IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch fixes link validation for used thin-pool.
Udev rules correctly creates symlinks only for unused new thin-pool.
Such thin-pool can be used by foreing apps (like Docker) thus
has /dev/vg/lv link.
However when thin-pool becomes used by thinLV - this link is no
longer exposed to user - but internal verfication missed this
and caused messages like this to be printed upon 'vgchange -ay':
The link /dev/vg/pool should have been created by udev but it was not
found. Falling back to direct link creation.
And same with 'vgchange -an':
The link /dev/vg/pool should have been removed by udev but it is still
present. Falling back to direct link removal.
This patch ensures only unused thin-pool has this link.
Run umount code only when either thin data or metadata are
above 95% - so if there are resize failures with 60%.
system fill keep running.
Also umount will only be tried with lvm2 LVs.
Foreign users are ATM unsuppored.
Add new logic to identify each unique operation and route
it to the correct function to perform it. The functions
that perform the conversions remain unchanged.
This new code checks every allowed combination of LV type
and requested operation, and for each valid combination
calls the function that performs that conversion.
The first stage of option validation which checks for
incompatible combinations of command line options, is done
done before process_each is called. This is unchanged.
(This new code will allow that first stage validation to
be simplified in a future commit.)
The second stage of checking options against the specific
LV type is done by this new code. For each valid combination
of operation + LV type, the new code calls an existing
function that implements it.
With this in place, the ad hoc checks for valid combinations
of LV types and operations can be removed from the existing
code in a future commit.
(The #if 0 is used to keep the patch clean, and the
disabled code will be removed by a following patch.)
There are detailed messages inside _create_dir_recursive that
dm_create_dir calls (except EROFS which where the message is not
generated, like anywhere else in the code).
When we test Vg.LvCreateRaid some of the hidden LVs volume type go from
'I' to 'i' between the time it takes us to create the LV and
the time it takes to call into refresh to verify the service is up to date.
This is a fairly rare occurance.
We call 'lvm help' to find out if fullreport is supported. Lvm
dumps help to stderr. Common code prints a warning if we exit
with 0, but have something in stderr so we are skipping the warning
message.
The following operations would hang if lvm was compiled with
'enable-notify-dbus' and the client specified -1 for the timeout:
* LV snapshot merge
* VG move
* LV move
This was caused because the implementation of these three dbus methods is
different. Most of the dbus method calls are executed by gathering information
needed to fulfill it, placing that information on a thread safe queue and
returning. The results later to be returned to the client with callbacks.
With this approach we can process an arbitrary number of commands without any
of them blocking other dbus commands. However, the 3 dbus methods listed
above did not utilize this functionality because they were implemented with a
separate thread that handles the fork & exec of lvm. This is done because these
operations can be very slow to complete. However, because of this the lvm
command that we were waiting on is trying to call back into the dbus service to
notify it that something changed. Because the code was blocking the process
that handles the incoming dbus activity the lvm command blocked. We were stuck
until the client timed-out the connection, which then causes the service to
unblock and continue. If the client did not have a timeout, we would have been
hung indefinitely.
The fix is to always utilize the worker queue on all dbus methods. We need to
ensure that lvm is tested with 'enable-notify-dbus' enabled and disabled.
Apply the same idea as vg_update.
Before doing the VG remove on disk, invalidate
the VG in lvmetad. After the VG is removed,
remove the VG in lvmetad. If the command fails
after removing the VG on disk, but before removing
the VG metadata from lvmetad, then a subsequent
command will see the INVALID flag and not use the
stale metadata from lvmetad.
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.
Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:
1. In vg_write(), before devices are suspended, the command sends
lvmetad a short message ("set_vg_info") telling it what the new
VG seqno will be. lvmetad sees that the seqno is newer than
the seqno of its cached VG, so it sets the INVALID flag for the
cached VG. If sending the message to lvmetad fails, the command
fails before the metadata is committed and the change is not made.
If sending the message succeeds, vg_commit() is called.
2. In unlock_vg(), after devices are resumed, the command sends
lvmetad the standard vg_update message with the new metadata.
lvmetad sees that the seqno in the new metadata matches the
seqno it saved from set_vg_info, and knows it has the latest
copy, so it clears the INVALID flag for the cached VG.
If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad. A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.
(This INVALID mechanism already existed for use by lvmlockd.)
This fixes commit 0ba5f4b8e9 which moved
field recalculation (field width and sort position) from
dm_report_object to dm_report_output but it didn't handle the case when
dm_report_column_headings was used separately to report headings (before
dm_report_outpout call) and hence we ended up with intial widths for
fields in the headings.
If we're using dm_report_column_headings, we need to recalculate
fields if we haven't done so yet, the same way as we do in
dm_report_output.
Simplify code around _do_get_report_selection - remove "expected_idxs[]"
argument which is superfluous and add "allow_single" switch instead to
allow for recognition of "--configreport <report_name> -S" as well as
single "-S" if needed.
Null pointer dereferences (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 961 in _do_report_get_selection()
Null pointer dereferences (FORWARD_NULL) Dereferencing null pointer "single_args".
Uninitialized variables (UNINIT) /safe/guest2/covscan/LVM2.2.02.158/tools/toollib.c: 3520 in _process_pvs_in_vgs()
Uninitialized variables (UNINIT) Using uninitialized value "do_report_ret_code".
Null pointer dereferences (REVERSE_INULL) /safe/guest2/covscan/LVM2.2.02.158/libdm/libdm-report.c: 4745 in dm_report_output()
Null pointer dereferences (REVERSE_INULL) Null-checking "rh" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
Incorrect expression (MISSING_COMMA) /safe/guest2/covscan/LVM2.2.02.158/lib/log/log.c: 280 in _get_log_level_name()
Incorrect expression (MISSING_COMMA) In the initialization of "log_level_names", a suspicious concatenated string ""noticeinfo"" is produced.
Null pointer dereferences (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 816 in_get_report_options()
Null pointer dereferences (FORWARD_NULL) Comparing "mem" to null implies that "mem" might be null.
