IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The memlock_inc() fix is wrong, memlock count is not
propagated to long living process (clvmd) and just
it underflow there.
Also suspend is needed to pre-load precommited metadata
on other nodes (remapping to error taget in this case).
With explicit suspend we generate lock request and code
can update memlock count.
(Infinitely "locked" memory caused that fs_unlock() was not
called properly and on cluster nodes remains
old links in /dev/mapper for not active devices.)
(N.B. failing of suspend call here is not handled as fatal
error - the LV is going to be removed later anyway.)
The new recovery code first tries to repair LV and then removes failed PV
from VG. It means that during operation there can be VG with PV missing,
and vg_read code handles it like not consistent VG.
We already allows returning "inconsistent" commited metadata,
for mirror repair we need this for precommited too.
(The suspend call prepares precommited metadata to inactive table on
other cluster nodes.)
"Inconsistent" here means - correct metadata, just with some metadata areas
not found (obviously on missing or failed PVs).
If there is problem deactivate LV and
_init_mirror_log is called with remove_on_failure = 1,
remove the newly created log LV from metadata.
(This can happen if there is active device with the same name
but different UUID.)
The main reason for this "workaround" patch is to
- do not keep _mlog volume in metadata, so user can repeat the action
- print better error message describing the real problem
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
/dev/vg_bar/lv1_mlog: not found: device not cleared
Aborting. Failed to wipe mirror log.
Error locking on node bar-01: Input/output error
Unable to deactivate mirror log LV. Manual intervention required.
Failed to create mirror log.
# lvcreate -m 2 -n lv1 -l 1 --nosync vg_bar
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
Aborting. Unable to deactivate mirror log.
Failed to initialise mirror log.
At this point they probably do not matter but going forward they
may - depends on future patches for replicator, etc. I think
these probably got missed because they were 'flags' so I changed
the name to 'status' to be consistent. So the on-disk
things 'flags' and the in structure 'status' (bits).
NOTE: WHATS_NEW already has entry for this in current release.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.
The alignment of these structures was also audited to remove holes. The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes. The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes. Each
structures' size has not changed.
Rename fill_default_pvcreate_params to pvcreate_params_set_defaults.
Rename pvcreate_validate_restore_params to pvcreate_restore_params_validate.
Rename pvcreate_validate_params to pvcreate_params_validate.
Similar to other vg_set_* functions, we create a vg_set_clustered() function
which does a few checks and sets a flag. This is where we check for
any limitations of clusters.
[root@xxxx-01 ~]# lvconvert -m 1 --corelog VG/cmirror
Unable to convert the log of inactive cluster mirror cmirror
I've tried to clean-up the message a little more, so the name
of the mirror stands out more while preserving the sense that
it's not a problem with the specific device, but the fact that
it is inactive that is causing the problem.
New msg:
Unable to convert the log of an inactive cluster mirror, cmirror
Split pvcreate_validate_params into recovery and non-recovery parameters.
This is necessary so we can call the non-recovery validate function from
vgextend / vgcreate. Note in the pvcreate tool case, we must call the
recovery validation function first (see treatment of pe_start and --zero),
and that we add a call to fill_default_pvcreate_params before the validation
functions.
We need defaults for pvcreate_params at a higher level - this will
allow us to use a common function from the tools to take defaults,
then fill in any non-defaults from the commandline.
Future patches will refactor vgcreate/vgextend to call this function
if one or more pvcreate parameters are given on the commandline.
Another refactoring for implicit pvcreate support. We need to get
the pvcreate parameters somehow to the vg_extend routine. Options
seemed to be:
1. Attach the parameters to struct volume_group. I personally
did not like this idea in most cases, though one could make an
agrument why it might be ok at least for some of the parameters
(e.g. metadatacopies).
2. Pass them in to the extend routine. This second route seemed
to be the best approach given the constraints.
Future patches will parse the command line and fill in the actual
values for the pvcreate_single call.
Should be no functional change.
Should be no functional change. If this parameter is set to NULL, just fail
the extend if the device is not already a PV. If non-NULL, try pvcreate_single
before failing. Note that pvcreate_single() handles the log_error in case
of failure so we just return 0 if pvcreate_single() fails.
Clean up VG_RESIZEABLE flag by creating vg_is_resizeable().
Update comment - we no longer have ALLOW_RESIZEABLE.
Also use vg_is_exported() in one place missed by earlier patch.
Should be no functional change.
Of the vgs field vg_attr, a few of the most likely to be used attributes
are clustered, exported, and partial. This patch adds the following 3
functions:
uint64_t lvm_vg_is_clustered(const vg_t vg)
uint64_t lvm_vg_is_exported(const vg_t vg)
uint64_t lvm_vg_is_partial(const vg_t vg)
Now that we've split vg_remove_single into two routines, in the first routine
that only manipulates memory, we move the PVs from the vg->pvs list to the
vg->removed_pvs list. Then later, we iterate through this list to write the
removed PVs to disk, which removes them from the volume group and places them
into the internal ORPHAN VG.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Split vg_remove_single into vg_remove_check (mandatory checks before
vgremove) and vg_remove (do actual remove by committing to disk).
In liblvm, we'd like to provide an consistent API that allows multiple
changes in memory, then let lvm_vg_write() control the commit to disk. In
some cases (for example, lvresize calls fsadm) this may not be possible.
However, since we are using an object model and dividing things into small
operations, the most logical model seems to be the lvm_vg_write model, and
handling the special cases as they arrive. So as best as possible
we move towards this end.
A possible optimization would be to consolidate vg_remove (committing)
code with vgreduce code. A second possible optimization is making vgreduce
of the last device equivalent to vgremove. Today, lvm_vg_reduce fails if
vgreduce is called with the last device, but from an object model perspective
we could view this as equivalent to vgremove and allow it. My gut feel is
we do not want to do this though.
Author: Dave Wysochanski <dwysocha@redhat.com>
Later patches should consolidate the vgremove / vgreduce functions but for
now let's clarify what vg_remove actually does by changing the name.
Author: Dave Wysochanski <dwysocha@redhat.com>
# pvcreate -u udwxr7-BoKY-EeKM-r033-xK6o-4og7-F13sGi /dev/sdc
uuid udwxr7BoKYEeKMr033xK6o4og7F13sGi|��� already in use on "/dev/sdb1"
is now
# pvcreate -u udwxr7-BoKY-EeKM-r033-xK6o-4og7-F13sGi /dev/sdc
uuid udwxr7-BoKY-EeKM-r033-xK6o-4og7-F13sGi already in use on "/dev/sdb1"
Adds 'data_alignment_detection' config option to the devices section of
lvm.conf. If your kernel provides topology information in sysfs (linux
>= 2.6.31) for the Physical Volume, the start of data area will be
aligned on a multiple of the ’minimum_io_size’ or ’optimal_io_size’
exposed in sysfs.
minimum_io_size is used if optimal_io_size is undefined (0). If both
md_chunk_alignment and data_alignment_detection are enabled the result
of data_alignment_detection is used.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Adds pe_align_offset to 'struct physical_volume'; is initialized with
set_pe_align_offset(). After pe_start is established pe_align_offset is
added to it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For now, a simple way to enforce the read/write semantics is to just save the
open mode of the VG. If the caller uses lvm_vg_create, the mode is write.
The caller using lvm_vg_open can use either read or write to open the VG.
Once we have this, we enforce the permissions on each API call and don't allow
a caller to modify a VG that has not been opened properly.
This may be better combined with the locking mode, but I view that as future
cleanup, past this initial release. The intial release should enforce the
basic object semantics though, as described in the lvm.h file.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Adding the ability to get the seqno is important for an application to
determine if something has changed in a VG. Otherwise, the only way to
know is to open the VG with write permission and hold the handle.
This function behaves a little bit different than vg_reduce_single, because
it allowes to remove even the latest pv. This has been done to be consistent
to lvm_vg_create, which creates an empty vg.
removed_pvs has been added to the volume_group struct. vg_reduce adds remove
pvs to this list to be able to commit the changes for the pvs in lvm_vg_comm
in liblvm2app.
Initialize removed_pvs list in format-specific volume_group constructors.
Ideally, we should have a base constructor here that initializes the general
non-format specific members of struct volume_group. But until then, there
are multiple places to initialize these members. Maybe a better patch would
be a base constructor patch for struct volume_group. That is more work
though.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
For liblvm 'get' functions, we should share code with the reporting functions.
This means we need common code to return the values for the fields.
In this patch we refactor a few of the fields needed in liblvm.
Unfortunately, for the simple fields that do derefernces of structure
members (for example, vg_extent_count), we cannot call the common function
from the reporting infrastructure without more refactoring. The reason is
that the dereference of the simple fields is done deep inside the reporting
code (to get the generic "data" pointer), and the display function is a
generic 'size32' function. We can fix these issues later with more
refactoring.
Should be no functional change and the testsuite should cover any possible
regressions. The only fields in the report affected by this patch are:
vg_size, vg_free, and pv_mda_count.
Author: Dave Wysochanski <dwysocha@redhat.com>
After some refactorings, we can now move the bulk of _lvcreate into the
internal library, and we can call from liblvm. In the future, we should
refactor lv_create_single further, probably by segtype, to reduce the
size of struct lvcreate_params. For now this is a reasonable refactor
and allows us to re-use the function from liblvm.
Author: Dave Wysochanski <dwysocha@redhat.com>
