IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There's a tiny period of time when the _mimage device is visible during
downconversion from mirror to linear. Since it is visible, we need to
create the symlinks, otherwise warning messages will be issued about udev
not creating those symlinks. We have to rely on udev flags completely.
When activating a merging origin it is valid, and expected, to not have
a node in the deptree for both the origin and its merging snapshot. The
_cached_info() caller is only concerned with whether a device is open.
If there isn't a node in the tree the associated device is definitely
not open.
depending on if the mirror has a 'core' or 'disk' log. When there
is a disk log, the new leg is added by stacking a new mirror on
top of the old (one leg is the old mirror and the other leg is the newly
added device). When the log is a 'core' log, the new leg is simply added
to the existing mirror and all the devices are re-synced.
The logic that handles collapsing the stacked 'disk' log mirror was
having the effect of causing 'core' logged mirrors to begin resync'ing
for a second time. I have used the 'CONVERTING' flag to indicate that
a mirror is converting by way of stacking. This is no longer set for
up-converting core logs. The final 'collapse' logic can safely be skipped
for 'core' log mirrors - getting rid of the second resync.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
where we should not expose internal VG names/uuids (the ones with "#" prefix )through the
interface. Otherwise, we could end up with library users opening internal VGs which will
initiate locking mechanism that won't be cleaned up properly.
"#orphans_{lvm1, lvm2, pool}" names are treated in a special way, they are truncated first
to "orphans" and this is used as a part of the lock name then (e.g. while calling lvm_vg_open()).
When library user calls lvm_vg_close(), the original name "orphans_{lvm1, lvm2, pool}"
is used directly and therefore no unlock occurs.
We should exclude internal VG names and uuids in the lists provided by lvmcache:
lvmcache_get_vgids() and lvmcache_get_vgnames().
Allow the number of logical extents to be expressed (for a snapshot) as
a percentage of the total space in the Origin Logical Volume with the
suffix %ORIGIN.
Update the relevant man pages accordingly. Eliminate inconsistencies
between the man pages and tools/commands.h
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
*_safe. This had the effect of segfaulting the log daemon when
converting a mirror from one log type to another.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
When activation of pvmove mirror fails on cluster, some nodes
still possibly succeeded in activation.
- Explicitly deactivate that mirror to be sure
- properly pair suspend/resume calls to not cause memory lock problems in clvmd
Code cannot simply call _finish_pvmove on cluster in this situation, because
changed LVs are suspended twice (causing memory inbalance) and also temporary
mirror is activated when it is not expected (and we know that it failed already).
Patch prepares special function which remove temporary mirror references from
metadata and then resumes changed LVs.
In dev_manager_info 0 means error and 1 info is returned,
not that device exists (that value is part of info struct).
Fix query by uuid only (no name) which returns 0 when device
does not exist.
Support "wait before testing" using '+' in pvmove and lvconvert
interval. Doing so overrides the new default of sleeping after checking
the LV's progress.
Sleeping before checking progress can lead to extraneous polldaemons
being left running. These polldaemons would have otherwise exited had
they checked before sleeping. Checking progress before sleeping helps
workaround the subtly unreliable nature of "finished" state checking
in _percent_run.
Update test/t-mirror-names.sh to use '+' when providing its lvconvert
interval.
more descriptive message if locking fails instead of
"Locking type -1 initialisation failed."
Use read-only locking instead of misleading ignorelocking option
in message.
For mirror repair (and similar tasks) it can happen that full
device rescan is issued from clvmd.
Because code can be in the middle of repair (calling suspend)
clvmd should never try to scan suspended devices
(otherwise it causes deadlock).
Also code must not change ignore_suspended_device flag when
doing refresh_filters (called from lvmcache scan code).
bitmap tracking was switched from the e2fsprogs implementation to
the device-mapper implementation (dm_bitset_t). The latter has a
leading uin32_t field designed to hold the number of bits that are
being tracked. The code was not properly handling this change in
all places. Specifically, when getting the bitmap to/from disk.
Endian adjustments will likely need to be made on the accounting
field as well, since bitmaps are passed between machines on
start-up.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
This spurious 'break' has been here since this code was first committed
in June 2005 and stopped the algorithm behaving as described in the
comment above it and rendered the variable 'already_found_one' useless.
Made .update_metadata optional in 'struct poll_functions' definitions;
eliminated _update_lvconvert_mirror() stub.
Tweak a mirror-specific error message in the generic polldaemon code.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The logic was that lvconvert repair volumes, marking
PV as MISSING and following vgreduce --removemissing
removes these missing devices.
Previously dmeventd mirror DSO removed all LV and PV
from VG by simply relying on
vgreduce --removemissing --force.
Now, there are two subsequent calls:
lvconvert --repair --use-policies
vgreduce --removemissing
So the VG is locked twice, opening space for all races
between other running lvm processes. If the PV reappears
with old metadata on it (so the winner performs autorepair,
if locking VG for update) the situation is even worse.
Patch simply adds removemissing PV functionality into
lvconcert BUT ONLY if running with --repair and --use-policies
and removing only these empty missing PVs which are
involved in repair.
(This combination is expected to run only from dmeventd.)
Version >= 1.8.0 of the DM snapshot target appends metadata sectors used
to a snapshot's status. This patch allows LVM2 to accurately determine
if the snapshot store is empty. Knowing when a snapshot store is empty
is important in the context of snapshot-merge (means merge is complete).
Also update LVM2 to be aware of the possibility for "Merge failed" in
the snapshot-merge target's status.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
the background polldaemon is allowed to start. It can be used
standalone or in conjunction with --refresh or --available y.
Control over when the background polldaemon starts will be particularly
important for snapshot-merge of a root filesystem.
Dracut will be updated to activate all LVs with: --poll n
The lvm2-monitor initscript will start polling with: --poll y
NOTE: Because we currently have no way of knowing if a background
polldaemon is active for a given LV the following limitations exist and
have been deemed acceptable:
1) it is not possible to stop an active polldaemon; so the lvm2-monitor
initscript doesn't stop running polldaemon(s)
2) redundant polldaemon instances will be started for all specified LVs
if vgchange or lvchange are repeatedly used with '--poll y'
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch tries to correctly track changes in lvmcache related to commit/revert.
For vg_commit: if there is cached precommitted metadata, after successfull commit
these metadata must be tracked as committed.
For vg_revert: remote nodes must drop precommitted metadata and its flag in lvmcache.
(N.B. Patch do not touch LV locks here in any way.)
All this machinery is needed to properly solve remote node cache invalidaton which
cause several problems recently observed.
Lock mode is int masked by LCK_TYPE_MASK, always.
Patch also remove uneccessary masking lock flag on sender side,
if masking is needed, it is don on client side already.
- Add drop_precommitted flag to force drop precommitted metadata
- add lvmcache_commit_metadata() which upgrades precommitted metadata in cache
No functional change in this patch - just preparation for following change.
And decode flags in humar readable form in client.
And clean some trailing whitespaces.
No functional change in this patch (only debugging messages changed).
The use_precommitted flag indicates, that we want to use precommitted metadata
(used in suspend call to preload table with precommitted data).
But if there are no such data, committed metadata are read but the cache
still contains that precommitted flag.
(The problem is that later possible drop_metadata call will not invalidate
device in cache.)
The wrong precommitted state is stored in on remote nodes during normal
suspend/resume cycle _without_ vg_write/commit.
Use the PRECOMMITTED status flag here instead (which is always set if using
precommited metadata here).
If renaming snapshot with virtual origin, the origin is renamed too.
But the code must resume LVs in reverse order to properly
pair memlock (in cluster locking).
(The resume of snapshot resumes origin too and later resume
is ignored otherwise.)
When PV device reappears with old metadata, it is
always updated to new version byt atutomatic metadata
repair.
Remove missing flag if device is empty.
If device contains allocated extents, issue warning that
user must remove volumes and re-add this PV before
manipulating with this volume.
This partially solves bug 547842 when one PV (log) is failed,
dmeventd removes that device and later this device reappears and
is wrongly added into VG marked missing.
The memlock_inc() fix is wrong, memlock count is not
propagated to long living process (clvmd) and just
it underflow there.
Also suspend is needed to pre-load precommited metadata
on other nodes (remapping to error taget in this case).
With explicit suspend we generate lock request and code
can update memlock count.
(Infinitely "locked" memory caused that fs_unlock() was not
called properly and on cluster nodes remains
old links in /dev/mapper for not active devices.)
(N.B. failing of suspend call here is not handled as fatal
error - the LV is going to be removed later anyway.)
The new recovery code first tries to repair LV and then removes failed PV
from VG. It means that during operation there can be VG with PV missing,
and vg_read code handles it like not consistent VG.
We already allows returning "inconsistent" commited metadata,
for mirror repair we need this for precommited too.
(The suspend call prepares precommited metadata to inactive table on
other cluster nodes.)
"Inconsistent" here means - correct metadata, just with some metadata areas
not found (obviously on missing or failed PVs).
The LV locks make sense only for clustered LVs.
Properly check cluster flag and never issue cluster lock here.
There are several places in code, where it is already checked, this
patch add this check to all needed calls.
In previous code the lock behaviour was inconsistent,
for example, the pre/post callback can take lock even for local volume,
but deactivate call do not released this lock and it remains held forever.
The local LV lock request now just let run the underlying activation code
on local node, the same process like in local locking.
(Again, this is important for new mirror repair calls, here for local
mirrors but with cluster locking enabled.)
This is unnoticed regression from commit 31672ff60e
The pre/post callback need to convert lock always, local node
is going to modify metadata in this case, it it fails conversion,
the call is ignored.
Also it fixes bug when the lock is not yet held, we cannot set LKF_CONVERT
in this case, it will fail because this lock do not exist.
Note that the automatic conversion is still disabled in activate
call, so the original fix (reactivation of exlusive LV) should
be still in place.
(Code already not fail if unlocking not locked resource.)
This is needed in pre/post lock_lv call, where we can
request the same lock on local node becuase of suspend call.
- do_command and lock_vg expect flags (no change here)
Bug fixes:
- lock_vg should check for NONBLOCK on lock_cmd, flags have this bit masked-out
- do_pre/post_command expect do not mask flag at all, this causes that
the code inside is never run! (see following patches, these functions
expect plain command without flags)
If there is problem deactivate LV and
_init_mirror_log is called with remove_on_failure = 1,
remove the newly created log LV from metadata.
(This can happen if there is active device with the same name
but different UUID.)
The main reason for this "workaround" patch is to
- do not keep _mlog volume in metadata, so user can repeat the action
- print better error message describing the real problem
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
/dev/vg_bar/lv1_mlog: not found: device not cleared
Aborting. Failed to wipe mirror log.
Error locking on node bar-01: Input/output error
Unable to deactivate mirror log LV. Manual intervention required.
Failed to create mirror log.
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
Aborting. Unable to deactivate mirror log.
Failed to initialise mirror log.
pvmove suspends all moved LVs + pvmoveX mirrored LV itself.
This suspends even underlying pvmoveX and following explicit
suspend call is just noop.
But in resume the pvmoveX volume is no longer underlying
device for moved LVs, so it performs full resume with memlock
decrease.
Code must call memlock_inc() if suspend is requested, volume
is already suspended and error is not requested.
These are no longer used by anyone. The dm_list defines are all in
libdevmapper.h and libdm/datastruct/list.c contains any function definitions.
There is some code in "old-tests" that still use this but this code is not
being maintained.
Thanks to Zdenek for spotting this.
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.
The alignment of these structures was also audited to remove holes. The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes. The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes. Each
structures' size has not changed.
