IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The LV locks make sense only for clustered LVs.
Properly check cluster flag and never issue cluster lock here.
There are several places in code, where it is already checked, this
patch add this check to all needed calls.
In previous code the lock behaviour was inconsistent,
for example, the pre/post callback can take lock even for local volume,
but deactivate call do not released this lock and it remains held forever.
The local LV lock request now just let run the underlying activation code
on local node, the same process like in local locking.
(Again, this is important for new mirror repair calls, here for local
mirrors but with cluster locking enabled.)
This is unnoticed regression from commit 31672ff60e
The pre/post callback need to convert lock always, local node
is going to modify metadata in this case, it it fails conversion,
the call is ignored.
Also it fixes bug when the lock is not yet held, we cannot set LKF_CONVERT
in this case, it will fail because this lock do not exist.
Note that the automatic conversion is still disabled in activate
call, so the original fix (reactivation of exlusive LV) should
be still in place.
(Code already not fail if unlocking not locked resource.)
This is needed in pre/post lock_lv call, where we can
request the same lock on local node becuase of suspend call.
- do_command and lock_vg expect flags (no change here)
Bug fixes:
- lock_vg should check for NONBLOCK on lock_cmd, flags have this bit masked-out
- do_pre/post_command expect do not mask flag at all, this causes that
the code inside is never run! (see following patches, these functions
expect plain command without flags)
If there is problem deactivate LV and
_init_mirror_log is called with remove_on_failure = 1,
remove the newly created log LV from metadata.
(This can happen if there is active device with the same name
but different UUID.)
The main reason for this "workaround" patch is to
- do not keep _mlog volume in metadata, so user can repeat the action
- print better error message describing the real problem
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
/dev/vg_bar/lv1_mlog: not found: device not cleared
Aborting. Failed to wipe mirror log.
Error locking on node bar-01: Input/output error
Unable to deactivate mirror log LV. Manual intervention required.
Failed to create mirror log.
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
Aborting. Unable to deactivate mirror log.
Failed to initialise mirror log.
pvmove suspends all moved LVs + pvmoveX mirrored LV itself.
This suspends even underlying pvmoveX and following explicit
suspend call is just noop.
But in resume the pvmoveX volume is no longer underlying
device for moved LVs, so it performs full resume with memlock
decrease.
Code must call memlock_inc() if suspend is requested, volume
is already suspended and error is not requested.
These are no longer used by anyone. The dm_list defines are all in
libdevmapper.h and libdm/datastruct/list.c contains any function definitions.
There is some code in "old-tests" that still use this but this code is not
being maintained.
Thanks to Zdenek for spotting this.
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.
The alignment of these structures was also audited to remove holes. The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes. The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes. Each
structures' size has not changed.
If the vg_read() returned error, no lock was taken,
so always call vg_release().
Otherwise this can happen because of missing FAILED_*:
# vgchange -a y x --ignorelockingfailure
Volume group "x" not found
Internal error: Attempt to unlock unlocked VG x
The sysfs filter initialise hash of available devices using
scan of /sys/block. We need to refresh even this hash
when performing full scan otherwise the newly appeared
device could be rejected, because there is no entry
in sysfs filter.
This easily could happen when attaching new device
to cluster node. (Only force refresh of context
in clvmd -R works here now).
Unfortunately consequences of this are much worse,
missing device part on that node is replaced with missing segment
(even when no partial arg is selected) and this directly
lead to data corruption.
See https://bugzilla.redhat.com/show_bug.cgi?id=538515
Simply fix it by refreshing device filters in lvmcache
before performing the full device scan.
(on one node a storage connection failed):
# vgchange -a y vg_bar ; echo $?
Error locking on node bar-02: Refusing activation of partial LV lv1. Use --partial to override.
1 logical volume(s) in volume group "vg_bar" now active
0
So activation fails on one node, error is correctly printed but
status code is wrong.
This patch fixes the top level (vgchange) to return proper code
(and print # of activated LVs).
(lvchange returns error properly here.)
(This affects only cluster locking because only cluster
locking module set LCK_PRE_MEMLOCK.)
With currect code you get
# vgchange -a n
Internal error: _memlock_count has dropped below 0.
when using cluster locking.
It is caused by _unlock_memory calls here
if ((flags & (LCK_SCOPE_MASK | LCK_TYPE_MASK)) == LCK_LV_RESUME)
memlock_dec();
Unfortunately it is also (wrongly) called in immediate unlock
(when LCK_HOLD is not set) from lock_vol
(LCK_UNLOCK is misinterpreted as LCK_LV_RESUME).
Avoid this by comparing original flags and provide memlock
code type of operation (suspend/resume).
All hidden (not visible) volumes should be activated through
other visible volumes.
(There are already exceptions like snapshot, mirror log and image,
which should be cleaned one day...)
This solves problems for future types of hidden volumes,
which can have special meaning and must not be activated implicitly
(e.g. key store volume).
- fix missing unlocking of VG
lvcreate -l 100%PVS -n lv1 vg_test
Please specify physical volume(s) with %PVS
Internal error: Volume Group vg_test was not unlocked
- if no PVS specified, use all available
Fix segfault if %PVS in lvresize without PVs list.
The DRBD uses underlying device so code should prefer top
device if duplicate is found.
Patch also introduce
dev_subsystem_part_major and dev_subsytem_name
functions to easily handle all these replication susbystems
and not hardcode md_major call.
See https://bugzilla.redhat.com/show_bug.cgi?id=530881
for full problem description.
Option --all is only partially documented currently, so document in all
commands. Also make {pv|vg|lv}{display|s} man pages consistent with help
output. Remove ununsed 'disk_ARG' parameter. Leave --trustcache out of
the man page output. Update --units argument to show all possible units.
Per discussion on lvm-devel mailing list and part of debian patch set,
don't set defaults for owner and group, since nobody seems to use them, and
still allow override.
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
is granted at one mode and an attempt to convert it wthout the LCK_CONVERT
flag set then it will return errno=EBUSY.
This fixes a pretty bad bug in which an LV could be activated exclusively on
one node and lvchange -ay on another would convert it to shared!
It might break some things in other areas, but I doubt it.
lv_deactivate now returns always success, because tree deactivation
functions (see dm_tree_deactivate_children) always returns success.
Because code should return failure in lv_deactivate at least,
fix it by checking for device existence after real deactivation call.
(After discussion this was prefered solution to dm tree function rewrite
which affects snapshots and mirrors.)
Add configure --enable-units-compat to set si_unit_consistency off by default.
Use standard output units for 'PE Size' and 'Stripe size' in pv/lvdisplay.
Clean up VG_RESIZEABLE flag by creating vg_is_resizeable().
Update comment - we no longer have ALLOW_RESIZEABLE.
Also use vg_is_exported() in one place missed by earlier patch.
Should be no functional change.
Remove the checks for vg_read_error() in most of the tools callback
functions and instead make the check in _process_one_vg() more general.
In all but vgcfgbackup, we do not want to proceed if we get any error
from vg_read(). In vgcfgbackup's case, we may proceed if the backup
is to proceed with inconsistent VGs. This is a special case though,
and we mark it with the READ_ALLOW_INCONSISTENT flag passed to
process_each_vg (and subsequently to _process_one_vg).
NOTE: More cleanup is needed in the vg_read_error() path cases.
This patch is a start.
- add DM_UDEV_RULES_VSN to provide a variable to be checked for in the other
rules (e.g. to check that DM rules are actually installed, we can alternate
functionality in the other rules based on this information, also we have
versioning support for the rules)
- set proper sbin path for dmsetup and blkid, /sbin first, then /usr/sbin.
This is necessary for anaconda to work properly.
- add 'last_rule' for cryptsetup's temporary devices (symlinks in /dev/mapper
only)
Now that we've refactored the internal library functions that do the
vg_remove, we can handle the deferred commit of a lvm_vg_remove() inside
lvm_vg_write(). This makes the VG create/remove API more consistent in
terms of disk commits - they now both require an lvm_vg_write() to commit
the create or remove to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Add a new constraint that vgname locks must be obtained in
alphabetical order. At this point, we have test coverage for
the 3 commands affected - vgsplit, vgmerge, and vgrename.
Tests have been updated to cover these commands.
Going forward any command or library call that must obtain
more than one vgname lock must do so in alphabetical order.
Future patches will update lvm2app to enforce this ordering.
Author: Dave Wysochanski <dwysocha@redhat.com>
