IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The option can be used in multiple ways (like --cachesettings):
--integritysettings key=val
--integritysettings 'key1=val1 key2=val2'
--integritysettings key1=val1 --integritysettings key2=val2
Use with lvcreate or lvconvert when integrity is first enabled
to configure:
journal_sectors
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
Use with lvchange to configure (only while inactive):
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
lvchange --integritysettings "" clears any previously configured
settings, so dm-integrity will use its own defaults.
lvs -a -o integritysettings displays configured settings.
In case of different PV sizes in a VG, the lvm2 allocator falls short
to define extended segments resiliently asked for 100%FREE RaidLV extension
and a RAID distinct allocation check fails. Fix is to release a memory pool
on the resulting error path.
Until the lvm2 allocator gets enhanced (WIP) to do such complex (and other)
allocations proper, a workaround is to extend a RaidLV to any free space on
its already allocated PVs by defining those PVs on the lvextend command line
then iteratively run further such lvextend commands to extend it to its
final intended size. Mind, this may be a non-trivial extension interation.
The cmd struct is now required in many more functions, and
it's added as a function arg for most direct dev-cache function
calls. The cmd struct is added to struct device (dev->cmd) so
that it can be accessed in many other cases where dev-cache
functions are being called from places where getting the cmd
struct is too difficult.
vgchange -an vg is permitted when the vg lockspace
is not available, because LVs could still be active
for some reason, and they should be inactive when not
properly locked. In case lvmlockd was not running, or
the lockspace was not started, the command was
unnecessarily trying and failing to unlock every LV,
printing errors for every LV. We can skip this when
the lockspace is known to not be available.
In order to free SubLVs after a stripe removing reshape, lvconvert has
to be run without layout changes. Prevent a layout changing request
in case any such freed SubLVs exist and inform the user about the fact
requesting to release them first.
When PVs are created on LVs, remove the devices file entries
for the PVs when the LVs are removed. In general, the devices
file entries should be removed with lvmdevices --deldev when
the LVs are removed (lvremove is the equivalent of detaching
a device from the system when layering PVs on LVs.)
This change is effectively an automatic lvmdevices --deldev
command that is built into lvremove when the LV has a PV on it.
Shortens processing of 'lvcreate -L -V -T' command and
avoid deactivation and its activation with thin_check of the empty
created thin-pool that will be used for the new thin volume
made with a single lvcreate command.
When using message API for parsing VDO stats info, 0 was wrongly
used for fallback for trying the old sysfs API.
Switch to use ULLONG_MAX for values that could not have been obtained
through the message call.
Fixes lvdisplay info for freshly created VDO volume with 0 used data
blocks.
Fix/support creation and usage of the external origin
across thin-pools - so thin LV can use thin LV from
some other thin-pool as external origin (read-only).
When creating external origin via 'lvcreate --type thin'
add the validation for LV being usable as external origin
since certain LVs cannot be really used this way.
Also call this function early during lvcreate cmdline arg
validation se we do not need to do unecesary operation.
Function to recalc chunk_size according to dev hints needs to be
used after chunk_size is being set to thin pool segment - correct
this ordering mistake introduced in previous refactoring commit.
Previous patch that introduced support for thinpool with vdo
not correctly handled header size - as this part is not fully usable
yet. We are going to try to use the 0, but current state of code is not
yet compliant to this logic so keep vdo_header_size during conversion
and alos correctly pass through virtual_extents to vdo formating.
Add code to handle creation of thin-pool with VDO data backend
which can be seen as compressed deduplicated thin-pool.
To avoid need of changing to many internal APIs, pass the conversion
parameters for create thin-pool data volume via cmd_context.
Introduce struct vdo_convert_params {} to pass-in all the parameters
needed for the conversion of an LV to a vdopool + vdo LV.
Function convert_vdo_lv() is also able to create a new LV and swap
segments, so the passed in LV can be later on use for futher
conversion so this refactoring makes it ready for more enhanced
usage.
Introduce vdo_convert_params and use vdo_params from this structure
also with lvcreate_params.
Later we will use this for convertion of thin-pool data volume to VDO.
The first lv_attr flag is 'i' or 'I' for a raid image.
(i: raid image, I: out of sync raid image)
For integrity raid images (_iorig), the flag was not being set.
With commit d7e922480e
lvconvert -m may fail if we try to remove 1st. leg that
is out-of-sync while other leg is in-sync.
Hot fix allows to proceed with such down conversion.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Apply the same logic for 'lvreduce' which exists for newer
systems (compiled with HAVE_BLKID_SUBLKS_FSINFO)
also for older systems for one very common practical case where
the active LV does not have any blkid known signature/filesystem.
New variant recognized this situation and allowed to proceed
without requesting a prompt, while the older variant always
requested confirmation prompt.
With this patch command now works equily for both variants
for 'active LV' without signature and allows to reduce LV
without prompting.
Before checking seg_type of the first area, check there is
some existing area.
Since we now support error and zero segtypes, these do not have
any PV area present.
While create new LV for pool volume, use name from 'pool_metadata%d' naming
sequence. This LV is later on renamed to pool_t/cmeta, but if there
is any error in the middle, we may evenutally leave some 'volume',
With this name it can be slightly more obvious how it got there,
but also when we handle _pmspare name - we get slightly more predictible
name used there for it.
However for a standard usage this commit shall no visible impact as the
name is used temporarily just for cleaning LV.
With 3596558861 it's been introduced
a more fine grained description.
However 'disabled' might be actually more confusing then empty field,
so keep only the info about 'not enabled'aka dmevend is not allowed
to monitor LV which otherwise could be monitored.
Update pool conversion function to handle also conversion of
thick LV to thin LV by moving thick LV into thin pool data LV
and creating fully provissioned thin LV on top of this volume.
Reworking existing conversion to use insert_layer_for_lv co
the uuid is now kept with thin-pool - this should however not
really matter as we are doing full deactivation & activation cycle.
With conversion to thin LV user can use same set of arguments
to set chunk-size.
TODO: add some smart code to decide best values for chunks sizes.
For proper functionality of insert_layer_for_lv we need to
move more bits to layerd LV.
Add some missing new types and correct usage of caller,
so the new LV type is set after the movement.
Validate cache origin in front of the prompt.
Also add some rules to command description file.
TODO:
more validation needed also for lvcreate,
more complex rules with "OR" seems to be needed.
Avoid activation when going to skip zeroing of 'error' segtype
(so it's not erroring out).
Also skip zeroing for 'zero' segtype LV (already being zero).
When lvm2 calculates the maximal usable COW size and crops the user
requested size to this value, don't return the error result from
the 'lvextend' operation.
We already apply the same logic when resizing thin-pool beyond
the supported maximal size.
FIXME: The return code error logic here is somewhat fuzzy.
This vdo parameter existed in the early stage of integration of vdo into lvm2,
but later it's been removed from vdoformat tool - so actually if
there would be any non-zero value it would cause error on lvcreate.
Option was not stored on disk in lvm2 metadata.
Remove this vdo parameter from lvm2 sources.
(Although this vdo parameter will be still accepted on cmdline through
--vdosettings option, but it will be ignored.)
The recent fix 05c2b10c5d ensures that raid LV images are not
using the same devices. This was happening in the lvextend commands
used by this test, so fix the test to use more devices to ensue
redundancy.
In case of e.g. 3 PVs, creating or extending a RaidLV causes SubLV
collocation thus putting segments of diffent rimage (and potentially
larger rmeta) SubLVs onto the same PV. For redundant RaidLVs this'll
compromise redundancy. Fix by detecting such bogus allocation on
lvcreate/lvextend and reject the request.
lvreduce uses _lvseg_get_stripes() which was unable to get raid stripe
info with an integrity layer present. This caused lvreduce on a
raid+integrity LV to fail prematurely when checking stripe parameters.
An unhelpful error message about stripe size would be printed.
There is no easy way to detect, whether device supports zeroing,
and kernel also zeroes device when it's not directly supported,
but with extra message:
operation not supported error, dev X, sector Y op 0x9:(WRITE_ZEROES)...
So to avoid generating such message with every 'lvcreate', use for
zeroing of upto 8K just standard write of zeroed page.
(maybe we can go with even larger sizes).
