IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Top-level LVs (like RAID, mirror or thin) are ignored when determining which
portions of an LV to pvmove. If the user specified the name of an LV to
move and it was one of the above types, it would be skipped. The code would
never move on to check whether its sub-LVs needed moving because their names
did not match what the user specified.
The solution is to check whether a sub-LVs is part of the LV whose name was
specified by the user - not just if there was a name match.
This patch allows pvmove to operate on RAID, mirror and thin LVs.
The key component is the ability to avoid moving a RAID or mirror
sub-LV onto a PV that already has another RAID sub-LV on it.
(e.g. Avoid placing both images of a RAID1 LV on the same PV.)
Top-level LVs are processed to determine which PVs to avoid for
the sake of redundancy, while bottom-level LVs are processed
to determine which segments/extents to move.
This approach does have some drawbacks. By eliminating whole PVs
from the allocation list, we might miss the opportunity to perform
pvmove in some senarios. For example, if we have 3 devices and
a linear uses half of the first, a RAID1 uses half of the first and
half of the second, and a linear uses half of the third (FIGURE 1);
we should be able to pvmove the first device (FIGURE 2).
FIGURE 1:
[ linear ] [ -RAID- ] [ linear ]
[ -RAID- ] [ ] [ ]
FIGURE 2:
[ moved ] [ -RAID- ] [ linear ]
[ moved ] [ linear ] [ -RAID- ]
However, the approach we are using would eliminate the second
device from consideration and would leave us with too little space
for allocation. In these situations, the user does have the ability
to specify LVs and move them one at a time.
Before, the find_pv_by_name call always failed if the PV found was orphan.
However, we might use this function even for a PV that is not part of any VG.
This patch adds 'allow_orphan' arg to find_pv_by_name fn that allows that.
Attempting pvmove on RAID LVs replaces the kernel RAID target with
a temporary pvmove target, ultimately destroying the RAID LV. pvmove
must be prevented on RAID LVs for now.
Use 'lvconvert --replace old_pv vg/lv new_pv' if you want to move
an image of the RAID LV.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
locally or on more nodes while others are activated exclusively.
Current pvmove code can either use local mirror (for exclusive
activation) or cmirror (for clustered LVs).
Because the whole intenal pvmove LV is just segmented LV containing
segments of several top-level LVs, code cannot properly handle
situation if some segment need to be activated exclusively.
Previously, it wrongly activated exclusive LV on all nodes
(locing code allowed it) but now this is no lnger possible.
If there is exclusively activated LV, pvmove is only
possible if all affected LVs are aslo activated exclusively.
(Note that in non-exclusive mode pvmove still activates LVs
on other nodes during move.)
# lvchange -aly vg_test/lv1
# lvchange -aey vg_test/lv2
# pvmove -i 1 /dev/sdc
Error locking on node bar-01: Device or resource busy
Error locking on node bar-03: Volume is busy on another node
...
Failed to activate lv2
Workaround for the current code with big FIXME,
since proper solution for pvmove needs to be developed.
Commiting this only for the purpose to get cluster testing covered.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
Since format instances will use own memory pool, it's necessary to properly
deallocate it. For now, only fid is deallocated. The PV structure itself
still uses cmd mempool mostly, but anytime we'd like to add a mempool
in the struct physical_volume, we can just rename this fn to free_pv and
add the code (like we have free_vg fn for VGs).
If pvmove crashed and metadata contains pvmove LV
but without miorrored segments, pvmove --abort
will not repair the situation (and finish wth success!).
Fix it by allowing metadata update if aborting
(thus removing pvmove LV) even if no moved LVs detected.
(Tested on real metadata provided by an lvm user:-)
refactoring.
Document the need to cleanup the "name" args passed around polldaemon,
lvconvert and pvmove. It is quite a mess.
Annotate the unused nature of the existing poll_fns->get_copy_vg
methods' 'uuid' arg.
When activation of pvmove mirror fails on cluster, some nodes
still possibly succeeded in activation.
- Explicitly deactivate that mirror to be sure
- properly pair suspend/resume calls to not cause memory lock problems in clvmd
Code cannot simply call _finish_pvmove on cluster in this situation, because
changed LVs are suspended twice (causing memory inbalance) and also temporary
mirror is activated when it is not expected (and we know that it failed already).
Patch prepares special function which remove temporary mirror references from
metadata and then resumes changed LVs.
Fix vg_read() error paths to properly release upon vg_read_error().
Note that in the iterator paths (process_each_*()), we release
inside the iterator so no individual cleanup is needed. However there
are a number of other places we missed the cleanup. Proper cleanup
when vg_read_error() is true should be calling vg_release(vg), since
there should be no locks held if we get an error (except in certain
special cases, which IMO we should work to remove from the code).
Unfortunately the testsuite is unable to detect these types of memory
leaks. Most of them can be easily seen if you try an operation
(e.g. lvcreate) with a volume group that does not exist. Error
message looks like this:
Volume group "vg2" not found
You have a memory leak (not released memory pool):
[0x1975eb8]
You have a memory leak (not released memory pool):
[0x1975eb8]
Author: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Rebased 6/26/09 by Dave W.
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.
Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).
(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)
This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.
(In the pvmove case it is NULL, here we poll for physical volume name).
