iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-s3c24xx
History
Boris Brezillon 102232c546 ARM: Explicitly apply PWM config extracted from pwm_args 
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:08 +02:00
..
include/mach
ARM: s3c24xx: Avoid warning for inb/outb
2016-02-26 08:44:52 +09:00
anubis.h
ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local
2013-01-10 10:45:34 -08:00
bast-ide.c
ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
2013-01-10 10:45:35 -08:00
bast-irq.c
genirq: Remove irq argument from irq flow handlers
2015-09-16 15:47:51 +02:00
bast.h
ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
2013-01-10 10:45:35 -08:00
common-smdk.c
ARM: S3C[24|64]xx: move includes back under <mach/> scope
2014-01-14 15:24:06 +01:00
common-smdk.h
ARM: S3C24XX: plat/common-smdk.h local
2013-03-05 10:42:47 +09:00
common.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
common.h
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
cpufreq-utils.c
ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
2014-05-13 08:00:46 +09:00
fb-core.h
ARM: SAMSUNG: local fb-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
gta02.h
ARM: S3C24XX: make gta02.h local
2013-01-10 10:45:35 -08:00
h1940-bluetooth.c
leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors
2014-11-04 21:58:25 +01:00
h1940.h
leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors
2014-11-04 21:58:25 +01:00
iotiming-s3c2410.c
ARM: S3C24XX: header mach/regs-mem.h local
2013-02-04 10:31:43 -08:00
iotiming-s3c2412.c
ARM: SAMSUNG: Remove legacy clock code
2014-07-19 04:24:59 +09:00
irq-pm.c
ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
2015-12-31 17:26:18 +01:00
Kconfig
ARM: SoC 64-bit changes for v4.6
2016-03-20 15:08:45 -07:00
mach-amlm5900.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-anubis.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-at2440evb.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-bast.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-gta02.c
ARM: s3c24xx: fix unused gta02_configure_pmu_for_charger warning
2016-02-01 09:49:16 +09:00
mach-h1940.c
ARM: s3c24xx: switch to gpiochip_add_data()
2016-02-19 09:51:42 +01:00
mach-jive.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-mini2440.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-n30.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-nexcoder.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-osiris-dvs.c
ARM: mach-s3c24xx: drop owner assignment from platform_drivers
2014-10-20 16:20:06 +02:00
mach-osiris.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-otom.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-qt2410.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-rx1950.c
ARM: Explicitly apply PWM config extracted from pwm_args
2016-05-17 14:45:08 +02:00
mach-rx3715.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-s3c2416-dt.c
ARM: appropriate __init annotation for const data
2015-07-28 13:55:27 +02:00
mach-smdk2410.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-smdk2413.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-smdk2416.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-smdk2440.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-smdk2443.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-tct_hammer.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-vr1000.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
mach-vstms.c
ARM: S3C24XX: remove separate restart code
2014-09-14 02:43:09 +09:00
Makefile
ARM: SAMSUNG: make local setup-camif in mach-s3c24xx
2015-07-30 01:48:44 +09:00
Makefile.boot
…
nand-core.h
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
osiris.h
ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
2013-01-10 10:45:36 -08:00
otom.h
ARM: S3C24XX: make otom-map.h local
2013-01-10 10:45:36 -08:00
pll-s3c2410.c
cpufreq: rename index as driver_data in cpufreq_frequency_table
2013-06-04 14:25:59 +02:00
pll-s3c2440-12000000.c
cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
2015-11-27 10:10:32 +09:00
pll-s3c2440-16934400.c
cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
2015-11-27 10:10:32 +09:00
pm-h1940.S
ARM: samsung: fix assembly syntax for new gas
2013-02-14 15:04:34 +01:00
pm-s3c2410.c
ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
2014-01-14 15:24:54 +01:00
pm-s3c2412.c
ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
2013-03-05 20:20:59 +09:00
pm-s3c2416.c
ARM: S3C24XX: fix building without PM_SLEEP
2015-02-27 05:50:22 +09:00
pm.c
ARM: S3C24XX: fix building without PM_SLEEP
2015-02-27 05:50:22 +09:00
regs-dsc.h
ARM: S3C24XX: Remove unused GPIO drive strength register definitions
2013-04-08 21:37:07 +09:00
regs-mem.h
ARM: S3C24XX: header mach/regs-mem.h local
2013-02-04 10:31:43 -08:00
s3c244x.c
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
s3c2410.c
ARM: S3C24XX: fix building without PM_SLEEP
2015-02-27 05:50:22 +09:00
s3c2412-power.h
ARM: S3C24XX: header mach/regs-power.h local
2013-02-04 10:31:39 -08:00
s3c2412.c
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
s3c2416.c
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
s3c2440.c
ARM: S3C24XX: fix building without PM_SLEEP
2015-02-27 05:50:22 +09:00
s3c2442.c
ARM: S3C24XX: fix building without PM_SLEEP
2015-02-27 05:50:22 +09:00
s3c2443.c
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
setup-camif.c
ARM: SAMSUNG: make local setup-camif in mach-s3c24xx
2015-07-30 01:48:44 +09:00
setup-i2c.c
ARM: S3C[24|64]xx: move includes back under <mach/> scope
2014-01-14 15:24:06 +01:00
setup-sdhci-gpio.c
ARM: S3C[24|64]xx: move includes back under <mach/> scope
2014-01-14 15:24:06 +01:00
setup-spi.c
ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functions
2012-07-13 15:23:46 +09:00
setup-ts.c
ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
2014-01-14 15:24:54 +01:00
simtec-audio.c
ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
2013-01-10 10:45:35 -08:00
simtec-nor.c
ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
2013-01-10 10:45:35 -08:00
simtec-pm.c
ARM: S3C24XX: header mach/regs-mem.h local
2013-02-04 10:31:43 -08:00
simtec-usb.c
ARM: SoC cleanups for 3.14
2014-01-23 18:36:55 -08:00
simtec.h
ARM: S3C24XX: Consolidate Simtec extensions
2012-03-07 01:47:11 -08:00
sleep-s3c2410.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sleep-s3c2412.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sleep.S
ARM: SAMSUNG: Replace inclusion of plat/regs-serial.h header file
2014-02-14 10:35:00 +09:00
spi-core.h
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
2015-07-30 02:00:35 +09:00
vr1000.h
ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local
2013-01-10 10:45:37 -08:00