:22 -08:00

berlin2-sony-nsz-gs7.dts

ARM: add Armada 1500 and Sony NSZ-GS7 device tree files

2013-12-13 16:31:05 +01:00

berlin2.dtsi

ARM: add Armada 1500 and Sony NSZ-GS7 device tree files

2013-12-13 16:31:05 +01:00

berlin2cd-google-chromecast.dts

ARM: add Armada 1500-mini and Chromecast device tree files

2013-12-13 16:31:06 +01:00

berlin2cd.dtsi

ARM: add Armada 1500-mini and Chromecast device tree files

2013-12-13 16:31:06 +01:00

da850-enbw-cmc.dts

ARM: davinci: da850: Use #include for all device trees

2013-06-20 15:04:30 +05:30

da850-evm.dts

ARM: davinci: da850 evm: add GPIO pinumux entries DT node

2013-12-15 18:40:49 +05:30

da850.dtsi

ARM: davinci: da850: add GPIO DT node

2013-12-15 18:35:37 +05:30

dove-cm-a510.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove-cubox.dts

ARM: mvebu: dts: remove unneeded linux,default-state from led nodes

2013-11-23 17:34:40 +00:00

dove-d2plug.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove-d3plug.dts

ARM: dove: add initial DT file for Globalscale D3Plug

2013-09-30 15:00:54 +00:00

dove-dove-db.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

dra7-evm.dts

ARM: dts: dra7-evm: add smps123 supply for CPU

2013-10-22 17:33:17 +02:00

dra7.dtsi

ARM: dts: dra7 clock data

2014-01-17 12:36:04 -08:00

dra7xx-clocks.dtsi

ARM: dts: DRA7: Add PCIe related clock nodes

2014-01-17 12:36:31 -08:00

ea3250.dts

…

ecx-2000.dts

ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

2013-11-04 17:01:05 -06:00

ecx-common.dtsi

EDAC updates for 3.13

2013-11-18 14:50:17 -08:00

efm32gg-dk3750.dts

ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs

2013-12-16 17:51:34 +01:00

efm32gg.dtsi

ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs

2013-12-16 17:51:34 +01:00

elpida_ecb240abacn.dtsi

…

emev2-kzm9d.dts

ARM: shmobile: emev2: Use interrupt macros in DT files

2013-12-10 17:27:20 +09:00

emev2.dtsi

ARM: shmobile: emev2: Setup internal peripheral interrupts as level high

2013-12-10 17:27:21 +09:00

ethernut5.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

evk-pro3.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

exynos4.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

exynos4x12-pinctrl.dtsi

ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals

2013-08-06 02:49:43 +09:00

exynos4x12.dtsi

ARM: dts: Simplify MCT interrupt map for exynos4 SoCs

2013-12-21 08:24:38 +09:00

exynos5.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

exynos4210-origen.dts

ARM: dts: Update display clock frequency for Origen-4210

2013-12-16 04:41:56 +09:00

exynos4210-pinctrl.dtsi

ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes

2013-08-07 01:08:24 +09:00

exynos4210-smdkv310.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4210-trats.dts

ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards

2013-10-16 07:25:40 +09:00

exynos4210-universal_c210.dts

ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board

2013-10-16 07:25:41 +09:00

exynos4210.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

exynos4212.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

exynos4412-odroidx.dts

The first half of the clk framework pull request is made up almost

2014-01-23 18:56:08 -08:00

exynos4412-origen.dts

ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12

2013-12-21 08:01:23 +09:00

exynos4412-smdk4412.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4412-tiny4412.dts

ARM: dts: add support for EXYNOS4412 based TINY4412 board

2014-01-04 16:12:04 +09:00

exynos4412-trats2.dts

The first half of the clk framework pull request is made up almost

2014-01-23 18:56:08 -08:00

exynos4412.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

exynos5250-arndale.dts

ARM: dts: Disable I2C controllers by default on Exynos5250

2013-12-21 08:33:23 +09:00

exynos5250-cros-common.dtsi

The first half of the clk framework pull request is made up almost

2014-01-23 18:56:08 -08:00

exynos5250-pinctrl.dtsi

ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250

2013-10-16 07:23:42 +09:00

exynos5250-smdk5250.dts

ARM: dts: Disable I2C controllers by default on Exynos5250

2013-12-21 08:33:23 +09:00

exynos5250-snow.dts

ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix

2013-12-21 10:09:25 +09:00

exynos5250.dtsi

The first half of the clk framework pull request is made up almost

2014-01-23 18:56:08 -08:00

exynos5420-arndale-octa.dts

ARM: dts: Add initial support for Arndale Octa board

2014-01-04 16:11:21 +09:00

exynos5420-pinctrl.dtsi

ARM: dts: Fix a typo in exynos5420-pinctrl.dtsi

2013-12-12 06:58:37 +09:00

exynos5420-smdk5420.dts

ARM: dts: Add dwmmc DT nodes for exynos5420 SOC

2013-12-16 04:47:32 +09:00

exynos5420.dtsi

The first half of the clk framework pull request is made up almost

2014-01-23 18:56:08 -08:00

exynos5440-sd5v1.dts

ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards

2013-10-16 07:23:55 +09:00

exynos5440-ssdk5440.dts

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

exynos5440.dtsi

ARM: dts: Fix missing spaces after labels for exynos

2013-12-21 08:24:38 +09:00

ge863-pro3.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

hi3620-hi4511.dts

ARM: dts: rename hi4511 dts file

2013-12-20 08:23:01 -08:00

hi3620.dtsi

ARM: dts: enable clock binding on Hi3620

2013-12-17 16:43:35 -08:00

highbank.dts

ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

2013-11-04 17:01:05 -06:00

imx6dl-cubox-i.dts

ARM: imx: initial SolidRun Cubox-i support

2014-01-27 14:21:01 +00:00

imx6dl-hummingboard.dts

ARM: imx: initial SolidRun HummingBoard support

2014-01-27 14:18:09 +00:00

imx6dl-pinfunc.h

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-sabreauto.dts

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-sabresd.dts

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-wandboard.dts

ARM: dts: imx6: Add support for imx6q wandboard

2013-08-22 23:29:28 +08:00

imx6dl.dtsi

ARM: dts: imx: ocram size is different between imx6q and imx6dl

2013-08-22 23:29:44 +08:00

imx6q-arm2.dts

ARM: dts: imx6qdl/imx6sl: add the dma property for uart

2013-08-22 23:29:16 +08:00

imx6q-cubox-i.dts

ARM: imx: initial SolidRun Cubox-i support

2014-01-27 14:21:01 +00:00

imx6q-phytec-pbab01.dts

ARM: dts: Phytec imx6q pfla02 and pbab01 support

2013-06-17 16:04:31 +08:00

imx6q-phytec-pfla02.dtsi

ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module

2013-08-22 23:29:50 +08:00

imx6q-pinfunc.h

ARM: dts: imx6q: add quirky select input for USB_OTG_ID

2013-09-26 13:01:37 +08:00

imx6q-sabreauto.dts

ARM: dtsi: enable ahci sata on imx6q platforms

2013-08-22 23:29:25 +08:00

imx6q-sabrelite.dts

ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog

2013-09-29 15:37:33 +08:00

imx6q-sabresd.dts

ARM: dtsi: enable ahci sata on imx6q platforms

2013-08-22 23:29:25 +08:00

imx6q-sbc6x.dts

ARM: dts: MicroSys sbc6x support (i.MX6)

2013-04-09 22:53:37 +08:00

imx6q-udoo.dts

ARM: dts: imx6q-udoo: Add initial board support

2013-09-27 13:31:44 +08:00

imx6q-wandboard.dts

ARM: dts: imx6q-wandboard: Add sata support

2013-08-22 23:29:30 +08:00

imx6q.dtsi

ARM: dts: imx: ocram size is different between imx6q and imx6dl

2013-08-22 23:29:44 +08:00

imx6qdl-cubox-i.dtsi

ARM: imx: initial SolidRun Cubox-i support

2014-01-27 14:21:01 +00:00

imx6qdl-microsom-ar8035.dtsi

ARM: imx: initial SolidRun HummingBoard support

2014-01-27 14:18:09 +00:00

imx6qdl-microsom.dtsi

ARM: imx: initial SolidRun HummingBoard support

2014-01-27 14:18:09 +00:00

imx6qdl-sabreauto.dtsi

ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3

2013-09-26 13:01:35 +08:00

imx6qdl-sabresd.dtsi

ARM: dts: imx6qdl-sabresd: Add backlight support for lvds

2013-10-12 16:15:05 +08:00

imx6qdl-wandboard.dtsi

ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios

2013-09-29 15:37:46 +08:00

imx6qdl.dtsi

ARM: dts: imx6qdl: disable spdif "rxtx5" clock option

2013-11-18 09:21:29 +08:00

imx6sl-evk.dts

ARM: dts: imx6sl-evk: enable the SPI NOR

2013-10-18 16:27:45 +08:00

imx6sl-pinfunc.h

pinctrl: add pinctrl driver for imx6sl

2013-04-09 22:53:38 +08:00

imx6sl.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx23-evk.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23-olinuxino.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

imx23-stmp378x_devb.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23.dtsi

ARM: mxs: dts: Enable DCP for MXS

2014-01-05 20:49:56 +08:00

imx25-karo-tx25.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx25-pdk.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx25.dtsi

ARM: dts: imx25: Make lcdc compatible to imx21 fb

2013-08-22 23:29:15 +08:00

imx27-apf27.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx27-apf27dev.dts

ARM: imx27-apf27dev: Add framebuffer support

2013-10-08 14:36:41 +08:00

imx27-pdk.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx27-phytec-phycard-s-rdk.dts

ARM: dts: imx27 phyCARD-S, i2c ADC device node

2013-08-22 23:29:05 +08:00

imx27-phytec-phycard-s-som.dts

ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk

2013-08-22 23:29:03 +08:00

imx27-phytec-phycore-rdk.dts

ARM: dts: imx27-phytec-phycore-rdk: Add CAN node

2013-08-22 23:28:56 +08:00

imx27-phytec-phycore-som.dts

ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX

2013-08-22 23:29:57 +08:00

imx27.dtsi

ARM: imx27: add missing #pwm-cells property

2013-10-18 16:27:01 +08:00

imx28-apf28.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers

2013-09-26 13:01:36 +08:00

imx28-apf28dev.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-apx4devkit.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10036.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10037.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10049.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10055.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10056.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10057.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10058.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-evk.dts

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx28-m28cu3.dts

ARM: dts: mxs: Add MSR M28CU3 board

2013-10-05 10:16:33 +08:00

imx28-m28evk.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

imx28-sps1.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-tx28.dts

ARM: dts: tx28: restructure and update DTS file

2013-09-26 13:01:37 +08:00

imx28.dtsi

ARM: mxs: dts: Enable DCP for MXS

2014-01-05 20:49:56 +08:00

imx31-bug.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx31.dtsi

ARM: dts: imx: Add the missing cpus node

2013-08-22 23:29:01 +08:00

imx35-pinfunc.h

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx51-apf51.dts

ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template

2013-08-22 23:29:53 +08:00

imx51-apf51dev.dts

ARM: imx51-apf51dev: Add parallel display support

2013-10-08 14:36:33 +08:00

imx51-babbage.dts

ARM: dts: imx51-babbage: Make DVI and WVGA panel functional

2013-10-09 09:38:17 +08:00

imx51-pinfunc.h

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx51.dtsi

ARM: dts: i.MX51: Fix OTG PHY clock

2013-11-11 22:58:45 +08:00

imx53-ard.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-evk.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-m53evk.dts

ARM: mx5: Add support for DENX M53EVK

2013-06-17 16:04:16 +08:00

imx53-mba53.dts

ARM i.MX53: mba53: Fix PWM backlight DT node

2013-07-15 08:28:10 +08:00

imx53-pinfunc.h

ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

2013-04-09 22:53:37 +08:00

imx53-qsb.dts

ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source

2013-10-06 19:53:22 +08:00

imx53-smd.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-tqma53.dtsi

ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2

2013-06-17 16:04:26 +08:00

imx53-tx53.dtsi

ARM: dts: add Ka-Ro tx53 devicetree

2013-06-17 16:04:18 +08:00

imx53.dtsi

ARM: imx: add ocram clock for imx53

2013-08-22 23:29:46 +08:00

integrator.dtsi

ARM: integrator: move EBI to the device tree

2013-12-04 16:22:31 +01:00

integratorap.dts

ARM: integrator: core module registers from compatible strings

2013-10-16 14:10:14 +02:00

integratorcp.dts

ARM: integrator: pass parent IRQ to the SIC

2014-01-03 22:26:22 +01:00

k2e-clocks.dtsi

ARM: dts: keystone: add support for k2 Edison SoC and EVM

2014-02-26 10:06:56 -05:00

k2e-evm.dts

ARM: dts: keystone: add support for k2 Edison SoC and EVM

2014-02-26 10:06:56 -05:00

k2e.dtsi

ARM: dts: keystone: add support for k2 Edison SoC and EVM

2014-02-26 10:06:56 -05:00

k2hk-clocks.dtsi

ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs

2014-02-26 10:06:56 -05:00

k2hk-evm.dts

ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs

2014-02-26 10:06:56 -05:00

k2hk.dtsi

ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs

2014-02-26 10:06:56 -05:00

k2l-clocks.dtsi

ARM: dts: keystone: add support for K2 Lamarr SoC and EVM

2014-02-26 10:06:56 -05:00

k2l-evm.dts

ARM: dts: keystone: add support for K2 Lamarr SoC and EVM

2014-02-26 10:06:56 -05:00

k2l.dtsi

ARM: dts: keystone: add support for K2 Lamarr SoC and EVM

2014-02-26 10:06:56 -05:00

keystone-clocks.dtsi

ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs

2014-02-26 10:06:56 -05:00

keystone.dtsi

ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs

2014-02-26 10:06:56 -05:00

kirkwood-98dx4122.dtsi

…

kirkwood-6192.dtsi

ARM: Kirkwood: Add 6192 DTSI file

2013-12-25 02:03:36 +00:00

kirkwood-6281.dtsi

Phy: Add DT nodes on kirkwood and Dove for the SATA PHY

2013-12-22 17:19:36 +00:00

kirkwood-6282.dtsi

ARM: kirkwood: 6282: sort DT nodes by address

2013-12-22 17:20:00 +00:00

kirkwood-cloudbox.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-db-88f6281.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-db-88f6282.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-db.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-dns320.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-dns325.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-dnskw.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-dockstar.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-dreamplug.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-goflexnet.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-guruplug-server-plus.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-ib62x0.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-iconnect.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-iomega_ix2_200.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-is2.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-km_kirkwood.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-laplug.dts

ARM: Kirkwood: DT board setup for LaPlug

2013-12-25 02:03:52 +00:00

kirkwood-lschlv2.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-lsxhl.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-lsxl.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-mplcec4.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-mv88f6281gtw-ge.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-netgear_readynas_duo_v2.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-netgear_readynas_nv+_v2.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-ns2-common.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-ns2.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-ns2lite.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-ns2max.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-ns2mini.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-nsa310-common.dtsi

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-nsa310.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-nsa310a.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-openblocks_a6.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-openblocks_a7.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-sheevaplug-common.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-sheevaplug-esata.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-sheevaplug.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-topkick.dts

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kirkwood-ts219-6281.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-ts219-6282.dts

ARM: DT: Kirkwood: Use symbolic names from gpio.h

2013-12-08 01:00:54 +00:00

kirkwood-ts219.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

kizbox.dts

ARM: at91/dt: add watchdog properties to kizbox board

2014-01-28 21:33:38 +01:00

lpc32xx.dtsi

ARM: dts: lpc32xx: cpus/cpu nodes dts updates

2013-05-23 10:45:13 +01:00

Makefile

Merge branch 'cubox-i-init' into for-linus

2014-01-28 21:38:58 +00:00

marco-evb.dts

…

marco.dtsi

…

mmp2-brownstone.dts

…

mmp2.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

moxart-uc7112lx.dts

ARM: moxart: move fixed rate clock child node to board level dts

2014-01-23 18:13:44 -08:00

moxart.dtsi

ARM: moxart: move fixed rate clock child node to board level dts

2014-01-23 18:13:44 -08:00

mpa1600.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

mxs-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

nspire-classic.dtsi

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-clp.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-cx.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-tp.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire.dtsi

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

omap2.dtsi

ARM: dts: OMAP2: fix interrupt number for rng

2014-01-08 10:24:44 -08:00

omap3-beagle-xm.dts

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3-beagle.dts

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3-cm-t3x30.dtsi

ARM: dts: Add support for sbc-3xxx with cm-t3730

2013-12-18 13:13:21 -08:00

omap3-cm-t3730.dts

ARM: dts: Add support for sbc-3xxx with cm-t3730

2013-12-18 13:13:21 -08:00

omap3-devkit8000.dts

ARM: dts: omap3-devkit8000: fix a typo in GMPC node

2013-10-11 21:06:33 +02:00

omap3-evm-37xx.dts

ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)

2013-10-14 11:34:37 -07:00

omap3-evm-common.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

omap3-evm.dts

ARM: dts: Add common support for omap3-evm

2013-10-14 11:34:37 -07:00

omap3-gta04.dts

ARM: dts: omap3: Adapt USB OTG to generic PHY framework

2013-10-20 19:16:08 +02:00

omap3-igep0020.dts

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3-igep0030.dts

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3-igep.dtsi

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3-ldp.dts

ARM: dts: Add basic support for omap3 LDP zoom1 labrador

2013-11-25 15:15:39 -08:00

omap3-n9.dts

ARM: dts: add minimal DT support for Nokia N950 & N9 phones

2013-10-18 10:24:33 -07:00

omap3-n900.dts

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap3-n950-n9.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap3-n950.dts

ARM: dts: add minimal DT support for Nokia N950 & N9 phones

2013-10-18 10:24:33 -07:00

omap3-overo.dtsi

ARM: dts: omap: update usb_otg_hs data

2013-09-27 17:36:58 -07:00

omap3-sb-t35.dtsi

ARM: dts: Add support for sbc-3xxx with cm-t3730

2013-12-18 13:13:21 -08:00

omap3-sbc-t3730.dts

ARM: dts: Add support for sbc-3xxx with cm-t3730

2013-12-18 13:13:21 -08:00

omap3-tobi.dts

ARM: dts: omap3-tobi: Correct polarity for GPIO LED

2013-06-19 04:38:14 -05:00

omap3-zoom3.dts

ARM: dts: Split omap3 pinmux core device

2014-01-07 14:01:39 -08:00

omap3.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap3xxx-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap4-cpu-thermal.dtsi

arm: dts: add omap4 CPU thermal data

2013-12-04 09:34:25 -04:00

omap4-panda-a4.dts

ARM: dts: OMAP2+: Use pinctrl constants

2013-06-18 18:53:40 -05:00

omap4-panda-common.dtsi

ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

2013-12-02 11:38:13 -08:00

omap4-panda-es.dts

ARM: dts: omap4-panda-es: Do not reset gpio1

2013-10-20 19:16:53 +02:00

omap4-panda.dts

ARM: dts: OMAP2+: Use #include for all device trees

2013-06-18 18:53:38 -05:00

omap4-sdp-es23plus.dts

ARM: dts: OMAP2+: Use pinctrl constants

2013-06-18 18:53:40 -05:00

omap4-sdp.dts

ARM: dts: omap4-sdp: Fix pin muxing for wl12xx

2013-12-02 11:38:14 -08:00

omap4-var-som.dts

ARM: dts: OMAP4/5: Use existing constants for IRQs

2013-06-18 18:53:39 -05:00

omap4.dtsi

ARM: dts: omap4 clock data

2014-01-17 12:35:57 -08:00

omap5-core-thermal.dtsi

arm: dts: add omap5 CORE thermal data

2013-12-04 09:34:26 -04:00

omap5-gpu-thermal.dtsi

arm: dts: add omap5 GPU thermal data

2013-12-04 09:34:26 -04:00

omap5-uevm.dts

ARM: dts: omap5-uevm: Remove pinmux for dmic pins

2013-10-23 11:40:47 +02:00

omap5.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap34xx-hs.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap34xx-omap36xx-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap34xx.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap36xx-am35xx-omap3430es2plus-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap36xx-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap36xx-hs.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap36xx-omap3430es2plus-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap36xx.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap44xx-clocks.dtsi

ARM: dts: omap4 clock data

2014-01-17 12:35:57 -08:00

omap54xx-clocks.dtsi

ARM: dts: omap5 clock data

2014-01-17 12:36:01 -08:00

omap443x-clocks.dtsi

ARM: dts: omap4 clock data

2014-01-17 12:35:57 -08:00

omap443x.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap446x-clocks.dtsi

ARM: dts: omap4 clock data

2014-01-17 12:35:57 -08:00

omap2420-h4.dts

ARM: dts: Remove '0x's from OMAP2420 H4 DTS file

2013-10-08 17:51:40 +02:00

omap2420-n8x0-common.dtsi

ARM: OMAP2+: dts: add n8x0 onenand

2013-11-25 15:38:09 -08:00

omap2420-n800.dts

ARM: dts: Add basic Nokia N8X0 support

2013-11-25 15:15:24 -08:00

omap2420-n810-wimax.dts

ARM: dts: Add basic Nokia N8X0 support

2013-11-25 15:15:24 -08:00

omap2420-n810.dts

ARM: dts: Add basic Nokia N8X0 support

2013-11-25 15:15:24 -08:00

omap2420.dtsi

ARM: dts: Fix omap2 specific dtsi files by adding the missing entries

2013-11-15 14:35:29 -08:00

omap2430-sdp.dts

ARM: dts: Add basic device tree support for omap2430 sdp

2013-11-25 15:15:23 -08:00

omap2430.dtsi

ARM: dts: Fix omap2 specific dtsi files by adding the missing entries

2013-11-15 14:35:29 -08:00

omap3430-sdp.dts

ARM: dts: Remove '0x's from OMAP3430 SDP DTS file

2013-10-08 17:51:41 +02:00

omap3430es1-clocks.dtsi

ARM: dts: omap3 clock data

2014-01-17 12:36:41 -08:00

omap4460.dtsi

The second half of the clock framework pull requeust for 3.14 is

2014-01-28 18:44:53 -08:00

omap-gpmc-smsc911x.dtsi

ARM: dts: Fix the name of supplies for smsc911x shared by OMAP

2013-12-02 11:38:15 -08:00

omap-zoom-common.dtsi

ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x

2013-11-15 14:33:26 -08:00

orion5x-lacie-ethernet-disk-mini-v2.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

orion5x.dtsi

DeviceTree updates for 3.14:

2014-01-24 17:27:34 -08:00

phy3250.dts

…

picoxcell-pc3x2.dtsi

ARM: dts: picoxcell: cpus/cpu nodes dts updates

2013-05-23 10:45:15 +01:00

picoxcell-pc3x3.dtsi

ARM: dts: picoxcell: cpus/cpu nodes dts updates

2013-05-23 10:45:15 +01:00

picoxcell-pc7302-pc3x2.dts

…

picoxcell-pc7302-pc3x3.dts

…

pm9g45.dts

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

prima2-evb.dts

…

prima2.dtsi

ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync

2014-01-09 20:05:31 +08:00

pxa2xx.dtsi

ARM: dts: pxa2xx: cpus/cpu nodes dts updates

2013-05-23 10:45:17 +01:00

pxa3xx.dtsi

ARM: pxa: DTS: override gpio node in pxa3xx.dtsi

2013-08-13 15:51:02 -07:00

pxa27x.dtsi

ARM: pxa: add PWM nodes to pxa27x.dtsi

2013-12-11 16:36:47 -08:00

pxa168-aspenite.dts

…

pxa168.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

pxa910-dkb.dts

…

pxa910.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

qcom-apq8074-dragonboard.dts

ARM: msm: Add support for APQ8074 Dragonboard

2014-01-02 11:24:44 -08:00

qcom-msm8660-surf.dts

ARM: dts: msm: Add clock controller nodes and hook into uart

2014-01-31 14:58:51 -08:00

qcom-msm8960-cdp.dts

ARM: dts: msm: Add clock controller nodes and hook into uart

2014-01-31 14:58:51 -08:00

qcom-msm8974.dtsi

ARM: dts: msm: Add clock controller nodes and hook into uart

2014-01-31 14:58:51 -08:00

r7s72100-genmai-reference.dts

ARM: shmobile: r7s72100 Genmai DT reference DTS bits

2013-12-10 17:24:23 +09:00

r7s72100-genmai.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

r7s72100.dtsi

ARM: shmobile: Initial r7s72100 SoC support

2013-10-08 09:53:00 +09:00

r8a73a4-ape6evm-reference.dts

ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref

2013-12-10 17:27:17 +09:00

r8a73a4-ape6evm.dts

ARM: shmobile: Include all 2 GiB of memory on APE6EVM

2013-12-10 17:27:17 +09:00

r8a73a4.dtsi

ARM: shmobile: r8a73a4: Specify PFC interrupts in DT

2013-12-19 20:01:32 +09:00

r8a7740-armadillo800eva-reference.dts

ARM: shmobile: armadillo: dts: Add gpio-keys device

2013-12-19 20:01:33 +09:00

r8a7740-armadillo800eva.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

r8a7740.dtsi

ARM: shmobile: r8a7740: Specify PFC interrupts in DT

2013-12-19 20:01:32 +09:00

r8a7778-bockw-reference.dts

ARM: shmobile: bockw-reference: Use falling edge IRQ for LAN9221

2013-12-10 17:27:08 +09:00

r8a7778-bockw.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

r8a7778.dtsi

ARM: shmobile: Use r8a7778 suffix for INTC compat string

2013-12-10 17:27:23 +09:00

r8a7779-marzen-reference.dts

ARM: shmobile: marzen: enable HSPI0 in DTS

2013-12-10 17:27:25 +09:00

r8a7779-marzen.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

r8a7779.dtsi

ARM: shmobile: r8a7779: add HSPI support to DTSI

2013-12-10 17:27:24 +09:00

r8a7790-lager.dts

ARM: shmobile: lager: Specify external clock frequency in DT

2013-12-19 20:01:34 +09:00

r8a7790.dtsi

Second Round of Renesas ARM Based SoC DT Fixes for v3.14

2014-01-31 15:08:10 -08:00

r8a7791-koelsch-reference.dts

ARM: shmobile: koelsch: dts: Add gpio-keys device

2013-12-12 22:22:04 +09:00

r8a7791-koelsch.dts

ARM: shmobile: koelsch: Specify external clock frequency in DT

2013-12-19 20:01:34 +09:00

r8a7791.dtsi

Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"

2013-12-26 14:16:54 +09:00

rk3xxx.dtsi

ARM: rockchip: enable arm-global-timer

2013-10-14 23:03:23 +02:00

rk3066a-bqcurie2.dts

ARM: rockchip: add dts for bqcurie2 tablet

2013-10-14 23:03:46 +02:00

rk3066a-clocks.dtsi

arm: Add basic clocks for Rockchip rk3066a SoCs

2013-06-21 09:20:56 +02:00

rk3066a.dtsi

ARM: SoC board updates for 3.13

2013-11-11 16:57:16 +09:00

rk3188-clocks.dtsi

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

rk3188-radxarock.dts

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

rk3188.dtsi

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

s3c24xx.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c64xx-pinctrl.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c64xx.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c2416-pinctrl.dtsi

ARM: dts: add devicetree support for s3c2416-smdk2416

2013-05-21 01:06:12 +09:00

s3c2416-smdk2416.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c2416.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c6400.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c6410-mini6410.dts

ARM: dts: Add dts file for S3C6410-based Mini6410 board

2013-09-17 06:48:29 +09:00

s3c6410-smdk6410.dts

ARM: dts: Add dts file for S3C6410-based SMDK6410 board

2013-09-17 06:48:29 +09:00

s3c6410.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

sama5d3_can.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_emac.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_gmac.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_lcd.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_mci2.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_tcb1.dtsi

ARM: at91/dt: define sama5d3 clocks

2013-12-02 15:31:28 +01:00

sama5d3_uart.dtsi

ARM: at91: add uart aliases to sama5d3 dtsi

2013-12-09 11:10:14 +01:00

sama5d3.dtsi

ARM: at91/dt: add sam9 watchdog default options to SoCs

2014-01-28 21:33:14 +01:00

sama5d3xcm.dtsi

ARM: at91/dt: remove old clk material

2013-12-02 15:31:29 +01:00

sama5d3xdm.dtsi

ARM: at91: sama5d3: enable qt1070 as a wakeup source

2013-12-09 11:10:12 +01:00

sama5d3xmb.dtsi

ARM: at91/dt: fix phy address in sama5xmb to match the reg property

2013-08-29 15:21:45 -04:00

sama5d31.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d31ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d33.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d33ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d34.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d34ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d35.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d35ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d36.dtsi

ARM: at91: sama5d3/dt: add sama5d36ek dts files

2013-12-10 09:59:57 -08:00

sama5d36ek.dts

ARM: at91: sama5d3/dt: add sama5d36ek dts files

2013-12-10 09:59:57 -08:00

samsung_k3pe0e000b.dtsi

…

sh73a0-kzm9g-reference.dts

ARM: shmobile: kzm9g: add FSI support for DTS

2013-12-12 21:07:37 +09:00

sh73a0-kzm9g.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

sh73a0.dtsi

ARM: shmobile: sh73a0: Specify PFC interrupts in DT

2013-12-19 20:01:32 +09:00

sh7372-mackerel.dts

ARM: shmobile: Use #include in device tree sources

2013-12-10 17:27:06 +09:00

sh7372.dtsi

ARM: shmobile: sh7372: Add pin control device to device tree

2013-07-22 10:12:36 +09:00

skeleton64.dtsi

ARM: dts: Fix memory node in skeleton64.dtsi

2013-08-07 16:33:50 +00:00

skeleton.dtsi

…

socfpga_arria5_socdk.dts

dts: socfpga: Add support for Altera's SOCFPGA Arria V board

2013-10-09 16:58:31 -05:00

socfpga_arria5.dtsi

dts: socfpga: Add support for Altera's SOCFPGA Arria V board

2013-10-09 16:58:31 -05:00

socfpga_cyclone5_socdk.dts

ARM: socfpga: dts: Move common nodes to cyclone5 dtsi

2013-10-09 16:56:24 -05:00

socfpga_cyclone5_sockit.dts

ARM: socfpga: dts: Add support for terasic SoCkit

2013-10-09 16:57:08 -05:00

socfpga_cyclone5.dtsi

ARM: socfpga: dts: Move common nodes to cyclone5 dtsi

2013-10-09 16:56:24 -05:00

socfpga_vt.dts

ARM: socfpga: dts: Add ethernet bindings for SOCFPGA

2013-06-11 16:34:57 -07:00

socfpga.dtsi

ARM: dts: socfpga: add pl330 clock

2014-01-08 12:04:03 -06:00

spear3xx.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear13xx.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear300-evb.dts

…

spear300.dtsi

…

spear310-evb.dts

…

spear310.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear320-evb.dts

…

spear320-hmi.dts

…

spear320.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear600-evb.dts

…

spear600.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear1310-evb.dts

…

spear1310.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear1340-evb.dts

…

spear1340.dtsi

ARM: arm-soc: late cleanups

2013-05-07 11:22:14 -07:00

st-pincfg.h

ARM: STi: OF: Fix a typo in pincfg header

2013-12-04 08:58:39 +00:00

ste-ccu8540-pinctrl.dtsi

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-ccu8540.dts

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-ccu9540.dts

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-dbx5x0.dtsi

ARM: ux500: create MCDE node to collect resources

2013-11-26 21:01:55 +01:00

ste-href-family-pinctrl.dtsi

ARM: ux500: move the WLAN GPIO pin setup to the device tree

2013-11-26 21:01:56 +01:00

ste-href-stuib.dtsi

ARM: ux500: move GPIO key configuration to device tree

2013-11-26 21:01:56 +01:00

ste-href-tvk1281618.dtsi

ARM: ux500: move GPIO key configuration to device tree

2013-11-26 21:01:56 +01:00

ste-href.dtsi

ARM: ux500: Refactor common DT configs for sdi[n] devices

2013-12-13 10:25:37 +01:00

ste-hrefprev60-stuib.dts

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-hrefprev60-tvk.dts

ARM: ux500: split the HREF DTS files from two to four

2013-10-02 16:17:04 +02:00

ste-hrefprev60.dtsi

ARM: ux500: Configure regulator for I/O voltage for SD-card slot

2013-12-13 10:27:58 +01:00

ste-hrefv60plus-stuib.dts

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-hrefv60plus-tvk.dts

ARM: ux500: split the HREF DTS files from two to four

2013-10-02 16:17:04 +02:00

ste-hrefv60plus.dtsi

ARM: ux500: Configure regulator for I/O voltage for SD-card slot

2013-12-13 10:27:58 +01:00

ste-nomadik-pinctrl.dtsi

ARM: ux500: move GPIO key configuration to device tree

2013-11-26 21:01:56 +01:00

ste-nomadik-s8815.dts

ARM: nomadik: get rid of explicit ethernet GPIO management

2013-11-28 21:08:42 +01:00

ste-nomadik-stn8815.dtsi

ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file

2013-11-28 21:08:42 +01:00

ste-snowball.dts

ARM: ux500: Configure regulator for I/O voltage for SD-card slot

2013-12-13 10:27:58 +01:00

ste-u300.dts

ARM: u300: Remove '0x's from U300 DTS file

2013-11-26 21:00:21 +01:00

stih41x-b2000.dtsi

ARM: STi: Add I2C config to B2000 and B2020 boards

2013-12-04 09:00:31 +00:00

stih41x-b2020.dtsi

ARM: STi: Add I2C config to B2000 and B2020 boards

2013-12-04 09:00:31 +00:00

stih41x.dtsi

ARM: STi: Fix cpu nodes with correct device_type.

2013-08-04 13:40:48 -07:00

stih415-b2000.dts

ARM: stih41x: Add B2000 board support

2013-06-25 13:42:50 -07:00

stih415-b2020.dts

ARM: stih41x: Add B2020 board support

2013-06-25 13:42:51 -07:00

stih415-clock.dtsi

ARM: sti: Add STiH415 SOC support

2013-06-25 13:26:47 -07:00

stih415-pinctrl.dtsi

ARM: STi: Supply I2C configuration to STiH415 SoC

2013-12-04 09:00:18 +00:00

stih415.dtsi

ARM: STi: Supply I2C configuration to STiH415 SoC

2013-12-04 09:00:18 +00:00

stih416-b2000.dts

ARM: stih41x: Add B2000 board support

2013-06-25 13:42:50 -07:00

stih416-b2020.dts

ARM: stih41x: Add B2020 board support

2013-06-25 13:42:51 -07:00

stih416-clock.dtsi

ARM: sti: Add STiH416 SOC support

2013-06-25 13:26:58 -07:00

stih416-pinctrl.dtsi

ARM: STi: Supply I2C configuration to STiH416 SoC

2013-12-04 08:59:55 +00:00

stih416.dtsi

ARM: STi: Supply I2C configuration to STiH416 SoC

2013-12-04 08:59:55 +00:00

sun4i-a10-a1000.dts

ARM: sun4i: dt: Move the aliases to the DTSI

2013-12-29 23:03:16 +01:00

sun4i-a10-cubieboard.dts

ARM: sun4i: dt: Remove chosen nodes

2013-12-29 23:03:18 +01:00

sun4i-a10-hackberry.dts

ARM: sun4i: dt: Remove chosen nodes

2013-12-29 23:03:18 +01:00

sun4i-a10-mini-xplus.dts

ARM: sun4i: dt: Remove chosen nodes

2013-12-29 23:03:18 +01:00

sun4i-a10.dtsi

ARM: dts: sun4i: Add rtp controller node

2014-01-01 23:49:31 +01:00

sun5i-a10s-olinuxino-micro.dts

ARM: sun5i: dt: Fix A10s SoC bus base address

2013-08-10 19:13:44 +02:00

sun5i-a10s.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

sun5i-a13-olinuxino-micro.dts

ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board

2013-12-16 11:51:17 +01:00

sun5i-a13-olinuxino.dts

ARM: sun4i: dt: Remove chosen nodes

2013-12-29 23:03:18 +01:00

sun5i-a13.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

sun6i-a31-colombus.dts

ARM: sun6i: colombus: Add uart0 muxing

2013-08-22 00:19:17 +02:00

sun6i-a31.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

sun7i-a20-cubieboard2.dts

ARM: sun7i: cubieboard2: Enable the I2C controllers

2013-09-18 11:35:38 -05:00

sun7i-a20-cubietruck.dts

arm: sun7i: cubietruck: Enable the i2c controllers

2014-01-07 23:39:19 +01:00

sun7i-a20-olinuxino-micro.dts

ARM: sun7i: olinuxino-micro: Enable the I2C controllers

2013-09-18 11:35:38 -05:00

sun7i-a20.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

tegra20-colibri-512.dtsi

ARM: SoC DT updates for 3.14

2014-01-23 18:45:38 -08:00

tegra20-harmony.dts

ARM: tegra: Enable LVDS on Harmony

2013-12-19 13:07:37 -07:00

tegra20-iris-512.dts

ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines

2013-12-16 14:09:20 -07:00

tegra20-medcom-wide.dts

ARM: tegra: add missing unit addresses to DT

2013-12-16 14:09:16 -07:00

tegra20-paz00.dts

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20-plutux.dts

ARM: tegra: add missing unit addresses to DT

2013-12-16 14:09:16 -07:00

tegra20-seaboard.dts

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20-tamonten.dtsi

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20-tec.dts

ARM: tegra: add missing unit addresses to DT

2013-12-16 14:09:16 -07:00

tegra20-trimslice.dts

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20-ventana.dts

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20-whistler.dts

ARM: tegra: set up /aliases entries for RTCs

2013-12-18 14:10:48 -07:00

tegra20.dtsi

ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines

2013-12-16 14:09:20 -07:00

tegra30-beaver.dts

ARM: tegra: enable USB2 on Tegra30 Beaver

2013-12-20 09:48:57 -07:00

tegra30-cardhu-a02.dts

ARM: tegra: fix node sort order

2013-12-16 14:09:17 -07:00

tegra30-cardhu-a04.dts

ARM: tegra: fix node sort order

2013-12-16 14:09:17 -07:00

tegra30-cardhu.dtsi

ARM: tegra: Enable LVDS on Cardhu

2013-12-19 13:07:38 -07:00

tegra30.dtsi

ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI

2013-12-20 09:48:56 -07:00

tegra114-dalmore.dts

ARM: tegra: Enable HDMI support on Dalmore

2013-12-19 17:07:55 -07:00

tegra114.dtsi

ARM: tegra: Add Tegra114 gr3d support

2013-12-19 17:07:54 -07:00

tegra124-venice2.dts

ARM: tegra: Enable power key on Venice2

2013-12-20 10:55:34 -07:00

tegra124.dtsi

ARM: tegra: Add SPI controller nodes for Tegra124

2013-12-16 14:09:22 -07:00

tny_a9g20.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

tny_a9260_common.dtsi

…

tny_a9260.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

tny_a9263.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

tps6507x.dtsi

ARM: regulator: add tps6507x device tree data

2013-04-03 09:44:51 +05:30

tps65217.dtsi

…

tps65910.dtsi

…

twl4030_omap3.dtsi

ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

2013-06-18 18:53:45 -05:00

twl4030.dtsi

Highlights:

2013-11-18 15:35:09 -08:00

twl6030_omap4.dtsi

ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file

2013-10-08 17:51:41 +02:00

twl6030.dtsi

ARM: dts: twl6030: Add PWM support

2013-04-09 00:16:50 +02:00

usb_a9g20_common.dtsi

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9g20_lpw.dts

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9g20-dab-mmx.dtsi

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

usb_a9g20.dts

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9260_common.dtsi

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

usb_a9260.dts

ARM: at91: dt: usb-a9260: update shutdown controller

2013-05-31 16:52:35 +02:00

usb_a9263.dts

ARM: at91: dt: usb-a9263: add dataflash support

2013-05-31 16:52:36 +02:00

versatile-ab.dts

arm/versatile: Fix versatile irq specifications.

2013-10-28 16:50:11 -07:00

versatile-pb.dts

arm/versatile: Fix versatile irq specifications.

2013-10-28 16:50:11 -07:00

vexpress-v2m-rs1.dtsi

…

vexpress-v2m.dtsi

…

vexpress-v2p-ca5s.dts

ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms

2013-04-11 03:01:03 -07:00

vexpress-v2p-ca9.dts

ARM: dts: vexpress: disable CA9 core tile sp804 timer

2013-04-11 15:11:19 -05:00

vexpress-v2p-ca15_a7.dts

ARM: SoC late changes for v3.12

2013-09-09 16:35:29 -07:00

vexpress-v2p-ca15-tc1.dts

ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms

2013-04-11 03:01:03 -07:00

vf610-cosmic.dts

ARM: dts: add initial VF610 Cosmic/Cosmic+ board support

2013-09-26 13:01:38 +08:00

vf610-pinfunc.h

ARM: dts: add SoC level device tree source for VF610

2013-06-17 16:04:23 +08:00

vf610-twr.dts

ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a

2013-09-26 13:01:33 +08:00

vf610.dtsi

ARM: dts: vf610: Add DSPI nodes

2013-09-26 13:01:33 +08:00

vt8500-bv07.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

vt8500.dtsi

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8505-ref.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8505.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8650-mid.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8650.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8750-apc8750.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8750.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8850-w70v2.dts

ARM: dts: Use the PWM polarity flags

2013-09-03 13:08:11 +02:00

wm8850.dtsi

dts: vt8500: Correct reference clock on WM8850 SoCs

2013-06-04 07:31:22 +12:00

xenvm-4.2.dts

xenvm: add a simple PSCI node and a second cpu

2013-04-25 16:46:09 +00:00

zynq-7000.dtsi

ARM: dts: zynq: Add SDHCI nodes

2014-01-31 14:58:56 -08:00

zynq-zc702.dts

ARM: dts: zynq: Add SDHCI nodes

2014-01-31 14:58:56 -08:00

zynq-zc706.dts

ARM: dts: zynq: Add SDHCI nodes

2014-01-31 14:58:56 -08:00

zynq-zed.dts

ARM: dts: zynq: Add SDHCI nodes

2014-01-31 14:58:56 -08:00