IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Verify that corruption is corrected for raid levels other
than raid1. For other raid levels, attempt to corrupt the
given file pattern on each underlying device, since we don't
know which device contains the file being corrupted.
This ensures that corruption is actually be introduced
when testing the other raid levels.
Verify that corruption is being corrected by checking
the integritymismatches count is non-zero for the raid LV,
which includes the total from all images (since we don't
know which image will have the corruption.)
Each integrity image in a raid LV reports its own number
of integrity mismatches, e.g.
lvs -o integritymismatches vg/lv_rimage_0
lvs -o integritymismatches vg/lv_rimage_1
In addition to this, allow the total number of integrity
mismatches from all images to be displayed for the raid LV.
lvs -o integritymismatches vg/lv
shows the number of mismatches from both lv_rimage_0 and
lv_rimage_1.
Enhance VDO man page with description of memory usage
and space requirements chapter.
Remove some unneeded blank lines in man page.
Use more precise terminology.
Correct examples since cpool and vpool are protected names.
filters needing io weren't being run because bcache
wasn't set up. Read the first 4k of the device
before doing filtering or reading ondisk structs to
reduce reads.
It's possible for a machine with a non-4k page size
to create a PV with an mda_header at an offset other
than 4k. Fix pvck --dump to work with these other
mda offsets. pvck --repair will write a new first
mda at 4096 but lvm with other page sizes will work
with this.
The args for pvcreate/pvremove (and vgcreate/vgextend
when applicable) were not efficiently opened, scanned,
and filtered. This change reorganizes the opening
and filtering in the following steps:
- label scan and filter all devs
. open ro
. standard label scan at the start of command
- label scan and filter dev args
. open ro
. uses full md component check
. typically the first scan and filter of pvcreate devs
- close and reopen dev args
. open rw and excl
- repeat label scan and filter dev args
. using reopened rw excl fd
- wipe and write new headers
. using reopened rw excl fd
Older blockdev tool return failure error code with --help,
and since now the tool abort on command failure, lets
detect missing --getsize64 support directly by running
command and check if it returns something usable.
It's likely very hard to have the system with
such old blockdev tool and newer lvm2 compiled.
Since 'kilobytes' could be seen in 2 way - SI as '1000',
while all programmers sees it as '1024' - switch to
commonly acceptted KiB, MiB....
Resolves RHBZ 1496255.
Test case where filesystem has been corrected via fsck.
In such case fsck returns '1' as success and should be
handled in a same way as '0' since fs is correct.
Set more secure bash failure mode for pipilines.
Avoid using unset variables.
Enhnace error reporting for failing command.
Avoid using error via 'case..esac || error'.
In some cases the dev size may not have been read yet
in set_pv_devices(). In this case get the dev size
before comparing the dev size with the pv size.
Restructure the pvscan code, and add new temporary files
that list pvids in a VG, used for processing PVs that
have no metadata.
The new temp files, in /run/lvm/pvs_lookup/<vgname>, allow a
proper pvscan --cache to be done on PVs that have no metadata.
pvscan --cache <dev> is only supposed to read <dev>, but when
<dev> has no metadata, this had not been possible. The
command had to fall back to scanning all devices to read all
VG metadata to get the list of all PVIDs needed to check for
a complete VG. Now, the temp file can be used in place of
reading metadata from all PVs on the system.
To read the lvm headers and set dev->pvid if the
device is a PV. Difference from label_scan_ functions
is this does not read any vg metadata or add any info
to lvmcache.
Filtering in label_scan was controlled indirectly by
the fact that bcache was not yet set up when label_scan
first ran. The result is that filters that needed data
would not run and would return -EAGAIN, which would
result in the dev flag FILTER_AFTER_SCAN being set.
After the dev header was read for checking the label,
filters would be rechecked because of FILTER_AFTER_SCAN.
All filters would be checked this time because bcache
was now set up, and the filters needing data would
largely use data already scanned for reading the label.
This design worked but is hard to adjust for future
cases where bcache is already set up.
Replace this method (based on setting up bcache, or not)
with a new cmd flag filter_nodata_only. When this flag
is set filters that need data will not run. This allows
the same label_scan behavior when bcache has been set up.
There are no expected changes in behavior.
Touch of stack allocation validated given size with rlimit
and if the reserved_stack was above rlimit, its been completely
ignored - now we will always touch stack upto rlimit/2 size.
cmd context has 'threaded' value that used be set
by clvmd - and allowed proper memory locking management.
Reuse same bit for dmeventd.
Since dmeventd is using 300KiB stack per thread,
we will ignore any user settings for allocation/reserved_stack
until some better solution is find.
This avoids crashing of dmevend when user changes this value
and because in most cases lvm2 should work ok with 64K stack
size, this change should not cause any problems.
Check that type is always defined, if not make it explicit internal
error (although logged as debug - so catched only with proper lvm.conf
setting).
This ensures later type being NULL can't be dereferenced with coredump.
DM tree keeps track of created device while preloading a device tree.
When fail occures during such preload, it will now try to remove
all created and preloaded device. This makes it easier to maintain
stacking of device, since we do not need to check in-depth for
existance of all possible created devices during the failure.
