Russell King deb125abad ARM: l2c: omap2: remove cache size override ...

The cache size should already be present in the L2 cache auxiliary
control register: it is part of the integration process to configure
the hardware IP.  Most platforms get this right, yet still many
cargo-cult program, and assume that they always need specifying to
the L2 cache code.  Remove them so we can find out which really need
this.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2014-05-30 00:49:40 +01:00

..

include/mach

ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too

2013-12-20 17:17:16 +01:00

am33xx-restart.c

ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards

2013-08-21 01:01:30 -07:00

am33xx.h

ARM: OMAP2+: AM43x: early init

2013-06-12 08:00:35 -07:00

am35xx-emac.c

ARM: 7989/1: Delete asm/system.h

2014-02-25 11:33:37 +00:00

am35xx-emac.h

ARM: OMAP: move generic EMAC init to separate file

2012-03-05 11:08:36 -08:00

am35xx.h

ARM: OMAP2+: Make am35xx.h local

2012-09-20 15:02:23 -07:00

board-3430sdp.c

ARM: OMAP: 3430SDP: use new display drivers

2013-08-28 10:23:21 +03:00

board-am3517crane.c

ARM: OMAP2: remove useless variable 'ret'

2013-08-22 00:15:17 -07:00

board-am3517evm.c

ARM: SoC cleanups for 3.12

2013-09-06 13:21:16 -07:00

board-cm-t35.c

[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor

2014-02-24 13:10:14 -03:00

board-cm-t3517.c

Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:

2013-04-08 19:30:48 +02:00

board-devkit8000.c

ARM: OMAP: devkit8000: use new display drivers

2013-08-28 10:23:20 +03:00

board-flash.c

mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes

2013-11-06 23:33:07 -08:00

board-flash.h

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

board-generic.c

fbdev changes for 3.15 (OMAP)

2014-04-07 10:47:51 -07:00

board-ldp.c

ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting

2013-12-27 09:33:27 -08:00

board-n8x0.c

ARM: OMAP2+: dts: add n8x0 onenand

2013-11-25 15:38:09 -08:00

board-omap3beagle.c

ARM: SoC fixes for 3.13 merge window

2013-11-16 12:45:55 -08:00

board-omap3logic.c

arm-soc: cleanups

2013-02-21 14:58:40 -08:00

board-omap3pandora.c

wl1251: move power GPIO handling into the driver

2014-02-28 14:08:26 -05:00

board-omap3stalker.c

misc: (at24) move header to linux/platform_data/

2013-09-30 06:02:34 +02:00

board-omap3touchbook.c

ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes

2013-04-02 10:00:01 -07:00

board-overo.c

ARM: OMAP: overo: use new display drivers

2013-08-28 10:23:19 +03:00

board-rx51-peripherals.c

wl1251: move power GPIO handling into the driver

2014-02-28 14:08:26 -05:00

board-rx51-video.c

ARM: OMAP2+: N900: remove omapdss init for DT boot

2014-04-18 16:37:43 -07:00

board-rx51.c

ARM: OMAP3: RX-51: ARM errata 430973 workaround

2013-10-08 11:57:04 -07:00

board-rx51.h

ARM: OMAP2+: Make board-rx51.h local

2012-09-20 15:02:27 -07:00

board-ti8168evm.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

cclock3xxx_data.c

== Changes to existing drivers ==

2014-04-07 10:24:18 -07:00

cclock2420_data.c

ARM: OMAP2+: clock data: Remove CK_* flags

2013-03-18 09:57:39 -06:00

cclock2430_data.c

ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod

2013-03-30 15:51:33 -06:00

clkt2xxx_apll.c

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

clkt2xxx_dpll.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clkt2xxx_dpllcore.c

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

clkt2xxx_osc.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clkt2xxx_sys.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clkt2xxx_virt_prcm_set.c

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

clkt34xx_dpll3m2.c

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

clkt_clksel.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clkt_dpll.c

ARM: AM43xx: fix dpll init in bypass mode

2014-04-11 12:29:09 -06:00

clkt_iclk.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clock2xxx.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

clock2xxx.h

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clock3xxx.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

clock3xxx.h

CLK: TI: add omap3 clock init file

2014-01-17 12:35:48 -08:00

clock34xx.c

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock34xx.h

…

clock36xx.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clock36xx.h

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock44xx.h

…

clock2430.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clock3517.c

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock3517.h

…

clock_common_data.c

ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clock.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clock.h

ARM: OMAP2+: clock: add support for indexed memmaps

2014-01-17 12:36:57 -08:00

clockdomain.c

ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints

2013-01-29 14:59:58 -07:00

clockdomain.h

ARM: OMAP2+: CM: AM43x clockdomain data

2013-10-13 22:48:36 -06:00

clockdomains2xxx_3xxx_data.c

ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer

2012-07-05 17:25:38 -07:00

clockdomains3xxx_data.c

ARM: OMAP3: fix iva mmu programming issues

2014-03-12 09:48:26 -07:00

clockdomains7xx_data.c

ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header

2013-08-23 04:28:36 -06:00

clockdomains33xx_data.c

ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations

2012-06-18 12:08:06 -06:00

clockdomains43xx_data.c

ARM: OMAP2+: CM: AM43x clockdomain data

2013-10-13 22:48:36 -06:00

clockdomains44xx_data.c

ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP

2012-10-29 22:02:13 -06:00

clockdomains54xx_data.c

ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header

2013-06-08 11:56:15 -06:00

clockdomains2420_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clockdomains2430_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

cm1_7xx.h

ARM: OMAP: DRA7: CM: Add DRA7XX register defines

2013-08-23 04:24:15 -06:00

cm1_44xx.h

ARM: OMAP4+: CM: Move function prototypes to common header for re-use

2013-06-08 11:41:39 -06:00

cm1_54xx.h

ARM: OMAP5: CM: Add OMAP54XX register and bitfield files

2013-06-08 11:46:09 -06:00

cm2_7xx.h

ARM: OMAP: DRA7: CM: Add DRA7XX register defines

2013-08-23 04:24:15 -06:00

cm2_44xx.h

ARM: OMAP4+: CM: Move function prototypes to common header for re-use

2013-06-08 11:41:39 -06:00

cm2_54xx.h

ARM: OMAP5: CM: Add OMAP54XX register and bitfield files

2013-06-08 11:46:09 -06:00

cm2xxx_3xxx.h

ARM: OMAP3: clock: Add 3xxx data using common struct clk

2012-11-12 19:18:49 -07:00

cm2xxx.c

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

cm2xxx.h

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

cm3xxx.c

ARM: OMAP3: CM/control: move CM scratchpad save to CM driver

2013-10-19 10:11:52 -06:00

cm3xxx.h

ARM: OMAP3: CM/control: move CM scratchpad save to CM driver

2013-10-19 10:11:52 -06:00

cm33xx.c

ARM: OMAP2+: CM: cm_inst offset s16->u16

2013-10-13 22:46:38 -06:00

cm33xx.h

ARM: OMAP2+: AM43x: PRCM kbuild

2013-10-13 22:49:06 -06:00

cm44xx.c

ARM: OMAP2+: Move most of plat/io.h into local iomap.h

2012-02-24 10:34:35 -08:00

cm44xx.h

…

cm_44xx_54xx.h

ARM: OMAP4+: CM: Move function prototypes to common header for re-use

2013-06-08 11:41:39 -06:00

cm_common.c

ARM: OMAP2: Fix compillation error in cm_common

2012-11-12 13:42:46 -08:00

cm-regbits-7xx.h

ARM: OMAP: DRA7: CM: Add minimal regbit shifts

2013-08-23 04:28:36 -06:00

cm-regbits-24xx.h

ARM: OMAP2: PRM/CM: Cleanup unused header

2013-07-21 21:13:59 -06:00

cm-regbits-33xx.h

ARM: OMAP3: PRM/CM: Cleanup unused header

2013-07-21 22:10:03 -06:00

cm-regbits-34xx.h

ARM: OMAP3: PRM/CM: Cleanup unused header

2013-07-21 22:10:03 -06:00

cm-regbits-44xx.h

ARM: OMAP4: PRM/CM: Cleanup unused header

2013-07-21 22:10:14 -06:00

cm-regbits-54xx.h

ARM: OMAP5: PRM/CM: Cleanup unused header

2013-07-21 22:10:25 -06:00

cm.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

cminst44xx.c

ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support

2014-02-28 12:43:46 -07:00

cminst44xx.h

ARM: OMAP2+: CM: cm_inst offset s16->u16

2013-10-13 22:46:38 -06:00

common-board-devices.c

ARM: arm-soc: Header cleanups

2012-12-12 11:45:16 -08:00

common-board-devices.h

ARM: OMAP2+: Add quirks support for n8x0

2013-11-25 15:31:17 -08:00

common.c

ARM: OMAP2+: common: remove use of vram

2012-12-16 11:19:48 -08:00

common.h

ARM: OMAP2+: DT 'compatible' tweak for displays

2014-03-19 11:02:46 +02:00

control.c

ARM: OMAP3: control: add API for setting IVA bootmode

2013-10-19 10:11:52 -06:00

control.h

ARM: OMAP3: control: add API for setting IVA bootmode

2013-10-19 10:11:52 -06:00

cpuidle34xx.c

ARM: arm-soc cleanup for 3.10

2013-05-02 09:03:55 -07:00

cpuidle44xx.c

ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP

2014-02-21 15:16:56 -08:00

ctrl_module_core_44xx.h

ARM: OMAP2+: Make ctrl_module_core_44xx.h local

2012-09-20 15:02:29 -07:00

ctrl_module_pad_core_44xx.h

ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local

2012-09-20 15:02:30 -07:00

ctrl_module_pad_wkup_44xx.h

ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local

2012-09-20 15:02:32 -07:00

ctrl_module_wkup_44xx.h

ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local

2012-09-20 15:02:33 -07:00

devices.c

ARM: OMAP2+: change the ISP device archdata MMU name for DT

2014-03-12 09:49:03 -07:00

devices.h

…

display.c

Merge branch '3.15/dss-dt' into 3.15/fbdev

2014-03-20 08:13:50 +02:00

display.h

ARM: OMAP2+: add omapdss_init_of()

2014-03-19 10:52:23 +02:00

dma.c

dmaengine: omap-dma: move register read/writes into omap-dma.c

2014-04-04 00:31:49 +01:00

dpll3xxx.c

ARM: SoC specific changes

2014-04-05 14:19:54 -07:00

dpll44xx.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

drm.c

ARM: OMAP2+: display: Create omapdrm device inside omap_display_init

2013-10-08 14:02:35 -07:00

dsp.c

ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"

2013-04-01 08:52:50 -07:00

dss-common.c

ARM: OMAP2+: remove pdata quirks for displays

2014-04-04 09:55:18 +03:00

dss-common.h

ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board

2013-10-09 07:54:34 -07:00

emu.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

fb.c

ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init

2013-10-08 14:02:51 -07:00

gpio.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

gpmc-nand.c

ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes

2014-03-02 10:15:52 -08:00

gpmc-nand.h

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-onenand.c

ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT

2013-10-03 10:59:50 -07:00

gpmc-onenand.h

ARM: OMAP2+: onenand: header cleanup

2012-10-15 14:42:03 +05:30

gpmc-smc91x.c

ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()

2013-04-01 14:53:43 -05:00

gpmc-smc91x.h

ARM: OMAP2+: Make gpmc-smc91x.h local

2012-09-20 15:02:49 -07:00

gpmc-smsc911x.c

ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()

2013-11-14 10:40:36 -08:00

gpmc-smsc911x.h

ARM: OMAP2+: Make gpmc-smsc911x.h local

2012-09-20 15:03:55 -07:00

gpmc.c

ARM: OMAP2+: Fix GPMC remap for devices using an offset

2014-04-23 11:09:22 -07:00

gpmc.h

ARM: OMAP2+: Add function to read GPMC settings from device-tree

2013-04-01 14:53:45 -05:00

hdq1w.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

hdq1w.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

hsmmc.c

ARM: OMAP2+: Remove omap4 pdata from hsmmc.c

2013-05-30 13:09:31 -07:00

hsmmc.h

MMC highlights for 3.4:

2012-03-28 20:59:45 -07:00

hwspinlock.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

i2c.c

PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.

2013-07-15 11:25:01 +09:30

i2c.h

ARM: OMAP: Fix relative includes for shared i2c.h file

2012-10-31 15:37:13 -07:00

id.c

ARM: OMAP2+: AM43x: determine features

2014-02-28 15:33:27 -08:00

id.h

ARM: OMAP2+: Make id.h local

2012-09-20 15:02:22 -07:00

io.c

i.MX SoC changes for 3.15:

2014-03-09 12:03:18 -07:00

iomap.h

ARM: OMAP5: Add minimal support for OMAP5430 SOC

2012-07-09 19:14:39 +05:30

irq.c

ARM: OMAP2+: INTC: Acknowledge stuck active interrupts

2014-03-13 13:34:48 -07:00

Kconfig

ARM: SoC: driver changes

2014-04-05 15:37:40 -07:00

l3_2xxx.h

ARM: OMAP2+: Make l3_2xxx.h local

2012-09-20 15:03:59 -07:00

l3_3xxx.h

ARM: OMAP2+: Make l3_3xxx.h local

2012-09-20 15:04:00 -07:00

l4_2xxx.h

ARM: OMAP2+: Make l4_2xxx.h local

2012-09-20 15:04:01 -07:00

l4_3xxx.h

ARM: OMAP2+: Make l4_3xxx.h local

2012-09-20 15:04:03 -07:00

Makefile

ARM: OMAP2+: AM43xx: implement support for machine restart

2014-02-28 12:43:45 -07:00

Makefile.boot

ARM: dtb: move all dtb targets to common Makefile

2012-09-20 22:58:17 -07:00

mcbsp.c

ARM: OMAP3: McBSP: do not access CM register directly

2013-10-19 10:11:51 -06:00

mmc.h

ARM: OMAP: Split plat/mmc.h into local headers and platform_data

2012-10-15 12:09:43 -07:00

msdi.c

ARM: OMAP2+: Remove legacy booting support for n8x0

2013-11-25 15:31:17 -08:00

mux34xx.c

ARM: OMAP2+: mux: fix trivial typo in name

2013-09-18 12:02:01 -07:00

mux34xx.h

omap: mux: add AM/DM37x gpios

2013-05-08 17:07:40 -07:00

mux.c

ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap

2013-10-10 15:46:30 -07:00

mux.h

ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF

2014-02-28 15:36:34 -08:00

omap2-restart.c

reboot: arm: change reboot_mode to use enum reboot_mode

2013-07-09 10:33:29 -07:00

omap3-restart.c

reboot: arm: change reboot_mode to use enum reboot_mode

2013-07-09 10:33:29 -07:00

omap4-common.c

ARM: l2c: omap2: remove cache size override

2014-05-30 00:49:40 +01:00

omap4-keypad.h

ARM: OMAP2+: Make omap4-keypad.h local

2012-09-20 15:04:04 -07:00

omap4-restart.c

reboot: arm: change reboot_mode to use enum reboot_mode

2013-07-09 10:33:29 -07:00

omap4-sar-layout.h

ARM: arm-soc cleanup for 3.10

2013-05-02 09:03:55 -07:00

omap24xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap34xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap44xx.h

ARM: OMAP: Make use of available scu_a9_get_base() interface

2013-01-28 10:41:39 -07:00

omap54xx.h

ARM: DRA7: Reuse io tables and add a new .init_early

2013-08-13 11:00:35 +05:30

omap_device.c

Linux 3.13-rc5

2013-12-28 21:38:16 -08:00

omap_device.h

ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected

2013-12-10 09:39:52 -08:00

omap_hwmod_2xxx_3xxx_interconnect_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_2xxx_3xxx_ipblock_data.c

ARM: OMAP2+: Remove dma.h

2013-06-18 00:12:34 -07:00

omap_hwmod_2xxx_interconnect_data.c

ARM: OMAP2+: Remove legacy hwmod entries for omap2

2013-11-25 15:31:18 -08:00

omap_hwmod_2xxx_ipblock_data.c

ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data

2013-12-25 21:41:27 -07:00

omap_hwmod_3xxx_data.c

ARM: OMAP3: hwmod data: Correct clock domains for USB modules

2014-04-11 11:51:22 -06:00

omap_hwmod_7xx_data.c

ARM: DRA7: hwmod data: correct the sysc data for spinlock

2014-02-19 11:34:47 -07:00

omap_hwmod_33xx_43xx_common_data.h

ARM: OMAP2+: hwmod: AM43x support

2013-10-13 22:48:46 -06:00

omap_hwmod_33xx_43xx_interconnect_data.c

ARM: OMAP2+: hwmod: AM335x/AM43x: move common data

2013-10-13 22:47:39 -06:00

omap_hwmod_33xx_43xx_ipblock_data.c

ARM: OMAP2+: hwmod: AM43x support

2013-10-13 22:48:46 -06:00

omap_hwmod_33xx_data.c

ARM: OMAP2+: hwmod: AM335x: runtime register update

2013-10-13 22:47:56 -06:00

omap_hwmod_43xx_data.c

ARM: AM43x: hwmod data: register spinlock OCP interface

2014-02-28 12:43:46 -07:00

omap_hwmod_44xx_data.c

ARM: OMAP4: hwmod data: correct the idlemodes for spinlock

2014-03-13 14:09:57 -07:00

omap_hwmod_54xx_data.c

ARM: OMAP5: hwmod data: add mmu data for ipu & dsp

2014-03-12 09:49:47 -07:00

omap_hwmod_2420_data.c

ARM: OMAP2+: Remove legacy hwmod entries for omap2

2013-11-25 15:31:18 -08:00

omap_hwmod_2430_data.c

ARM: OMAP2+: Remove legacy hwmod entries for omap2

2013-11-25 15:31:18 -08:00

omap_hwmod_common_data.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_common_data.h

ARM: OMAP2+: Remove legacy hwmod entries for omap2

2013-11-25 15:31:18 -08:00

omap_hwmod_reset.c

ARM: omap2: include linux/errno.h in hwmod_reset

2013-02-15 13:36:47 +01:00

omap_hwmod.c

ARM: OMAP2+: hwmod: fix missing braces in _init()

2014-04-11 12:29:09 -06:00

omap_hwmod.h

ARM: OMAP2+: hwmod: AM43x support

2013-10-13 22:48:46 -06:00

omap_opp_data.h

Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock

2012-11-13 13:25:38 -08:00

omap_phy_internal.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

omap_twl.c

ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER

2012-12-17 10:50:41 -08:00

omap-headsmp.S

ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU

2014-04-25 09:48:20 -07:00

omap-hotplug.c

ARM: cpu hotplug: remove majority of cache flushing from platforms

2013-04-18 20:08:04 +01:00

omap-iommu.c

iommu/omap: Add devicetree support

2014-03-04 17:01:57 +01:00

omap-mpuss-lowpower.c

ARM: l2c: fix register naming

2014-05-30 00:48:43 +01:00

omap-pm-noop.c

ARM: OMAP: Move omap-pm-noop.c local to mach-omap2

2012-10-31 15:37:13 -07:00

omap-pm.h

PM / OPP: rename header to linux/pm_opp.h

2013-10-25 22:33:23 +02:00

omap-secure.c

RX-51: Add support for OMAP3 ROM Random Number Generator

2013-10-08 12:02:12 -07:00

omap-secure.h

ARM: OMAP2+: Fix undefined reference to set_cntfreq

2013-11-18 15:33:16 -08:00

omap-smc.S

ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1

2013-10-08 11:55:32 -07:00

omap-smp.c

ARM: OMAP4+: move errata initialization to omap4_pm_init_early

2014-01-31 14:57:37 -08:00

omap-wakeupgen.c

ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number

2014-02-05 20:08:34 +05:30

omap-wakeupgen.h

ARM: OMAP2+: Make omap-wakeupgen.h local

2012-09-20 15:02:37 -07:00

opp2xxx.h

…

opp3xxx_data.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

opp4xxx_data.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

opp2420_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp2430_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp.c

ACPI and power management updates for 3.13-rc1

2013-11-14 13:41:48 +09:00

pdata-quirks.c

fbdev changes for 3.15 (OMAP)

2014-04-07 10:47:51 -07:00

pm24xx.c

ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

2013-10-19 10:11:51 -06:00

pm34xx.c

ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register

2014-04-10 11:01:09 -07:00

pm44xx.c

ARM: OMAP4+: move errata initialization to omap4_pm_init_early

2014-01-31 14:57:37 -08:00

pm-debug.c

Merge branch 'cleanup' into for-linus

2013-05-02 21:31:29 +01:00

pm.c

ACPI and power management updates for 3.13-rc1

2013-11-14 13:41:48 +09:00

pm.h

ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM

2014-03-13 13:41:50 -07:00

pmu.c

ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"

2013-07-04 05:10:51 -07:00

powerdomain-common.c

ARM: OMAP2+: Fix build issues with missing include of linux/bug.h

2012-03-07 17:29:34 -08:00

powerdomain.c

ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm

2013-12-02 11:38:14 -08:00

powerdomain.h

ARM: OMAP2+: PM: AM43x powerdomain data

2013-10-13 22:48:25 -06:00

powerdomains2xxx_3xxx_data.c

ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments

2013-01-29 14:59:58 -07:00

powerdomains2xxx_3xxx_data.h

…

powerdomains2xxx_data.c

ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments

2013-01-29 14:59:58 -07:00

powerdomains3xxx_data.c

ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX

2013-08-23 04:48:42 -06:00

powerdomains7xx_data.c

ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header

2013-08-23 04:28:36 -06:00

powerdomains33xx_data.c

ARM: OMAP AM33xx: powerdomains: add AM335x support

2012-06-18 12:08:06 -06:00

powerdomains43xx_data.c

ARM: OMAP2+: PM: AM43x powerdomain data

2013-10-13 22:48:25 -06:00

powerdomains44xx_data.c

…

powerdomains54xx_data.c

ARM: OMAP5: PRM/CM: Cleanup unused header

2013-07-21 22:10:25 -06:00

prcm43xx.h

ARM: OMAP2: hwmod: Add qspi data for am437x.

2013-10-15 23:49:43 -06:00

prcm44xx.h

ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters

2013-08-23 04:28:36 -06:00

prcm_mpu7xx.h

ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters

2013-08-23 04:28:36 -06:00

prcm_mpu44xx.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

prcm_mpu44xx.h

ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use

2013-06-08 11:54:40 -06:00

prcm_mpu54xx.h

ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers

2013-06-08 11:55:18 -06:00

prcm_mpu_44xx_54xx.h

ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use

2013-06-08 11:54:40 -06:00

prcm-common.h

ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX

2013-08-23 04:48:42 -06:00

prm2xxx_3xxx.c

ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints

2013-01-29 14:59:58 -07:00

prm2xxx_3xxx.h

ARM: OMAP3: clock: Add 3xxx data using common struct clk

2012-11-12 19:18:49 -07:00

prm2xxx.c

Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test

2013-01-03 11:04:21 -08:00

prm2xxx.h

ARM: OMAP2+: PRM: initialize some PRM functions early

2012-11-21 16:15:16 -07:00

prm3xxx.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

prm3xxx.h

ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap

2013-10-10 15:46:30 -07:00

prm7xx.h

ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions

2013-08-23 04:04:23 -06:00

prm33xx.c

ARM: AM33xx: Remove the unused voltagedomain data

2013-06-17 07:26:44 -07:00

prm33xx.h

ARM: OMAP2+: AM33XX: Update the hardreset API

2013-02-08 07:25:28 -07:00

prm44xx_54xx.h

ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain

2013-11-18 11:03:37 -08:00

prm44xx.c

ARM: OMAP: DRA7: Enable PM framework initializations

2013-08-23 04:29:37 -06:00

prm44xx.h

ARM: OMAP4+: PRM: Move function prototypes to common header for re-use

2013-06-08 11:02:20 -06:00

prm54xx.h

ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files

2013-06-08 11:41:01 -06:00

prm_common.c

ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

2014-01-17 12:37:11 -08:00

prm-regbits-24xx.h

ARM: OMAP2: PRM/CM: Cleanup unused header

2013-07-21 21:13:59 -06:00

prm-regbits-33xx.h

ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK

2013-08-29 19:10:59 -07:00

prm-regbits-34xx.h

ARM: OMAP3: PRM/CM: Cleanup unused header

2013-07-21 22:10:03 -06:00

prm-regbits-44xx.h

ARM: OMAP4: PRM/CM: Cleanup unused header

2013-07-21 22:10:14 -06:00

prm.h

ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

2014-01-17 12:37:11 -08:00

prminst44xx.c

ARM: SoC specific changes

2014-04-05 14:19:54 -07:00

prminst44xx.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

scrm44xx.h

ARM: OMAP4: clock: Add 44xx data using common struct clk

2012-11-12 19:10:20 -07:00

scrm54xx.h

ARM: OMAP5: SCRM: Add OMAP54XX header file.

2013-06-08 11:55:44 -06:00

sdram-hynix-h8mbx00u0mer-0em.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-micron-mt46h32m32lf-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-nokia.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

sdram-nokia.h

…

sdram-numonyx-m65kxxxxam.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-qimonda-hyb18m512160af-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdrc2xxx.c

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

sdrc.c

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

sdrc.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

serial.c

ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL

2013-07-30 05:13:35 -06:00

serial.h

ARM: OMAP2+: Fix relative includes for serial.h

2012-10-31 15:37:14 -07:00

sleep24xx.S

ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active

2013-02-06 13:48:14 -07:00

sleep34xx.S

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

sleep44xx.S

ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4

2013-07-04 05:10:51 -07:00

smartreflex-class3.c

PM / AVS: SmartReflex: use omap_sr * for enable/disable interface

2013-06-10 10:46:18 -07:00

soc.h

ARM: OMAP2+: AM43x: Add ID for ES1.1

2014-02-28 15:33:26 -08:00

sr_device.c

ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default

2013-02-12 09:00:33 -08:00

sram34xx.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram242x.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram243x.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram.c

ARM: OMAP2+: AM43x: SRAM base and size

2013-06-12 08:07:23 -07:00

sram.h

ARM: OMAP: Split sram.h to local headers and minimal shared header

2012-10-31 10:14:13 -07:00

ti81xx.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

timer.c

ARM: OMAP2+: AM43x: Use gptimer as clocksource

2014-02-28 15:33:27 -08:00

twl-common.c

arm: omap3: twl: add phy consumer data in twl4030_usb_data

2013-09-27 17:36:58 -07:00

twl-common.h

ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup

2013-01-22 10:34:50 +01:00

usb-host.c

ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes

2013-10-04 09:29:11 -05:00

usb-musb.c

ARM: OMAP2: fix musb usage for n8x0

2013-08-16 09:39:56 -07:00

usb-tusb6010.c

ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()

2013-04-01 14:53:43 -05:00

usb.h

ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data

2013-10-04 09:29:10 -05:00

vc3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vc44xx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vc.c

Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm

2012-11-30 09:12:33 -08:00

vc.h

ARM: OMAP3: VC: calculate ramp times

2012-11-05 15:08:23 -08:00

voltage.c

ARM: OMAP: unwrap strings

2012-09-12 02:57:10 -06:00

voltage.h

Merge branch 'omap/pm-voltdomain-cleanup' into next/soc

2013-06-20 17:35:16 +02:00

voltagedomains2xxx_data.c

…

voltagedomains3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

voltagedomains44xx_data.c

Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock

2012-11-13 13:25:38 -08:00

voltagedomains54xx_data.c

ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data

2013-06-25 17:11:06 -07:00

vp3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vp44xx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vp.c

OMAP voltage layer updates towards supporting auto-retention/auto-off

2012-11-06 17:06:37 -08:00

vp.h

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

wd_timer.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

wd_timer.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00