1
0
mirror of git://sourceware.org/git/lvm2.git synced 2025-10-03 01:44:19 +03:00

Compare commits

...

616 Commits

Author SHA1 Message Date
Marian Csontos
591b360187 test: Help, default and relative paths in runner
Add help message.
Handle relative paths first.
Use `.` for OUTDIR instead of `/` if empty.
2015-07-17 16:55:08 +02:00
Marian Csontos
2945341047 test: Fix hardcoded /usr/share in testsuite 2015-07-17 15:47:38 +02:00
Marian Csontos
8c6c261b6d debug: Make the debug message less scary. 2015-07-17 15:47:38 +02:00
Marian Csontos
3d696a4417 test: Print stacks for all threads
May be useful in case of deadlocks...
2015-07-17 15:47:38 +02:00
Marian Csontos
550c1847e5 log: Empty LVM_LOG_FILE_EPOCH handling
When env.variable is set to empty getenv returns pointer to empty
string.

In tests it is expected this will produce undecorated debug.log instead
of debug.log__*
2015-07-17 15:47:38 +02:00
Alasdair G Kergon
c7fc06a262 test: Ignore known concurrent VG clvmd failure.
Don't abort test when clvmd processes two VGs concurrently.
  CLVMD: ioctl/libdm-iface.c:1940   Internal error: Performing unsafe table load while 3 device(s) are known to be suspended:  (253:19)
2015-07-17 12:56:52 +01:00
David Teigland
268f53ed0d lockd: fix error cases when built without lvmlockd
When lvm is built without lvmlockd support, vgcreate using a
shared lock type would succeed and create a local VG (the
--shared option was effectively ignored).  Make it fail.

Fix the same issue when using vgchange to change a VG to a
shared lock type.

Make the error messages consistent.
2015-07-16 15:22:06 -05:00
Alasdair G Kergon
b93b85378d alloc: Fix lvextend failure when varying stripes.
A segfault was reported when extending an LV with a smaller number of
stripes than originally used.  Under unusual circumstances, the cling
detection code could successfully find a match against the excess
stripe positions and think it had finished prematurely leading to an
allocation being pursued with a length of zero.

Rename ix_offset to num_positional_areas and move it to struct
alloc_state so that _is_condition() can obtain access to it.

In _is_condition(), areas_size can no longer be assumed to match the
number of positional slots being filled so check this newly-exposed
num_positional_areas directly instead.  If the slot is outside the
range we are trying to fill, just ignore the match for now.

(Also note that the code still only performs cling detection against
the first segment of the LV.)
2015-07-15 23:12:54 +01:00
David Teigland
e15db15926 vgimport: fix the all VGs case
The ALL_VGS_IS_DEFAULT flag was wrongly removed;
it is needed for vgimport -a to work.
2015-07-15 09:26:10 -05:00
David Teigland
2972604f0c vgexport: fix the all VGs case
The ALL_VGS_IS_DEFAULT flag was wrongly removed;
it is needed for vgexport -a to work.
2015-07-15 09:23:30 -05:00
Peter Rajnoha
d947a815e8 config: make a difference between "not found" and "is empty" in log msg for devices/preferred_names
Replace misleading "not found" in the log message when
devices/preferred_names is set to empty array:

Really not found:
device/dev-cache.c:689   devices/preferred_names not found in config: using built-in preferences

Found, but empty:
config/config.c:1431   Setting devices/preferred_names to preferred_names = [ ]
device/dev-cache.c:689   devices/preferred_names is empty: using built-in preferences
2015-07-15 16:14:51 +02:00
Peter Rajnoha
d10fb73f63 config: also log the value used if defined in config, not just defaults
Commit 7e728fe1a1 added a log call
directly in find_config_tree_array when defaults are used.

This patch also adds the log for the value which is found in
existing configuration and for which defaults are not used.

For example:

Defaults used:
config/config.c:1428   devices/scan not found in config: defaulting to scan = [ "/dev" ]

Value defined in configuration used:
config/config.c:1431   Setting devices/scan to scan = [ "/dev", "/mydev", "/abc" ]

This makes the logging consistent with the other find_config_tree_* functions.
2015-07-15 16:02:20 +02:00
Zdenek Kabelac
64c4106219 cleanup: drop unused header file 2015-07-15 13:10:22 +02:00
Zdenek Kabelac
c45e6e3c78 cleanup: avoid double assign
Variable n1 is assigned without using n1 before.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
a7101e7bfb cleanup: drop duplicated seg test
Test is already in seg_is_pool() if branch.
and one minor indent fix.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
beb65056cf makefiles: adding target for generating ctags
make tags generates traditional tags ctags ref list.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
c2d4330f27 cache: enhance cache-pool validation
Capture cache-pool without cache policy name set.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
077645476c cache: capture missing policy name
Policy name has to be always defined.
Capture it as an internal error before write.
When reading metadata without defined policy name, use default defined policy.

TODO: Unsure, but it might have to be actually always 'mq' in this case.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
e9e35b011e cache: handle policy_name separately
Keep policy name separate from policy settings and avoid
to mangling and demangling this string from same config tree.
Ensure policy_name is always defined.
2015-07-15 13:10:22 +02:00
Zdenek Kabelac
86a4d47215 cache: move setting of cache policy
Set policy before saving 1st. metadata and avoid unnecessary reload.
Fixes problem when we stored cache-pool without cache-policy set.
2015-07-15 13:10:21 +02:00
Zdenek Kabelac
4a33d57143 thin: fix warning for overprovisioning
When lvm.conf is properly configure for auto resize of overprovisioned
thin-pool volume, avoid showing any warning (2.02.124).
2015-07-15 13:10:21 +02:00
Peter Rajnoha
34a4109946 config: use find_config_tree_array for all arrays
Use find_config_tree_array for all config arrays. Also, add
INTERNAL_ERROR in case there should have been at least default
value defined for a setting but it was not returned for some
reason (either config_settings.h misconfiguration or other config
tree error printed by functions called by find_config_tree_array).
2015-07-15 10:52:23 +02:00
Peter Rajnoha
7e728fe1a1 config: add "defaulting to" message in case we fall back to defaults in find_config_tree_array 2015-07-15 10:50:57 +02:00
David Teigland
96a883a454 metadata: change function name to _allow_extra_system_id
The previous name was misleading since this is not the
primary system_id check, only the "extra" check.
2015-07-14 14:43:16 -05:00
David Teigland
9ab6bdce01 vgchange: fix lock-start filtering and waiting
Both lock_start filters were being skipped when any lock-opt
values were used.  The "auto" lock-opt should cause the
auto_lock_start_list to be used.  The lock_start_list should
always be used.

The behavior of lock_start_list/auto_lock_start_list are tested
and verified to behave like volume_list/auto_activation_volume_list.

Since the default was changed to wait for lock-start to finish,
the "wait" and "autowait" lock-opt values are not needed, but a
new "autonowait" is added to the existing "nowait" avoid the
default waiting.
2015-07-14 14:39:34 -05:00
David Teigland
681f779a3c lockd: fix error message after a failing to get lock
There are two different failure conditions detected in
access_vg_lock_type() that should have different error
messages.  This adds another failure flag so the two
cases can be distinguished to avoid printing a misleading
error message.
2015-07-14 11:36:04 -05:00
Peter Rajnoha
ac3143c093 config: {thin,cache}_{check,repair}_options are never undefined
Require global/{thin,cache}_{check,repair}_options to be always defined.
If not defined directly by user in the configuration and if there's no
concrete default option to use, make "" (empty string) the default one -
it's then clearly visible in the "lvmconfig --type default" (and
generated lvm.conf) and also it makes its handling in the code more
straightforward so we don't need to handle undefined values.

This means, if there are no default values for these settings defined,
we end up with this generated now:
  {thin,cache}_{check,repair}_options = [ "" ]

So the value is never undefined and if it is, it's an error.

(The cache_repair_options is actually not used in the code at the moment,
but once the code using this setting is in, it will follow the same logic
as used for thin_repair_options.)
2015-07-14 10:13:41 +02:00
David Teigland
d41bab4028 man lvmlockd: update method for changing lock type
The old description did not work.
2015-07-13 16:33:58 -05:00
David Teigland
3da88b8917 lockd: allow vgexport and vgimport
The "exported" state of the VG can be useful with lockd VGs
because the exported state keeps a VG from being used in general.
It's a way to keep a VG protected and out of the way.

Also fix the command flags: ALL_VGS_IS_DEFAULT is not true for
vgimport/vgexport, since they both return errors immediately if
no VG args are specified.  LOCKD_VG_SH is not true for vgexport
beause it must use an ex lock to write the VG.
2015-07-13 14:07:57 -05:00
David Teigland
9cfa27f9c5 lockd: allow nolocking and readonly options
When --nolocking is used (by vgs, lvs, pvs):

. don't use lvmlockd at all (set use_lvmlockd to 0)
. allow lockd VGs to be read

When --readonly is used (by vgs, lvs, pvs, vgdisplay, lvdisplay,
pvdisplay, lvmdiskscan, lvscan, pvscan, vgcfgbackup):

. skip actual lvmlockd locking calls
. allow lockd VGs to be read
. check that only shared gl/vg locks are being requested
  (even though the actually locking is being skipped)
. check that no LV locks are requested, because no LVs
  should be activated or used in readonly mode
. disable using lvmetad so VGs are read from disk

It is important to note the limited commands that accept
the --nolocking and --readonly options, i.e. no commands
that change/write a VG or change/activate LVs accept these
options, only commands that read VGs.
2015-07-13 13:15:51 -05:00
David Teigland
c39f3026a8 vgexport: do not allow lockd VG to be exported
vgexport and vgimport have no use for a shared VG.
2015-07-10 15:53:21 -05:00
David Teigland
222bb2b88d lockd: note that external origins don't work in lockd VGs
in a comment at the point where it fails, and in the
lvmlockd man page.
2015-07-10 15:53:21 -05:00
David Teigland
b8538f5dcd vgchange: allow changing to lockd type when mirrors exist
and update lvmlockd man page to reflect the fact that
mirror LVs work correctly in lockd VGs.
2015-07-10 15:53:21 -05:00
David Teigland
c4fdcb04be lvconvert: disallow splitting in lockd VGs
A new lockd lock needs to be created for the new LV
created by split mirror and split snapshot.  Disallow
these options in lockd VGs until that is implemented.
2015-07-10 15:53:21 -05:00
David Teigland
0823511262 lockd: disable part of lock_args validation
There are at least a couple instances where
the lock_args check does not work correctly,
(listed in the comment), so disable the
NULL check for lock_args until those are
resolved.
2015-07-10 15:53:21 -05:00
Marian Csontos
738ae4a77f lvmpolld: Fix segfault on 32 bit architectures
Explicit conversions are needed to align writes and reads on the stack.
int64_t is popped from stack while int was pushed.
2015-07-10 16:16:57 +02:00
Marian Csontos
47ac6a1a2e test: Fix syntax error in prepare_devs 2015-07-10 16:15:15 +02:00
David Teigland
3d2c4dc034 metadata: fix duplicated LV flag
LOCKD_SANLOCK_LV was using the WRITEMOSTLY flag instead of a new one.
2015-07-09 17:02:30 -05:00
David Teigland
082fcc53cc vgchange: fix disallowed LV types in lockd VG
cow snapshots work in lockd VG (they were wrongly
disallowed), but mirror type LVs do not yet work in
lockd VGs (they were wrongly allowed).
2015-07-09 16:34:23 -05:00
David Teigland
074295245b pvcreate: remove recent warning message
log_warn was added recently because no known code used
the given condition, but running pvcreate on an existing
PV uses this case, and should not produce a warning.
2015-07-09 15:26:32 -05:00
David Teigland
cb14bbdbc9 metadata: add comments describing lock_args for lvmlockd 2015-07-09 15:16:28 -05:00
David Teigland
841c3478fd metadata: vg_validate lock_args 2015-07-09 13:25:00 -05:00
David Teigland
6294509cc6 coverity: cleanup related to lvmlockd
A couple missing mutex unlock on error bugs.
A bunch of buffer size/termination warnings.
2015-07-09 11:29:28 -05:00
Peter Rajnoha
1481125042 libdaemon: config_make_nodes_v needs fixing
Put the change from commit #10d27998b3d2f6100e9e29e83d1d99948c55875f
back so we have working tree again for now. This code needs a bit of
a cleanup to return proper return value to check...
2015-07-09 16:34:08 +02:00
Peter Rajnoha
10d27998b3 coverity: missing return value checks 2015-07-09 15:15:15 +02:00
Peter Rajnoha
a9a7c297ae coverity: missing return value for dm_split_lvm_name pass proper DM name instead of NULL value 2015-07-09 13:11:57 +02:00
Peter Rajnoha
023cf21848 coverity: fix possible invalid dereferences
lib/format1/import-export.c:167: var_deref_op: Dereferencing null pointer "vg->lvm1_system_id"
lib/cache/lvmetad.c:1023: var_deref_op: Dereferencing null pointer "this"
daemons/lvmlockd/lvmlockd-core.c:2659: check_after_deref: Null-checking "act" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
/daemons/lvmetad/lvmetad-core.c:1024: check_after_deref: Null-checking "pvmeta" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
2015-07-09 12:07:41 +02:00
Peter Rajnoha
cb305b9fc0 lvmconf: fix ignored --startstopservices in lvmconf ... --mirrorservice on systemd
If running lvmconf ... --startstopservice --mirrorservice in systemd
environment, handle lvm2-cmirrord accordingly. A typo in the script
caused the lvm2-cmirrord to not start/stop immediately, it was
only enabled/disabled (so the --startstopservice was ignored in this
case).
2015-07-09 10:40:14 +02:00
David Teigland
a0cc570f86 vgchange: don't disable VG lock in lock_stop
It was an optimization to avoid a pointless unlock call.
It affects all VGs, but was only intended to affect the
VG being stopped.
2015-07-08 15:26:25 -05:00
David Teigland
903569d533 lvmlockd: remove log_error instances for normal conditions
There are a number of log_error instances that are replaced
by log_debug because they are not errors.
2015-07-08 15:25:14 -05:00
Andy Grover
d77546773b man: add lvmlocal.conf to config cascade
see BZ 1241182, lvmlocal is searched before lvm.conf but after
lvm_<tag>.conf.
2015-07-08 10:02:28 -07:00
David Teigland
de13abdfdf lvmlockd: fix unreachable code 2015-07-08 11:02:11 -05:00
David Teigland
2566bdfbc3 lvmlockctl: fix uninitialized names
When formatting and printing info from lvmlockd.
Also fix some new line problems.
2015-07-08 10:58:56 -05:00
David Teigland
143a9d7ee6 toollib: skip processing the sanlock LV unless named or all
This prevents 'lvremove vgname' from attempting to remove the
hidden sanlock LV.  Only vgremove should remove the hidden
sanlock LV holding the sanlock locks.
2015-07-08 10:27:21 -05:00
Zdenek Kabelac
6e1f421a6d tests: follow symlinks
If the srcdir itself is a symlink the find would not return expected
value. So support also this config and use -L.
2015-07-08 15:41:48 +02:00
Zdenek Kabelac
fd37eeddd6 coverity: fix regresions from 16e9b32c2f
16e9b32c2f incorrectly moved
free of opened descriptor out of if{} - resulted of
closing random file handle.
2015-07-08 15:41:48 +02:00
Peter Rajnoha
6b48233f25 coverity: fix NULL check in lv->lvid.s
tools/polldaemon.c:457: array_null: Comparing an array to null is not useful: "lv->lvid.s"

The lv->lvid.s is never NULL. The check was supposed to be *lv->lvid.s
to check if the string is not empty.
2015-07-08 15:08:39 +02:00
Peter Rajnoha
3ec4813ba2 coverity: fix missing initialization
... Using uninitialized value "lockd_state" when calling "lockd_vg"
(even though lockd_vg assigns 0 to the lockd_state, but it looks at
previous state of lockd_state just before that so we need to have
that properly initialized!)

libdm/libdm-report.c:2934: uninit_use_in_call: Using uninitialized value "tm". Field "tm.tm_gmtoff" is uninitialized when calling "_get_final_time".

daemons/lvmlockd/lvmlockctl.c:273: uninit_use_in_call: Using uninitialized element of array "r_name" when calling "format_info_r_action". (just added FIXME as this looks unfinished?)
2015-07-08 14:53:30 +02:00
Peter Rajnoha
e8dbaf62d3 coverity: previous commit - not "break" but "fall through" 2015-07-08 14:42:31 +02:00
Peter Rajnoha
705fee709f coverity: missing break in switch expression
lib/lvmpolld/lvmpolld-client.c:109: fallthrough: The above case falls through to this one
2015-07-08 14:36:02 +02:00
Peter Rajnoha
71f4fbfbde coverity: fix uninitialized values and other reported problems
daemons/lvmlockd/lvmlockd-core.c:5709: error[uninitStructMember]: Uninitialized struct member: ds.....
daemons/lvmlockd/lvmlockd-core.c:799: error[uninitstring]: Dangerous usage of 'version' (strncpy doesn't always null-terminate it)
daemons/lvmlockd/lvmlockd-core.c:646: error[memleakOnRealloc]: Common realloc mistake: 'pollfd' nulled but not freed upon failure
2015-07-08 14:19:51 +02:00
Peter Rajnoha
16e9b32c2f coverity: fix resource leaks
lib/log/log.c:115: leaked_storage: Variable "st" going out of scope leaks the storage it points to
daemons/lvmpolld/lvmpolld-core.c:573: leaked_storage: Variable "cmdargv" going out of scope leaks the storage it points to
daemons/lvmlockd/lvmlockd-core.c:5341: leaked_handle: Handle variable "fd" going out of scope leaks the handle
daemons/lvmlockd/lvmlockctl.c:575: overwrite_var: Overwriting "able_vg_name" in "able_vg_name = strdup(optarg)" leaks the storage that "able_vg_name" points to
daemons/lvmlockd/lvmlockctl.c:571: overwrite_var: Overwriting "able_vg_name" in "able_vg_name = strdup(optarg)" leaks the storage that "able_vg_name" points to
daemons/lvmlockd/lvmlockctl.c:385: leaked_handle: Handle variable "s" going out of scope leaks the handle
2015-07-08 13:56:06 +02:00
Peter Rajnoha
3b6840e099 config: replace find_config_tree_node with find_config_tree_array where appropriate 2015-07-08 13:03:08 +02:00
Peter Rajnoha
67a61cce1b config: add find_config_tree_array
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.

With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.

This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
2015-07-08 12:59:22 +02:00
Marian Csontos
d9d47b7b88 spec: Move lvm2-lockd into separate package 2015-07-07 16:53:19 +02:00
Marian Csontos
181e701cc5 spec: Update to use enable_lockd_* 2015-07-07 16:53:19 +02:00
Alasdair G Kergon
a421879bb5 post-release 2015-07-07 13:57:13 +01:00
Alasdair G Kergon
3472910177 pre-release 2015-07-07 13:54:37 +01:00
Ondrej Kozina
088ee7618d lvmpolld: fix possible memory corruption with mem debug
if lvm2 is built with debug memory options dm_free() is not
mapped directly to std library's free(). This may cause memory corruption
as a line buffer may get reallocated in getline with realloc.

This is a temporary hotfix. Other debug memory failure needs to
be investigated and explained.
2015-07-07 14:49:53 +02:00
Peter Rajnoha
a405b89555 conf: regenerate 2015-07-07 14:27:00 +02:00
Alasdair G Kergon
88760141da WHATS_NEW: Update. Fix renamed config setting vsn. 2015-07-07 13:20:01 +01:00
Peter Rajnoha
b174c27d4d conf: regenerate 2015-07-07 14:11:16 +02:00
Zdenek Kabelac
bfd0689d64 tests: use old snapshot for huge volumes
Avoid stacking thins over thins.
2015-07-07 09:57:32 +02:00
Zdenek Kabelac
0ac20a8fdb cache: support clear-needs-check
Support newer cache tool which support new option
--clear-needs-check-flag.

Code does same as for thin_check.
2015-07-07 09:57:27 +02:00
David Teigland
d16332be72 lvmetactl: program to interact with lvmetad
This is not installed; it's only a developer utility
at this point.
2015-07-06 15:54:22 -05:00
David Teigland
6a8cc1dcd4 man lvmlockd: minor updates 2015-07-06 15:32:41 -05:00
Alasdair G Kergon
c923dee8de configure: Separate sanlock and dlm lock config. 2015-07-06 18:20:20 +01:00
David Teigland
633aea92fb config: remove read_only_lock_modes
It had been added as part of lvmlockd code, but it does
not seem particularly useful.
2015-07-06 11:44:28 -05:00
David Teigland
e1733a6271 lockd: remove unused code for overriding lock modes
including the allow_override_lock_modes setting.

It was not possible to override default lock modes any longer,
since the command line options had already been removed.

A mechanism will probably be required later that puts part of
this back.
2015-07-06 11:44:28 -05:00
David Teigland
114744cee1 config: rename lock_retries lvmlockd_lock_retries
Because it only applies to lvmlockd requests, but
sounded too general.
2015-07-06 11:44:28 -05:00
Alasdair G Kergon
dfe3eb12d0 include: Standardise around new tool.h. 2015-07-06 17:30:18 +01:00
David Teigland
d3605b81f3 configure: enable building lvmlockd without sanlock or dlm 2015-07-06 11:09:58 -05:00
Jonathan Brassow
4daea88516 clean-up: typos s/bellow/below/ 2015-07-06 10:15:11 -05:00
Alasdair G Kergon
810ab095e6 macros: Wrap PRI with FMT.
Create a set of wrappers with embedded % such as
  #define FMTu64 "%" PRIu64
2015-07-06 15:09:17 +01:00
Marian Csontos
5fb71bd530 lockd: Clean up spec 2015-07-04 14:36:57 +02:00
Marian Csontos
dd385eb5ac Build lockd only for Fedora >= 22 and RHEL >= 7 2015-07-04 14:36:57 +02:00
Alasdair G Kergon
b4e8de3a31 post-release 2015-07-03 16:58:24 +01:00
Alasdair G Kergon
36ce97c625 pre-release 2015-07-03 16:34:40 +01:00
Zdenek Kabelac
3dbb9a57ca tests: update for new thin pool messaging 2015-07-03 16:13:15 +02:00
Zdenek Kabelac
a900d150e4 thin: move pool messaging from resume to suspend
Existing messaging intarface for thin-pool has a few 'weak' points:

* Message were posted with each 'resume' operation, thus not allowing
activation of thin-pool with the existing state.

* Acceleration skipped suspend step has not worked in cluster,
since clvmd resumes only nodes which are suspended (have proper lock
state).

* Resume may fail and code is not really designed to 'fail' in this
phase (generic rule here is resume DOES NOT fail unless something serious
is wrong and lvm2 tool usually doesn't handle recovery path in this case.)

* Full thin-pool suspend happened, when taken a thin-volume snapshot.

With this patch the new method relocates message passing into suspend
state.

This has a few drawbacks with current API, but overal it performs
better and gives are more posibilities to deal with errors.

Patch introduces a new logic for 'origin-only' suspend of thin-pool and
this also relates to thin-volume when taking snapshot.

When suspend_origin_only operation is invoked on a pool with
queued messages then only those messages are posted to thin-pool and
actual suspend of thin pool and data and metadata volume is skipped.

This makes taking a snapshot of thin-volume lighter operation and
avoids blocking of other unrelated active thin volumes.

Also fail now happens in 'suspend' state where the 'Fail' is more expected
and it is better handled through error paths.

Activation of thin-pool is now not sending any message and leaves upto a tool
to decided later how to finish unfinished double-commit transaction.

Problem which needs some API improvements relates to the lvm2 tree
construction. For the suspend tree we do not add target table line
into the tree, but only a device is inserted into a tree.
Current mechanism to attach messages for thin-pool requires the libdm
to know about thin-pool target, so lvm2 currently takes assumption, node
is really a thin-pool and fills in the table line for this node (which
should be ensured by the PRELOAD phase, but it's a misuse of internal API)
we would possibly need to be able to attach message to 'any' node.

Other thing to notice - current messaging interface in thin-pool
target requires to suspend thin volume origin first and then send
a create message, but this could not have any 'nice' solution on lvm2
side and IMHO we should introduce something like 'create_after_resume'
message.

Patch also changes the moment, where lvm2 transaction id is increased.
Now it happens only after successful finish of kernel transaction id
change. This change was needed to handle properly activation of pool,
which is in the middle of unfinished transaction, and also this corrects
usage of thin-pool by external apps like Docker.
2015-07-03 16:13:14 +02:00
Zdenek Kabelac
5bef18f2eb libdm: support for posting messages in suspend
Add support for sending message in suspend tree for thin-pools.
When this operation is requested whole subtree suspend is then skipped.

This is experimantal support for new lvm2 code for sending message
in suspend phase where 'thin-pool origin-only suspend' will send
messages instead of really suspending thin-pool tree.

When suspening thin volume origin-only - only thin volume is suspended,
then messages are posted and thin-pool suspend is skipped.
2015-07-03 16:13:14 +02:00
Zdenek Kabelac
622064f00f thin: check for overprovisioning 2015-07-03 16:13:14 +02:00
Peter Rajnoha
9cee94372a report: select: add handler to recognize fuzzy time specification
Recognize date and time specification within selection criteria
that is formulated in a more free-form way besides to the original
basic YYYY-MM-DD HH:MM format that libdevmapper supports.

Currently, this free-form format is recognized for lv_time field.

Users are able to use expressions from this set:
  - weekday names ("Sunday" - "Saturday" or abbreviated as "Sun" - "Sat")
  - labels for points in time ("noon", "midnight")
  - labels for a day relative to current day ("today", "yesterday")
  - points back in time with relative offset from today (N is a number)
    ( "N" "seconds"/"minutes"/"hours"/"days"/"weeks"/"years" "ago")
    ( "N" "secs"/"mins"/"hrs" ... "ago")
    ( "N" "s"/"m"/"h" ... "ago")
  - time specification either in hh:mm:ss format or with AM/PM suffixes
  - month names ("January" - "December" or abbreviated as "Jan" - "Dec")

For example:

$ date
Fri Jul  3 10:11:13 CEST 2015

$ lvmconfig --type full report/time_format
time_format="%a %Y-%m-%d %T %z %Z [%s]"

$ lvs
  LV    VG     Time
  lvol0 vg     Fri 2014-08-22 21:25:41 +0200 CEST [1408735541]
  lvol2 vg     Sun 2015-04-26 14:52:20 +0200 CEST [1430052740]
  root  fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
  swap  fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
  lvol1 vg     Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
  lvol3 vg     Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
  lvol6 vg     Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
  lvol4 vg     Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
  lvol5 vg     Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

$ lvs -S 'time=yesterday'
  LV    VG   Time
  lvol4 vg   Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
  lvol5 vg   Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

$ lvs -S 'time since "June 30"'
  LV    VG   Time
  lvol1 vg   Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
  lvol3 vg   Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
  lvol6 vg   Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
  lvol4 vg   Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
  lvol5 vg   Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

$ lvs -S 'time since "noon June 30"'
  LV    VG   Time
  lvol3 vg   Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
  lvol6 vg   Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
  lvol4 vg   Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
  lvol5 vg   Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

$ lvs -S 'time since "2 July 9AM"'
  LV    VG   Time
  lvol4 vg   Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
  lvol5 vg   Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

$ lvs -S 'time since "2 July 1PM"'
  LV    VG   Time
  lvol5 vg   Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]

...and so on.
2015-07-03 10:51:31 +02:00
Peter Rajnoha
3b1422c45c report: call appropriate handler to evaluate fuzzy reserved names and dynamic reserved values
Wire the dm_report_reserved_handler instance call in reporting/selection
infrastructure to handle reserved value actions (currently only
DM_REPORT_RESERVED_PARSE_FUZZY_NAME and DM_REPORT_RESERVED_GET_DYNAMIC_VALUE
actions).
2015-07-03 10:47:38 +02:00
Peter Rajnoha
335707b0e2 report: add infrastructure to recognize fuzzy reserved names and returning dynamic reserved values
With fuzzy names we mean the names for which it's hard or even impossible
to enumerate all possible variations of the name - the name needs to
be evaluated. An example of fuzzy name is a name which has a base
(substring) which matches and it can contain arbitrary variations
around this base. We can cover human language better with fuzzy
names as people may use several different names (or sentences) to
denote the same thing.

With dynamic values we mean the values which are not constants
and they need to be evaluated in runtime. An example of dynamic
value is a value which depends on current system state (e.g. time,
current configuration or any other state which may change and it
needs runtime evaluation).

There's a handler that can be registered with reporting/selection
using dm_report_reserved_handler instance. This is a central point
in which the computation/evaluation happens when processing reserved
values. Currently, there are two actions declared:

  DM_REPORT_RESERVED_PARSE_FUZZY_NAME
  (translates fuzzy name into canonical name)

  DM_REPORT_RESERVED_GET_DYNAMIC_VALUE
  (gets value for canonical name)

The handler is then registered as value in struct
dm_report_reserved_value (see explaining comments besided
the struct dm_report_reserved_value in libdevmapper.h).

Also, this patch provides support for simple caching of values
used during report/selection via dm_report_value_cache_{set,get}.
This is supposed to be used mainly in the dm_report_reserved_handler
instances to save values among calls so all the handler calls work
with the same base value used in computation/evaluation and/or
possibly to save resources if the evaluation is more time-consuming.
The cache is attached to the dm_report handle and so the cache is
dropped one dm_report is dropped.
2015-07-03 10:47:09 +02:00
Peter Rajnoha
82ecfa6f0e cleanup: commit fe70b03 turned lv_time to STR, put it back to TIM 2015-07-03 09:22:48 +02:00
David Teigland
e944a9c635 lockd: fix stub functions for LV locking
The stub functions for lockd LV locking were returning
the wrong result when lvm was compiled without lvmlockd.
2015-07-02 16:36:04 -05:00
David Teigland
fe70b03de2 Add lvmlockd 2015-07-02 15:42:26 -05:00
Peter Rajnoha
a32d5a4afc report: adjust shared flags based on expected type for reserved values
Generic numbers and time values share some operators so make sure
we have the flags correctly adjusted based on expected type if
we're using reserved values.
2015-07-02 16:12:01 +02:00
Peter Rajnoha
eaa0d927a4 tests: add test for 454782f (select with synonyms for string field types) 2015-07-02 11:46:58 +02:00
Peter Rajnoha
454782f1a3 report: fix regression while selecting string fields using synonyms
$ lvs -o name,cache_policy vg/lvol0
  LV    Cache Policy
  lvol0

Before this patch:
$ lvs -o name,cache_policy -S 'cache_policy=undefined' vg/lvol0
  (no match)

With this patch applied:
$ lvs -o name,cache_policy -S 'cache_policy=undefined' vg/lvol0
  LV    Cache Policy
  lvol0
2015-07-02 11:31:54 +02:00
Zdenek Kabelac
7f63fff9c4 display: missed to count with 0
dm_snprintf() returns upon success the number of characters printed
(excluding the null byte used to end output to strings).

So add extra byte to preserve \0.
This fixes regression when displaying more then a single lv name.
2015-07-02 00:10:38 +02:00
Zdenek Kabelac
21c0b1134f libdm: enhance tracing messages
Use new _node_name() and print name major:minor for thin-pool device.
2015-07-01 13:44:28 +02:00
Zdenek Kabelac
04ae5007e3 libdm: add helper function to print _node_name
_node_name() prepares into dm_tree internal buffer device
name and it (major:minor) for easy usage for debug messages.

To avoid any allocation a small buffer in struct dm_tree is preallocated
to store this message.
2015-07-01 13:41:40 +02:00
Peter Rajnoha
a69ded43b0 config: report/time_format appeared in v2.02.123 2015-07-01 08:20:20 +02:00
Alasdair G Kergon
4c629a5257 locking: Add missing error handling.
Add missing error logging and detection to unlock_vg and callers
of sync_local_dev_names etc.
2015-06-30 18:54:38 +01:00
Alasdair G Kergon
3489e68ef7 post-release 2015-06-30 17:12:56 +01:00
Alasdair G Kergon
a3af8b0626 pre-release 2015-06-30 17:11:21 +01:00
Alasdair G Kergon
92138badd4 conf: Regenerate.
Fix missing --clear-needs-check-flag.
2015-06-30 17:09:56 +01:00
Alasdair G Kergon
f6ad48f0e5 libdm: Rename struct time_value variables.
warning: declaration of ‘time’ shadows a global declaration
2015-06-30 16:17:22 +01:00
Peter Rajnoha
ded279f826 report: add support for time (basic)
This patch adds support for time values used in reporting fields.
The raw values are always stored as number of seconds since epoch.

The support that comes with this patch is the basic one which allows
only for recognition of strictly formatted date and time in selection
criteria (the format follows a subset of formats defined by ISO 8601):

  date time timezone

  date:
    YYYY-MM-DD (or shortly YYYYMMDD)
    YYYY-MM (shortly YYYYMM), auto DD=1
    YYYY, auto MM=01 and DD=01

  time:
    hh:mm:ss (or shortly hhmmss)
    hh:mm (or shortly hhmm), auto ss=0
    hh (or shortly hh), auto mm=0, auto ss=0

  timezone (always with + or - sign):
    +hh:mm or -hh:mm (or shortly +hhmm or -hhmm)
    +hh or -hh

Or directly the time (number of seconds) since Epoch (1970-01-01 00:00:00 UTC)
when the number value is prefixed by "@":

   @number_of_seconds_since_epoch

This patch also adds aliases for comparison operators
used together with time values which are more intuitive
to use:
  since (as alias for >=)
  after (as alias for >)
  until (as alias for <=)
  before (as alias for <)

For example:

$ lvmconfig --type full report/time_format
time_format="%Y-%m-%d %T %z %Z [%s]"

$ lvs -o name,time vg
  LV    Time
  lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
  lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
  lvol2 2015-04-26 14:52:20 +0200 CEST [1430052740]
  lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]

$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30"'
  LV    Time
  lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
  lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
  lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]

$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30 6:00"'
  LV    Time
  lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
  lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]

$ lvs vg -o name,time -S 'time since @1435519541'
  LV    Time
  lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
  lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
  lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]

This is basic time recognition support that is directly a part of
libdevmapper. Recognition of more free-form expressions will be a
part of subsequent patches.
2015-06-30 15:15:10 +02:00
Peter Rajnoha
89d355ea04 configure: set DEFAULT_FALLBACK_TO_LVM1 in configure and use it in config_settings.h
Just like we have DEFAULT_USE_LVMETAD (or DEFUALT_USE_LVMPOLLD), use
fallback_to_lvm1=1 lvm.conf setting if we configured lvm2 with
--enable-lvm1-fallback and use fallback_to_lvm1=0 otherwise.

Also, generate proper lvm.conf.in with unconfigured value.
2015-06-30 14:09:05 +02:00
Peter Rajnoha
d7b9349ce7 cleanup: report: use internal wrapper for various variables used for handling reserved values
Just a cleanup - wrap several variables we use to handle reserved
values into a structure for easier manipulation in the code.
2015-06-30 10:47:51 +02:00
Peter Rajnoha
d8996a17d1 select: add support for range reserved values and flagging named-only values
This patch allows for registration and recognition of reserved
values which are ranges, so they're composed of two values actually
to denote the lower and upper bound for the range (stored as an array
with exactly two items to define the boundaries).

Also, this patch allows for flagging reserved values as named-only
which means that such values are not strictly reserved. The strictly
reserved values are reserved values as used before this patch.

Distinction between strictly-reserved and named-only values
is clearly visible with comparisons. Normally, strictly reserved
value is not accounted for if we do "greater than" or "lower than"
comparisons, for example:

1  2  3 ....
   |
  abc

- we have "abc" as reserved value for field with value "2"
- the value reported for the field is "abc" (or "2", it doesn't matter here)
- the selection we're processing is -S 'field < abc'
- the result of the selection gives nothing as "abc" is strictly
reserved value (bound to "2") and there's no order defined for
it and it would only match if we directly compared the value
(so -S 'field = abc' would match)

With named-only values, the "abc" is named-only value for "2",
so selection -S 'field < abc" is the same as using -S 'field < 2'.
The "abc" is just an alias for some value so the value or its
assigned name can be used equally in selection criteria.
2015-06-30 10:47:50 +02:00
Peter Rajnoha
77f0e7a450 cleanup: time: error out on incorrect time_format and indentation in config_settings.h 2015-06-29 16:17:33 +02:00
Peter Rajnoha
621398ebb7 lv: time: increase buffer to 4k in lv_time_dup 2015-06-29 15:24:00 +02:00
Peter Rajnoha
1587236089 toolcontext: use proper set of chars to check time format against 2015-06-29 14:45:53 +02:00
Peter Rajnoha
125cd06698 conf: make time format configurable
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).

For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
  LV    VG   Attr       LSize Time
  lvol0 vg   -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
  lvol1 vg   -wi-a----- 4.00m 2015-06-29 09:17:11 +0200

(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
  LV    VG   Attr       LSize Time
  lvol0 vg   -wi-a----- 4.00m @1435241914
  lvol1 vg   -wi-a----- 4.00m @1435562231
2015-06-29 14:30:35 +02:00
Peter Rajnoha
6f793d34ca config: regenerate lvm.conf.in and lvmlocal.conf.in 2015-06-29 13:43:28 +02:00
Peter Rajnoha
7b45a1fc60 refactor: rename _out_tags fn to _out_list and use it for string lists in general 2015-06-29 09:43:55 +02:00
Peter Rajnoha
f143ad3a93 cleanup: remove unused tags.c file 2015-06-29 09:43:47 +02:00
Peter Rajnoha
e29d4773f4 refactor: rename alloc_printed_tags fn to _alloc_printed_str_list and use it for string lists in general 2015-06-29 09:43:41 +02:00
Peter Rajnoha
77c2d11657 refactor: rename read_tags fn to _read_str_list and use it for string lists in general 2015-06-29 09:43:32 +02:00
Zdenek Kabelac
02767c5eb1 tests: tests needs pre 1.13 thin-pool extorg
This test is testing older style, so disable feature when present.
2015-06-26 22:16:01 +02:00
Zdenek Kabelac
03c4fee5a7 tests: deactivate before remove
Testing if this avoids udev race with removal of snapshot on some
test machines.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1217819
2015-06-26 22:11:46 +02:00
Ferenc Wágner
a62cd64db6 makefiles: avoid bash == operator syntax, use = instead
Commit e587b0677b broke the build on
systems where /bin/sh is Dash, for example.

Origin patch by Ferenc Wágner <wferi@niif.hu>  changed later to
avoid using shell call, so makefile add 'server' target when
one of  metad or polld daemon is requested.
2015-06-26 22:11:45 +02:00
Peter Rajnoha
844707067b lvmconfig: do not display settings with undefined default values
Do not display settings with undefined default values, but do display
these settings in case the value is defined directly in any part of
the existing config cascade.

For example, the lvmconfig --type current always displays these settings
(as it's somewhere in "current" configuration cascade that makes it defined).
The lvmconfig --type full displays these settings only if it's defined
somewhere in the cascade, but not if default value is used instead
The lvmconfig --type default never displays these settings...

More concrete example - let's have activation/volume_list directly
set in lvm.conf and activation/read_only_volume_list not set.
Both of these settings have *undefined default* values.

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list
  volume_list="/dev/vg/lv"

(...only volume_list is defined, hence it's printed)

However, the comments will display more info (see also previous commit):

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list --withsummary

  # Configuration option activation/volume_list.
  # Only LVs selected by this list are activated.
  # This configuration option does not have a default value defined.
  # Value defined in existing configuration has been used for this setting.
  volume_list="/dev/vg/lv"

  # Configuration option activation/read_only_volume_list.
  # LVs in this list are activated in read-only mode.
  # This configuration option does not have a default value defined.
2015-06-25 13:51:55 +02:00
Peter Rajnoha
07a34184db lvmconfig: display comment about value from existing config being used
Display comment abour value from existing config being used. For example:

$ lvmconfig --type full --withsummary report/compact_output report/buffered

 # Configuration option report/compact_output.
 # Do not print empty report fields.
 # Value defined in existing configuration has been used for this setting.
 compact_output=1

 # Configuration option report/buffered.
 # Buffer report output.
 buffered=1
2015-06-25 13:51:54 +02:00
Peter Rajnoha
c794c163b5 lvmconfig: add --type full to display full tree of settings
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.

The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.

The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
2015-06-25 13:33:52 +02:00
Peter Rajnoha
f6de196c21 config: also clone associated id when cloning node using dm_config_clone_node{_with_mem} 2015-06-25 10:21:07 +02:00
Alasdair G Kergon
110a0745cd man: Add missing env vars to lvm man page. 2015-06-24 20:43:35 +01:00
David Teigland
7760665fb8 libdaemon: add comment about using main and init 2015-06-24 12:16:26 -05:00
Zdenek Kabelac
44c7bc0262 tests: workaround udev problem
If udev has not removed 'dir' entry - just issue TEST WARNING, clear
dir, but do not fail whole rest of test.
2015-06-24 15:19:53 +02:00
Zdenek Kabelac
e217873ed6 snapshot: add synchronization point
Synchronize with udev logic before reusing device as snapshot.

This patch tries to fix the problem with udev, where we manage
to 'active' LV for clearing, then we deactivate such device and
active again as member of 'origin&snapshot' tree all in 1 step.

There needs to be a sync point where udev has time to remove all links,
otherwise we race with scans and we may end-up with mysterious 'free'
links in the system pointing to wrong dm names.

This patch tries to fix failing topology cluster tests..
2015-06-24 15:18:49 +02:00
Peter Rajnoha
cf189a572a commands: --withspaces also for config and lvmconfig cmd aliases 2015-06-24 13:28:40 +02:00
Peter Rajnoha
7559d871fb make: use lvmconfig ... --withspaces when generating lvm.conf and lvmlocal.conf 2015-06-24 13:20:38 +02:00
Peter Rajnoha
a4724350e4 lvmconfig: add --withspaces option
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!

Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
2015-06-24 13:19:23 +02:00
Peter Rajnoha
a25d92c88b WHATS_NEW: recent commits - config value format flags 2015-06-24 11:34:02 +02:00
Peter Rajnoha
982cf44ff0 config: regenerate configure.in to accomodate all recent changes
Hopefully closer to the ideal.
2015-06-24 11:24:10 +02:00
Peter Rajnoha
63c5aaaaf2 config: devices/filter and devices/global_filter setting have 'a/.*/' as default value 2015-06-24 11:23:54 +02:00
Peter Rajnoha
c725648f6c config: allow empty values for {thin,cache}_{check,repair}_options
It's not an error to define empty values for
{thin,cache}_{check,repair}_options - such empty value means no
options are passed when these external commands are called.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
20e336f21c configure: add DEFAULT_USE_BLKID_WIPING
If blkid wiping is possible, than set use_blkid_wiping=1 and
use_blkid_wiping=0 otherwise for its default value. If blkid wiping
is disabled during configure and use_blkid_wiping=1 is set by chance,
it's simply ignored - this patch is just a cleanup that makes it more
obvious for the user (we use similar logic for use_lvmetad and
use_lvmpolld settings).
2015-06-24 11:13:38 +02:00
Peter Rajnoha
6575122c63 config: display global/umask in octal form 2015-06-24 11:13:38 +02:00
Peter Rajnoha
74bf75a2f5 config: use proper unconfigured default values for use_lvmetad and use_lvmpolld settings
Default value for lvmetad and lvmpolld has hooks in configure script,
the "lvmconfig --type default --unconfigured" should display:

   use_lvmetad = @DEFAULT_USE_LVMETAD@
   use_lvmpolld = @DEFAULT_USE_LVMPOLLD@

Note that these settings are not of string type. Recent change (the
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES formatting flag) makes it
possible to recognize that the setting is not of string type and if
there's unconfigured value defined for it, the enclosing " " is
automatically removed on output.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
1545ebf938 config: cleanup default values for some configuration settings with array values
Do not use "#S" (blank string) as default value as that ends up with
'key = [ "" ]' to be generated which is not what we want in most cases.

Also, fix default values for global/{thin,cache}_{check,repair}_options
and avoid assigning blank values. For example, the thin_check_options
had this set as default value previously:

  "#S" DEFAULT_THIN_CHECK_OPTION1 "#S" DEFAULT_THIN_CHECK_OPTION2

If any (or both) of DEFAULT_THIN_CHECK_OPTION* variables was set
to "", we ended up with clumsy default value generated like:

  thin_check_options = [ "-q", "" ]

With this patch, we end up with correct:

  thin_check_options = [ "-q" ]

or, if all options are undefined:

  thin_check_options = [ ]

Which is the correct way to express this.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
9465963faf config: add support for config value formatting flags
There are two basic groups of formatting flags (32 bits):
  - common ones applicable for all config value types (lower 16 bits)
  - type-related formatting flags (higher 16 bits)

With this patch, we initially support four new flags that
modify the the way the config value is displayed:

  Common flags:
  =============

  DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
    to be enclosed in "[ ]" even if there's only one item
    (previously, there was no way to recognize an array with one
     item and scalar value, hence array values with one member
     were always displayed without "[ ]" which libdm accepted
     when reading, but it may have been misleading for users)

  DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
    be inserted in "key = value" (or key = [ value, value, ... ] in
    case of arrays), compared to "key=value" seen on output before.
    This makes the output more readable for users.

  Type-related flags:
  ===================

  DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
    "0" as a prefix (libdm's config reading code can handle this via
    strtol just fine so it's properly recognized as number in octal
    form already if there's "0" used as prefix)

  DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
    strings without enclosing " "

This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
2015-06-24 11:13:37 +02:00
David Teigland
c5ba60827e libdaemon: allow main processing function to be specified 2015-06-23 16:55:45 -05:00
David Teigland
ba2b701f2c doc: mention new invalid states in lvmetad_design 2015-06-23 16:48:28 -05:00
David Teigland
c23e7ff2a0 Reread global state the lvmetad copy is stale
This is the client side handling of the global_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.

The function added here:
. checks if the global state in lvmetad is invalid
. if so, scans disks to update the state in lvmetad
. clears the global_invalid flag in lvmetad
. updates the local udev db to reflect any changes
2015-06-23 16:36:40 -05:00
David Teigland
679b6b5b29 Reread a VG if the lvmetad copy is stale
and update the lvmetad copy after it is reread from disk.

This is the client side handling of the vg_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
2015-06-23 16:36:40 -05:00
David Teigland
bf77f71711 lvmetad: add invalidation method
Add the ability to invalidate global or individual VG metadata.
The invalid state is returned to lvm commands along with the metadata.
This allows lvm commands to detect stale metadata from the cache and
reread the latest metadata from disk (in a subsequent patch.)

These changes do not change the protocol or compatibility between
lvm commands and lvmetad.

Global information
------------------

Global information refers to metadata that is not isolated
to a single VG , e.g. the list of vg names, or the list of pvs.

When an external system, e.g. a locking system, detects that global
information has been changed from another host (e.g. a new vg has been
created) it sends lvmetad the message: set_global_info: global_invalid=1.
lvmetad sets the global invalid flag to indicate that its cached data is
stale.

When lvm commands request information from lvmetad, lvmetad returns the
cached information, along with an additional top-level config node called
"global_invalid".  This new info tells the lvm command that the cached
information is stale.

When an lvm command sees global_invalid from lvmated, it knows it should
rescan devices and update lvmetad with the latest information.  When this
is complete, it sends lvmetad the message: set_global_info:
global_invalid=0, and lvmetad clears the global invalid flag.  Further lvm
commands will use the lvmetad cache until it is invalidated again.

The most common commands that cause global invalidation are vgcreate and
vgextend.  These are uncommon compared to commands that report global
information, e.g. vgs.  So, the percentage of lvmetad replies containing
global_invalid should be very small.

VG information
--------------

VG information refers to metadata that is isolated to a single VG,
e.g. an LV or the size of an LV.

When an external system determines that VG information has been changed
from another host (e.g. an lvcreate or lvresize), it sends lvmetad the
message: set_vg_info: uuid=X version=N.  X is the VG uuid, and N is the
latest VG seqno that was written.  lvmetad checks the seqno of its cached
VG, and if the version from the message is newer, it sets an invalid flag
for the cached VG.  The invalid flag, along with the newer seqno are saved
in a new vg_info struct.

When lvm commands request VG metadata from lvmetad, lvmetad includes the
invalid flag along with the VG metadata.  The lvm command checks for this
flag, and rereads the VG from disk if set.  The VG read from disk is sent
to lvmetad.  lvmetad sees that the seqno in the new version matches the
seqno from the last set_vg_info message, and clears the vg invalid flag.
Further lvm commands will use the VG metadata from lvmetad until it is
next invalidated.
2015-06-23 16:36:33 -05:00
Zdenek Kabelac
4c6b3f5ec3 tests: use vgscan after enable_dev
Since our test environment runs also in non-real-udev world,
it's using  /etc/.cache file with scanned files.

So in this case it is mandatory the user runs 'vgscan'
after a device reappears in the system.

This 'first' lvm2 command then fixes metadata (just like vgs did).
2015-06-23 13:39:57 +02:00
Zdenek Kabelac
ae76e8f0d0 tests: skip when snapshot does not work
Some older kernel (i.e. 3.11.10 on fc20) do not work properly.
Skip the test if snapshot does not meet 50%.
2015-06-23 13:25:09 +02:00
Zdenek Kabelac
7ee3ccd826 tests: newer version needed for ext-orig 2015-06-23 11:56:42 +02:00
Zdenek Kabelac
9c86d33e68 cleanup: avoid printing gcc warning
Casting to (void) with gcc doesn't remove unused_result warning.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509
2015-06-23 11:06:02 +02:00
Alasdair G Kergon
50d70eff35 post-release 2015-06-20 01:05:21 +01:00
Alasdair G Kergon
134b727b4f pre-release 2015-06-20 00:57:35 +01:00
Zdenek Kabelac
b45e9183bc tests: external origin updates
Update test for recent updates to support unalligned sizes
and extension of reduced volume.
2015-06-19 16:33:29 +02:00
Zdenek Kabelac
00d028fd77 log: flush stdout before print to stderr
Keep logging readable and fflush stdout before printing to stderr.
2015-06-19 16:33:20 +02:00
Zdenek Kabelac
3173442984 lvm: move hyphen mangling code
Relocate hyphen code from lvm main into lvm_run_command()
so all command and library user will have it.

Update WHATS_NEW with missing changes.
2015-06-19 09:51:48 +02:00
Zdenek Kabelac
438a65dfdb display: drop allocation from display_lvname
Use of display_lvname() in plain log_debug() may accumulate memory in
command context mempool. Use instead small ringbuffer which allows to
store cuple (10 ATM) names so upto 10 full names can be used at one.

We are not keeping full VG/LV names as it may eventually consume larger
amount of RAM resouces if vgname is longer and lots of LVs are in use.

Note: if there would be ever needed for displaing more names at once,
the limit should be raised (e.g. log_debug() would need to print more
then 10 LVs on a single line).
2015-06-18 18:50:37 +02:00
Zdenek Kabelac
a3e0d830bd thin: support unaligned size of external origin and thin pool
With thin-pool kernel target module 1.13 it's now support usage of
external origin with sizes which are not 'alligned' with chunk size
of thin-pool.

Enable lvm2 support for this and also fix reporting of data_percent
usage for case sizes are not alligned.
2015-06-18 18:50:36 +02:00
Zdenek Kabelac
6f2a617c31 thin: drop limitation for extension of reduced thin volume
Drop check which has prevented resize of reduce thin volume with
external origin. User is supposed to use 'zeroing' to get 'clean'
chunks.
2015-06-18 18:48:59 +02:00
Zdenek Kabelac
69132f55ea libdm: add dm_tree_node_set_thin_pool_read_only
Support thin-pool tree node with activation in read-only mode.
(Native kernel API).
2015-06-18 15:15:39 +02:00
David Teigland
fd1376ebef libdaemon: move compare_config to lib
so it can be used elsewhere.
2015-06-17 13:07:52 -05:00
Peter Rajnoha
0a203070f5 cleanup: missing target_type check in device_is_usable filter 2015-06-17 14:27:48 +02:00
Peter Rajnoha
5577f2f4f0 cleanup: || instead of |
More efficient with same result here.
2015-06-17 14:12:58 +02:00
Peter Rajnoha
1e6a926e85 filter: filter-usable: consider snapshot and origin LV as unusable if its component is suspended
Note that this is just a quick fix and it needs more robust fix to
encompass any combination, not just the (old) snapshot one!

This started with this report:
  https://bugzilla.redhat.com/show_bug.cgi?id=1219222

If we have devices/ignore_suspended_devices=1 set based on which we
filter out suspended devices as unusable (or if we ignore suspended
devices by force, e.g. during lvconvert called from dmeventd) and
when we have snapshot and snapshot origin devices in the play, we
need to look at their components unerneath (*-real and *-cow) to
check if they're not suspended. If they are, the snapshot/snapshot
origin is not usable as well and hence it needs to be filtered out
by filter-usable.c code which does suspended device filtering.

Not going into much details here, more details are in the bugzilla
mentioned above. However, this is a quick fix since snapshot
and this exact situation is not the only one. So this is
something that needs to be revisited and fixed properly
with full dm tree and checking the whole stack to state
whether the device at the very top is usable or not.
2015-06-17 13:37:53 +02:00
Peter Rajnoha
a9bc53d5f3 config: fix some settings incorrectly marked as CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED and causing segfault
This patch fixes segfault which was caused by incorrectly marking some
settings CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED - the
ones which have NULL default value, hence they're really undefined.
A regression caused by a98ceceb1d.

For example:

$ lvmconfig log/file
file="/a"

Before this patch:

$ lvmconfig --type diff
Segmentation fault (core dumped)

With this patch applied:

$ lvmconfig --type diff
log {
	file="/a"
}

The same applies for these settings:

  log/activate_file
  global/library_dir
  global/system_id_file
  <disk_area>/disk_area_id

There were also other settings with NULL default value and marked as
CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED, but they were
cfg_array config settings where the NULL value was not causing segfault
(NULL == empty array).
2015-06-17 13:34:31 +02:00
David Teigland
da1f887060 Add a global get_cmd_name()
Which returns the string set by set_cmd_name().
2015-06-16 15:13:10 -05:00
David Teigland
e043e03cd8 lv_refresh: move the bulk of the function into lib
So that it can be used from other lib code.
2015-06-16 13:38:40 -05:00
David Teigland
3d9957e3dd man vgchange lvchange: mention activation option s
and improve the existing text about existing
activation options.
2015-06-16 13:28:07 -05:00
David Teigland
857296c823 man lvm: mention hyphens in option names 2015-06-16 10:33:01 -05:00
David Teigland
d5adec1056 Add the 's' activation mode
Just as 'e' means activation with an exclusive lock,
add an 's' to mean activation with a shared lock.

This allows the existing but implicit behavior of '-ay'
of clvm LVs to be specified explicitly.  For local VGs,
asy simply means ay, just like aey means ay.

For local VGs, ay == aey == asy

For clvm VGs,  ay == asy, aey == aey, asy == asy
2015-06-16 10:18:16 -05:00
David Teigland
1f318dbcee Ignore hyphens in long option names
The hyphens are removed from long option names before
being read.  This means that:

- Option name specifications in args.h must not include hyphens.
  (The hyphen in 'use-policies' is removed.)

- A user can include hyphens anywhere in the option name.
  All the following are equivalent:
  --vgmetadatacopies,
  --vg-metadata-copies,
  --v-g-m-e-t-a-d-a-t-a-c-o-p-i-e-s-
2015-06-16 09:35:52 -05:00
David Teigland
7fe5e4010c xlate: add new variants
New variants use the clearer function names from the kernel.
2015-06-16 09:30:14 -05:00
David Teigland
ce18fb61c0 lvmcache: mention lvconvert --cachemode
for changing the cache mode on an existing LV.
2015-06-15 14:30:58 -05:00
Zdenek Kabelac
e7eb5b0696 debug: better tracing messages
Enhance traced output.
2015-06-15 14:48:06 +02:00
Zdenek Kabelac
9a06ae7b35 libdm: better debug message
Print reason for failing ioctl if thin pool message fails.
2015-06-15 14:48:04 +02:00
Zdenek Kabelac
ac6b355978 cleanup: drop double const
Second const is unneeded.
Also always create whole array with MAX elements.
2015-06-15 14:46:44 +02:00
Zdenek Kabelac
edbdbddfb6 dmeventd: better debug
Avoid using 'static' variable within threaded environmnent for debuging.
2015-06-15 14:46:44 +02:00
Zdenek Kabelac
3d5f7f90c8 dmeventd: drop stack 2015-06-15 14:46:44 +02:00
Zdenek Kabelac
9da07f1d3e dmeventd: drop pthread_cancel
Drop unused pthread canceling as well as DEBUG printing in signal
handler.
2015-06-15 14:46:44 +02:00
Alasdair G Kergon
f715fefe31 post-release 2015-06-12 21:42:57 +01:00
Alasdair G Kergon
2c64762a40 pre-release 2015-06-12 21:40:56 +01:00
Petr Rockai
9c0049b1ce test: Ensure that outdated PVs are wiped just once. 2015-06-10 16:27:59 +02:00
Petr Rockai
632dde0cbc metadata: When outdated PVs are wiped, notify lvmetad about the fact. 2015-06-10 16:27:12 +02:00
Petr Rockai
c78b6f18d4 metadata: Reject lvmetad metadata extensions when reading from disk. 2015-06-10 16:25:57 +02:00
Petr Rockai
4f91ad64c3 lvmetad: Make it possible to clear the outdated PVs list for a VG. 2015-06-10 16:18:57 +02:00
Petr Rockai
756d027da5 metadata: Explain the pvs_outdated field in struct volume_group. 2015-06-10 16:17:45 +02:00
David Teigland
fd29c7f3a1 lvmetad, lvmpolld: remove DL_LIBS from Makefile
and rdynamic.  They are not needed.
2015-06-08 11:48:22 -05:00
Ondrej Kozina
7c31293221 lvmetad.c: internal err on modifying global handle with open connection
lvmetad_init() should not be called with open connection to the daemon.
Doing so is considered to be an internall error within lvm2 code.

Such coincidence can't occur within current code. Let's assure us it won't
ever happen.
2015-06-08 16:01:40 +02:00
Ondrej Kozina
b89ad7e2d4 lvmetad.h: rephrase API descriptions
Some of descritpions were misleading at least. Some were completely
off the reality.

lvmetad_init doesn't re-establish or initialise a connection
lvmetad_active and lvmetad_connect_or_warn can do so.
2015-06-08 16:01:32 +02:00
David Teigland
3225f8d175 man: lvmthin chunk and metadata sizes
Clear some stale information, and give a suggestion to use
a metadata size of 1GiB.
2015-05-27 15:53:01 -05:00
Zdenek Kabelac
778b66a719 tests: check for idle only for raid type 2015-05-27 11:59:10 +02:00
Zdenek Kabelac
6e4c04b1be lvmetad: missing wrapper for lvmetad less compilation 2015-05-27 11:44:33 +02:00
Zdenek Kabelac
d3abc25e76 tests: check for clmvd socket
A bit hacky since it expects PID_DIR == DEFAULT_RUN_DIR for now,
just to check whether it fixes startup clvmd sync problem.
2015-05-27 11:10:43 +02:00
Zdenek Kabelac
f0a4955eb1 tests: better check for array in sync
Update check for raid array being in sync - getting somewhat complex.
It's another way to fight with problems in:
https://bugzilla.redhat.com/show_bug.cgi?id=1210637
2015-05-27 11:10:43 +02:00
Zdenek Kabelac
c254743ef3 tests: drop debug print 2015-05-27 11:10:43 +02:00
Zdenek Kabelac
d1531ab26d cleanup: gcc warn fix, don't hide pvs() 2015-05-27 11:10:43 +02:00
Ondrej Kozina
1aba262edb lvmpolld: terminate error message with a dot and LF 2015-05-27 11:10:43 +02:00
Ondrej Kozina
f0268585dd WHATS_NEW: various updates
commit c069aff21b
commit 8af5f54824
2015-05-26 16:28:04 +02:00
Ondrej Kozina
8af5f54824 dmsetup: zero errno in before strtoul call
Testing errno value without explicitly setting to
zero in before the strtoul call may lead to
unexpected failures.
2015-05-26 16:27:10 +02:00
Ondrej Kozina
c069aff21b lvmpolld: zero errno in before strtoul call
Testing errno value without explicitly setting to
zero in before the strtoul call may lead to
unexpected failures.
2015-05-26 16:27:03 +02:00
Ondrej Kozina
a72a805896 lvconvert.c: fix whitespace mess 2015-05-26 16:26:57 +02:00
Alasdair G Kergon
eeb498627c libdm: Add dm_task_get_errno to return ioctl errno.
There are reports of unexplained ioctl failures when using dmeventd.
An explanation might be that the wrong value of errno is being used.

Change libdevmapper to store an errno set by from dm ioctl() directly
and provide it to the caller through a new dm_task_get_errno() function.

[Replaced f9510548667754d9209b232348ccd2d806c0f1d8]
2015-05-26 15:13:49 +01:00
Ondrej Kozina
b244fffc18 WHATS_NEW: update
update for commit: f8bf641095
2015-05-25 10:48:53 +02:00
Ondrej Kozina
da20e0c507 tests: add test for pvscan --cache --background
regression test for a segfault in pvscan --cache --background
bug fixed by commit:
f8bf641095
2015-05-25 10:48:45 +02:00
Ondrej Kozina
f8bf641095 lvmetad.c: ignore lvmetad global handle on disconnect
do not unset lvmetad global handle on disconnect. This is
hotfix for issue described in:
https://www.redhat.com/archives/linux-lvm/2015-May/msg00008.html

Reported-by: Christian Hesse <list@eworm.de>
2015-05-25 09:11:04 +02:00
Lidong Zhong
9d558fbcc2 lvconvert: change how to get failed mirrors number
Commit  b00711e312 improperly
convert _area_missing() replacment and moved check for
AREA_PV seg_type() into same if() section.

Signed-off-by: Lidong Zhong <lzhong@suse.com>
2015-05-22 15:35:36 +02:00
Peter Rajnoha
ba68aed836 scripts: activation generator: do not use --sysinit if lvmpolld used
If lvmetad is not used, we generate lvm2-activation{-early,-net}.service
systemd services to activate any VGs found on the system. So far we used
--sysinit during this activation as polling was still forked off of the
lvm activation command.

This has changed with lvmpolld - we have proper lvmpolld systemd
service now (activated via its socket unit). As such, we don't need
to use --sysinit anymore during activation in systemd environment
as polling was the only barrier to remove the need for --sysinit.
2015-05-21 12:20:30 +02:00
Ondrej Kozina
6d998aa13d lvmpolld-client.c: debug print when querying progress 2015-05-21 11:20:21 +02:00
Ondrej Kozina
01b06cb71b polldaemon.c: modify log levels in report_progress
There's a race when asking lvmpolld about progress_status and
actually reading the progress info from kernel:

Even with lvmpolld being used we read status info from
LVM2 command issued by a user (client side from lvmpolld perspective).
The whole cycle may look like following:

1) set up an operation that requires polling (i.e. pvmove /dev/sda)
2) notify lvmpolld about such operation (lvmpolld_poll_init())
3) in case 1) was not called with --background it would continue with:
4) Ask lvmpolld about progress status. it may respond with one of:
   a) in_progress
   b) not_found
   c) finished
   d) any low level error

5) provided the answer was 4a) try to read progress info from polling LV
(i.e. vg00/pvmove1). Repeat steps 4) and 5) until the answer is != 4a).

And now we got into racy configuration: lvmpolld answered with in_progress
but it may be the that in_between 4) and 5) the operation has already
finished and polling LV is already gone or there's nothing to ask for.
Up to now, 5) would report warning and it could print such warning many
times if --interval was set to 0.

We don't want to scary users by warnings in such situation so let's just
print these messages in verbose mode. Error messages due to error while
reading kernel status info (on existing, active and locked LV) remained
the same.
2015-05-21 11:20:11 +02:00
Petr Rockai
43224f22e4 format_text: Parse (optional) outdated_pvs section in VG metadata. 2015-05-20 19:46:14 +02:00
Petr Rockai
e8d00e0687 lvmetad: Set up lvmcache & PV structs for outdated_pvs. 2015-05-20 19:46:14 +02:00
Petr Rockai
55f3369692 lvmetad: Provide entire pvmeta sections for outdated_pvs. 2015-05-20 19:46:14 +02:00
Petr Rockai
611c8b6d29 metadata: Add pvs_outdated to struct volume_group.
This is a list of PVs that should have their MDAs wiped because they carry
outdated metadata (that used to belong to the VG they are attached to).
2015-05-20 19:46:14 +02:00
Petr Rockai
5435346052 metadata: Factor _wipe_outdated_pvs() PVs out of _vg_read(). 2015-05-20 19:46:13 +02:00
Petr Rockai
1562cd7320 lvmetad: Attach an outdated_pvs list to vg_lookup replies. 2015-05-20 19:46:13 +02:00
Petr Rockai
da1527d65d lvmetad: Clear the vgid_to_outdated_pvs hash on shutdown. 2015-05-20 19:46:13 +02:00
Petr Rockai
925268794f lvmetad: Maintain info about outdated PVs. 2015-05-20 19:46:13 +02:00
Zdenek Kabelac
f3c7bd4004 makefiles: use bash subshell
Avoid using  make's $(shell invocation since the eval order is
then somewhat different and use $$(  subshell.

This also fixes a problem when more then one symbol is found,
since target shell has been given separate word list
so the 'R' assignment would need "" around it.
2015-05-20 09:33:51 +02:00
Zdenek Kabelac
682e0c898e configure: fix missing [ 2015-05-20 09:32:03 +02:00
Ondrej Kozina
788e4c5423 WHATS_NEW: various updates 2015-05-19 21:01:24 +02:00
Ondrej Kozina
e6b5eb88f2 polldaemon.c: do not report error when LV not found
currently in wait_for_single_lv() fn trying to poll missing pvmove LV
is considered success. It may have been already finished by another
instance of polldaemon. either by another forked off polldaemon
or by lvmpolld.

Let's try to handle the mirror conversion and snapshot merge the same
way.
2015-05-19 20:56:46 +02:00
David Teigland
cf5b4a2286 lvconvert.c: drop get_vg_lock_and_logical_volume fn 2015-05-19 20:56:32 +02:00
David Teigland
f400f9db19 pvmove.c: code cleanup 2015-05-19 20:56:24 +02:00
David Teigland
7a8ce8dbf7 polldaemon: remove get_copy_vg and get_copy_lv wrappers
These wrappers have been replaced by direct calls
to vg_read() and find_lv() in previous commits.

This commit should have no functional impact since
all bits were already unreachable.
2015-05-19 20:56:15 +02:00
Ondrej Kozina
6fba37777c polldaemon.c: call find_lv directly 2015-05-19 20:56:07 +02:00
David Teigland
08114840ca lvconvert.c: call find_lv directly 2015-05-19 20:55:57 +02:00
David Teigland
0d300b70f9 polldaemon.c: call vg_read directly
replace calls in wait_for_single_lv() and report_progress() fns
2015-05-19 20:55:50 +02:00
David Teigland
15939e3435 lvconvert.c: call vg_read directly 2015-05-19 20:55:41 +02:00
David Teigland
131c657735 pvmove.c: call vg_read directly 2015-05-19 20:55:31 +02:00
Ondrej Kozina
e5e0e22022 polldaemon: move dev_close_all out of poll_get_copy_vg
let's call dev_close_all() only before we're about to 'sleep'
for at least one second during the polling.

(it's questionable whether to call dev_close_all() at all in
polldaemon code. Natural extension would be to drop it completely)
2015-05-19 20:55:22 +02:00
David Teigland
e27182249a tests: add test for duplicate pvs 2015-05-19 11:02:53 -05:00
Zdenek Kabelac
dc49e1cde0 configure: update localedir
Previous patch incorrectly skipped replace of @LOCALEDIR@.

The standard option is --localedir  so use --with-localedir
as backward compatible option and set localedir if it's not
yet been set (if the could ever happen).

Use double-eval to translate $datarootdir to $prefix to real dir.
2015-05-18 18:48:18 +02:00
Zdenek Kabelac
aa2d39c2ca configure: LOCALEDIR needs evaluated value
Also fix typo.
2015-05-18 13:06:34 +02:00
Zdenek Kabelac
0cb9df3cec tests: fix calcucaltion
Code works properly.
2015-05-18 12:45:43 +02:00
Zdenek Kabelac
caaca15854 tests: thin_restore not needed
Few more test which could live without thin_restore.
2015-05-18 12:45:42 +02:00
Zdenek Kabelac
62ac80c8fa makefiles: drop LVM_SHARED_PATH
We already have LVM_PATH define used everywhere else
to access LVM binary so stay with one name.
2015-05-18 12:45:42 +02:00
Zdenek Kabelac
30c3bbcd9e makefiles: better clean
More exact clean of library exported symbols files.

Also use $(firstword) test to check for empty string
so 'make clean' has now cleaner condensed look.

Clean also created include links.
2015-05-18 12:45:42 +02:00
Zdenek Kabelac
1bed578535 makefiles: use := for shell calls 2015-05-18 12:45:42 +02:00
Zdenek Kabelac
bf2b1986c2 makefiles: use single target
Possibly  easier to follow - to have just a single dependency line
and use  if() within rule.

Also replace $(words) with $(firstword) which is more commonly used.
2015-05-18 12:45:42 +02:00
Zdenek Kabelac
fe00b163d6 configure: move DEFS to configure.h 2015-05-18 12:43:25 +02:00
Zdenek Kabelac
76cc477fba tests: no warn if test does not need thin_repair
Set LVM_TEST_THIN_REPAIR_CMD to /bin/false for test which
doesn't need it.

This way - even if on the system there is no such tool present,
test will not result with warning about missing tool.

Also remove from Makefile settings of TEST vars which are set in
through /lib/paths  - this also allows to override them in test.
2015-05-17 20:24:36 +02:00
Alasdair G Kergon
2fca6cdeb3 post-release 2015-05-15 23:28:47 +01:00
Alasdair G Kergon
0300730cc9 pre-release 2015-05-15 23:19:29 +01:00
Zdenek Kabelac
9e102ecbd9 mirror: use proper 64bit constants
ed2a08bf25 missed to use 64bit
constants.
2015-05-15 22:53:12 +02:00
Zdenek Kabelac
190e91231c spec: new man page 2015-05-15 21:31:28 +02:00
David Teigland
463c86008b config: remove UNDEFINED from cache_pool_cachemode
Replace UNDEFINED with COMMENTED because the code
requires a value to be returned from the config.
2015-05-15 14:24:23 -05:00
David Teigland
850606e9fa config: remove UNDEFINED from thin_pool_discards and thin_pool_zero
Replace UNDEFINED with COMMENTED for these two since
undefined seems to break things.
2015-05-15 14:03:53 -05:00
Ondrej Kozina
77fa958c1e lvmpolld.8.in: man page rewrite
- add client functionality
- fill in long option variants
2015-05-15 20:33:47 +02:00
Ondrej Kozina
d4317c0406 lvmpolld: don't return success on invalid option 2015-05-15 20:33:40 +02:00
Ondrej Kozina
d34de2d912 lvmpolld: add long option variants for all short ones 2015-05-15 20:33:34 +02:00
Ondrej Kozina
b91e1ea95e lvmpolld: introduce client functionality
as of now lvmpolld works as client utility for
querying running instance of lvmpolld server
on metadata, state, etc.

Currently the only request implemented is the '--dump'.
It prints out full lvmpolld state (mimics lvmdump -p command).
2015-05-15 20:33:27 +02:00
Ondrej Kozina
04c77bd886 pvmove.c: relocate id components extraction
we don't want to fail properly set pvmove after metadata
update. failure to copy id components could end with dangling
mirror moving PV segments but no monitoring from lvmpolld or
classical polldaemon.
2015-05-15 20:33:21 +02:00
Ondrej Kozina
67657f1ff9 lvpoll.c: harden the checks for proper LV name
lvpoll now process passed LV name properly. It respects
LVM_VG_NAME env. variable and is able to process LV name
passed in various formats:

- VG/LV
- LV name only (with LVM_VG_NAME set)
- /dev/mapper/VG-LV
- /dev/VG/LV
2015-05-15 20:33:10 +02:00
Ondrej Kozina
ba120640b2 lvpoll.c: replace arg_count with arg_is_set
didn't need to count the occurence but check if set
2015-05-15 20:33:04 +02:00
David Teigland
0d15217a6c example.conf.in: apply previous improvements to example.conf 2015-05-15 20:32:58 +02:00
David Teigland
9f0095fa2c config_settings.h: improve lvmpolld config description 2015-05-15 20:32:51 +02:00
Ondrej Kozina
bf19bbbd55 lvm.8.in: add reference to lvpoll built-in command 2015-05-15 20:32:39 +02:00
Ondrej Kozina
4f1c1f3d6b lvmdump.8.in: describe lvmpolld related option 2015-05-15 20:32:32 +02:00
Ondrej Kozina
e93058ed81 commands.h: reorder lvpoll options 2015-05-15 20:32:25 +02:00
Ondrej Kozina
ce3c457dcc lvm-lvpoll.8.in: man page for built-in command 2015-05-15 20:32:16 +02:00
Ondrej Kozina
239fb95fde lvmpolld.8.in: hide origin of lvmpolld man page
:)
2015-05-15 20:32:08 +02:00
Ondrej Kozina
6cdd153b89 lvmpolld-client.c: explain known return codes
lvmpolld returns few well known return codes. Explain
these to users and suggest reading lvmpolld log files
for more details
2015-05-15 20:31:54 +02:00
Ondrej Kozina
333fdfd4b6 lvmpolld: label known return codes
so that lvmpolld-client can decode and describe these
return codes properly
2015-05-15 20:31:48 +02:00
Ondrej Kozina
8d594c409c libdaemon: fprintf(stderr...) -> ERROR()
log data structures are ready. so why not pass
error messages through ERROR()
2015-05-15 20:31:42 +02:00
Ondrej Kozina
f653b123cf libdaemon: suggest daemon already running
when dm_creat_lockfile fails, it's probably due to
another instance is holding the same pid file...
2015-05-15 20:31:36 +02:00
David Teigland
c0d30da609 config: thin_pool_chunk_size_policy should be commented
It is commented in existing example.conf, so leave
that as it was.
2015-05-15 11:43:56 -05:00
David Teigland
b7db994aba config: thin_pool_chunk_size_policy is not undefined
The default policy setting does not depend on any
system/kernel values.
2015-05-15 11:37:16 -05:00
Zdenek Kabelac
03aec36fc0 man: missed y|n for wipesignatures 2015-05-15 17:44:52 +02:00
David Teigland
a98ceceb1d config: add comments to match current example.conf
Use CFG_DEFAULT_COMMENTED and CFG_DEFAULT_UNDEFINED to
replicate the existing comments in example.conf.

Fix host_list to be cfg_array.

UNDEFINED is only used if the value depends on other
system/kernel values outside of lvm.  The most common
case is when dm-thin or dm-cache have built-in default
settings in the kernel, and lvm will use those built-in
default values unless the corresponding lvm config setting
is set.

COMMENTED is used to comment out the default setting in
lvm.conf.  The effect is that if the LVM version is
upgraded, and the new version of LVM has new built-in
default values, the new defaults are used by LVM unless
the previous default value was set (uncommented) in lvm.conf.
2015-05-15 10:13:17 -05:00
Zdenek Kabelac
797c18d543 libdm: new dm_task_get_info with internal_suspend
Introduce new implmentation of dm_task_get_info() function
with support for reading internal_suspend.
.
This time it is done in a 'versioned' way.

We keep the old fashion dm_task_get_info(Base) to implement
the old behavior of 1.02.95 libdm code.

libdm version 1.02.96 introduced 'macro' wrapper
dm_task_get_info_with_deferred_remove with new implementation
of dm_task_get_info() - we cannot do anything else then to
provide compatible version of this symbol.

Now in version 1.02.97 we add new versioned implementation of
dm_task_get_info(DM_1_02_97) symbol.

This has the effect that i.e. rpm build will finaly resolve proper
dependency on a new symbol - so it will be no longer possible,
to build a new binary and use old library
(rpm -q --provides will show libdevmapper.so.1.02(DM_1_02_97)(64bit))

Also the history is now tracked. If a new function is added (or
reimplemented), it needs to be placed in proper file,
so it could be exported with right versioning symbol.
File .exported_symbols.Base should and any existing older DM
should be treated as read-only after a release.

Also - only libdm has been currently enhanced with versioned .Base
file, as soon as other libs (liblvm, libdevmapper-event) needs changes
they should also get their exported symbol files - meanwhile
make.tmpl handles both cases.
2015-05-15 16:48:22 +02:00
David Teigland
3f10dfd6c7 lvm.conf: add more information to the comment header 2015-05-14 10:52:24 -05:00
David Teigland
8081ee1440 config: description can refer to etc location 2015-05-14 09:47:42 -05:00
David Teigland
cf93fe39e3 config: avoid configurable description text
It's just simpler to avoid configurable values in
the description text by rewording to avoid them.
2015-05-14 09:25:48 -05:00
Zdenek Kabelac
4931d0132c nix: socat for f18, nc for f17
Use common f17_f18 and add extras for f17 and f18
2015-05-14 15:01:01 +02:00
Zdenek Kabelac
64a9990977 makefiles: disable po file targes
po targets are not correct - so disable them for now.
2015-05-14 14:19:40 +02:00
Zdenek Kabelac
a929606f2b makefiles: use srcdir
Use -I$(srcdir) as that's what we really want here.
For %.pot use all includes.
2015-05-14 14:19:22 +02:00
Zdenek Kabelac
679f1a9e29 nix: drop util-linux
Doesn't appear on centos???
2015-05-14 11:45:37 +02:00
Zdenek Kabelac
4f375d03dd nix: add more packages 2015-05-14 11:42:33 +02:00
Zdenek Kabelac
f3a19fbe13 spec: package old sysv initscript for lvmpolld 2015-05-14 11:27:52 +02:00
Zdenek Kabelac
64b40c5554 nix: add pkgconfig
Install for better config
2015-05-14 11:15:56 +02:00
Zdenek Kabelac
a42c1c5728 tests: respect @CONFDIR@/machine-id
Obtain location of machine-id.

NOTE: lvmconfig cannot dump 'life' value - should be fixed.
2015-05-14 10:52:55 +02:00
Zdenek Kabelac
57a16abe2c tests: do not use |&
Bash 3.2  doesn't understand this syntax (i.e. RHEL5).
And it's even better - reports syntax error and return success.
2015-05-14 10:52:55 +02:00
Zdenek Kabelac
1406aba8da nix: socat is quite new package
Install 'nc' on older systems.
Test suite handles both.
2015-05-14 10:52:55 +02:00
Zdenek Kabelac
b7d80806b6 conf: system_id_source is referencing CONFDIR
Since we allow to configure /etc in configure and compile-in
dir for /etc we need to properly advertise this location later.
2015-05-14 10:52:55 +02:00
Zdenek Kabelac
6fb2552ef4 makefiles: protect CFLAGS
When CFLAGS and LDFLAGS are passed into - protect them,
and avoid even recursive subdir 'extension' of them.
2015-05-14 00:19:33 +02:00
Zdenek Kabelac
a2c9ede6b3 makefiles: assign vars before include
Before we include, set INCLUDE and TARGETS.
Extend CFLAGS after include.
2015-05-14 00:19:33 +02:00
Zdenek Kabelac
b184d7a2ca makefiles: drop DEBUG mangling
DEBUG is already set through make.tmpl.
2015-05-14 00:19:33 +02:00
Zdenek Kabelac
3fa66d1036 configure: set optimize flags when CFLAGS is unset
If we are given CFLAGS - preserve user's request and avoid placing
just -O2 there.
2015-05-14 00:19:33 +02:00
Zdenek Kabelac
f207a6d353 configure: preserve CXX/CFLAGS
AC_PROG_CC
AC_PROG_CXX

Does not preserve CFLAGS CXXFLAGS
2015-05-14 00:19:32 +02:00
Zdenek Kabelac
5e38b8439a nix: fix socat package name 2015-05-14 00:19:32 +02:00
Zdenek Kabelac
a8fc483ca4 makefiles: use fullpath when in assign
We need to put full path right in the assign moment,
otherwise command:

make rpm rpmbuild=/my/tmp/dir

cannot work as one would have expected.
2015-05-14 00:19:32 +02:00
Zdenek Kabelac
7bd1559db6 makefiles: testclient is not valid target 2015-05-14 00:19:32 +02:00
Zdenek Kabelac
ea846f1ca2 makefiles: drop way too generic deps 2015-05-14 00:19:32 +02:00
Alasdair G Kergon
02e10f4ccd libdaemon: Fix socket reuse error paths.
Invert S_ISSOCK validation.
Fail instead of replacing a symlink with a new socket.
After failure, skip calling fcntl with invalid socket_fd.
2015-05-13 13:42:09 +01:00
Zdenek Kabelac
cc560b75aa configure: start to use AS_IF 2015-05-13 13:19:36 +02:00
Zdenek Kabelac
007ac0d36f nix: more base packages 2015-05-13 13:19:35 +02:00
Zdenek Kabelac
1b43d63368 spec: packaging polld
Package lvmpolld

Drop legacy SysV init subpackage.
2015-05-13 13:18:59 +02:00
Ondrej Kozina
d5cef7413f lvmpolld: dump cleanup 2015-05-12 17:17:07 +02:00
Ondrej Kozina
8da7915222 lvmpolld-client.c: use lvmpolld debug class where appropriate 2015-05-12 17:17:00 +02:00
Ondrej Kozina
2ec51e6185 tests: remove forgotten -vvvv option 2015-05-12 17:16:54 +02:00
Ondrej Kozina
257f7febc7 libdm-common.c: remove trailing whitespace 2015-05-12 17:16:49 +02:00
Ondrej Kozina
24a92e08c0 lvmpolld-client.c: be more specific about fallback on error
if client fails to contact lvmpolld it fallbacks to using classical
polldaemon. Be more specific and give some hints to users what went
possibly wrong
2015-05-12 17:16:43 +02:00
Ondrej Kozina
c3d351ec9b new debug class for lvmpolld client code 2015-05-12 17:16:37 +02:00
Ondrej Kozina
e213aa17bd lvmpolld.8.in: clarify the timeout parameter
Remove references to systemd native service. Now
the libdaemon supports shutdown on idle no matter
the init process implementation installed.
2015-05-12 17:16:31 +02:00
Ondrej Kozina
cdb7ce6f17 libdaemon: shutdown on idle also in non-systemd environment 2015-05-12 17:16:24 +02:00
Zdenek Kabelac
100daa7fd8 tests: ndev by default 2015-05-12 12:40:37 +02:00
Zdenek Kabelac
68e8030fe7 configure: spec.inc is generated at build
Collect all needed info at runtime for spec.inc
2015-05-12 12:40:37 +02:00
Zdenek Kabelac
13e87045fd makefiles: use LN_S 2015-05-12 12:40:37 +02:00
Zdenek Kabelac
9c2a6de68f makefiles: runtime spec.inc
Support  CLEAN_DIRS
Var for rpmbuilddir
Use LN_S
Generate spec.inc at runtime for 'make rpm'.
2015-05-12 12:40:37 +02:00
Ondrej Kozina
f5199a1cbd tests: remove forgotten set -v in aux 2015-05-11 19:08:19 +02:00
Ondrej Kozina
d758115786 lvmpolld: by default spawn lvpoll cmd with -An 2015-05-11 19:08:13 +02:00
Ondrej Kozina
5cfd7074af lvmpolld: set use counters properly in lvmpolld_store
set active_polling_count to zero in pdst_init fn
2015-05-11 19:08:00 +02:00
Ondrej Kozina
5e0a8fa981 lib/polldaemon.h: remove trailing whitespace 2015-05-11 19:07:55 +02:00
Ondrej Kozina
2bbf0425e7 lvmdump.sh: print out lvmpolld service status 2015-05-11 19:07:47 +02:00
Zdenek Kabelac
5420edd56e tests: split flavours
Remove duplicate flavour-udev-lvmetad-lvmpolld
and put them 1-per-line.
2015-05-11 17:31:09 +02:00
Zdenek Kabelac
e28ff7e0fc nix: now some files are generate so keep them
more tweaks ahead
2015-05-11 17:31:09 +02:00
David Teigland
d748b3455d vgimport: fall back when lvmetad is not running
If lvmetad is configured, but not running,
vgimport would not fall back and run without
lvmetad, but would report an error about
requiring lvmetad.
2015-05-11 09:28:47 -05:00
Zdenek Kabelac
3eb2d4d2ce tests: typo in aux
Ooops editor grabbed q in test.
2015-05-11 16:14:24 +02:00
Zdenek Kabelac
20e9ec3583 makefiles: move clean
Move clean: target below, so it's not a default target to execute.
2015-05-11 16:08:58 +02:00
Zdenek Kabelac
62e7a6ca1a makefile: cleanup after build
Provide cleaning rules for build dir and release tgz.
2015-05-11 15:53:46 +02:00
Zdenek Kabelac
fabc19b73c tests: disable lvmetad and lvmpolld
Since now we enable those by default when compiled with those daemons,
explicitely disable them in tests when needed.

Alphabetically sort configurables.
2015-05-11 15:53:21 +02:00
Zdenek Kabelac
b5b3ad14a8 spec: now generated 2015-05-11 14:40:54 +02:00
Zdenek Kabelac
7de6153395 makefiles: dist and rpm target
Basic support for upstream 'build' of rpm packages.
Make spec file generated.

2 new simple targets:

make dist  - create LVM2.MAJOR.MINOR.PATCHLEVEL.tgz  from git files.

make rpm   - some generic rpmbuilder using spec files.
             Create packages in build/ subdir.
             DO NOT USE created rpms in any distribution!
2015-05-11 14:36:58 +02:00
Zdenek Kabelac
ed8ea6cb2f spec: writable instalation
rpmbuild needs writable binaries (for debug symbol extraction)
2015-05-11 14:36:31 +02:00
Zdenek Kabelac
725136b57e configure: use_lvmetad/polld configurable
Configure provides proper settings for
use_lvmetad  and use_lvmpolld  conf setttings.

When the build of polld & lvmetad, these settings
are enabled by default unless explicitelly disabled
with --disable-use-lvmetad/--disable-use-lvmpolld.
2015-05-11 14:36:10 +02:00
Peter Rajnoha
1806694928 metadata: use log_debug_metadata instead of general log_debug for BA debug messages 2015-05-11 11:07:53 +02:00
Zdenek Kabelac
e3ccf98023 tests: missed conversion
Assuming it should test same number as other functions.
2015-05-09 09:17:26 +02:00
Zdenek Kabelac
abcab54cca tests: avoid clobering dmesg
Restore old harness access to /dev/kmsg.
2015-05-09 09:17:26 +02:00
Zdenek Kabelac
3d845e492a cleanup: drop extra test for NULL
vg cannot be NULL here - it's been already used in the code above.
2015-05-09 09:17:26 +02:00
Zdenek Kabelac
e047f04394 cleanup: remove extraneous parentheses 2015-05-09 09:17:26 +02:00
Ondrej Kozina
e587b0677b lvmpolld: Add standalone polldaemon.
See doc/lvmpolld_overview.txt
2015-05-09 00:59:18 +01:00
David Teigland
be23fae488 lvmcache: set device in label when switching devs V2
This is an alternative/equivalent to commit
ca67cf84df

The problem (wrong label->dev after a new preferred
duplicate device is chosen) was isolated to the lvmetad
case (non-lvmetad worked fine), and this fixes the problem
by setting the new label->dev in the lvmetad-specific
code rather than in the general lvmcache code.
2015-05-08 17:10:53 -05:00
David Teigland
ca67cf84df lvmcache: set device in label when switching devs
When using lvmetad, the reporter code was not reporting
the new preferred device because the new preferred dev
was not being set in the label struct.
2015-05-08 14:41:05 -05:00
Zdenek Kabelac
53aff9322e tests: better filter
Filter $PREFIX rather then just LVMTEST.
2015-05-08 21:00:10 +02:00
Zdenek Kabelac
1d832aef09 tests: missing vg 2015-05-08 21:00:10 +02:00
David Teigland
8e509b5dd5 toollib: avoid repeated lvmetad vg_lookup
In process_each_{vg,lv,pv} when no vgname args are given,
the first step is to get a list of all vgid/vgname on the
system.  This is exactly what lvmetad returns from a
vg_list request.  The current code is doing a vg_lookup
on each VG after the vg_list and populating lvmcache with
the info for each VG.  These preliminary vg_lookup's are
unnecessary, because they will be done again when the
processing functions call vg_read.  This patch eliminates
the initial round of vg_lookup's, which can roughly cut in
half the number of lvmetad requests and save a lot of extra work.
2015-05-08 11:44:55 -05:00
David Teigland
f25132b354 lvmcache: choose preferred device once
Once the preferred duplicate devices have been set in
lvmcache, don't attempt to pick preferred duplicates
again.
2015-05-08 11:44:49 -05:00
David Teigland
1dfedcc179 lvmcache: update lvmcache with alternate device
When there are duplicate PVs, and one device
replaces another in lvmcache, use label_read
to update lvmcache for the new device.
2015-05-08 11:28:59 -05:00
Zdenek Kabelac
cbdf514bbc debug: extra validation of passed segment
Always check if passed segment really is correct cache segment.
(Avoids derefernce of possibly NULL seg->pool_lv).
2015-05-08 15:15:11 +02:00
Zdenek Kabelac
29c709f591 debug: tracing error path 2015-05-08 15:15:10 +02:00
Zdenek Kabelac
eadebc3b61 debug: show sys errors 2015-05-08 15:15:10 +02:00
Zdenek Kabelac
ed2a08bf25 cleanup: use 64bit ulongs
Use 64bit arithmetics for all numbers (Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
5232fd13f3 cleanup: cast minor to dev_t
Let the arithmetic run with a single dev_t type (Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
b8dfd7a53d cleanup: indent mismatch
Aling break (Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
28f18404a7 cleanup: drop unneeded header file
Does not resolves any symbols (Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
3c46428fcd cleanup: drop unneeded int test
Testing int  region_size > INT32_MAX is always false
so drop the test (Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
950a21d58a format1: check for lvm1_system_id
As in the code above in this function continue to check for
lvm1_system_id pointer existance before dereferencing it
(Coverity).
2015-05-08 15:15:10 +02:00
Zdenek Kabelac
05934d2538 format_text: properly validate PV size for restore
Use 64bit arithmentic for PV size calculation (Coverity).

Also remove sector shift for compared PV size, since all
values are already held in sectors.

This fixes validatio of PV size when restoring PV
from vg metadata backup file.
2015-05-08 15:12:35 +02:00
Zdenek Kabelac
2cea1c1bd9 pvcreate: fix test for wiping status
Commit ed420fb691 changed
paramet wiped to be a pointer, but missed to switch
to test pointer dereferenced value and instead always
checked 'pointer'.
2015-05-08 13:36:39 +02:00
Zdenek Kabelac
bf5cb4af8e lvmcache: copy just 32bytes
Copy only bytes which fits.

vginfo->vgid  is  [ID_LEN + 1]
vgsummary->vgid has only [ID_LEN]

Reported by Coverity.
2015-05-08 13:31:59 +02:00
Alasdair G Kergon
87578b5d94 man: Fix recursive lvm-config man page. 2015-05-07 12:07:40 +01:00
Tony Asleson
6d35c69b06 Python: Improve lv property test coverage
Improve the python unit test case to cover all of the properties of a LV and
the properties of a LV segment.

In addition we also add a 'tag' to the lv so that we can retrieve it
using the 'lv_tags' property to ensure that this works as expected.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-05-06 08:51:05 -05:00
Tony Asleson
dc5190de74 lvm2app: Correct missing string properties
Synopsis: STR_LIST needs to be treated as STR for properties.

For any lvm property that was internally 'typed' as a string list we were failing
to return a string in the property API.  This was due to the fact that for the
properties to work the value needs to either be evaulated as a string or a
number.  This change corrects the macro used to build the memory array of
structures so that the string bitfield is set as needed to ensure that the value
is a string.

https://bugzilla.redhat.com/show_bug.cgi?id=1139920

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-05-06 08:51:04 -05:00
Tony Asleson
e8c11c7df0 python: Check for NULL value before constructing string property
When retrieving a property value that is a string, if the character pointer in C
was NULL, we would segfault.  This change checks for non-null before creating a
python string representation.  In the case where the character pointer is NULL
we will return a python 'None' for the value.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-05-06 08:51:04 -05:00
Tony Asleson
c21f1ba07a python: Build correct python value for numerical property
With the lvm2app C API adding the ability to determine when a property is
signed we can then use this information to construct the correct representation
of the number for python which will maintain value and sign.  Previously, we
only represented the numbers in python as positive integers.

Python long type exceeds the range for unsigned and signed integers, we just
need to use the appropriate parsing code to build correctly.

Python part of the fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=838257

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-05-06 08:51:04 -05:00
Tony Asleson
91f737383c lvm2app: Add signed numerical property values
Currently lvm2app properties have the following structure:

typedef struct lvm_property_value {
        uint32_t is_settable:1;
        uint32_t is_string:1;
        uint32_t is_integer:1;
        uint32_t is_valid:1;
        uint32_t padding:28;
        union {
                const char *string;
                uint64_t integer;
        } value;
} lvm_property_value_t;

which assumes that numerical values were in the range of 0 to 2**64-1.  However,
some of the properties were 'signed', like LV major/minor numbers and some
reserved values for properties that represent percentages.  Thus when the
values were retrieved they were in two's complement notation.  So for a -1
major number the API user would get a value of 18446744073709551615.  The
API user could cast the returned value to an int64_t to handle this, but that
requires the API developer to look at the source code and determine when it
should be done.

This change modifies the return property structure to:

typedef struct lvm_property_value {
        uint32_t is_settable:1;
        uint32_t is_string:1;
        uint32_t is_integer:1;
        uint32_t is_valid:1;
        uint32_t is_signed:1;
        uint32_t padding:27;
        union {
                const char *string;
                uint64_t integer;
                int64_t signed_integer;
        } value;
} lvm_property_value_t;

With this addition the API user can interrogate that the value is numerical,
(is_integer = 1) and subsequently check if it's signed (is_signed = 1) too.
If signed, then the API developer should use the union's signed_integer to
avoid casting.

This change maintains backwards compatibility as the structure size remains
unchanged and integer value remains unchanged.  Only the additional bit
taken from the pad is utilized.

Bugzilla reference:
https://bugzilla.redhat.com/show_bug.cgi?id=838257

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-05-06 08:51:04 -05:00
Ondrej Kozina
5bbf083cd1 tests: do not restart lvmetad when not necessary
overlooked pvmove-restart test during cleanup
2015-05-06 15:20:11 +02:00
Ondrej Kozina
9fc6b654f5 WHATS_NEW: update for recent changes
commits:
- bda26acf70
- 76a0dffe6f
2015-05-05 20:52:49 +02:00
Ondrej Kozina
7fca7f196d polldaemon: make wait_for_single_lv public
referenced by new lvpoll command after lvmpolld
gets merged.
2015-05-05 20:52:24 +02:00
Ondrej Kozina
81c038934c polldaemon: introduce _nanosleep function
querying future lvmpolld with zero wait time is highly undesirable
and can cause serious performance drop of the future daemon. The new
wrapper function may avoid immediate return from syscal by
introducing minimal wait time on demand.
2015-05-05 20:52:17 +02:00
Ondrej Kozina
76a0dffe6f polldaemon: refactor polling interfaces
Routines responsible for polling of in-progress pvmove, snapshot merge
or mirror conversion each used custom lookup functions to find vg and
lv involved in polling.

Especially pvmove used pvname to lookup pvmove in-progress. The future
lvmpolld will poll each operation by vg/lv name (internally by lvid).
Also there're plans to make pvmove able to move non-overlaping ranges
of extents instead of single PVs as of now. This would also require
to identify the opertion in different manner.

The poll_operation_id structure together with daemon_parms structure they
identify unambiguously the polling task.
2015-05-05 20:52:07 +02:00
Ondrej Kozina
bda26acf70 polldaemon: optimise out waiting after polling
Waiting even after _check_lv_status returned success and
'finished' flag was set to true doesn't make much sense.

Note that while we skip the wait() we also skip the
init_full_scan_done(0) inside the routine. This should
have no impact as long as the code after _wait_for_single_lv
doesn't presume anything about the state of the cache.
2015-05-05 20:51:45 +02:00
Ondrej Kozina
22ae43a11e polldaemon: get get_copy_vg ready for refactoring
with refactored code we take some VG locks as read-only.
Make the poll_get_copy_vg ready for the change.
2015-05-05 20:51:34 +02:00
Ondrej Kozina
991d646354 lvconvert: code cleanup and preps for refactoring
just a code cleanup and preparations for adding
new code required for polldaemon refactoring.
This commit should not have any functional impact.
2015-05-05 20:51:27 +02:00
Ondrej Kozina
32527861d0 polldaemon: respect lv_attr parm in poll_get_copy_lv
as a part of bigger effort to unify polling intefaces
poll_get_copy_lv should be able to look up LVs based
on theirs lv->status field.

Effective after pvmove starts using poll_get_copy_lv
fn as well.
2015-05-04 16:56:52 +02:00
Ondrej Kozina
26f4b1da88 polldaemon: move lvconvert_get_copy_lv code
Moving lvconvert_get_copy_lv to polldaemon (poll_get_copy_lv).
Clear move and rename.
2015-05-04 16:56:39 +02:00
Ondrej Kozina
079895b8be polldaemon: move lvconvert_get_copy_vg code
Moving lvconvert_get_copy_vg to polldaemon (poll_get_copy_vg).
Clear move and rename.
2015-05-04 16:56:28 +02:00
Zdenek Kabelac
7a5a4f952e tests: play better with mdadm
Manage mdadm devices on older distros is a challange.
2015-05-04 13:11:41 +02:00
Zdenek Kabelac
88421c883e raid: reread status when 0 is reported
When kernel target reports sync status as 0%  it might as well mean
it's 100% in sync, just the target is in some race inconsistent
state - so reread once again and take a more optimistic value ;)

Patch tries to work around:
https://bugzilla.redhat.com/show_bug.cgi?id=1210637
2015-05-04 13:09:05 +02:00
Zdenek Kabelac
2d10a6f6ae tests: check for open_count
Instead of checking /proc/mounts check for open_count of snap device.
Parallel umount has race, so check for open_count.
2015-05-04 10:18:44 +02:00
Zdenek Kabelac
7a588bce7b tests: drop extra scsi init
Use first test also for checking the support is there -
avoid one extra unnecessary scsi_debug reload.
2015-05-04 10:17:48 +02:00
Zdenek Kabelac
c90ee0414d tests: check for clvmd process entry
Instead of checking just for pid file - rather check
for process  - since there could be slight race, the
pid file is gone, but process still exists.
2015-05-04 10:16:33 +02:00
Zdenek Kabelac
3f05e662bb tests: validate passed LVM_TEST_DEVDIR
Quit test early if passed LVM_TEST_DEVDIR dir does not exists.
2015-05-04 10:15:56 +02:00
Zdenek Kabelac
b09ac72624 tests: wait for scsi device to appear
Continue with test as soon as device appear (avoid 2s delay)
2015-05-04 10:14:52 +02:00
Zdenek Kabelac
75aa3e951f tests: dd needs to fail in this case 2015-05-03 01:06:20 +02:00
Zdenek Kabelac
224e30a4b1 tests: more waits on restart
Check for socket presence (hardcoded for now)
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
31f1375d23 tests: use 800ms write delay
Since this value magically worked for  pvmove-abort*
use it here as well.

Also prepate_lvmetad has better kill&reload mechanism.
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
4f6660db7d tests: use odirect
Fill snaphot with odirect so we know data hits disk
before we test how full the snapshot is.
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
74a81a4577 lvm2app: call fin_locking in lvm_quit
lvm_quit() function should also close locking.
Fixes unclosed socket connecting clvmd.
2015-05-03 00:43:13 +02:00
Zdenek Kabelac
bc52f07a8f configure: detect /run dir
Access /run directly when system supports it.
2015-05-03 00:42:07 +02:00
Zdenek Kabelac
636bcb020a clvmd: missed newline in help text
Print \n after listing included lock managers.
2015-05-03 00:41:20 +02:00
Alasdair G Kergon
9fb93fcd90 post-release 2015-05-02 01:52:05 +01:00
Alasdair G Kergon
bee2df3903 pre-release 2015-05-02 01:41:17 +01:00
Alasdair G Kergon
796dc9c91c config: Remove newly-exposed default settings.
Reinstate config settings matching the last release until every
case where the generator produces different output has been reviewed
and fresh decisions made about which defaults to expose as protection
against changes in newer releases. We should be trying to reduce, not
increase, this number.
2015-05-02 00:07:12 +01:00
Zdenek Kabelac
3542fce0fb tests: more advance cleanup of running pvmove
More take down more targets and use time-limited code.
2015-05-01 22:49:38 +02:00
Zdenek Kabelac
abdfb1e75b tests: configure use_lvmetad when needed 2015-05-01 22:49:38 +02:00
David Teigland
6a171bbdf5 man: expanded explanation of lvmetad 2015-05-01 15:23:43 -05:00
David Teigland
9273b1a964 man: expanded explanation of pvscan
Related to it's role with lvmetad and auto-activation.
2015-05-01 15:23:32 -05:00
Zdenek Kabelac
9c7063ef89 tests: free -h is quite new option
Stay with -g and and ignore failure.
2015-05-01 15:40:04 +02:00
Zdenek Kabelac
79844b9066 tests: minor simplifications
minor updates
2015-05-01 15:07:59 +02:00
Zdenek Kabelac
fee09f0964 tests: disable usage of fuser
Seems we captured problems with debug.log overwrite,
so avoid quite expensive usage of fuser tool with each lvm command.
2015-05-01 15:07:59 +02:00
Zdenek Kabelac
4ce5b5fdf3 tests: run api tests from startup dir 2015-05-01 15:07:59 +02:00
Zdenek Kabelac
a3473e60db tests: no lvmetad reload for debugless output
Introduce LVM_TEST_LVMETAD_DEBUG_OPTS to allow to override
default debug opts for lvmetad.

However could be still overloaded on command line:

make check_lvmetad LVM_TEST_LVMETAD_DEBUG_OPTS="-l all"...
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
dd4e6b4e7e tests: lower version of dm-delay
Let's see what will break with lower version 1.1.

Also avoid repeated check of target version.
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
16e8006eb0 tests: rename kill_tagged_processes
Better name for aux function.
First use normal -TERM, and only after a while use -KILL
(leaving some time to correctly finish)
Print INFO about killed processes.
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
c18e969e30 tests: move conf preparing
If the test in the middle is restarting lvmetad
avoid conf regenerating.
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
0eea780bce tests: hide error message
Hide error about missing declare -A  support.
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
0480b4743a tests: wait between remount
Let's see if this help with some races...
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
4daede06e5 tests: move kernel_at_least to aux
Hide func processing and reuse existing
version_at_least().
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
f48a4c391c tests: watch out for RAM size
Reduce mem-requirements on low memory boxes,
activate less volumes if machine is below 0.5G.

Also print mem size at test header.
2015-05-01 15:07:58 +02:00
Peter Rajnoha
11e0dc40dc config: add CFG_DEFAULT_COMMENTED to comment out default value on output 2015-04-30 18:26:56 +02:00
Peter Rajnoha
8f25606d3a man: lvmconfig: also mention '--type list' in synopsis 2015-04-30 18:00:39 +02:00
Peter Rajnoha
fc65269d68 lvmconfig: add supporting code for handling deprecated settings
This patch adds supporting code for handling deprecated settings.

Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.

Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.

If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).

For example:

$ lvmconfig --type default activation
activation {
        ...
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated
activation {
        ...
	mirror_region_size=512
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withversions
activation {
        ...
	# Available since version 1.0.0.
	# Deprecated since version 2.2.99.
	mirror_region_size=512
	# Available since version 2.2.99.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
        ...
	# Configuration option activation/mirror_region_size.
	# This has been replaced by the activation/raid_region_size
	# setting.
	# Size (in KB) of each copy operation when mirroring.
	# This configuration option is deprecated.
	mirror_region_size=512

	# Configuration option activation/raid_region_size.
	# Size in KiB of each raid or mirror synchronization region.
	# For raid or mirror segment types, this is the amount of
	# data that is copied at once when initializing, or moved
	# at once by pvmove.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
       ...
       # Configuration option activation/mirror_region_size.
       # Size (in KB) of each copy operation when mirroring.
       mirror_region_size=512
       ...
}
2015-04-30 17:55:04 +02:00
Peter Rajnoha
5a0197121b config_settings: devices/cache, activation/mirror_region_size and activation/mirror_device_fault_policy are deprecated 2015-04-30 17:39:59 +02:00
Peter Rajnoha
b769183a98 config: preparation for marking configuration nodes as deprecated
A preparatory code for marking configuration nodes as deprecated:
  - struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
  - cfg* macros to handle new fields
  - related config_settings.h edits to add new fields for each item (null for all at the moment)

Patch with implementation will follow...
2015-04-30 15:39:34 +02:00
Peter Rajnoha
9c39d635b6 cleanup: config_settings.h: comments 2015-04-30 14:43:08 +02:00
Peter Rajnoha
25e7178e59 cleanup: config_settings.h: add some comments 2015-04-30 14:28:26 +02:00
Peter Rajnoha
d2c2718c11 lvmconfig: allow --withversions alone with --type list
Before this patch:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad

With this patch applied:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad - [2.2.93]
2015-04-30 14:18:14 +02:00
Peter Rajnoha
4388ab477c lvmconfig: comment out settings with proper space/tab prefix
We're commenting out settings with undefined default values.
The comment character '#' was printed at the very beginning of
the line, it should be placed just at the beginning of the setting,
after the space/tab prefix is printed.

Before this patch:

  $ lvmconfig --type default activation
  activation {
           ...
  #        volume_list=[]
           ...
  }

With this patch applied:

  $ lvmconfig --type default activation
  activation {
           ...
           # volume_list=[]
           ...
  }
2015-04-30 14:06:55 +02:00
Zdenek Kabelac
3706abde5e tests: lvmconf update
New lvmconf function is using bash associative arrays - however
older systems like RHEL5 doesn't provide this feature. In this case
stay with older variant.

Restore support for use case like this:
aux lvmconf 'tags/@foo {}'
2015-04-30 11:16:14 +02:00
Petr Rockai
13fea87960 spec: Pull in lvmconfig and associated manpages. 2015-04-30 06:35:05 +02:00
Petr Rockai
d6b6246864 man: Fix references to lvmcache(7) that mentioned section 8 by mistake. 2015-04-30 06:35:05 +02:00
David Teigland
299a3be0d3 man: lvmthin section about use-policies 2015-04-29 16:27:40 -05:00
David Teigland
bf73ccb848 man: 'lvmconfig' is preferred over 'lvm config' 2015-04-29 10:14:23 -05:00
Ondrej Kozina
08a82aa940 WHATS_NEW: commit e0a62b8fdc 2015-04-29 17:12:04 +02:00
Ondrej Kozina
e0a62b8fdc libdaemon: introduce support for exit on idle
works with systemd activated daemons only as of now

each daemon implementation may decide to signalize its
internal idle state (i.e. all background tasks unrelated to
client threads are finished)
2015-04-29 17:10:44 +02:00
Ondrej Kozina
b120454b50 toollib: code cleanup in lv_spawn_background_polling
we're going to extract parameters from lv_mirr later
with code refactoring of polldaemon
2015-04-29 17:10:37 +02:00
David Teigland
f0ff3e9982 man: 'lvm config' is preferred over 'lvm lvmconfig' 2015-04-29 10:04:28 -05:00
Peter Rajnoha
79ec8eb93c cleanup: lvmconfig man page typo 2015-04-29 16:35:49 +02:00
Peter Rajnoha
8b6b90b073 config: consolidate CFG_UNSUPPORTED and CFG_ADVANCED settings
These settings are in the "unsupported" group:

devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id

These settings are in the "advanced" group:

devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs

Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).

By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
2015-04-29 16:31:47 +02:00
Zdenek Kabelac
244ca7ee77 tests: minimize teardown when uneeded
If test has not yet initilized any device,
make teardown a bit faster.
2015-04-29 15:09:58 +02:00
Zdenek Kabelac
c5b4327f3d tests: bash-fu for lvmconf
Sqeeze about 0.1s out of every created conf and use internal
bash associative arrays instead of lot of command forking
2015-04-29 15:09:58 +02:00
Zdenek Kabelac
923902013c lvmetad: drop unused vars
Squash some unused vars introduced in some previous commit.s
2015-04-29 15:09:58 +02:00
bkabrda@redhat.com
5d8b31ffad python: python 3 compat patch for lvm2
As provided by rhbz: 1136366
2015-04-29 15:09:56 +02:00
Petr Rockai
4946c64092 lvmetad: Avoid duplicate entries in the list of alternate devices. 2015-04-29 13:23:23 +02:00
Peter Rajnoha
3be3eb2995 lvmconfig: add --type list and -l|--list
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).

For example (displaying only "config" section so the list is not long):

$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir

$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]

Example with --atversion (displaying global section):

$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file

$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
2015-04-29 11:58:14 +02:00
Peter Rajnoha
0ba332e82a refactor: dumpconfig: keep --withcomments to display full comment and use --withsummary for one line summary 2015-04-29 11:14:18 +02:00
Ondrej Kozina
15a563c376 polldaemon: remove redundant log messages
also alter comments describing the change in _poll_vg
wrt correct handling of multiple LVs
2015-04-28 23:19:20 +02:00
Ondrej Kozina
ea5c1b0a73 pvmove: make log messages more comprehensible
clarify messages printed during pvmove set up (in
_update_metadata fn) and subsequent metadata updates
during a segment progression
2015-04-28 22:45:54 +02:00
Ondrej Kozina
a1474b98f9 update copyright info in various files
basically transfer former date ranges from files where
the code originated from (pvmove.c and lvconvert.c)
2015-04-28 22:45:19 +02:00
Ondrej Kozina
90cbc5576f tests: try harder to kill all dangling procs
also simplify and make less prone to an error checks
for running bg processes inside a pvmove-resume tests
2015-04-28 22:31:50 +02:00
Ondrej Kozina
8c9ab2a4dd tests: simplify removal of dangling bg procs
some tests left dangling bg processes originating in
lvm2 commands being able to spawn any bg polling process
(lvchange, vgchange, pvmove, lvconvert...)

Initial fn 'add_to_kill_list' should collect processes with
specific parameters (proc's command line and parent processes ID).
After testing finishes the fn kill_listed_processes should remove these
listed by 'add_to_kill_list'.

Unfortunately it proved to be prone to an error especially in scenarios
where cmd line of initiating command contained characters required to
be espaced before passing to shell script to make it work correctly.
(Or if cmd spawned more than one bg process with same cmd line. i.e.:
vgchange or lvchange).

The new implementation is much simpler. It uses env. variable (LVM_TEST_TAG)
for marking a process desired to be killed later or during test env. teardown.
(i.e.: LVM_TEST_TAG=kill_me_$PREFIX to kill only processes related to
current test environment)
2015-04-28 22:31:40 +02:00
Alasdair G Kergon
3f0434057b config: Introduce lvmconfig.
'lvm dumpconfig' now does a lot more than just dumping configuration
information and is no longer only a support tool.  Users now need
to run it to find out about configuration information that has been
removed from the lvm.conf man page so we need to promote this to full
command line status as 'lvmconfig'.  Also accept 'lvm config' and mention
it in the usage information of lvmconf (which should also get merged in
eventually).
2015-04-28 17:00:37 +01:00
David Teigland
beb229e1e8 devices: improve handling of duplicate PVs
Example:

/dev/loop0 and /dev/loop1 are duplicates,
created by copying one backing file to the
other.

'identity /dev/loopX' creates an identity
mapping for loopX named idmloopX, which
adds a duplicate for the named device.

The duplicate selection code for lvmetad is
incomplete, and lvmetad is disabled for this
example.

[~]# losetup -f loopfile0
[~]# pvs
  PV         VG           Fmt  Attr PSize   PFree
  /dev/loop0 foo          lvm2 a--  308.00m 296.00m

[~]# losetup -f loopfile1
[~]# pvs
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
  Using duplicate PV /dev/loop1 which is more recent, replacing /dev/loop0
  PV         VG           Fmt  Attr PSize   PFree
  /dev/loop1 foo          lvm2 a--  308.00m 308.00m

[~]# ./identity /dev/loop0
[~]# pvs
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
  Using duplicate PV /dev/loop1 without holders, replacing /dev/loop0
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop0 not /dev/loop1
  Using duplicate PV /dev/mapper/idmloop0 from subsystem DM, replacing /dev/loop1
  PV                   VG           Fmt  Attr PSize   PFree
  /dev/mapper/idmloop0 foo          lvm2 a--  308.00m 296.00m

[~]# ./identity /dev/loop1
[~]# pvs
  WARNING: duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV is being used from both devices /dev/loop0 and /dev/loop1
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
  Using duplicate PV /dev/loop1 which is more recent, replacing /dev/loop0
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop0 not /dev/loop1
  Using duplicate PV /dev/mapper/idmloop0 from subsystem DM, replacing /dev/loop1
  Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop1 not /dev/mapper/idmloop0
  Using duplicate PV /dev/mapper/idmloop1 which is more recent, replacing /dev/mapper/idmloop0
  PV                   VG           Fmt  Attr PSize   PFree
  /dev/mapper/idmloop1 foo          lvm2 a--  308.00m 308.00m
2015-04-28 10:41:32 -05:00
David Teigland
6cc37275ce config: improve the description of options lists
Describe
thin_check_options, thin_repair_options,
cache_check_option, scache_repair_options

as a "list of options", rather than a "string of options"
because a single string, e.g. "-q --clear-needs-check-flag"
does not work, and needs to be entered as a list,
e.g. ["-q", "--clear-needs-check-flag"]
2015-04-28 10:06:23 -05:00
Peter Rajnoha
ae0014e2df config: also evaluate default unconfigured values in runtime for 'cfg_runtime' settings
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.

For example, before this patch:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache

With this patch applied:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
2015-04-28 15:36:35 +02:00
Peter Rajnoha
afcf472464 config: make it possible to set default unconfigured_value for settings of all types, not just strings
The @something@ used for unconfigured default value is not bound to
CFG_TYPE_STRING settings defined in config_settings.h, it can be
used for any other config type too.
2015-04-28 15:32:38 +02:00
Peter Rajnoha
de6deec3b8 refactor: rename struct cfg_def_item's 'unconfigured_path' to 'unconfigured_value'
It's not only path that can be used for setting's default value
in unconfigured form as @something@.
2015-04-28 15:30:48 +02:00
Alasdair G Kergon
d0c46c9ed5 conf: Avoid temp files when generating config. 2015-04-28 13:02:19 +01:00
Zdenek Kabelac
71dbfd7c20 tests: more help# 2015-04-28 11:35:56 +02:00
Zdenek Kabelac
3fbb7b6e35 tests: always zero disk header
It appear that older wipefs doesn't wipe partition table.
So ensure there is no partition on LVM_TEST_BACKING_DEVICE.
2015-04-28 11:32:52 +02:00
Zdenek Kabelac
1bb5b498f0 tests: more descriptive aux
Tell what's reason of aux fail here.
2015-04-28 11:23:16 +02:00
Zdenek Kabelac
a378e5a6dd tests: drop debug test
Remove 'debug leftover' from test.
2015-04-28 11:23:16 +02:00
David Teigland
0c1bda9b53 example.conf.in: regenerate
From recent config_settings.h changes.
2015-04-27 14:15:24 -05:00
David Teigland
cfb0174fed config: fix a couple mistakes with defaults
for archive, archive_dir, and cache
2015-04-27 13:54:45 -05:00
Zdenek Kabelac
a7d28639eb tests: use new help in aux
Simplify tests and use aux mdadm helpers.
2015-04-25 00:40:02 +02:00
Zdenek Kabelac
1e3c135d71 tests: aux for mdadm
Implement aux helper fce for mdadm.
2015-04-25 00:40:02 +02:00
Zdenek Kabelac
f50229041b tests: allow add printable skip message 2015-04-25 00:40:02 +02:00
Zdenek Kabelac
a939857a63 tests: check sysfs more generically
Allow to access more files in device sysfs subtree.
2015-04-25 00:40:02 +02:00
Ondrej Kozina
d9176782fe tests: add double quotes around add_to_kill_list parms 2015-04-25 00:40:02 +02:00
Zdenek Kabelac
d7888e8316 tests: try more advanced clean
When test is executed on real device - lets try a more complete
cleanup - discard whole device first and try to wipe any
headers it might be left from previous test.
2015-04-25 00:39:43 +02:00
Peter Rajnoha
066d0a4e19 cleanup: ancestors -> lv_ancestors, descendants -> lv_descendants
Use "lv_" prefix as they're LV fields.
2015-04-24 14:19:28 +02:00
Peter Rajnoha
6e4aee0492 report: add lv_ancestors and lv_descendants reporting fields
Show full chain of ancestors and descendants for snapshots
(both thick and thin - in case of thick, the "ancestor" field
is actually equal to "origin" field as snapshots can't be
chained for thick snapshots).

These fields display current state as it is, they do not
display any history! If the snapshot chain is broken in
the middle, we don't report the historical origin (this
is going to be a part of another patch and a different
set of fields or just a switch for existing fields to
show ancestors and descendants with history included).

For example:

(origin --> snapshot)

lvol1 --> lvol2 --> lvol3 --> lvol4
              \
                --> lvol5 --> lvol6 --> lvol7 --> lvol8

$ lvs -o name,pool_lv,origin,ancestors,descendants vg
  LV    Pool Origin Ancestors                     Descendants
  lvol1 pool                                      lvol2,lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
  lvol2 pool lvol1  lvol1                         lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
  lvol3 pool lvol2  lvol2,lvol1                   lvol4
  lvol4 pool lvol3  lvol3,lvol2,lvol1
  lvol5 pool lvol2  lvol2,lvol1                   lvol6,lvol7,lvol8
  lvol6 pool lvol5  lvol5,lvol2,lvol1             lvol7,lvol8
  lvol7 pool lvol6  lvol6,lvol5,lvol2,lvol1       lvol8
  lvol8 pool lvol7  lvol7,lvol6,lvol5,lvol2,lvol1
2015-04-24 11:51:52 +02:00
Peter Rajnoha
82f6dbfaf7 select: fix matching reserved values while <,<=,>,>= is used in selection criteria
Scenario:

$ vgs -o+vg_mda_copies
  VG     #PV #LV #SN Attr   VSize VFree #VMdaCps
  fedora   1   2   0 wz--n- 9.51g    0  unmanaged
  vg      16   9   0 wz--n- 1.94g 1.83g         2

$ lvs -o+read_ahead vg/lvol6 vg/lvol7
  LV    VG   Attr       LSize Pool Origin Data%  Rahead
  lvol6 vg   Vwi-a-tz-- 1.00g pool lvol5  0.00      auto
  lvol7 vg   Vwi---tz-k 1.00g pool lvol6         256.00k

Before this patch:

$vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
  VG   #VMdaCps
  vg          2

Problem:
Reserved values can be only used with exact match = or !=, not <,<=,>,>=.
In the example above, the "unamanaged" is internally represented as
18446744073709551615, but this should be ignored while not comparing
field directly with "unmanaged" reserved name with = or !=. Users
should not be aware of this internal mapping of the reserved value
name to its internal value and hence it doesn't make sense for such
reserved value to take place in results of <,<=,> and >=.
There's no order defined for reserved values!!! It's a special
*reserved* value that is taken out of the usual value range
of that type.

This is very similar to what we have already fixed with
2f7f6932dc, but it's the other way round
now - we're using reserved value name in selection criteria now
(in the patch 2f7f693, we had concrete value and we compared it
with the reserved value). So this patch completes patch 2f7f693.

This patch also fixes this problem:

$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
  LV    VG   Attr       LSize Pool Origin Data%  Rahead
  lvol6 vg   Vwi-a-tz-- 1.00g pool lvol5  0.00      auto
  lvol7 vg   Vwi---tz-k 1.00g pool lvol6         256.00k

Problem:
In the example above, the internal reserved value "auto" is in the
range of selection "> 32k" - it shouldn't match as well. Here the
"auto" is internally represented as MAX_DBL and of course, numerically,
MAX_DBL > 256k. But for users, the reserved value should be uncomparable
to any number so the mapping of the reserved value name to its interna
 value is transparent to users. Again, there's no order defined for
reserved values and hence it should never match if using <,<=,>,>=
operators.

This is actually exactly the same problem as already described in
2f7f6932dc, but that patch failed for
size field types because of incorrect internal representation used.

With this patch applied, both problematic scenarios mentioned
above are fixed now:

$ vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
(blank)

$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
  LV    VG   Attr       LSize Pool Origin Rahead
  lvol7 vg   Vwi---tz-k 1.00g pool lvol6  256.00k
2015-04-24 09:48:57 +02:00
Zdenek Kabelac
de0ce46361 tests: fix md raid test on real /dev
Zero raid signatures when raid is stopped - so signatures
are not requiring wipe when pvcreate follows.

Handle real /dev
2015-04-23 20:28:44 +02:00
Alasdair G Kergon
8853462528 libdm: Add uuid/devno to ioctl failure log message. 2015-04-23 19:26:52 +01:00
Alasdair G Kergon
1906619187 libdm: Add DM_INTERNAL_SUSPEND_FLAG.
Still needs to be reported by dmsetup.
2015-04-23 18:39:04 +01:00
David Teigland
95da21cc18 config: fix check_options array
The code used it as both a single string, and as
an array of strings in different places.  Fix it
so that it's an array of strings everywhere.
2015-04-23 10:35:34 -05:00
David Teigland
a8bdfbe959 config: thin_disabled_features default should be undefined
An array that's empty by default should be flagged as
undefined.
2015-04-23 10:19:00 -05:00
David Teigland
3fc9615d15 Improve duplicate PV handling
Make the processing of duplicate PVs the
same with and without lvmetad.
2015-04-22 13:22:14 -05:00
Petr Rockai
92607ecfe6 man: Escape single quotes in an example to avoid groff's unicode conversion. 2015-04-22 17:31:11 +02:00
David Teigland
33429ea083 make: autoconfisms for generate 2015-04-22 10:05:02 -05:00
David Teigland
808f88f9f0 make: let generate use the just built libdm 2015-04-22 09:37:56 -05:00
Alasdair G Kergon
81d03b46b0 doc: Update dm kernel files.
v4.0-9804-gdb4fd9c
2015-04-22 15:34:25 +01:00
Zdenek Kabelac
2fea720881 tests: add missing "" around dev 2015-04-22 11:18:31 +02:00
Zdenek Kabelac
4b161de2e5 tests: aux works better with installed_testsuite
When test suite is used from installed rpm package
we need to handle things better.

This patch is rather first approach - expecting few more
tweaks needed.
2015-04-22 11:18:31 +02:00
Zdenek Kabelac
7a64a157e1 tests: simplify teardown
If TESTNAME has not been created yet, avoid running complex teardown.
2015-04-22 11:18:31 +02:00
Zdenek Kabelac
7f8d942268 makefiles: avoid // in datadir usage
DESTDIR already comes with '/'
2015-04-22 10:59:03 +02:00
Zdenek Kabelac
d8874556cd tests: install also api test
Install .t & .py binaries.
On 'make clean'  ensure also -t files are removed.
2015-04-22 10:57:42 +02:00
Zdenek Kabelac
3216a9a819 tests: drop DEBUG log after success
At this moment LVM_LOG_FILE_EPOCH with
LVM_EXPECTED_EXIT_STATUS  properly deletes debug logs
only for real commands - support for lvm2 API does not yet
exists
2015-04-22 10:55:37 +02:00
Zdenek Kabelac
14c3f9603e tests: use 800ms delay
Worked better with pvmove-abort-all so use here as well.
2015-04-22 09:09:26 +02:00
Zdenek Kabelac
3f8da60079 tests: notify drops log always
Even on success remove debug.log here.
2015-04-22 09:09:26 +02:00
Zdenek Kabelac
afdff40542 tests: explicitely ignore result code 2015-04-22 09:09:26 +02:00
Zdenek Kabelac
30e8b284a7 tests: allow to use sysfs filter
Current filtering logic in lvm2 needs some rework.
For now at least enable it in test suite.
2015-04-22 09:09:26 +02:00
Zdenek Kabelac
16ee4642c7 nix: install also mdadm
Some tests are checking functinality of lvm2 with mdadm.
2015-04-22 09:09:26 +02:00
David Teigland
2e035162a1 config: thin_repair_options and cache_repair_options are undefined
By default these are empty strings, so the config settings
should be flagged as undefined, so they will be commented
out of the generated config.  Otherwise, the lines:

thin_repair_options=""
cache_repair_options=""

in the dump output cause a warning when processed since
lvm doesn't want an empty string.

Also regenerate lvm.conf.in.
2015-04-21 16:03:54 -05:00
David Teigland
3b15f79bf0 generate example.conf.in, lvmlocal.conf.in
These were created by 'make generate'.
2015-04-21 15:04:22 -05:00
David Teigland
47ed4cdc35 config: remove duplication of settings
The specific config settings have been removed
from the lvm.conf(5) man page, and replaced with
a description of how to use lvm dumpconfig to
view the settings.

The sample lvm.conf and lvmlocal.conf files are now generated:

example.conf.base  - initial ungenerated part of the file
example.conf.gen   - generated portion from dumpconfig
example.conf.in    - combination of .base and .gen files
example.conf       - result of configure processing .in file

lvmlocal.conf.base - initial ungenerated part of the file
lvmlocal.conf.gen  - generated portion from dumpconfig
lvmlocal.conf.in   - combination of .base and .gen files
lvmlocal.conf      - result of configure processing .in file

Do not edit the .in files, but edit config_settings.h
or the .base files, and then use 'make generate' to create
the new .in files.

- configure
  with options

- make
  creates tools/lvm

- make generate
  uses tools/lvm to create example.conf.in and lvmlocal.conf.in
  by combining .base files with dumpconfig output.

- configure
  with same options as above
  creates example.conf and lvmlocal.conf from .in files
2015-04-21 14:55:03 -05:00
David Teigland
9b86e8e8f4 dumpconfig: add --ignorelocal
When generating a sample lvm.conf file, we don't want to
include the "local" section, which is kept in lvmlocal.conf.
2015-04-21 14:55:03 -05:00
David Teigland
0d0d50182d toollib: fix duplicate handling in process_each_pv
With use_lvmetad=0, duplicate PVs /dev/loop0 and /dev/loop1,
where in this example, /dev/loop1 is the cached device
referenced by pv->dev, the command 'pvs /dev/loop0' reports:

Failed to find physical volume "/dev/loop0".

This is because the duplicate PV detection by pvid is
not working because _get_all_devices() is not setting
any dev->pvid for any entries.  This is because the
pvid information has not yet been saved in lvmcache.
This is fixed by calling _get_vgnameids_on_system()
before _get_all_devices(), which has the effect of
caching the necessary pvid information.

With this fix, running pvs /dev/loop0, or pvs /dev/loop1,
produces no error and one line of output for the PV (the
device printed is the one cached in pv->dev, in this
example /dev/loop1.)

Running 'pvs /dev/loop0 /dev/loop1' produces no error
and two lines of output, with each device displayed
on one of the lines.

Running 'pvs -a' shows two PVs, one with loop0 and one
with loop1, and both shown as a member of the same VG.

Running 'pvs' shows only one of the duplicate PVs,
and that shows the device cached in pv->dev (loop1).

The above output is what the duplicate handling code
was previously designed to output in commits:

b64da4d8b5 toollib: search for duplicate PVs only when needed
3a7c47af0e toollib: pvs -a should display VG name for each duplicate PV
57d74a45a0 toollib: override the PV device with duplicates
c1f246fedf toollib: handle duplicate pvs in process_in_pv

As a further step after this, we may choose to change
some of those.

For all of these commands, a warning is printed about
the existence of the duplicate PVs:

Found duplicate PV ...: using /dev/loop1 not /dev/loop0
2015-04-20 17:07:58 -05:00
Zdenek Kabelac
caa9223c85 tests: update to renamed envvars
Enhance 'not' so 'should' now shows log trace from
command which has failed but should not.
2015-04-20 19:18:56 +02:00
Zdenek Kabelac
85e833c172 tests: add extra keyword for timing control
Control logging of timer with
"## timing off"  and "## timing on"
2015-04-20 19:18:56 +02:00
Zdenek Kabelac
2b4f10ac66 debug: change envvar
Rename envvar LVM_LOG_FILE_UNLINK_STATUS to LVM_EXPECTED_EXIT_STATUS
and change compare sign from  '!' to  '>'.

Validate LVM_LOG_FILE_EPOCH and support strictly only
up-to 32 alpha chars. If the content doesn't pass
epoch is simply ignored.
2015-04-20 19:18:56 +02:00
Zdenek Kabelac
cf4df9e349 tests: use new debug logging feature
Enhance 'not' to manage autodeletion of log files in right cases.
Use separately marked epoch log files for clvmd and dmeventd.
Properly manage stack tracing for new debug.log names.
2015-04-20 12:12:22 +02:00
Zdenek Kabelac
bff3a1651d debug: use epoch for dmeventd logging
When LVM_LOG_FILE_EPOCH is set, route lvm command debug message
to lvm.conf log file instead of syslog.
2015-04-20 12:12:22 +02:00
Zdenek Kabelac
5723a7cd7e debug: add new envvar
Add support for 2 new envvars for internal lvm2 test suite
(though it could be possible usable for other cases)

LVM_LOG_FILE_EPOCH

Whether to add 'epoch' extension that consist from
the envvar 'string' + pid + starttime in kernel units
obtained from /proc/self/stat.

LVM_LOG_FILE_UNLINK_STATUS

Whether to unlink the log depending on return status value,
so if the command is successful the log is automatically
deleted.

API is still for now experimental to catch various issue.
2015-04-20 12:12:22 +02:00
Ondrej Kozina
de4791c052 WHATS_NEW: update for various commits
add info for various commits, most significant were:

- toollib: close connection to lvmetad after fork
  (fe30658a4d)

- toollib: do not spawn polling in lv_change_activate
  (c26d81d6e6)

- pvmove: split pvmove_update_metadata function
  (65623b63a2)

- lvconvert: move poll code in before refactoring
  (5190f56605)

- pvmove: move poll code in before refactoring
  (a098aa419f)
2015-04-20 10:38:54 +02:00
David Teigland
5cd6381717 dumpconfig: add --unconfigured option
Using this option, default string values that are
configurable are printed as unconfigured values,
e.g. "@CONFDIR@" instead of "/etc".
2015-04-17 11:35:34 -05:00
Ondrej Kozina
061e371319 pvmove: fix wrong error path in _update_metadata
fix regression introduced in 65623b63a2

should return zero no matter the result of resume_lvs fn in error
path
2015-04-16 17:54:00 +02:00
David Teigland
105c07d1b4 config: edit descriptions
Take some new information and wording from lvm.conf.5.
2015-04-15 14:21:20 -05:00
David Teigland
5f6ac1c812 dumpconfig: add --withfullcomments option
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
2015-04-15 10:56:42 -05:00
Petr Rockai
9ce52430de NIX: Also install device-mapper-persistent-data on CentOS 7 & FC 19+. 2015-04-15 16:44:15 +02:00
Zdenek Kabelac
191f3cf52a tests: shell-fu
Preserve quotes for devs and use  shell arrays to pass things around.
2015-04-15 15:09:45 +02:00
Zdenek Kabelac
43a6f9e726 tests: move print of replaced vars 2015-04-15 15:09:45 +02:00
Zdenek Kabelac
53c2c45625 tests: align test result in batch mode 2015-04-15 13:35:42 +02:00
Zdenek Kabelac
e478471dd5 tests: move stamp handling
Shift stamp handling into TimedBuffer,
so it's same everywhere.
2015-04-15 13:35:42 +02:00
Zdenek Kabelac
5d4695569d tests: hide error output
Hide error message if pid is already away.
2015-04-15 13:35:42 +02:00
Zdenek Kabelac
930f0aae84 tests: fix aux have test
Previous commit has made have_cache & have_thin producing
false return value.

Fix it and at the some time provide much better reconfiguring
warning message.

If the test machine is missing needed and configured binaries
it will produce TEST WARNING result.
2015-04-15 13:35:42 +02:00
Zdenek Kabelac
1a7dd13e70 tests: no tables for no devices
If dm table does't contain any PREFIX device, don't bother
to call other commands

No tracing if test is skipped.
2015-04-15 13:35:42 +02:00
Zdenek Kabelac
f5466fe435 tests: preserve "" around dev 2015-04-15 13:35:42 +02:00
Zdenek Kabelac
1a814af46b makefiles: fix usage of default value
When a var like LVM_TEST_THIN_CHECK_CMD is set to ""
(which is valid) we need to correctly use '-'.
Otherwise ':-' replaces such value with built-in default.
2015-04-15 13:35:42 +02:00
Peter Rajnoha
22defdac64 man: fix some formatting and also mention -vv 2015-04-15 09:19:11 +02:00
David Teigland
6cdab82cf3 config: edit descriptions
Rewording so the first line of the description
works as a single line summary of the option.
2015-04-14 17:00:28 -05:00
Petr Rockai
7e58ae7dac test: Show all lvmetad messages (errors, warnings), not just debug+wire. 2015-04-14 20:18:27 +02:00
Petr Rockai
026c38ac1e NIX: Disable profiling in all but one configuration. 2015-04-14 20:18:27 +02:00
Petr Rockai
24352aff2b lvmetad: Issue warnings about duplicate PV UUIDs (client-side). 2015-04-14 20:18:27 +02:00
Petr Rockai
a1dd61459c lvmetad: Track alternate devices for PVs.
There are two reasons for this: first, this allows the client side to notice
that some PV has multiple devices associated with it and print appropriate
warnings. Second, if a duplicate device pops up and disappears, after this
change the original connection between the PV and device is not lost.
2015-04-14 20:18:27 +02:00
Petr Rockai
2ebb4f4ca3 libdaemon: Export chain_node from config-utils.c. 2015-04-14 20:16:53 +02:00
Peter Rajnoha
e3c831030d WHATS_NEW: commit 375ed98 2015-04-14 15:28:42 +02:00
Peter Rajnoha
375ed98ae9 make: move blkdeactivate script and blkdeactivate.8 man page installation from install_lvm2 to install_device-mapper target
This completes commit 7a4e27eee5.
2015-04-14 15:24:37 +02:00
Peter Rajnoha
7a4e27eee5 blkdeactivate: check for lvm binary and skip LVM processing if not present
This removes dependency on lvm binary - if it's not present, all LVM
processing is skipped (shouldn't normally happen because if lvm binary
is missing then there's obviously nothing that would activate it, but
let's make sure).

Without this tight dependency on lvm, the blkdeactivate script can
be packaged with libdevmapper/dmsetup (in contrast to lvm as it was
before) and as such the script can still be used to handle other DM
devices.
2015-04-14 13:35:11 +02:00
Zdenek Kabelac
d1a770107d tests: update pvmove tests
Put in pvmove background process into list quickly.
Update API for aux add_to_kill_list()/kill_listed_processes().
Run on 'background' (&) only non-background pvmoves.
2015-04-14 13:29:43 +02:00
Zdenek Kabelac
75454c2b32 tests: rusage skipped only for skipped 2015-04-14 13:29:43 +02:00
Zdenek Kabelac
4cdf155a87 makefiles: check lcov file has content
genhtml may get confused without content.
2015-04-14 13:29:43 +02:00
Zdenek Kabelac
a084b3122f tests: integrate default thin/cache tool paths
If the system is correctly configure (cache & thin tools are present)
avoid 'extra' rebuild of configuration.

On the other hand - if some tool is missing - duplicate ##LVMCONF should
make it more straighforward to see.
2015-04-14 10:11:36 +02:00
Zdenek Kabelac
c6bcfcba85 tests: stacktrace understands fullpath
$0 as name of script could be either relative or full path.
When it's fullpath don't prepend $TESTOLDPWD.
2015-04-14 10:11:36 +02:00
Zdenek Kabelac
c969e05aab tests: avoid dup of lvm.conf
When running lvmetad test - avoid duplicate create of lvm.conf
Also as lvmetad cannot be used with cluster make it as 2 code paths.
2015-04-14 10:11:35 +02:00
Zdenek Kabelac
ee6fc17663 makefiles: skip lvmetad tests
When build without lvmetad, skip  n/udev-lvmetad flavour execution.
Update help test.
2015-04-14 10:11:35 +02:00
Peter Rajnoha
d5651f44e3 man: lvmconf: more notes on --services option 2015-04-14 09:49:56 +02:00
Ondrej Kozina
96124c6c0b tests: [new] check pvmove resume works as expected
various methods of resuming interrupted pvmove are tested:
- pvmove
- pvmove -b
- lvchange
- vgchange

tests for commits:
- c26d81d6e6
- fe30658a4d
2015-04-13 20:53:18 +02:00
Ondrej Kozina
fe30658a4d toollib: close connection to lvmetad after fork
sharing connection between parent command and background
processes spawned from parent could lead to occasional failures
due to unexpected corruption in daemon responses sent to either child
or a parent.

lvmetad issued warning about duplicate config values in request.
LVM commands occasionaly failed w/ internal error after receving
corrupted response.

lvmetad connection is renewed when needed after explicit disconnect
in child
2015-04-13 20:52:32 +02:00
Ondrej Kozina
c26d81d6e6 toollib: do not spawn polling in lv_change_activate
spawning a background polling from within the lv_change_activate
fn went to two problems:

1) vgchange should not spawn any background polling until after
   the whole activation process for a VG is finished. Otherwise
   it could lead to a duplicite request for spawning background
   polling. This statement was alredy true with one exception of
   mirror up-conversion polling (fixed by this commit).

2) due to current conditions in lv_change_activate lvchange cmd
   couldn't start background polling for pvmove LVs if such LV was
   about to get activated by the command in the same time.

This commit however doesn't alter the lvchange cmd so that it works same as
vgchange with regard to not to spawn duplicate background pollings per
unique LV.
2015-04-13 20:52:22 +02:00
Ondrej Kozina
59c417379e vgchange: remove redundant check
pvmove LVs are invisible thus already skipped due to check
lv_is_visible() at the beginning of the cycle.
2015-04-13 20:52:12 +02:00
David Teigland
fa16c9b7cb config: fix description syntax errors
from previous commit
2015-04-13 13:48:01 -05:00
David Teigland
29220a181a config: update descriptions
- filter, preferred_names
2015-04-13 13:40:11 -05:00
Zdenek Kabelac
e4261ba037 tests: update runner
Reenable TESTDIR  & PREFIX replacement.
Since we need to replace string in proper order (1st. @TESTDIR@,
2nd. @PREFIX@), drop map and use plain string.

Drop timestamp logging when 'stacktracing'
2015-04-13 16:38:32 +02:00
Zdenek Kabelac
0aef2b719f tests: log parallel debug.log usage as problem 2015-04-13 16:38:32 +02:00
Zdenek Kabelac
0457224feb tests: sections in test separated
Use  <========  to separate sections.
Use ##  to prefix these outputs.
Drop $top_srcdir from sed  (it's been replacing '..')
Hide more /dev  dirs.
2015-04-13 16:38:31 +02:00
Zdenek Kabelac
f080ebc123 tests: hide unwanted output 2015-04-13 16:38:31 +02:00
Zdenek Kabelac
391500643c tests: slowdown mirroring more
Since some of test machines are very slow, slowdown mirroring
even more.
2015-04-13 16:38:31 +02:00
Zdenek Kabelac
29467abe59 cleanup: put easier tests first
If we could 'break' before calling strcmp() do it.
Use fputc for single char output (\n).
2015-04-13 16:38:31 +02:00
Zdenek Kabelac
0b99d648ef cleanup: typo in comment 2015-04-13 16:38:30 +02:00
Peter Rajnoha
695237f2ae WHATS_NEW: previous commit f814d7wq 2015-04-13 15:49:25 +02:00
Peter Rajnoha
f814d763c6 lvmconf: add --enable-halvm, --disable-halvm, --services, --mirrorservice, --startstopservices options and use proper global/use_lvmetad default value
This patch adds new options to lvmconf:

  --enable-halvm (just like --enable-cluster, but configure LVM
                  for use in HA LVM - meaning disabling lvmetad and
                  making sure we have locking_type=1)

  --disable-halvm (just like --disable-cluster, but configure LVM
                   back from HA LVM - meaning enabling lvmetad if
                   it's enabled by default and making sure we have
                   default locking type set)

  --services (causes clvmd and lvmetad services to be enabled or
              disabled appropriately and conforming to the changes
              in lvm configuration we've just made with lvmconf)

  --mirrorservice (in addition to clvmd and lvmetad services, also
                   enable or disable cmirrord service appropriately;
                   this is a separate option because cmirrord is
                   optional and it doesn't need to be always enabled
                   when clvmd is enabled)

  --startstopservices (in addition to enabling or disabling services,
                       start and stop these services immediately)

These options are supposed to help users to make their system ready
for cluster with clvmd (active-active) or HA LVM (active-passive) use
while lvmconf script can handle services as well so users don't need
to bother about setting them manually.

Also, before this patch, we hardcoded global/use_lvmetad=0 as default
value in lvmconf script. Howeverm this default may change by just
flipping the value in config_settings.h and we may forget to edit
the lvmconf. It's better to use lvm dumpconfig --type default global/use_lvmetad
to get the actual default value and use this one instead of hardcoded one.
2015-04-13 15:27:17 +02:00
Alasdair G Kergon
cc26085b62 alloc: Respect cling_tag_list in contig alloc.
When performing initial allocation (so there is nothing yet to
cling to), use the list of tags in allocation/cling_tag_list to
partition the PVs.  We implement this by maintaining a list of
tags that have been "used up" as we proceed and ignoring further
devices that have a tag on the list.

https://bugzilla.redhat.com/983600
2015-04-11 01:55:24 +01:00
David Teigland
b851b74cba config: editing descriptions
Update wording and formatting.
2015-04-10 16:43:38 -05:00
Alasdair G Kergon
2872e8c289 alloc: Add A_PARTITION_BY_TAGS to avoid sharing.
Add A_PARTITION_BY_TAGS set when allocated areas should not share tags
with each other and allow _match_pv_tags to accept an alternative list
of tags.  (Not used yet.)
2015-04-10 21:57:52 +01:00
Tony Asleson
0523c71844 python: Fix ws liblvm.c
Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-04-10 11:01:46 -05:00
Tony Asleson
f29df9acfe python: Unit test ws fixes
pep8 corrections for:
    - mixed leading ws (tabs & spaces)
    - spacing around arithmetic operators

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-04-10 10:52:12 -05:00
Tony Asleson
2b557b595a python: Make lv addTag/removeTag persistent
Added lvm_vg_write in the addTag/removeTag paths to make the
changes persist.  Added unit test to ensure functionality.

https://bugzilla.redhat.com/show_bug.cgi?id=1210020

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2015-04-10 10:38:43 -05:00
Peter Rajnoha
394250ef67 report: lv_metadata_size, data_lv and metadata_lv also reports properties for cache pools 2015-04-10 14:55:28 +02:00
Peter Rajnoha
463fd954bb config: add note about 'vsn' macro use in config_settings.h 2015-04-10 09:51:08 +02:00
David Teigland
4eaa399b54 config: comments update
missing \n
2015-04-09 16:35:20 -05:00
David Teigland
303c5ba803 config: update description
Remove examples that simply replicate the default shown.
2015-04-09 16:09:53 -05:00
David Teigland
6f3f421228 config: include full comments
Comments from the sample config files are copied into
the comment field of the config settings structure.
This includes only minimal changes to the text.

With this in place, the sample config files can
be generated from 'lvm dumpconfig', and content
for an lvm.conf man page can also be generated.
2015-04-09 15:35:28 -05:00
Alasdair G Kergon
a9d48bae2f cache: Set correct vgid when changing PV header.
pv_write is called both to write orphans and to rewrite PV headers
of PVs in VGs.  It needs to select the correct VG id so that the
internal cache state gets updated correctly.

It only affected commands that involved further steps after
the pv_write and was often masked because the metadata would
be re-read off disk and correct itself.

"Incorrect metadata area header checksum" warnings appeared.

Example:
  Create vg1 containing dev1, dev2 and dev3.
  Hide dev1 and dev2 from the system.
  Fix up vg1 with vgreduce --removemissing.
  Bring back dev1 and dev2.
  In a single operation reinstate dev1 and dev2 into vg1 (vgextend).
Done as separate operations (automatically fix-up dev1 and dev2 as orphans,
then vgextend) it worked, but done all in one go the internal cache got
corrupted and warnings about checksum errors appeared.
2015-04-09 21:13:55 +01:00
Zdenek Kabelac
249d4a921c tests: extend delay
400 was appeared to be good value in pvmove-abort.sh
so use also in abort-all.
2015-04-09 13:16:53 +02:00
Zdenek Kabelac
1a7c9ce3bd tests: handle debug.log from clvmd
When clvmd starts, it starts it's own command logging into debug.log.
This is interferring with our other command debug.log.
As as sideeffect we may experience log from command,
followed but lots of zeros and continued with clvmd log.

Fix it by renaming debug.log and now we could also print this trace
to get full list of clvmd activity nicely.

Also improve some post-mortem prints from udevadm and dmsetup to
make the output more usable.
2015-04-09 13:13:36 +02:00
Zdenek Kabelac
073643c9a2 tests: slowdown write on dev3 even more 2015-04-08 23:19:38 +02:00
Zdenek Kabelac
ebde60beab tests: use single lvmconf call 2015-04-08 23:19:37 +02:00
Zdenek Kabelac
a5b34f0f1b tests: put "" around dev path 2015-04-08 23:19:37 +02:00
Zdenek Kabelac
4459413225 clvmd: singlenode signals only when lock changes
There is no benefit in waking-up all the waiters
when there is no actual change in lock state.
This avoid some unnecessarily ping-pong effects like:

 Resource V_LVMTEST15724vg retrying lock in mode:WRITE...
 Resource V_LVMTEST15724vg already locked lockid=40, mode:WRITE
 Resource V_LVMTEST15724vg retrying lock in mode:WRITE...
 Resource V_LVMTEST15724vg already locked lockid=40, mode:WRITE
2015-04-08 23:19:34 +02:00
Peter Rajnoha
f32973c78e select: mention { } use in lvm.8 man page and '-S help' properly 2015-04-08 11:14:16 +02:00
Zdenek Kabelac
8fdca0de79 tests: check scsi_debug support opt_blks
Some older kernels (i.e. lenny) do not have such options.
2015-04-07 14:59:13 +02:00
Heinz Mauelshagen
035276ab83 lvcreate: do not silently accept '-m #' with raid4/5/6
If the user provides '-m #' (# > 0) with mappings
raid4/5/6, the command silently creates
'#mirrors * #stripes + #parity' image component pairs.

Patch rejects '-m #' altogether for those mappings
in order to avoid LV creation with unexpected layout.

- resolves bz#1209445
2015-04-07 14:32:25 +02:00
Zdenek Kabelac
64353ff74b tests: when test fails collect more info
In some case it might be worth to know some more surrouding info
when command has crashed.

So collect  tables and some udev db content in this case.
2015-04-07 13:40:15 +02:00
Zdenek Kabelac
ba049e203b tests: skip clvmd testing of mirrored LV vgsplit
There is something wrong when even inactive LV can't be splitted
without cmirrord being present for clustered VG.
2015-04-03 20:14:26 +02:00
Zdenek Kabelac
87cb0a3e9f tests: change default to 30s.
Keep rather the default lower and avoid to pass it with every call.
2015-04-03 19:40:43 +02:00
Zdenek Kabelac
32a0f625a5 tests: slow down devices in outer loop
Since now we have metadata parts running with normal speed,
we could avoid reinitilising delayed dev for every test.
(Saving seconds on cookie waits...)
2015-04-03 19:40:42 +02:00
Zdenek Kabelac
4f94669eca pvmove: don't crash when name is not found
If the device name is not found in our metadata,
we cannot call strdup few lines later with NULL name.

More intersting story goes behind how it happens -
pvmove removal is unfortunatelly 'multi-state' process
and at some point (for now)  we have in lvm2 metadata
LV  pvmove0 as stripe  and mirror image as error.

If such metadata are left - we fail with any further removal.
2015-04-03 17:18:11 +02:00
Zdenek Kabelac
c88ffbf9df tests: delay only data portion of device 2015-04-03 17:18:11 +02:00
Zdenek Kabelac
93ab6d5184 tests: better check for empty set
Even when no arg is passed - there is still one "" arg there...
So taky it easy and check for empty string instead.
2015-04-03 16:38:05 +02:00
Zdenek Kabelac
ce3c61c4af tests: delay only data area 2015-04-03 14:54:22 +02:00
Zdenek Kabelac
385457de23 tests: test update
Really wait till fsck is running (sleep 2 is not ideal)
Use new  'delay_dev'.
2015-04-03 14:54:22 +02:00
Zdenek Kabelac
d3a591a7b3 tests: hide unwanted output 2015-04-03 14:54:22 +02:00
Zdenek Kabelac
dc41859220 tests: enhance delay_dev
Use common code for error_dev & delay_dev.
Both functions now take list of sectors.

From now on we could delay just 'extent' section, while
keeping running  lvm commands fast (having native metadata area).
2015-04-03 14:53:36 +02:00
Zdenek Kabelac
bd84389c68 tests: add get first_extent_sector
Trvial function to figure out sector position of 1st. extent.
2015-04-03 14:20:03 +02:00
Zdenek Kabelac
308f9bcc18 tests: simplify check sysfs_queue
Pass just device name and let figure out
sysfs path inside the function.
2015-04-03 10:27:00 +02:00
Zdenek Kabelac
a701d337d4 tests: slowdown pvmove devs more
Once pvmove is running - slow it even more
since some test machines tend to be very very slow.
2015-04-02 16:02:06 +02:00
Zdenek Kabelac
1966025245 tests: split bigger test
Use separate new test and avoid teardown_devs
in the middle of single test.
2015-04-02 16:01:01 +02:00
Zdenek Kabelac
a16324b0d3 tests: drop check for awk 2015-04-02 13:38:41 +02:00
Zdenek Kabelac
ee65528547 tests: fix test warning
We cannot print TEST WARNING within test shell script
(since it's running in debug mode and thus always prints it)

Use 'should false' trick let the string printed in this case.
So 'non cluster cases' should now end properly.
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
536f5fa0a3 tests: deal with kernel and broken lcm
If the kernel has 'new lcm()' (3.19) it provides wrong
optimal_io_size value for dm device so lvm2 command cannot
create properly aligned devices.

Use 'should' for this case - so test ends with 'TEST WARNING'.
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
7a6e3838e9 tests: add check sysfs_queue
Add check function for content of /sys/block/$1/queue/$2 == $3
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
95dbedb301 tests: move exa test to separate file
Make it visible the 'exa' test passed on an arch.
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
6d1c9a0eb8 tests: more duplicate testing 2015-04-02 13:38:41 +02:00
Zdenek Kabelac
53ef14fca0 debug: log scanned value
Fix verbose print of scanned value for topology attribute.
Result is set afterwards in sectors.
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
e28e22b9e1 lvmcache: skip drop when vg_write lock is not held
Commit 80f4b4b803
introduced undesirable side-effects for lvm2app user
which happens to be our own python binding.

It appear obtaing pvs list keeps global lock.

So restricting this to VG_GLOBAL READ locks and skip
the drop skip if WRITE lock is held.
2015-04-02 13:38:32 +02:00
Ondrej Kozina
f199aeb9ea polldaemon: alter few lines related to interval
we do not allow 0 interval for pvmove command issued
without parameters with classical polldaemon. It would
query the kernel too often with possibly many pvmoves
in-progress.
2015-04-01 20:41:52 +02:00
Ondrej Kozina
7abb7894e4 polldaemon: separate daemon_parms initialisation 2015-04-01 20:41:39 +02:00
Ondrej Kozina
3929b00466 polldaemon: prepare wrapper poll_daemon function
with lvmpolld we'll have two polldaemon implementations
2015-04-01 20:41:30 +02:00
Ondrej Kozina
65623b63a2 pvmove: split pvmove_update_metadata function
So far pvmove_update_metadata (originaly _update_metadata) was
used for both initial and subsequent metadata updates during polling.
With a new polldaemon (lvmpolld) all operations that require polling
have to be split in two parts: The initiating one and the polling one.
The later step will be used from lvm command spawned by lvmpolld to
monitor and advance the mirror on next segment if required.

1) The initiation part is _update_metadata in pvmove.c which performs
only the first update, setting up the pvmove itself in metadata.

2) pvmove_update_metadata in pvmove_poll.c now handles all other
subsequent metadata updates except the last one.

Due to the split we could remove some code. Also some functions were
moved back to pvmove.c as they were suited for initialisation of pvmove
only.
2015-04-01 20:41:03 +02:00
Ondrej Kozina
5190f56605 lvconvert: move poll code in before refactoring
This commit has no impact on functionality. Code required to
be visible outside lvconvert.c is just moved into new file
lvconvert_poll.c and some calls are made non-static and
declared in new header file lvconvert.h
2015-04-01 20:40:50 +02:00
Ondrej Kozina
a098aa419f pvmove: move poll code in before refactoring
This commit has no impact on functionality. Code required to
be visible outside pvmove.c is just moved into new file
pvmove_poll.c and some calls are made non-static and declared in
new header file pvmove.h
2015-04-01 20:40:39 +02:00
David Teigland
bf2d831e7e tests: add clvm case to system_id.sh 2015-03-31 14:45:14 -05:00
Peter Rajnoha
20c6192fbb systemd: stop lvm2-monitor.service before dm-event.service 2015-03-31 15:50:16 +02:00
Michael Lass
666738d57a systemd: stop lvm2-pvscan@.service before lvm2-lvmetad.service
When lvm2-pvscan@.service and lvm2-lvmetad.service are scheduled to be
stopped lvm2-pvscan@.service should be stopped first since pvscan uses
lvmetad.

This is especially important if lvm2-lvmetad.socket is also scheduled to
be stopped as in this case connection requests are suppressed causing
pvscan to fail.
2015-03-31 15:47:01 +02:00
Michael Lass
139df7c4a3 README: fix link to lvm-devel mailing list 2015-03-31 15:44:00 +02:00
Peter Rajnoha
974a029a8a lvm.conf: fix typo as -> is in read_only_volume_list comments 2015-03-31 15:38:29 +02:00
Ondrej Kozina
04826db7c4 polldaemon: fix indentation in _poll_vg fn 2015-03-31 13:16:01 +02:00
Ondrej Kozina
663254d7a5 polldaemon: proper error check in _poll_vg fn
could theoretically cause NULL pointer dereference
2015-03-31 11:26:53 +02:00
Ondrej Kozina
b9e6e66de1 tests: add pvmove --abort for all moves in progress
test for bug described in c282a66132
2015-03-30 18:39:30 +02:00
Ondrej Kozina
5f7428e4d5 tests: add pvmove --abort test
test for bug described in c282a66132
2015-03-30 18:39:24 +02:00
Ondrej Kozina
c282a66132 pvmove: fix pvmove --abort or pvmove w/o parameters
_check_lv_status was called from within dm_list_iterate_items cycle.
This was utterly wrong! _check_lv_status may remove more than one LV from
vg->lvs list we iterated in the same time.

In some scenarios this could lead to deadlock iterationg over same LV
indefinitely or segfault depending on the circumstances.

Fixed by moving the _check_lv_status outside iterating the vg->lvs
list.

Note that commit 6e7b24d34f was not enough
as _check_lv_status may result in removal of more than one LV from the list.
2015-03-30 18:38:50 +02:00
Ondrej Kozina
7c66850ce5 tests: add helper routine for pvmove status check 2015-03-30 18:38:50 +02:00
Ondrej Kozina
c8caa04b1c tests: fix check for existence of a pvmove Lv 2015-03-30 18:38:50 +02:00
Alasdair G Kergon
f1e3e99169 alloc: Log PV tags when reserving areas. 2015-03-26 21:13:26 +00:00
Alasdair G Kergon
e8fa3354f0 alloc: Pass alloc_handle through to _reserve_area. 2015-03-26 20:32:59 +00:00
Alasdair G Kergon
f9d74ba3d1 alloc: Only report cling tag errors once. 2015-03-26 19:43:51 +00:00
Alasdair G Kergon
4b1219ee87 metadata: Move alloc_handle init/destroy fns. 2015-03-26 18:44:24 +00:00
Alasdair G Kergon
9506760c7e datastruct: Add str_list_add_list. 2015-03-26 18:30:37 +00:00
Zdenek Kabelac
8a87fadbb0 tests: drop vg2 at end of test 2015-03-26 16:11:29 +01:00
Zdenek Kabelac
22d43ee14a tests: skip system_id test in cluster
Let's see what we can do in cluster for system_id,
until resolved skip test for check_cluster.
2015-03-26 16:10:48 +01:00
Zdenek Kabelac
147b0a1700 tests: pvmove better delay check
Improve testing for condition that pvmove0 is already running in the
table (so we do not kill pvmove while it has loaded target, but
it's not yet Live).

Also delay_dev for 200ms.
2015-03-26 16:03:24 +01:00
Zdenek Kabelac
d24b6cfb1f tests: temporarily trace prepare_vg 2015-03-26 15:11:15 +01:00
Zdenek Kabelac
f08154cc7b tests: update aux
When we use /dev/loopX device - shift first PV1 sector by 1M
so /dev/loop0 and dm device do not appear as same device.

Also notify lvmetad once 'devs' are created - so in case this
command is called in the middle of test - lvmetad properly
drops its metadata for these devices.

Drop used test.img file between reuse so the 'prepare_vg'
always starts with zeroed disks.

When LVM_TEST_AUX_TRACE is set, allow shell tracing of aux commands.
2015-03-26 15:10:31 +01:00
Zdenek Kabelac
b7ebab7657 tests: avoid multiple pids
On some systems (parisc) pgrep prints more then 1 pid
(all thread IDs are printed)
So print only leading pid and avoid 'kill' being confused.
2015-03-26 15:10:04 +01:00
Peter Rajnoha
0bffd99daa tests: move thin-related test from select-tools.sh to select-tools-thin.sh
And skip this test if thin target is not available.
2015-03-24 10:12:27 +01:00
Peter Rajnoha
9dbe2d760f tests: select-tools.sh: add test for fix in commit c9f021de0b 2015-03-24 09:50:35 +01:00
Peter Rajnoha
8759f7d755 metadata: vg: add removed_lvs field to collect LVs which have been removed
Do not keep dangling LVs if they're removed from the vg->lvs list and
move them to vg->removed_lvs instead (this is actually similar to already
existing vg->removed_pvs list, just it's for LVs now).

Once we have this vg->removed_lvs list indexed so it's possible to
do lookups for LVs quickly, we can remove the LV_REMOVED flag as
that one won't be needed anymore - instead of checking the flag,
we can directly check the vg->removed_lvs list if the LV is present
there or not and to say if the LV is removed or not then. For now,
we don't have this index, but it may be implemented in the future.
2015-03-24 08:43:08 +01:00
Peter Rajnoha
c9f021de0b metadata: process_each_lv_in_vg: get the list of LVs to process first, then do the processing
This avoids a problem in which we're using selection on LV list - we
need to do the selection on initial state and not on any intermediary
state as we process LVs one by one - some of the relations among LVs
can be gone during this processing.

For example, processing one LV can cause the other LVs to lose the
relation to this LV and hence they're not selectable anymore with
the original selection criteria as it would be if we did selection
on inital state. A perfect example is with thin snapshots:

$ lvs -o lv_name,origin,layout,role vg
  LV    Origin Layout      Role
  lvol1        thin,sparse public,origin,thinorigin,multithinorigin
  lvol2 lvol1  thin,sparse public,snapshot,thinsnapshot
  lvol3 lvol1  thin,sparse public,snapshot,thinsnapshot
  pool         thin,pool   private

$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
  Logical volume "lvol1" successfully removed

The lvremove command above was supposed to remove lvol1 as well as
all its snapshots which have origin=lvol1. It failed to do so, because
once we removed the origin lvol1, the lvol2 and lvol3 which were
snapshots before are not snapshots anymore - the relations change
as we're processing these LVs one by one.

If we do the selection first and then execute any concrete actions on
these LVs (which is what this patch does), the behaviour is correct
then - the selection is done on the *initial state*:

$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
  Logical volume "lvol1" successfully removed
  Logical volume "lvol2" successfully removed
  Logical volume "lvol3" successfully removed

Similarly for all the other situations in which relations among
LVs are being changed by processing the LVs one by one.

This patch also introduces LV_REMOVED internal LV status flag
to mark removed LVs so they're not processed further when we
iterate over collected list of LVs to be processed.

Previously, when we iterated directly over vg->lvs list to
process the LVs, we relied on the fact that once the LV is removed,
it is also removed from the vg->lvs list we're iterating over.
But that was incorrect as we shouldn't remove LVs from the list
during one iteration while we're iterating over that exact list
(dm_list_iterate_items safe can handle only one removal at
one iteration anyway, so it can't be used here).
2015-03-24 08:43:07 +01:00
Alasdair G Kergon
83587f0555 post-release 2015-03-24 02:02:07 +00:00
473 changed files with 36404 additions and 6012 deletions

View File

@@ -1,6 +1,6 @@
#
# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
# Copyright (C) 2004-2010 Red Hat, Inc. All rights reserved.
# Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
@@ -15,6 +15,8 @@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = @top_builddir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
SUBDIRS = conf daemons include lib libdaemon libdm man scripts tools
@@ -91,10 +93,44 @@ cscope.out:
all: cscope.out
endif
DISTCLEAN_TARGETS += cscope.out
CLEAN_DIRS += autom4te.cache
check check_system check_cluster check_local check_lvmetad unit: all
$(MAKE) -C test $(@)
conf.generate: tools
# how to use parenthesis in makefiles
leftparen:=(
LVM_VER := $(firstword $(subst $(leftparen), ,$(LVM_VERSION)))
VER := LVM2.$(LVM_VER)
# release file name
FILE_VER := $(VER).tgz
CLEAN_TARGETS += $(FILE_VER)
CLEAN_DIRS += $(rpmbuilddir)
dist:
@echo "Generating $(FILE_VER)";\
(cd $(top_srcdir); git ls-tree -r HEAD --name-only | xargs tar --transform "s,^,$(VER)/," -c) | gzip >$(FILE_VER)
rpm: dist
$(RM) -r $(rpmbuilddir)/SOURCES
$(MKDIR_P) $(rpmbuilddir)/SOURCES
$(LN_S) -f $(abs_top_builddir)/$(FILE_VER) $(rpmbuilddir)/SOURCES
$(LN_S) -f $(abs_top_srcdir)/spec/build.inc $(rpmbuilddir)/SOURCES
$(LN_S) -f $(abs_top_srcdir)/spec/macros.inc $(rpmbuilddir)/SOURCES
$(LN_S) -f $(abs_top_srcdir)/spec/packages.inc $(rpmbuilddir)/SOURCES
DM_VER=$$(cut -d- -f1 $(top_srcdir)/VERSION_DM);\
GIT_VER=$$(cd $(top_srcdir); git describe | cut -d- --output-delimiter=. -f2,3 || echo 0);\
sed -e "s,\(device_mapper_version\) [0-9.]*$$,\1 $$DM_VER," \
-e "s,^\(Version:[^0-9%]*\)[0-9.]*$$,\1 $(LVM_VER)," \
-e "s,^\(Release:[^0-9%]*\)[0-9.]\+,\1 $$GIT_VER," \
$(top_srcdir)/spec/source.inc >$(rpmbuilddir)/SOURCES/source.inc
rpmbuild -v --define "_topdir $(rpmbuilddir)" -ba $(top_srcdir)/spec/lvm2.spec
generate: conf.generate
$(MAKE) -C conf generate
install_system_dirs:
$(INSTALL_DIR) $(DESTDIR)$(DEFAULT_SYS_DIR)
$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_ARCHIVE_DIR)
@@ -155,7 +191,7 @@ lcov: $(LCOV_TRACES)
$(RM) -r $(LCOV_REPORTS_DIR)
$(MKDIR_P) $(LCOV_REPORTS_DIR)
for i in $(LCOV_TRACES); do \
test -s $$i && lc="$$lc $$i"; \
test -s $$i -a $$(wc -w <$$i) -ge 100 && lc="$$lc $$i"; \
done; \
test -z "$$lc" || $(GENHTML) -p @abs_top_builddir@ \
-o $(LCOV_REPORTS_DIR) $$lc
@@ -187,3 +223,13 @@ memcheck: test-programs
ruby-test:
$(RUBY) report-generators/test/ts.rb
endif
ifneq ($(shell which ctags),)
.PHONY: tags
all: tags
tags:
test -z "$(shell find $(top_srcdir) -type f -name '*.[ch]' -newer tags | head -1)" || $(RM) tags
test -f tags || find $(top_srcdir) -maxdepth 4 -type f -name '*.[ch]' -exec ctags -a '{}' +
DISTCLEAN_TARGETS += tags
endif

2
README
View File

@@ -18,7 +18,7 @@ Mailing list for general discussion related to LVM2:
Mailing lists for LVM2 development, patches and commits:
lvm-devel@redhat.com
Subscribe from https://www.redhat.com/mailman/listinfo/linux-lvm
Subscribe from https://www.redhat.com/mailman/listinfo/lvm-devel
lvm2-commits@lists.fedorahosted.org (Read-only archive of commits)
Subscribe from https://fedorahosted.org/mailman/listinfo/lvm2-commits

View File

@@ -1 +1 @@
2.02.118(2)-git (2015-03-24)
2.02.126(2)-git (2015-07-07)

View File

@@ -1 +1 @@
1.02.95-git (2015-03-24)
1.02.103-git (2015-07-07)

139
WHATS_NEW
View File

@@ -1,3 +1,142 @@
Version 2.02.126 -
================================
Change handling empty LVM_LOG_FILE_EPOCH.
Fix alloc segfault when extending LV with fewer stripes than in first seg.
Fix handling of cache policy name.
Set cache policy before with the first lvm2 cache pool metadata commit.
Fix detection of thin-pool overprovisioning (2.02.124).
Fix lvmpolld segfaults on 32 bit architectures.
Add lvmlockd lock_args validation to vg_validate.
Fix ignored --startstopservices option if running lvmconf with systemd.
Hide sanlock LVs when processing LVs in VG unless named or --all used.
Version 2.02.125 - 7th July 2015
================================
Fix getline memory usage in lvmpolld.
Add support --clear-needs-check-flag for cache_check of cache pool metadata.
Add lvmetactl for developer use only.
Rename global/lock_retries to lvmlockd_retries.
Replace --enable-lvmlockd by --enable-lockd-sanlock and --enable-lockd-dlm.
Version 2.02.124 - 3rd July 2015
================================
Move sending thin pool messages from resume to suspend phase.
Report warning when pool is overprovisioned and not auto resized.
Recognize free-form date/time values for lv_time field in selection criteria.
Added experimental lvmlockd with configure --enable-lvmlockd.
Fix regression in select to match string fields if using synonyms (2.02.123).
Fix regression when printing more lv names via display_lvname (2.02.122).
Add missing error logging to unlock_vg and sync_local_dev_names callers.
Version 2.02.123 - 30th June 2015
=================================
Add report/time_format lvm.conf option to define time format for report.
Fix makefile shell compare == when building lvmetad lvmpolld (2.02.120).
Add --type full to lvmconfig for full configuration tree view.
Add undocumented environment variables to lvm man page. (2.02.119)
Add device synchronization point before activating a new snapshot.
Add --withspaces to lvmconfig to add spaces in output for better readability.
Add custom main function to libdaemon.
Use lvmetad to track out-of-date metadata discovered.
Version 2.02.122 - 20th June 2015
=================================
Flush stdout before printing to stderr.
Use pre-allocated buffer for printed LV names in display_lvname.
Support thins with size of external origin unaligned with thin pool chunk.
Allow extension of reduced thin volumes with external origins.
Consider snapshot and origin LV as unusable if component devices suspended.
Fix lvmconfig segfault on settings with undefined default value (2.02.120).
Add explicit 's' (shared) LV activation mode.
Ignore hyphens in long options names (i.e. --long-option == --longoption).
Version 2.02.121 - 12th June 2015
=================================
Distinguish between on-disk and lvmetad versions of text metadata.
Remove DL_LIBS from Makefiles for daemons that don't need them.
Zero errno in before strtoul call in dmsetup if tested after the call.
Zero errno in before strtoul call in lvmpolld.
Fix a segfault in pvscan --cache --background command.
Fix test for AREA_PV when checking for failed mirrors.
Do not use --sysinit in lvm2-activation{-early,-net}.service if lvmpolld used.
Maintain outdated PV info in lvmetad till all old metadata is gone from disk.
Do not fail polling when poll LV not found (already finished or removed).
Replace poll_get_copy_vg/lv fns with vg_read() and find_lv() in polldaemon.
Close all device fds only in before sleep call in polldaemon.
Simplify Makefile targets that generate exported symbols.
Move various -D settings from Makefiles to configure.h.
Version 2.02.120 - 15th May 2015
================================
Make various adjustments to Makefile compilation flags.
Add lvmpolld debug message class.
Add lvmpolld client mode for querying running server instance for status info.
Fix some libdaemon socket creation and reuse error paths.
Daemons (libdaemon) support exit on idle also in non-systemd environment.
Provide make dist and make rpm targets
Configure lvm.conf for use_lvmetad and use_lvmpolld.
Add lvpoll for cmdline communication with lvmpolld.
Add lvmpolld acting as a free-standing version of polldaemon.
Avoid repeated identical lvmetad VG lookups in commands processing all VGs.
Handle switches to alternative duplicate PVs efficiently with lvmetad.
Properly validate PV size for pvcreate --restorefile.
Fix check if pvcreate wiped device (2.02.117).
Fix storing of vgid when caching metadata (2.02.118).
Fix recursive lvm-config man page. (2.02.119)
Refactor polldaemon interfaces to poll every operation by VG/LV couple
Skip wait after testing in _wait_for_single_lv when polling finished
Return 'None' in python for empty string properties instead of crashing.
Distinguish signed numerical property type in reports for lvm2app library.
Reread raid completion status immediately when progress appears to be zero.
lvm2app closes locking on lvm_quit().
Configure detects /run or /var/run.
Add missing newline in clvmd --help output.
Version 2.02.119 - 2nd May 2015
===============================
New LVM_LOG_FILE_EPOCH, LVM_EXPECTED_EXIT_STATUS env vars. Man page to follow.
Remove detailed content from lvm.conf man page: use lvmconfig instead.
Generate complete config files with lvmconfig or 'make generate'.
Also display info on deprecated config with lvmconfig --withcomments.
Display version since which config is deprecated in lvmconfig --withversions.
Add --showdeprecated to lvmconfig to also display deprecated settings.
Hide deprecated settings in lvmconfig output for all types but current,diff.
Introduce support for exit on idle feature in libdaemon
Add --showunsupported to lvmconfig to also display unsupported settings.
Display unsupported settings for lvmconfig --type current,diff only by default
Honour lvmconfig --ignoreunsupported and --ignoreadvanced for all --type.
Make python bindings usable with python3 (and compatible with 2.6 & 2.7).
Add lvmconfig -l|--list as shortcut for lvmconfig --type list --withsummary.
Add lvmconfig --type list to display plain list of configuration settings.
Introduce lvmconfig as the preferred form of 'lvm dumpconfig'.
Add lv_ancestors and lv_descendants reporting fields.
Add --ignorelocal option to dumpconfig to ignore the local section.
Close connection to lvmetad after fork.
Make lvchange able to resume background pvmove polling again.
Split pvmove update metadata fn in an initial one and a subsequent one.
Refactor shared pvmove and lvconvert code into new _poll files.
Add --unconfigured option to dumpconfig to print strings unconfigured.
Add --withsummary option to dumpconfig to print first line - summary comment.
Use number of device holders to help choose between duplicate PVs.
Try to make lvmetad and non-lvmetad duplicate PV handling as similar as poss.
Issue warnings about duplicate PVs discovered by lvmetad.
Track alternative devices with matching PVIDs in lvmetad.
Check for lvm binary in blkdeactivate and skip LVM processing if not present.
Add --enable-halvm and --disable-halvm options to lvmconf script.
Add --services, --mirrorservice and --startstopservices option to lvmconf.
Use proper default value of global/use_lvmetad when processing lvmconf script.
Respect allocation/cling_tag_list during intial contiguous allocation.
Add A_PARTITION_BY_TAGS set when allocated areas should not share tags.
Make changes persist with python addTag/removeTag.
Set correct vgid when updating cache when writing PV metadata.
More efficient clvmd singlenode locking emulation.
Reject lvcreate -m with raid4/5/6 to avoid unexpected layout.
Don't skip invalidation of cached orphans if vg write lck is held (2.02.118).
Log relevant PV tags when using cling allocation.
Add str_list_add_list() to combine two lists.
Fix LV processing with selection to always do the selection on initial state.
Add internal LV_REMOVED LV status flag.
Version 2.02.118 - 23rd March 2015
==================================
Store metadata size + checksum in lvmcache and add struct lvmcache_vgsummary.

View File

@@ -1,3 +1,55 @@
Version 1.02.103 -
================================
Version 1.02.102 - 7th July 2015
================================
Include tool.h for default non-library use.
Introduce format macros with embedded % such as FMTu64.
Version 1.02.101 - 3rd July 2015
================================
Add experimental support to passing messages in suspend tree.
Add dm_report_value_cache_{set,get} to support caching during report/select.
Add dm_report_reserved_handler to handle report reserved value actions.
Support dynamic value in select: DM_REPORT_FIELD_RESERVED_VALUE_DYNAMIC_VALUE.
Support fuzzy names in select: DM_REPORT_FIELD_RESERVED_VALUE_FUZZY_NAMES.
Thin pool trace messages show a device name and major:minor.
Version 1.02.100 - 30th June 2015
=================================
Add since, after, until and before time operators to be used in selection.
Add support for time in reports and selection: DM_REPORT_FIELD_TYPE_TIME.
Support report reserved value ranges: DM_REPORT_FIELD_RESERVED_VALUE_RANGE.
Support report reserved value names: DM_REPORT_FIELD_RESERVED_VALUE_NAMED.
Add DM_CONFIG_VALUE_FMT_{INT_OCTAL,STRING_NO_QUOTES} config value format flag.
Add DM_CONFIG_VALUE_FMT_COMMON_{ARRAY,EXTRA_SPACE} config value format flag.
Add dm_config_value_{get,set}_format_flags to get and set config value format.
Version 1.02.99 - 20th June 2015
================================
New dm_tree_node_set_thin_pool_read_only(DM_1_02_99) for read-only thin pool.
Enhance error message when thin-pool message fails.
Fix dmeventd logging to avoid threaded use of static variable.
Remove redundant dmeventd SIGALRM coded.
Version 1.02.98 - 12th June 2015
================================
Add dm_task_get_errno() to return any unexpected errno from a dm ioctl call.
Use copy of errno made after each dm ioctl call in case errno changes later.
Version 1.02.97 - 15th May 2015
===============================
New dm_task_get_info(DM_1_02_97) supports internal_suspend state.
New symbols are versioned and comes with versioned symbol name (DM_1_02_97).
Version 1.02.96 - 2nd May 2015
==============================
Fix selection to not match if using reserved value in criteria with >,<,>=,<.
Fix selection to not match reserved values for size fields if using >,<,>=,<.
Include uuid or device number in log message after ioctl failure.
Add DM_INTERNAL_SUSPEND_FLAG to dm-ioctl.h.
Install blkdeactivate script and its man page with make install_device-mapper.
Version 1.02.95 - 15th March 2015
=================================
Makefile regenerated.

4
aclocal.m4 vendored
View File

@@ -1,6 +1,6 @@
# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
# generated automatically by aclocal 1.15 -*- Autoconf -*-
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,

View File

@@ -26,6 +26,10 @@ include $(top_builddir)/make.tmpl
.PHONY: install_conf install_localconf install_profiles
generate:
(cat $(top_srcdir)/conf/example.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --ignorelocal --withspaces) > example.conf.in
(cat $(top_srcdir)/conf/lvmlocal.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --withspaces local) > lvmlocal.conf.in
install_conf: $(CONFSRC)
@if [ ! -e $(confdir)/$(CONFDEST) ]; then \
echo "$(INSTALL_WDATA) -D $< $(confdir)/$(CONFDEST)"; \

23
conf/example.conf.base Normal file
View File

@@ -0,0 +1,23 @@
# This is an example configuration file for the LVM2 system.
# It contains the default settings that would be used if there was no
# @DEFAULT_SYS_DIR@/lvm.conf file.
#
# Refer to 'man lvm.conf' for further information including the file layout.
#
# Refer to 'man lvm.conf' for information about how settings configured in
# this file are combined with built-in values and command line options to
# arrive at the final values used by LVM.
#
# Refer to 'man lvmconfig' for information about displaying the built-in
# and configured values used by LVM.
#
# If a default value is set in this file (not commented out), then a
# new version of LVM using this file will continue using that value,
# even if the new version of LVM changes the built-in default value.
#
# To put this file in a different directory and override @DEFAULT_SYS_DIR@ set
# the environment variable LVM_SYSTEM_DIR before running the tools.
#
# N.B. Take care that each setting only appears once if uncommenting
# example settings in this file.

File diff suppressed because it is too large Load Diff

19
conf/lvmlocal.conf.base Normal file
View File

@@ -0,0 +1,19 @@
# This is a local configuration file template for the LVM2 system
# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .
#
# Refer to 'man lvm.conf' for information about the file layout.
#
# To put this file in a different directory and override
# @DEFAULT_SYS_DIR@ set the environment variable LVM_SYSTEM_DIR before
# running the tools.
#
# The lvmlocal.conf file is normally expected to contain only the
# "local" section which contains settings that should not be shared or
# repeated among different hosts. (But if other sections are present,
# they *will* get processed. Settings in this file override equivalent
# ones in lvm.conf and are in turn overridden by ones in any enabled
# lvm_<tag>.conf files.)
#
# Please take care that each setting only appears once if uncommenting
# example settings in this file and never copy this file between hosts.

View File

@@ -1,17 +1,6 @@
# This is a local configuration file template for the LVM2 system
# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .
#
# This file allows you to assign a unique identity to a host running
# LVM2 that is permitted to access storage devices visible to more than
# one machine simultaneously.
#
# You must ensure that every such host uses a different system_id
# identifier, otherwise LVM2 cannot protect you from simultaneous
# access from multiple hosts and possible data corruption.
#
# Refer to 'man lvmsystemid' for information about the correct ways
# to use this and its limitations.
#
# Refer to 'man lvm.conf' for information about the file layout.
#
# To put this file in a different directory and override
@@ -26,29 +15,43 @@
# lvm_<tag>.conf files.)
#
# Please take care that each setting only appears once if uncommenting
# example settings in this file and never copy this file between
# hosts to avoid accidentally assigning the same system ID to
# more than one host!
# example settings in this file and never copy this file between hosts.
# Configuration section local.
# LVM settings that are specific to the local host.
local {
# This defines the system ID of the local host. This is used
# when global/system_id_source is set to "lvmlocal" in the main
# configuration file, conventionally @DEFAULT_SYS_DIR@/lvm.conf.
# When used, it must be set to a unique value - often a hostname -
# across all the hosts sharing access to the storage.
#
# By default, no system_id is set.
# system_id = ""
#
# Set the system_id to the string "host1".
# system_id = "host1"
# This defines a list of extra system_ids other than the local
# system_id that the local host is allowed to access. These are
# used for all values of global/system_id_source except "none".
#
# Only use this if you have read 'man lvmsystemid' and you are sure
# you understand why you need to use it!
#
# extra_system_ids = []
# Configuration option local/system_id.
# Defines the local system ID for lvmlocal mode.
# This is used when global/system_id_source is set
# to 'lvmlocal' in the main configuration file,
# e.g. lvm.conf.
# When used, it must be set to a unique value
# among all hosts sharing access to the storage,
# e.g. a host name.
# Example:
# Set no system ID.
# system_id = ""
# Example:
# Set the system_id to the string 'host1'.
# system_id = "host1"
# system_id = ""
# Configuration option local/extra_system_ids.
# A list of extra VG system IDs the local host can access.
# VGs with the system IDs listed here (in addition
# to the host's own system ID) can be fully accessed
# by the local host. (These are system IDs that the
# host sees in VGs, not system IDs that identify the
# local host, which is determined by system_id_source.)
# Use this only after consulting 'man lvmsystemid'
# to be certain of correct usage and possible dangers.
# This configuration option does not have a default value defined.
# Configuration option local/host_id.
# The lvmlockd sanlock host_id.
# This must be a unique among all hosts,
# and must be between 1 and 2000.
# host_id = 0
}

559
configure vendored
View File

@@ -636,6 +636,8 @@ kerneldir
interface
CMIRRORD_PIDFILE
CLVMD_PIDFILE
LVMLOCKD_PIDFILE
LVMPOLLD_PIDFILE
LVMETAD_PIDFILE
DMEVENTD_PIDFILE
WRITE_INSTALL
@@ -647,6 +649,7 @@ UDEV_SYNC
UDEV_RULES
UDEV_PC
THIN
TESTSUITE_DATA
TESTING
STATIC_LINK
STATICDIR
@@ -676,11 +679,9 @@ LVM_LIBAPI
LVM_VERSION
LVM1_FALLBACK
LVM1
LOCALEDIR
LIB_SUFFIX
LDDEPS
JOBS
INTL_PACKAGE
INTL
HAVE_VALGRIND
HAVE_REALTIME
@@ -690,15 +691,14 @@ FSADM
ELDFLAGS
DM_LIB_PATCHLEVEL
DM_LIB_VERSION
DM_IOCTLS
DM_DEVICE_UID
DM_DEVICE_MODE
DM_DEVICE_GID
DM_COMPAT
DMEVENTD_PATH
DMEVENTD
DL_LIBS
DEVMAPPER
DEFAULT_USE_LVMLOCKD
DEFAULT_USE_LVMPOLLD
DEFAULT_USE_LVMETAD
DEFAULT_USE_BLKID_WIPING
DEFAULT_SYS_DIR
DEFAULT_SPARSE_SEGTYPE
DEFAULT_RUN_DIR
@@ -706,6 +706,7 @@ DEFAULT_RAID10_SEGTYPE
DEFAULT_PROFILE_SUBDIR
DEFAULT_PID_DIR
DEFAULT_MIRROR_SEGTYPE
DEFAULT_FALLBACK_TO_LVM1
DEFAULT_LOCK_DIR
DEFAULT_DM_RUN_DIR
DEFAULT_DATA_ALIGNMENT
@@ -724,10 +725,13 @@ CLDWHOLEARCHIVE
CLDNOWHOLEARCHIVE
CLDFLAGS
CACHE
BUILD_LOCKDDLM
BUILD_LOCKDSANLOCK
BUILD_LVMLOCKD
BUILD_LVMPOLLD
BUILD_LVMETAD
BUILD_DMEVENTD
BUILD_CMIRRORD
BLKID_WIPING
BLKID_PC
APPLIB
MODPROBE_CMD
@@ -742,6 +746,10 @@ SYSTEMD_LIBS
SYSTEMD_CFLAGS
BLKID_LIBS
BLKID_CFLAGS
LOCKD_DLM_LIBS
LOCKD_DLM_CFLAGS
LOCKD_SANLOCK_LIBS
LOCKD_SANLOCK_CFLAGS
VALGRIND_LIBS
VALGRIND_CFLAGS
CUNIT_LIBS
@@ -895,6 +903,7 @@ with_cache_check
with_cache_dump
with_cache_repair
with_cache_restore
enable_cache_check_needs_check
enable_readline
enable_realtime
enable_ocf
@@ -913,7 +922,15 @@ enable_testing
enable_valgrind_pool
enable_devmapper
enable_lvmetad
enable_lvmpolld
enable_lockd_sanlock
enable_lockd_dlm
enable_use_lvmlockd
with_lvmlockd_pidfile
enable_use_lvmetad
with_lvmetad_pidfile
enable_use_lvmpolld
with_lvmpolld_pidfile
enable_blkid_wiping
enable_udev_systemd_background_jobs
enable_udev_sync
@@ -992,6 +1009,10 @@ CUNIT_CFLAGS
CUNIT_LIBS
VALGRIND_CFLAGS
VALGRIND_LIBS
LOCKD_SANLOCK_CFLAGS
LOCKD_SANLOCK_LIBS
LOCKD_DLM_CFLAGS
LOCKD_DLM_LIBS
BLKID_CFLAGS
BLKID_LIBS
SYSTEMD_CFLAGS
@@ -1616,6 +1637,8 @@ Optional Features:
device-mapper is missing from the kernel
--disable-thin_check_needs_check
required if thin_check version is < 0.3.0
--disable-cache_check_needs_check
required if cache_check version is < 0.5
--disable-readline disable readline support
--enable-realtime enable realtime clock support
--enable-ocf enable Open Cluster Framework (OCF) compliant
@@ -1627,6 +1650,12 @@ Optional Features:
--enable-valgrind-pool enable valgrind awareness of pools
--disable-devmapper disable LVM2 device-mapper interaction
--enable-lvmetad enable the LVM Metadata Daemon
--enable-lvmpolld enable the LVM Polling Daemon
--enable-lockd-sanlock enable the LVM lock daemon using sanlock
--enable-lockd-dlm enable the LVM lock daemon using dlm
--disable-use-lvmlockd disable usage of LVM lock daemon
--disable-use-lvmetad disable usage of LVM Metadata Daemon
--disable-use-lvmpolld disable usage of LVM Poll Daemon
--disable-blkid_wiping disable libblkid detection of signatures when wiping
and use native code instead
--disable-udev-systemd-background-jobs
@@ -1698,11 +1727,11 @@ Optional Packages:
--with-ocfdir=DIR install OCF files in
[PREFIX/lib/ocf/resource.d/lvm2]
--with-default-pid-dir=PID_DIR
Default directory to keep PID files in. [/var/run]
Default directory to keep PID files in. [autodetect]
--with-default-dm-run-dir=DM_RUN_DIR
Default DM run directory. [/var/run]
Default DM run directory. [autodetect]
--with-default-run-dir=RUN_DIR
Default LVM run directory. [/var/run/lvm]
Default LVM run directory. [autodetect_run_dir/lvm]
--with-clvmd=TYPE build cluster LVM Daemon
The following cluster manager combinations are valid:
* cman (RHEL5 or equivalent)
@@ -1716,9 +1745,13 @@ Optional Packages:
--with-cmirrord-pidfile=PATH
cmirrord pidfile [PID_DIR/cmirrord.pid]
--with-optimisation=OPT C optimisation flag [OPT=-O2]
--with-lvmlockd-pidfile=PATH
lvmlockd pidfile [PID_DIR/lvmlockd.pid]
--with-lvmetad-pidfile=PATH
lvmetad pidfile [PID_DIR/lvmetad.pid]
--with-localedir=DIR translation files in DIR [PREFIX/share/locale]
--with-lvmpolld-pidfile=PATH
lvmpolld pidfile [PID_DIR/lvmpolld.pid]
--with-localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--with-confdir=DIR configuration files in DIR [/etc]
--with-staticdir=DIR static binaries in DIR [EPREFIX/sbin]
--with-usrlibdir=DIR usrlib in DIR [PREFIX/lib]
@@ -1802,6 +1835,14 @@ Some influential environment variables:
C compiler flags for VALGRIND, overriding pkg-config
VALGRIND_LIBS
linker flags for VALGRIND, overriding pkg-config
LOCKD_SANLOCK_CFLAGS
C compiler flags for LOCKD_SANLOCK, overriding pkg-config
LOCKD_SANLOCK_LIBS
linker flags for LOCKD_SANLOCK, overriding pkg-config
LOCKD_DLM_CFLAGS
C compiler flags for LOCKD_DLM, overriding pkg-config
LOCKD_DLM_LIBS
linker flags for LOCKD_DLM, overriding pkg-config
BLKID_CFLAGS
C compiler flags for BLKID, overriding pkg-config
BLKID_LIBS linker flags for BLKID, overriding pkg-config
@@ -3020,10 +3061,11 @@ test -n "$target_alias" &&
NONENONEs,x,x, &&
program_prefix=${target_alias}-
if test -z "$CFLAGS"; then :
COPTIMISE_FLAG="-O2"
fi
case "$host_os" in
linux*)
CFLAGS="$CFLAGS"
COPTIMISE_FLAG="-O2"
CLDFLAGS="$CLDFLAGS -Wl,--version-script,.export.sym"
ELDFLAGS="-Wl,--export-dynamic"
# FIXME Generate list and use --dynamic-list=.dlopen.sym
@@ -3033,6 +3075,10 @@ case "$host_os" in
LIB_SUFFIX=so
DEVMAPPER=yes
LVMETAD=no
LVMPOLLD=no
LVMLOCKD=no
LOCKDSANLOCK=no
LOCKDDLM=no
ODIRECT=yes
DM_IOCTLS=yes
SELINUX=yes
@@ -3042,7 +3088,6 @@ case "$host_os" in
;;
darwin*)
CFLAGS="$CFLAGS -no-cpp-precomp -fno-common"
COPTIMISE_FLAG="-O2"
CLDFLAGS="$CLDFLAGS"
ELDFLAGS=
CLDWHOLEARCHIVE="-all_load"
@@ -3170,6 +3215,8 @@ fi
test -n "$AWK" && break
done
save_CFLAGS=$CFLAGS
save_CXXFLAGS=$CXXFLAGS
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -4216,6 +4263,8 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CFLAGS=$save_CFLAGS
CXXFLAGS=$save_CXXFLAGS
ac_ext=c
@@ -7303,6 +7352,9 @@ $as_echo "$ac_cv_flag_HAVE_FULL_RELRO" >&6; }
################################################################################
if test "$prefix" = NONE; then
datarootdir=${ac_default_prefix}/share
fi
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking file owner" >&5
@@ -7345,6 +7397,11 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DM_DEVICE_UID" >&5
$as_echo "$DM_DEVICE_UID" >&6; }
cat >>confdefs.h <<_ACEOF
#define DM_DEVICE_UID $DM_DEVICE_UID
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking device node gid" >&5
$as_echo_n "checking device node gid... " >&6; }
@@ -7360,6 +7417,11 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DM_DEVICE_GID" >&5
$as_echo "$DM_DEVICE_GID" >&6; }
cat >>confdefs.h <<_ACEOF
#define DM_DEVICE_GID $DM_DEVICE_GID
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking device node mode" >&5
$as_echo_n "checking device node mode... " >&6; }
@@ -7375,6 +7437,11 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DM_DEVICE_MODE" >&5
$as_echo "$DM_DEVICE_MODE" >&6; }
cat >>confdefs.h <<_ACEOF
#define DM_DEVICE_MODE $DM_DEVICE_MODE
_ACEOF
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking when to create device nodes" >&5
$as_echo_n "checking when to create device nodes... " >&6; }
@@ -7436,11 +7503,19 @@ fi
$as_echo "$LVM1_FALLBACK" >&6; }
if test "$LVM1_FALLBACK" = yes; then
DEFAULT_FALLBACK_TO_LVM1=1
$as_echo "#define LVM1_FALLBACK 1" >>confdefs.h
else
DEFAULT_FALLBACK_TO_LVM1=0
fi
cat >>confdefs.h <<_ACEOF
#define DEFAULT_FALLBACK_TO_LVM1 $DEFAULT_FALLBACK_TO_LVM1
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to include support for lvm1 metadata" >&5
$as_echo_n "checking whether to include support for lvm1 metadata... " >&6; }
@@ -8245,6 +8320,14 @@ $as_echo "#define CACHE_INTERNAL 1" >>confdefs.h
*) as_fn_error $? "--with-cache parameter invalid" "$LINENO" 5 ;;
esac
# Check whether --enable-cache_check_needs_check was given.
if test "${enable_cache_check_needs_check+set}" = set; then :
enableval=$enable_cache_check_needs_check; CACHE_CHECK_NEEDS_CHECK=$enableval
else
CACHE_CHECK_NEEDS_CHECK=yes
fi
# Test if necessary cache tools are available
# if not - use plain defaults and warn user
case "$CACHE" in
@@ -8356,6 +8439,23 @@ $as_echo "$as_me: WARNING: cache_check not found in path $PATH" >&2;}
CACHE_CONFIGURE_WARN=y
fi
fi
if test "$CACHE_CHECK_NEEDS_CHECK" = yes; then
CACHE_CHECK_VSN=`"$CACHE_CHECK_CMD" -V 2>/dev/null`
CACHE_CHECK_VSN_MAJOR=`echo "$CACHE_CHECK_VSN" | $AWK -F '.' '{print $1}'`
CACHE_CHECK_VSN_MINOR=`echo "$CACHE_CHECK_VSN" | $AWK -F '.' '{print $2}'`
if test -z "$CACHE_CHECK_VSN_MAJOR" -o -z "$CACHE_CHECK_VSN_MINOR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $CACHE_CHECK_CMD: Bad version \"$CACHE_CHECK_VSN\" found" >&5
$as_echo "$as_me: WARNING: $CACHE_CHECK_CMD: Bad version \"$CACHE_CHECK_VSN\" found" >&2;}
CACHE_CHECK_VERSION_WARN=y
CACHE_CHECK_NEEDS_CHECK=no
elif test "$CACHE_CHECK_VSN_MAJOR" -eq 0 -a "$CACHE_CHECK_VSN_MINOR" -lt 5; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $CACHE_CHECK_CMD: Old version \"$CACHE_CHECK_VSN\" found" >&5
$as_echo "$as_me: WARNING: $CACHE_CHECK_CMD: Old version \"$CACHE_CHECK_VSN\" found" >&2;}
CACHE_CHECK_VERSION_WARN=y
CACHE_CHECK_NEEDS_CHECK=no
fi
fi
# Empty means a config way to ignore cache dumping
if test "$CACHE_DUMP_CMD" = "autodetect"; then
if test -n "$ac_tool_prefix"; then
@@ -8677,6 +8777,16 @@ $as_echo "$as_me: WARNING: cache_restore not found in path $PATH" >&2;}
CACHE_CONFIGURE_WARN=y
}
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cache_check supports the needs-check flag" >&5
$as_echo_n "checking whether cache_check supports the needs-check flag... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CACHE_CHECK_NEEDS_CHECK" >&5
$as_echo "$CACHE_CHECK_NEEDS_CHECK" >&6; }
if test "$CACHE_CHECK_NEEDS_CHECK" = yes; then
$as_echo "#define CACHE_CHECK_NEEDS_CHECK 1" >>confdefs.h
fi
;;
esac
@@ -8951,13 +9061,19 @@ fi
}
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default run directory" >&5
$as_echo_n "checking for default run directory... " >&6; }
RUN_DIR="/run"
test -d "/run" || RUN_DIR="/var/run"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $RUN_DIR" >&5
$as_echo "$RUN_DIR" >&6; }
# Check whether --with-default-pid-dir was given.
if test "${with_default_pid_dir+set}" = set; then :
withval=$with_default_pid_dir; DEFAULT_PID_DIR="$withval"
else
DEFAULT_PID_DIR="/var/run"
DEFAULT_PID_DIR=$RUN_DIR
fi
@@ -8972,7 +9088,7 @@ _ACEOF
if test "${with_default_dm_run_dir+set}" = set; then :
withval=$with_default_dm_run_dir; DEFAULT_DM_RUN_DIR="$withval"
else
DEFAULT_DM_RUN_DIR="/var/run"
DEFAULT_DM_RUN_DIR=$RUN_DIR
fi
@@ -8987,7 +9103,7 @@ _ACEOF
if test "${with_default_run_dir+set}" = set; then :
withval=$with_default_run_dir; DEFAULT_RUN_DIR="$withval"
else
DEFAULT_RUN_DIR="/var/run/lvm"
DEFAULT_RUN_DIR="$RUN_DIR/lvm"
fi
@@ -10700,6 +10816,16 @@ $as_echo "yes" >&6; }
fi
fi
################################################################################
TESTSUITE_DATA='${datarootdir}/lvm2-testsuite'
# double eval needed ${datarootdir} -> ${prefix}/share -> real path
cat >>confdefs.h <<_ACEOF
#define TESTSUITE_DATA "$(eval echo $(eval echo $TESTSUITE_DATA))"
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable valgrind awareness of pools" >&5
$as_echo_n "checking whether to enable valgrind awareness of pools... " >&6; }
@@ -10829,7 +10955,281 @@ $as_echo "$LVMETAD" >&6; }
BUILD_LVMETAD=$LVMETAD
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lvmpolld" >&5
$as_echo_n "checking whether to build lvmpolld... " >&6; }
# Check whether --enable-lvmpolld was given.
if test "${enable_lvmpolld+set}" = set; then :
enableval=$enable_lvmpolld; LVMPOLLD=$enableval
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LVMPOLLD" >&5
$as_echo "$LVMPOLLD" >&6; }
BUILD_LVMPOLLD=$LVMPOLLD
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lockdsanlock" >&5
$as_echo_n "checking whether to build lockdsanlock... " >&6; }
# Check whether --enable-lockd-sanlock was given.
if test "${enable_lockd_sanlock+set}" = set; then :
enableval=$enable_lockd_sanlock; LOCKDSANLOCK=$enableval
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LOCKDSANLOCK" >&5
$as_echo "$LOCKDSANLOCK" >&6; }
BUILD_LOCKDSANLOCK=$LOCKDSANLOCK
if test "$BUILD_LOCKDSANLOCK" = yes; then
$as_echo "#define LOCKDSANLOCK_SUPPORT 1" >>confdefs.h
fi
################################################################################
if test "$BUILD_LOCKDSANLOCK" = yes; then
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LOCKD_SANLOCK" >&5
$as_echo_n "checking for LOCKD_SANLOCK... " >&6; }
if test -n "$LOCKD_SANLOCK_CFLAGS"; then
pkg_cv_LOCKD_SANLOCK_CFLAGS="$LOCKD_SANLOCK_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsanlock_client\""; } >&5
($PKG_CONFIG --exists --print-errors "libsanlock_client") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LOCKD_SANLOCK_CFLAGS=`$PKG_CONFIG --cflags "libsanlock_client" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$LOCKD_SANLOCK_LIBS"; then
pkg_cv_LOCKD_SANLOCK_LIBS="$LOCKD_SANLOCK_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsanlock_client\""; } >&5
($PKG_CONFIG --exists --print-errors "libsanlock_client") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LOCKD_SANLOCK_LIBS=`$PKG_CONFIG --libs "libsanlock_client" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
LOCKD_SANLOCK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsanlock_client" 2>&1`
else
LOCKD_SANLOCK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsanlock_client" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LOCKD_SANLOCK_PKG_ERRORS" >&5
$bailout
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$bailout
else
LOCKD_SANLOCK_CFLAGS=$pkg_cv_LOCKD_SANLOCK_CFLAGS
LOCKD_SANLOCK_LIBS=$pkg_cv_LOCKD_SANLOCK_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
HAVE_LOCKD_SANLOCK=yes
fi
BUILD_LVMLOCKD=yes
fi
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lockddlm" >&5
$as_echo_n "checking whether to build lockddlm... " >&6; }
# Check whether --enable-lockd-dlm was given.
if test "${enable_lockd_dlm+set}" = set; then :
enableval=$enable_lockd_dlm; LOCKDDLM=$enableval
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LOCKDDLM" >&5
$as_echo "$LOCKDDLM" >&6; }
BUILD_LOCKDDLM=$LOCKDDLM
if test "$BUILD_LOCKDDLM" = yes; then
$as_echo "#define LOCKDDLM_SUPPORT 1" >>confdefs.h
fi
################################################################################
if test "$BUILD_LOCKDDLM" = yes; then
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LOCKD_DLM" >&5
$as_echo_n "checking for LOCKD_DLM... " >&6; }
if test -n "$LOCKD_DLM_CFLAGS"; then
pkg_cv_LOCKD_DLM_CFLAGS="$LOCKD_DLM_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdlm\""; } >&5
($PKG_CONFIG --exists --print-errors "libdlm") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LOCKD_DLM_CFLAGS=`$PKG_CONFIG --cflags "libdlm" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test -n "$LOCKD_DLM_LIBS"; then
pkg_cv_LOCKD_DLM_LIBS="$LOCKD_DLM_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdlm\""; } >&5
($PKG_CONFIG --exists --print-errors "libdlm") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LOCKD_DLM_LIBS=`$PKG_CONFIG --libs "libdlm" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
else
pkg_failed=untried
fi
if test $pkg_failed = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
LOCKD_DLM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdlm" 2>&1`
else
LOCKD_DLM_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdlm" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LOCKD_DLM_PKG_ERRORS" >&5
$bailout
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$bailout
else
LOCKD_DLM_CFLAGS=$pkg_cv_LOCKD_DLM_CFLAGS
LOCKD_DLM_LIBS=$pkg_cv_LOCKD_DLM_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
HAVE_LOCKD_DLM=yes
fi
BUILD_LVMLOCKD=yes
fi
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lvmlockd" >&5
$as_echo_n "checking whether to build lvmlockd... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_LVMLOCKD" >&5
$as_echo "$BUILD_LVMLOCKD" >&6; }
if test "$BUILD_LVMLOCKD" = yes; then
if test -n "$BUILD_LVMPOLLD"; then :
BUILD_LVMPOLLD=yes; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Enabling lvmpolld - required by lvmlockd." >&5
$as_echo "$as_me: WARNING: Enabling lvmpolld - required by lvmlockd." >&2;}
fi
if test -n "$BUILD_LVMETAD"; then :
BUILD_LVMETAD=yes; { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Enabling lvmetad - required by lvmlockd." >&5
$as_echo "$as_me: WARNING: Enabling lvmetad - required by lvmlockd." >&2;}
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking defaults for use_lvmlockd" >&5
$as_echo_n "checking defaults for use_lvmlockd... " >&6; }
# Check whether --enable-use_lvmlockd was given.
if test "${enable_use_lvmlockd+set}" = set; then :
enableval=$enable_use_lvmlockd; case ${enableval} in
yes) DEFAULT_USE_LVMLOCKD=1 ;;
*) DEFAULT_USE_LVMLOCKD=0 ;;
esac
else
DEFAULT_USE_LVMLOCKD=1
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEFAULT_USE_LVMLOCKD" >&5
$as_echo "$DEFAULT_USE_LVMLOCKD" >&6; }
$as_echo "#define LVMLOCKD_SUPPORT 1" >>confdefs.h
# Check whether --with-lvmlockd-pidfile was given.
if test "${with_lvmlockd_pidfile+set}" = set; then :
withval=$with_lvmlockd_pidfile; LVMLOCKD_PIDFILE=$withval
else
LVMLOCKD_PIDFILE="$DEFAULT_PID_DIR/lvmlockd.pid"
fi
cat >>confdefs.h <<_ACEOF
#define LVMLOCKD_PIDFILE "$LVMLOCKD_PIDFILE"
_ACEOF
else
DEFAULT_USE_LVMLOCKD=0
fi
cat >>confdefs.h <<_ACEOF
#define DEFAULT_USE_LVMLOCKD $DEFAULT_USE_LVMLOCKD
_ACEOF
################################################################################
if test "$BUILD_LVMETAD" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking defaults for use_lvmetad" >&5
$as_echo_n "checking defaults for use_lvmetad... " >&6; }
# Check whether --enable-use_lvmetad was given.
if test "${enable_use_lvmetad+set}" = set; then :
enableval=$enable_use_lvmetad; case ${enableval} in
yes) DEFAULT_USE_LVMETAD=1 ;;
*) DEFAULT_USE_LVMETAD=0 ;;
esac
else
DEFAULT_USE_LVMETAD=1
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEFAULT_USE_LVMETAD" >&5
$as_echo "$DEFAULT_USE_LVMETAD" >&6; }
$as_echo "#define LVMETAD_SUPPORT 1" >>confdefs.h
@@ -10847,9 +11247,59 @@ cat >>confdefs.h <<_ACEOF
#define LVMETAD_PIDFILE "$LVMETAD_PIDFILE"
_ACEOF
else
DEFAULT_USE_LVMETAD=0
fi
cat >>confdefs.h <<_ACEOF
#define DEFAULT_USE_LVMETAD $DEFAULT_USE_LVMETAD
_ACEOF
################################################################################
if test "$BUILD_LVMPOLLD" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking defaults for use_lvmpolld" >&5
$as_echo_n "checking defaults for use_lvmpolld... " >&6; }
# Check whether --enable-use_lvmpolld was given.
if test "${enable_use_lvmpolld+set}" = set; then :
enableval=$enable_use_lvmpolld; case ${enableval} in
yes) DEFAULT_USE_LVMPOLLD=1 ;;
*) DEFAULT_USE_LVMPOLLD=0 ;;
esac
else
DEFAULT_USE_LVMPOLLD=1
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEFAULT_USE_LVMPOLLD" >&5
$as_echo "$DEFAULT_USE_LVMPOLLD" >&6; }
$as_echo "#define LVMPOLLD_SUPPORT 1" >>confdefs.h
# Check whether --with-lvmpolld-pidfile was given.
if test "${with_lvmpolld_pidfile+set}" = set; then :
withval=$with_lvmpolld_pidfile; LVMPOLLD_PIDFILE=$withval
else
LVMPOLLD_PIDFILE="$DEFAULT_PID_DIR/lvmpolld.pid"
fi
cat >>confdefs.h <<_ACEOF
#define LVMPOLLD_PIDFILE "$LVMPOLLD_PIDFILE"
_ACEOF
else
DEFAULT_USE_LVMPOLLD=0
fi
cat >>confdefs.h <<_ACEOF
#define DEFAULT_USE_LVMPOLLD $DEFAULT_USE_LVMPOLLD
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable libblkid detection of signatures when wiping" >&5
$as_echo_n "checking whether to enable libblkid detection of signatures when wiping... " >&6; }
# Check whether --enable-blkid_wiping was given.
@@ -10945,12 +11395,22 @@ $as_echo "yes" >&6; }
fi
if test "$BLKID_WIPING" = yes; then
BLKID_PC="blkid"
DEFAULT_USE_BLKID_WIPING=1
$as_echo "#define BLKID_WIPING_SUPPORT 1" >>confdefs.h
else
DEFAULT_USE_BLKID_WIPING=1
fi
else
DEFAULT_USE_BLKID_WIPING=0
fi
cat >>confdefs.h <<_ACEOF
#define DEFAULT_USE_BLKID_WIPING $DEFAULT_USE_BLKID_WIPING
_ACEOF
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use udev-systemd protocol for jobs in background" >&5
$as_echo_n "checking whether to use udev-systemd protocol for jobs in background... " >&6; }
@@ -11204,8 +11664,11 @@ else
fi
if test "$DM_COMPAT" = yes; then
as_fn_error $? "--enable-compat is not currently supported.
if test "$DM_COMPAT" = yes; then :
$as_echo "#define DM_COMPAT 1" >>confdefs.h
as_fn_error $? "--enable-compat is not currently supported.
Since device-mapper version 1.02.66, only one version (4) of the device-mapper
ioctl protocol is supported." "$LINENO" 5
fi
@@ -11231,6 +11694,11 @@ if test "${enable_ioctl+set}" = set; then :
enableval=$enable_ioctl; DM_IOCTLS=$enableval
fi
if test "$DM_IOCTLS" = yes; then :
$as_echo "#define DM_IOCTLS 1" >>confdefs.h
fi
################################################################################
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable O_DIRECT" >&5
@@ -12309,18 +12777,30 @@ else
MSGFMT="$ac_cv_path_MSGFMT"
fi
if [ -z "$MSGFMT" ]; then
as_fn_error $? "msgfmt not found in path $PATH" "$LINENO" 5
fi
if test -z "$MSGFMT"; then :
as_fn_error $? "msgfmt not found in path $PATH" "$LINENO" 5
fi
# Check whether --with-localedir was given.
if test "${with_localedir+set}" = set; then :
withval=$with_localedir; LOCALEDIR=$withval
withval=$with_localedir; localedir=$withval
else
LOCALEDIR='${prefix}/share/locale'
localedir=${localedir-'${datarootdir}/locale'}
fi
cat >>confdefs.h <<_ACEOF
#define INTL_PACKAGE "$INTL_PACKAGE"
_ACEOF
# double eval needed ${datarootdir} -> ${prefix}/share -> real path
cat >>confdefs.h <<_ACEOF
#define LOCALEDIR "$(eval echo $(eval echo $localedir))"
_ACEOF
fi
################################################################################
@@ -13136,13 +13616,17 @@ LVM_LIBAPI=`echo "$VER" | $AWK -F '[()]' '{print $2}'`
################################################################################
ac_config_files="$ac_config_files Makefile make.tmpl daemons/Makefile daemons/clvmd/Makefile daemons/cmirrord/Makefile daemons/dmeventd/Makefile daemons/dmeventd/libdevmapper-event.pc daemons/dmeventd/plugins/Makefile daemons/dmeventd/plugins/lvm2/Makefile daemons/dmeventd/plugins/raid/Makefile daemons/dmeventd/plugins/mirror/Makefile daemons/dmeventd/plugins/snapshot/Makefile daemons/dmeventd/plugins/thin/Makefile daemons/lvmetad/Makefile conf/Makefile conf/example.conf conf/lvmlocal.conf conf/command_profile_template.profile conf/metadata_profile_template.profile include/.symlinks include/Makefile lib/Makefile lib/format1/Makefile lib/format_pool/Makefile lib/locking/Makefile lib/mirror/Makefile lib/replicator/Makefile lib/misc/lvm-version.h lib/raid/Makefile lib/snapshot/Makefile lib/thin/Makefile lib/cache_segtype/Makefile libdaemon/Makefile libdaemon/client/Makefile libdaemon/server/Makefile libdm/Makefile libdm/libdevmapper.pc liblvm/Makefile liblvm/liblvm2app.pc man/Makefile po/Makefile python/Makefile python/setup.py scripts/blkdeactivate.sh scripts/blk_availability_init_red_hat scripts/blk_availability_systemd_red_hat.service scripts/clvmd_init_red_hat scripts/cmirrord_init_red_hat scripts/dm_event_systemd_red_hat.service scripts/dm_event_systemd_red_hat.socket scripts/lvm2_cluster_activation_red_hat.sh scripts/lvm2_cluster_activation_systemd_red_hat.service scripts/lvm2_clvmd_systemd_red_hat.service scripts/lvm2_cmirrord_systemd_red_hat.service scripts/lvm2_lvmetad_init_red_hat scripts/lvm2_lvmetad_systemd_red_hat.service scripts/lvm2_lvmetad_systemd_red_hat.socket scripts/lvm2_monitoring_init_red_hat scripts/lvm2_monitoring_systemd_red_hat.service scripts/lvm2_pvscan_systemd_red_hat@.service scripts/lvm2_tmpfiles_red_hat.conf scripts/Makefile test/Makefile test/api/Makefile test/unit/Makefile tools/Makefile udev/Makefile unit-tests/datastruct/Makefile unit-tests/regex/Makefile unit-tests/mm/Makefile"
ac_config_files="$ac_config_files Makefile make.tmpl daemons/Makefile daemons/clvmd/Makefile daemons/cmirrord/Makefile daemons/dmeventd/Makefile daemons/dmeventd/libdevmapper-event.pc daemons/dmeventd/plugins/Makefile daemons/dmeventd/plugins/lvm2/Makefile daemons/dmeventd/plugins/raid/Makefile daemons/dmeventd/plugins/mirror/Makefile daemons/dmeventd/plugins/snapshot/Makefile daemons/dmeventd/plugins/thin/Makefile daemons/lvmetad/Makefile daemons/lvmpolld/Makefile daemons/lvmlockd/Makefile conf/Makefile conf/example.conf conf/lvmlocal.conf conf/command_profile_template.profile conf/metadata_profile_template.profile include/.symlinks include/Makefile lib/Makefile lib/format1/Makefile lib/format_pool/Makefile lib/locking/Makefile lib/mirror/Makefile lib/replicator/Makefile lib/misc/lvm-version.h lib/raid/Makefile lib/snapshot/Makefile lib/thin/Makefile lib/cache_segtype/Makefile libdaemon/Makefile libdaemon/client/Makefile libdaemon/server/Makefile libdm/Makefile libdm/libdevmapper.pc liblvm/Makefile liblvm/liblvm2app.pc man/Makefile po/Makefile python/Makefile python/setup.py scripts/blkdeactivate.sh scripts/blk_availability_init_red_hat scripts/blk_availability_systemd_red_hat.service scripts/clvmd_init_red_hat scripts/cmirrord_init_red_hat scripts/dm_event_systemd_red_hat.service scripts/dm_event_systemd_red_hat.socket scripts/lvm2_cluster_activation_red_hat.sh scripts/lvm2_cluster_activation_systemd_red_hat.service scripts/lvm2_clvmd_systemd_red_hat.service scripts/lvm2_cmirrord_systemd_red_hat.service scripts/lvm2_lvmetad_init_red_hat scripts/lvm2_lvmetad_systemd_red_hat.service scripts/lvm2_lvmetad_systemd_red_hat.socket scripts/lvm2_lvmpolld_init_red_hat scripts/lvm2_lvmpolld_systemd_red_hat.service scripts/lvm2_lvmpolld_systemd_red_hat.socket scripts/lvm2_lvmlockd_systemd_red_hat.service scripts/lvm2_lvmlocking_systemd_red_hat.service scripts/lvm2_monitoring_init_red_hat scripts/lvm2_monitoring_systemd_red_hat.service scripts/lvm2_pvscan_systemd_red_hat@.service scripts/lvm2_tmpfiles_red_hat.conf scripts/Makefile test/Makefile test/api/Makefile test/unit/Makefile tools/Makefile udev/Makefile unit-tests/datastruct/Makefile unit-tests/regex/Makefile unit-tests/mm/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -13851,6 +14335,8 @@ do
"daemons/dmeventd/plugins/snapshot/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmeventd/plugins/snapshot/Makefile" ;;
"daemons/dmeventd/plugins/thin/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmeventd/plugins/thin/Makefile" ;;
"daemons/lvmetad/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/lvmetad/Makefile" ;;
"daemons/lvmpolld/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/lvmpolld/Makefile" ;;
"daemons/lvmlockd/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/lvmlockd/Makefile" ;;
"conf/Makefile") CONFIG_FILES="$CONFIG_FILES conf/Makefile" ;;
"conf/example.conf") CONFIG_FILES="$CONFIG_FILES conf/example.conf" ;;
"conf/lvmlocal.conf") CONFIG_FILES="$CONFIG_FILES conf/lvmlocal.conf" ;;
@@ -13894,6 +14380,11 @@ do
"scripts/lvm2_lvmetad_init_red_hat") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmetad_init_red_hat" ;;
"scripts/lvm2_lvmetad_systemd_red_hat.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmetad_systemd_red_hat.service" ;;
"scripts/lvm2_lvmetad_systemd_red_hat.socket") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmetad_systemd_red_hat.socket" ;;
"scripts/lvm2_lvmpolld_init_red_hat") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmpolld_init_red_hat" ;;
"scripts/lvm2_lvmpolld_systemd_red_hat.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmpolld_systemd_red_hat.service" ;;
"scripts/lvm2_lvmpolld_systemd_red_hat.socket") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmpolld_systemd_red_hat.socket" ;;
"scripts/lvm2_lvmlockd_systemd_red_hat.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmlockd_systemd_red_hat.service" ;;
"scripts/lvm2_lvmlocking_systemd_red_hat.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_lvmlocking_systemd_red_hat.service" ;;
"scripts/lvm2_monitoring_init_red_hat") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_monitoring_init_red_hat" ;;
"scripts/lvm2_monitoring_systemd_red_hat.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_monitoring_systemd_red_hat.service" ;;
"scripts/lvm2_pvscan_systemd_red_hat@.service") CONFIG_FILES="$CONFIG_FILES scripts/lvm2_pvscan_systemd_red_hat@.service" ;;
@@ -14500,14 +14991,22 @@ $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
test -n "$THIN_CONFIGURE_WARN" && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Support for thin provisioning is limited since some thin provisioning tools are missing!" >&5
if test -n "$THIN_CONFIGURE_WARN"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Support for thin provisioning is limited since some thin provisioning tools are missing!" >&5
$as_echo "$as_me: WARNING: Support for thin provisioning is limited since some thin provisioning tools are missing!" >&2;}
fi
test -n "$THIN_CHECK_VERSION_WARN" && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning" >&5
if test -n "$THIN_CHECK_VERSION_WARN"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning" >&5
$as_echo "$as_me: WARNING: You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning" >&2;}
fi
test -n "$CACHE_CONFIGURE_WARN" && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Support for cache is limited since some cache tools are missing!" >&5
if test -n "$CACHE_CONFIGURE_WARN"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Support for cache is limited since some cache tools are missing!" >&5
$as_echo "$as_me: WARNING: Support for cache is limited since some cache tools are missing!" >&2;}
fi
test "$ODIRECT" = yes || { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: O_DIRECT disabled: low-memory pvmove may lock up" >&5
if test "$ODIRECT" != yes; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: O_DIRECT disabled: low-memory pvmove may lock up" >&5
$as_echo "$as_me: WARNING: O_DIRECT disabled: low-memory pvmove may lock up" >&2;}
fi

View File

@@ -1,6 +1,6 @@
###############################################################################
## Copyright (C) 2000-2004 Sistina Software, Inc. All rights reserved.
## Copyright (C) 2004-2014 Red Hat, Inc. All rights reserved.
## Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
##
## This copyrighted material is made available to anyone wishing to use,
## modify, copy, or redistribute it subject to the terms and conditions
@@ -26,10 +26,9 @@ AC_CONFIG_AUX_DIR(autoconf)
dnl -- Get system type
AC_CANONICAL_TARGET([])
AS_IF([test -z "$CFLAGS"], [COPTIMISE_FLAG="-O2"])
case "$host_os" in
linux*)
CFLAGS="$CFLAGS"
COPTIMISE_FLAG="-O2"
CLDFLAGS="$CLDFLAGS -Wl,--version-script,.export.sym"
ELDFLAGS="-Wl,--export-dynamic"
# FIXME Generate list and use --dynamic-list=.dlopen.sym
@@ -39,6 +38,10 @@ case "$host_os" in
LIB_SUFFIX=so
DEVMAPPER=yes
LVMETAD=no
LVMPOLLD=no
LVMLOCKD=no
LOCKDSANLOCK=no
LOCKDDLM=no
ODIRECT=yes
DM_IOCTLS=yes
SELINUX=yes
@@ -48,7 +51,6 @@ case "$host_os" in
;;
darwin*)
CFLAGS="$CFLAGS -no-cpp-precomp -fno-common"
COPTIMISE_FLAG="-O2"
CLDFLAGS="$CLDFLAGS"
ELDFLAGS=
CLDWHOLEARCHIVE="-all_load"
@@ -68,8 +70,12 @@ esac
dnl -- Checks for programs.
AC_PROG_SED
AC_PROG_AWK
save_CFLAGS=$CFLAGS
save_CXXFLAGS=$CXXFLAGS
AC_PROG_CC
AC_PROG_CXX
CFLAGS=$save_CFLAGS
CXXFLAGS=$save_CXXFLAGS
dnl probably no longer needed in 2008, but...
AC_PROG_GCC_TRADITIONAL
@@ -168,6 +174,9 @@ AC_SUBST(HAVE_FULL_RELRO)
################################################################################
dnl -- Prefix is /usr by default, the exec_prefix default is setup later
AC_PREFIX_DEFAULT(/usr)
if test "$prefix" = NONE; then
datarootdir=${ac_default_prefix}/share
fi
################################################################################
dnl -- Setup the ownership of the files
@@ -198,6 +207,7 @@ AC_ARG_WITH(device-uid,
[set the owner used for new device nodes [UID=0]]),
DM_DEVICE_UID=$withval, DM_DEVICE_UID=0)
AC_MSG_RESULT($DM_DEVICE_UID)
AC_DEFINE_UNQUOTED([DM_DEVICE_UID], [$DM_DEVICE_UID], [Define default owner for device node])
################################################################################
dnl -- Setup device group ownership
@@ -208,6 +218,7 @@ AC_ARG_WITH(device-gid,
[set the group used for new device nodes [GID=0]]),
DM_DEVICE_GID=$withval, DM_DEVICE_GID=0)
AC_MSG_RESULT($DM_DEVICE_GID)
AC_DEFINE_UNQUOTED([DM_DEVICE_GID], [$DM_DEVICE_GID], [Define default group for device node])
################################################################################
dnl -- Setup device mode
@@ -218,6 +229,7 @@ AC_ARG_WITH(device-mode,
[set the mode used for new device nodes [MODE=0600]]),
DM_DEVICE_MODE=$withval, DM_DEVICE_MODE=0600)
AC_MSG_RESULT($DM_DEVICE_MODE)
AC_DEFINE_UNQUOTED([DM_DEVICE_MODE], [$DM_DEVICE_MODE], [Define default mode for device node])
AC_MSG_CHECKING(when to create device nodes)
AC_ARG_WITH(device-nodes-on,
@@ -257,8 +269,13 @@ AC_ARG_ENABLE(lvm1_fallback,
AC_MSG_RESULT($LVM1_FALLBACK)
if test "$LVM1_FALLBACK" = yes; then
DEFAULT_FALLBACK_TO_LVM1=1
AC_DEFINE([LVM1_FALLBACK], 1, [Define to 1 if 'lvm' should fall back to using LVM1 binaries if device-mapper is missing from the kernel])
else
DEFAULT_FALLBACK_TO_LVM1=0
fi
AC_DEFINE_UNQUOTED(DEFAULT_FALLBACK_TO_LVM1, [$DEFAULT_FALLBACK_TO_LVM1],
[Fall back to LVM1 by default if device-mapper is missing from the kernel.])
################################################################################
dnl -- format1 inclusion type
@@ -546,6 +563,12 @@ case "$CACHE" in
*) AC_MSG_ERROR([--with-cache parameter invalid]) ;;
esac
dnl -- cache_check needs-check flag
AC_ARG_ENABLE(cache_check_needs_check,
AC_HELP_STRING([--disable-cache_check_needs_check],
[required if cache_check version is < 0.5]),
CACHE_CHECK_NEEDS_CHECK=$enableval, CACHE_CHECK_NEEDS_CHECK=yes)
# Test if necessary cache tools are available
# if not - use plain defaults and warn user
case "$CACHE" in
@@ -559,6 +582,21 @@ case "$CACHE" in
CACHE_CONFIGURE_WARN=y
fi
fi
if test "$CACHE_CHECK_NEEDS_CHECK" = yes; then
CACHE_CHECK_VSN=`"$CACHE_CHECK_CMD" -V 2>/dev/null`
CACHE_CHECK_VSN_MAJOR=`echo "$CACHE_CHECK_VSN" | $AWK -F '.' '{print $1}'`
CACHE_CHECK_VSN_MINOR=`echo "$CACHE_CHECK_VSN" | $AWK -F '.' '{print $2}'`
if test -z "$CACHE_CHECK_VSN_MAJOR" -o -z "$CACHE_CHECK_VSN_MINOR"; then
AC_MSG_WARN([$CACHE_CHECK_CMD: Bad version "$CACHE_CHECK_VSN" found])
CACHE_CHECK_VERSION_WARN=y
CACHE_CHECK_NEEDS_CHECK=no
elif test "$CACHE_CHECK_VSN_MAJOR" -eq 0 -a "$CACHE_CHECK_VSN_MINOR" -lt 5; then
AC_MSG_WARN([$CACHE_CHECK_CMD: Old version "$CACHE_CHECK_VSN" found])
CACHE_CHECK_VERSION_WARN=y
CACHE_CHECK_NEEDS_CHECK=no
fi
fi
# Empty means a config way to ignore cache dumping
if test "$CACHE_DUMP_CMD" = "autodetect"; then
AC_PATH_TOOL(CACHE_DUMP_CMD, cache_dump)
@@ -586,6 +624,12 @@ case "$CACHE" in
CACHE_CONFIGURE_WARN=y
}
fi
AC_MSG_CHECKING([whether cache_check supports the needs-check flag])
AC_MSG_RESULT([$CACHE_CHECK_NEEDS_CHECK])
if test "$CACHE_CHECK_NEEDS_CHECK" = yes; then
AC_DEFINE([CACHE_CHECK_NEEDS_CHECK], 1, [Define to 1 if the external 'cache_check' tool requires the --clear-needs-check-flag option])
fi
;;
esac
@@ -645,28 +689,32 @@ pkg_config_init() {
}
################################################################################
AC_MSG_CHECKING(for default run directory)
RUN_DIR="/run"
test -d "/run" || RUN_DIR="/var/run"
AC_MSG_RESULT($RUN_DIR)
dnl -- Set up pidfile and run directory
AH_TEMPLATE(DEFAULT_PID_DIR)
AC_ARG_WITH(default-pid-dir,
AC_HELP_STRING([--with-default-pid-dir=PID_DIR],
[Default directory to keep PID files in. [/var/run]]),
DEFAULT_PID_DIR="$withval", DEFAULT_PID_DIR="/var/run")
[Default directory to keep PID files in. [autodetect]]),
DEFAULT_PID_DIR="$withval", DEFAULT_PID_DIR=$RUN_DIR)
AC_DEFINE_UNQUOTED(DEFAULT_PID_DIR, ["$DEFAULT_PID_DIR"],
[Default directory to keep PID files in.])
AH_TEMPLATE(DEFAULT_DM_RUN_DIR, [Name of default DM run directory.])
AC_ARG_WITH(default-dm-run-dir,
AC_HELP_STRING([--with-default-dm-run-dir=DM_RUN_DIR],
[ Default DM run directory. [/var/run]]),
DEFAULT_DM_RUN_DIR="$withval", DEFAULT_DM_RUN_DIR="/var/run")
[ Default DM run directory. [autodetect]]),
DEFAULT_DM_RUN_DIR="$withval", DEFAULT_DM_RUN_DIR=$RUN_DIR)
AC_DEFINE_UNQUOTED(DEFAULT_DM_RUN_DIR, ["$DEFAULT_DM_RUN_DIR"],
[Default DM run directory.])
AH_TEMPLATE(DEFAULT_RUN_DIR, [Name of default LVM run directory.])
AC_ARG_WITH(default-run-dir,
AC_HELP_STRING([--with-default-run-dir=RUN_DIR],
[Default LVM run directory. [/var/run/lvm]]),
DEFAULT_RUN_DIR="$withval", DEFAULT_RUN_DIR="/var/run/lvm")
[Default LVM run directory. [autodetect_run_dir/lvm]]),
DEFAULT_RUN_DIR="$withval", DEFAULT_RUN_DIR="$RUN_DIR/lvm")
AC_DEFINE_UNQUOTED(DEFAULT_RUN_DIR, ["$DEFAULT_RUN_DIR"],
[Default LVM run directory.])
@@ -1016,6 +1064,13 @@ if test "$TESTING" = yes; then
PKG_CHECK_MODULES(CUNIT, cunit >= 2.0)
fi
################################################################################
dnl -- Set LVM2 testsuite data
TESTSUITE_DATA='${datarootdir}/lvm2-testsuite'
# double eval needed ${datarootdir} -> ${prefix}/share -> real path
AC_DEFINE_UNQUOTED(TESTSUITE_DATA, ["$(eval echo $(eval echo $TESTSUITE_DATA))"], [Path to testsuite data])
################################################################################
dnl -- Enable valgrind awareness of memory pools
AC_MSG_CHECKING(whether to enable valgrind awareness of pools)
@@ -1061,7 +1116,106 @@ AC_MSG_RESULT($LVMETAD)
BUILD_LVMETAD=$LVMETAD
################################################################################
dnl -- Build lvmpolld
AC_MSG_CHECKING(whether to build lvmpolld)
AC_ARG_ENABLE(lvmpolld,
AC_HELP_STRING([--enable-lvmpolld],
[enable the LVM Polling Daemon]),
LVMPOLLD=$enableval)
AC_MSG_RESULT($LVMPOLLD)
BUILD_LVMPOLLD=$LVMPOLLD
################################################################################
dnl -- Build lockdsanlock
AC_MSG_CHECKING(whether to build lockdsanlock)
AC_ARG_ENABLE(lockd-sanlock,
AC_HELP_STRING([--enable-lockd-sanlock],
[enable the LVM lock daemon using sanlock]),
LOCKDSANLOCK=$enableval)
AC_MSG_RESULT($LOCKDSANLOCK)
BUILD_LOCKDSANLOCK=$LOCKDSANLOCK
if test "$BUILD_LOCKDSANLOCK" = yes; then
AC_DEFINE([LOCKDSANLOCK_SUPPORT], 1, [Define to 1 to include code that uses lvmlockd sanlock option.])
fi
################################################################################
dnl -- Look for sanlock libraries
if test "$BUILD_LOCKDSANLOCK" = yes; then
PKG_CHECK_MODULES(LOCKD_SANLOCK, libsanlock_client, [HAVE_LOCKD_SANLOCK=yes], $bailout)
BUILD_LVMLOCKD=yes
fi
################################################################################
dnl -- Build lockddlm
AC_MSG_CHECKING(whether to build lockddlm)
AC_ARG_ENABLE(lockd-dlm,
AC_HELP_STRING([--enable-lockd-dlm],
[enable the LVM lock daemon using dlm]),
LOCKDDLM=$enableval)
AC_MSG_RESULT($LOCKDDLM)
BUILD_LOCKDDLM=$LOCKDDLM
if test "$BUILD_LOCKDDLM" = yes; then
AC_DEFINE([LOCKDDLM_SUPPORT], 1, [Define to 1 to include code that uses lvmlockd dlm option.])
fi
################################################################################
dnl -- Look for dlm libraries
if test "$BUILD_LOCKDDLM" = yes; then
PKG_CHECK_MODULES(LOCKD_DLM, libdlm, [HAVE_LOCKD_DLM=yes], $bailout)
BUILD_LVMLOCKD=yes
fi
################################################################################
dnl -- Build lvmlockd
AC_MSG_CHECKING(whether to build lvmlockd)
AC_MSG_RESULT($BUILD_LVMLOCKD)
if test "$BUILD_LVMLOCKD" = yes; then
AS_IF([test -n "$BUILD_LVMPOLLD"], [BUILD_LVMPOLLD=yes; AC_MSG_WARN([Enabling lvmpolld - required by lvmlockd.])])
AS_IF([test -n "$BUILD_LVMETAD"], [BUILD_LVMETAD=yes; AC_MSG_WARN([Enabling lvmetad - required by lvmlockd.])])
AC_MSG_CHECKING([defaults for use_lvmlockd])
AC_ARG_ENABLE(use_lvmlockd,
AC_HELP_STRING([--disable-use-lvmlockd],
[disable usage of LVM lock daemon]),
[case ${enableval} in
yes) DEFAULT_USE_LVMLOCKD=1 ;;
*) DEFAULT_USE_LVMLOCKD=0 ;;
esac], DEFAULT_USE_LVMLOCKD=1)
AC_MSG_RESULT($DEFAULT_USE_LVMLOCKD)
AC_DEFINE([LVMLOCKD_SUPPORT], 1, [Define to 1 to include code that uses lvmlockd.])
AC_ARG_WITH(lvmlockd-pidfile,
AC_HELP_STRING([--with-lvmlockd-pidfile=PATH],
[lvmlockd pidfile [PID_DIR/lvmlockd.pid]]),
LVMLOCKD_PIDFILE=$withval,
LVMLOCKD_PIDFILE="$DEFAULT_PID_DIR/lvmlockd.pid")
AC_DEFINE_UNQUOTED(LVMLOCKD_PIDFILE, ["$LVMLOCKD_PIDFILE"],
[Path to lvmlockd pidfile.])
else
DEFAULT_USE_LVMLOCKD=0
fi
AC_DEFINE_UNQUOTED(DEFAULT_USE_LVMLOCKD, [$DEFAULT_USE_LVMLOCKD],
[Use lvmlockd by default.])
################################################################################
dnl -- Check lvmetad
if test "$BUILD_LVMETAD" = yes; then
AC_MSG_CHECKING([defaults for use_lvmetad])
AC_ARG_ENABLE(use_lvmetad,
AC_HELP_STRING([--disable-use-lvmetad],
[disable usage of LVM Metadata Daemon]),
[case ${enableval} in
yes) DEFAULT_USE_LVMETAD=1 ;;
*) DEFAULT_USE_LVMETAD=0 ;;
esac], DEFAULT_USE_LVMETAD=1)
AC_MSG_RESULT($DEFAULT_USE_LVMETAD)
AC_DEFINE([LVMETAD_SUPPORT], 1, [Define to 1 to include code that uses lvmetad.])
AC_ARG_WITH(lvmetad-pidfile,
@@ -1071,9 +1225,41 @@ if test "$BUILD_LVMETAD" = yes; then
LVMETAD_PIDFILE="$DEFAULT_PID_DIR/lvmetad.pid")
AC_DEFINE_UNQUOTED(LVMETAD_PIDFILE, ["$LVMETAD_PIDFILE"],
[Path to lvmetad pidfile.])
else
DEFAULT_USE_LVMETAD=0
fi
AC_DEFINE_UNQUOTED(DEFAULT_USE_LVMETAD, [$DEFAULT_USE_LVMETAD],
[Use lvmetad by default.])
################################################################################
dnl -- Check lvmpolld
if test "$BUILD_LVMPOLLD" = yes; then
AC_MSG_CHECKING([defaults for use_lvmpolld])
AC_ARG_ENABLE(use_lvmpolld,
AC_HELP_STRING([--disable-use-lvmpolld],
[disable usage of LVM Poll Daemon]),
[case ${enableval} in
yes) DEFAULT_USE_LVMPOLLD=1 ;;
*) DEFAULT_USE_LVMPOLLD=0 ;;
esac], DEFAULT_USE_LVMPOLLD=1)
AC_MSG_RESULT($DEFAULT_USE_LVMPOLLD)
AC_DEFINE([LVMPOLLD_SUPPORT], 1, [Define to 1 to include code that uses lvmpolld.])
AC_ARG_WITH(lvmpolld-pidfile,
AC_HELP_STRING([--with-lvmpolld-pidfile=PATH],
[lvmpolld pidfile [PID_DIR/lvmpolld.pid]]),
LVMPOLLD_PIDFILE=$withval,
LVMPOLLD_PIDFILE="$DEFAULT_PID_DIR/lvmpolld.pid")
AC_DEFINE_UNQUOTED(LVMPOLLD_PIDFILE, ["$LVMPOLLD_PIDFILE"],
[Path to lvmpolld pidfile.])
else
DEFAULT_USE_LVMPOLLD=0
fi
AC_DEFINE_UNQUOTED(DEFAULT_USE_LVMPOLLD, [$DEFAULT_USE_LVMPOLLD],
[Use lvmpolld by default.])
################################################################################
dnl -- Enable blkid wiping functionality
AC_MSG_CHECKING(whether to enable libblkid detection of signatures when wiping)
AC_ARG_ENABLE(blkid_wiping,
@@ -1093,9 +1279,16 @@ if test "$BLKID_WIPING" != no; then
fi])
if test "$BLKID_WIPING" = yes; then
BLKID_PC="blkid"
DEFAULT_USE_BLKID_WIPING=1
AC_DEFINE([BLKID_WIPING_SUPPORT], 1, [Define to 1 to use libblkid detection of signatures when wiping.])
else
DEFAULT_USE_BLKID_WIPING=1
fi
else
DEFAULT_USE_BLKID_WIPING=0
fi
AC_DEFINE_UNQUOTED(DEFAULT_USE_BLKID_WIPING, [$DEFAULT_USE_BLKID_WIPING],
[Use blkid wiping by default.])
################################################################################
dnl -- Enable udev-systemd protocol to instantiate a service for background jobs
@@ -1168,11 +1361,11 @@ AC_ARG_ENABLE(compat,
[enable support for old device-mapper versions]),
DM_COMPAT=$enableval, DM_COMPAT=no)
if test "$DM_COMPAT" = yes; then
AC_MSG_ERROR([--enable-compat is not currently supported.
AS_IF([test "$DM_COMPAT" = yes],
[AC_DEFINE([DM_COMPAT], 1, [Define to enable compat protocol])
AC_MSG_ERROR([--enable-compat is not currently supported.
Since device-mapper version 1.02.66, only one version (4) of the device-mapper
ioctl protocol is supported.])
fi
ioctl protocol is supported.])])
################################################################################
dnl -- Compatible units suffix mode
@@ -1192,6 +1385,8 @@ AC_ARG_ENABLE(ioctl,
AC_HELP_STRING([--disable-ioctl],
[disable ioctl calls to device-mapper in the kernel]),
DM_IOCTLS=$enableval)
AS_IF([test "$DM_IOCTLS" = yes],
[AC_DEFINE([DM_IOCTLS], 1, [Define to enable ioctls calls to kernel])])
################################################################################
dnl -- Disable O_DIRECT
@@ -1450,14 +1645,16 @@ if test "$INTL" = yes; then
# FIXME - Move this - can be device-mapper too
INTL_PACKAGE="lvm2"
AC_PATH_TOOL(MSGFMT, msgfmt)
if [[ -z "$MSGFMT" ]]; then
AC_MSG_ERROR([msgfmt not found in path $PATH])
fi
AS_IF([test -z "$MSGFMT"], [AC_MSG_ERROR([msgfmt not found in path $PATH])])
AC_ARG_WITH(localedir,
AC_HELP_STRING([--with-localedir=DIR],
[translation files in DIR [PREFIX/share/locale]]),
LOCALEDIR=$withval, LOCALEDIR='${prefix}/share/locale')
[locale-dependent data [DATAROOTDIR/locale]]),
localedir=$withval, localedir=${localedir-'${datarootdir}/locale'})
AC_DEFINE_UNQUOTED([INTL_PACKAGE], ["$INTL_PACKAGE"], [Internalization package])
# double eval needed ${datarootdir} -> ${prefix}/share -> real path
AC_DEFINE_UNQUOTED([LOCALEDIR], ["$(eval echo $(eval echo $localedir))"], [Locale-dependent data])
fi
################################################################################
@@ -1679,10 +1876,13 @@ LVM_LIBAPI=`echo "$VER" | $AWK -F '[[()]]' '{print $2}'`
AC_SUBST(APPLIB)
AC_SUBST(AWK)
AC_SUBST(BLKID_PC)
AC_SUBST(BLKID_WIPING)
AC_SUBST(BUILD_CMIRRORD)
AC_SUBST(BUILD_DMEVENTD)
AC_SUBST(BUILD_LVMETAD)
AC_SUBST(BUILD_LVMPOLLD)
AC_SUBST(BUILD_LVMLOCKD)
AC_SUBST(BUILD_LOCKDSANLOCK)
AC_SUBST(BUILD_LOCKDDLM)
AC_SUBST(CACHE)
AC_SUBST(CFLAGS)
AC_SUBST(CFLOW_CMD)
@@ -1712,6 +1912,7 @@ AC_SUBST(DEFAULT_CACHE_SUBDIR)
AC_SUBST(DEFAULT_DATA_ALIGNMENT)
AC_SUBST(DEFAULT_DM_RUN_DIR)
AC_SUBST(DEFAULT_LOCK_DIR)
AC_SUBST(DEFAULT_FALLBACK_TO_LVM1)
AC_SUBST(DEFAULT_MIRROR_SEGTYPE)
AC_SUBST(DEFAULT_PID_DIR)
AC_SUBST(DEFAULT_PROFILE_SUBDIR)
@@ -1719,17 +1920,16 @@ AC_SUBST(DEFAULT_RAID10_SEGTYPE)
AC_SUBST(DEFAULT_RUN_DIR)
AC_SUBST(DEFAULT_SPARSE_SEGTYPE)
AC_SUBST(DEFAULT_SYS_DIR)
AC_SUBST(DEFAULT_USE_BLKID_WIPING)
AC_SUBST(DEFAULT_USE_LVMETAD)
AC_SUBST(DEFAULT_USE_LVMPOLLD)
AC_SUBST(DEFAULT_USE_LVMLOCKD)
AC_SUBST(DEVMAPPER)
AC_SUBST(DLM_CFLAGS)
AC_SUBST(DLM_LIBS)
AC_SUBST(DL_LIBS)
AC_SUBST(DMEVENTD)
AC_SUBST(DMEVENTD_PATH)
AC_SUBST(DM_COMPAT)
AC_SUBST(DM_DEVICE_GID)
AC_SUBST(DM_DEVICE_MODE)
AC_SUBST(DM_DEVICE_UID)
AC_SUBST(DM_IOCTLS)
AC_SUBST(DM_LIB_VERSION)
AC_SUBST(DM_LIB_PATCHLEVEL)
AC_SUBST(ELDFLAGS)
@@ -1739,12 +1939,10 @@ AC_SUBST(HAVE_LIBDL)
AC_SUBST(HAVE_REALTIME)
AC_SUBST(HAVE_VALGRIND)
AC_SUBST(INTL)
AC_SUBST(INTL_PACKAGE)
AC_SUBST(JOBS)
AC_SUBST(LDDEPS)
AC_SUBST(LIBS)
AC_SUBST(LIB_SUFFIX)
AC_SUBST(LOCALEDIR)
AC_SUBST(LVM1)
AC_SUBST(LVM1_FALLBACK)
AC_SUBST(LVM_VERSION)
@@ -1755,6 +1953,7 @@ AC_SUBST(LVM_PATCHLEVEL)
AC_SUBST(LVM_PATH)
AC_SUBST(LVM_RELEASE)
AC_SUBST(LVM_RELEASE_DATE)
AC_SUBST(localedir)
AC_SUBST(MANGLING)
AC_SUBST(MIRRORS)
AC_SUBST(MSGFMT)
@@ -1782,6 +1981,7 @@ AC_SUBST(SNAPSHOTS)
AC_SUBST(STATICDIR)
AC_SUBST(STATIC_LINK)
AC_SUBST(TESTING)
AC_SUBST(TESTSUITE_DATA)
AC_SUBST(THIN)
AC_SUBST(THIN_CHECK_CMD)
AC_SUBST(THIN_DUMP_CMD)
@@ -1801,6 +2001,8 @@ AC_SUBST(VALGRIND_POOL)
AC_SUBST(WRITE_INSTALL)
AC_SUBST(DMEVENTD_PIDFILE)
AC_SUBST(LVMETAD_PIDFILE)
AC_SUBST(LVMPOLLD_PIDFILE)
AC_SUBST(LVMLOCKD_PIDFILE)
AC_SUBST(CLVMD_PIDFILE)
AC_SUBST(CMIRRORD_PIDFILE)
AC_SUBST(interface)
@@ -1834,6 +2036,8 @@ daemons/dmeventd/plugins/mirror/Makefile
daemons/dmeventd/plugins/snapshot/Makefile
daemons/dmeventd/plugins/thin/Makefile
daemons/lvmetad/Makefile
daemons/lvmpolld/Makefile
daemons/lvmlockd/Makefile
conf/Makefile
conf/example.conf
conf/lvmlocal.conf
@@ -1877,6 +2081,11 @@ scripts/lvm2_cmirrord_systemd_red_hat.service
scripts/lvm2_lvmetad_init_red_hat
scripts/lvm2_lvmetad_systemd_red_hat.service
scripts/lvm2_lvmetad_systemd_red_hat.socket
scripts/lvm2_lvmpolld_init_red_hat
scripts/lvm2_lvmpolld_systemd_red_hat.service
scripts/lvm2_lvmpolld_systemd_red_hat.socket
scripts/lvm2_lvmlockd_systemd_red_hat.service
scripts/lvm2_lvmlocking_systemd_red_hat.service
scripts/lvm2_monitoring_init_red_hat
scripts/lvm2_monitoring_systemd_red_hat.service
scripts/lvm2_pvscan_systemd_red_hat@.service
@@ -1893,10 +2102,14 @@ unit-tests/mm/Makefile
])
AC_OUTPUT
test -n "$THIN_CONFIGURE_WARN" && AC_MSG_WARN([Support for thin provisioning is limited since some thin provisioning tools are missing!])
AS_IF([test -n "$THIN_CONFIGURE_WARN"],
[AC_MSG_WARN([Support for thin provisioning is limited since some thin provisioning tools are missing!])])
test -n "$THIN_CHECK_VERSION_WARN" && AC_MSG_WARN([You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning])
AS_IF([test -n "$THIN_CHECK_VERSION_WARN"],
[AC_MSG_WARN([You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning])])
test -n "$CACHE_CONFIGURE_WARN" && AC_MSG_WARN([Support for cache is limited since some cache tools are missing!])
AS_IF([test -n "$CACHE_CONFIGURE_WARN"],
[AC_MSG_WARN([Support for cache is limited since some cache tools are missing!])])
test "$ODIRECT" = yes || AC_MSG_WARN([O_DIRECT disabled: low-memory pvmove may lock up])
AS_IF([test "$ODIRECT" != yes],
[AC_MSG_WARN([O_DIRECT disabled: low-memory pvmove may lock up])])

View File

@@ -1,5 +1,5 @@
#
# Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
# Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
@@ -15,7 +15,7 @@ srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = @top_builddir@
.PHONY: dmeventd clvmd cmirrord lvmetad
.PHONY: dmeventd clvmd cmirrord lvmetad lvmpolld lvmlockd
ifneq ("@CLVMD@", "none")
SUBDIRS += clvmd
@@ -36,8 +36,16 @@ ifeq ("@BUILD_LVMETAD@", "yes")
SUBDIRS += lvmetad
endif
ifeq ("@BUILD_LVMPOLLD@", "yes")
SUBDIRS += lvmpolld
endif
ifeq ("@BUILD_LVMLOCKD@", "yes")
SUBDIRS += lvmlockd
endif
ifeq ($(MAKECMDGOALS),distclean)
SUBDIRS = clvmd cmirrord dmeventd lvmetad
SUBDIRS = clvmd cmirrord dmeventd lvmetad lvmpolld lvmlockd
endif
include $(top_builddir)/make.tmpl

View File

@@ -36,10 +36,6 @@ SOURCES = \
lvm-functions.c \
refresh_clvmd.c
ifeq ("@DEBUG@", "yes")
DEFS += -DDEBUG
endif
ifneq (,$(findstring cman,, "@CLVMD@,"))
SOURCES += clvmd-cman.c
LMLIBS += $(CMAN_LIBS) $(CONFDB_LIBS) $(DLM_LIBS)

View File

@@ -18,15 +18,10 @@
#ifndef _LVM_CLVMD_COMMON_H
#define _LVM_CLVMD_COMMON_H
#include "configure.h"
#define _REENTRANT
#define _GNU_SOURCE
#define _FILE_OFFSET_BITS 64
#include "libdevmapper.h"
#include "tool.h"
#include "lvm-logging.h"
#include <unistd.h>
#endif

View File

@@ -243,7 +243,7 @@ static void openais_cpg_confchg_callback(cpg_handle_t handle,
struct node_info *ninfo;
DEBUGLOG("confchg callback. %" PRIsize_t " joined, "
"%" PRIsize_t " left, %" PRIsize_t " members\n",
FMTsize_t " left, %" PRIsize_t " members\n",
joined_list_entries, left_list_entries, member_list_entries);
for (i=0; i<joined_list_entries; i++) {

View File

@@ -208,8 +208,6 @@ static int _lock_resource(const char *resource, int mode, int flags, int *lockid
pthread_mutex_lock(&_lock_mutex);
retry:
pthread_cond_broadcast(&_lock_cond); /* to wakeup waiters */
if (!(head = dm_hash_lookup(_locks, resource))) {
if (flags & LCKF_CONVERT) {
/* In real DLM, lock is identified only by lockid, resource is not used */
@@ -269,12 +267,14 @@ retry:
dm_list_add(head, &lck->list);
}
out:
pthread_cond_broadcast(&_lock_cond); /* to wakeup waiters */
pthread_mutex_unlock(&_lock_mutex);
DEBUGLOG("Locked resource %s, lockid=%d, mode=%s\n",
resource, lck->lockid, _get_mode(lck->mode));
return 0;
bad:
pthread_cond_broadcast(&_lock_cond); /* to wakeup waiters */
pthread_mutex_unlock(&_lock_mutex);
DEBUGLOG("Failed to lock resource %s\n", resource);

View File

@@ -172,6 +172,7 @@ static void usage(const char *prog, FILE *file)
#ifdef USE_SINGLENODE
"singlenode "
#endif
"\n"
" -R Tell all running clvmds in the cluster to reload their device cache\n"
" -S Restart clvmd, preserving exclusive locks\n"
" -t<secs> Command timeout (default: 60 seconds)\n"

View File

@@ -16,26 +16,21 @@
* dmeventd - dm event daemon to monitor active mapped devices
*/
#define _GNU_SOURCE
#define _FILE_OFFSET_BITS 64
#include "tool.h"
#include "configure.h"
#include "libdevmapper.h"
#include "libdevmapper-event.h"
#include "dmeventd.h"
//#include "libmultilog.h"
#include "dm-logging.h"
#include <stdarg.h>
#include "libdevmapper-event.h"
#include "dmeventd.h"
#include <dlfcn.h>
#include <errno.h>
#include <pthread.h>
#include <sys/file.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <unistd.h>
#include <signal.h>
#include <arpa/inet.h> /* for htonl, ntohl */
#include <fcntl.h> /* for musl libc */
@@ -133,51 +128,20 @@ void debuglog(const char *fmt, ...)
static const char *decode_cmd(uint32_t cmd)
{
static char buf[128];
const char *command;
switch (cmd) {
case DM_EVENT_CMD_ACTIVE:
command = "ACTIVE";
break;
case DM_EVENT_CMD_REGISTER_FOR_EVENT:
command = "REGISTER_FOR_EVENT";
break;
case DM_EVENT_CMD_UNREGISTER_FOR_EVENT:
command = "UNREGISTER_FOR_EVENT";
break;
case DM_EVENT_CMD_GET_REGISTERED_DEVICE:
command = "GET_REGISTERED_DEVICE";
break;
case DM_EVENT_CMD_GET_NEXT_REGISTERED_DEVICE:
command = "GET_NEXT_REGISTERED_DEVICE";
break;
case DM_EVENT_CMD_SET_TIMEOUT:
command = "SET_TIMEOUT";
break;
case DM_EVENT_CMD_GET_TIMEOUT:
command = "GET_TIMEOUT";
break;
case DM_EVENT_CMD_HELLO:
command = "HELLO";
break;
case DM_EVENT_CMD_DIE:
command = "DIE";
break;
case DM_EVENT_CMD_GET_STATUS:
command = "GET_STATUS";
break;
case DM_EVENT_CMD_GET_PARAMETERS:
command = "GET_PARAMETERS";
break;
default:
command = "unknown";
break;
case DM_EVENT_CMD_ACTIVE: return "ACTIVE";
case DM_EVENT_CMD_REGISTER_FOR_EVENT: return "REGISTER_FOR_EVENT";
case DM_EVENT_CMD_UNREGISTER_FOR_EVENT: return "UNREGISTER_FOR_EVENT";
case DM_EVENT_CMD_GET_REGISTERED_DEVICE: return "GET_REGISTERED_DEVICE";
case DM_EVENT_CMD_GET_NEXT_REGISTERED_DEVICE: return "GET_NEXT_REGISTERED_DEVICE";
case DM_EVENT_CMD_SET_TIMEOUT: return "SET_TIMEOUT";
case DM_EVENT_CMD_GET_TIMEOUT: return "GET_TIMEOUT";
case DM_EVENT_CMD_HELLO: return "HELLO";
case DM_EVENT_CMD_DIE: return "DIE";
case DM_EVENT_CMD_GET_STATUS: return "GET_STATUS";
case DM_EVENT_CMD_GET_PARAMETERS: return "GET_PARAMETERS";
default: return "unknown";
}
snprintf(buf, sizeof(buf), "%s (0x%x)", command, cmd);
return buf;
}
#else
@@ -710,6 +674,7 @@ static int _event_wait(struct thread_status *thread, struct dm_task **task)
int ret = DM_WAIT_RETRY;
struct dm_task *dmt;
struct dm_info info;
int ioctl_errno;
*task = 0;
@@ -739,25 +704,27 @@ static int _event_wait(struct thread_status *thread, struct dm_task **task)
* either for a timeout event, or to cancel the thread.
*/
set = _unblock_sigalrm();
errno = 0;
if (dm_task_run(dmt)) {
thread->current_events |= DM_EVENT_DEVICE_ERROR;
ret = DM_WAIT_INTR;
if ((ret = dm_task_get_info(dmt, &info)))
thread->event_nr = info.event_nr;
} else if (thread->events & DM_EVENT_TIMEOUT && errno == EINTR) {
thread->current_events |= DM_EVENT_TIMEOUT;
ret = DM_WAIT_INTR;
} else if (thread->status == DM_THREAD_SHUTDOWN && errno == EINTR) {
ret = DM_WAIT_FATAL;
} else {
syslog(LOG_NOTICE, "dm_task_run failed, errno = %d, %s",
errno, strerror(errno));
if (errno == ENXIO) {
syslog(LOG_ERR, "%s disappeared, detaching",
thread->device.name);
ioctl_errno = dm_task_get_errno(dmt);
if (thread->events & DM_EVENT_TIMEOUT && ioctl_errno == EINTR) {
thread->current_events |= DM_EVENT_TIMEOUT;
ret = DM_WAIT_INTR;
} else if (thread->status == DM_THREAD_SHUTDOWN && ioctl_errno == EINTR)
ret = DM_WAIT_FATAL;
else {
syslog(LOG_NOTICE, "dm_task_run failed, errno = %d, %s",
ioctl_errno, strerror(ioctl_errno));
if (ioctl_errno == ENXIO) {
syslog(LOG_ERR, "%s disappeared, detaching",
thread->device.name);
ret = DM_WAIT_FATAL;
}
}
}
DEBUGLOG("Completed waitevent task for %s", thread->device.uuid);
@@ -1595,9 +1562,6 @@ static void _process_request(struct dm_event_fifos *fifos)
{
int die;
struct dm_event_daemon_message msg = { 0 };
#ifdef DEBUG
const char *cmd;
#endif
/*
* Read the request from the client (client_read, client_write
@@ -1606,7 +1570,8 @@ static void _process_request(struct dm_event_fifos *fifos)
if (!_client_read(fifos, &msg))
return;
DEBUGLOG("%s processing...", cmd = decode_cmd(msg.cmd));
DEBUGLOG("%s (0x%x) processing...", decode_cmd(msg.cmd), msg.cmd);
die = (msg.cmd == DM_EVENT_CMD_DIE) ? 1 : 0;
/* _do_process_request fills in msg (if memory allows for
@@ -1618,7 +1583,7 @@ static void _process_request(struct dm_event_fifos *fifos)
dm_free(msg.data);
DEBUGLOG("%s completed.", cmd);
DEBUGLOG("%s (0x%x) completed.", decode_cmd(msg.cmd), msg.cmd);
if (die) {
if (unlink(DMEVENTD_PIDFILE))
@@ -1668,10 +1633,8 @@ static void _cleanup_unused_threads(void)
if (ret == ESRCH) {
thread->status = DM_THREAD_DONE;
} else if (ret) {
syslog(LOG_ERR,
"Unable to terminate thread: %s\n",
strerror(-ret));
stack;
syslog(LOG_ERR, "Unable to terminate thread: %s",
strerror(ret));
}
break;
}
@@ -1703,8 +1666,7 @@ static void _cleanup_unused_threads(void)
static void _sig_alarm(int signum __attribute__((unused)))
{
DEBUGLOG("Received SIGALRM.");
pthread_testcancel();
/* empty SIG_IGN */;
}
/* Init thread signal handling. */

View File

@@ -17,15 +17,10 @@
//#include "libmultilog.h"
#include "dmeventd.h"
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <sys/wait.h>
#include <arpa/inet.h> /* for htonl, ntohl */

View File

@@ -102,7 +102,8 @@ int dmeventd_lvm2_init(void)
goto out;
if (!_lvm_handle) {
lvm2_log_fn(_temporary_log_fn);
if (!getenv("LVM_LOG_FILE_EPOCH"))
lvm2_log_fn(_temporary_log_fn);
if (!(_lvm_handle = lvm2_init())) {
dm_pool_destroy(_mem_pool);
_mem_pool = NULL;

View File

@@ -18,7 +18,7 @@ top_builddir = @top_builddir@
SOURCES = lvmetad-core.c
SOURCES2 = testclient.c
TARGETS = lvmetad lvmetad-testclient
TARGETS = lvmetad lvmetactl
.PHONY: install_lvmetad
@@ -39,8 +39,11 @@ CFLAGS += $(EXTRA_EXEC_CFLAGS)
lvmetad: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
$(top_builddir)/libdaemon/server/libdaemonserver.a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) \
$(DL_LIBS) $(LVMLIBS) $(LIBS) -rdynamic
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
lvmetactl: lvmetactl.o $(top_builddir)/libdaemon/client/libdaemonclient.a \
$(top_builddir)/libdaemon/server/libdaemonserver.a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmetactl.o $(LVMLIBS)
# TODO: No idea. No idea how to test either.
#ifneq ("$(CFLOW_CMD)", "")

183
daemons/lvmetad/lvmetactl.c Normal file
View File

@@ -0,0 +1,183 @@
/*
* Copyright (C) 2014 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#include "tool.h"
#include "lvmetad-client.h"
daemon_handle h;
static void print_reply(daemon_reply reply)
{
const char *a = daemon_reply_str(reply, "response", NULL);
const char *b = daemon_reply_str(reply, "status", NULL);
const char *c = daemon_reply_str(reply, "reason", NULL);
printf("response \"%s\" status \"%s\" reason \"%s\"\n",
a ? a : "", b ? b : "", c ? c : "");
}
int main(int argc, char **argv)
{
daemon_reply reply;
char *cmd;
char *uuid;
char *name;
int val;
int ver;
if (argc < 2) {
printf("lvmeta dump\n");
printf("lvmeta pv_list\n");
printf("lvmeta vg_list\n");
printf("lvmeta vg_lookup_name <name>\n");
printf("lvmeta vg_lookup_uuid <uuid>\n");
printf("lvmeta pv_lookup_uuid <uuid>\n");
printf("lvmeta set_global_invalid 0|1\n");
printf("lvmeta get_global_invalid\n");
printf("lvmeta set_vg_version <uuid> <version>\n");
printf("lvmeta vg_lock_type <uuid>\n");
return -1;
}
cmd = argv[1];
h = lvmetad_open(NULL);
if (!strcmp(cmd, "dump")) {
reply = daemon_send_simple(h, "dump",
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "pv_list")) {
reply = daemon_send_simple(h, "pv_list",
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "vg_list")) {
reply = daemon_send_simple(h, "vg_list",
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "set_global_invalid")) {
if (argc < 3) {
printf("set_global_invalid 0|1\n");
return -1;
}
val = atoi(argv[2]);
reply = daemon_send_simple(h, "set_global_info",
"global_invalid = %d", val,
"token = %s", "skip",
NULL);
print_reply(reply);
} else if (!strcmp(cmd, "get_global_invalid")) {
reply = daemon_send_simple(h, "get_global_info",
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "set_vg_version")) {
if (argc < 4) {
printf("set_vg_version <uuid> <ver>\n");
return -1;
}
uuid = argv[2];
ver = atoi(argv[3]);
reply = daemon_send_simple(h, "set_vg_info",
"uuid = %s", uuid,
"version = %d", ver,
"token = %s", "skip",
NULL);
print_reply(reply);
} else if (!strcmp(cmd, "vg_lookup_name")) {
if (argc < 3) {
printf("vg_lookup_name <name>\n");
return -1;
}
name = argv[2];
reply = daemon_send_simple(h, "vg_lookup",
"name = %s", name,
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "vg_lookup_uuid")) {
if (argc < 3) {
printf("vg_lookup_uuid <uuid>\n");
return -1;
}
uuid = argv[2];
reply = daemon_send_simple(h, "vg_lookup",
"uuid = %s", uuid,
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else if (!strcmp(cmd, "vg_lock_type")) {
struct dm_config_node *metadata;
const char *lock_type;
if (argc < 3) {
printf("vg_lock_type <uuid>\n");
return -1;
}
uuid = argv[2];
reply = daemon_send_simple(h, "vg_lookup",
"uuid = %s", uuid,
"token = %s", "skip",
NULL);
/* printf("%s\n", reply.buffer.mem); */
metadata = dm_config_find_node(reply.cft->root, "metadata");
if (!metadata) {
printf("no metadata\n");
goto out;
}
lock_type = dm_config_find_str(metadata, "metadata/lock_type", NULL);
if (!lock_type) {
printf("no lock_type\n");
goto out;
}
printf("lock_type %s\n", lock_type);
} else if (!strcmp(cmd, "pv_lookup_uuid")) {
if (argc < 3) {
printf("pv_lookup_uuid <uuid>\n");
return -1;
}
uuid = argv[2];
reply = daemon_send_simple(h, "pv_lookup",
"uuid = %s", uuid,
"token = %s", "skip",
NULL);
printf("%s\n", reply.buffer.mem);
} else {
printf("unknown command\n");
goto out_close;
}
out:
daemon_reply_destroy(reply);
out_close:
daemon_close(h);
return 0;
}

View File

@@ -14,23 +14,114 @@
#define _XOPEN_SOURCE 500 /* pthread */
#include "configure.h"
#define _REENTRANT
#include "tool.h"
#include "daemon-io.h"
#include "config-util.h"
#include "daemon-server.h"
#include "daemon-log.h"
#include "lvm-version.h"
#include <assert.h>
#include <pthread.h>
#include <stdint.h>
#include <unistd.h>
#include <math.h> /* fabs() */
#include <float.h> /* DBL_EPSILON */
#define LVMETAD_SOCKET DEFAULT_RUN_DIR "/lvmetad.socket"
/*
* valid/invalid state of cached metadata
*
* Normally when using lvmetad, the state is kept up-to-date through a
* combination of notifications from clients and updates triggered by uevents.
* When using lvmlockd, the lvmetad state is expected to become out of
* date (invalid/stale) when other hosts make changes to the metadata on disk.
*
* To deal with this, the metadata cached in lvmetad can be flagged as invalid.
* This invalid flag is returned along with the metadata when read by a
* command. The command can check for the invalid flag and decide that it
* should either use the stale metadata (uncommon), or read the latest metadata
* from disk rather than using the invalid metadata that was returned. If the
* command reads the latest metadata from disk, it can choose to send it to
* lvmetad to update the cached copy and clear the invalid flag in lvmetad.
* Otherwise, the next command to read the metadata from lvmetad will also
* receive the invalid metadata with the invalid flag (and like the previous
* command, it too may choose to read the latest metadata from disk and can
* then also choose to update the lvmetad copy.)
*
* For purposes of tracking the invalid state, LVM metadata is considered
* to be either VG-specific or global. VG-specific metadata is metadata
* that is isolated to a VG, such as the LVs it contains. Global
* metadata is metadata that is not isolated to a single VG. Global
* metdata includes:
* . the VG namespace (which VG names are used)
* . the set of orphan PVs (which PVs are in VGs and which are not)
* . properties of orphan PVs (the size of an orphan PV)
*
* If the metadata for a single VG becomes invalid, the VGFL_INVALID
* flag can be set in the vg_info struct for that VG. If the global
* metdata becomes invalid, the GLFL_INVALID flag can be set in the
* lvmetad daemon state.
*
* If a command reads VG metadata and VGFL_INVALID is set, an
* extra config node called "vg_invalid" is added to the config
* data returned to the command.
*
* If a command reads global metdata and GLFL_INVALID is set, an
* extra config node called "global_invalid" is added to the
* config data returned to the command.
*
* If a command sees vg_invalid, and wants the latest VG metadata,
* it only needs to scan disks of the PVs in that VG.
* It can then use vg_update to send the latest metadata to lvmetad
* which clears the VGFL_INVALID flag.
*
* If a command sees global_invalid, and wants the latest metadata,
* it should scan all devices to update lvmetad, and then send
* lvmetad the "set_global_info global_invalid=0" message to clear
* GLFL_INVALID.
*
* (When rescanning devices to update lvmetad, the command must use
* the global filter cmd->lvmetad_filter so that it processes the same
* devices that are seen by lvmetad.)
*
* The lvmetad INVALID flags can be set by sending lvmetad the messages:
*
* . set_vg_info with the latest VG seqno. If the VG seqno is larger
* than the cached VG seqno, VGFL_INVALID is set for the VG.
*
* . set_global_info with global_invalid=1 sets GLFL_INVALID.
*
* Different entities could use these functions to invalidate metadata
* if/when they detected that the cache is stale. How they detect that
* the cache is stale depends on the details of the specific entity.
*
* In the case of lvmlockd, it embeds values into its locks to keep track
* of when other nodes have changed metadata on disk related to those locks.
* When acquring locks it can look at these values and detect that
* the metadata associated with the lock has been changed.
* When the values change, it uses set_vg_info/set_global_info to
* invalidate the lvmetad cache.
*
* The values that lvmlockd distributes through its locks are the
* latest VG seqno in VG locks and a global counter in the global lock.
* When a host acquires a VG lock and sees that the embedded seqno is
* larger than it was previously, it knows that it should invalidate the
* lvmetad cache for the VG. If the host acquires the global lock
* and sees that the counter is larger than previously, it knows that
* it should invalidate the global info in lvmetad. This invalidation
* is done before the lock is returned to the command. This way the
* invalid flag will be set on the metadata before the command reads
* it from lvmetad.
*/
struct vg_info {
int64_t external_version;
uint32_t flags; /* VGFL_ */
};
#define GLFL_INVALID 0x00000001
#define VGFL_INVALID 0x00000001
typedef struct {
log_state *log; /* convenience */
const char *log_config;
@@ -40,6 +131,8 @@ typedef struct {
struct dm_hash_table *vgid_to_metadata;
struct dm_hash_table *vgid_to_vgname;
struct dm_hash_table *vgid_to_outdated_pvs;
struct dm_hash_table *vgid_to_info;
struct dm_hash_table *vgname_to_vgid;
struct dm_hash_table *pvid_to_vgid;
struct {
@@ -50,6 +143,7 @@ typedef struct {
pthread_mutex_t pvid_to_vgid;
} lock;
char token[128];
uint32_t flags; /* GLFL_ */
pthread_mutex_t token_lock;
} lvmetad_state;
@@ -60,17 +154,19 @@ static void destroy_metadata_hashes(lvmetad_state *s)
dm_hash_iterate(n, s->vgid_to_metadata)
dm_config_destroy(dm_hash_get_data(s->vgid_to_metadata, n));
dm_hash_iterate(n, s->vgid_to_outdated_pvs)
dm_config_destroy(dm_hash_get_data(s->vgid_to_outdated_pvs, n));
dm_hash_iterate(n, s->pvid_to_pvmeta)
dm_config_destroy(dm_hash_get_data(s->pvid_to_pvmeta, n));
dm_hash_destroy(s->pvid_to_pvmeta);
dm_hash_destroy(s->vgid_to_metadata);
dm_hash_destroy(s->vgid_to_vgname);
dm_hash_destroy(s->vgid_to_outdated_pvs);
dm_hash_destroy(s->vgid_to_info);
dm_hash_destroy(s->vgname_to_vgid);
dm_hash_iterate(n, s->device_to_pvid)
dm_free(dm_hash_get_data(s->device_to_pvid, n));
dm_hash_destroy(s->device_to_pvid);
dm_hash_destroy(s->pvid_to_vgid);
}
@@ -81,6 +177,8 @@ static void create_metadata_hashes(lvmetad_state *s)
s->device_to_pvid = dm_hash_create(32);
s->vgid_to_metadata = dm_hash_create(32);
s->vgid_to_vgname = dm_hash_create(32);
s->vgid_to_outdated_pvs = dm_hash_create(32);
s->vgid_to_info = dm_hash_create(32);
s->pvid_to_vgid = dm_hash_create(32);
s->vgname_to_vgid = dm_hash_create(32);
}
@@ -244,6 +342,30 @@ static int update_pv_status(lvmetad_state *s,
return complete;
}
static struct dm_config_node *add_last_node(struct dm_config_tree *cft, const char *node_name)
{
struct dm_config_node *cn, *last;
cn = cft->root;
last = cn;
while (cn->sib) {
last = cn->sib;
cn = last;
}
cn = dm_config_create_node(cft, node_name);
if (!cn)
return NULL;
cn->v = NULL;
cn->sib = NULL;
cn->parent = cft->root;
last->sib = cn;
return cn;
}
static struct dm_config_node *make_pv_node(lvmetad_state *s, const char *pvid,
struct dm_config_tree *cft,
struct dm_config_node *parent,
@@ -307,6 +429,9 @@ static response pv_list(lvmetad_state *s, request r)
cn = make_pv_node(s, id, res.cft, cn_pvs, cn);
}
if (s->flags & GLFL_INVALID)
add_last_node(res.cft, "global_invalid");
unlock_pvid_to_pvmeta(s);
return res;
@@ -351,6 +476,9 @@ static response pv_lookup(lvmetad_state *s, request r)
pv->key = "physical_volume";
unlock_pvid_to_pvmeta(s);
if (s->flags & GLFL_INVALID)
add_last_node(res.cft, "global_invalid");
return res;
}
@@ -419,14 +547,87 @@ static response vg_list(lvmetad_state *s, request r)
}
unlock_vgid_to_metadata(s);
if (s->flags & GLFL_INVALID)
add_last_node(res.cft, "global_invalid");
bad:
return res;
}
static void mark_outdated_pv(lvmetad_state *s, const char *vgid, const char *pvid)
{
struct dm_config_tree *pvmeta, *outdated_pvs;
struct dm_config_node *list, *cft_vgid;
struct dm_config_value *v;
lock_pvid_to_pvmeta(s);
pvmeta = dm_hash_lookup(s->pvid_to_pvmeta, pvid);
unlock_pvid_to_pvmeta(s);
/* if the MDA exists and is used, it will have ignore=0 set */
if (!pvmeta ||
(dm_config_find_int64(pvmeta->root, "pvmeta/mda0/ignore", 1) &&
dm_config_find_int64(pvmeta->root, "pvmeta/mda1/ignore", 1)))
return;
WARN(s, "PV %s has outdated metadata", pvid);
outdated_pvs = dm_hash_lookup(s->vgid_to_outdated_pvs, vgid);
if (!outdated_pvs) {
if (!(outdated_pvs = dm_config_from_string("outdated_pvs/pv_list = []")) ||
!(cft_vgid = make_text_node(outdated_pvs, "vgid", dm_pool_strdup(outdated_pvs->mem, vgid),
outdated_pvs->root, NULL)))
abort();
if(!dm_hash_insert(s->vgid_to_outdated_pvs, cft_vgid->v->v.str, outdated_pvs))
abort();
DEBUGLOG(s, "created outdated_pvs list for VG %s", vgid);
}
list = dm_config_find_node(outdated_pvs->root, "outdated_pvs/pv_list");
v = list->v;
while (v) {
if (v->type != DM_CFG_EMPTY_ARRAY && !strcmp(v->v.str, pvid))
return;
v = v->next;
}
if (!(v = dm_config_create_value(outdated_pvs)))
abort();
v->type = DM_CFG_STRING;
v->v.str = dm_pool_strdup(outdated_pvs->mem, pvid);
v->next = list->v;
list->v = v;
}
static void chain_outdated_pvs(lvmetad_state *s, const char *vgid, struct dm_config_tree *metadata_cft, struct dm_config_node *metadata)
{
struct dm_config_tree *cft = dm_hash_lookup(s->vgid_to_outdated_pvs, vgid), *pvmeta;
struct dm_config_node *pv, *res, *out_pvs = cft ? dm_config_find_node(cft->root, "outdated_pvs/pv_list") : NULL;
struct dm_config_value *pvs_v = out_pvs ? out_pvs->v : NULL;
if (!pvs_v)
return;
if (!(res = make_config_node(metadata_cft, "outdated_pvs", metadata_cft->root, 0)))
return; /* oops */
res->sib = metadata->child;
metadata->child = res;
for (; pvs_v && pvs_v->type != DM_CFG_EMPTY_ARRAY; pvs_v = pvs_v->next) {
pvmeta = dm_hash_lookup(s->pvid_to_pvmeta, pvs_v->v.str);
if (!pvmeta) {
WARN(s, "metadata for PV %s not found", pvs_v->v.str);
continue;
}
if (!(pv = dm_config_clone_node(metadata_cft, pvmeta->root, 0)))
continue;
pv->key = dm_config_find_str(pv, "pvmeta/id", NULL);
pv->sib = res->child;
res->child = pv;
}
}
static response vg_lookup(lvmetad_state *s, request r)
{
struct dm_config_tree *cft;
struct dm_config_node *metadata, *n;
struct vg_info *info;
response res = { 0 };
const char *uuid = daemon_request_str(r, "uuid", NULL);
@@ -489,6 +690,17 @@ static response vg_lookup(lvmetad_state *s, request r)
unlock_vg(s, uuid);
update_pv_status(s, res.cft, n, 1); /* FIXME report errors */
chain_outdated_pvs(s, uuid, res.cft, n);
if (s->flags & GLFL_INVALID)
add_last_node(res.cft, "global_invalid");
info = dm_hash_lookup(s->vgid_to_info, uuid);
if (info && (info->flags & VGFL_INVALID)) {
n = add_last_node(res.cft, "vg_invalid");
if (!n)
goto bad;
}
return res;
bad:
@@ -496,65 +708,13 @@ bad:
return reply_fail("out of memory");
}
/* Test if the doubles are close enough to be considered equal */
static int close_enough(double d1, double d2)
{
return fabs(d1 - d2) < DBL_EPSILON;
}
static int compare_value(struct dm_config_value *a, struct dm_config_value *b)
{
int r = 0;
if (a->type > b->type)
return 1;
if (a->type < b->type)
return -1;
switch (a->type) {
case DM_CFG_STRING: r = strcmp(a->v.str, b->v.str); break;
case DM_CFG_FLOAT: r = close_enough(a->v.f, b->v.f) ? 0 : (a->v.f > b->v.f) ? 1 : -1; break;
case DM_CFG_INT: r = (a->v.i == b->v.i) ? 0 : (a->v.i > b->v.i) ? 1 : -1; break;
case DM_CFG_EMPTY_ARRAY: return 0;
}
if (r == 0 && a->next && b->next)
r = compare_value(a->next, b->next);
return r;
}
static int compare_config(struct dm_config_node *a, struct dm_config_node *b)
{
int result = 0;
if (a->v && b->v)
result = compare_value(a->v, b->v);
if (a->v && !b->v)
result = 1;
if (!a->v && b->v)
result = -1;
if (a->child && b->child)
result = compare_config(a->child, b->child);
if (result) {
// DEBUGLOG("config inequality at %s / %s", a->key, b->key);
return result;
}
if (a->sib && b->sib)
result = compare_config(a->sib, b->sib);
if (a->sib && !b->sib)
result = 1;
if (!a->sib && b->sib)
result = -1;
return result;
}
static int vg_remove_if_missing(lvmetad_state *s, const char *vgid, int update_pvids);
enum update_pvid_mode { UPDATE_ONLY, REMOVE_EMPTY, MARK_OUTDATED };
/* You need to be holding the pvid_to_vgid lock already to call this. */
static int update_pvid_to_vgid(lvmetad_state *s, struct dm_config_tree *vg,
const char *vgid, int nuke_empty)
const char *vgid, int mode)
{
struct dm_config_node *pv;
struct dm_hash_table *to_check;
@@ -574,11 +734,14 @@ static int update_pvid_to_vgid(lvmetad_state *s, struct dm_config_tree *vg,
if (!(pvid = dm_config_find_str(pv->child, "id", NULL)))
continue;
if (nuke_empty &&
if (mode == REMOVE_EMPTY &&
(vgid_old = dm_hash_lookup(s->pvid_to_vgid, pvid)) &&
!dm_hash_insert(to_check, vgid_old, (void*) 1))
goto out;
if (mode == MARK_OUTDATED)
mark_outdated_pv(s, vgid, pvid);
if (!dm_hash_insert(s->pvid_to_vgid, pvid, (void*) vgid))
goto out;
@@ -602,10 +765,11 @@ static int update_pvid_to_vgid(lvmetad_state *s, struct dm_config_tree *vg,
/* A pvid map lock needs to be held if update_pvids = 1. */
static int remove_metadata(lvmetad_state *s, const char *vgid, int update_pvids)
{
struct dm_config_tree *old;
struct dm_config_tree *old, *outdated_pvs;
const char *oldname;
lock_vgid_to_metadata(s);
old = dm_hash_lookup(s->vgid_to_metadata, vgid);
outdated_pvs = dm_hash_lookup(s->vgid_to_outdated_pvs, vgid);
oldname = dm_hash_lookup(s->vgid_to_vgname, vgid);
if (!old) {
@@ -619,12 +783,15 @@ static int remove_metadata(lvmetad_state *s, const char *vgid, int update_pvids)
dm_hash_remove(s->vgid_to_metadata, vgid);
dm_hash_remove(s->vgid_to_vgname, vgid);
dm_hash_remove(s->vgname_to_vgid, oldname);
dm_hash_remove(s->vgid_to_outdated_pvs, vgid);
unlock_vgid_to_metadata(s);
if (update_pvids)
/* FIXME: What should happen when update fails */
update_pvid_to_vgid(s, old, "#orphan", 0);
dm_config_destroy(old);
if (outdated_pvs)
dm_config_destroy(outdated_pvs);
return 1;
}
@@ -668,7 +835,7 @@ static int vg_remove_if_missing(lvmetad_state *s, const char *vgid, int update_p
* this function, so they can be safely destroyed after update_metadata returns
* (anything that might have been retained is copied). */
static int update_metadata(lvmetad_state *s, const char *name, const char *_vgid,
struct dm_config_node *metadata, int64_t *oldseq)
struct dm_config_node *metadata, int64_t *oldseq, const char *pvid)
{
struct dm_config_tree *cft = NULL;
struct dm_config_tree *old;
@@ -717,6 +884,10 @@ static int update_metadata(lvmetad_state *s, const char *name, const char *_vgid
if (seq < haveseq) {
DEBUGLOG(s, "Refusing to update metadata for %s (at %d) to %d", _vgid, haveseq, seq);
if (pvid)
mark_outdated_pv(s, dm_config_find_str(old->root, "metadata/id", NULL), pvid);
/* TODO: notify the client that their metadata is out of date? */
retval = 1;
goto out;
@@ -739,6 +910,8 @@ static int update_metadata(lvmetad_state *s, const char *name, const char *_vgid
if (haveseq >= 0 && haveseq < seq) {
INFO(s, "Updating metadata for %s at %d to %d", _vgid, haveseq, seq);
if (oldseq)
update_pvid_to_vgid(s, old, vgid, MARK_OUTDATED);
/* temporarily orphan all of our PVs */
update_pvid_to_vgid(s, old, "#orphan", 0);
}
@@ -773,12 +946,46 @@ out: /* FIXME: We should probably abort() on partial failures. */
return retval;
}
static dev_t device_remove(lvmetad_state *s, struct dm_config_tree *pvmeta, dev_t device)
{
struct dm_config_node *pvmeta_tmp;
struct dm_config_value *v = NULL;
dev_t alt_device = 0, prim_device = 0;
if ((pvmeta_tmp = dm_config_find_node(pvmeta->root, "pvmeta/devices_alternate")))
v = pvmeta_tmp->v;
prim_device = dm_config_find_int64(pvmeta->root, "pvmeta/device", 0);
/* it is the primary device */
if (device > 0 && device == prim_device && pvmeta_tmp && pvmeta_tmp->v)
{
alt_device = pvmeta_tmp->v->v.i;
pvmeta_tmp->v = pvmeta_tmp->v->next;
pvmeta_tmp = dm_config_find_node(pvmeta->root, "pvmeta/device");
pvmeta_tmp->v->v.i = alt_device;
} else if (device != prim_device)
alt_device = prim_device;
/* it is an alternate device */
if (device > 0 && v && v->v.i == device)
pvmeta_tmp->v = v->next;
else while (device > 0 && pvmeta_tmp && v) {
if (v->next && v->next->v.i == device)
v->next = v->next->next;
v = v->next;
}
return alt_device;
}
static response pv_gone(lvmetad_state *s, request r)
{
const char *pvid = daemon_request_str(r, "uuid", NULL);
int64_t device = daemon_request_int(r, "device", 0);
int64_t alt_device = 0;
struct dm_config_tree *pvmeta;
char *pvid_old, *vgid;
char *vgid;
DEBUGLOG(s, "pv_gone: %s / %" PRIu64, pvid, device);
@@ -792,15 +999,18 @@ static response pv_gone(lvmetad_state *s, request r)
DEBUGLOG(s, "pv_gone (updated): %s / %" PRIu64, pvid, device);
pvmeta = dm_hash_lookup(s->pvid_to_pvmeta, pvid);
pvid_old = dm_hash_lookup_binary(s->device_to_pvid, &device, sizeof(device));
if (!(pvmeta = dm_hash_lookup(s->pvid_to_pvmeta, pvid)))
return reply_unknown("PVID does not exist");
vgid = dm_hash_lookup(s->pvid_to_vgid, pvid);
dm_hash_remove_binary(s->device_to_pvid, &device, sizeof(device));
dm_hash_remove(s->pvid_to_pvmeta, pvid);
unlock_pvid_to_pvmeta(s);
dm_free(pvid_old);
if (!(alt_device = device_remove(s, pvmeta, device)))
dm_hash_remove(s->pvid_to_pvmeta, pvid);
DEBUGLOG(s, "pv_gone alt_device = %" PRIu64, alt_device);
unlock_pvid_to_pvmeta(s);
if (vgid) {
if (!(vgid = dm_strdup(vgid)))
@@ -812,12 +1022,15 @@ static response pv_gone(lvmetad_state *s, request r)
dm_free(vgid);
}
if (!pvmeta)
return reply_unknown("PVID does not exist");
if (!alt_device)
dm_config_destroy(pvmeta);
dm_config_destroy(pvmeta);
return daemon_reply_simple("OK", NULL);
if (alt_device) {
return daemon_reply_simple("OK",
"device = %"PRId64, alt_device,
NULL);
} else
return daemon_reply_simple("OK", NULL );
}
static response pv_clear_all(lvmetad_state *s, request r)
@@ -845,11 +1058,11 @@ static response pv_found(lvmetad_state *s, request r)
const char *vgname = daemon_request_str(r, "vgname", NULL);
const char *vgid = daemon_request_str(r, "metadata/id", NULL);
const char *vgid_old = NULL;
struct dm_config_node *pvmeta = dm_config_find_node(r.cft->root, "pvmeta");
struct dm_config_node *pvmeta = dm_config_find_node(r.cft->root, "pvmeta"), *altdev = NULL;
struct dm_config_value *altdev_v;
uint64_t device, device_old_pvid = 0;
struct dm_config_tree *cft, *pvmeta_old_dev = NULL, *pvmeta_old_pvid = NULL;
char *old;
char *pvid_dup;
int complete = 0, orphan = 0;
int64_t seqno = -1, seqno_old = -1, changed = 0;
@@ -861,12 +1074,8 @@ static response pv_found(lvmetad_state *s, request r)
if (!dm_config_get_uint64(pvmeta, "pvmeta/device", &device))
return reply_fail("need PV device number");
if (!(cft = dm_config_create()) ||
(!(pvid_dup = dm_strdup(pvid)))) {
if (cft)
dm_config_destroy(cft);
if (!(cft = dm_config_create()))
return reply_fail("out of memory");
}
lock_pvid_to_pvmeta(s);
@@ -875,7 +1084,6 @@ static response pv_found(lvmetad_state *s, request r)
if ((old = dm_hash_lookup_binary(s->device_to_pvid, &device, sizeof(device)))) {
pvmeta_old_dev = dm_hash_lookup(s->pvid_to_pvmeta, old);
dm_hash_remove(s->pvid_to_pvmeta, old);
vgid_old = dm_hash_lookup(s->pvid_to_vgid, old);
}
@@ -885,35 +1093,69 @@ static response pv_found(lvmetad_state *s, request r)
if (!(cft->root = dm_config_clone_node(cft, pvmeta, 0)))
goto out_of_mem;
pvid = dm_config_find_str(cft->root, "pvmeta/id", NULL);
if (!pvmeta_old_pvid || compare_config(pvmeta_old_pvid->root, cft->root))
changed |= 1;
if (pvmeta_old_pvid && device != device_old_pvid) {
DEBUGLOG(s, "pv %s no longer on device %" PRIu64, pvid, device_old_pvid);
dm_free(dm_hash_lookup_binary(s->device_to_pvid, &device_old_pvid, sizeof(device_old_pvid)));
DEBUGLOG(s, "PV %s duplicated on device %" PRIu64, pvid, device_old_pvid);
dm_hash_remove_binary(s->device_to_pvid, &device_old_pvid, sizeof(device_old_pvid));
if (!dm_hash_insert_binary(s->device_to_pvid, &device_old_pvid,
sizeof(device_old_pvid), (void*)pvid))
goto out_of_mem;
if ((altdev = dm_config_find_node(pvmeta_old_pvid->root, "pvmeta/devices_alternate"))) {
altdev = dm_config_clone_node(cft, altdev, 0);
chain_node(altdev, cft->root, 0);
} else
if (!(altdev = make_config_node(cft, "devices_alternate", cft->root, 0)))
goto out_of_mem;
altdev_v = altdev->v;
while (1) {
if (altdev_v && altdev_v->v.i == device_old_pvid)
break;
if (altdev_v)
altdev_v = altdev_v->next;
if (!altdev_v) {
if (!(altdev_v = dm_config_create_value(cft)))
goto out_of_mem;
altdev_v->next = altdev->v;
altdev->v = altdev_v;
altdev->v->v.i = device_old_pvid;
break;
}
};
altdev_v = altdev->v;
while (altdev_v) {
if (altdev_v->next && altdev_v->next->v.i == device)
altdev_v->next = altdev_v->next->next;
altdev_v = altdev_v->next;
}
changed |= 1;
}
if (!dm_hash_insert(s->pvid_to_pvmeta, pvid, cft) ||
!dm_hash_insert_binary(s->device_to_pvid, &device, sizeof(device), (void*)pvid_dup)) {
!dm_hash_insert_binary(s->device_to_pvid, &device, sizeof(device), (void*)pvid)) {
dm_hash_remove(s->pvid_to_pvmeta, pvid);
out_of_mem:
unlock_pvid_to_pvmeta(s);
dm_config_destroy(cft);
dm_free(pvid_dup);
dm_free(old);
return reply_fail("out of memory");
}
unlock_pvid_to_pvmeta(s);
dm_free(old);
if (pvmeta_old_pvid)
dm_config_destroy(pvmeta_old_pvid);
if (pvmeta_old_dev && pvmeta_old_dev != pvmeta_old_pvid)
dm_config_destroy(pvmeta_old_dev);
if (pvmeta_old_dev && pvmeta_old_dev != pvmeta_old_pvid) {
dev_t d = dm_config_find_int64(pvmeta_old_dev->root, "pvmeta/device", 0);
WARN(s, "pv_found: stray device %"PRId64, d);
if (!device_remove(s, pvmeta_old_dev, device)) {
dm_hash_remove(s->pvid_to_pvmeta, old);
dm_config_destroy(pvmeta_old_dev);
}
}
if (metadata) {
if (!vgid)
@@ -924,7 +1166,7 @@ out_of_mem:
if (daemon_request_int(r, "metadata/seqno", -1) < 0)
return reply_fail("need VG seqno");
if (!update_metadata(s, vgname, vgid, metadata, &seqno_old))
if (!update_metadata(s, vgname, vgid, metadata, &seqno_old, pvid))
return reply_fail("metadata update failed");
changed |= (seqno_old != dm_config_find_int(metadata, "metadata/seqno", -1));
} else {
@@ -972,6 +1214,39 @@ out_of_mem:
NULL);
}
static response vg_clear_outdated_pvs(lvmetad_state *s, request r)
{
struct dm_config_tree *outdated_pvs;
const char *vgid = daemon_request_str(r, "vgid", NULL);
if (!vgid)
return reply_fail("need VG UUID");
if ((outdated_pvs = dm_hash_lookup(s->vgid_to_outdated_pvs, vgid))) {
dm_config_destroy(outdated_pvs);
dm_hash_remove(s->vgid_to_outdated_pvs, vgid);
}
return daemon_reply_simple("OK", NULL);
}
static void vg_info_update(lvmetad_state *s, const char *uuid,
struct dm_config_node *metadata)
{
struct vg_info *info;
int64_t cache_version;
cache_version = dm_config_find_int64(metadata, "metadata/seqno", -1);
if (cache_version == -1)
return;
info = (struct vg_info *) dm_hash_lookup(s->vgid_to_info, uuid);
if (!info)
return;
if (cache_version >= info->external_version)
info->flags &= ~VGFL_INVALID;
}
static response vg_update(lvmetad_state *s, request r)
{
struct dm_config_node *metadata = dm_config_find_node(r.cft->root, "metadata");
@@ -987,8 +1262,10 @@ static response vg_update(lvmetad_state *s, request r)
/* TODO defer metadata update here; add a separate vg_commit
* call; if client does not commit, die */
if (!update_metadata(s, vgname, vgid, metadata, NULL))
if (!update_metadata(s, vgname, vgid, metadata, NULL, NULL))
return reply_fail("metadata update failed");
vg_info_update(s, vgid, metadata);
}
return daemon_reply_simple("OK", NULL);
}
@@ -1009,6 +1286,71 @@ static response vg_remove(lvmetad_state *s, request r)
return daemon_reply_simple("OK", NULL);
}
static response set_global_info(lvmetad_state *s, request r)
{
const int global_invalid = daemon_request_int(r, "global_invalid", -1);
if (global_invalid == 1)
s->flags |= GLFL_INVALID;
else if (global_invalid == 0)
s->flags &= ~GLFL_INVALID;
return daemon_reply_simple("OK", NULL);
}
static response get_global_info(lvmetad_state *s, request r)
{
return daemon_reply_simple("OK", "global_invalid = %d",
(s->flags & GLFL_INVALID) ? 1 : 0,
NULL);
}
static response set_vg_info(lvmetad_state *s, request r)
{
struct dm_config_tree *vg;
struct vg_info *info;
const char *uuid = daemon_request_str(r, "uuid", NULL);
const int64_t new_version = daemon_request_int(r, "version", -1);
int64_t cache_version;
if (!uuid)
goto out;
if (new_version == -1)
goto out;
vg = dm_hash_lookup(s->vgid_to_metadata, uuid);
if (!vg)
goto out;
if (!new_version)
goto inval;
cache_version = dm_config_find_int64(vg->root, "metadata/seqno", -1);
if (cache_version != -1 && new_version != -1 && cache_version >= new_version)
goto out;
inval:
info = dm_hash_lookup(s->vgid_to_info, uuid);
if (!info) {
info = malloc(sizeof(struct vg_info));
if (!info)
goto bad;
memset(info, 0, sizeof(struct vg_info));
if (!dm_hash_insert(s->vgid_to_info, uuid, (void*)info))
goto bad;
}
info->external_version = new_version;
info->flags |= VGFL_INVALID;
out:
return daemon_reply_simple("OK", NULL);
bad:
return reply_fail("out of memory");
}
static void _dump_cft(struct buffer *buf, struct dm_hash_table *ht, const char *key_addr)
{
struct dm_hash_node *n;
@@ -1046,6 +1388,52 @@ static void _dump_pairs(struct buffer *buf, struct dm_hash_table *ht, const char
buffer_append(buf, "}\n");
}
static void _dump_info_version(struct buffer *buf, struct dm_hash_table *ht, const char *name, int int_key)
{
char *append;
struct dm_hash_node *n = dm_hash_get_first(ht);
struct vg_info *info;
buffer_append(buf, name);
buffer_append(buf, " {\n");
while (n) {
const char *key = dm_hash_get_key(ht, n);
info = dm_hash_get_data(ht, n);
buffer_append(buf, " ");
(void) dm_asprintf(&append, "%s = %lld", key, (long long)info->external_version);
if (append)
buffer_append(buf, append);
buffer_append(buf, "\n");
dm_free(append);
n = dm_hash_get_next(ht, n);
}
buffer_append(buf, "}\n");
}
static void _dump_info_flags(struct buffer *buf, struct dm_hash_table *ht, const char *name, int int_key)
{
char *append;
struct dm_hash_node *n = dm_hash_get_first(ht);
struct vg_info *info;
buffer_append(buf, name);
buffer_append(buf, " {\n");
while (n) {
const char *key = dm_hash_get_key(ht, n);
info = dm_hash_get_data(ht, n);
buffer_append(buf, " ");
(void) dm_asprintf(&append, "%s = %llx", key, (long long)info->flags);
if (append)
buffer_append(buf, append);
buffer_append(buf, "\n");
dm_free(append);
n = dm_hash_get_next(ht, n);
}
buffer_append(buf, "}\n");
}
static response dump(lvmetad_state *s)
{
response res = { 0 };
@@ -1068,6 +1456,9 @@ static response dump(lvmetad_state *s)
buffer_append(b, "\n# VGID to VGNAME mapping\n\n");
_dump_pairs(b, s->vgid_to_vgname, "vgid_to_vgname", 0);
buffer_append(b, "\n# VGID to outdated PVs mapping\n\n");
_dump_cft(b, s->vgid_to_outdated_pvs, "outdated_pvs/vgid");
buffer_append(b, "\n# VGNAME to VGID mapping\n\n");
_dump_pairs(b, s->vgname_to_vgid, "vgname_to_vgid", 0);
@@ -1077,6 +1468,12 @@ static response dump(lvmetad_state *s)
buffer_append(b, "\n# DEVICE to PVID mapping\n\n");
_dump_pairs(b, s->device_to_pvid, "device_to_pvid", 1);
buffer_append(b, "\n# VGID to INFO version mapping\n\n");
_dump_info_version(b, s->vgid_to_info, "vgid_to_info", 0);
buffer_append(b, "\n# VGID to INFO flags mapping\n\n");
_dump_info_flags(b, s->vgid_to_info, "vgid_to_info", 0);
unlock_pvid_to_vgid(s);
unlock_pvid_to_pvmeta(s);
unlock_vgid_to_metadata(s);
@@ -1098,7 +1495,7 @@ static response handler(daemon_state s, client_handle h, request r)
return daemon_reply_simple("OK", NULL);
}
if (strcmp(token, state->token) && strcmp(rq, "dump")) {
if (strcmp(token, state->token) && strcmp(rq, "dump") && strcmp(token, "skip")) {
pthread_mutex_unlock(&state->token_lock);
return daemon_reply_simple("token_mismatch",
"expected = %s", state->token,
@@ -1127,6 +1524,9 @@ static response handler(daemon_state s, client_handle h, request r)
if (!strcmp(rq, "vg_update"))
return vg_update(state, r);
if (!strcmp(rq, "vg_clear_outdated_pvs"))
return vg_clear_outdated_pvs(state, r);
if (!strcmp(rq, "vg_remove"))
return vg_remove(state, r);
@@ -1139,6 +1539,15 @@ static response handler(daemon_state s, client_handle h, request r)
if (!strcmp(rq, "vg_list"))
return vg_list(state, r);
if (!strcmp(rq, "set_global_info"))
return set_global_info(state, r);
if (!strcmp(rq, "get_global_info"))
return get_global_info(state, r);
if (!strcmp(rq, "set_vg_info"))
return set_vg_info(state, r);
if (!strcmp(rq, "dump"))
return dump(state);

View File

@@ -1,3 +1,18 @@
/*
* Copyright (C) 2011-2014 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License v.2.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "tool.h"
#include "lvmetad-client.h"
#include "label.h"
#include "lvmcache.h"

View File

@@ -0,0 +1,66 @@
#
# Copyright (C) 2014-2015 Red Hat, Inc.
#
# This file is part of LVM2.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU Lesser General Public License v.2.1.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = @top_builddir@
SOURCES = lvmlockd-core.c
ifeq ("@BUILD_LOCKDSANLOCK@", "yes")
SOURCES += lvmlockd-sanlock.c
endif
ifeq ("@BUILD_LOCKDDLM@", "yes")
SOURCES += lvmlockd-dlm.c
endif
TARGETS = lvmlockd lvmlockctl
.PHONY: install_lvmlockd
include $(top_builddir)/make.tmpl
INCLUDES += -I$(top_srcdir)/libdaemon/server
LVMLIBS = -ldaemonserver $(LVMINTERNAL_LIBS) -ldevmapper
LIBS += $(PTHREAD_LIBS) -lrt
ifeq ("@BUILD_LOCKDSANLOCK@", "yes")
LIBS += -lsanlock_client
endif
ifeq ("@BUILD_LOCKDDLM@", "yes")
LIBS += -ldlm_lt
endif
LDFLAGS += -L$(top_builddir)/libdaemon/server
CLDFLAGS += -L$(top_builddir)/libdaemon/server
lvmlockd: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
$(top_builddir)/libdaemon/server/libdaemonserver.a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
lvmlockctl: lvmlockctl.o $(top_builddir)/libdaemon/client/libdaemonclient.a \
$(top_builddir)/libdaemon/server/libdaemonserver.a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmlockctl.o $(LVMLIBS)
install_lvmlockd: lvmlockd
$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)
install_lvmlockctl: lvmlockctl
$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)
install_lvm2: install_lvmlockd install_lvmlockctl
install: install_lvm2

View File

@@ -0,0 +1,646 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#include "tool.h"
#include "lvmlockd-client.h"
#include <stddef.h>
#include <getopt.h>
#include <signal.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/wait.h>
#include <sys/socket.h>
#include <sys/un.h>
static int quit = 0;
static int info = 0;
static int dump = 0;
static int wait_opt = 0;
static int force_opt = 0;
static int gl_enable = 0;
static int gl_disable = 0;
static int stop_lockspaces = 0;
static char *able_vg_name = NULL;
#define DUMP_SOCKET_NAME "lvmlockd-dump.sock"
#define DUMP_BUF_SIZE (1024 * 1024)
static char dump_buf[DUMP_BUF_SIZE];
static int dump_len;
static struct sockaddr_un dump_addr;
static socklen_t dump_addrlen;
daemon_handle _lvmlockd;
#define log_debug(fmt, args...) \
do { \
printf(fmt "\n", ##args); \
} while (0)
#define log_error(fmt, args...) \
do { \
printf(fmt "\n", ##args); \
} while (0)
#define MAX_LINE 512
/* copied from lvmlockd-internal.h */
#define MAX_NAME 64
#define MAX_ARGS 64
/*
* lvmlockd dumps the client info before the lockspaces,
* so we can look up client info when printing lockspace info.
*/
#define MAX_CLIENTS 100
struct client_info {
uint32_t client_id;
int pid;
char name[MAX_NAME+1];
};
static struct client_info clients[MAX_CLIENTS];
static int num_clients;
static void save_client_info(char *line)
{
uint32_t pid = 0;
int fd = 0;
int pi = 0;
uint32_t client_id = 0;
char name[MAX_NAME+1] = { 0 };
sscanf(line, "info=client pid=%u fd=%d pi=%d id=%u name=%s",
&pid, &fd, &pi, &client_id, name);
clients[num_clients].client_id = client_id;
clients[num_clients].pid = pid;
strcpy(clients[num_clients].name, name);
num_clients++;
}
static void find_client_info(uint32_t client_id, uint32_t *pid, char *cl_name)
{
int i;
for (i = 0; i < num_clients; i++) {
if (clients[i].client_id == client_id) {
*pid = clients[i].pid;
strcpy(cl_name, clients[i].name);
return;
}
}
}
static void format_info_ls(char *line)
{
char ls_name[MAX_NAME+1] = { 0 };
char vg_name[MAX_NAME+1] = { 0 };
char vg_uuid[MAX_NAME+1] = { 0 };
char vg_sysid[MAX_NAME+1] = { 0 };
char lock_args[MAX_ARGS+1] = { 0 };
char lock_type[MAX_NAME+1] = { 0 };
sscanf(line, "info=ls ls_name=%s vg_name=%s vg_uuid=%s vg_sysid=%s vg_args=%s lm_type=%s",
ls_name, vg_name, vg_uuid, vg_sysid, lock_args, lock_type);
printf("\n");
printf("VG %s lock_type=%s %s\n", vg_name, lock_type, vg_uuid);
printf("LS %s %s\n", lock_type, ls_name);
}
static void format_info_ls_action(char *line)
{
uint32_t client_id = 0;
char flags[MAX_NAME+1] = { 0 };
char version[MAX_NAME+1] = { 0 };
char op[MAX_NAME+1] = { 0 };
uint32_t pid = 0;
char cl_name[MAX_NAME+1] = { 0 };
sscanf(line, "info=ls_action client_id=%u %s %s op=%s",
&client_id, flags, version, op);
find_client_info(client_id, &pid, cl_name);
printf("OP %s pid %u (%s)\n", op, pid, cl_name);
}
static void format_info_r(char *line, char *r_name_out, char *r_type_out)
{
char r_name[MAX_NAME+1] = { 0 };
char r_type[4] = { 0 };
char mode[4] = { 0 };
char sh_count[MAX_NAME+1] = { 0 };
uint32_t ver = 0;
sscanf(line, "info=r name=%s type=%s mode=%s %s version=%u",
r_name, r_type, mode, sh_count, &ver);
/* when mode is not un, wait and print each lk line */
if (strcmp(mode, "un")) {
strcpy(r_name_out, r_name);
strcpy(r_type_out, r_type);
return;
}
/* when mode is un, there will be no lk lines, so print now */
if (!strcmp(r_type, "gl")) {
printf("LK GL un ver %4u\n", ver);
} else if (!strcmp(r_type, "vg")) {
printf("LK VG un ver %4u\n", ver);
} else if (!strcmp(r_type, "lv")) {
printf("LK LV un %s\n", r_name);
}
}
static void format_info_lk(char *line, char *r_name, char *r_type)
{
char mode[4] = { 0 };
uint32_t ver = 0;
char flags[MAX_NAME+1] = { 0 };
uint32_t client_id = 0;
uint32_t pid = 0;
char cl_name[MAX_NAME+1] = { 0 };
if (!r_name[0] || !r_type[0]) {
printf("format_info_lk error r_name %s r_type %s\n", r_name, r_type);
printf("%s\n", line);
return;
}
sscanf(line, "info=lk mode=%s version=%u %s client_id=%u",
mode, &ver, flags, &client_id);
find_client_info(client_id, &pid, cl_name);
if (!strcmp(r_type, "gl")) {
printf("LK GL %s ver %4u pid %u (%s)\n", mode, ver, pid, cl_name);
} else if (!strcmp(r_type, "vg")) {
printf("LK VG %s ver %4u pid %u (%s)\n", mode, ver, pid, cl_name);
} else if (!strcmp(r_type, "lv")) {
printf("LK LV %s %s\n", mode, r_name);
}
}
static void format_info_r_action(char *line, char *r_name, char *r_type)
{
uint32_t client_id = 0;
char flags[MAX_NAME+1] = { 0 };
char version[MAX_NAME+1] = { 0 };
char op[MAX_NAME+1] = { 0 };
char rt[4] = { 0 };
char mode[4] = { 0 };
char lm[MAX_NAME+1] = { 0 };
char result[MAX_NAME+1] = { 0 };
char lm_rv[MAX_NAME+1] = { 0 };
uint32_t pid = 0;
char cl_name[MAX_NAME+1] = { 0 };
if (!r_name[0] || !r_type[0]) {
printf("format_info_r_action error r_name %s r_type %s\n", r_name, r_type);
printf("%s\n", line);
return;
}
sscanf(line, "info=r_action client_id=%u %s %s op=%s rt=%s mode=%s %s %s %s",
&client_id, flags, version, op, rt, mode, lm, result, lm_rv);
find_client_info(client_id, &pid, cl_name);
if (strcmp(op, "lock")) {
printf("OP %s pid %u (%s)", op, pid, cl_name);
return;
}
if (!strcmp(r_type, "gl")) {
printf("LW GL %s ver %4u pid %u (%s)\n", mode, 0, pid, cl_name);
} else if (!strcmp(r_type, "vg")) {
printf("LW VG %s ver %4u pid %u (%s)\n", mode, 0, pid, cl_name);
} else if (!strcmp(r_type, "lv")) {
printf("LW LV %s %s\n", mode, r_name);
}
}
static void format_info_line(char *line, char *r_name, char *r_type)
{
if (!strncmp(line, "info=structs ", strlen("info=structs "))) {
printf("%s", line);
} else if (!strncmp(line, "info=client ", strlen("info=client "))) {
save_client_info(line);
} else if (!strncmp(line, "info=ls ", strlen("info=ls "))) {
format_info_ls(line);
} else if (!strncmp(line, "info=ls_action ", strlen("info=ls_action "))) {
format_info_ls_action(line);
} else if (!strncmp(line, "info=r ", strlen("info=r "))) {
/*
* r_name/r_type are reset when a new resource is found.
* They are reused for the lock and action lines that
* follow a resource line.
*/
memset(r_name, 0, MAX_NAME+1);
memset(r_type, 0, MAX_NAME+1);
format_info_r(line, r_name, r_type);
} else if (!strncmp(line, "info=lk ", strlen("info=lk "))) {
/* will use info from previous r */
format_info_lk(line, r_name, r_type);
} else if (!strncmp(line, "info=r_action ", strlen("info=r_action "))) {
/* will use info from previous r */
format_info_r_action(line, r_name, r_type);
} else {
printf("UN %s\n", line);
}
}
static void format_info(void)
{
char line[MAX_LINE];
char r_name[MAX_NAME+1];
char r_type[MAX_NAME+1];
int i, j;
j = 0;
memset(line, 0, sizeof(line));
for (i = 0; i < dump_len; i++) {
line[j++] = dump_buf[i];
if ((line[j-1] == '\n') || (line[j-1] == '\0')) {
format_info_line(line, r_name, r_type);
j = 0;
memset(line, 0, sizeof(line));
}
}
}
static daemon_reply _lvmlockd_send(const char *req_name, ...)
{
va_list ap;
daemon_reply repl;
daemon_request req;
req = daemon_request_make(req_name);
va_start(ap, req_name);
daemon_request_extend_v(req, ap);
va_end(ap);
repl = daemon_send(_lvmlockd, req);
daemon_request_destroy(req);
return repl;
}
/* See the same in lib/locking/lvmlockd.c */
#define NO_LOCKD_RESULT -1000
static int _lvmlockd_result(daemon_reply reply, int *result)
{
int reply_result;
const char *reply_flags;
const char *lock_type;
if (reply.error) {
log_error("lvmlockd_result reply error %d", reply.error);
return 0;
}
if (strcmp(daemon_reply_str(reply, "response", ""), "OK")) {
log_error("lvmlockd_result bad response");
return 0;
}
reply_result = daemon_reply_int(reply, "op_result", NO_LOCKD_RESULT);
if (reply_result == -1000) {
log_error("lvmlockd_result no op_result");
return 0;
}
/* The lock_type that lvmlockd used for locking. */
lock_type = daemon_reply_str(reply, "lock_type", "none");
*result = reply_result;
reply_flags = daemon_reply_str(reply, "result_flags", NULL);
log_debug("lvmlockd_result %d %s lm %s", reply_result, reply_flags, lock_type);
return 1;
}
static int do_quit(void)
{
daemon_reply reply;
int rv = 0;
reply = daemon_send_simple(_lvmlockd, "quit", NULL);
if (reply.error) {
log_error("reply error %d", reply.error);
rv = reply.error;
}
daemon_reply_destroy(reply);
return rv;
}
static int setup_dump_socket(void)
{
int s, rv;
s = socket(AF_LOCAL, SOCK_DGRAM, 0);
if (s < 0)
return s;
memset(&dump_addr, 0, sizeof(dump_addr));
dump_addr.sun_family = AF_LOCAL;
strcpy(&dump_addr.sun_path[1], DUMP_SOCKET_NAME);
dump_addrlen = sizeof(sa_family_t) + strlen(dump_addr.sun_path+1) + 1;
rv = bind(s, (struct sockaddr *) &dump_addr, dump_addrlen);
if (rv < 0) {
if (!close(s))
log_error("failed to close dump socket");
return rv;
}
return s;
}
static int do_dump(const char *req_name)
{
daemon_reply reply;
int result;
int fd, rv = 0;
fd = setup_dump_socket();
if (fd < 0) {
log_error("socket error %d", fd);
return fd;
}
reply = daemon_send_simple(_lvmlockd, req_name, NULL);
if (reply.error) {
log_error("reply error %d", reply.error);
rv = reply.error;
goto out;
}
result = daemon_reply_int(reply, "result", 0);
dump_len = daemon_reply_int(reply, "dump_len", 0);
daemon_reply_destroy(reply);
if (result < 0) {
rv = result;
log_error("result %d", result);
}
if (!dump_len)
goto out;
memset(dump_buf, 0, sizeof(dump_buf));
rv = recvfrom(fd, dump_buf, dump_len, MSG_WAITALL,
(struct sockaddr *)&dump_addr, &dump_addrlen);
if (rv < 0) {
log_error("recvfrom error %d %d", rv, errno);
rv = -errno;
goto out;
}
rv = 0;
if ((info && dump) || !strcmp(req_name, "dump"))
printf("%s\n", dump_buf);
else
format_info();
out:
if (close(fd))
log_error("failed to close dump socket %d", fd);
return rv;
}
static int do_able(const char *req_name)
{
daemon_reply reply;
int result;
int rv;
reply = _lvmlockd_send(req_name,
"cmd = %s", "lvmlock",
"pid = %d", getpid(),
"vg_name = %s", able_vg_name,
NULL);
if (!_lvmlockd_result(reply, &result)) {
log_error("lvmlockd result %d", result);
rv = result;
} else {
rv = 0;
}
daemon_reply_destroy(reply);
return rv;
}
static int do_stop_lockspaces(void)
{
daemon_reply reply;
char opts[32];
int result;
int rv;
memset(opts, 0, sizeof(opts));
if (wait_opt)
strcat(opts, "wait ");
if (force_opt)
strcat(opts, "force ");
reply = _lvmlockd_send("stop_all",
"cmd = %s", "lvmlock",
"pid = %d", getpid(),
"opts = %s", opts[0] ? opts : "none",
NULL);
if (!_lvmlockd_result(reply, &result)) {
log_error("lvmlockd result %d", result);
rv = result;
} else {
rv = 0;
}
daemon_reply_destroy(reply);
return rv;
}
static void print_usage(void)
{
printf("lvmlockctl options\n");
printf("Options:\n");
printf("--help | -h\n");
printf(" Show this help information.\n");
printf("--quit | -q\n");
printf(" Tell lvmlockd to quit.\n");
printf("--info | -i\n");
printf(" Print lock state information from lvmlockd.\n");
printf("--dump | -d\n");
printf(" Print log buffer from lvmlockd.\n");
printf("--wait | -w 0|1\n");
printf(" Wait option for other commands.\n");
printf("--force | -f 0|1>\n");
printf(" Force option for other commands.\n");
printf("--stop-lockspaces | -S\n");
printf(" Stop all lockspaces.\n");
printf("--gl-enable <vg_name>\n");
printf(" Tell lvmlockd to enable the global lock in a sanlock vg.\n");
printf("--gl-disable <vg_name>\n");
printf(" Tell lvmlockd to disable the global lock in a sanlock vg.\n");
}
static int read_options(int argc, char *argv[])
{
int option_index = 0;
int c;
static struct option long_options[] = {
{"help", no_argument, 0, 'h' },
{"quit", no_argument, 0, 'q' },
{"info", no_argument, 0, 'i' },
{"dump", no_argument, 0, 'd' },
{"wait", required_argument, 0, 'w' },
{"force", required_argument, 0, 'f' },
{"gl-enable", required_argument, 0, 'E' },
{"gl-disable", required_argument, 0, 'D' },
{"stop-lockspaces", no_argument, 0, 'S' },
{0, 0, 0, 0 }
};
if (argc == 1) {
print_usage();
exit(0);
}
while (1) {
c = getopt_long(argc, argv, "hqidE:D:w:S", long_options, &option_index);
if (c == -1)
break;
switch (c) {
case 'h':
/* --help */
print_usage();
exit(0);
case 'q':
/* --quit */
quit = 1;
break;
case 'i':
/* --info */
info = 1;
break;
case 'd':
/* --dump */
dump = 1;
break;
case 'w':
wait_opt = atoi(optarg);
break;
case 'E':
gl_enable = 1;
able_vg_name = strdup(optarg);
break;
case 'D':
gl_disable = 1;
able_vg_name = strdup(optarg);
break;
case 'S':
stop_lockspaces = 1;
break;
default:
print_usage();
exit(1);
}
}
return 0;
}
int main(int argc, char **argv)
{
int rv = 0;
rv = read_options(argc, argv);
if (rv < 0)
return rv;
_lvmlockd = lvmlockd_open(NULL);
if (_lvmlockd.socket_fd < 0 || _lvmlockd.error) {
log_error("lvmlockd open error %d", _lvmlockd.error);
return -1;
}
if (quit) {
rv = do_quit();
goto out;
}
if (info) {
rv = do_dump("info");
goto out;
}
if (dump) {
rv = do_dump("dump");
goto out;
}
if (gl_enable) {
rv = do_able("enable_gl");
goto out;
}
if (gl_disable) {
rv = do_able("disable_gl");
goto out;
}
if (stop_lockspaces) {
rv = do_stop_lockspaces();
goto out;
}
out:
lvmlockd_close(_lvmlockd);
return rv;
}

View File

@@ -0,0 +1,49 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#ifndef _LVM_LVMLOCKD_CLIENT_H
#define _LVM_LVMLOCKD_CLIENT_H
#include "daemon-client.h"
#define LVMLOCKD_SOCKET DEFAULT_RUN_DIR "/lvmlockd.socket"
/* Wrappers to open/close connection */
static inline daemon_handle lvmlockd_open(const char *sock)
{
daemon_info lvmlockd_info = {
.path = "lvmlockd",
.socket = sock ?: LVMLOCKD_SOCKET,
.protocol = "lvmlockd",
.protocol_version = 1,
.autostart = 0
};
return daemon_open(lvmlockd_info);
}
static inline void lvmlockd_close(daemon_handle h)
{
return daemon_close(h);
}
/*
* Errors returned as the lvmlockd result value.
*/
#define ENOLS 210 /* lockspace not found */
#define ESTARTING 211 /* lockspace is starting */
#define EARGS 212
#define EHOSTID 213
#define EMANAGER 214
#define EPREPARE 215
#define ELOCKD 216
#endif /* _LVM_LVMLOCKD_CLIENT_H */

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,662 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#define _XOPEN_SOURCE 500 /* pthread */
#define _ISOC99_SOURCE
#include "tool.h"
#include "daemon-server.h"
#include "daemon-log.h"
#include "xlate.h"
#include "lvmlockd-internal.h"
#include "lvmlockd-client.h"
/*
* Using synchronous _wait dlm apis so do not define _REENTRANT and
* link with non-threaded version of library, libdlm_lt.
*/
#include "libdlm.h"
#include <pthread.h>
#include <stddef.h>
#include <poll.h>
#include <errno.h>
#include <endian.h>
#include <fcntl.h>
#include <byteswap.h>
#include <syslog.h>
#include <dirent.h>
#include <sys/socket.h>
struct lm_dlm {
dlm_lshandle_t *dh;
};
struct rd_dlm {
struct dlm_lksb lksb;
struct val_blk *vb;
};
int lm_data_size_dlm(void)
{
return sizeof(struct rd_dlm);
}
/*
* lock_args format
*
* vg_lock_args format for dlm is
* vg_version_string:undefined:cluster_name
*
* lv_lock_args are not used for dlm
*
* version_string is MAJOR.MINOR.PATCH
* undefined may contain ":"
*/
#define VG_LOCK_ARGS_MAJOR 1
#define VG_LOCK_ARGS_MINOR 0
#define VG_LOCK_ARGS_PATCH 0
static int cluster_name_from_args(char *vg_args, char *clustername)
{
return last_string_from_args(vg_args, clustername);
}
static int check_args_version(char *vg_args)
{
unsigned int major = 0;
int rv;
rv = version_from_args(vg_args, &major, NULL, NULL);
if (rv < 0) {
log_error("check_args_version %s error %d", vg_args, rv);
return rv;
}
if (major > VG_LOCK_ARGS_MAJOR) {
log_error("check_args_version %s major %d %d", vg_args, major, VG_LOCK_ARGS_MAJOR);
return -1;
}
return 0;
}
/* This will be set after dlm_controld is started. */
#define DLM_CLUSTER_NAME_PATH "/sys/kernel/config/dlm/cluster/cluster_name"
static int read_cluster_name(char *clustername)
{
static const char close_error_msg[] = "read_cluster_name: close_error %d";
char *n;
int fd;
int rv;
if (daemon_test) {
sprintf(clustername, "%s", "test");
return 0;
}
fd = open(DLM_CLUSTER_NAME_PATH, O_RDONLY);
if (fd < 0) {
log_debug("read_cluster_name: open error %d, check dlm_controld", fd);
return fd;
}
rv = read(fd, clustername, MAX_ARGS);
if (rv < 0) {
log_error("read_cluster_name: cluster name read error %d, check dlm_controld", fd);
if (close(fd))
log_error(close_error_msg, fd);
return rv;
}
n = strstr(clustername, "\n");
if (n)
*n = '\0';
if (close(fd))
log_error(close_error_msg, fd);
return 0;
}
int lm_init_vg_dlm(char *ls_name, char *vg_name, uint32_t flags, char *vg_args)
{
char clustername[MAX_ARGS+1];
char lock_args_version[MAX_ARGS+1];
int rv;
memset(clustername, 0, sizeof(clustername));
memset(lock_args_version, 0, sizeof(lock_args_version));
snprintf(lock_args_version, MAX_ARGS, "%u.%u.%u",
VG_LOCK_ARGS_MAJOR, VG_LOCK_ARGS_MINOR, VG_LOCK_ARGS_PATCH);
rv = read_cluster_name(clustername);
if (rv < 0)
return -EMANAGER;
if (strlen(clustername) + strlen(lock_args_version) + 2 > MAX_ARGS) {
log_error("init_vg_dlm args too long");
return -EARGS;
}
snprintf(vg_args, MAX_ARGS, "%s:%s", lock_args_version, clustername);
rv = 0;
log_debug("init_vg_dlm done %s vg_args %s", ls_name, vg_args);
return rv;
}
int lm_prepare_lockspace_dlm(struct lockspace *ls)
{
char sys_clustername[MAX_ARGS+1];
char arg_clustername[MAX_ARGS+1];
struct lm_dlm *lmd;
int rv;
memset(sys_clustername, 0, sizeof(sys_clustername));
memset(arg_clustername, 0, sizeof(arg_clustername));
rv = read_cluster_name(sys_clustername);
if (rv < 0)
return -EMANAGER;
if (!ls->vg_args[0]) {
/* global lockspace has no vg args */
goto skip_args;
}
rv = check_args_version(ls->vg_args);
if (rv < 0)
return -EARGS;
rv = cluster_name_from_args(ls->vg_args, arg_clustername);
if (rv < 0) {
log_error("prepare_lockspace_dlm %s no cluster name from args %s", ls->name, ls->vg_args);
return -EARGS;
}
if (strcmp(sys_clustername, arg_clustername)) {
log_error("prepare_lockspace_dlm %s mismatching cluster names sys %s arg %s",
ls->name, sys_clustername, arg_clustername);
return -EARGS;
}
skip_args:
lmd = malloc(sizeof(struct lm_dlm));
if (!lmd)
return -ENOMEM;
ls->lm_data = lmd;
return 0;
}
int lm_add_lockspace_dlm(struct lockspace *ls, int adopt)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
if (daemon_test)
return 0;
if (adopt)
lmd->dh = dlm_open_lockspace(ls->name);
else
lmd->dh = dlm_new_lockspace(ls->name, 0600, DLM_LSFL_NEWEXCL);
if (!lmd->dh) {
log_error("add_lockspace_dlm %s adopt %d error", ls->name, adopt);
free(lmd);
ls->lm_data = NULL;
return -1;
}
return 0;
}
int lm_rem_lockspace_dlm(struct lockspace *ls, int free_vg)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
int rv;
if (daemon_test)
goto out;
/*
* If free_vg is set, it means we are doing vgremove, and we may want
* to tell any other nodes to leave the lockspace. This is not really
* necessary since there should be no harm in having an unused
* lockspace sitting around. A new "notification lock" would need to
* be added with a callback to signal this.
*/
rv = dlm_release_lockspace(ls->name, lmd->dh, 1);
if (rv < 0) {
log_error("rem_lockspace_dlm error %d", rv);
return rv;
}
out:
free(lmd);
ls->lm_data = NULL;
if (!strcmp(ls->name, gl_lsname_dlm)) {
gl_running_dlm = 0;
gl_auto_dlm = 0;
}
return 0;
}
static int lm_add_resource_dlm(struct lockspace *ls, struct resource *r, int with_lock_nl)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
uint32_t flags = 0;
char *buf;
int rv;
if (r->type == LD_RT_GL || r->type == LD_RT_VG) {
buf = malloc(sizeof(struct val_blk) + DLM_LVB_LEN);
if (!buf)
return -ENOMEM;
memset(buf, 0, sizeof(struct val_blk) + DLM_LVB_LEN);
rdd->vb = (struct val_blk *)buf;
rdd->lksb.sb_lvbptr = buf + sizeof(struct val_blk);
flags |= LKF_VALBLK;
}
if (!with_lock_nl)
goto out;
/* because this is a new NL lock request */
flags |= LKF_EXPEDITE;
if (daemon_test)
goto out;
rv = dlm_ls_lock_wait(lmd->dh, LKM_NLMODE, &rdd->lksb, flags,
r->name, strlen(r->name),
0, NULL, NULL, NULL);
if (rv < 0) {
log_error("S %s R %s add_resource_dlm lock error %d", ls->name, r->name, rv);
return rv;
}
out:
return 0;
}
int lm_rem_resource_dlm(struct lockspace *ls, struct resource *r)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
struct dlm_lksb *lksb;
int rv = 0;
if (daemon_test)
goto out;
lksb = &rdd->lksb;
if (!lksb->sb_lkid)
goto out;
rv = dlm_ls_unlock_wait(lmd->dh, lksb->sb_lkid, 0, lksb);
if (rv < 0) {
log_error("S %s R %s rem_resource_dlm unlock error %d", ls->name, r->name, rv);
}
out:
if (rdd->vb)
free(rdd->vb);
memset(rdd, 0, sizeof(struct rd_dlm));
r->lm_init = 0;
return rv;
}
static int to_dlm_mode(int ld_mode)
{
switch (ld_mode) {
case LD_LK_EX:
return LKM_EXMODE;
case LD_LK_SH:
return LKM_PRMODE;
};
return -1;
}
static int lm_adopt_dlm(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
struct dlm_lksb *lksb;
uint32_t flags = 0;
int mode;
int rv;
*r_version = 0;
if (!r->lm_init) {
rv = lm_add_resource_dlm(ls, r, 0);
if (rv < 0)
return rv;
r->lm_init = 1;
}
lksb = &rdd->lksb;
flags |= LKF_PERSISTENT;
flags |= LKF_ORPHAN;
if (rdd->vb)
flags |= LKF_VALBLK;
mode = to_dlm_mode(ld_mode);
if (mode < 0) {
log_error("adopt_dlm invalid mode %d", ld_mode);
rv = -EINVAL;
goto fail;
}
log_debug("S %s R %s adopt_dlm", ls->name, r->name);
if (daemon_test)
return 0;
/*
* dlm returns 0 for success, -EAGAIN if an orphan is
* found with another mode, and -ENOENT if no orphan.
*
* cast/bast/param are (void *)1 because the kernel
* returns errors if some are null.
*/
rv = dlm_ls_lockx(lmd->dh, mode, lksb, flags,
r->name, strlen(r->name), 0,
(void *)1, (void *)1, (void *)1,
NULL, NULL);
if (rv == -EAGAIN) {
log_debug("S %s R %s adopt_dlm adopt mode %d try other mode",
ls->name, r->name, ld_mode);
rv = -EUCLEAN;
goto fail;
}
if (rv < 0) {
log_debug("S %s R %s adopt_dlm mode %d flags %x error %d errno %d",
ls->name, r->name, mode, flags, rv, errno);
goto fail;
}
/*
* FIXME: For GL/VG locks we probably want to read the lvb,
* especially if adopting an ex lock, because when we
* release this adopted ex lock we may want to write new
* lvb values based on the current lvb values (at lease
* in the GL case where we increment the current values.)
*
* It should be possible to read the lvb by requesting
* this lock in the same mode it's already in.
*/
return rv;
fail:
lm_rem_resource_dlm(ls, r);
return rv;
}
/*
* Use PERSISTENT so that if lvmlockd exits while holding locks,
* the locks will remain orphaned in the dlm, still protecting what
* they were acquired to protect.
*/
int lm_lock_dlm(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version, int adopt)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
struct dlm_lksb *lksb;
struct val_blk vb;
uint32_t flags = 0;
uint16_t vb_version;
int mode;
int rv;
if (adopt) {
/* When adopting, we don't follow the normal method
of acquiring a NL lock then converting it to the
desired mode. */
return lm_adopt_dlm(ls, r, ld_mode, r_version);
}
if (!r->lm_init) {
rv = lm_add_resource_dlm(ls, r, 1);
if (rv < 0)
return rv;
r->lm_init = 1;
}
lksb = &rdd->lksb;
flags |= LKF_CONVERT;
flags |= LKF_NOQUEUE;
flags |= LKF_PERSISTENT;
if (rdd->vb)
flags |= LKF_VALBLK;
mode = to_dlm_mode(ld_mode);
if (mode < 0) {
log_error("lock_dlm invalid mode %d", ld_mode);
return -EINVAL;
}
log_debug("S %s R %s lock_dlm", ls->name, r->name);
if (daemon_test) {
*r_version = 0;
return 0;
}
rv = dlm_ls_lock_wait(lmd->dh, mode, lksb, flags,
r->name, strlen(r->name),
0, NULL, NULL, NULL);
if (rv == -EAGAIN) {
log_error("S %s R %s lock_dlm mode %d rv EAGAIN", ls->name, r->name, mode);
return -EAGAIN;
}
if (rv < 0) {
log_error("S %s R %s lock_dlm error %d", ls->name, r->name, rv);
return rv;
}
if (rdd->vb) {
if (lksb->sb_flags & DLM_SBF_VALNOTVALID) {
log_debug("S %s R %s lock_dlm VALNOTVALID", ls->name, r->name);
memset(rdd->vb, 0, sizeof(struct val_blk));
*r_version = 0;
goto out;
}
memcpy(&vb, lksb->sb_lvbptr, sizeof(struct val_blk));
vb_version = le16_to_cpu(vb.version);
if (vb_version && ((vb_version & 0xFF00) > (VAL_BLK_VERSION & 0xFF00))) {
log_error("S %s R %s lock_dlm ignore vb_version %x",
ls->name, r->name, vb_version);
*r_version = 0;
free(rdd->vb);
rdd->vb = NULL;
lksb->sb_lvbptr = NULL;
goto out;
}
*r_version = le32_to_cpu(vb.r_version);
memcpy(rdd->vb, &vb, sizeof(vb)); /* rdd->vb saved as le */
log_debug("S %s R %s lock_dlm get r_version %u",
ls->name, r->name, *r_version);
}
out:
return 0;
}
int lm_convert_dlm(struct lockspace *ls, struct resource *r,
int ld_mode, uint32_t r_version)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
struct dlm_lksb *lksb = &rdd->lksb;
uint32_t mode;
uint32_t flags = 0;
int rv;
log_debug("S %s R %s convert_dlm", ls->name, r->name);
flags |= LKF_CONVERT;
flags |= LKF_NOQUEUE;
flags |= LKF_PERSISTENT;
if (rdd->vb && r_version && (r->mode == LD_LK_EX)) {
if (!rdd->vb->version) {
/* first time vb has been written */
rdd->vb->version = cpu_to_le16(VAL_BLK_VERSION);
}
rdd->vb->r_version = cpu_to_le32(r_version);
memcpy(lksb->sb_lvbptr, rdd->vb, sizeof(struct val_blk));
log_debug("S %s R %s convert_dlm set r_version %u",
ls->name, r->name, r_version);
flags |= LKF_VALBLK;
}
mode = to_dlm_mode(ld_mode);
if (daemon_test)
return 0;
rv = dlm_ls_lock_wait(lmd->dh, mode, lksb, flags,
r->name, strlen(r->name),
0, NULL, NULL, NULL);
if (rv == -EAGAIN) {
/* FIXME: When does this happen? Should something different be done? */
log_error("S %s R %s convert_dlm mode %d rv EAGAIN", ls->name, r->name, mode);
return -EAGAIN;
}
if (rv < 0) {
log_error("S %s R %s convert_dlm error %d", ls->name, r->name, rv);
}
return rv;
}
int lm_unlock_dlm(struct lockspace *ls, struct resource *r,
uint32_t r_version, uint32_t lmuf_flags)
{
struct lm_dlm *lmd = (struct lm_dlm *)ls->lm_data;
struct rd_dlm *rdd = (struct rd_dlm *)r->lm_data;
struct dlm_lksb *lksb = &rdd->lksb;
uint32_t flags = 0;
int rv;
log_debug("S %s R %s unlock_dlm r_version %u flags %x",
ls->name, r->name, r_version, lmuf_flags);
/*
* Do not set PERSISTENT, because we don't need an orphan
* NL lock to protect anything.
*/
flags |= LKF_CONVERT;
if (rdd->vb && r_version && (r->mode == LD_LK_EX)) {
if (!rdd->vb->version) {
/* first time vb has been written */
rdd->vb->version = cpu_to_le16(VAL_BLK_VERSION);
}
if (r_version)
rdd->vb->r_version = cpu_to_le32(r_version);
memcpy(lksb->sb_lvbptr, rdd->vb, sizeof(struct val_blk));
log_debug("S %s R %s unlock_dlm set r_version %u",
ls->name, r->name, r_version);
flags |= LKF_VALBLK;
}
if (daemon_test)
return 0;
rv = dlm_ls_lock_wait(lmd->dh, LKM_NLMODE, lksb, flags,
r->name, strlen(r->name),
0, NULL, NULL, NULL);
if (rv < 0) {
log_error("S %s R %s unlock_dlm error %d", ls->name, r->name, rv);
}
return rv;
}
/*
* This list could be read from dlm_controld via libdlmcontrol,
* but it's simpler to get it from sysfs.
*/
#define DLM_LOCKSPACES_PATH "/sys/kernel/config/dlm/cluster/spaces"
int lm_get_lockspaces_dlm(struct list_head *ls_rejoin)
{
struct lockspace *ls;
struct dirent *de;
DIR *ls_dir;
if (!(ls_dir = opendir(DLM_LOCKSPACES_PATH)))
return -ECONNREFUSED;
while ((de = readdir(ls_dir))) {
if (de->d_name[0] == '.')
continue;
if (strncmp(de->d_name, LVM_LS_PREFIX, strlen(LVM_LS_PREFIX)))
continue;
if (!(ls = alloc_lockspace())) {
if (closedir(ls_dir))
log_error("lm_get_lockspace_dlm: closedir failed");
return -ENOMEM;
}
ls->lm_type = LD_LM_DLM;
strncpy(ls->name, de->d_name, MAX_NAME);
strncpy(ls->vg_name, ls->name + strlen(LVM_LS_PREFIX), MAX_NAME);
list_add_tail(&ls->list, ls_rejoin);
}
closedir(ls_dir);
return 0;
}
int lm_is_running_dlm(void)
{
char sys_clustername[MAX_ARGS+1];
int rv;
memset(sys_clustername, 0, sizeof(sys_clustername));
rv = read_cluster_name(sys_clustername);
if (rv < 0)
return 0;
return 1;
}

View File

@@ -0,0 +1,542 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#ifndef _LVM_LVMLOCKD_INTERNAL_H
#define _LVM_LVMLOCKD_INTERNAL_H
#define MAX_NAME 64
#define MAX_ARGS 64
#define R_NAME_GL_DISABLED "_GLLK_disabled"
#define R_NAME_GL "GLLK"
#define R_NAME_VG "VGLK"
#define S_NAME_GL_DLM "lvm_global"
#define LVM_LS_PREFIX "lvm_" /* ls name is prefix + vg_name */
/* global lockspace name for sanlock is a vg name */
/* lock manager types */
enum {
LD_LM_NONE = 0,
LD_LM_UNUSED = 1, /* place holder so values match lib/locking/lvmlockd.h */
LD_LM_DLM = 2,
LD_LM_SANLOCK = 3,
};
/* operation types */
enum {
LD_OP_HELLO = 1,
LD_OP_QUIT,
LD_OP_INIT,
LD_OP_FREE,
LD_OP_START,
LD_OP_STOP,
LD_OP_LOCK,
LD_OP_UPDATE,
LD_OP_CLOSE,
LD_OP_ENABLE,
LD_OP_DISABLE,
LD_OP_START_WAIT,
LD_OP_STOP_ALL,
LD_OP_DUMP_INFO,
LD_OP_DUMP_LOG,
LD_OP_RENAME_BEFORE,
LD_OP_RENAME_FINAL,
LD_OP_RUNNING_LM,
LD_OP_FIND_FREE_LOCK,
LD_OP_FORGET_VG_NAME,
};
/* resource types */
enum {
LD_RT_GL = 1,
LD_RT_VG,
LD_RT_LV,
};
/* lock modes, more restrictive must be larger value */
enum {
LD_LK_IV = -1,
LD_LK_UN = 0,
LD_LK_NL = 1,
LD_LK_SH = 2,
LD_LK_EX = 3,
};
struct list_head {
struct list_head *next, *prev;
};
struct client {
struct list_head list;
pthread_mutex_t mutex;
int pid;
int fd;
int pi;
uint32_t id;
unsigned int recv : 1;
unsigned int dead : 1;
unsigned int poll_ignore : 1;
char name[MAX_NAME+1];
};
#define LD_AF_PERSISTENT 0x00000001
#define LD_AF_UNUSED 0x00000002 /* use me */
#define LD_AF_UNLOCK_CANCEL 0x00000004
#define LD_AF_NEXT_VERSION 0x00000008
#define LD_AF_WAIT 0x00000010
#define LD_AF_FORCE 0x00000020
#define LD_AF_EX_DISABLE 0x00000040
#define LD_AF_ENABLE 0x00000080
#define LD_AF_DISABLE 0x00000100
#define LD_AF_SEARCH_LS 0x00000200
#define LD_AF_WAIT_STARTING 0x00001000
#define LD_AF_DUP_GL_LS 0x00002000
#define LD_AF_INACTIVE_LS 0x00004000
#define LD_AF_ADD_LS_ERROR 0x00008000
#define LD_AF_ADOPT 0x00010000
/*
* Number of times to repeat a lock request after
* a lock conflict (-EAGAIN) if unspecified in the
* request.
*/
#define DEFAULT_MAX_RETRIES 4
struct action {
struct list_head list;
uint32_t client_id;
uint32_t flags; /* LD_AF_ */
uint32_t version;
uint64_t host_id;
int8_t op; /* operation type LD_OP_ */
int8_t rt; /* resource type LD_RT_ */
int8_t mode; /* lock mode LD_LK_ */
int8_t lm_type; /* lock manager: LM_DLM, LM_SANLOCK */
int retries;
int max_retries;
int result;
int lm_rv; /* return value from lm_ function */
char vg_uuid[64];
char vg_name[MAX_NAME+1];
char lv_name[MAX_NAME+1];
char lv_uuid[MAX_NAME+1];
char vg_args[MAX_ARGS+1];
char lv_args[MAX_ARGS+1];
char vg_sysid[MAX_NAME+1];
};
struct resource {
struct list_head list; /* lockspace.resources */
char name[MAX_NAME+1]; /* vg name or lv name */
int8_t type; /* resource type LD_RT_ */
int8_t mode;
unsigned int sh_count; /* number of sh locks on locks list */
uint32_t version;
unsigned int lm_init : 1; /* lm_data is initialized */
unsigned int adopt : 1; /* temp flag in remove_inactive_lvs */
unsigned int version_zero_valid : 1;
struct list_head locks;
struct list_head actions;
struct val_blk *vb;
char lv_args[MAX_ARGS+1];
char lm_data[0]; /* lock manager specific data */
};
#define LD_LF_PERSISTENT 0x00000001
struct lock {
struct list_head list; /* resource.locks */
int8_t mode; /* lock mode LD_LK_ */
uint32_t version;
uint32_t flags; /* LD_LF_ */
uint32_t client_id; /* may be 0 for persistent or internal locks */
};
struct lockspace {
struct list_head list; /* lockspaces */
char name[MAX_NAME+1];
char vg_name[MAX_NAME+1];
char vg_uuid[64];
char vg_args[MAX_ARGS+1]; /* lock manager specific args */
char vg_sysid[MAX_NAME+1];
int8_t lm_type; /* lock manager: LM_DLM, LM_SANLOCK */
void *lm_data;
uint64_t host_id;
uint64_t free_lock_offset; /* start search for free lock here */
uint32_t start_client_id; /* client_id that started the lockspace */
pthread_t thread; /* makes synchronous lock requests */
pthread_cond_t cond;
pthread_mutex_t mutex;
unsigned int create_fail : 1;
unsigned int create_done : 1;
unsigned int thread_work : 1;
unsigned int thread_stop : 1;
unsigned int thread_done : 1;
unsigned int sanlock_gl_enabled: 1;
unsigned int sanlock_gl_dup: 1;
struct list_head actions; /* new client actions */
struct list_head resources; /* resource/lock state for gl/vg/lv */
};
#define VAL_BLK_VERSION 0x0101
struct val_blk {
uint16_t version;
uint16_t flags;
uint32_t r_version;
};
/* lm_unlock flags */
#define LMUF_FREE_VG 0x00000001
#define container_of(ptr, type, member) ({ \
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
(type *)( (char *)__mptr - offsetof(type,member) );})
static inline void INIT_LIST_HEAD(struct list_head *list)
{
list->next = list;
list->prev = list;
}
static inline void __list_add(struct list_head *new,
struct list_head *prev,
struct list_head *next)
{
next->prev = new;
new->next = next;
new->prev = prev;
prev->next = new;
}
static inline void __list_del(struct list_head *prev, struct list_head *next)
{
next->prev = prev;
prev->next = next;
}
static inline void list_add(struct list_head *new, struct list_head *head)
{
__list_add(new, head, head->next);
}
static inline void list_add_tail(struct list_head *new, struct list_head *head)
{
__list_add(new, head->prev, head);
}
static inline void list_del(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
}
static inline int list_empty(const struct list_head *head)
{
return head->next == head;
}
#define list_entry(ptr, type, member) \
container_of(ptr, type, member)
#define list_first_entry(ptr, type, member) \
list_entry((ptr)->next, type, member)
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member); \
&pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
n = list_entry(pos->member.next, typeof(*pos), member); \
&pos->member != (head); \
pos = n, n = list_entry(n->member.next, typeof(*n), member))
/* to improve readability */
#define WAIT 1
#define NO_WAIT 0
#define FORCE 1
#define NO_FORCE 0
/*
* global variables
*/
#ifndef EXTERN
#define EXTERN extern
#define INIT(X)
#else
#undef EXTERN
#define EXTERN
#define INIT(X) =X
#endif
/*
* gl_type_static and gl_use_ are set by command line or config file
* to specify whether the global lock comes from dlm or sanlock.
* Without a static setting, lvmlockd will figure out where the
* global lock should be (but it could get mixed up in cases where
* both sanlock and dlm vgs exist.)
*
* gl_use_dlm means that the gl should come from lockspace gl_lsname_dlm
* gl_use_sanlock means that the gl should come from lockspace gl_lsname_sanlock
*
* gl_use_dlm has precedence over gl_use_sanlock, so if a node sees both
* dlm and sanlock vgs, it will use the dlm gl.
*
* gl_use_ is set when the first evidence of that lm_type is seen
* in any command.
*
* gl_lsname_sanlock is set when the first vg is seen in which an
* enabled gl is exists, or when init_vg creates a vg with gl enabled,
* or when enable_gl is used.
*
* gl_lsname_sanlock is cleared when free_vg deletes a vg with gl enabled
* or when disable_gl matches.
*/
EXTERN int gl_type_static;
EXTERN int gl_use_dlm;
EXTERN int gl_use_sanlock;
EXTERN pthread_mutex_t gl_type_mutex;
EXTERN char gl_lsname_dlm[MAX_NAME+1];
EXTERN char gl_lsname_sanlock[MAX_NAME+1];
EXTERN int gl_running_dlm;
EXTERN int gl_auto_dlm;
EXTERN int daemon_test; /* run as much as possible without a live lock manager */
EXTERN int daemon_debug;
EXTERN int daemon_host_id;
EXTERN const char *daemon_host_id_file;
EXTERN int sanlock_io_timeout;
void log_level(int level, const char *fmt, ...) __attribute__((format(printf, 2, 3)));
#define log_debug(fmt, args...) log_level(LOG_DEBUG, fmt, ##args)
#define log_error(fmt, args...) log_level(LOG_ERR, fmt, ##args)
#define log_warn(fmt, args...) log_level(LOG_WARNING, fmt, ##args)
struct lockspace *alloc_lockspace(void);
int lockspaces_empty(void);
int last_string_from_args(char *args_in, char *last);
int version_from_args(char *args, unsigned int *major, unsigned int *minor, unsigned int *patch);
#ifdef LOCKDDLM_SUPPORT
int lm_init_vg_dlm(char *ls_name, char *vg_name, uint32_t flags, char *vg_args);
int lm_prepare_lockspace_dlm(struct lockspace *ls);
int lm_add_lockspace_dlm(struct lockspace *ls, int adopt);
int lm_rem_lockspace_dlm(struct lockspace *ls, int free_vg);
int lm_lock_dlm(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version, int adopt);
int lm_convert_dlm(struct lockspace *ls, struct resource *r,
int ld_mode, uint32_t r_version);
int lm_unlock_dlm(struct lockspace *ls, struct resource *r,
uint32_t r_version, uint32_t lmu_flags);
int lm_rem_resource_dlm(struct lockspace *ls, struct resource *r);
int lm_get_lockspaces_dlm(struct list_head *ls_rejoin);
int lm_data_size_dlm(void);
int lm_is_running_dlm(void);
#else
static inline int lm_init_vg_dlm(char *ls_name, char *vg_name, uint32_t flags, char *vg_args)
{
return -1;
}
static inline int lm_prepare_lockspace_dlm(struct lockspace *ls)
{
return -1;
}
static inline int lm_add_lockspace_dlm(struct lockspace *ls, int adopt)
{
return -1;
}
static inline int lm_rem_lockspace_dlm(struct lockspace *ls, int free_vg)
{
return -1;
}
static inline int lm_lock_dlm(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version, int adopt)
{
return -1;
}
static inline int lm_convert_dlm(struct lockspace *ls, struct resource *r,
int ld_mode, uint32_t r_version)
{
return -1;
}
static inline int lm_unlock_dlm(struct lockspace *ls, struct resource *r,
uint32_t r_version, uint32_t lmu_flags)
{
return -1;
}
static inline int lm_rem_resource_dlm(struct lockspace *ls, struct resource *r)
{
return -1;
}
static inline int lm_get_lockspaces_dlm(struct list_head *ls_rejoin)
{
return -1;
}
static inline int lm_data_size_dlm(void)
{
return -1;
}
static inline int lm_is_running_dlm(void)
{
return 0;
}
#endif /* dlm support */
#ifdef LOCKDSANLOCK_SUPPORT
int lm_init_vg_sanlock(char *ls_name, char *vg_name, uint32_t flags, char *vg_args);
int lm_init_lv_sanlock(char *ls_name, char *vg_name, char *lv_name, char *vg_args, char *lv_args, uint64_t free_offset);
int lm_free_lv_sanlock(struct lockspace *ls, struct resource *r);
int lm_rename_vg_sanlock(char *ls_name, char *vg_name, uint32_t flags, char *vg_args);
int lm_prepare_lockspace_sanlock(struct lockspace *ls);
int lm_add_lockspace_sanlock(struct lockspace *ls, int adopt);
int lm_rem_lockspace_sanlock(struct lockspace *ls, int free_vg);
int lm_lock_sanlock(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version, int *retry, int adopt);
int lm_convert_sanlock(struct lockspace *ls, struct resource *r,
int ld_mode, uint32_t r_version);
int lm_unlock_sanlock(struct lockspace *ls, struct resource *r,
uint32_t r_version, uint32_t lmu_flags);
int lm_able_gl_sanlock(struct lockspace *ls, int enable);
int lm_ex_disable_gl_sanlock(struct lockspace *ls);
int lm_hosts_sanlock(struct lockspace *ls, int notify);
int lm_rem_resource_sanlock(struct lockspace *ls, struct resource *r);
int lm_gl_is_enabled(struct lockspace *ls);
int lm_get_lockspaces_sanlock(struct list_head *ls_rejoin);
int lm_data_size_sanlock(void);
int lm_is_running_sanlock(void);
int lm_find_free_lock_sanlock(struct lockspace *ls, uint64_t *free_offset);
#else
static inline int lm_init_vg_sanlock(char *ls_name, char *vg_name, uint32_t flags, char *vg_args)
{
return -1;
}
static inline int lm_init_lv_sanlock(char *ls_name, char *vg_name, char *lv_name, char *vg_args, char *lv_args, uint64_t free_offset)
{
return -1;
}
static inline int lm_free_lv_sanlock(struct lockspace *ls, struct resource *r)
{
return -1;
}
static inline int lm_rename_vg_sanlock(char *ls_name, char *vg_name, uint32_t flags, char *vg_args)
{
return -1;
}
static inline int lm_prepare_lockspace_sanlock(struct lockspace *ls)
{
return -1;
}
static inline int lm_add_lockspace_sanlock(struct lockspace *ls, int adopt)
{
return -1;
}
static inline int lm_rem_lockspace_sanlock(struct lockspace *ls, int free_vg)
{
return -1;
}
static inline int lm_lock_sanlock(struct lockspace *ls, struct resource *r, int ld_mode,
uint32_t *r_version, int *retry, int adopt)
{
return -1;
}
static inline int lm_convert_sanlock(struct lockspace *ls, struct resource *r,
int ld_mode, uint32_t r_version)
{
return -1;
}
static inline int lm_unlock_sanlock(struct lockspace *ls, struct resource *r,
uint32_t r_version, uint32_t lmu_flags)
{
return -1;
}
static inline int lm_able_gl_sanlock(struct lockspace *ls, int enable)
{
return -1;
}
static inline int lm_ex_disable_gl_sanlock(struct lockspace *ls)
{
return -1;
}
static inline int lm_hosts_sanlock(struct lockspace *ls, int notify)
{
return -1;
}
static inline int lm_rem_resource_sanlock(struct lockspace *ls, struct resource *r)
{
return -1;
}
static inline int lm_gl_is_enabled(struct lockspace *ls)
{
return -1;
}
static inline int lm_get_lockspaces_sanlock(struct list_head *ls_rejoin)
{
return -1;
}
static inline int lm_data_size_sanlock(void)
{
return -1;
}
static inline int lm_is_running_sanlock(void)
{
return 0;
}
static inline int lm_find_free_lock_sanlock(struct lockspace *ls, uint64_t *free_offset)
{
return -1;
}
#endif /* sanlock support */
#endif /* _LVM_LVMLOCKD_INTERNAL_H */

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,48 @@
#
# Copyright (C) 2014-2015 Red Hat, Inc.
#
# This file is part of LVM2.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU Lesser General Public License v.2.1.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = @top_builddir@
SOURCES = lvmpolld-core.c lvmpolld-data-utils.c lvmpolld-cmd-utils.c
TARGETS = lvmpolld
.PHONY: install_lvmpolld
CFLOW_LIST = $(SOURCES)
CFLOW_LIST_TARGET = $(LIB_NAME).cflow
CFLOW_TARGET = lvmpolld
include $(top_builddir)/make.tmpl
INCLUDES += -I$(top_srcdir)/libdaemon/server
LVMLIBS = -ldaemonserver $(LVMINTERNAL_LIBS) -ldevmapper
LIBS += $(PTHREAD_LIBS)
LDFLAGS += -L$(top_builddir)/libdaemon/server $(DAEMON_LDFLAGS)
CLDFLAGS += -L$(top_builddir)/libdaemon/server
CFLAGS += $(DAEMON_CFLAGS)
lvmpolld: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
$(top_builddir)/libdaemon/server/libdaemonserver.a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
install_lvmpolld: lvmpolld
$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)
install_lvm2: install_lvmpolld
install: install_lvm2

View File

@@ -0,0 +1,144 @@
/*
* Copyright (C) 2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "lvmpolld-common.h"
/* extract this info from autoconf/automake files */
#define LVPOLL_CMD "lvpoll"
#define MIN_ARGV_SIZE 8
static const char *const const polling_ops[] = { [PVMOVE] = LVMPD_REQ_PVMOVE,
[CONVERT] = LVMPD_REQ_CONVERT,
[MERGE] = LVMPD_REQ_MERGE,
[MERGE_THIN] = LVMPD_REQ_MERGE_THIN };
const char *polling_op(enum poll_type type)
{
return type < POLL_TYPE_MAX ? polling_ops[type] : "<undefined>";
}
static int add_to_cmd_arr(const char ***cmdargv, const char *str, unsigned *ind)
{
const char **newargv = *cmdargv;
if (*ind && !(*ind % MIN_ARGV_SIZE)) {
newargv = dm_realloc(*cmdargv, (*ind / MIN_ARGV_SIZE + 1) * MIN_ARGV_SIZE * sizeof(char *));
if (!newargv)
return 0;
*cmdargv = newargv;
}
*(*cmdargv + (*ind)++) = str;
return 1;
}
const char **cmdargv_ctr(const struct lvmpolld_lv *pdlv, const char *lvm_binary, unsigned abort_polling, unsigned handle_missing_pvs)
{
unsigned i = 0;
const char **cmd_argv = dm_malloc(MIN_ARGV_SIZE * sizeof(char *));
if (!cmd_argv)
return NULL;
/* path to lvm2 binary */
if (!add_to_cmd_arr(&cmd_argv, lvm_binary, &i))
goto err;
/* cmd to execute */
if (!add_to_cmd_arr(&cmd_argv, LVPOLL_CMD, &i))
goto err;
/* transfer internal polling interval */
if (pdlv->sinterval &&
(!add_to_cmd_arr(&cmd_argv, "--interval", &i) ||
!add_to_cmd_arr(&cmd_argv, pdlv->sinterval, &i)))
goto err;
/* pass abort param */
if (abort_polling &&
!add_to_cmd_arr(&cmd_argv, "--abort", &i))
goto err;
/* pass handle-missing-pvs. used by mirror polling operation */
if (handle_missing_pvs &&
!add_to_cmd_arr(&cmd_argv, "--handlemissingpvs", &i))
goto err;
/* one of: "convert", "pvmove", "merge", "merge_thin" */
if (!add_to_cmd_arr(&cmd_argv, "--polloperation", &i) ||
!add_to_cmd_arr(&cmd_argv, polling_ops[pdlv->type], &i))
goto err;
/* vg/lv name */
if (!add_to_cmd_arr(&cmd_argv, pdlv->lvname, &i))
goto err;
/* disable metadata backup */
if (!add_to_cmd_arr(&cmd_argv, "-An", &i))
goto err;
/* terminating NULL */
if (!add_to_cmd_arr(&cmd_argv, NULL, &i))
goto err;
return cmd_argv;
err:
dm_free(cmd_argv);
return NULL;
}
/* FIXME: in fact exclude should be va list */
static int copy_env(const char ***cmd_envp, unsigned *i, const char *exclude)
{
const char * const* tmp = (const char * const*) environ;
if (!tmp)
return 0;
while (*tmp) {
if (strncmp(*tmp, exclude, strlen(exclude)) && !add_to_cmd_arr(cmd_envp, *tmp, i))
return 0;
tmp++;
}
return 1;
}
const char **cmdenvp_ctr(const struct lvmpolld_lv *pdlv)
{
unsigned i = 0;
const char **cmd_envp = dm_malloc(MIN_ARGV_SIZE * sizeof(char *));
if (!cmd_envp)
return NULL;
/* copy whole environment from lvmpolld, exclude LVM_SYSTEM_DIR if set */
if (!copy_env(&cmd_envp, &i, "LVM_SYSTEM_DIR="))
goto err;
/* Add per client LVM_SYSTEM_DIR variable if set */
if (*pdlv->lvm_system_dir_env && !add_to_cmd_arr(&cmd_envp, pdlv->lvm_system_dir_env, &i))
goto err;
/* terminating NULL */
if (!add_to_cmd_arr(&cmd_envp, NULL, &i))
goto err;
return cmd_envp;
err:
dm_free(cmd_envp);
return NULL;
}

View File

@@ -0,0 +1,25 @@
/*
* Copyright (C) 2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LVM_LVMPOLLD_CMD_UTILS_H
#define _LVM_LVMPOLLD_CMD_UTILS_H
#include "lvmpolld-data-utils.h"
const char **cmdargv_ctr(const struct lvmpolld_lv *pdlv, const char *lvm_binary, unsigned abort, unsigned handle_missing_pvs);
const char **cmdenvp_ctr(const struct lvmpolld_lv *pdlv);
const char *polling_op(enum poll_type);
#endif /* _LVM_LVMPOLLD_CMD_UTILS_H */

View File

@@ -0,0 +1,31 @@
/*
* Copyright (C) 2010-2015 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* This file must be included first by every lvmpolld source file.
*/
#ifndef _LVM_LVMPOLLD_COMMON_H
#define _LVM_LVMPOLLD_COMMON_H
#define _REENTRANT
#include "tool.h"
#include "lvmpolld-cmd-utils.h"
#include "lvmpolld-protocol.h"
#include <assert.h>
#include <errno.h>
#endif /* _LVM_LVMPOLLD_COMMON_H */

View File

@@ -0,0 +1,984 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "lvmpolld-common.h"
#include "lvm-version.h"
#include "daemon-server.h"
#include "daemon-log.h"
#include <getopt.h>
#include <poll.h>
#include <wait.h>
#define LVMPOLLD_SOCKET DEFAULT_RUN_DIR "/lvmpolld.socket"
#define PD_LOG_PREFIX "LVMPOLLD"
#define LVM2_LOG_PREFIX "\tLVPOLL"
/* predefined reason for response = "failed" case */
#define REASON_REQ_NOT_IMPLEMENTED "request not implemented"
#define REASON_MISSING_LVID "request requires lvid set"
#define REASON_MISSING_LVNAME "request requires lvname set"
#define REASON_MISSING_VGNAME "request requires vgname set"
#define REASON_POLLING_FAILED "polling of lvm command failed"
#define REASON_ILLEGAL_ABORT_REQUEST "abort only supported with PVMOVE polling operation"
#define REASON_DIFFERENT_OPERATION_IN_PROGRESS "Different operation on LV already in progress"
#define REASON_INVALID_INTERVAL "request requires interval set"
#define REASON_ENOMEM "not enough memory"
struct lvmpolld_state {
daemon_idle *idle;
log_state *log;
const char *log_config;
const char *lvm_binary;
struct lvmpolld_store *id_to_pdlv_abort;
struct lvmpolld_store *id_to_pdlv_poll;
};
static pthread_key_t key;
static const char *_strerror_r(int errnum, struct lvmpolld_thread_data *data)
{
#ifdef _GNU_SOURCE
return strerror_r(errnum, data->buf, sizeof(data->buf)); /* never returns NULL */
#elif (_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600)
return strerror_r(errnum, data->buf, sizeof(data->buf)) ? "" : data->buf;
#else
# warning "Can't decide proper strerror_r implementation. lvmpolld will not issue specific system error messages"
return "";
#endif
}
static void _usage(const char *prog, FILE *file)
{
fprintf(file, "Usage:\n"
"%s [-V] [-h] [-f] [-l {all|wire|debug}] [-s path] [-B path] [-p path] [-t secs]\n"
"%s --dump [-s path]\n"
" -V|--version Show version info\n"
" -h|--help Show this help information\n"
" -f|--foreground Don't fork, run in the foreground\n"
" --dump Dump full lvmpolld state\n"
" -l|--log Logging message level (-l {all|wire|debug})\n"
" -p|--pidfile Set path to the pidfile\n"
" -s|--socket Set path to the communication socket\n"
" -B|--binary Path to lvm2 binary\n"
" -t|--timeout Time to wait in seconds before shutdown on idle (missing or 0 = inifinite)\n\n", prog, prog);
}
static int _init(struct daemon_state *s)
{
struct lvmpolld_state *ls = s->private;
ls->log = s->log;
if (!daemon_log_parse(ls->log, DAEMON_LOG_OUTLET_STDERR, ls->log_config, 1))
return 0;
if (pthread_key_create(&key, lvmpolld_thread_data_destroy)) {
FATAL(ls, "%s: %s", PD_LOG_PREFIX, "Failed to create pthread key");
return 0;
}
ls->id_to_pdlv_poll = pdst_init("polling");
ls->id_to_pdlv_abort = pdst_init("abort");
if (!ls->id_to_pdlv_poll || !ls->id_to_pdlv_abort) {
FATAL(ls, "%s: %s", PD_LOG_PREFIX, "Failed to allocate internal data structures");
return 0;
}
ls->lvm_binary = ls->lvm_binary ?: LVM_PATH;
if (access(ls->lvm_binary, X_OK)) {
FATAL(ls, "%s: %s %s", PD_LOG_PREFIX, "Execute access rights denied on", ls->lvm_binary);
return 0;
}
if (ls->idle)
ls->idle->is_idle = 1;
return 1;
}
static void _lvmpolld_stores_lock(struct lvmpolld_state *ls)
{
pdst_lock(ls->id_to_pdlv_poll);
pdst_lock(ls->id_to_pdlv_abort);
}
static void _lvmpolld_stores_unlock(struct lvmpolld_state *ls)
{
pdst_unlock(ls->id_to_pdlv_abort);
pdst_unlock(ls->id_to_pdlv_poll);
}
static void _lvmpolld_global_lock(struct lvmpolld_state *ls)
{
_lvmpolld_stores_lock(ls);
pdst_locked_lock_all_pdlvs(ls->id_to_pdlv_poll);
pdst_locked_lock_all_pdlvs(ls->id_to_pdlv_abort);
}
static void _lvmpolld_global_unlock(struct lvmpolld_state *ls)
{
pdst_locked_unlock_all_pdlvs(ls->id_to_pdlv_abort);
pdst_locked_unlock_all_pdlvs(ls->id_to_pdlv_poll);
_lvmpolld_stores_unlock(ls);
}
static int _fini(struct daemon_state *s)
{
int done;
const struct timespec t = { .tv_nsec = 250000000 }; /* .25 sec */
struct lvmpolld_state *ls = s->private;
DEBUGLOG(s, "fini");
DEBUGLOG(s, "sending cancel requests");
_lvmpolld_global_lock(ls);
pdst_locked_send_cancel(ls->id_to_pdlv_poll);
pdst_locked_send_cancel(ls->id_to_pdlv_abort);
_lvmpolld_global_unlock(ls);
DEBUGLOG(s, "waiting for background threads to finish");
while(1) {
_lvmpolld_stores_lock(ls);
done = !pdst_locked_get_active_count(ls->id_to_pdlv_poll) &&
!pdst_locked_get_active_count(ls->id_to_pdlv_abort);
_lvmpolld_stores_unlock(ls);
if (done)
break;
nanosleep(&t, NULL);
}
DEBUGLOG(s, "destroying internal data structures");
_lvmpolld_stores_lock(ls);
pdst_locked_destroy_all_pdlvs(ls->id_to_pdlv_poll);
pdst_locked_destroy_all_pdlvs(ls->id_to_pdlv_abort);
_lvmpolld_stores_unlock(ls);
pdst_destroy(ls->id_to_pdlv_poll);
pdst_destroy(ls->id_to_pdlv_abort);
pthread_key_delete(key);
return 1;
}
static response reply(const char *res, const char *reason)
{
return daemon_reply_simple(res, "reason = %s", reason, NULL);
}
static int read_single_line(struct lvmpolld_thread_data *data, int err)
{
ssize_t r = getline(&data->line, &data->line_size, err ? data->ferr : data->fout);
if (r > 0 && *(data->line + r - 1) == '\n')
*(data->line + r - 1) = '\0';
return (r > 0);
}
static void update_idle_state(struct lvmpolld_state *ls)
{
if (!ls->idle)
return;
_lvmpolld_stores_lock(ls);
ls->idle->is_idle = !pdst_locked_get_active_count(ls->id_to_pdlv_poll) &&
!pdst_locked_get_active_count(ls->id_to_pdlv_abort);
_lvmpolld_stores_unlock(ls);
DEBUGLOG(ls, "%s: %s %s%s", PD_LOG_PREFIX, "daemon is", ls->idle->is_idle ? "" : "not ", "idle");
}
/* make this configurable */
#define MAX_TIMEOUT 2
static int poll_for_output(struct lvmpolld_lv *pdlv, struct lvmpolld_thread_data *data)
{
int ch_stat, r, err = 1, fds_count = 2, timeout = 0;
pid_t pid;
struct lvmpolld_cmd_stat cmd_state = { .retcode = -1, .signal = 0 };
struct pollfd fds[] = { { .fd = data->outpipe[0], .events = POLLIN },
{ .fd = data->errpipe[0], .events = POLLIN } };
if (!(data->fout = fdopen(data->outpipe[0], "r")) || !(data->ferr = fdopen(data->errpipe[0], "r"))) {
ERROR(pdlv->ls, "%s: %s: (%d) %s", PD_LOG_PREFIX, "failed to open file stream",
errno, _strerror_r(errno, data));
goto out;
}
while (1) {
do {
r = poll(fds, 2, pdlv_get_timeout(pdlv) * 1000);
} while (r < 0 && errno == EINTR);
DEBUGLOG(pdlv->ls, "%s: %s %d", PD_LOG_PREFIX, "poll() returned", r);
if (r < 0) {
ERROR(pdlv->ls, "%s: %s (PID %d) failed: (%d) %s",
PD_LOG_PREFIX, "poll() for LVM2 cmd", pdlv->cmd_pid,
errno, _strerror_r(errno, data));
goto out;
} else if (!r) {
timeout++;
WARN(pdlv->ls, "%s: %s (PID %d) %s", PD_LOG_PREFIX,
"polling for output of the lvm cmd", pdlv->cmd_pid,
"has timed out");
if (timeout > MAX_TIMEOUT) {
ERROR(pdlv->ls, "%s: %s (PID %d) (no output for %d seconds)",
PD_LOG_PREFIX,
"LVM2 cmd is unresponsive too long",
pdlv->cmd_pid,
timeout * pdlv_get_timeout(pdlv));
goto out;
}
continue; /* while(1) */
}
timeout = 0;
/* handle the command's STDOUT */
if (fds[0].revents & POLLIN) {
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "caught input data in STDOUT");
assert(read_single_line(data, 0)); /* may block indef. anyway */
INFO(pdlv->ls, "%s: PID %d: %s: '%s'", LVM2_LOG_PREFIX,
pdlv->cmd_pid, "STDOUT", data->line);
} else if (fds[0].revents) {
if (fds[0].revents & POLLHUP)
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "caught POLLHUP");
else
WARN(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "poll for command's STDOUT failed");
fds[0].fd = -1;
fds_count--;
}
/* handle the command's STDERR */
if (fds[1].revents & POLLIN) {
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX,
"caught input data in STDERR");
assert(read_single_line(data, 1)); /* may block indef. anyway */
INFO(pdlv->ls, "%s: PID %d: %s: '%s'", LVM2_LOG_PREFIX,
pdlv->cmd_pid, "STDERR", data->line);
} else if (fds[1].revents) {
if (fds[1].revents & POLLHUP)
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "caught err POLLHUP");
else
WARN(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "poll for command's STDOUT failed");
fds[1].fd = -1;
fds_count--;
}
do {
/*
* fds_count == 0 means polling reached EOF
* or received error on both descriptors.
* In such case, just wait for command to finish
*/
pid = waitpid(pdlv->cmd_pid, &ch_stat, fds_count ? WNOHANG : 0);
} while (pid < 0 && errno == EINTR);
if (pid) {
if (pid < 0) {
ERROR(pdlv->ls, "%s: %s (PID %d) failed: (%d) %s",
PD_LOG_PREFIX, "waitpid() for lvm2 cmd",
pdlv->cmd_pid, errno,
_strerror_r(errno, data));
goto out;
}
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "child exited");
break;
}
} /* while(1) */
DEBUGLOG(pdlv->ls, "%s: %s", PD_LOG_PREFIX, "about to collect remaining lines");
if (fds[0].fd >= 0)
while (read_single_line(data, 0)) {
assert(r > 0);
INFO(pdlv->ls, "%s: PID %d: %s: %s", LVM2_LOG_PREFIX, pdlv->cmd_pid, "STDOUT", data->line);
}
if (fds[1].fd >= 0)
while (read_single_line(data, 1)) {
assert(r > 0);
INFO(pdlv->ls, "%s: PID %d: %s: %s", LVM2_LOG_PREFIX, pdlv->cmd_pid, "STDERR", data->line);
}
if (WIFEXITED(ch_stat)) {
INFO(pdlv->ls, "%s: %s (PID %d) %s (%d)", PD_LOG_PREFIX,
"lvm2 cmd", pdlv->cmd_pid, "exited with", WEXITSTATUS(ch_stat));
cmd_state.retcode = WEXITSTATUS(ch_stat);
} else if (WIFSIGNALED(ch_stat)) {
WARN(pdlv->ls, "%s: %s (PID %d) %s (%d)", PD_LOG_PREFIX,
"lvm2 cmd", pdlv->cmd_pid, "got terminated by signal",
WTERMSIG(ch_stat));
cmd_state.signal = WTERMSIG(ch_stat);
}
err = 0;
out:
if (!err)
pdlv_set_cmd_state(pdlv, &cmd_state);
return err;
}
static void debug_print(struct lvmpolld_state *ls, const char * const* ptr)
{
const char * const* tmp = ptr;
if (!tmp)
return;
while (*tmp) {
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, *tmp);
tmp++;
}
}
static void *fork_and_poll(void *args)
{
int outfd, errfd, state;
struct lvmpolld_thread_data *data;
pid_t r;
int error = 1;
struct lvmpolld_lv *pdlv = (struct lvmpolld_lv *) args;
struct lvmpolld_state *ls = pdlv->ls;
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &state);
data = lvmpolld_thread_data_constructor(pdlv);
pthread_setspecific(key, data);
pthread_setcancelstate(state, &state);
if (!data) {
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "Failed to initialize per-thread data");
goto err;
}
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, "cmd line arguments:");
debug_print(ls, pdlv->cmdargv);
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, "---end---");
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, "cmd environment variables:");
debug_print(ls, pdlv->cmdenvp);
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, "---end---");
outfd = data->outpipe[1];
errfd = data->errpipe[1];
r = fork();
if (!r) {
/* child */
/* !!! Do not touch any posix thread primitives !!! */
if ((dup2(outfd, STDOUT_FILENO ) != STDOUT_FILENO) ||
(dup2(errfd, STDERR_FILENO ) != STDERR_FILENO))
_exit(LVMPD_RET_DUP_FAILED);
execve(*(pdlv->cmdargv), (char *const *)pdlv->cmdargv, (char *const *)pdlv->cmdenvp);
_exit(LVMPD_RET_EXC_FAILED);
} else {
/* parent */
if (r == -1) {
ERROR(ls, "%s: %s: (%d) %s", PD_LOG_PREFIX, "fork failed",
errno, _strerror_r(errno, data));
goto err;
}
INFO(ls, "%s: LVM2 cmd \"%s\" (PID: %d)", PD_LOG_PREFIX, *(pdlv->cmdargv), r);
pdlv->cmd_pid = r;
/* failure to close write end of any pipe will result in broken polling */
if (close(data->outpipe[1])) {
ERROR(ls, "%s: %s: (%d) %s", PD_LOG_PREFIX, "failed to close write end of pipe",
errno, _strerror_r(errno, data));
goto err;
}
data->outpipe[1] = -1;
if (close(data->errpipe[1])) {
ERROR(ls, "%s: %s: (%d) %s", PD_LOG_PREFIX, "failed to close write end of err pipe",
errno, _strerror_r(errno, data));
goto err;
}
data->errpipe[1] = -1;
error = poll_for_output(pdlv, data);
DEBUGLOG(ls, "%s: %s", PD_LOG_PREFIX, "polling for lvpoll output has finished");
}
err:
r = 0;
pdst_lock(pdlv->pdst);
if (error) {
/* last reader is responsible for pdlv cleanup */
r = pdlv->cmd_pid;
pdlv_set_error(pdlv, 1);
}
pdlv_set_polling_finished(pdlv, 1);
if (data)
data->pdlv = NULL;
pdst_locked_dec(pdlv->pdst);
pdst_unlock(pdlv->pdst);
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &state);
lvmpolld_thread_data_destroy(data);
pthread_setspecific(key, NULL);
pthread_setcancelstate(state, &state);
update_idle_state(ls);
/*
* This is unfortunate case where we
* know nothing about state of lvm cmd and
* (eventually) ongoing progress.
*
* harvest zombies
*/
if (r)
while(waitpid(r, NULL, 0) < 0 && errno == EINTR);
return NULL;
}
static response progress_info(client_handle h, struct lvmpolld_state *ls, request req)
{
char *id;
struct lvmpolld_lv *pdlv;
struct lvmpolld_store *pdst;
struct lvmpolld_lv_state st;
response r;
const char *lvid = daemon_request_str(req, LVMPD_PARM_LVID, NULL);
const char *sysdir = daemon_request_str(req, LVMPD_PARM_SYSDIR, NULL);
unsigned abort_polling = daemon_request_int(req, LVMPD_PARM_ABORT, 0);
if (!lvid)
return reply(LVMPD_RESP_FAILED, REASON_MISSING_LVID);
id = construct_id(sysdir, lvid);
if (!id) {
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "progress_info request failed to construct ID.");
return reply(LVMPD_RESP_FAILED, REASON_ENOMEM);
}
DEBUGLOG(ls, "%s: %s: %s", PD_LOG_PREFIX, "ID", id);
pdst = abort_polling ? ls->id_to_pdlv_abort : ls->id_to_pdlv_poll;
pdst_lock(pdst);
pdlv = pdst_locked_lookup(pdst, id);
if (pdlv) {
/*
* with store lock held, I'm the only reader accessing the pdlv
*/
st = pdlv_get_status(pdlv);
if (st.error || st.polling_finished) {
INFO(ls, "%s: %s %s", PD_LOG_PREFIX,
"Polling finished. Removing related data structure for LV",
lvid);
pdst_locked_remove(pdst, id);
pdlv_destroy(pdlv);
}
}
/* pdlv must not be dereferenced from now on */
pdst_unlock(pdst);
dm_free(id);
if (pdlv) {
if (st.error)
return reply(LVMPD_RESP_FAILED, REASON_POLLING_FAILED);
if (st.polling_finished)
r = daemon_reply_simple(LVMPD_RESP_FINISHED,
"reason = %s", st.cmd_state.signal ? LVMPD_REAS_SIGNAL : LVMPD_REAS_RETCODE,
LVMPD_PARM_VALUE " = %d", (int64_t)(st.cmd_state.signal ?: st.cmd_state.retcode),
NULL);
else
r = daemon_reply_simple(LVMPD_RESP_IN_PROGRESS, NULL);
}
else
r = daemon_reply_simple(LVMPD_RESP_NOT_FOUND, NULL);
return r;
}
static struct lvmpolld_lv *construct_pdlv(request req, struct lvmpolld_state *ls,
struct lvmpolld_store *pdst,
const char *interval, const char *id,
const char *vgname, const char *lvname,
const char *sysdir, enum poll_type type,
unsigned abort_polling, unsigned uinterval)
{
const char **cmdargv, **cmdenvp;
struct lvmpolld_lv *pdlv;
unsigned handle_missing_pvs = daemon_request_int(req, LVMPD_PARM_HANDLE_MISSING_PVS, 0);
pdlv = pdlv_create(ls, id, vgname, lvname, sysdir, type,
interval, uinterval, pdst);
if (!pdlv) {
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "failed to create internal LV data structure.");
return NULL;
}
cmdargv = cmdargv_ctr(pdlv, pdlv->ls->lvm_binary, abort_polling, handle_missing_pvs);
if (!cmdargv) {
pdlv_destroy(pdlv);
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "failed to construct cmd arguments for lvpoll command");
return NULL;
}
cmdenvp = cmdenvp_ctr(pdlv);
if (!cmdenvp) {
pdlv_destroy(pdlv);
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "failed to construct cmd environment for lvpoll command");
return NULL;
}
pdlv->cmdargv = cmdargv;
pdlv->cmdenvp = cmdenvp;
return pdlv;
}
static int spawn_detached_thread(struct lvmpolld_lv *pdlv)
{
int r;
pthread_attr_t attr;
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
r = pthread_create(&pdlv->tid, &attr, fork_and_poll, (void *)pdlv);
pthread_attr_destroy(&attr);
return !r;
}
static response poll_init(client_handle h, struct lvmpolld_state *ls, request req, enum poll_type type)
{
char *id;
struct lvmpolld_lv *pdlv;
struct lvmpolld_store *pdst;
unsigned uinterval;
const char *interval = daemon_request_str(req, LVMPD_PARM_INTERVAL, NULL);
const char *lvid = daemon_request_str(req, LVMPD_PARM_LVID, NULL);
const char *lvname = daemon_request_str(req, LVMPD_PARM_LVNAME, NULL);
const char *vgname = daemon_request_str(req, LVMPD_PARM_VGNAME, NULL);
const char *sysdir = daemon_request_str(req, LVMPD_PARM_SYSDIR, NULL);
unsigned abort_polling = daemon_request_int(req, LVMPD_PARM_ABORT, 0);
assert(type < POLL_TYPE_MAX);
if (abort_polling && type != PVMOVE)
return reply(LVMPD_RESP_EINVAL, REASON_ILLEGAL_ABORT_REQUEST);
if (!interval || strpbrk(interval, "-") || sscanf(interval, "%u", &uinterval) != 1)
return reply(LVMPD_RESP_EINVAL, REASON_INVALID_INTERVAL);
if (!lvname)
return reply(LVMPD_RESP_FAILED, REASON_MISSING_LVNAME);
if (!lvid)
return reply(LVMPD_RESP_FAILED, REASON_MISSING_LVID);
if (!vgname)
return reply(LVMPD_RESP_FAILED, REASON_MISSING_VGNAME);
id = construct_id(sysdir, lvid);
if (!id) {
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "poll_init request failed to construct ID.");
return reply(LVMPD_RESP_FAILED, REASON_ENOMEM);
}
DEBUGLOG(ls, "%s: %s=%s", PD_LOG_PREFIX, "ID", id);
pdst = abort_polling ? ls->id_to_pdlv_abort : ls->id_to_pdlv_poll;
pdst_lock(pdst);
pdlv = pdst_locked_lookup(pdst, id);
if (pdlv && pdlv_get_polling_finished(pdlv)) {
WARN(ls, "%s: %s %s", PD_LOG_PREFIX, "Force removal of uncollected info for LV",
lvid);
/*
* lvmpolld has to remove uncollected results in this case.
* otherwise it would have to refuse request for new polling
* lv with same id.
*/
pdst_locked_remove(pdst, id);
pdlv_destroy(pdlv);
pdlv = NULL;
}
if (pdlv) {
if (!pdlv_is_type(pdlv, type)) {
pdst_unlock(pdst);
ERROR(ls, "%s: %s '%s': expected: %s, requested: %s",
PD_LOG_PREFIX, "poll operation type mismatch on LV identified by",
id,
polling_op(pdlv_get_type(pdlv)), polling_op(type));
dm_free(id);
return reply(LVMPD_RESP_EINVAL,
REASON_DIFFERENT_OPERATION_IN_PROGRESS);
}
pdlv->init_rq_count++; /* safe. protected by store lock */
} else {
pdlv = construct_pdlv(req, ls, pdst, interval, id, vgname,
lvname, sysdir, type, abort_polling, 2 * uinterval);
if (!pdlv) {
pdst_unlock(pdst);
dm_free(id);
return reply(LVMPD_RESP_FAILED, REASON_ENOMEM);
}
if (!pdst_locked_insert(pdst, id, pdlv)) {
pdlv_destroy(pdlv);
pdst_unlock(pdst);
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "couldn't store internal LV data structure");
dm_free(id);
return reply(LVMPD_RESP_FAILED, REASON_ENOMEM);
}
if (!spawn_detached_thread(pdlv)) {
ERROR(ls, "%s: %s", PD_LOG_PREFIX, "failed to spawn detached monitoring thread");
pdst_locked_remove(pdst, id);
pdlv_destroy(pdlv);
pdst_unlock(pdst);
dm_free(id);
return reply(LVMPD_RESP_FAILED, REASON_ENOMEM);
}
pdst_locked_inc(pdst);
if (ls->idle)
ls->idle->is_idle = 0;
}
pdst_unlock(pdst);
dm_free(id);
return daemon_reply_simple(LVMPD_RESP_OK, NULL);
}
static response dump_state(client_handle h, struct lvmpolld_state *ls, request r)
{
response res = { 0 };
struct buffer *b = &res.buffer;
buffer_init(b);
_lvmpolld_global_lock(ls);
buffer_append(b, "# Registered polling operations\n\n");
buffer_append(b, "poll {\n");
pdst_locked_dump(ls->id_to_pdlv_poll, b);
buffer_append(b, "}\n\n");
buffer_append(b, "# Registered abort operations\n\n");
buffer_append(b, "abort {\n");
pdst_locked_dump(ls->id_to_pdlv_abort, b);
buffer_append(b, "}");
_lvmpolld_global_unlock(ls);
return res;
}
static response _handler(struct daemon_state s, client_handle h, request r)
{
struct lvmpolld_state *ls = s.private;
const char *rq = daemon_request_str(r, "request", "NONE");
if (!strcmp(rq, LVMPD_REQ_PVMOVE))
return poll_init(h, ls, r, PVMOVE);
else if (!strcmp(rq, LVMPD_REQ_CONVERT))
return poll_init(h, ls, r, CONVERT);
else if (!strcmp(rq, LVMPD_REQ_MERGE))
return poll_init(h, ls, r, MERGE);
else if (!strcmp(rq, LVMPD_REQ_MERGE_THIN))
return poll_init(h, ls, r, MERGE_THIN);
else if (!strcmp(rq, LVMPD_REQ_PROGRESS))
return progress_info(h, ls, r);
else if (!strcmp(rq, LVMPD_REQ_DUMP))
return dump_state(h, ls, r);
else
return reply(LVMPD_RESP_EINVAL, REASON_REQ_NOT_IMPLEMENTED);
}
static int process_timeout_arg(const char *str, unsigned *max_timeouts)
{
char *endptr;
unsigned long l;
errno = 0;
l = strtoul(str, &endptr, 10);
if (errno || *endptr || l >= UINT_MAX)
return 0;
*max_timeouts = (unsigned) l;
return 1;
}
/* Client functionality */
typedef int (*action_fn_t) (void *args);
struct log_line_baton {
const char *prefix;
};
daemon_handle _lvmpolld = { .error = 0 };
static daemon_handle _lvmpolld_open(const char *socket)
{
daemon_info lvmpolld_info = {
.path = "lvmpolld",
.socket = socket ?: DEFAULT_RUN_DIR "/lvmpolld.socket",
.protocol = LVMPOLLD_PROTOCOL,
.protocol_version = LVMPOLLD_PROTOCOL_VERSION
};
return daemon_open(lvmpolld_info);
}
static void _log_line(const char *line, void *baton) {
struct log_line_baton *b = baton;
fprintf(stdout, "%s%s\n", b->prefix, line);
}
static int printout_raw_response(const char *prefix, const char *msg)
{
struct log_line_baton b = { .prefix = prefix };
char *buf;
char *pos;
buf = dm_strdup(msg);
pos = buf;
if (!buf)
return 0;
while (pos) {
char *next = strchr(pos, '\n');
if (next)
*next = 0;
_log_line(pos, &b);
pos = next ? next + 1 : 0;
}
dm_free(buf);
return 1;
}
/* place all action implementations below */
static int action_dump(void *args __attribute__((unused)))
{
daemon_request req;
daemon_reply repl;
int r = 0;
req = daemon_request_make(LVMPD_REQ_DUMP);
if (!req.cft) {
fprintf(stderr, "Failed to create lvmpolld " LVMPD_REQ_DUMP " request.\n");
goto out_req;
}
repl = daemon_send(_lvmpolld, req);
if (repl.error) {
fprintf(stderr, "Failed to send a request or receive response.\n");
goto out_rep;
}
/*
* This is dumb copy & paste from libdaemon log routines.
*/
if (!printout_raw_response(" ", repl.buffer.mem)) {
fprintf(stderr, "Failed to print out the response.\n");
goto out_rep;
}
r = 1;
out_rep:
daemon_reply_destroy(repl);
out_req:
daemon_request_destroy(req);
return r;
}
enum action_index {
ACTION_DUMP = 0,
ACTION_MAX /* keep at the end */
};
static const action_fn_t actions[ACTION_MAX] = { [ACTION_DUMP] = action_dump };
static int _make_action(enum action_index idx, void *args)
{
return idx < ACTION_MAX ? actions[idx](args) : 0;
}
static int _lvmpolld_client(const char *socket, unsigned action)
{
int r;
_lvmpolld = _lvmpolld_open(socket);
if (_lvmpolld.error || _lvmpolld.socket_fd < 0) {
fprintf(stderr, "Failed to establish connection with lvmpolld.\n");
return 0;
}
r = _make_action(action, NULL);
daemon_close(_lvmpolld);
return r ? EXIT_SUCCESS : EXIT_FAILURE;
}
static int action_idx = ACTION_MAX;
static struct option long_options[] = {
/* Have actions always at the beginning of the array. */
{"dump", no_argument, &action_idx, ACTION_DUMP }, /* or an option_index ? */
/* other options */
{"binary", required_argument, 0, 'B' },
{"foreground", no_argument, 0, 'f' },
{"help", no_argument, 0, 'h' },
{"log", required_argument, 0, 'l' },
{"pidfile", required_argument, 0, 'p' },
{"socket", required_argument, 0, 's' },
{"timeout", required_argument, 0, 't' },
{"version", no_argument, 0, 'V' },
{0, 0, 0, 0 }
};
int main(int argc, char *argv[])
{
int opt;
int option_index = 0;
int client = 0, server = 0;
unsigned action = ACTION_MAX;
struct timeval timeout;
daemon_idle di = { .ptimeout = &timeout };
struct lvmpolld_state ls = { .log_config = "" };
daemon_state s = {
.daemon_fini = _fini,
.daemon_init = _init,
.handler = _handler,
.name = "lvmpolld",
.pidfile = getenv("LVM_LVMPOLLD_PIDFILE") ?: LVMPOLLD_PIDFILE,
.private = &ls,
.protocol = LVMPOLLD_PROTOCOL,
.protocol_version = LVMPOLLD_PROTOCOL_VERSION,
.socket_path = getenv("LVM_LVMPOLLD_SOCKET") ?: LVMPOLLD_SOCKET,
};
while ((opt = getopt_long(argc, argv, "fhVl:p:s:B:t:", long_options, &option_index)) != -1) {
switch (opt) {
case 0 :
if (action < ACTION_MAX) {
fprintf(stderr, "Can't perform more actions. Action already requested: %s\n",
long_options[action].name);
_usage(argv[0], stderr);
exit(EXIT_FAILURE);
}
action = action_idx;
client = 1;
break;
case '?':
_usage(argv[0], stderr);
exit(EXIT_FAILURE);
case 'B': /* --binary */
ls.lvm_binary = optarg;
server = 1;
break;
case 'V': /* --version */
printf("lvmpolld version: " LVM_VERSION "\n");
exit(EXIT_SUCCESS);
case 'f': /* --foreground */
s.foreground = 1;
server = 1;
break;
case 'h': /* --help */
_usage(argv[0], stdout);
exit(EXIT_SUCCESS);
case 'l': /* --log */
ls.log_config = optarg;
server = 1;
break;
case 'p': /* --pidfile */
s.pidfile = optarg;
server = 1;
break;
case 's': /* --socket */
s.socket_path = optarg;
break;
case 't': /* --timeout in seconds */
if (!process_timeout_arg(optarg, &di.max_timeouts)) {
fprintf(stderr, "Invalid value of timeout parameter.\n");
exit(EXIT_FAILURE);
}
/* 0 equals to wait indefinitely */
if (di.max_timeouts)
s.idle = ls.idle = &di;
server = 1;
break;
}
}
if (client && server) {
fprintf(stderr, "Invalid combination of client and server parameters.\n\n");
_usage(argv[0], stdout);
exit(EXIT_FAILURE);
}
if (client)
return _lvmpolld_client(s.socket_path, action);
/* Server */
daemon_start(s);
return EXIT_SUCCESS;
}

View File

@@ -0,0 +1,391 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "lvmpolld-common.h"
#include "config-util.h"
#include <fcntl.h>
#include <signal.h>
static char *_construct_full_lvname(const char *vgname, const char *lvname)
{
char *name;
size_t l;
l = strlen(vgname) + strlen(lvname) + 2; /* vg/lv and \0 */
name = (char *) dm_malloc(l * sizeof(char));
if (!name)
return NULL;
if (dm_snprintf(name, l, "%s/%s", vgname, lvname) < 0) {
dm_free(name);
name = NULL;
}
return name;
}
static char *_construct_lvm_system_dir_env(const char *sysdir)
{
/*
* Store either "LVM_SYSTEM_DIR=/path/to..."
* - or -
* just single char to store NULL byte
*/
size_t l = sysdir ? strlen(sysdir) + 16 : 1;
char *env = (char *) dm_malloc(l * sizeof(char));
if (!env)
return NULL;
*env = '\0';
if (sysdir && dm_snprintf(env, l, "LVM_SYSTEM_DIR=%s", sysdir) < 0) {
dm_free(env);
env = NULL;
}
return env;
}
static const char *_get_lvid(const char *lvmpolld_id, const char *sysdir)
{
return lvmpolld_id ? (lvmpolld_id + (sysdir ? strlen(sysdir) : 0)) : NULL;
}
char *construct_id(const char *sysdir, const char *uuid)
{
char *id;
int r;
size_t l;
l = strlen(uuid) + (sysdir ? strlen(sysdir) : 0) + 1;
id = (char *) dm_malloc(l * sizeof(char));
if (!id)
return NULL;
r = sysdir ? dm_snprintf(id, l, "%s%s", sysdir, uuid) :
dm_snprintf(id, l, "%s", uuid);
if (r < 0) {
dm_free(id);
id = NULL;
}
return id;
}
struct lvmpolld_lv *pdlv_create(struct lvmpolld_state *ls, const char *id,
const char *vgname, const char *lvname,
const char *sysdir, enum poll_type type,
const char *sinterval, unsigned pdtimeout,
struct lvmpolld_store *pdst)
{
char *lvmpolld_id = dm_strdup(id), /* copy */
*full_lvname = _construct_full_lvname(vgname, lvname), /* copy */
*lvm_system_dir_env = _construct_lvm_system_dir_env(sysdir); /* copy */
struct lvmpolld_lv tmp = {
.ls = ls,
.type = type,
.lvmpolld_id = lvmpolld_id,
.lvid = _get_lvid(lvmpolld_id, sysdir),
.lvname = full_lvname,
.lvm_system_dir_env = lvm_system_dir_env,
.sinterval = dm_strdup(sinterval), /* copy */
.pdtimeout = pdtimeout < MIN_POLLING_TIMEOUT ? MIN_POLLING_TIMEOUT : pdtimeout,
.cmd_state = { .retcode = -1, .signal = 0 },
.pdst = pdst,
.init_rq_count = 1
}, *pdlv = (struct lvmpolld_lv *) dm_malloc(sizeof(struct lvmpolld_lv));
if (!pdlv || !tmp.lvid || !tmp.lvname || !tmp.lvm_system_dir_env || !tmp.sinterval)
goto err;
memcpy(pdlv, &tmp, sizeof(*pdlv));
if (pthread_mutex_init(&pdlv->lock, NULL))
goto err;
return pdlv;
err:
dm_free((void *)full_lvname);
dm_free((void *)lvmpolld_id);
dm_free((void *)lvm_system_dir_env);
dm_free((void *)tmp.sinterval);
dm_free((void *)pdlv);
return NULL;
}
void pdlv_destroy(struct lvmpolld_lv *pdlv)
{
dm_free((void *)pdlv->lvmpolld_id);
dm_free((void *)pdlv->lvname);
dm_free((void *)pdlv->sinterval);
dm_free((void *)pdlv->lvm_system_dir_env);
dm_free((void *)pdlv->cmdargv);
dm_free((void *)pdlv->cmdenvp);
pthread_mutex_destroy(&pdlv->lock);
dm_free((void *)pdlv);
}
unsigned pdlv_get_polling_finished(struct lvmpolld_lv *pdlv)
{
unsigned ret;
pdlv_lock(pdlv);
ret = pdlv->polling_finished;
pdlv_unlock(pdlv);
return ret;
}
struct lvmpolld_lv_state pdlv_get_status(struct lvmpolld_lv *pdlv)
{
struct lvmpolld_lv_state r;
pdlv_lock(pdlv);
r.error = pdlv_locked_error(pdlv);
r.polling_finished = pdlv_locked_polling_finished(pdlv);
r.cmd_state = pdlv_locked_cmd_state(pdlv);
pdlv_unlock(pdlv);
return r;
}
void pdlv_set_cmd_state(struct lvmpolld_lv *pdlv, const struct lvmpolld_cmd_stat *cmd_state)
{
pdlv_lock(pdlv);
pdlv->cmd_state = *cmd_state;
pdlv_unlock(pdlv);
}
void pdlv_set_error(struct lvmpolld_lv *pdlv, unsigned error)
{
pdlv_lock(pdlv);
pdlv->error = error;
pdlv_unlock(pdlv);
}
void pdlv_set_polling_finished(struct lvmpolld_lv *pdlv, unsigned finished)
{
pdlv_lock(pdlv);
pdlv->polling_finished = finished;
pdlv_unlock(pdlv);
}
struct lvmpolld_store *pdst_init(const char *name)
{
struct lvmpolld_store *pdst = (struct lvmpolld_store *) dm_malloc(sizeof(struct lvmpolld_store));
if (!pdst)
return NULL;
pdst->store = dm_hash_create(32);
if (!pdst->store)
goto err_hash;
if (pthread_mutex_init(&pdst->lock, NULL))
goto err_mutex;
pdst->name = name;
pdst->active_polling_count = 0;
return pdst;
err_mutex:
dm_hash_destroy(pdst->store);
err_hash:
dm_free(pdst);
return NULL;
}
void pdst_destroy(struct lvmpolld_store *pdst)
{
if (!pdst)
return;
dm_hash_destroy(pdst->store);
pthread_mutex_destroy(&pdst->lock);
dm_free(pdst);
}
void pdst_locked_lock_all_pdlvs(const struct lvmpolld_store *pdst)
{
struct dm_hash_node *n;
dm_hash_iterate(n, pdst->store)
pdlv_lock(dm_hash_get_data(pdst->store, n));
}
void pdst_locked_unlock_all_pdlvs(const struct lvmpolld_store *pdst)
{
struct dm_hash_node *n;
dm_hash_iterate(n, pdst->store)
pdlv_unlock(dm_hash_get_data(pdst->store, n));
}
static void _pdlv_locked_dump(struct buffer *buff, const struct lvmpolld_lv *pdlv)
{
char tmp[1024];
const struct lvmpolld_cmd_stat *cmd_state = &pdlv->cmd_state;
/* pdlv-section { */
if (dm_snprintf(tmp, sizeof(tmp), "\t%s {\n", pdlv->lvmpolld_id) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvid=\"%s\"\n", pdlv->lvid) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\ttype=\"%s\"\n", polling_op(pdlv->type)) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvname=\"%s\"\n", pdlv->lvname) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvmpolld_internal_timeout=%d\n", pdlv->pdtimeout) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvm_command_interval=\"%s\"\n", pdlv->sinterval ?: "<undefined>") > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tLVM_SYSTEM_DIR=\"%s\"\n",
(*pdlv->lvm_system_dir_env ? (pdlv->lvm_system_dir_env + strlen("LVM_SYSTEM_DIR=")) : "<undefined>")) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvm_command_pid=%d\n", pdlv->cmd_pid) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tpolling_finished=%d\n", pdlv->polling_finished) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\terror_occured=%d\n", pdlv->error) > 0)
buffer_append(buff, tmp);
if (dm_snprintf(tmp, sizeof(tmp), "\t\tinit_requests_count=%d\n", pdlv->init_rq_count) > 0)
buffer_append(buff, tmp);
/* lvm_commmand-section { */
buffer_append(buff, "\t\tlvm_command {\n");
if (cmd_state->retcode == -1 && !cmd_state->signal)
buffer_append(buff, "\t\t\tstate=\"" LVMPD_RESP_IN_PROGRESS "\"\n");
else {
buffer_append(buff, "\t\t\tstate=\"" LVMPD_RESP_FINISHED "\"\n");
if (dm_snprintf(tmp, sizeof(tmp), "\t\t\treason=\"%s\"\n\t\t\tvalue=%d\n",
(cmd_state->signal ? LVMPD_REAS_SIGNAL : LVMPD_REAS_RETCODE),
(cmd_state->signal ?: cmd_state->retcode)) > 0)
buffer_append(buff, tmp);
}
buffer_append(buff, "\t\t}\n");
/* } lvm_commmand-section */
buffer_append(buff, "\t}\n");
/* } pdlv-section */
}
void pdst_locked_dump(const struct lvmpolld_store *pdst, struct buffer *buff)
{
struct dm_hash_node *n;
dm_hash_iterate(n, pdst->store)
_pdlv_locked_dump(buff, dm_hash_get_data(pdst->store, n));
}
void pdst_locked_send_cancel(const struct lvmpolld_store *pdst)
{
struct lvmpolld_lv *pdlv;
struct dm_hash_node *n;
dm_hash_iterate(n, pdst->store) {
pdlv = dm_hash_get_data(pdst->store, n);
if (!pdlv_locked_polling_finished(pdlv))
pthread_cancel(pdlv->tid);
}
}
void pdst_locked_destroy_all_pdlvs(const struct lvmpolld_store *pdst)
{
struct dm_hash_node *n;
dm_hash_iterate(n, pdst->store)
pdlv_destroy(dm_hash_get_data(pdst->store, n));
}
struct lvmpolld_thread_data *lvmpolld_thread_data_constructor(struct lvmpolld_lv *pdlv)
{
struct lvmpolld_thread_data *data = (struct lvmpolld_thread_data *) dm_malloc(sizeof(struct lvmpolld_thread_data));
if (!data)
return NULL;
data->pdlv = NULL;
data->line = NULL;
data->line_size = 0;
data->fout = data->ferr = NULL;
data->outpipe[0] = data->outpipe[1] = data->errpipe[0] = data->errpipe[1] = -1;
if (pipe(data->outpipe) || pipe(data->errpipe)) {
lvmpolld_thread_data_destroy(data);
return NULL;
}
if (fcntl(data->outpipe[0], F_SETFD, FD_CLOEXEC) ||
fcntl(data->outpipe[1], F_SETFD, FD_CLOEXEC) ||
fcntl(data->errpipe[0], F_SETFD, FD_CLOEXEC) ||
fcntl(data->errpipe[1], F_SETFD, FD_CLOEXEC)) {
lvmpolld_thread_data_destroy(data);
return NULL;
}
data->pdlv = pdlv;
return data;
}
void lvmpolld_thread_data_destroy(void *thread_private)
{
struct lvmpolld_thread_data *data = (struct lvmpolld_thread_data *) thread_private;
if (!data)
return;
if (data->pdlv) {
pdst_lock(data->pdlv->pdst);
/*
* FIXME: skip this step if lvmpolld is activated
* by systemd.
*/
if (!pdlv_get_polling_finished(data->pdlv))
kill(data->pdlv->cmd_pid, SIGTERM);
pdlv_set_polling_finished(data->pdlv, 1);
pdst_locked_dec(data->pdlv->pdst);
pdst_unlock(data->pdlv->pdst);
}
/* may get reallocated in getline(). dm_free must not be used */
free(data->line);
if (data->fout && !fclose(data->fout))
data->outpipe[0] = -1;
if (data->ferr && !fclose(data->ferr))
data->errpipe[0] = -1;
if (data->outpipe[0] >= 0)
(void) close(data->outpipe[0]);
if (data->outpipe[1] >= 0)
(void) close(data->outpipe[1]);
if (data->errpipe[0] >= 0)
(void) close(data->errpipe[0]);
if (data->errpipe[1] >= 0)
(void) close(data->errpipe[1]);
dm_free(data);
}

View File

@@ -0,0 +1,215 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LVM_LVMPOLLD_DATA_UTILS_H
#define _LVM_LVMPOLLD_DATA_UTILS_H
#include <pthread.h>
struct buffer;
struct lvmpolld_state;
enum poll_type {
PVMOVE = 0,
CONVERT,
MERGE,
MERGE_THIN,
POLL_TYPE_MAX
};
struct lvmpolld_cmd_stat {
int retcode;
int signal;
};
struct lvmpolld_store {
pthread_mutex_t lock;
void *store;
const char *name;
unsigned active_polling_count;
};
struct lvmpolld_lv {
/*
* accessing following vars doesn't
* require struct lvmpolld_lv lock
*/
struct lvmpolld_state *const ls;
const enum poll_type type;
const char *const lvid;
const char *const lvmpolld_id;
const char *const lvname; /* full vg/lv name */
const unsigned pdtimeout; /* in seconds */
const char *const sinterval;
const char *const lvm_system_dir_env;
struct lvmpolld_store *const pdst;
const char *const *cmdargv;
const char *const *cmdenvp;
/* only used by write */
pid_t cmd_pid;
pthread_t tid;
pthread_mutex_t lock;
/* block of shared variables protected by lock */
struct lvmpolld_cmd_stat cmd_state;
unsigned init_rq_count; /* for debuging purposes only */
unsigned polling_finished:1; /* no more updates */
unsigned error:1; /* unrecoverable error occured in lvmpolld */
};
typedef void (*lvmpolld_parse_output_fn_t) (struct lvmpolld_lv *pdlv, const char *line);
/* TODO: replace with configuration option */
#define MIN_POLLING_TIMEOUT 60
struct lvmpolld_lv_state {
unsigned error:1;
unsigned polling_finished:1;
struct lvmpolld_cmd_stat cmd_state;
};
struct lvmpolld_thread_data {
char *line;
size_t line_size;
int outpipe[2];
int errpipe[2];
FILE *fout;
FILE *ferr;
char buf[1024];
struct lvmpolld_lv *pdlv;
};
char *construct_id(const char *sysdir, const char *lvid);
/* LVMPOLLD_LV_T section */
/* only call with appropriate struct lvmpolld_store lock held */
struct lvmpolld_lv *pdlv_create(struct lvmpolld_state *ls, const char *id,
const char *vgname, const char *lvname,
const char *sysdir, enum poll_type type,
const char *sinterval, unsigned pdtimeout,
struct lvmpolld_store *pdst);
/* only call with appropriate struct lvmpolld_store lock held */
void pdlv_destroy(struct lvmpolld_lv *pdlv);
static inline void pdlv_lock(struct lvmpolld_lv *pdlv)
{
pthread_mutex_lock(&pdlv->lock);
}
static inline void pdlv_unlock(struct lvmpolld_lv *pdlv)
{
pthread_mutex_unlock(&pdlv->lock);
}
/*
* no struct lvmpolld_lv lock required section
*/
static inline int pdlv_is_type(const struct lvmpolld_lv *pdlv, enum poll_type type)
{
return pdlv->type == type;
}
static inline unsigned pdlv_get_timeout(const struct lvmpolld_lv *pdlv)
{
return pdlv->pdtimeout;
}
static inline enum poll_type pdlv_get_type(const struct lvmpolld_lv *pdlv)
{
return pdlv->type;
}
unsigned pdlv_get_polling_finished(struct lvmpolld_lv *pdlv);
struct lvmpolld_lv_state pdlv_get_status(struct lvmpolld_lv *pdlv);
void pdlv_set_cmd_state(struct lvmpolld_lv *pdlv, const struct lvmpolld_cmd_stat *cmd_state);
void pdlv_set_error(struct lvmpolld_lv *pdlv, unsigned error);
void pdlv_set_polling_finished(struct lvmpolld_lv *pdlv, unsigned finished);
/*
* struct lvmpolld_lv lock required section
*/
static inline struct lvmpolld_cmd_stat pdlv_locked_cmd_state(const struct lvmpolld_lv *pdlv)
{
return pdlv->cmd_state;
}
static inline int pdlv_locked_polling_finished(const struct lvmpolld_lv *pdlv)
{
return pdlv->polling_finished;
}
static inline unsigned pdlv_locked_error(const struct lvmpolld_lv *pdlv)
{
return pdlv->error;
}
/* struct lvmpolld_store manipulation routines */
struct lvmpolld_store *pdst_init(const char *name);
void pdst_destroy(struct lvmpolld_store *pdst);
void pdst_locked_dump(const struct lvmpolld_store *pdst, struct buffer *buff);
void pdst_locked_lock_all_pdlvs(const struct lvmpolld_store *pdst);
void pdst_locked_unlock_all_pdlvs(const struct lvmpolld_store *pdst);
void pdst_locked_destroy_all_pdlvs(const struct lvmpolld_store *pdst);
void pdst_locked_send_cancel(const struct lvmpolld_store *pdst);
static inline void pdst_lock(struct lvmpolld_store *pdst)
{
pthread_mutex_lock(&pdst->lock);
}
static inline void pdst_unlock(struct lvmpolld_store *pdst)
{
pthread_mutex_unlock(&pdst->lock);
}
static inline void pdst_locked_inc(struct lvmpolld_store *pdst)
{
pdst->active_polling_count++;
}
static inline void pdst_locked_dec(struct lvmpolld_store *pdst)
{
pdst->active_polling_count--;
}
static inline unsigned pdst_locked_get_active_count(const struct lvmpolld_store *pdst)
{
return pdst->active_polling_count;
}
static inline int pdst_locked_insert(struct lvmpolld_store *pdst, const char *key, struct lvmpolld_lv *pdlv)
{
return dm_hash_insert(pdst->store, key, pdlv);
}
static inline struct lvmpolld_lv *pdst_locked_lookup(struct lvmpolld_store *pdst, const char *key)
{
return dm_hash_lookup(pdst->store, key);
}
static inline void pdst_locked_remove(struct lvmpolld_store *pdst, const char *key)
{
dm_hash_remove(pdst->store, key);
}
struct lvmpolld_thread_data *lvmpolld_thread_data_constructor(struct lvmpolld_lv *pdlv);
void lvmpolld_thread_data_destroy(void *thread_private);
#endif /* _LVM_LVMPOLLD_DATA_UTILS_H */

View File

@@ -0,0 +1,52 @@
/*
* Copyright (C) 2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LVM_LVMPOLLD_PROTOCOL_H
#define _LVM_LVMPOLLD_PROTOCOL_H
#include "polling_ops.h"
#define LVMPOLLD_PROTOCOL "lvmpolld"
#define LVMPOLLD_PROTOCOL_VERSION 1
#define LVMPD_REQ_CONVERT CONVERT_POLL
#define LVMPD_REQ_DUMP "dump"
#define LVMPD_REQ_MERGE MERGE_POLL
#define LVMPD_REQ_MERGE_THIN MERGE_THIN_POLL
#define LVMPD_REQ_PROGRESS "progress_info"
#define LVMPD_REQ_PVMOVE PVMOVE_POLL
#define LVMPD_PARM_ABORT "abort"
#define LVMPD_PARM_HANDLE_MISSING_PVS "handle_missing_pvs"
#define LVMPD_PARM_INTERVAL "interval"
#define LVMPD_PARM_LVID "lvid"
#define LVMPD_PARM_LVNAME "lvname"
#define LVMPD_PARM_SYSDIR "sysdir"
#define LVMPD_PARM_VALUE "value" /* either retcode or signal value */
#define LVMPD_PARM_VGNAME "vgname"
#define LVMPD_RESP_FAILED "failed"
#define LVMPD_RESP_FINISHED "finished"
#define LVMPD_RESP_IN_PROGRESS "in_progress"
#define LVMPD_RESP_EINVAL "invalid"
#define LVMPD_RESP_NOT_FOUND "not_found"
#define LVMPD_RESP_OK "OK"
#define LVMPD_REAS_RETCODE "retcode" /* lvm cmd ret code */
#define LVMPD_REAS_SIGNAL "signal" /* lvm cmd terminating singal */
#define LVMPD_RET_DUP_FAILED 100
#define LVMPD_RET_EXC_FAILED 101
#endif /* _LVM_LVMPOLLD_PROTOCOL_H */

View File

@@ -0,0 +1,25 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LVM_TOOL_POLLING_OPS_H
#define _LVM_TOOL_POLLING_OPS_H
/* this file is also part of lvmpolld protocol */
#define PVMOVE_POLL "pvmove"
#define CONVERT_POLL "convert"
#define MERGE_POLL "merge"
#define MERGE_THIN_POLL "merge_thin"
#endif /* _LVM_TOOL_POLLING_OPS_H */

View File

@@ -30,28 +30,48 @@ multiqueue
This policy is the default.
The multiqueue policy has two sets of 16 queues: one set for entries
waiting for the cache and another one for those in the cache.
The multiqueue policy has three sets of 16 queues: one set for entries
waiting for the cache and another two for those in the cache (a set for
clean entries and a set for dirty entries).
Cache entries in the queues are aged based on logical time. Entry into
the cache is based on variable thresholds and queue selection is based
on hit count on entry. The policy aims to take different cache miss
costs into account and to adjust to varying load patterns automatically.
Message and constructor argument pairs are:
'sequential_threshold <#nr_sequential_ios>' and
'random_threshold <#nr_random_ios>'.
'sequential_threshold <#nr_sequential_ios>'
'random_threshold <#nr_random_ios>'
'read_promote_adjustment <value>'
'write_promote_adjustment <value>'
'discard_promote_adjustment <value>'
The sequential threshold indicates the number of contiguous I/Os
required before a stream is treated as sequential. The random threshold
required before a stream is treated as sequential. Once a stream is
considered sequential it will bypass the cache. The random threshold
is the number of intervening non-contiguous I/Os that must be seen
before the stream is treated as random again.
The sequential and random thresholds default to 512 and 4 respectively.
Large, sequential ios are probably better left on the origin device
since spindles tend to have good bandwidth. The io_tracker counts
contiguous I/Os to try to spot when the io is in one of these sequential
modes.
Large, sequential I/Os are probably better left on the origin device
since spindles tend to have good sequential I/O bandwidth. The
io_tracker counts contiguous I/Os to try to spot when the I/O is in one
of these sequential modes. But there are use-cases for wanting to
promote sequential blocks to the cache (e.g. fast application startup).
If sequential threshold is set to 0 the sequential I/O detection is
disabled and sequential I/O will no longer implicitly bypass the cache.
Setting the random threshold to 0 does _not_ disable the random I/O
stream detection.
Internally the mq policy determines a promotion threshold. If the hit
count of a block not in the cache goes above this threshold it gets
promoted to the cache. The read, write and discard promote adjustment
tunables allow you to tweak the promotion threshold by adding a small
value based on the io type. They default to 4, 8 and 1 respectively.
If you're trying to quickly warm a new cache device you may wish to
reduce these to encourage promotion. Remember to switch them back to
their defaults after the cache fills though.
cleaner
-------

View File

@@ -50,14 +50,16 @@ other parameters detailed later):
which are dirty, and extra hints for use by the policy object.
This information could be put on the cache device, but having it
separate allows the volume manager to configure it differently,
e.g. as a mirror for extra robustness.
e.g. as a mirror for extra robustness. This metadata device may only
be used by a single cache device.
Fixed block size
----------------
The origin is divided up into blocks of a fixed size. This block size
is configurable when you first create the cache. Typically we've been
using block sizes of 256k - 1024k.
using block sizes of 256KB - 1024KB. The block size must be between 64
(32KB) and 2097152 (1GB) and a multiple of 64 (32KB).
Having a fixed block size simplifies the target a lot. But it is
something of a compromise. For instance, a small part of a block may be
@@ -66,10 +68,11 @@ So large block sizes are bad because they waste cache space. And small
block sizes are bad because they increase the amount of metadata (both
in core and on disk).
Writeback/writethrough
----------------------
Cache operating modes
---------------------
The cache has two modes, writeback and writethrough.
The cache has three operating modes: writeback, writethrough and
passthrough.
If writeback, the default, is selected then a write to a block that is
cached will go only to the cache and the block will be marked dirty in
@@ -79,15 +82,38 @@ If writethrough is selected then a write to a cached block will not
complete until it has hit both the origin and cache devices. Clean
blocks should remain clean.
If passthrough is selected, useful when the cache contents are not known
to be coherent with the origin device, then all reads are served from
the origin device (all reads miss the cache) and all writes are
forwarded to the origin device; additionally, write hits cause cache
block invalidates. To enable passthrough mode the cache must be clean.
Passthrough mode allows a cache device to be activated without having to
worry about coherency. Coherency that exists is maintained, although
the cache will gradually cool as writes take place. If the coherency of
the cache can later be verified, or established through use of the
"invalidate_cblocks" message, the cache device can be transitioned to
writethrough or writeback mode while still warm. Otherwise, the cache
contents can be discarded prior to transitioning to the desired
operating mode.
A simple cleaner policy is provided, which will clean (write back) all
dirty blocks in a cache. Useful for decommissioning a cache.
dirty blocks in a cache. Useful for decommissioning a cache or when
shrinking a cache. Shrinking the cache's fast device requires all cache
blocks, in the area of the cache being removed, to be clean. If the
area being removed from the cache still contains dirty blocks the resize
will fail. Care must be taken to never reduce the volume used for the
cache's fast device until the cache is clean. This is of particular
importance if writeback mode is used. Writethrough and passthrough
modes already maintain a clean cache. Future support to partially clean
the cache, above a specified threshold, will allow for keeping the cache
warm and in writeback mode during resize.
Migration throttling
--------------------
Migrating data between the origin and cache device uses bandwidth.
The user can set a throttle to prevent more than a certain amount of
migration occuring at any one time. Currently we're not taking any
migration occurring at any one time. Currently we're not taking any
account of normal io traffic going to the devices. More work needs
doing here to avoid migrating during those peak io moments.
@@ -98,12 +124,11 @@ the default being 204800 sectors (or 100MB).
Updating on-disk metadata
-------------------------
On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
written. If no such requests are made then commits will occur every
second. This means the cache behaves like a physical disk that has a
write cache (the same is true of the thin-provisioning target). If
power is lost you may lose some recent writes. The metadata should
always be consistent in spite of any crash.
On-disk metadata is committed every time a FLUSH or FUA bio is written.
If no such requests are made then commits will occur every second. This
means the cache behaves like a physical disk that has a volatile write
cache. If power is lost you may lose some recent writes. The metadata
should always be consistent in spite of any crash.
The 'dirty' state for a cache block changes far too frequently for us
to keep updating it on the fly. So we treat it as a hint. In normal
@@ -159,7 +184,7 @@ Constructor
block size : cache unit size in sectors
#feature args : number of feature arguments passed
feature args : writethrough. (The default is writeback.)
feature args : writethrough or passthrough (The default is writeback.)
policy : the replacement policy to use
#policy args : an even number of arguments corresponding to
@@ -175,6 +200,13 @@ Optional feature arguments are:
back cache block contents later for performance reasons,
so they may differ from the corresponding origin blocks.
passthrough : a degraded mode useful for various cache coherency
situations (e.g., rolling back snapshots of
underlying storage). Reads and writes always go to
the origin. If a write goes to a cached origin
block, then the cache block is invalidated.
To enable passthrough mode the cache must be clean.
A policy called 'default' is always registered. This is an alias for
the policy we currently think is giving best all round performance.
@@ -184,36 +216,43 @@ the characteristics of a specific policy, always request it by name.
Status
------
<#used metadata blocks>/<#total metadata blocks> <#read hits> <#read misses>
<#write hits> <#write misses> <#demotions> <#promotions> <#blocks in cache>
<#dirty> <#features> <features>* <#core args> <core args>* <#policy args>
<policy args>*
<metadata block size> <#used metadata blocks>/<#total metadata blocks>
<cache block size> <#used cache blocks>/<#total cache blocks>
<#read hits> <#read misses> <#write hits> <#write misses>
<#demotions> <#promotions> <#dirty> <#features> <features>*
<#core args> <core args>* <policy name> <#policy args> <policy args>*
#used metadata blocks : Number of metadata blocks used
#total metadata blocks : Total number of metadata blocks
#read hits : Number of times a READ bio has been mapped
metadata block size : Fixed block size for each metadata block in
sectors
#used metadata blocks : Number of metadata blocks used
#total metadata blocks : Total number of metadata blocks
cache block size : Configurable block size for the cache device
in sectors
#used cache blocks : Number of blocks resident in the cache
#total cache blocks : Total number of cache blocks
#read hits : Number of times a READ bio has been mapped
to the cache
#read misses : Number of times a READ bio has been mapped
#read misses : Number of times a READ bio has been mapped
to the origin
#write hits : Number of times a WRITE bio has been mapped
#write hits : Number of times a WRITE bio has been mapped
to the cache
#write misses : Number of times a WRITE bio has been
#write misses : Number of times a WRITE bio has been
mapped to the origin
#demotions : Number of times a block has been removed
#demotions : Number of times a block has been removed
from the cache
#promotions : Number of times a block has been moved to
#promotions : Number of times a block has been moved to
the cache
#blocks in cache : Number of blocks resident in the cache
#dirty : Number of blocks in the cache that differ
#dirty : Number of blocks in the cache that differ
from the origin
#feature args : Number of feature args to follow
feature args : 'writethrough' (optional)
#core args : Number of core arguments (must be even)
core args : Key/value pairs for tuning the core
#feature args : Number of feature args to follow
feature args : 'writethrough' (optional)
#core args : Number of core arguments (must be even)
core args : Key/value pairs for tuning the core
e.g. migration_threshold
#policy args : Number of policy arguments to follow (must be even)
policy args : Key/value pairs
e.g. 'sequential_threshold 1024
policy name : Name of the policy
#policy args : Number of policy arguments to follow (must be even)
policy args : Key/value pairs
e.g. sequential_threshold
Messages
--------
@@ -229,12 +268,28 @@ The message format is:
E.g.
dmsetup message my_cache 0 sequential_threshold 1024
Invalidation is removing an entry from the cache without writing it
back. Cache blocks can be invalidated via the invalidate_cblocks
message, which takes an arbitrary number of cblock ranges. Each cblock
range's end value is "one past the end", meaning 5-10 expresses a range
of values from 5 to 9. Each cblock must be expressed as a decimal
value, in the future a variant message that takes cblock ranges
expressed in hexidecimal may be needed to better support efficient
invalidation of larger caches. The cache must be in passthrough mode
when invalidate_cblocks is used.
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
E.g.
dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
Examples
========
The test suite can be found here:
https://github.com/jthornber/thinp-test-suite
https://github.com/jthornber/device-mapper-test-suite
dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'

View File

@@ -4,12 +4,15 @@ dm-crypt
Device-Mapper's "crypt" target provides transparent encryption of block devices
using the kernel crypto API.
For a more detailed description of supported parameters see:
https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt
Parameters: <cipher> <key> <iv_offset> <device path> \
<offset> [<#opt_params> <opt_params>]
<cipher>
Encryption cipher and an optional IV generation mode.
(In format cipher[:keycount]-chainmode-ivopts:ivmode).
(In format cipher[:keycount]-chainmode-ivmode[:ivopts]).
Examples:
des
aes-cbc-essiv:sha256
@@ -19,7 +22,11 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
<key>
Key used for encryption. It is encoded as a hexadecimal number.
You can only use key sizes that are valid for the selected cipher.
You can only use key sizes that are valid for the selected cipher
in combination with the selected iv mode.
Note that for some iv modes the key string can contain additional
keys (for example IV seed) so the key contains more parts concatenated
into a single string.
<keycount>
Multi-key compatibility mode. You can define <keycount> keys and
@@ -44,7 +51,7 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
Otherwise #opt_params is the number of following arguments.
Example of optional parameters section:
1 allow_discards
3 allow_discards same_cpu_crypt submit_from_crypt_cpus
allow_discards
Block discard requests (a.k.a. TRIM) are passed through the crypt device.
@@ -56,11 +63,24 @@ allow_discards
used space etc.) if the discarded blocks can be located easily on the
device later.
same_cpu_crypt
Perform encryption using the same cpu that IO was submitted on.
The default is to use an unbound workqueue so that encryption work
is automatically balanced between available CPUs.
submit_from_crypt_cpus
Disable offloading writes to a separate thread after encryption.
There are some situations where offloading write bios from the
encryption threads to a single thread degrades performance
significantly. The default is to offload write bios to the same
thread because it benefits CFQ to have writes submitted using the
same context.
Example scripts
===============
LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
encryption with dm-crypt using the 'cryptsetup' utility, see
http://code.google.com/p/cryptsetup/
https://gitlab.com/cryptsetup/cryptsetup
[[
#!/bin/sh

108
doc/kernel/era.txt Normal file
View File

@@ -0,0 +1,108 @@
Introduction
============
dm-era is a target that behaves similar to the linear target. In
addition it keeps track of which blocks were written within a user
defined period of time called an 'era'. Each era target instance
maintains the current era as a monotonically increasing 32-bit
counter.
Use cases include tracking changed blocks for backup software, and
partially invalidating the contents of a cache to restore cache
coherency after rolling back a vendor snapshot.
Constructor
===========
era <metadata dev> <origin dev> <block size>
metadata dev : fast device holding the persistent metadata
origin dev : device holding data blocks that may change
block size : block size of origin data device, granularity that is
tracked by the target
Messages
========
None of the dm messages take any arguments.
checkpoint
----------
Possibly move to a new era. You shouldn't assume the era has
incremented. After sending this message, you should check the
current era via the status line.
take_metadata_snap
------------------
Create a clone of the metadata, to allow a userland process to read it.
drop_metadata_snap
------------------
Drop the metadata snapshot.
Status
======
<metadata block size> <#used metadata blocks>/<#total metadata blocks>
<current era> <held metadata root | '-'>
metadata block size : Fixed block size for each metadata block in
sectors
#used metadata blocks : Number of metadata blocks used
#total metadata blocks : Total number of metadata blocks
current era : The current era
held metadata root : The location, in blocks, of the metadata root
that has been 'held' for userspace read
access. '-' indicates there is no held root
Detailed use case
=================
The scenario of invalidating a cache when rolling back a vendor
snapshot was the primary use case when developing this target:
Taking a vendor snapshot
------------------------
- Send a checkpoint message to the era target
- Make a note of the current era in its status line
- Take vendor snapshot (the era and snapshot should be forever
associated now).
Rolling back to an vendor snapshot
----------------------------------
- Cache enters passthrough mode (see: dm-cache's docs in cache.txt)
- Rollback vendor storage
- Take metadata snapshot
- Ascertain which blocks have been written since the snapshot was taken
by checking each block's era
- Invalidate those blocks in the caching software
- Cache returns to writeback/writethrough mode
Memory usage
============
The target uses a bitset to record writes in the current era. It also
has a spare bitset ready for switching over to a new era. Other than
that it uses a few 4k blocks for updating metadata.
(4 * nr_blocks) bytes + buffers
Resilience
==========
Metadata is updated on disk before a write to a previously unwritten
block is performed. As such dm-era should not be effected by a hard
crash such as power failure.
Userland tools
==============
Userland tools are found in the increasingly poorly named
thin-provisioning-tools project:
https://github.com/jthornber/thin-provisioning-tools

140
doc/kernel/log-writes.txt Normal file
View File

@@ -0,0 +1,140 @@
dm-log-writes
=============
This target takes 2 devices, one to pass all IO to normally, and one to log all
of the write operations to. This is intended for file system developers wishing
to verify the integrity of metadata or data as the file system is written to.
There is a log_write_entry written for every WRITE request and the target is
able to take arbitrary data from userspace to insert into the log. The data
that is in the WRITE requests is copied into the log to make the replay happen
exactly as it happened originally.
Log Ordering
============
We log things in order of completion once we are sure the write is no longer in
cache. This means that normal WRITE requests are not actually logged until the
next REQ_FLUSH request. This is to make it easier for userspace to replay the
log in a way that correlates to what is on disk and not what is in cache, to
make it easier to detect improper waiting/flushing.
This works by attaching all WRITE requests to a list once the write completes.
Once we see a REQ_FLUSH request we splice this list onto the request and once
the FLUSH request completes we log all of the WRITEs and then the FLUSH. Only
completed WRITEs, at the time the REQ_FLUSH is issued, are added in order to
simulate the worst case scenario with regard to power failures. Consider the
following example (W means write, C means complete):
W1,W2,W3,C3,C2,Wflush,C1,Cflush
The log would show the following
W3,W2,flush,W1....
Again this is to simulate what is actually on disk, this allows us to detect
cases where a power failure at a particular point in time would create an
inconsistent file system.
Any REQ_FUA requests bypass this flushing mechanism and are logged as soon as
they complete as those requests will obviously bypass the device cache.
Any REQ_DISCARD requests are treated like WRITE requests. Otherwise we would
have all the DISCARD requests, and then the WRITE requests and then the FLUSH
request. Consider the following example:
WRITE block 1, DISCARD block 1, FLUSH
If we logged DISCARD when it completed, the replay would look like this
DISCARD 1, WRITE 1, FLUSH
which isn't quite what happened and wouldn't be caught during the log replay.
Target interface
================
i) Constructor
log-writes <dev_path> <log_dev_path>
dev_path : Device that all of the IO will go to normally.
log_dev_path : Device where the log entries are written to.
ii) Status
<#logged entries> <highest allocated sector>
#logged entries : Number of logged entries
highest allocated sector : Highest allocated sector
iii) Messages
mark <description>
You can use a dmsetup message to set an arbitrary mark in a log.
For example say you want to fsck a file system after every
write, but first you need to replay up to the mkfs to make sure
we're fsck'ing something reasonable, you would do something like
this:
mkfs.btrfs -f /dev/mapper/log
dmsetup message log 0 mark mkfs
<run test>
This would allow you to replay the log up to the mkfs mark and
then replay from that point on doing the fsck check in the
interval that you want.
Every log has a mark at the end labeled "dm-log-writes-end".
Userspace component
===================
There is a userspace tool that will replay the log for you in various ways.
It can be found here: https://github.com/josefbacik/log-writes
Example usage
=============
Say you want to test fsync on your file system. You would do something like
this:
TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
dmsetup create log --table "$TABLE"
mkfs.btrfs -f /dev/mapper/log
dmsetup message log 0 mark mkfs
mount /dev/mapper/log /mnt/btrfs-test
<some test that does fsync at the end>
dmsetup message log 0 mark fsync
md5sum /mnt/btrfs-test/foo
umount /mnt/btrfs-test
dmsetup remove log
replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync
mount /dev/sdb /mnt/btrfs-test
md5sum /mnt/btrfs-test/foo
<verify md5sum's are correct>
Another option is to do a complicated file system operation and verify the file
system is consistent during the entire operation. You could do this with:
TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
dmsetup create log --table "$TABLE"
mkfs.btrfs -f /dev/mapper/log
dmsetup message log 0 mark mkfs
mount /dev/mapper/log /mnt/btrfs-test
<fsstress to dirty the fs>
btrfs filesystem balance /mnt/btrfs-test
umount /mnt/btrfs-test
dmsetup remove log
replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs
btrfsck /dev/sdb
replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \
--fsck "btrfsck /dev/sdb" --check fua
And that will replay the log until it sees a FUA request, run the fsck command
and if the fsck passes it will replay to the next FUA, until it is completed or
the fsck command exists abnormally.

View File

@@ -222,3 +222,5 @@ Version History
1.4.2 Add RAID10 "far" and "offset" algorithm support.
1.5.0 Add message interface to allow manipulation of the sync_action.
New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.
1.5.1 Add ability to restore transiently failed devices on resume.
1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check".

186
doc/kernel/statistics.txt Normal file
View File

@@ -0,0 +1,186 @@
DM statistics
=============
Device Mapper supports the collection of I/O statistics on user-defined
regions of a DM device. If no regions are defined no statistics are
collected so there isn't any performance impact. Only bio-based DM
devices are currently supported.
Each user-defined region specifies a starting sector, length and step.
Individual statistics will be collected for each step-sized area within
the range specified.
The I/O statistics counters for each step-sized area of a region are
in the same format as /sys/block/*/stat or /proc/diskstats (see:
Documentation/iostats.txt). But two extra counters (12 and 13) are
provided: total time spent reading and writing in milliseconds. All
these counters may be accessed by sending the @stats_print message to
the appropriate DM device via dmsetup.
Each region has a corresponding unique identifier, which we call a
region_id, that is assigned when the region is created. The region_id
must be supplied when querying statistics about the region, deleting the
region, etc. Unique region_ids enable multiple userspace programs to
request and process statistics for the same DM device without stepping
on each other's data.
The creation of DM statistics will allocate memory via kmalloc or
fallback to using vmalloc space. At most, 1/4 of the overall system
memory may be allocated by DM statistics. The admin can see how much
memory is used by reading
/sys/module/dm_mod/parameters/stats_current_allocated_bytes
Messages
========
@stats_create <range> <step> [<program_id> [<aux_data>]]
Create a new region and return the region_id.
<range>
"-" - whole device
"<start_sector>+<length>" - a range of <length> 512-byte sectors
starting with <start_sector>.
<step>
"<area_size>" - the range is subdivided into areas each containing
<area_size> sectors.
"/<number_of_areas>" - the range is subdivided into the specified
number of areas.
<program_id>
An optional parameter. A name that uniquely identifies
the userspace owner of the range. This groups ranges together
so that userspace programs can identify the ranges they
created and ignore those created by others.
The kernel returns this string back in the output of
@stats_list message, but it doesn't use it for anything else.
<aux_data>
An optional parameter. A word that provides auxiliary data
that is useful to the client program that created the range.
The kernel returns this string back in the output of
@stats_list message, but it doesn't use this value for anything.
@stats_delete <region_id>
Delete the region with the specified id.
<region_id>
region_id returned from @stats_create
@stats_clear <region_id>
Clear all the counters except the in-flight i/o counters.
<region_id>
region_id returned from @stats_create
@stats_list [<program_id>]
List all regions registered with @stats_create.
<program_id>
An optional parameter.
If this parameter is specified, only matching regions
are returned.
If it is not specified, all regions are returned.
Output format:
<region_id>: <start_sector>+<length> <step> <program_id> <aux_data>
@stats_print <region_id> [<starting_line> <number_of_lines>]
Print counters for each step-sized area of a region.
<region_id>
region_id returned from @stats_create
<starting_line>
The index of the starting line in the output.
If omitted, all lines are returned.
<number_of_lines>
The number of lines to include in the output.
If omitted, all lines are returned.
Output format for each step-sized area of a region:
<start_sector>+<length> counters
The first 11 counters have the same meaning as
/sys/block/*/stat or /proc/diskstats.
Please refer to Documentation/iostats.txt for details.
1. the number of reads completed
2. the number of reads merged
3. the number of sectors read
4. the number of milliseconds spent reading
5. the number of writes completed
6. the number of writes merged
7. the number of sectors written
8. the number of milliseconds spent writing
9. the number of I/Os currently in progress
10. the number of milliseconds spent doing I/Os
11. the weighted number of milliseconds spent doing I/Os
Additional counters:
12. the total time spent reading in milliseconds
13. the total time spent writing in milliseconds
@stats_print_clear <region_id> [<starting_line> <number_of_lines>]
Atomically print and then clear all the counters except the
in-flight i/o counters. Useful when the client consuming the
statistics does not want to lose any statistics (those updated
between printing and clearing).
<region_id>
region_id returned from @stats_create
<starting_line>
The index of the starting line in the output.
If omitted, all lines are printed and then cleared.
<number_of_lines>
The number of lines to process.
If omitted, all lines are printed and then cleared.
@stats_set_aux <region_id> <aux_data>
Store auxiliary data aux_data for the specified region.
<region_id>
region_id returned from @stats_create
<aux_data>
The string that identifies data which is useful to the client
program that created the range. The kernel returns this
string back in the output of @stats_list message, but it
doesn't use this value for anything.
Examples
========
Subdivide the DM device 'vol' into 100 pieces and start collecting
statistics on them:
dmsetup message vol 0 @stats_create - /100
Set the auxillary data string to "foo bar baz" (the escape for each
space must also be escaped, otherwise the shell will consume them):
dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz
List the statistics:
dmsetup message vol 0 @stats_list
Print the statistics:
dmsetup message vol 0 @stats_print 0
Delete the statistics:
dmsetup message vol 0 @stats_delete 0

138
doc/kernel/switch.txt Normal file
View File

@@ -0,0 +1,138 @@
dm-switch
=========
The device-mapper switch target creates a device that supports an
arbitrary mapping of fixed-size regions of I/O across a fixed set of
paths. The path used for any specific region can be switched
dynamically by sending the target a message.
It maps I/O to underlying block devices efficiently when there is a large
number of fixed-sized address regions but there is no simple pattern
that would allow for a compact representation of the mapping such as
dm-stripe.
Background
----------
Dell EqualLogic and some other iSCSI storage arrays use a distributed
frameless architecture. In this architecture, the storage group
consists of a number of distinct storage arrays ("members") each having
independent controllers, disk storage and network adapters. When a LUN
is created it is spread across multiple members. The details of the
spreading are hidden from initiators connected to this storage system.
The storage group exposes a single target discovery portal, no matter
how many members are being used. When iSCSI sessions are created, each
session is connected to an eth port on a single member. Data to a LUN
can be sent on any iSCSI session, and if the blocks being accessed are
stored on another member the I/O will be forwarded as required. This
forwarding is invisible to the initiator. The storage layout is also
dynamic, and the blocks stored on disk may be moved from member to
member as needed to balance the load.
This architecture simplifies the management and configuration of both
the storage group and initiators. In a multipathing configuration, it
is possible to set up multiple iSCSI sessions to use multiple network
interfaces on both the host and target to take advantage of the
increased network bandwidth. An initiator could use a simple round
robin algorithm to send I/O across all paths and let the storage array
members forward it as necessary, but there is a performance advantage to
sending data directly to the correct member.
A device-mapper table already lets you map different regions of a
device onto different targets. However in this architecture the LUN is
spread with an address region size on the order of 10s of MBs, which
means the resulting table could have more than a million entries and
consume far too much memory.
Using this device-mapper switch target we can now build a two-layer
device hierarchy:
Upper Tier - Determine which array member the I/O should be sent to.
Lower Tier - Load balance amongst paths to a particular member.
The lower tier consists of a single dm multipath device for each member.
Each of these multipath devices contains the set of paths directly to
the array member in one priority group, and leverages existing path
selectors to load balance amongst these paths. We also build a
non-preferred priority group containing paths to other array members for
failover reasons.
The upper tier consists of a single dm-switch device. This device uses
a bitmap to look up the location of the I/O and choose the appropriate
lower tier device to route the I/O. By using a bitmap we are able to
use 4 bits for each address range in a 16 member group (which is very
large for us). This is a much denser representation than the dm table
b-tree can achieve.
Construction Parameters
=======================
<num_paths> <region_size> <num_optional_args> [<optional_args>...]
[<dev_path> <offset>]+
<num_paths>
The number of paths across which to distribute the I/O.
<region_size>
The number of 512-byte sectors in a region. Each region can be redirected
to any of the available paths.
<num_optional_args>
The number of optional arguments. Currently, no optional arguments
are supported and so this must be zero.
<dev_path>
The block device that represents a specific path to the device.
<offset>
The offset of the start of data on the specific <dev_path> (in units
of 512-byte sectors). This number is added to the sector number when
forwarding the request to the specific path. Typically it is zero.
Messages
========
set_region_mappings <index>:<path_nr> [<index>]:<path_nr> [<index>]:<path_nr>...
Modify the region table by specifying which regions are redirected to
which paths.
<index>
The region number (region size was specified in constructor parameters).
If index is omitted, the next region (previous index + 1) is used.
Expressed in hexadecimal (WITHOUT any prefix like 0x).
<path_nr>
The path number in the range 0 ... (<num_paths> - 1).
Expressed in hexadecimal (WITHOUT any prefix like 0x).
R<n>,<m>
This parameter allows repetitive patterns to be loaded quickly. <n> and <m>
are hexadecimal numbers. The last <n> mappings are repeated in the next <m>
slots.
Status
======
No status line is reported.
Example
=======
Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with
the same size.
Create a switch device with 64kB region size:
dmsetup create switch --table "0 `blockdev --getsize /dev/vg1/switch0`
switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0"
Set mappings for the first 7 entries to point to devices switch0, switch1,
switch2, switch0, switch1, switch2, switch1:
dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1
Set repetitive mapping. This command:
dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10
is equivalent to:
dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \
:1 :2 :1 :2 :1 :2 :1 :2 :1 :2

View File

@@ -99,13 +99,14 @@ Using an existing pool device
$data_block_size $low_water_mark"
$data_block_size gives the smallest unit of disk space that can be
allocated at a time expressed in units of 512-byte sectors. People
primarily interested in thin provisioning may want to use a value such
as 1024 (512KB). People doing lots of snapshotting may want a smaller value
such as 128 (64KB). If you are not zeroing newly-allocated data,
a larger $data_block_size in the region of 256000 (128MB) is suggested.
$data_block_size must be the same for the lifetime of the
metadata device.
allocated at a time expressed in units of 512-byte sectors.
$data_block_size must be between 128 (64KB) and 2097152 (1GB) and a
multiple of 128 (64KB). $data_block_size cannot be changed after the
thin-pool is created. People primarily interested in thin provisioning
may want to use a value such as 1024 (512KB). People doing lots of
snapshotting may want a smaller value such as 128 (64KB). If you are
not zeroing newly-allocated data, a larger $data_block_size in the
region of 256000 (128MB) is suggested.
$low_water_mark is expressed in blocks of size $data_block_size. If
free space on the data device drops below this level then a dm event
@@ -115,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
userspace daemon can use this to detect a situation where a new table
already exceeds the threshold.
A low water mark for the metadata device is maintained in the kernel and
will trigger a dm event if free space on the metadata device drops below
it.
Updating on-disk metadata
-------------------------
On-disk metadata is committed every time a FLUSH or FUA bio is written.
If no such requests are made then commits will occur every second. This
means the thin-provisioning target behaves like a physical disk that has
a volatile write cache. If power is lost you may lose some recent
writes. The metadata should always be consistent in spite of any crash.
If data space is exhausted the pool will either error or queue IO
according to the configuration (see: error_if_no_space). If metadata
space is exhausted or a metadata operation fails: the pool will error IO
until the pool is taken offline and repair is performed to 1) fix any
potential inconsistencies and 2) clear the flag that imposes repair.
Once the pool's metadata device is repaired it may be resized, which
will allow the pool to return to normal operation. Note that if a pool
is flagged as needing repair, the pool's data and metadata devices
cannot be resized until repair is performed. It should also be noted
that when the pool's metadata space is exhausted the current metadata
transaction is aborted. Given that the pool will cache IO whose
completion may have already been acknowledged to upper IO layers
(e.g. filesystem) it is strongly suggested that consistency checks
(e.g. fsck) be performed on those layers when repair of the pool is
required.
Thin provisioning
-----------------
@@ -234,6 +264,8 @@ i) Constructor
read_only: Don't allow any changes to be made to the pool
metadata.
error_if_no_space: Error IOs, instead of queueing, if no space.
Data block size must be between 64KB (128 sectors) and 1GB
(2097152 sectors) inclusive.
@@ -255,10 +287,9 @@ ii) Status
should register for the event and then check the target's status.
held metadata root:
The location, in sectors, of the metadata root that has been
The location, in blocks, of the metadata root that has been
'held' for userspace read access. '-' indicates there is no
held root. This feature is not yet implemented so '-' is
always returned.
held root.
discard_passdown|no_discard_passdown
Whether or not discards are actually being passed down to the
@@ -275,6 +306,14 @@ ii) Status
contain the string 'Fail'. The userspace recovery tools
should then be used.
error_if_no_space|queue_if_no_space
If the pool runs out of data or metadata space, the pool will
either queue or error the IO destined to the data device. The
default is to queue the IO until more space is added or the
'no_space_timeout' expires. The 'no_space_timeout' dm-thin-pool
module parameter can be used to change this timeout -- it
defaults to 60 seconds but may be disabled using a value of 0.
iii) Messages
create_thin <dev id>
@@ -341,9 +380,6 @@ then you'll have no access to blocks mapped beyond the end. If you
load a target that is bigger than before, then extra blocks will be
provisioned as and when needed.
If you wish to reduce the size of your thin device and potentially
regain some space then send the 'trim' message to the pool.
ii) Status
<nr mapped sectors> <highest mapped sector>

View File

@@ -11,6 +11,7 @@ Construction Parameters
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
[<#opt_params> <opt_params>]
<version>
This is the type of the on-disk hash format.
@@ -62,6 +63,22 @@ Construction Parameters
<salt>
The hexadecimal encoding of the salt value.
<#opt_params>
Number of optional parameters. If there are no optional parameters,
the optional paramaters section can be skipped or #opt_params can be zero.
Otherwise #opt_params is the number of following arguments.
Example of optional parameters section:
1 ignore_corruption
ignore_corruption
Log corrupted blocks, but allow read operations to proceed normally.
restart_on_corruption
Restart the system when a corrupted block is discovered. This option is
not compatible with ignore_corruption and requires user space support to
avoid restart loops.
Theory of operation
===================
@@ -125,7 +142,7 @@ block boundary) are the hash blocks which are stored a depth at a time
The full specification of kernel parameters and on-disk metadata format
is available at the cryptsetup project's wiki page
http://code.google.com/p/cryptsetup/wiki/DMVerity
https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity
Status
======
@@ -142,7 +159,7 @@ Set up a device:
A command line tool veritysetup is available to compute or verify
the hash tree or activate the kernel device. This is available from
the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/
(as a libcryptsetup extension).
Create hash on the device:

View File

@@ -137,6 +137,17 @@ hosts. Overall, this is not hard, but the devil is in the details. I would
possibly disable lvmetad for clustered volume groups in the first phase and
only proceed when the local mode is robust and well tested.
With lvmlockd, lvmetad state is kept up to date by flagging either an
individual VG as "invalid", or the global state as "invalid". When either
the VG or the global state are read, this invalid flag is returned along
with the data. The client command can check for this invalid state and
decide to read the information from disk rather than use the stale cached
data. After the latest data is read from disk, the command may choose to
send it to lvmetad to update the cache. lvmlockd uses version numbers
embedded in its VG and global locks to detect when cached data becomes
invalid, and it then tells lvmetad to set the related invalid flag.
dct, 2015-06-23
Protocol & co.
--------------

81
doc/lvmpolld_overview.txt Normal file
View File

@@ -0,0 +1,81 @@
LVM poll daemon overview
========================
(last updated: 2015-05-09)
LVM poll daemon (lvmpolld) is the alternative for lvm2 classical polling
mechanisms. The motivation behind new lvmpolld was to create persistent
system service that would be more durable and transparent. It's suited
particularly for any systemd enabled distribution.
Before lvmpolld any background polling process originating in a lvm2 command
initiated inside cgroup of a systemd service could get killed if the main
process (service) exited in such cgroup. That could lead to premature termination
of such lvm2 polling process.
Also without lvmpolld there were no means to detect a particular polling process
suited for monitoring of specific operation is already in-progress and therefore
it's not desirable to start next one with exactly same task. lvmpolld is able to
detect such duplicate requests and not spawn such redundant process.
lvmpolld is primarily targeted for systems with systemd as init process. For systems
without systemd there's no need to install lvmpolld because there is no issue
with observation described in second paragraph. You can still benefit from
avoiding duplicate polling process being spawned, but without systemd lvmpolld
can't easily be run on-demand (activated by a socket maintained by systemd).
lvmpolld implement shutdown on idle and can shutdown automatically when idle
for requested time. 60 second is recommended default here. This behaviour can be
turned off if found useless.
Data structures
---------------
a) Logical Volume (struct lvmpolld_lv)
Each operation is identified by LV. Internal identifier within lvmpolld
is full LV uuid (vg_uuid+lv_uuid) prefixed with LVM_SYSTEM_DIR if set by client.
such full identifier may look like:
"/etc/lvm/lvm.confWFd2dU67S8Av29IcJCnYzqQirdfElnxzhCdzEh7EJrfCn9R1TIQjIj58weUZDre4"
or without LVM_SYSTEM_DIR being set explicitly:
"WFd2dU67S8Av29IcJCnYzqQirdfElnxzhCdzEh7EJrfCn9R1TIQjIj58weUZDre4"
LV carries various metadata about polling operation. The most significant are:
VG name
LV name
polling interval (usually --interval passed to lvm2 command or default from lvm2
configuration)
operation type (one of: pvmove, convert, merge, thin_merge)
LVM_SYSTEM_DIR (if set, this is also passed among environment variables of lvpoll
command spawned by lvmpolld)
b) LV stores (struct lvmpolld_store)
lvmpolld uses two stores for Logical volumes (struct lvmpolld_lv). One store for polling
operations in-progress. These operations are as of now: PV move, mirror up-conversion,
classical snapshot merge, thin snapshot merge.
The second store is suited only for pvmove --abort operations in-progress. Both
stores are independent and identical LVs (pvmove /dev/sda3 and pvmove --abort /dev/sda3)
can be run concurently from lvmpolld point of view (on lvm2 side the consistency is
guaranteed by lvm2 locking mechanism).
Locking order
-------------
There are two types of locks in lvmpolld. Each store has own store lock and each LV has
own lv lock.
Locking order is:
1) store lock
2) LV lock
Each LV has to be inside a store. When daemon requires to take both locks it has
to take a store lock first and LV lock has to be taken afterwards (after the
appropriate store lock where the LV is being stored :))

View File

@@ -1,11 +1,15 @@
@top_srcdir@/daemons/clvmd/clvm.h
@top_srcdir@/daemons/dmeventd/libdevmapper-event.h
@top_srcdir@/daemons/lvmetad/lvmetad-client.h
@top_srcdir@/daemons/lvmpolld/lvmpolld-protocol.h
@top_srcdir@/daemons/lvmpolld/polling_ops.h
@top_srcdir@/daemons/lvmlockd/lvmlockd-client.h
@top_srcdir@/liblvm/lvm2app.h
@top_srcdir@/lib/activate/activate.h
@top_srcdir@/lib/activate/targets.h
@top_srcdir@/lib/cache/lvmcache.h
@top_srcdir@/lib/cache/lvmetad.h
@top_srcdir@/lib/locking/lvmlockd.h
@top_srcdir@/lib/commands/toolcontext.h
@top_srcdir@/lib/config/config.h
@top_srcdir@/lib/config/config_settings.h
@@ -29,6 +33,8 @@
@top_srcdir@/lib/locking/locking.h
@top_srcdir@/lib/log/log.h
@top_srcdir@/lib/log/lvm-logging.h
@top_srcdir@/lib/lvmpolld/lvmpolld-client.h
@top_srcdir@/lib/lvmpolld/polldaemon.h
@top_srcdir@/lib/metadata/lv.h
@top_srcdir@/lib/metadata/lv_alloc.h
@top_srcdir@/lib/metadata/metadata.h
@@ -70,3 +76,4 @@
@top_srcdir@/libdm/misc/kdev_t.h
@top_srcdir@/po/pogen.h
@top_srcdir@/tools/lvm2cmd.h
@top_srcdir@/tools/tool.h

View File

@@ -20,8 +20,12 @@ include $(top_builddir)/make.tmpl
all: .symlinks_created
.symlinks_created: .symlinks
find . -maxdepth 1 -type l -exec $(RM) \{\} \;
LINKS := $(shell find . -maxdepth 1 -type l)
.symlinks_created: .symlinks
ifneq (,$(firstword $(LINKS)))
$(RM) $(LINKS)
endif
for i in `cat $<`; do $(LN_S) $$i ; done
touch $@
@@ -31,5 +35,5 @@ device-mapper: all
cflow: all
DISTCLEAN_TARGETS += $(shell find . -maxdepth 1 -type l)
DISTCLEAN_TARGETS += .include_symlinks .symlinks_created .symlinks
DISTCLEAN_TARGETS += .symlinks
CLEAN_TARGETS += $(LINKS) .include_symlinks .symlinks_created

View File

@@ -82,7 +82,6 @@ SOURCES =\
format_text/format-text.c \
format_text/import.c \
format_text/import_vsn1.c \
format_text/tags.c \
format_text/text_label.c \
freeseg/freeseg.c \
label/label.c \
@@ -196,6 +195,16 @@ ifeq ("@BUILD_LVMETAD@", "yes")
cache/lvmetad.c
endif
ifeq ("@BUILD_LVMPOLLD@", "yes")
SOURCES +=\
lvmpolld/lvmpolld-client.c
endif
ifeq ("@BUILD_LVMLOCKD@", "yes")
SOURCES +=\
locking/lvmlockd.c
endif
ifeq ("@DMEVENTD@", "yes")
CLDFLAGS += -L$(top_builddir)/daemons/dmeventd
LIBS += -ldevmapper-event

View File

@@ -180,7 +180,7 @@ int lv_passes_auto_activation_filter(struct cmd_context *cmd, struct logical_vol
{
const struct dm_config_node *cn;
if (!(cn = find_config_tree_node(cmd, activation_auto_activation_volume_list_CFG, NULL))) {
if (!(cn = find_config_tree_array(cmd, activation_auto_activation_volume_list_CFG, NULL))) {
log_verbose("activation/auto_activation_volume_list configuration setting "
"not defined: All logical volumes will be auto-activated.");
return 1;
@@ -467,7 +467,7 @@ static int _passes_activation_filter(struct cmd_context *cmd,
{
const struct dm_config_node *cn;
if (!(cn = find_config_tree_node(cmd, activation_volume_list_CFG, NULL))) {
if (!(cn = find_config_tree_array(cmd, activation_volume_list_CFG, NULL))) {
log_verbose("activation/volume_list configuration setting "
"not defined: Checking only host tags for %s/%s",
lv->vg->name, lv->name);
@@ -496,7 +496,7 @@ static int _passes_readonly_filter(struct cmd_context *cmd,
{
const struct dm_config_node *cn;
if (!(cn = find_config_tree_node(cmd, activation_read_only_volume_list_CFG, NULL)))
if (!(cn = find_config_tree_array(cmd, activation_read_only_volume_list_CFG, NULL)))
return 0;
return _lv_passes_volumes_filter(cmd, lv, cn, activation_read_only_volume_list_CFG);
@@ -648,8 +648,8 @@ static int _lv_info(struct cmd_context *cmd, const struct logical_volume *lv,
* in progress - as only those could lead to opened files
*/
if (with_open_count) {
if (locking_is_clustered())
sync_local_dev_names(cmd); /* Wait to have udev in sync */
if (locking_is_clustered() && !sync_local_dev_names(cmd)) /* Wait to have udev in sync */
return_0;
else if (fs_has_non_delete_ops())
fs_unlock(); /* For non clustered - wait if there are non-delete ops */
}
@@ -1813,7 +1813,9 @@ static int _lv_suspend(struct cmd_context *cmd, const char *lvid_s,
goto_out;
/* Ignore origin_only unless LV is origin in both old and new metadata */
if (!lv_is_thin_volume(ondisk_lv) && !(lv_is_origin(ondisk_lv) && lv_is_origin(incore_lv)))
/* or LV is thin or thin pool volume */
if (!lv_is_thin_volume(ondisk_lv) && !lv_is_thin_pool(ondisk_lv) &&
!(lv_is_origin(ondisk_lv) && lv_is_origin(incore_lv)))
laopts->origin_only = 0;
if (test_mode()) {
@@ -1987,7 +1989,6 @@ static int _lv_resume(struct cmd_context *cmd, const char *lvid_s,
const struct logical_volume *lv_to_free = NULL;
struct lvinfo info;
int r = 0;
int messages_only = 0;
if (!activation())
return 1;
@@ -1995,10 +1996,7 @@ static int _lv_resume(struct cmd_context *cmd, const char *lvid_s,
if (!lv && !(lv_to_free = lv = lv_from_lvid(cmd, lvid_s, 0)))
goto_out;
if (lv_is_thin_pool(lv) && laopts->origin_only)
messages_only = 1;
if (!lv_is_origin(lv) && !lv_is_thin_volume(lv))
if (!lv_is_origin(lv) && !lv_is_thin_volume(lv) && !lv_is_thin_pool(lv))
laopts->origin_only = 0;
if (test_mode()) {
@@ -2010,13 +2008,15 @@ static int _lv_resume(struct cmd_context *cmd, const char *lvid_s,
log_debug_activation("Resuming LV %s/%s%s%s%s.", lv->vg->name, lv->name,
error_if_not_active ? "" : " if active",
laopts->origin_only ? " without snapshots" : "",
laopts->origin_only ?
(lv_is_thin_pool(lv) ? " pool only" :
lv_is_thin_volume(lv) ? " thin only" : " without snapshots") : "",
laopts->revert ? " (reverting)" : "");
if (!lv_info(cmd, lv, laopts->origin_only, &info, 0, 0))
goto_out;
if (!info.exists || !(info.suspended || messages_only)) {
if (!info.exists || !info.suspended) {
if (error_if_not_active)
goto_out;
r = 1;
@@ -2239,7 +2239,7 @@ static int _lv_activate(struct cmd_context *cmd, const char *lvid_s,
}
/*
* Check if cmirord is running for clustered mirrors.
* Check if cmirrord is running for clustered mirrors.
*/
if (!laopts->exclusive && vg_is_clustered(lv->vg) &&
lv_is_mirror(lv) && !lv_is_raid(lv) &&
@@ -2272,6 +2272,7 @@ static int _lv_activate(struct cmd_context *cmd, const char *lvid_s,
if (info.exists && !info.suspended && info.live_table &&
(info.read_only == read_only_lv(lv, laopts))) {
r = 1;
log_debug_activation("Volume is already active.");
goto out;
}

View File

@@ -60,6 +60,7 @@ struct dev_manager {
uint32_t pvmove_mirror_count;
int flush_required;
int activation; /* building activation tree */
int suspend; /* building suspend tree */
int skip_external_lv;
struct dm_list pending_delete; /* str_list of dlid(s) with pending delete */
unsigned track_pending_delete;
@@ -445,6 +446,78 @@ out:
return r;
}
static int _device_is_suspended(int major, int minor)
{
struct dm_task *dmt;
struct dm_info info;
int r = 0;
if (!(dmt = dm_task_create(DM_DEVICE_INFO)))
return 0;
if (!dm_task_set_major_minor(dmt, major, minor, 1))
goto_out;
if (activation_checks() && !dm_task_enable_checks(dmt))
goto_out;
if (!dm_task_run(dmt) ||
!dm_task_get_info(dmt, &info)) {
log_error("Failed to get info for device %d:%d", major, minor);
goto out;
}
r = info.exists && info.suspended;
out:
dm_task_destroy(dmt);
return r;
}
static int _ignore_suspended_snapshot_component(struct device *dev)
{
struct dm_task *dmt;
void *next = NULL;
char *params, *target_type = NULL;
uint64_t start, length;
int major1, minor1, major2, minor2;
int r = 0;
if (!(dmt = dm_task_create(DM_DEVICE_TABLE)))
return_0;
if (!dm_task_set_major_minor(dmt, MAJOR(dev->dev), MINOR(dev->dev), 1))
goto_out;
if (activation_checks() && !dm_task_enable_checks(dmt))
goto_out;
if (!dm_task_run(dmt)) {
log_error("Failed to get state of snapshot or snapshot origin device");
goto out;
}
do {
next = dm_get_next_target(dmt, next, &start, &length, &target_type, &params);
if (!strcmp(target_type, "snapshot")) {
if (sscanf(params, "%d:%d %d:%d", &major1, &minor1, &major2, &minor2) != 4) {
log_error("Incorrect snapshot table found");
goto_out;
}
r = r || _device_is_suspended(major1, minor1) || _device_is_suspended(major2, minor2);
} else if (!strcmp(target_type, "snapshot-origin")) {
if (sscanf(params, "%d:%d", &major1, &minor1) != 2) {
log_error("Incorrect snapshot-origin table found");
goto_out;
}
r = r || _device_is_suspended(major1, minor1);
}
} while (next);
out:
dm_task_destroy(dmt);
return r;
}
/*
* device_is_usable
* @dev
@@ -553,15 +626,25 @@ int device_is_usable(struct device *dev, struct dev_usable_check_params check)
* supported anymore and in general using mirrors in a stack
* is disabled by default (with a warning that if enabled,
* it could cause various deadlocks).
* This is former check used, but it's not correct as it
* disables snapshot-origins to be used in a stack in
* general, not just over mirrors!
* Similar situation can happen with RAID devices where
* a RAID device can be snapshotted.
* If one of the RAID legs are down and we're doing
* lvconvert --repair, there's a time period in which
* snapshot components are (besides other devs) suspended.
* See also https://bugzilla.redhat.com/show_bug.cgi?id=1219222
* for an example where this causes problems.
*
* This is a quick check for now, but replace it with more
* robust and better check that would check the stack
* correctly, not just snapshots but any cobimnation possible
* in a stack - use proper dm tree to check this instead.
*/
/*if (check.check_suspended && target_type && !strcmp(target_type, "snapshot-origin")) {
log_debug_activation("%s: Snapshot-origin device %s not usable.",
dev_name(dev), name);
if (check.check_suspended && target_type &&
(!strcmp(target_type, "snapshot") || !strcmp(target_type, "snapshot-origin")) &&
_ignore_suspended_snapshot_component(dev)) {
log_debug_activation("%s: %s device %s not usable.", dev_name(dev), target_type, name);
goto out;
}*/
}
if (target_type && strcmp(target_type, "error"))
only_error_target = 0;
@@ -1835,7 +1918,6 @@ struct pool_cb_data {
int skip_zero; /* to skip zeroed device header (check first 64B) */
int exec; /* which binary to call */
int opts;
const char *defaults;
const char *global;
};
@@ -1843,7 +1925,6 @@ static int _pool_callback(struct dm_tree_node *node,
dm_node_callback_t type, void *cb_data)
{
int ret, status, fd;
char *split;
const struct dm_config_node *cn;
const struct dm_config_value *cv;
const struct pool_cb_data *data = cb_data;
@@ -1858,23 +1939,19 @@ static int _pool_callback(struct dm_tree_node *node,
if (!*argv[0])
return 1; /* Checking disabled */
if ((cn = find_config_tree_node(mlv->vg->cmd, data->opts, NULL))) {
for (cv = cn->v; cv && args < 16; cv = cv->next) {
if (cv->type != DM_CFG_STRING) {
log_error("Invalid string in config file: "
"global/%s_check_options",
data->global);
return 0;
}
argv[++args] = cv->v.str;
}
} else {
/* Use default options (no support for options with spaces) */
if (!(split = dm_pool_strdup(data->dm->mem, data->defaults))) {
log_error("Failed to duplicate defaults.");
if (!(cn = find_config_tree_array(mlv->vg->cmd, data->opts, NULL))) {
log_error(INTERNAL_ERROR "Unable to find configuration for pool check options.");
return 0;
}
for (cv = cn->v; cv && args < 16; cv = cv->next) {
if (cv->type != DM_CFG_STRING) {
log_error("Invalid string in config file: "
"global/%s_check_options",
data->global);
return 0;
}
args = dm_split_words(split, 16, 0, (char**) argv + 1);
argv[++args] = cv->v.str;
}
if (args == 16) {
@@ -1965,14 +2042,12 @@ static int _pool_register_callback(struct dev_manager *dm,
data->skip_zero = 1;
data->exec = global_thin_check_executable_CFG;
data->opts = global_thin_check_options_CFG;
data->defaults = DEFAULT_THIN_CHECK_OPTIONS;
data->global = "thin";
} else if (lv_is_cache(lv)) { /* cache pool */
data->pool_lv = first_seg(lv)->pool_lv;
data->skip_zero = dm->activation;
data->exec = global_cache_check_executable_CFG;
data->opts = global_cache_check_options_CFG;
data->defaults = DEFAULT_CACHE_CHECK_OPTIONS;
data->global = "cache";
} else {
log_error(INTERNAL_ERROR "Registering unsupported pool callback.");
@@ -1984,6 +2059,11 @@ static int _pool_register_callback(struct dev_manager *dm,
return 1;
}
/* Declaration to resolve suspend tree and message passing for thin-pool */
static int _add_target_to_dtree(struct dev_manager *dm,
struct dm_tree_node *dnode,
struct lv_segment *seg,
struct lv_activate_opts *laopts);
/*
* Add LV and any known dependencies
*/
@@ -2052,15 +2132,43 @@ static int _add_lv_to_dtree(struct dev_manager *dm, struct dm_tree *dtree,
*/
if (!_add_dev_to_dtree(dm, dtree, lv, lv_layer(lv)))
return_0;
/*
* TODO: change API and move this code
* Could be easier to handle this in _add_dev_to_dtree()
* and base this according to info.exists ?
*/
if (!dm->activation) {
/* Setup callback for non-activation partial tree */
/* Activation gets own callback when needed */
/* TODO: extend _cached_dm_info() to return dnode */
if (!(uuid = build_dm_uuid(dm->mem, lv, lv_layer(lv))))
return_0;
if ((node = dm_tree_find_node_by_uuid(dtree, uuid)) &&
!_pool_register_callback(dm, node, lv))
return_0;
if ((node = dm_tree_find_node_by_uuid(dtree, uuid))) {
if (origin_only) {
struct lv_activate_opts laopts = {
.origin_only = 1,
.send_messages = 1 /* Node with messages */
};
/*
* Add some messsages if right node exist in the table only
* when building SUSPEND tree for origin-only thin-pool.
*
* TODO: Fix call of '_add_target_to_dtree()' to add message
* to thin-pool node as we already know the pool node exists
* in the table. Any better/cleaner API way ?
*
* Probably some 'new' target method to add messages for any node?
*/
if (dm->suspend &&
!dm_list_empty(&(first_seg(lv)->thin_messages)) &&
!_add_target_to_dtree(dm, node, first_seg(lv), &laopts))
return_0;
} else {
/* Setup callback for non-activation partial tree */
/* Activation gets own callback when needed */
/* TODO: extend _cached_dm_info() to return dnode */
if (!_pool_register_callback(dm, node, lv))
return_0;
}
}
}
}
@@ -2158,7 +2266,7 @@ static struct dm_tree *_create_partial_dtree(struct dev_manager *dm, const struc
dm_tree_set_optional_uuid_suffixes(dtree, &uuid_suffix_list[0]);
if (!_add_lv_to_dtree(dm, dtree, lv, (lv_is_origin(lv) || lv_is_thin_volume(lv)) ? origin_only : 0))
if (!_add_lv_to_dtree(dm, dtree, lv, (lv_is_origin(lv) || lv_is_thin_volume(lv) || lv_is_thin_pool(lv)) ? origin_only : 0))
goto_bad;
return dtree;
@@ -2613,7 +2721,7 @@ static int _add_segment_to_dtree(struct dev_manager *dm,
return_0;
/* Add pool layer */
if (seg->pool_lv &&
if (seg->pool_lv && !laopts->origin_only &&
!_add_new_lv_to_dtree(dm, dtree, seg->pool_lv, laopts,
lv_layer(seg->pool_lv)))
return_0;
@@ -3042,7 +3150,10 @@ static int _tree_action(struct dev_manager *dm, const struct logical_volume *lv,
int r = 0;
if (action < DM_ARRAY_SIZE(_action_names))
log_debug_activation("Creating %s tree for %s.", _action_names[action], lv->name);
log_debug_activation("Creating %s%s tree for %s.",
_action_names[action],
(laopts->origin_only) ? " origin-only" : "",
display_lvname(lv));
/* Some LV can be used for top level tree */
/* TODO: add more.... */
@@ -3052,6 +3163,7 @@ static int _tree_action(struct dev_manager *dm, const struct logical_volume *lv,
}
/* Some targets may build bigger tree for activation */
dm->activation = ((action == PRELOAD) || (action == ACTIVATE));
dm->suspend = (action == SUSPEND_WITH_LOCKFS) || (action == SUSPEND);
if (!(dtree = _create_partial_dtree(dm, lv, laopts->origin_only)))
return_0;
@@ -3096,7 +3208,9 @@ static int _tree_action(struct dev_manager *dm, const struct logical_volume *lv,
case PRELOAD:
case ACTIVATE:
/* Add all required new devices to tree */
if (!_add_new_lv_to_dtree(dm, dtree, lv, laopts, (lv_is_origin(lv) && laopts->origin_only) ? "real" : NULL))
if (!_add_new_lv_to_dtree(dm, dtree, lv, laopts,
(lv_is_origin(lv) && laopts->origin_only) ? "real" :
(lv_is_thin_pool(lv) && laopts->origin_only) ? "tpool" : NULL))
goto_out;
/* Preload any devices required before any suspensions */
@@ -3134,7 +3248,6 @@ out_no_root:
int dev_manager_activate(struct dev_manager *dm, const struct logical_volume *lv,
struct lv_activate_opts *laopts)
{
laopts->send_messages = 1;
if (!_tree_action(dm, lv, laopts, ACTIVATE))
return_0;

338
lib/cache/lvmcache.c vendored
View File

@@ -67,6 +67,7 @@ struct lvmcache_vginfo {
unsigned vg_use_count; /* Counter of vg reusage */
unsigned precommitted; /* Is vgmetadata live or precommitted? */
unsigned cached_vg_invalidated; /* Signal to regenerate cached_vg */
unsigned preferred_duplicates; /* preferred duplicate pvs have been set */
};
static struct dm_hash_table *_pvid_hash = NULL;
@@ -115,6 +116,47 @@ int lvmcache_init(void)
return 1;
}
/*
* Once PV info has been populated in lvmcache and
* lvmcache has chosen preferred duplicate devices,
* set this flag so that lvmcache will not try to
* compare and choose preferred duplicate devices
* again (which may result in different preferred
* devices.) PV info can be populated in lvmcache
* multiple times, each time causing lvmcache to
* compare the duplicate devices, so we need to
* record that the comparison/preferences have
* already been done, so the preferrences from the
* first time through are not changed.
*
* This is something of a hack to work around the
* fact that the code isn't really designed to
* handle duplicate PVs, and the fact that lvmetad
* has its own way of picking a preferred duplicate
* and lvmcache has another way based on having
* more information than lvmetad does.
*
* If we come up with a better overall method to
* handle duplicate PVs, then this can probably be
* removed.
*
* FIXME: if we want to make lvmetad work with clvmd,
* then this may need to be changed to set
* preferred_duplicates back to 0.
*/
void lvmcache_set_preferred_duplicates(const char *vgid)
{
struct lvmcache_vginfo *vginfo;
if (!(vginfo = lvmcache_vginfo_from_vgid(vgid))) {
stack;
return;
}
vginfo->preferred_duplicates = 1;
}
void lvmcache_seed_infos_from_lvmetad(struct cmd_context *cmd)
{
if (!lvmetad_active() || _has_scanned)
@@ -287,7 +329,7 @@ void lvmcache_commit_metadata(const char *vgname)
void lvmcache_drop_metadata(const char *vgname, int drop_precommitted)
{
if (lvmcache_vgname_is_locked(VG_GLOBAL))
if (lvmcache_vgname_is_locked(VG_GLOBAL) && !vg_write_lock_held())
return;
/* For VG_ORPHANS, we need to invalidate all labels on orphan PVs. */
@@ -863,6 +905,37 @@ int lvmcache_vginfo_holders_dec_and_test_for_zero(struct lvmcache_vginfo *vginfo
}
// #endif
int lvmcache_get_vgnameids(struct cmd_context *cmd, int include_internal,
struct dm_list *vgnameids)
{
struct vgnameid_list *vgnl;
struct lvmcache_vginfo *vginfo;
lvmcache_label_scan(cmd, 0);
dm_list_iterate_items(vginfo, &_vginfos) {
if (!include_internal && is_orphan_vg(vginfo->vgname))
continue;
if (!(vgnl = dm_pool_alloc(cmd->mem, sizeof(*vgnl)))) {
log_error("vgnameid_list allocation failed.");
return 0;
}
vgnl->vgid = dm_pool_strdup(cmd->mem, vginfo->vgid);
vgnl->vg_name = dm_pool_strdup(cmd->mem, vginfo->vgname);
if (!vgnl->vgid || !vgnl->vg_name) {
log_error("vgnameid_list member allocation failed.");
return 0;
}
dm_list_add(vgnameids, &vgnl->list);
}
return 1;
}
struct dm_list *lvmcache_get_vgids(struct cmd_context *cmd,
int include_internal)
{
@@ -1529,6 +1602,64 @@ void lvmcache_replace_dev(struct cmd_context *cmd, struct physical_volume *pv,
pv->dev = dev;
}
/*
* We can see multiple different devices with the
* same pvid, i.e. duplicates.
*
* There may be different reasons for seeing two
* devices with the same pvid:
* - multipath showing two paths to the same thing
* - one device copied to another, e.g. with dd,
* also referred to as cloned devices.
* - a "subsystem" taking a device and creating
* another device of its own that represents the
* underlying device it is using, e.g. using dm
* to create an identity mapping of a PV.
*
* Given duplicate devices, we have to choose one
* of them to be the "preferred" dev, i.e. the one
* that will be referenced in lvmcache, by pv->dev.
* We can keep the existing dev, that's currently
* used in lvmcache, or we can replace the existing
* dev with the new duplicate.
*
* Regardless of which device is preferred, we need
* to print messages explaining which devices were
* found so that a user can sort out for themselves
* what has happened if the preferred device is not
* the one they are interested in.
*
* If a user wants to use the non-preferred device,
* they will need to filter out the device that
* lvm is preferring.
*
* The dev_subsystem calls check if the major number
* of the dev is part of a subsystem like DM/MD/DRBD.
* A dev that's part of a subsystem is preferred over a
* duplicate of that dev that is not part of a
* subsystem.
*
* The has_holders calls check if the device is being
* used by another, and prefers one that's being used.
*
* FIXME: why do we prefer a device without holders
* over a device with holders? We should understand
* the reason for that choice.
*
* FIXME: there may be other reasons to prefer one
* device over another:
*
* . are there other use/open counts we could check
* beyond the holders?
*
* . check if either is bad/usable and prefer
* the good one?
*
* . prefer the one with smaller minor number?
* Might avoid disturbing things due to a new
* transient duplicate?
*/
struct lvmcache_info *lvmcache_add(struct labeller *labeller, const char *pvid,
struct device *dev,
const char *vgname, const char *vgid,
@@ -1544,6 +1675,7 @@ struct lvmcache_info *lvmcache_add(struct labeller *labeller, const char *pvid,
.vgstatus = vgstatus,
};
/* N.B. vgid is not NUL-terminated when called from _text_pv_write */
if (vgid)
strncpy((char *)&vgsummary.vgid, vgid, sizeof(vgsummary.vgid));
@@ -1575,51 +1707,166 @@ struct lvmcache_info *lvmcache_add(struct labeller *labeller, const char *pvid,
lvmcache_del_bas(info);
} else {
if (existing->dev != dev) {
/* Is the existing entry a duplicate pvid e.g. md ? */
if (dev_subsystem_part_major(dt, existing->dev) &&
!dev_subsystem_part_major(dt, dev)) {
log_very_verbose("Ignoring duplicate PV %s on "
"%s - using %s %s",
pvid, dev_name(dev),
dev_subsystem_name(dt, existing->dev),
dev_name(existing->dev));
return NULL;
} else if (dm_is_dm_major(MAJOR(existing->dev->dev)) &&
!dm_is_dm_major(MAJOR(dev->dev))) {
log_very_verbose("Ignoring duplicate PV %s on "
"%s - using dm %s",
pvid, dev_name(dev),
dev_name(existing->dev));
return NULL;
} else if (!dev_subsystem_part_major(dt, existing->dev) &&
dev_subsystem_part_major(dt, dev))
log_very_verbose("Duplicate PV %s on %s - "
"using %s %s", pvid,
dev_name(existing->dev),
dev_subsystem_name(dt, existing->dev),
dev_name(dev));
else if (!dm_is_dm_major(MAJOR(existing->dev->dev)) &&
dm_is_dm_major(MAJOR(dev->dev)))
log_very_verbose("Duplicate PV %s on %s - "
"using dm %s", pvid,
dev_name(existing->dev),
dev_name(dev));
/* FIXME If both dm, check dependencies */
//else if (dm_is_dm_major(MAJOR(existing->dev->dev)) &&
//dm_is_dm_major(MAJOR(dev->dev)))
//
else if (!strcmp(pvid_s, existing->dev->pvid)) {
log_error("Found duplicate PV %s: using %s not "
"%s", pvid, dev_name(dev),
dev_name(existing->dev));
_found_duplicate_pvs = 1;
int old_in_subsystem = 0;
int new_in_subsystem = 0;
int old_is_dm = 0;
int new_is_dm = 0;
int old_has_holders = 0;
int new_has_holders = 0;
/*
* Here are different devices with the same pvid:
* duplicates. See comment above.
*/
/*
* This flag tells the process_each_pv code to search
* the devices list for duplicates, so that devices
* can be processed together with their duplicates
* (while processing the VG, rather than reporting
* pv->dev under the VG, and its duplicate outside
* the VG context.)
*/
_found_duplicate_pvs = 1;
/*
* The new dev may not have pvid set.
* The process_each_pv code needs to have the pvid
* set in each device to detect that the devices
* are duplicates.
*/
strncpy(dev->pvid, pvid_s, sizeof(dev->pvid));
/*
* Now decide if we are going to ignore the new
* device, or replace the existing/old device in
* lvmcache with the new one.
*/
old_in_subsystem = dev_subsystem_part_major(dt, existing->dev);
new_in_subsystem = dev_subsystem_part_major(dt, dev);
old_is_dm = dm_is_dm_major(MAJOR(existing->dev->dev));
new_is_dm = dm_is_dm_major(MAJOR(dev->dev));
old_has_holders = dm_device_has_holders(MAJOR(existing->dev->dev), MINOR(existing->dev->dev));
new_has_holders = dm_device_has_holders(MAJOR(dev->dev), MINOR(dev->dev));
if (old_has_holders && new_has_holders) {
/*
* This is not a selection of old or new, but
* just a warning to be aware of.
*/
log_warn("WARNING: duplicate PV %s is being used from both devices %s and %s",
pvid_s,
dev_name(existing->dev),
dev_name(dev));
}
if (existing->vginfo->preferred_duplicates) {
/*
* The preferred duplicate devs have already
* been chosen during a previous populating of
* lvmcache, so just use the existing preferences.
*/
log_verbose("Found duplicate PV %s: using existing dev %s",
pvid_s,
dev_name(existing->dev));
return NULL;
}
if (old_in_subsystem && !new_in_subsystem) {
/* Use old, ignore new. */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(existing->dev),
dev_name(dev));
log_warn("Using duplicate PV %s from subsystem %s, ignoring %s",
dev_name(existing->dev),
dev_subsystem_name(dt, existing->dev),
dev_name(dev));
return NULL;
} else if (!old_in_subsystem && new_in_subsystem) {
/* Use new, replace old. */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(dev),
dev_name(existing->dev));
log_warn("Using duplicate PV %s from subsystem %s, replacing %s",
dev_name(dev),
dev_subsystem_name(dt, dev),
dev_name(existing->dev));
} else if (old_has_holders && !new_has_holders) {
/* Use new, replace old. */
/* FIXME: why choose the one without olders? */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(dev),
dev_name(existing->dev));
log_warn("Using duplicate PV %s without holders, replacing %s",
dev_name(dev),
dev_name(existing->dev));
} else if (!old_has_holders && new_has_holders) {
/* Use old, ignore new. */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(existing->dev),
dev_name(dev));
log_warn("Using duplicate PV %s without holders, ignoring %s",
dev_name(existing->dev),
dev_name(dev));
return NULL;
} else if (old_is_dm && new_is_dm) {
/* Use new, replace old. */
/* FIXME: why choose the new instead of the old? */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(dev),
dev_name(existing->dev));
log_warn("Using duplicate PV %s which is last seen, replacing %s",
dev_name(dev),
dev_name(existing->dev));
} else if (!strcmp(pvid_s, existing->dev->pvid)) {
/* No criteria to use for preferring old or new. */
/* FIXME: why choose the new instead of the old? */
/* FIXME: a transient duplicate would be a reason
* to select the old instead of the new. */
log_warn("Found duplicate PV %s: using %s not %s",
pvid_s,
dev_name(dev),
dev_name(existing->dev));
log_warn("Using duplicate PV %s which is last seen, replacing %s",
dev_name(dev),
dev_name(existing->dev));
}
} else {
/*
* The new dev is the same as the existing dev.
*
* FIXME: Why can't we just return NULL here if the
* device already exists? Things don't seem to work
* if we do that for some reason.
*/
log_verbose("Found same device %s with same pvid %s",
dev_name(existing->dev), pvid_s);
}
if (strcmp(pvid_s, existing->dev->pvid))
log_debug_cache("Updating pvid cache to %s (%s) from %s (%s)",
pvid_s, dev_name(dev),
existing->dev->pvid, dev_name(existing->dev));
/* Switch over to new preferred device */
/*
* This happens when running pvcreate on an existing PV.
*/
if (strcmp(pvid_s, existing->dev->pvid)) {
log_verbose("Replacing dev %s pvid %s with dev %s pvid %s",
dev_name(existing->dev), existing->dev->pvid,
dev_name(dev), pvid_s);
}
/*
* Switch over to new preferred device.
*/
existing->dev = dev;
info = existing;
/* Has labeller changed? */
@@ -2069,7 +2316,8 @@ int lvmcache_lookup_mda(struct lvmcache_vgsummary *vgsummary)
vgsummary->vgname = vginfo->vgname;
vgsummary->creation_host = vginfo->creation_host;
vgsummary->vgstatus = vginfo->status;
memcpy((char *)&vgsummary->vgid, vginfo->vgid, sizeof(vginfo->vgid));
/* vginfo->vgid has 1 extra byte then vgsummary->vgid */
memcpy(&vgsummary->vgid, vginfo->vgid, sizeof(vgsummary->vgid));
return 1;
}

View File

@@ -107,6 +107,9 @@ struct dm_list *lvmcache_get_vgnames(struct cmd_context *cmd,
struct dm_list *lvmcache_get_vgids(struct cmd_context *cmd,
int include_internal);
int lvmcache_get_vgnameids(struct cmd_context *cmd, int include_internal,
struct dm_list *vgnameids);
/* Returns list of struct dm_str_list containing pool-allocated copy of pvids */
struct dm_list *lvmcache_get_pvids(struct cmd_context *cmd, const char *vgname,
const char *vgid);
@@ -171,4 +174,6 @@ void lvmcache_replace_dev(struct cmd_context *cmd, struct physical_volume *pv,
int lvmcache_found_duplicate_pvs(void);
void lvmcache_set_preferred_duplicates(const char *vgid);
#endif

603
lib/cache/lvmetad.c vendored
View File

@@ -22,6 +22,7 @@
#include "format-text.h" // TODO for disk_locn, used as a DA representation
#include "crc.h"
#include "lvm-signal.h"
#include "lvmlockd.h"
#define SCAN_TIMEOUT_SECONDS 80
#define MAX_RESCANS 10 /* Maximum number of times to scan all PVs and retry if the daemon returns a token mismatch error */
@@ -34,12 +35,13 @@ static char *_lvmetad_token = NULL;
static const char *_lvmetad_socket = NULL;
static struct cmd_context *_lvmetad_cmd = NULL;
static struct volume_group *lvmetad_pvscan_vg(struct cmd_context *cmd, struct volume_group *vg);
void lvmetad_disconnect(void)
{
if (_lvmetad_connected)
daemon_close(_lvmetad);
_lvmetad_connected = 0;
_lvmetad_cmd = NULL;
}
void lvmetad_init(struct cmd_context *cmd)
@@ -47,6 +49,10 @@ void lvmetad_init(struct cmd_context *cmd)
if (!_lvmetad_use && !access(getenv("LVM_LVMETAD_PIDFILE") ? : LVMETAD_PIDFILE, F_OK))
log_warn("WARNING: lvmetad is running but disabled."
" Restart lvmetad before enabling it!");
if (_lvmetad_connected)
log_debug(INTERNAL_ERROR "Refreshing lvmetad global handle while connection with the daemon is active");
_lvmetad_cmd = cmd;
}
@@ -142,7 +148,7 @@ static int _lvmetad_pvscan_all_devs(struct cmd_context *cmd, activation_handler
static daemon_reply _lvmetad_send(const char *id, ...)
{
va_list ap;
daemon_reply repl;
daemon_reply repl = { 0 };
daemon_request req;
unsigned num_rescans = 0;
unsigned total_usecs_waited = 0;
@@ -152,8 +158,10 @@ static daemon_reply _lvmetad_send(const char *id, ...)
retry:
req = daemon_request_make(id);
if (_lvmetad_token)
daemon_request_extend(req, "token = %s", _lvmetad_token, NULL);
if (_lvmetad_token && !daemon_request_extend(req, "token = %s", _lvmetad_token, NULL)) {
repl.error = ENOMEM;
return repl;
}
va_start(ap, id);
daemon_request_extend_v(req, ap);
@@ -265,19 +273,21 @@ static int _read_mda(struct lvmcache_info *info,
return 0;
}
static struct lvmcache_info *_pv_populate_lvmcache(struct cmd_context *cmd,
struct dm_config_node *cn,
struct format_type *fmt, dev_t fallback)
static int _pv_populate_lvmcache(struct cmd_context *cmd,
struct dm_config_node *cn,
struct format_type *fmt, dev_t fallback)
{
struct device *dev;
struct device *dev, *dev_alternate, *dev_alternate_cache = NULL;
struct label *label;
struct id pvid, vgid;
char mda_id[32];
char da_id[32];
int i = 0;
struct dm_config_node *mda = NULL;
struct dm_config_node *da = NULL;
struct dm_config_node *mda, *da;
struct dm_config_node *alt_devices = dm_config_find_node(cn->child, "devices_alternate");
struct dm_config_value *alt_device = NULL;
uint64_t offset, size;
struct lvmcache_info *info;
struct lvmcache_info *info, *info_alternate;
const char *pvid_txt = dm_config_find_str(cn->child, "id", NULL),
*vgid_txt = dm_config_find_str(cn->child, "vgid", NULL),
*vgname = dm_config_find_str(cn->child, "vgname", NULL),
@@ -291,7 +301,7 @@ static struct lvmcache_info *_pv_populate_lvmcache(struct cmd_context *cmd,
if (!fmt) {
log_error("PV %s not recognised. Is the device missing?", pvid_txt);
return NULL;
return 0;
}
dev = dev_cache_get_by_devt(devt, cmd->filter);
@@ -300,17 +310,17 @@ static struct lvmcache_info *_pv_populate_lvmcache(struct cmd_context *cmd,
if (!dev) {
log_warn("WARNING: Device for PV %s not found or rejected by a filter.", pvid_txt);
return NULL;
return 0;
}
if (!pvid_txt || !id_read_format(&pvid, pvid_txt)) {
log_error("Missing or ill-formatted PVID for PV: %s.", pvid_txt);
return NULL;
return 0;
}
if (vgid_txt) {
if (!id_read_format(&vgid, vgid_txt))
return_NULL;
return_0;
} else
strcpy((char*)&vgid, fmt->orphan_vg_name);
@@ -319,7 +329,7 @@ static struct lvmcache_info *_pv_populate_lvmcache(struct cmd_context *cmd,
if (!(info = lvmcache_add(fmt->labeller, (const char *)&pvid, dev,
vgname, (const char *)&vgid, 0)))
return_NULL;
return_0;
lvmcache_get_label(info)->sector = label_sector;
lvmcache_get_label(info)->dev = dev;
@@ -360,12 +370,59 @@ static struct lvmcache_info *_pv_populate_lvmcache(struct cmd_context *cmd,
++i;
} while (da);
return info;
if (alt_devices)
alt_device = alt_devices->v;
while (alt_device) {
dev_alternate = dev_cache_get_by_devt(alt_device->v.i, cmd->filter);
if (dev_alternate) {
if ((info_alternate = lvmcache_add(fmt->labeller, (const char *)&pvid, dev_alternate,
vgname, (const char *)&vgid, 0))) {
dev_alternate_cache = dev_alternate;
info = info_alternate;
lvmcache_get_label(info)->dev = dev_alternate;
}
} else {
log_warn("Duplicate of PV %s dev %s exists on unknown device %"PRId64 ":%" PRId64,
pvid_txt, dev_name(dev), MAJOR(alt_device->v.i), MINOR(alt_device->v.i));
}
alt_device = alt_device->next;
}
/*
* Update lvmcache with the info about the alternate device by
* reading its label, which should update lvmcache.
*/
if (dev_alternate_cache) {
if (!label_read(dev_alternate_cache, &label, 0)) {
log_warn("No PV label found on duplicate device %s.", dev_name(dev_alternate_cache));
}
}
lvmcache_set_preferred_duplicates((const char *)&vgid);
return 1;
}
static int _pv_update_struct_pv(struct physical_volume *pv, struct format_instance *fid)
{
struct lvmcache_info *info;
if ((info = lvmcache_info_from_pvid((const char *)&pv->id, 0))) {
pv->label_sector = lvmcache_get_label(info)->sector;
pv->dev = lvmcache_device(info);
if (!pv->dev)
pv->status |= MISSING_PV;
if (!lvmcache_fid_add_mdas_pv(info, fid))
return_0;
pv->fid = fid;
} else
pv->status |= MISSING_PV; /* probably missing */
return 1;
}
struct volume_group *lvmetad_vg_lookup(struct cmd_context *cmd, const char *vgname, const char *vgid)
{
struct volume_group *vg = NULL;
struct volume_group *vg2 = NULL;
daemon_reply reply;
int found;
char uuid[64];
@@ -377,7 +434,6 @@ struct volume_group *lvmetad_vg_lookup(struct cmd_context *cmd, const char *vgna
struct format_type *fmt;
struct dm_config_node *pvcn;
struct pv_list *pvl;
struct lvmcache_info *info;
if (!lvmetad_active())
return NULL;
@@ -428,22 +484,38 @@ struct volume_group *lvmetad_vg_lookup(struct cmd_context *cmd, const char *vgna
for (pvcn = pvcn->child; pvcn; pvcn = pvcn->sib)
_pv_populate_lvmcache(cmd, pvcn, fmt, 0);
if ((pvcn = dm_config_find_node(top, "metadata/outdated_pvs")))
for (pvcn = pvcn->child; pvcn; pvcn = pvcn->sib)
_pv_populate_lvmcache(cmd, pvcn, fmt, 0);
top->key = name;
if (!(vg = import_vg_from_config_tree(reply.cft, fid)))
if (!(vg = import_vg_from_lvmetad_config_tree(reply.cft, fid)))
goto_out;
/*
* locking may have detected a newer vg version and
* invalidated the cached vg.
*/
if (dm_config_find_node(reply.cft->root, "vg_invalid")) {
log_debug_lvmetad("Update invalid lvmetad cache for VG %s", vgname);
vg2 = lvmetad_pvscan_vg(cmd, vg);
release_vg(vg);
vg = vg2;
fid = vg->fid;
}
dm_list_iterate_items(pvl, &vg->pvs) {
if ((info = lvmcache_info_from_pvid((const char *)&pvl->pv->id, 0))) {
pvl->pv->label_sector = lvmcache_get_label(info)->sector;
pvl->pv->dev = lvmcache_device(info);
if (!pvl->pv->dev)
pvl->pv->status |= MISSING_PV;
if (!lvmcache_fid_add_mdas_pv(info, fid)) {
vg = NULL;
goto_out; /* FIXME error path */
}
} else
pvl->pv->status |= MISSING_PV; /* probably missing */
if (!_pv_update_struct_pv(pvl->pv, fid)) {
vg = NULL;
goto_out; /* FIXME error path */
}
}
dm_list_iterate_items(pvl, &vg->pvs_outdated) {
if (!_pv_update_struct_pv(pvl->pv, fid)) {
vg = NULL;
goto_out; /* FIXME error path */
}
}
lvmcache_update_vg(vg, 0);
@@ -642,6 +714,56 @@ int lvmetad_pv_list_to_lvmcache(struct cmd_context *cmd)
return 1;
}
int lvmetad_get_vgnameids(struct cmd_context *cmd, struct dm_list *vgnameids)
{
struct vgnameid_list *vgnl;
struct id vgid;
const char *vgid_txt;
const char *vg_name;
daemon_reply reply;
struct dm_config_node *cn;
log_debug_lvmetad("Asking lvmetad for complete list of known VG ids/names");
reply = _lvmetad_send("vg_list", NULL);
if (!_lvmetad_handle_reply(reply, "list VGs", "", NULL)) {
daemon_reply_destroy(reply);
return_0;
}
if ((cn = dm_config_find_node(reply.cft->root, "volume_groups"))) {
for (cn = cn->child; cn; cn = cn->sib) {
vgid_txt = cn->key;
if (!id_read_format(&vgid, vgid_txt)) {
stack;
continue;
}
if (!(vgnl = dm_pool_alloc(cmd->mem, sizeof(*vgnl)))) {
log_error("vgnameid_list allocation failed.");
return 0;
}
if (!(vg_name = dm_config_find_str(cn->child, "name", NULL))) {
log_error("vg_list no name found.");
return 0;
}
vgnl->vgid = dm_pool_strdup(cmd->mem, (char *)&vgid);
vgnl->vg_name = dm_pool_strdup(cmd->mem, vg_name);
if (!vgnl->vgid || !vgnl->vg_name) {
log_error("vgnameid_list member allocation failed.");
return 0;
}
dm_list_add(vgnameids, &vgnl->list);
}
}
daemon_reply_destroy(reply);
return 1;
}
int lvmetad_vg_list_to_lvmcache(struct cmd_context *cmd)
{
struct volume_group *tmp;
@@ -897,7 +1019,8 @@ static int _lvmetad_pvscan_single(struct metadata_area *mda, void *baton)
struct _lvmetad_pvscan_baton *b = baton;
struct volume_group *this;
this = mda_is_ignored(mda) ? NULL : mda->ops->vg_read(b->fid, "", mda, NULL, NULL, 1);
if (!(this = mda_is_ignored(mda) ? NULL : mda->ops->vg_read(b->fid, "", mda, NULL, NULL, 1)))
return 1;
/* FIXME Also ensure contents match etc. */
if (!b->vg || this->seqno > b->vg->seqno)
@@ -908,6 +1031,100 @@ static int _lvmetad_pvscan_single(struct metadata_area *mda, void *baton)
return 1;
}
/*
* The lock manager may detect that the vg cached in lvmetad is out of date,
* due to something like an lvcreate from another host.
* This is limited to changes that only affect the vg (not global state like
* orphan PVs), so we only need to reread mdas on the vg's existing pvs.
*/
static struct volume_group *lvmetad_pvscan_vg(struct cmd_context *cmd, struct volume_group *vg)
{
struct volume_group *vg_ret = NULL;
struct dm_config_tree *vgmeta_ret = NULL;
struct dm_config_tree *vgmeta;
struct pv_list *pvl;
struct lvmcache_info *info;
struct format_instance *fid;
struct format_instance_ctx fic = { .type = 0 };
struct _lvmetad_pvscan_baton baton;
dm_list_iterate_items(pvl, &vg->pvs) {
/* missing pv */
if (!pvl->pv->dev)
continue;
if (!(info = lvmcache_info_from_pvid((const char *)&pvl->pv->id, 0))) {
log_error("Failed to find cached info for PV %s.", pv_dev_name(pvl->pv));
return NULL;
}
baton.vg = NULL;
baton.fid = lvmcache_fmt(info)->ops->create_instance(lvmcache_fmt(info), &fic);
if (!baton.fid)
return NULL;
if (baton.fid->fmt->features & FMT_OBSOLETE) {
log_error("WARNING: Ignoring obsolete format of metadata (%s) on device %s when using lvmetad",
baton.fid->fmt->name, dev_name(pvl->pv->dev));
lvmcache_fmt(info)->ops->destroy_instance(baton.fid);
return NULL;
}
lvmcache_foreach_mda(info, _lvmetad_pvscan_single, &baton);
if (!baton.vg) {
lvmcache_fmt(info)->ops->destroy_instance(baton.fid);
return NULL;
}
if (!(vgmeta = export_vg_to_config_tree(baton.vg))) {
log_error("VG export to config tree failed");
release_vg(baton.vg);
return NULL;
}
if (!vgmeta_ret) {
vgmeta_ret = vgmeta;
} else {
if (!compare_config(vgmeta_ret->root, vgmeta->root)) {
log_error("VG metadata comparison failed");
dm_config_destroy(vgmeta);
dm_config_destroy(vgmeta_ret);
release_vg(baton.vg);
return NULL;
}
dm_config_destroy(vgmeta);
}
release_vg(baton.vg);
}
if (vgmeta_ret) {
fid = lvmcache_fmt(info)->ops->create_instance(lvmcache_fmt(info), &fic);
if (!(vg_ret = import_vg_from_config_tree(vgmeta_ret, fid))) {
log_error("VG import from config tree failed");
lvmcache_fmt(info)->ops->destroy_instance(fid);
goto out;
}
/*
* Update lvmetad with the newly read version of the VG.
* The "precommitted" name is a misnomer in this case,
* but that is the field which lvmetad_vg_update() uses
* to send the metadata cft to lvmetad.
*/
vg_ret->cft_precommitted = vgmeta_ret;
if (!lvmetad_vg_update(vg_ret))
log_error("Failed to update lvmetad with new VG meta");
vg_ret->cft_precommitted = NULL;
dm_config_destroy(vgmeta_ret);
}
out:
return vg_ret;
}
int lvmetad_pvscan_single(struct cmd_context *cmd, struct device *dev,
activation_handler handler, int ignore_obsolete)
{
@@ -1057,3 +1274,327 @@ int lvmetad_pvscan_foreign_vgs(struct cmd_context *cmd, activation_handler handl
{
return _lvmetad_pvscan_all_devs(cmd, handler, 1);
}
int lvmetad_vg_clear_outdated_pvs(struct volume_group *vg)
{
char uuid[64];
daemon_reply reply;
int result;
if (!id_write_format(&vg->id, uuid, sizeof(uuid)))
return_0;
reply = _lvmetad_send("vg_clear_outdated_pvs", "vgid = %s", uuid, NULL);
result = _lvmetad_handle_reply(reply, "clear the list of outdated PVs", vg->name, NULL);
daemon_reply_destroy(reply);
return result;
}
/*
* Records the state of cached PVs in lvmetad so we can look for changes
* after rescanning.
*/
struct pv_cache_list {
struct dm_list list;
dev_t devt;
struct id pvid;
const char *vgid;
unsigned found : 1;
unsigned update_udev : 1;
};
/*
* Get the list of PVs known to lvmetad.
*/
static int _lvmetad_get_pv_cache_list(struct cmd_context *cmd, struct dm_list *pvc_list)
{
daemon_reply reply;
struct dm_config_node *cn;
struct pv_cache_list *pvcl;
const char *pvid_txt;
const char *vgid;
if (!lvmetad_active())
return 1;
log_debug_lvmetad("Asking lvmetad for complete list of known PVs");
reply = _lvmetad_send("pv_list", NULL);
if (!_lvmetad_handle_reply(reply, "list PVs", "", NULL)) {
log_error("lvmetad message failed.");
daemon_reply_destroy(reply);
return_0;
}
if ((cn = dm_config_find_node(reply.cft->root, "physical_volumes"))) {
for (cn = cn->child; cn; cn = cn->sib) {
if (!(pvcl = dm_pool_zalloc(cmd->mem, sizeof(*pvcl)))) {
log_error("pv_cache_list allocation failed.");
return 0;
}
pvid_txt = cn->key;
if (!id_read_format(&pvcl->pvid, pvid_txt)) {
stack;
continue;
}
pvcl->devt = dm_config_find_int(cn->child, "device", 0);
if ((vgid = dm_config_find_str(cn->child, "vgid", NULL)))
pvcl->vgid = dm_pool_strdup(cmd->mem, vgid);
dm_list_add(pvc_list, &pvcl->list);
}
}
daemon_reply_destroy(reply);
return 1;
}
/*
* Opening the device RDWR should trigger a udev db update.
* FIXME: is there a better way to update the udev db than
* doing an open/close of the device? - For example writing
* "change" to /sys/block/<device>/uevent?
*/
static void _update_pv_in_udev(struct cmd_context *cmd, dev_t devt)
{
struct device *dev;
log_debug_devs("device %d:%d open to update udev",
(int)MAJOR(devt), (int)MINOR(devt));
if (!(dev = dev_cache_get_by_devt(devt, cmd->lvmetad_filter))) {
log_error("_update_pv_in_udev no dev found");
return;
}
if (!dev_open(dev)) {
stack;
return;
}
if (!dev_close(dev))
stack;
}
/*
* Compare before and after PV lists from before/after rescanning,
* and update udev db for changes.
*
* For PVs that have changed pvid or vgid in lvmetad from rescanning,
* there may be information in the udev database to update, so open
* these devices to trigger a udev update.
*
* "before" refers to the list of pvs from lvmetad before rescanning
* "after" refers to the list of pvs from lvmetad after rescanning
*
* Comparing both lists, we can see which PVs changed (pvid or vgid),
* and trigger a udev db update for those.
*/
static void _update_changed_pvs_in_udev(struct cmd_context *cmd,
struct dm_list *pvc_before,
struct dm_list *pvc_after)
{
struct pv_cache_list *before;
struct pv_cache_list *after;
char id_before[ID_LEN + 1] __attribute__((aligned(8)));
char id_after[ID_LEN + 1] __attribute__((aligned(8)));
int found;
dm_list_iterate_items(before, pvc_before) {
found = 0;
dm_list_iterate_items(after, pvc_after) {
if (after->found)
continue;
if (before->devt != after->devt)
continue;
if (!id_equal(&before->pvid, &after->pvid)) {
memset(id_before, 0, sizeof(id_before));
memset(id_after, 0, sizeof(id_after));
strncpy(&id_before[0], (char *) &before->pvid, sizeof(id_before) - 1);
strncpy(&id_after[0], (char *) &after->pvid, sizeof(id_after) - 1);
log_debug_devs("device %d:%d changed pvid from %s to %s",
(int)MAJOR(before->devt), (int)MINOR(before->devt),
id_before, id_after);
before->update_udev = 1;
} else if ((before->vgid && !after->vgid) ||
(after->vgid && !before->vgid) ||
(before->vgid && after->vgid && strcmp(before->vgid, after->vgid))) {
log_debug_devs("device %d:%d changed vg from %s to %s",
(int)MAJOR(before->devt), (int)MINOR(before->devt),
before->vgid ?: "none", after->vgid ?: "none");
before->update_udev = 1;
}
after->found = 1;
before->found = 1;
found = 1;
break;
}
if (!found) {
memset(id_before, 0, sizeof(id_before));
strncpy(&id_before[0], (char *) &before->pvid, sizeof(id_before) - 1);
log_debug_devs("device %d:%d pvid %s vg %s is gone",
(int)MAJOR(before->devt), (int)MINOR(before->devt),
id_before, before->vgid ? before->vgid : "none");
before->update_udev = 1;
}
}
dm_list_iterate_items(before, pvc_before) {
if (before->update_udev)
_update_pv_in_udev(cmd, before->devt);
}
dm_list_iterate_items(after, pvc_after) {
if (after->update_udev)
_update_pv_in_udev(cmd, after->devt);
}
}
/*
* Before this command was run, some external entity may have
* invalidated lvmetad's cache of global information, e.g. lvmlockd.
*
* The global information includes things like a new VG, a
* VG that was removed, the assignment of a PV to a VG;
* any change that is not isolated within a single VG.
*
* The external entity, like a lock manager, would invalidate
* the lvmetad global cache if it detected that the global
* information had been changed on disk by something other
* than a local lvm command, e.g. an lvm command on another
* host with access to the same devices. (How it detects
* the change is specific to lock manager or other entity.)
*
* The effect is that metadata on disk is newer than the metadata
* in the local lvmetad daemon, and the local lvmetad's cache
* should be updated from disk before this command uses it.
*
* So, using this function, a command checks if lvmetad's global
* cache is valid. If so, it does nothing. If not, it rescans
* devices to update the lvmetad cache, then it notifies lvmetad
* that it's cache is valid again (consistent with what's on disk.)
* This command can then go ahead and use the newly refreshed metadata.
*
* 1. Check if the lvmetad global cache is invalid.
* 2. If so, reread metadata from all devices and update the lvmetad cache.
* 3. Tell lvmetad that the global cache is now valid.
*/
void lvmetad_validate_global_cache(struct cmd_context *cmd, int force)
{
struct dm_list pvc_before; /* pv_cache_list */
struct dm_list pvc_after; /* pv_cache_list */
daemon_reply reply;
int global_invalid;
dm_list_init(&pvc_before);
dm_list_init(&pvc_after);
if (!lvmlockd_use()) {
log_error(INTERNAL_ERROR "validate global cache without lvmlockd");
return;
}
if (!lvmetad_used())
return;
log_debug_lvmetad("Validating global lvmetad cache");
if (force)
goto do_scan;
reply = daemon_send_simple(_lvmetad, "get_global_info",
"token = %s", "skip",
NULL);
if (reply.error) {
log_error("lvmetad_validate_global_cache get_global_info error %d", reply.error);
goto do_scan;
}
if (strcmp(daemon_reply_str(reply, "response", ""), "OK")) {
log_error("lvmetad_validate_global_cache get_global_info not ok");
goto do_scan;
}
global_invalid = daemon_reply_int(reply, "global_invalid", -1);
daemon_reply_destroy(reply);
if (!global_invalid) {
/* cache is valid */
return;
}
do_scan:
/*
* Save the current state of pvs from lvmetad so after devices are
* scanned, we can compare to the new state to see if pvs changed.
*/
_lvmetad_get_pv_cache_list(cmd, &pvc_before);
/*
* Update the local lvmetad cache so it correctly reflects any
* changes made on remote hosts.
*/
lvmetad_pvscan_all_devs(cmd, NULL);
/*
* Clear the global_invalid flag in lvmetad.
* Subsequent local commands that read global state
* from lvmetad will not see global_invalid until
* another host makes another global change.
*/
reply = daemon_send_simple(_lvmetad, "set_global_info",
"token = %s", "skip",
"global_invalid = %d", 0,
NULL);
if (reply.error)
log_error("lvmetad_validate_global_cache set_global_info error %d", reply.error);
if (strcmp(daemon_reply_str(reply, "response", ""), "OK"))
log_error("lvmetad_validate_global_cache set_global_info not ok");
daemon_reply_destroy(reply);
/*
* Populate this command's lvmcache structures from lvmetad.
*/
lvmcache_seed_infos_from_lvmetad(cmd);
/*
* Update the local udev database to reflect PV changes from
* other hosts.
*
* Compare the before and after PV lists, and if a PV's
* pvid or vgid has changed, then open that device to trigger
* a uevent to update the udev db.
*
* This has no direct benefit to lvm, but is just a best effort
* attempt to keep the udev db updated and reflecting current
* lvm information.
*
* FIXME: lvmcache_seed_infos_from_lvmetad() and _lvmetad_get_pv_cache_list()
* each get pv_list from lvmetad, and they could share a single pv_list reply.
*/
if (!dm_list_empty(&pvc_before)) {
_lvmetad_get_pv_cache_list(cmd, &pvc_after);
_update_changed_pvs_in_udev(cmd, &pvc_before, &pvc_after);
}
}

24
lib/cache/lvmetad.h vendored
View File

@@ -29,8 +29,7 @@ typedef int (*activation_handler) (struct cmd_context *cmd,
#ifdef LVMETAD_SUPPORT
/*
* Initialise the communication with lvmetad. Normally called by
* lvmcache_init. Sets up a global handle for our process.
* Sets up a global handle for our process.
*/
void lvmetad_init(struct cmd_context *);
@@ -59,7 +58,9 @@ int lvmetad_socket_present(void);
/*
* Check whether lvmetad is active (where active means both that it is running
* and that we have a working connection with it).
* and that we have a working connection with it). It opens new connection
* with lvmetad in the process when lvmetad is supposed to be used and the
* connection is not open yet.
*/
int lvmetad_active(void);
@@ -70,8 +71,9 @@ int lvmetad_active(void);
void lvmetad_connect_or_warn(void);
/*
* Drop connection to lvmetad. A subsequent lvmetad_init() will re-establish
* the connection (possibly at a different socket path).
* Drop connection to lvmetad. A subsequent lvmetad_connect_or_warn or
* lvmetad_active will re-establish the connection (possibly at a
* different socket path).
*/
void lvmetad_disconnect(void);
@@ -142,6 +144,12 @@ int lvmetad_pv_lookup_by_dev(struct cmd_context *cmd, struct device *dev, int *f
*/
int lvmetad_vg_list_to_lvmcache(struct cmd_context *cmd);
/*
* Request a list of vgid/vgname pairs for all VGs known to lvmetad.
* Does not do vg_lookup's on each VG, and does not populate lvmcache.
*/
int lvmetad_get_vgnameids(struct cmd_context *cmd, struct dm_list *vgnameids);
/*
* Find a VG by its ID or its name in the lvmetad cache. Gives NULL if the VG is
* not found.
@@ -158,6 +166,9 @@ int lvmetad_pvscan_single(struct cmd_context *cmd, struct device *dev,
int lvmetad_pvscan_all_devs(struct cmd_context *cmd, activation_handler handler);
int lvmetad_pvscan_foreign_vgs(struct cmd_context *cmd, activation_handler handler);
int lvmetad_vg_clear_outdated_pvs(struct volume_group *vg);
void lvmetad_validate_global_cache(struct cmd_context *cmd, int force);
# else /* LVMETAD_SUPPORT */
# define lvmetad_init(cmd) do { } while (0)
@@ -179,10 +190,13 @@ int lvmetad_pvscan_foreign_vgs(struct cmd_context *cmd, activation_handler handl
# define lvmetad_pv_lookup(cmd, pvid, found) (0)
# define lvmetad_pv_lookup_by_dev(cmd, dev, found) (0)
# define lvmetad_vg_list_to_lvmcache(cmd) (1)
# define lvmetad_get_vgnameids(cmd, vgnameids) do { } while (0)
# define lvmetad_vg_lookup(cmd, vgname, vgid) (NULL)
# define lvmetad_pvscan_single(cmd, dev, handler, ignore_obsolete) (0)
# define lvmetad_pvscan_all_devs(cmd, handler) (0)
# define lvmetad_pvscan_foreign_vgs(cmd, handler) (0)
# define lvmetad_vg_clear_outdated_pvs(vg) (1)
# define lvmetad_validate_global_cache(cmd, force) do { } while (0)
# endif /* LVMETAD_SUPPORT */

View File

@@ -77,9 +77,13 @@ static int _cache_pool_text_import(struct lv_segment *seg,
return SEG_LOG_ERROR("policy must be a string in");
if (!(seg->policy_name = dm_pool_strdup(mem, str)))
return SEG_LOG_ERROR("Failed to duplicate policy in");
} else
} else {
/* Cannot use 'just' default, so pick one */
seg->policy_name = DEFAULT_CACHE_POOL_POLICY; /* FIXME make configurable */
/* FIXME maybe here should be always 'mq' */
log_warn("WARNING: cache_policy undefined, using default \"%s\" policy.",
seg->policy_name);
}
/*
* Read in policy args:
@@ -130,13 +134,17 @@ static int _cache_pool_text_export(const struct lv_segment *seg,
if (!(cache_mode = get_cache_pool_cachemode_name(seg)))
return_0;
if (!seg->policy_name) {
log_error(INTERNAL_ERROR "Policy name for %s is not defined.",
display_lvname(seg->lv));
return 0;
}
outf(f, "data = \"%s\"", seg_lv(seg, 0)->name);
outf(f, "metadata = \"%s\"", seg->metadata_lv->name);
outf(f, "chunk_size = %" PRIu32, seg->chunk_size);
outf(f, "cache_mode = \"%s\"", cache_mode);
if (seg->policy_name)
outf(f, "policy = \"%s\"", seg->policy_name);
outf(f, "policy = \"%s\"", seg->policy_name);
if (seg->policy_settings) {
if (strcmp(seg->policy_settings->key, "policy_settings")) {
@@ -282,9 +290,16 @@ static int _cache_add_target_line(struct dev_manager *dm,
struct dm_tree_node *node, uint64_t len,
uint32_t *pvmove_mirror_count __attribute__((unused)))
{
struct lv_segment *cache_pool_seg = first_seg(seg->pool_lv);
struct lv_segment *cache_pool_seg;
char *metadata_uuid, *data_uuid, *origin_uuid;
if (!seg->pool_lv || !seg_is_cache(seg)) {
log_error(INTERNAL_ERROR "Passed segment is not cache.");
return 0;
}
cache_pool_seg = first_seg(seg->pool_lv);
if (!(metadata_uuid = build_dm_uuid(mem, cache_pool_seg->metadata_lv, NULL)))
return_0;

View File

@@ -30,6 +30,7 @@
#include "lvmcache.h"
#include "lvmetad.h"
#include "archiver.h"
#include "lvmpolld-client.h"
#ifdef HAVE_LIBDL
#include "sharedlib.h"
@@ -244,8 +245,10 @@ static int _parse_debug_classes(struct cmd_context *cmd)
const struct dm_config_value *cv;
int debug_classes = 0;
if (!(cn = find_config_tree_node(cmd, log_debug_classes_CFG, NULL)))
return DEFAULT_LOGGED_DEBUG_CLASSES;
if (!(cn = find_config_tree_array(cmd, log_debug_classes_CFG, NULL))) {
log_error(INTERNAL_ERROR "Unable to find configuration for log/debug_classes.");
return -1;
}
for (cv = cn->v; cv; cv = cv->next) {
if (cv->type != DM_CFG_STRING) {
@@ -273,6 +276,8 @@ static int _parse_debug_classes(struct cmd_context *cmd)
debug_classes |= LOG_CLASS_CACHE;
else if (!strcasecmp(cv->v.str, "locking"))
debug_classes |= LOG_CLASS_LOCKING;
else if (!strcasecmp(cv->v.str, "lvmpolld"))
debug_classes |= LOG_CLASS_LVMPOLLD;
else
log_verbose("Unrecognised value for log/debug_classes: %s", cv->v.str);
}
@@ -410,6 +415,57 @@ static int _check_config(struct cmd_context *cmd)
return 1;
}
static const char *_set_time_format(struct cmd_context *cmd)
{
/* Compared to strftime, we do not allow "newline" character - the %n in format. */
static const char *allowed_format_chars = "aAbBcCdDeFGghHIjklmMpPrRsStTuUVwWxXyYzZ%";
static const char *allowed_alternative_format_chars_e = "cCxXyY";
static const char *allowed_alternative_format_chars_o = "deHImMSuUVwWy";
static const char *chars_to_check;
const char *tf = find_config_tree_str(cmd, report_time_format_CFG, NULL);
const char *p_fmt;
size_t i;
char c;
if (!*tf) {
log_error("Configured time format is empty string.");
goto bad;
} else {
p_fmt = tf;
while ((c = *p_fmt)) {
if (c == '%') {
c = *++p_fmt;
if (c == 'E') {
c = *++p_fmt;
chars_to_check = allowed_alternative_format_chars_e;
} else if (c == 'O') {
c = *++p_fmt;
chars_to_check = allowed_alternative_format_chars_o;
} else
chars_to_check = allowed_format_chars;
for (i = 0; chars_to_check[i]; i++) {
if (c == chars_to_check[i])
break;
}
if (!chars_to_check[i])
goto_bad;
}
else if (isprint(c))
p_fmt++;
else {
log_error("Configured time format contains non-printable characters.");
goto bad;
}
}
}
return tf;
bad:
log_error("Invalid time format \"%s\" supplied.", tf);
return NULL;
}
int process_profilable_config(struct cmd_context *cmd)
{
if (!(cmd->default_settings.unit_factor =
@@ -423,6 +479,8 @@ int process_profilable_config(struct cmd_context *cmd)
cmd->report_binary_values_as_numeric = find_config_tree_bool(cmd, report_binary_values_as_numeric_CFG, NULL);
cmd->default_settings.suffix = find_config_tree_bool(cmd, global_suffix_CFG, NULL);
cmd->report_list_item_separator = find_config_tree_str(cmd, report_list_item_separator_CFG, NULL);
if (!(cmd->time_format = _set_time_format(cmd)))
return 0;
return 1;
}
@@ -475,6 +533,7 @@ static int _process_config(struct cmd_context *cmd)
const struct dm_config_value *cv;
int64_t pv_min_kb;
const char *lvmetad_socket;
const char *lvmpolld_socket;
int udev_disabled = 0;
char sysfs_dir[PATH_MAX];
@@ -595,7 +654,7 @@ static int _process_config(struct cmd_context *cmd)
}
}
if ((cn = find_config_tree_node(cmd, activation_mlock_filter_CFG, NULL)))
if ((cn = find_config_tree_array(cmd, activation_mlock_filter_CFG, NULL)))
for (cv = cn->v; cv; cv = cv->next)
if ((cv->type != DM_CFG_STRING) || !cv->v.str[0])
log_error("Ignoring invalid activation/mlock_filter entry in config file");
@@ -618,6 +677,7 @@ static int _process_config(struct cmd_context *cmd)
(find_config_tree_bool(cmd, global_detect_internal_vg_cache_corruption_CFG, NULL));
lvmetad_disconnect();
lvmpolld_disconnect();
lvmetad_socket = getenv("LVM_LVMETAD_SOCKET");
if (!lvmetad_socket)
@@ -628,7 +688,7 @@ static int _process_config(struct cmd_context *cmd)
DEFAULT_RUN_DIR "/lvmetad.socket");
*/
lvmetad_set_socket(lvmetad_socket);
cn = find_config_tree_node(cmd, devices_global_filter_CFG, NULL);
cn = find_config_tree_array(cmd, devices_global_filter_CFG, NULL);
lvmetad_set_token(cn ? cn->v : NULL);
if (find_config_tree_int(cmd, global_locking_type_CFG, NULL) == 3 &&
@@ -644,6 +704,13 @@ static int _process_config(struct cmd_context *cmd)
if (!_init_system_id(cmd))
return_0;
lvmpolld_socket = getenv("LVM_LVMPOLLD_SOCKET");
if (!lvmpolld_socket)
lvmpolld_socket = DEFAULT_RUN_DIR "/lvmpolld.socket";
lvmpolld_set_socket(lvmpolld_socket);
lvmpolld_set_active(find_config_tree_bool(cmd, global_use_lvmpolld_CFG, NULL));
return 1;
}
@@ -950,15 +1017,9 @@ static int _init_dev_cache(struct cmd_context *cmd)
init_obtain_device_list_from_udev(device_list_from_udev);
if (!(cn = find_config_tree_node(cmd, devices_scan_CFG, NULL))) {
if (!dev_cache_add_dir("/dev")) {
log_error("Failed to add /dev to internal "
"device cache");
return 0;
}
log_verbose("device/scan not in config file: "
"Defaulting to /dev");
return 1;
if (!(cn = find_config_tree_array(cmd, devices_scan_CFG, NULL))) {
log_error(INTERNAL_ERROR "Unable to find configuration for devices/scan.");
return_0;
}
for (cv = cn->v; cv; cv = cv->next) {
@@ -996,7 +1057,7 @@ static int _init_dev_cache(struct cmd_context *cmd)
}
}
if (!(cn = find_config_tree_node(cmd, devices_loopfiles_CFG, NULL)))
if (!(cn = find_config_tree_array(cmd, devices_loopfiles_CFG, NULL)))
return 1;
for (cv = cn->v; cv; cv = cv->next) {
@@ -1171,7 +1232,7 @@ static int _init_filters(struct cmd_context *cmd, unsigned load_persistent_cache
}
/* filter component 1 */
if ((cn = find_config_tree_node(cmd, devices_filter_CFG, NULL))) {
if ((cn = find_config_tree_array(cmd, devices_filter_CFG, NULL))) {
if (!(filter_components[1] = regex_filter_create(cn->v)))
goto_bad;
/* we have two filter components - create composite filter */
@@ -1288,7 +1349,7 @@ static int _init_formats(struct cmd_context *cmd)
#ifdef HAVE_LIBDL
/* Load any formats in shared libs if not static */
if (!is_static() &&
(cn = find_config_tree_node(cmd, global_format_libraries_CFG, NULL))) {
(cn = find_config_tree_array(cmd, global_format_libraries_CFG, NULL))) {
const struct dm_config_value *cv;
struct format_type *(*init_format_fn) (struct cmd_context *);
@@ -1454,7 +1515,7 @@ static int _init_segtypes(struct cmd_context *cmd)
#ifdef HAVE_LIBDL
/* Load any formats in shared libs unless static */
if (!is_static() &&
(cn = find_config_tree_node(cmd, global_segment_libraries_CFG, NULL))) {
(cn = find_config_tree_array(cmd, global_segment_libraries_CFG, NULL))) {
const struct dm_config_value *cv;
int (*init_multiple_segtypes_fn) (struct cmd_context *,
@@ -1760,7 +1821,7 @@ struct cmd_context *create_toolcontext(unsigned is_long_lived,
goto_out;
if (!(cmd->dev_types = create_dev_types(cmd->proc_dir,
find_config_tree_node(cmd, devices_types_CFG, NULL))))
find_config_tree_array(cmd, devices_types_CFG, NULL))))
goto_out;
if (!_init_dev_cache(cmd))
@@ -1975,7 +2036,7 @@ int refresh_toolcontext(struct cmd_context *cmd)
return_0;
if (!(cmd->dev_types = create_dev_types(cmd->proc_dir,
find_config_tree_node(cmd, devices_types_CFG, NULL))))
find_config_tree_array(cmd, devices_types_CFG, NULL))))
return_0;
if (!_init_dev_cache(cmd))
@@ -2065,6 +2126,7 @@ void destroy_toolcontext(struct cmd_context *cmd)
lvmetad_release_token();
lvmetad_disconnect();
lvmpolld_disconnect();
release_log_memory();
activation_exit();

View File

@@ -95,11 +95,18 @@ struct cmd_context {
unsigned ignore_clustered_vgs:1;
unsigned threaded:1; /* Set if running within a thread e.g. clvmd */
const char *time_format;
unsigned independent_metadata_areas:1; /* Active formats have MDAs outside PVs */
unsigned unknown_system_id:1;
unsigned include_foreign_vgs:1;
unsigned include_active_foreign_vgs:1;
unsigned error_foreign_vgs:1;
unsigned include_foreign_vgs:1; /* report/display cmds can reveal foreign VGs */
unsigned include_shared_vgs:1; /* report/display cmds can reveal lockd VGs */
unsigned include_active_foreign_vgs:1; /* cmd should process foreign VGs with active LVs */
unsigned vg_read_print_access_error:1; /* print access errors from vg_read */
unsigned lockd_gl_disable:1;
unsigned lockd_vg_disable:1;
unsigned lockd_lv_disable:1;
unsigned lockd_vg_default_sh:1;
struct dev_types *dev_types;
@@ -146,6 +153,8 @@ struct cmd_context {
char system_dir[PATH_MAX];
char dev_dir[PATH_MAX];
char proc_dir[PATH_MAX];
char display_buffer[NAME_LEN * 10]; /* Ring buffer for upto 10 longest vg/lv names */
unsigned display_lvname_idx; /* Index to ring buffer */
};
/*

View File

@@ -65,11 +65,11 @@ struct config_source {
* Map each ID to respective definition of the configuration item.
*/
static struct cfg_def_item _cfg_def_items[CFG_COUNT + 1] = {
#define cfg_section(id, name, parent, flags, since_version, comment) {id, parent, name, CFG_TYPE_SECTION, {0}, flags, since_version, comment},
#define cfg(id, name, parent, flags, type, default_value, since_version, comment) {id, parent, name, type, {.v_##type = default_value}, flags, since_version, comment},
#define cfg_runtime(id, name, parent, flags, type, since_version, comment) {id, parent, name, type, {.fn_##type = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, comment},
#define cfg_array(id, name, parent, flags, types, default_value, since_version, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.v_CFG_TYPE_STRING = default_value}, flags, since_version, comment},
#define cfg_array_runtime(id, name, parent, flags, types, since_version, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.fn_CFG_TYPE_STRING = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, comment},
#define cfg_section(id, name, parent, flags, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_SECTION, {0}, flags, since_version, {0}, deprecated_since_version, deprecation_comment, comment},
#define cfg(id, name, parent, flags, type, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.v_##type = default_value}, flags, since_version, {.v_UNCONFIGURED = unconfigured_value}, deprecated_since_version, deprecation_comment, comment},
#define cfg_runtime(id, name, parent, flags, type, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.fn_##type = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, deprecation_comment, comment},
#define cfg_array(id, name, parent, flags, types, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.v_CFG_TYPE_STRING = default_value}, flags, since_version, {.v_UNCONFIGURED = unconfigured_value}, deprecated_since_version, deprecation_comment, comment},
#define cfg_array_runtime(id, name, parent, flags, types, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.fn_CFG_TYPE_STRING = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, deprecation_comment, comment},
#include "config_settings.h"
#undef cfg_section
#undef cfg
@@ -604,6 +604,7 @@ struct timespec config_file_timestamp(struct dm_config_tree *cft)
}
#define cfg_def_get_item_p(id) (&_cfg_def_items[id])
#define cfg_def_get_default_unconfigured_value_hint(cmd,item) ((item->flags & CFG_DEFAULT_RUN_TIME) ? item->default_unconfigured_value.fn_UNCONFIGURED(cmd) : item->default_unconfigured_value.v_UNCONFIGURED)
#define cfg_def_get_default_value_hint(cmd,item,type,profile) ((item->flags & CFG_DEFAULT_RUN_TIME) ? item->default_value.fn_##type(cmd,profile) : item->default_value.v_##type)
#define cfg_def_get_default_value(cmd,item,type,profile) (item->flags & CFG_DEFAULT_UNDEFINED ? 0 : cfg_def_get_default_value_hint(cmd,item,type,profile))
@@ -665,22 +666,28 @@ static void _log_type_error(const char *path, cfg_def_type_t actual,
actual_type_name, expected_type_name);
}
static struct dm_config_value *_get_def_array_values(struct dm_config_tree *cft,
const cfg_def_item_t *def)
static struct dm_config_value *_get_def_array_values(struct cmd_context *cmd,
struct dm_config_tree *cft,
const cfg_def_item_t *def,
uint32_t format_flags)
{
const char *def_enc_value;
char *enc_value, *token, *p, *r;
struct dm_config_value *array = NULL, *v = NULL, *oldv = NULL;
if (!def->default_value.v_CFG_TYPE_STRING) {
def_enc_value = cfg_def_get_default_value(cmd, def, CFG_TYPE_ARRAY, NULL);
if (!def_enc_value) {
if (!(array = dm_config_create_value(cft))) {
log_error("Failed to create default empty array for %s.", def->name);
return NULL;
}
array->type = DM_CFG_EMPTY_ARRAY;
dm_config_value_set_format_flags(array, format_flags);
return array;
}
if (!(p = token = enc_value = dm_strdup(def->default_value.v_CFG_TYPE_STRING))) {
if (!(p = token = enc_value = dm_strdup(def_enc_value))) {
log_error("_get_def_array_values: dm_strdup failed");
return NULL;
}
@@ -709,6 +716,9 @@ static struct dm_config_value *_get_def_array_values(struct dm_config_tree *cft,
dm_free(enc_value);
return NULL;
}
dm_config_value_set_format_flags(v, format_flags);
if (oldv)
oldv->next = v;
if (!array)
@@ -825,6 +835,12 @@ static int _check_value_differs_from_default(struct cft_check_handle *handle,
float f;
const char *str;
if ((handle->ignoreunsupported && (def->flags & CFG_UNSUPPORTED)) ||
(handle->ignoreadvanced && (def->flags & CFG_ADVANCED))) {
diff = 0;
goto out;
}
/* if default value is undefined, the value used differs from default */
if (def->flags & CFG_DEFAULT_UNDEFINED) {
diff = 1;
@@ -832,7 +848,7 @@ static int _check_value_differs_from_default(struct cft_check_handle *handle,
}
if (!v_def && (def->type & CFG_TYPE_ARRAY)) {
if (!(v_def_array = v_def_iter = _get_def_array_values(handle->cft, def)))
if (!(v_def_array = v_def_iter = _get_def_array_values(handle->cmd, handle->cft, def, 0)))
return_0;
do {
/* iterate over each element of the array and check its value */
@@ -1348,6 +1364,106 @@ int find_config_tree_bool(struct cmd_context *cmd, int id, struct profile *profi
return b;
}
static struct dm_config_node *_get_array_def_node(struct cmd_context *cmd,
cfg_def_item_t *def,
struct profile *profile)
{
struct dm_config_node *cn;
if (def->flags & CFG_DEFAULT_UNDEFINED)
return NULL;
if (!(cn = dm_config_create_node(cmd->cft, def->name))) {
log_error("Failed to create default array node for %s.", def->name);
return NULL;
}
if (!(cn->v = _get_def_array_values(cmd, cmd->cft, def, 0))) {
dm_pool_free(cmd->cft->mem, cn);
return_NULL;
}
return cn;
}
struct _config_array_out_handle {
struct dm_pool *mem;
char *str;
};
static int _config_array_line(const struct dm_config_node *cn, const char *line, void *baton)
{
struct _config_array_out_handle *handle = (struct _config_array_out_handle *) baton;
if (!(handle->str = dm_pool_strdup(handle->mem, line))) {
log_error("_config_array_line: dm_pool_strdup failed");
return 0;
}
return 1;
}
static void _log_array_value_used(struct dm_pool *mem, const struct dm_config_node *cn,
const char *path, int default_used)
{
struct _config_array_out_handle out_handle = { 0 };
struct dm_config_node_out_spec out_spec = { 0 };
uint32_t old_format_flags;
out_handle.mem = mem;
out_spec.line_fn = _config_array_line;
old_format_flags = dm_config_value_get_format_flags(cn->v);
dm_config_value_set_format_flags(cn->v,
DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACES |
DM_CONFIG_VALUE_FMT_COMMON_ARRAY);
if (!dm_config_write_one_node_out(cn, &out_spec, &out_handle)) {
log_error("_log_array_value_used: failed to write node value");
out_handle.mem = NULL;
}
if (default_used)
log_very_verbose("%s not found in config: defaulting to %s",
path, out_handle.mem ? out_handle.str : "<unknown>");
else
log_very_verbose("Setting %s to %s",
path, out_handle.mem ? out_handle.str : "<unknown>");
if (out_handle.mem)
dm_pool_free(out_handle.mem, out_handle.str);
dm_config_value_set_format_flags(cn->v, old_format_flags);
}
const struct dm_config_node *find_config_tree_array(struct cmd_context *cmd, int id, struct profile *profile)
{
cfg_def_item_t *item = cfg_def_get_item_p(id);
char path[CFG_PATH_MAX_LEN];
int profile_applied;
const struct dm_config_node *cn = NULL, *cn_def = NULL;
profile_applied = _apply_local_profile(cmd, profile);
_cfg_def_make_path(path, sizeof(path), item->id, item, 0);
if (!(item->type & CFG_TYPE_ARRAY))
log_error(INTERNAL_ERROR "%s cfg tree element not declared as array.", path);
if (_config_disabled(cmd, item, path) ||
!(cn = find_config_tree_node(cmd, id, profile)))
cn_def = _get_array_def_node(cmd, item, profile);
if (cn)
_log_array_value_used(cmd->cft->mem, cn, path, 0);
else if (cn_def) {
_log_array_value_used(cmd->cft->mem, cn_def, path, 1);
cn = cn_def;
}
if (profile_applied)
remove_config_tree_by_source(cmd, profile->source);
return cn;
}
/* Insert cn2 after cn1 */
static void _insert_config_node(struct dm_config_node **cn1,
struct dm_config_node *cn2)
@@ -1488,6 +1604,55 @@ struct out_baton {
struct dm_pool *mem;
};
#define MAX_COMMENT_LINE 512
static int _copy_one_line(const char *comment, char *line, int *pos, int len)
{
int p;
int i = 0;
char c;
if (*pos >= len)
return 0;
memset(line, 0, MAX_COMMENT_LINE+1);
for (p = *pos; ; p++) {
c = comment[p];
(*pos)++;
if (c == '\n' || c == '\0')
break;
line[i++] = c;
if (i == MAX_COMMENT_LINE)
break;
}
return i;
}
static int _get_config_node_version(uint16_t version_enc, char *version)
{
if (dm_snprintf(version, 9, "%u.%u.%u",
(version_enc & 0xE000) >> 13,
(version_enc & 0x1E00) >> 9,
(version_enc & 0x1FF)) == -1) {
log_error("_get_config_node_version: couldn't create version string");
return 0;
}
return 1;
}
static int _def_node_is_deprecated(cfg_def_item_t *def, struct config_def_tree_spec *spec)
{
return def->deprecated_since_version &&
(spec->version >= def->deprecated_since_version);
}
static int _out_prefix_fn(const struct dm_config_node *cn, const char *line, void *baton)
{
struct out_baton *out = baton;
@@ -1495,7 +1660,7 @@ static int _out_prefix_fn(const struct dm_config_node *cn, const char *line, voi
char version[9]; /* 8+1 chars for max version of 7.15.511 */
const char *node_type_name = cn->v ? "option" : "section";
char path[CFG_PATH_MAX_LEN];
char commentline[MAX_COMMENT_LINE+1];
if (cn->id < 0)
return 1;
@@ -1505,18 +1670,36 @@ static int _out_prefix_fn(const struct dm_config_node *cn, const char *line, voi
return 0;
}
if (out->tree_spec->type == CFG_DEF_TREE_LIST)
return 1;
if ((out->tree_spec->type == CFG_DEF_TREE_DIFF) &&
(!(out->tree_spec->check_status[cn->id] & CFG_DIFF)))
return 1;
cfg_def = cfg_def_get_item_p(cn->id);
if (out->tree_spec->withcomments) {
if (out->tree_spec->withsummary || out->tree_spec->withcomments) {
_cfg_def_make_path(path, sizeof(path), cfg_def->id, cfg_def, 1);
fprintf(out->fp, "\n");
fprintf(out->fp, "%s# Configuration %s %s.\n", line, node_type_name, path);
if (cfg_def->comment)
fprintf(out->fp, "%s# %s\n", line, cfg_def->comment);
if (out->tree_spec->withcomments &&
_def_node_is_deprecated(cfg_def, out->tree_spec))
fprintf(out->fp, "%s# %s", line, cfg_def->deprecation_comment);
if (cfg_def->comment) {
int pos = 0;
while (_copy_one_line(cfg_def->comment, commentline, &pos, strlen(cfg_def->comment))) {
fprintf(out->fp, "%s# %s\n", line, commentline);
/* withsummary prints only the first comment line. */
if (!out->tree_spec->withcomments)
break;
}
}
if (_def_node_is_deprecated(cfg_def, out->tree_spec))
fprintf(out->fp, "%s# This configuration %s is deprecated.\n", line, node_type_name);
if (cfg_def->flags & CFG_ADVANCED)
fprintf(out->fp, "%s# This configuration %s is advanced.\n", line, node_type_name);
@@ -1529,34 +1712,98 @@ static int _out_prefix_fn(const struct dm_config_node *cn, const char *line, voi
if (cfg_def->flags & CFG_DEFAULT_UNDEFINED)
fprintf(out->fp, "%s# This configuration %s does not have a default value defined.\n", line, node_type_name);
if ((out->tree_spec->type == CFG_DEF_TREE_FULL) &&
(out->tree_spec->check_status[cn->id] & CFG_USED))
fprintf(out->fp, "%s# Value defined in existing configuration has been used for this setting.\n", line);
}
if (out->tree_spec->withversions) {
if (dm_snprintf(version, 9, "%u.%u.%u",
(cfg_def->since_version & 0xE000) >> 13,
(cfg_def->since_version & 0x1E00) >> 9,
(cfg_def->since_version & 0x1FF)) == -1) {
log_error("_out_prefix_fn: couldn't create version string");
return 0;
if (!_get_config_node_version(cfg_def->since_version, version))
return_0;
fprintf(out->fp, "%s# Available since version %s.\n", line, version);
if (_def_node_is_deprecated(cfg_def, out->tree_spec)) {
if (!_get_config_node_version(cfg_def->deprecated_since_version, version))
return_0;
fprintf(out->fp, "%s# Deprecated since version %s.\n", line, version);
}
fprintf(out->fp, "%s# Since version %s.\n", line, version);
}
return 1;
}
static int _should_print_cfg_with_undef_def_val(struct out_baton *out, cfg_def_item_t *cfg_def,
const struct dm_config_node *cn)
{
if (!(cfg_def->flags & CFG_DEFAULT_UNDEFINED))
return 1;
/* print it only if the value is directly defined in some config = it's used */
return out->tree_spec->check_status && (out->tree_spec->check_status[cn->id] & CFG_USED);
}
static int _out_line_fn(const struct dm_config_node *cn, const char *line, void *baton)
{
struct out_baton *out = baton;
struct cfg_def_item *cfg_def = cfg_def_get_item_p(cn->id);
struct cfg_def_item *cfg_def;
char config_path[CFG_PATH_MAX_LEN];
char summary[MAX_COMMENT_LINE+1];
char version[9];
int pos = 0;
size_t len;
char *space_prefix;
if ((out->tree_spec->type == CFG_DEF_TREE_DIFF) &&
(!(out->tree_spec->check_status[cn->id] & CFG_DIFF)))
return 1;
fprintf(out->fp, "%s%s\n", (out->tree_spec->type != CFG_DEF_TREE_CURRENT) &&
(out->tree_spec->type != CFG_DEF_TREE_DIFF) &&
(cfg_def->flags & CFG_DEFAULT_UNDEFINED) ? "#" : "", line);
cfg_def = cfg_def_get_item_p(cn->id);
if (out->tree_spec->type == CFG_DEF_TREE_LIST) {
/* List view with node paths and summary. */
if (cfg_def->type & CFG_TYPE_SECTION)
return 1;
if (!_cfg_def_make_path(config_path, CFG_PATH_MAX_LEN, cfg_def->id, cfg_def, 1))
return_0;
if (out->tree_spec->withversions && !_get_config_node_version(cfg_def->since_version, version))
return_0;
summary[0] = '\0';
if (out->tree_spec->withsummary && cfg_def->comment)
_copy_one_line(cfg_def->comment, summary, &pos, strlen(cfg_def->comment));
fprintf(out->fp, "%s%s%s%s%s%s%s\n", config_path,
*summary || out->tree_spec->withversions ? " - ": "",
*summary ? summary : "",
*summary ? " " : "",
out->tree_spec->withversions ? "[" : "",
out->tree_spec->withversions ? version : "",
out->tree_spec->withversions ? "]" : "");
return 1;
}
/* Usual tree view with nodes and their values. */
if ((out->tree_spec->type != CFG_DEF_TREE_CURRENT) &&
(out->tree_spec->type != CFG_DEF_TREE_DIFF) &&
(out->tree_spec->type != CFG_DEF_TREE_FULL) &&
(cfg_def->flags & (CFG_DEFAULT_UNDEFINED | CFG_DEFAULT_COMMENTED))) {
/* print with # at the front to comment out the line */
if (_should_print_cfg_with_undef_def_val(out, cfg_def, cn)) {
space_prefix = ((len = strspn(line, "\t "))) ? dm_pool_strndup(out->mem, line, len) : NULL;
fprintf(out->fp, "%s%s%s\n", space_prefix ? : "", "# ", line + len);
if (space_prefix)
dm_pool_free(out->mem, space_prefix);
}
return 1;
}
/* print the line as it is */
if (_should_print_cfg_with_undef_def_val(out, cfg_def, cn))
fprintf(out->fp, "%s\n", line);
return 1;
}
@@ -1624,20 +1871,31 @@ static struct dm_config_node *_add_def_node(struct dm_config_tree *cft,
{
struct dm_config_node *cn;
const char *str;
uint32_t format_flags = 0;
if (!(cn = dm_config_create_node(cft, def->name))) {
log_error("Failed to create default config setting node.");
return NULL;
}
if (!(def->type & CFG_TYPE_SECTION) && (!(cn->v = dm_config_create_value(cft)))) {
log_error("Failed to create default config setting node value.");
return NULL;
if (!(def->type & CFG_TYPE_SECTION) && !(def->type & CFG_TYPE_ARRAY)) {
if (!(cn->v = dm_config_create_value(cft))) {
log_error("Failed to create default config setting node value.");
return NULL;
}
if (spec->withspaces)
format_flags |= DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACES;
}
cn->id = def->id;
if (!(def->type & CFG_TYPE_ARRAY)) {
if (spec->unconfigured && def->default_unconfigured_value.v_UNCONFIGURED) {
cn->v->type = DM_CFG_STRING;
cn->v->v.str = cfg_def_get_default_unconfigured_value_hint(spec->cmd, def);
if (def->type != CFG_TYPE_STRING)
format_flags |= DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES;
dm_config_value_set_format_flags(cn->v, format_flags);
} else if (!(def->type & CFG_TYPE_ARRAY)) {
switch (def->type) {
case CFG_TYPE_SECTION:
cn->v = NULL;
@@ -1649,6 +1907,8 @@ static struct dm_config_node *_add_def_node(struct dm_config_tree *cft,
case CFG_TYPE_INT:
cn->v->type = DM_CFG_INT;
cn->v->v.i = cfg_def_get_default_value_hint(spec->cmd, def, CFG_TYPE_INT, NULL);
if (def->flags & CFG_FORMAT_INT_OCTAL)
format_flags |= DM_CONFIG_VALUE_FMT_INT_OCTAL;
break;
case CFG_TYPE_FLOAT:
cn->v->type = DM_CFG_FLOAT;
@@ -1665,8 +1925,13 @@ static struct dm_config_node *_add_def_node(struct dm_config_tree *cft,
return NULL;
break;
}
} else
cn->v = _get_def_array_values(cft, def);
dm_config_value_set_format_flags(cn->v, format_flags);
} else {
if (spec->withspaces)
format_flags |= DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACES;
format_flags |= DM_CONFIG_VALUE_FMT_COMMON_ARRAY;
cn->v = _get_def_array_values(spec->cmd, cft, def, format_flags);
}
cn->child = NULL;
if (parent) {
@@ -1682,6 +1947,11 @@ static struct dm_config_node *_add_def_node(struct dm_config_tree *cft,
return cn;
}
static int _should_skip_deprecated_def_node(cfg_def_item_t *def, struct config_def_tree_spec *spec)
{
return spec->ignoredeprecated && _def_node_is_deprecated(def, spec);
}
static int _should_skip_def_node(struct config_def_tree_spec *spec, int section_id, int id)
{
cfg_def_item_t *def = cfg_def_get_item_p(id);
@@ -1693,6 +1963,8 @@ static int _should_skip_def_node(struct config_def_tree_spec *spec, int section_
return 1;
switch (spec->type) {
case CFG_DEF_TREE_FULL:
/* fall through */
case CFG_DEF_TREE_MISSING:
if (!spec->check_status) {
log_error_once(INTERNAL_ERROR "couldn't determine missing "
@@ -1700,19 +1972,27 @@ static int _should_skip_def_node(struct config_def_tree_spec *spec, int section_
return 1;
}
if ((spec->check_status[id] & CFG_USED) ||
(def->flags & CFG_NAME_VARIABLE) ||
(def->since_version > spec->version))
(def->flags & CFG_NAME_VARIABLE))
return 1;
if ((spec->type == CFG_DEF_TREE_MISSING) &&
((def->since_version > spec->version) ||
_should_skip_deprecated_def_node(def, spec)))
return 1;
break;
case CFG_DEF_TREE_NEW:
if (def->since_version != spec->version)
if ((def->since_version != spec->version) ||
_should_skip_deprecated_def_node(def, spec))
return 1;
break;
case CFG_DEF_TREE_PROFILABLE:
/* fall through */
case CFG_DEF_TREE_PROFILABLE_CMD:
/* fall through */
case CFG_DEF_TREE_PROFILABLE_MDA:
if (!(def->flags & CFG_PROFILABLE) ||
(def->since_version > spec->version))
(def->since_version > spec->version) ||
_should_skip_deprecated_def_node(def, spec))
return 1;
flags = def->flags & ~CFG_PROFILABLE;
if (spec->type == CFG_DEF_TREE_PROFILABLE_CMD) {
@@ -1724,7 +2004,8 @@ static int _should_skip_def_node(struct config_def_tree_spec *spec, int section_
}
break;
default:
if (def->since_version > spec->version)
if ((def->since_version > spec->version) ||
_should_skip_deprecated_def_node(def, spec))
return 1;
break;
}
@@ -1763,7 +2044,7 @@ bad:
struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec)
{
struct dm_config_tree *cft;
struct dm_config_tree *cft = NULL, *tmp_cft = NULL;
struct dm_config_node *root = NULL, *relay = NULL, *tmp;
int id;
@@ -1776,6 +2057,9 @@ struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec)
if (cfg_def_get_item_p(id)->parent != root_CFG_SECTION)
continue;
if (spec->ignorelocal && (id == local_CFG_SECTION))
continue;
if ((tmp = _add_def_section_subtree(cft, spec, root, relay, id))) {
relay = tmp;
if (!root)
@@ -1784,7 +2068,33 @@ struct dm_config_tree *config_def_create_tree(struct config_def_tree_spec *spec)
}
cft->root = root;
if (spec->type == CFG_DEF_TREE_FULL) {
if (!(tmp_cft = dm_config_create())) {
log_error("Failed to create temporary config tree while creating full tree.");
goto bad;
}
if (!(tmp_cft->root = dm_config_clone_node_with_mem(cft->mem, spec->current_cft->root, 1))) {
log_error("Failed to clone current config tree.");
goto bad;
}
if (!merge_config_tree(spec->cmd, cft, tmp_cft, CONFIG_MERGE_TYPE_RAW)) {
log_error("Failed to merge default and current config tree.");
goto bad;
}
dm_config_destroy(tmp_cft);
}
return cft;
bad:
if (cft)
dm_config_destroy(cft);
if (tmp_cft)
dm_config_destroy(tmp_cft);
return NULL;
}
static int _check_profile(struct cmd_context *cmd, struct profile *profile)
@@ -1963,6 +2273,11 @@ const char *get_default_devices_cache_dir_CFG(struct cmd_context *cmd, struct pr
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_unconfigured_devices_cache_dir_CFG(struct cmd_context *cmd)
{
return "@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@";
}
const char *get_default_devices_cache_CFG(struct cmd_context *cmd, struct profile *profile)
{
const char *cache_dir = NULL, *cache_file_prefix = NULL;
@@ -1997,6 +2312,24 @@ const char *get_default_devices_cache_CFG(struct cmd_context *cmd, struct profil
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_unconfigured_devices_cache_CFG(struct cmd_context *cmd)
{
const char *cache_file_prefix = NULL;
static char buf[PATH_MAX];
if (find_config_tree_node(cmd, devices_cache_file_prefix_CFG, NULL))
cache_file_prefix = find_config_tree_str_allow_empty(cmd, devices_cache_file_prefix_CFG, NULL);
if (dm_snprintf(buf, sizeof(buf), "%s/%s.cache",
get_default_unconfigured_devices_cache_dir_CFG(cmd),
cache_file_prefix ? : DEFAULT_CACHE_FILE_PREFIX) < 0) {
log_error("Persistent cache filename too long.");
return NULL;
}
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_backup_backup_dir_CFG(struct cmd_context *cmd, struct profile *profile)
{
static char buf[PATH_MAX];
@@ -2010,6 +2343,11 @@ const char *get_default_backup_backup_dir_CFG(struct cmd_context *cmd, struct pr
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_unconfigured_backup_backup_dir_CFG(struct cmd_context *cmd)
{
return "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@";
}
const char *get_default_backup_archive_dir_CFG(struct cmd_context *cmd, struct profile *profile)
{
static char buf[PATH_MAX];
@@ -2023,6 +2361,11 @@ const char *get_default_backup_archive_dir_CFG(struct cmd_context *cmd, struct p
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_unconfigured_backup_archive_dir_CFG(struct cmd_context *cmd)
{
return "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@";
}
const char *get_default_config_profile_dir_CFG(struct cmd_context *cmd, struct profile *profile)
{
static char buf[PATH_MAX];
@@ -2036,6 +2379,11 @@ const char *get_default_config_profile_dir_CFG(struct cmd_context *cmd, struct p
return dm_pool_strdup(cmd->mem, buf);
}
const char *get_default_unconfigured_config_profile_dir_CFG(struct cmd_context *cmd)
{
return "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@";
}
const char *get_default_activation_mirror_image_fault_policy_CFG(struct cmd_context *cmd, struct profile *profile)
{
return find_config_tree_str(cmd, activation_mirror_device_fault_policy_CFG, profile);

View File

@@ -72,6 +72,7 @@ typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profi
typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_UNCONFIGURED) (struct cmd_context *cmd);
/* configuration definition item value (for item's default value) */
typedef union {
@@ -88,6 +89,11 @@ typedef union {
t_fn_CFG_TYPE_ARRAY fn_CFG_TYPE_ARRAY;
} cfg_def_value_t;
typedef union {
const char *v_UNCONFIGURED;
t_fn_UNCONFIGURED fn_UNCONFIGURED;
} cfg_def_unconfigured_value_t;
/* configuration definition item flags: */
@@ -107,46 +113,60 @@ typedef union {
#define CFG_PROFILABLE_METADATA 0x030
/* whether the default value is undefned */
#define CFG_DEFAULT_UNDEFINED 0x040
/* whether the default value is commented out on output */
#define CFG_DEFAULT_COMMENTED 0x080
/* whether the default value is calculated during run time */
#define CFG_DEFAULT_RUN_TIME 0x080
#define CFG_DEFAULT_RUN_TIME 0x100
/* whether the configuration setting is disabled (and hence defaults always used) */
#define CFG_DISABLED 0x100
#define CFG_DISABLED 0x200
/* whether to print integers in octal form (prefixed by "0") */
#define CFG_FORMAT_INT_OCTAL 0x400
/* configuration definition item structure */
typedef struct cfg_def_item {
int id; /* ID of this item */
int parent; /* ID of parent item */
const char *name; /* name of the item in configuration tree */
int type; /* configuration item type (bits of cfg_def_type_t) */
cfg_def_value_t default_value; /* default value (only for settings) */
uint16_t flags; /* configuration item definition flags */
uint16_t since_version; /* version this item appeared in */
const char *comment; /* brief comment */
int id; /* ID of this item */
int parent; /* ID of parent item */
const char *name; /* name of the item in configuration tree */
int type; /* configuration item type (bits of cfg_def_type_t) */
cfg_def_value_t default_value; /* default value (only for settings) */
uint16_t flags; /* configuration item definition flags */
uint16_t since_version; /* version this item appeared in */
cfg_def_unconfigured_value_t default_unconfigured_value; /* default value in terms of @FOO@, pre-configured (only for settings) */
uint16_t deprecated_since_version; /* version since this item is deprecated */
const char *deprecation_comment; /* comment about reasons for deprecation and settings that supersede this one */
const char *comment; /* comment */
} cfg_def_item_t;
/* configuration definition tree types */
typedef enum {
CFG_DEF_TREE_CURRENT, /* tree of nodes with values currently set in the config */
CFG_DEF_TREE_MISSING, /* tree of nodes missing in current config using default values */
CFG_DEF_TREE_COMPLETE, /* CURRENT + MISSING, the tree actually used within execution, not implemented yet */
CFG_DEF_TREE_FULL, /* CURRENT + MISSING, the tree actually used within execution */
CFG_DEF_TREE_DEFAULT, /* tree of all possible config nodes with default values */
CFG_DEF_TREE_NEW, /* tree of all new nodes that appeared in given version */
CFG_DEF_TREE_PROFILABLE, /* tree of all nodes that are customizable by profiles */
CFG_DEF_TREE_PROFILABLE_CMD, /* tree of all nodes that are customizable by command profiles (subset of PROFILABLE) */
CFG_DEF_TREE_PROFILABLE_MDA, /* tree of all nodes that are customizable by metadata profiles (subset of PROFILABLE) */
CFG_DEF_TREE_DIFF, /* tree of all nodes that differ from defaults */
CFG_DEF_TREE_LIST, /* list all nodes */
} cfg_def_tree_t;
/* configuration definition tree specification */
struct config_def_tree_spec {
struct cmd_context *cmd; /* command context (for run-time defaults */
cfg_def_tree_t type; /* tree type */
uint16_t version; /* tree at this LVM2 version */
struct cmd_context *cmd; /* command context (for run-time defaults */
struct dm_config_tree *current_cft; /* current config tree which is defined explicitly - defaults are not used */
cfg_def_tree_t type; /* tree type */
uint16_t version; /* tree at this LVM2 version */
unsigned ignoreadvanced:1; /* do not include advanced configs */
unsigned ignoreunsupported:1; /* do not include unsupported configs */
unsigned withcomments:1; /* include comments */
unsigned ignoreunsupported:1; /* do not include unsupported configs */
unsigned ignoredeprecated:1; /* do not include deprecated configs */
unsigned ignorelocal:1; /* do not include the local section */
unsigned withsummary:1; /* include first line of comments - a summary */
unsigned withcomments:1; /* include all comment lines */
unsigned withversions:1; /* include versions */
uint8_t *check_status; /* status of last tree check (currently needed for CFG_DEF_TREE_MISSING only) */
unsigned withspaces:1; /* add more spaces in output for better readability */
unsigned unconfigured:1; /* use unconfigured path strings */
uint8_t *check_status; /* status of last tree check (currently needed for CFG_DEF_TREE_MISSING only) */
};
@@ -161,11 +181,11 @@ struct config_def_tree_spec {
* Register ID for each possible item in the configuration tree.
*/
enum {
#define cfg_section(id, name, parent, flags, since_version, comment) id,
#define cfg(id, name, parent, flags, type, default_value, since_version, comment) id,
#define cfg_runtime(id, name, parent, flags, type, since_version, comment) id,
#define cfg_array(id, name, parent, flags, types, default_value, since_version, comment) id,
#define cfg_array_runtime(id, name, parent, flags, types, since_version, comment) id,
#define cfg_section(id, name, parent, flags, since_version, deprecated_since_version, deprecation_comment, comment) id,
#define cfg(id, name, parent, flags, type, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_runtime(id, name, parent, flags, type, since_version, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_array(id, name, parent, flags, types, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) id,
#define cfg_array_runtime(id, name, parent, flags, types, since_version, deprecated_since_version, deprecation_comment, comment) id,
#include "config_settings.h"
#undef cfg_section
#undef cfg
@@ -187,6 +207,8 @@ struct cft_check_handle {
unsigned skip_if_checked:1; /* skip the check if already done before - return last state */
unsigned suppress_messages:1; /* suppress messages during the check if config item is found invalid */
unsigned check_diff:1; /* check if the value used differs from default one */
unsigned ignoreadvanced:1; /* do not include advnced configs */
unsigned ignoreunsupported:1; /* do not include unsupported configs */
uint8_t status[CFG_COUNT]; /* flags for each configuration item - the result of the check */
};
@@ -250,18 +272,27 @@ int find_config_tree_int(struct cmd_context *cmd, int id, struct profile *profil
int64_t find_config_tree_int64(struct cmd_context *cmd, int id, struct profile *profile);
float find_config_tree_float(struct cmd_context *cmd, int id, struct profile *profile);
int find_config_tree_bool(struct cmd_context *cmd, int id, struct profile *profile);
const struct dm_config_node *find_config_tree_array(struct cmd_context *cmd, int id, struct profile *profile);
/*
* Functions for configuration settings for which the default
* value is evaluated at runtime based on command context.
*/
const char *get_default_devices_cache_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_devices_cache_dir_CFG(struct cmd_context *cmd);
const char *get_default_devices_cache_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_devices_cache_CFG(struct cmd_context *cmd);
const char *get_default_backup_backup_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_backup_backup_dir_CFG(struct cmd_context *cmd);
const char *get_default_backup_archive_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_backup_archive_dir_CFG(struct cmd_context *cmd);
const char *get_default_config_profile_dir_CFG(struct cmd_context *cmd, struct profile *profile);
const char *get_default_unconfigured_config_profile_dir_CFG(struct cmd_context *cmd);
const char *get_default_activation_mirror_image_fault_policy_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_activation_mirror_image_fault_policy_CFG NULL
int get_default_allocation_thin_pool_chunk_size_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_allocation_thin_pool_chunk_size_CFG NULL
int get_default_allocation_cache_pool_chunk_size_CFG(struct cmd_context *cmd, struct profile *profile);
#define get_default_unconfigured_allocation_cache_pool_chunk_size_CFG NULL
#endif

File diff suppressed because it is too large Load Diff

View File

@@ -51,11 +51,14 @@
#define DEFAULT_FALLBACK_TO_LOCAL_LOCKING 1
#define DEFAULT_FALLBACK_TO_CLUSTERED_LOCKING 1
#define DEFAULT_WAIT_FOR_LOCKS 1
#define DEFAULT_LVMLOCKD_LOCK_RETRIES 3
#define DEFAULT_PRIORITISE_WRITE_LOCKS 1
#define DEFAULT_USE_MLOCKALL 0
#define DEFAULT_METADATA_READ_ONLY 0
#define DEFAULT_LVDISPLAY_SHOWS_FULL_DEVICE_PATH 0
#define DEFAULT_SANLOCK_LV_EXTEND_MB 256
#define DEFAULT_MIRRORLOG MIRROR_LOG_DISK
#define DEFAULT_MIRROR_LOG_FAULT_POLICY "allocate"
#define DEFAULT_MIRROR_IMAGE_FAULT_POLICY "remove"
@@ -76,12 +79,17 @@
#endif
#ifdef THIN_CHECK_NEEDS_CHECK
# define DEFAULT_THIN_CHECK_OPTIONS "-q --clear-needs-check-flag"
# define DEFAULT_THIN_CHECK_OPTION1 "-q"
# define DEFAULT_THIN_CHECK_OPTION2 "--clear-needs-check-flag"
# define DEFAULT_THIN_CHECK_OPTIONS_CONFIG "#S" DEFAULT_THIN_CHECK_OPTION1 "#S" DEFAULT_THIN_CHECK_OPTION2
#else
# define DEFAULT_THIN_CHECK_OPTIONS "-q"
# define DEFAULT_THIN_CHECK_OPTION1 "-q"
# define DEFAULT_THIN_CHECK_OPTION2 ""
# define DEFAULT_THIN_CHECK_OPTIONS_CONFIG "#S" DEFAULT_THIN_CHECK_OPTION1
#endif
#define DEFAULT_THIN_REPAIR_OPTIONS ""
#define DEFAULT_THIN_REPAIR_OPTION1 ""
#define DEFAULT_THIN_REPAIR_OPTIONS_CONFIG "#S" DEFAULT_THIN_REPAIR_OPTION1
#define DEFAULT_THIN_POOL_METADATA_REQUIRE_SEPARATE_PVS 0
#define DEFAULT_THIN_POOL_MAX_METADATA_SIZE (16 * 1024 * 1024) /* KB */
#define DEFAULT_THIN_POOL_MIN_METADATA_SIZE 2048 /* KB */
@@ -93,8 +101,18 @@
#define DEFAULT_THIN_POOL_ZERO 1
#define DEFAULT_POOL_METADATA_SPARE 1 /* thin + cache */
#define DEFAULT_CACHE_CHECK_OPTIONS "-q"
#define DEFAULT_CACHE_REPAIR_OPTIONS ""
#ifdef CACHE_CHECK_NEEDS_CHECK
# define DEFAULT_CACHE_CHECK_OPTION1 "-q"
# define DEFAULT_CACHE_CHECK_OPTION2 "--clear-needs-check-flag"
# define DEFAULT_CACHE_CHECK_OPTIONS_CONFIG "#S" DEFAULT_CACHE_CHECK_OPTION1 "#S" DEFAULT_CACHE_CHECK_OPTION2
#else
# define DEFAULT_CACHE_CHECK_OPTION1 "-q"
# define DEFAULT_CACHE_CHECK_OPTION2 ""
# define DEFAULT_CACHE_CHECK_OPTIONS_CONFIG "#S" DEFAULT_CACHE_CHECK_OPTION1
#endif
#define DEFAULT_CACHE_REPAIR_OPTION1 ""
#define DEFAULT_CACHE_REPAIR_OPTIONS_CONFIG "#S" DEFAULT_CACHE_REPAIR_OPTION1
#define DEFAULT_CACHE_POOL_METADATA_REQUIRE_SEPARATE_PVS 0
#define DEFAULT_CACHE_POOL_CHUNK_SIZE 64 /* KB */
#define DEFAULT_CACHE_POOL_MIN_METADATA_SIZE 2048 /* KB */
@@ -104,12 +122,6 @@
#define DEFAULT_UMASK 0077
#ifdef LVM1_FALLBACK
# define DEFAULT_FALLBACK_TO_LVM1 1
#else
# define DEFAULT_FALLBACK_TO_LVM1 0
#endif
#define DEFAULT_FORMAT "lvm2"
#define DEFAULT_STRIPESIZE 64 /* KB */
@@ -140,10 +152,6 @@
# define DEFAULT_LOG_FACILITY LOG_USER
#endif
#define DEFAULT_LOGGED_DEBUG_CLASSES (LOG_CLASS_MEM | LOG_CLASS_DEVS | \
LOG_CLASS_ACTIVATION | LOG_CLASS_ALLOC | LOG_CLASS_LVMETAD | \
LOG_CLASS_METADATA | LOG_CLASS_CACHE | LOG_CLASS_LOCKING)
#define DEFAULT_SYSLOG 1
#define DEFAULT_VERBOSE 0
#define DEFAULT_SILENT 0
@@ -189,6 +197,7 @@
#define DEFAULT_REP_QUOTED 1
#define DEFAULT_REP_SEPARATOR " "
#define DEFAULT_REP_LIST_ITEM_SEPARATOR ","
#define DEFAULT_TIME_FORMAT "%Y-%m-%d %T %z"
#define DEFAULT_LVS_COLS "lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
#define DEFAULT_VGS_COLS "vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
@@ -218,4 +227,6 @@
#define DEFAULT_THIN_POOL_AUTOEXTEND_THRESHOLD 100
#define DEFAULT_THIN_POOL_AUTOEXTEND_PERCENT 20
#define DEFAULT_CY_LOCK_TYPE "sanlock"
#endif /* _LVM_DEFAULTS_H */

View File

@@ -71,6 +71,21 @@ int str_list_add(struct dm_pool *mem, struct dm_list *sll, const char *str)
return str_list_add_no_dup_check(mem, sll, str);
}
/* Add contents of sll2 to sll */
int str_list_add_list(struct dm_pool *mem, struct dm_list *sll, struct dm_list *sll2)
{
struct dm_str_list *sl;
if (!sll2)
return_0;
dm_list_iterate_items(sl, sll2)
if (!str_list_add(mem, sll, sl->str))
return_0;
return 1;
}
void str_list_del(struct dm_list *sll, const char *str)
{
struct dm_list *slh, *slht;

View File

@@ -21,6 +21,7 @@ struct dm_pool;
struct dm_list *str_list_create(struct dm_pool *mem);
int str_list_add(struct dm_pool *mem, struct dm_list *sll, const char *str);
int str_list_add_list(struct dm_pool *mem, struct dm_list *sll, struct dm_list *sll2);
int str_list_add_no_dup_check(struct dm_pool *mem, struct dm_list *sll, const char *str);
int str_list_add_h_no_dup_check(struct dm_pool *mem, struct dm_list *sll, const char *str);
void str_list_del(struct dm_list *sll, const char *str);

View File

@@ -681,10 +681,12 @@ static int _init_preferred_names(struct cmd_context *cmd)
_cache.preferred_names_matcher = NULL;
if (!(cn = find_config_tree_node(cmd, devices_preferred_names_CFG, NULL)) ||
if (!(cn = find_config_tree_array(cmd, devices_preferred_names_CFG, NULL)) ||
cn->v->type == DM_CFG_EMPTY_ARRAY) {
log_very_verbose("devices/preferred_names not found in config file: "
"using built-in preferences");
log_very_verbose("devices/preferred_names %s: "
"using built-in preferences",
cn && cn->v->type == DM_CFG_EMPTY_ARRAY ? "is empty"
: "not found in config");
return 1;
}

View File

@@ -225,6 +225,9 @@ int dev_subsystem_part_major(struct dev_types *dt, struct device *dev)
const char *dev_subsystem_name(struct dev_types *dt, struct device *dev)
{
if (MAJOR(dev->dev) == dt->device_mapper_major)
return "DM";
if (MAJOR(dev->dev) == dt->md_major)
return "MD";
@@ -430,7 +433,7 @@ int dev_get_primary_dev(struct dev_types *dt, struct device *dev, dev_t *result)
*/
if ((parts = dt->dev_type_array[major].max_partitions) > 1) {
if ((residue = minor % parts)) {
*result = MKDEV((dev_t)major, (minor - residue));
*result = MKDEV((dev_t)major, (dev_t)(minor - residue));
ret = 2;
} else {
*result = dev->dev;
@@ -507,7 +510,7 @@ int dev_get_primary_dev(struct dev_types *dt, struct device *dev, dev_t *result)
path, buffer);
goto out;
}
*result = MKDEV((dev_t)major, minor);
*result = MKDEV((dev_t)major, (dev_t)minor);
ret = 2;
out:
if (fp && fclose(fp))
@@ -799,7 +802,7 @@ static unsigned long _dev_topology_attribute(struct dev_types *dt,
}
log_very_verbose("Device %s: %s is %lu%s.",
dev_name(dev), attribute, result, default_value ? "" : " bytes");
dev_name(dev), attribute, value, default_value ? "" : " bytes");
result = value >> SECTOR_SHIFT;

View File

@@ -86,6 +86,38 @@ alloc_policy_t get_alloc_from_string(const char *str)
return ALLOC_INVALID;
}
const char *get_lock_type_string(lock_type_t lock_type)
{
switch (lock_type) {
case LOCK_TYPE_INVALID:
return "invalid";
case LOCK_TYPE_NONE:
return "none";
case LOCK_TYPE_CLVM:
return "clvm";
case LOCK_TYPE_DLM:
return "dlm";
case LOCK_TYPE_SANLOCK:
return "sanlock";
}
return "invalid";
}
lock_type_t get_lock_type_from_string(const char *str)
{
if (!str)
return LOCK_TYPE_NONE;
if (!strcmp(str, "none"))
return LOCK_TYPE_NONE;
if (!strcmp(str, "clvm"))
return LOCK_TYPE_CLVM;
if (!strcmp(str, "dlm"))
return LOCK_TYPE_DLM;
if (!strcmp(str, "sanlock"))
return LOCK_TYPE_SANLOCK;
return LOCK_TYPE_INVALID;
}
static const char *_percent_types[7] = { "NONE", "VG", "FREE", "LV", "PVS", "ORIGIN" };
const char *get_percent_string(percent_type_t def)
@@ -95,8 +127,23 @@ const char *get_percent_string(percent_type_t def)
const char *display_lvname(const struct logical_volume *lv)
{
/* On allocation failure, just return the LV name. */
return lv_fullname_dup(lv->vg->cmd->mem, lv) ? : lv->name;
char *name;
int r;
if ((lv->vg->cmd->display_lvname_idx + NAME_LEN) >= sizeof((lv->vg->cmd->display_buffer)))
lv->vg->cmd->display_lvname_idx = 0;
name = lv->vg->cmd->display_buffer + lv->vg->cmd->display_lvname_idx;
r = dm_snprintf(name, NAME_LEN, "%s/%s", lv->vg->name, lv->name);
if (r < 0) {
log_error("Full LV name \"%s/%s\" is too long.", lv->vg->name, lv->name);
return NULL;
}
lv->vg->cmd->display_lvname_idx += r + 1;
return name;
}
#define BASE_UNKNOWN 0
@@ -474,7 +521,7 @@ int lvdisplay_full(struct cmd_context *cmd,
log_print("LV UUID %s", uuid);
log_print("LV Write Access %s", access_str);
log_print("LV Creation host, time %s, %s",
lv_host_dup(cmd->mem, lv), lv_time_dup(cmd->mem, lv));
lv_host_dup(cmd->mem, lv), lv_time_dup(cmd->mem, lv, 1));
if (lv_is_origin(lv)) {
log_print("LV snapshot status source of");

View File

@@ -64,6 +64,9 @@ const char *get_alloc_string(alloc_policy_t alloc);
char alloc_policy_char(alloc_policy_t alloc);
alloc_policy_t get_alloc_from_string(const char *str);
const char *get_lock_type_string(lock_type_t lock_type);
lock_type_t get_lock_type_from_string(const char *str);
const char *get_percent_string(percent_type_t def);
char yes_no_prompt(const char *prompt, ...) __attribute__ ((format(printf, 1, 2)));

View File

@@ -164,7 +164,7 @@ int export_pv(struct cmd_context *cmd, struct dm_pool *mem __attribute__((unused
/* Is VG already exported or being exported? */
if (vg && vg_is_exported(vg)) {
/* Does system_id need setting? */
if (!*vg->lvm1_system_id ||
if ((vg->lvm1_system_id && !*vg->lvm1_system_id) ||
strncmp(vg->lvm1_system_id, EXPORTED_TAG,
sizeof(EXPORTED_TAG) - 1)) {
if (!generate_lvm1_system_id(cmd, (char *)pvd->system_id, EXPORTED_TAG))
@@ -180,7 +180,7 @@ int export_pv(struct cmd_context *cmd, struct dm_pool *mem __attribute__((unused
}
/* Is VG being imported? */
if (vg && !vg_is_exported(vg) && *vg->lvm1_system_id &&
if (vg && !vg_is_exported(vg) && vg->lvm1_system_id && *vg->lvm1_system_id &&
!strncmp(vg->lvm1_system_id, EXPORTED_TAG, sizeof(EXPORTED_TAG) - 1)) {
if (!generate_lvm1_system_id(cmd, (char *)pvd->system_id, IMPORTED_TAG))
return_0;
@@ -192,7 +192,7 @@ int export_pv(struct cmd_context *cmd, struct dm_pool *mem __attribute__((unused
return_0;
/* Update internal system_id if we changed it */
if (vg &&
if (vg && vg->lvm1_system_id &&
(!*vg->lvm1_system_id ||
strncmp(vg->lvm1_system_id, (char *)pvd->system_id, sizeof(pvd->system_id))))
strncpy(vg->lvm1_system_id, (char *)pvd->system_id, NAME_LEN);

View File

@@ -372,19 +372,61 @@ static int _print_flag_config(struct formatter *f, uint64_t status, int type)
return 1;
}
static int _out_tags(struct formatter *f, struct dm_list *tagsl)
static char *_alloc_printed_str_list(struct dm_list *list)
{
char *tag_buffer;
struct dm_str_list *sl;
int first = 1;
size_t size = 0;
char *buffer, *buf;
if (!dm_list_empty(tagsl)) {
if (!(tag_buffer = alloc_printed_tags(tagsl)))
dm_list_iterate_items(sl, list)
/* '"' + item + '"' + ',' + ' ' */
size += strlen(sl->str) + 4;
/* '[' + ']' + '\0' */
size += 3;
if (!(buffer = buf = dm_malloc(size))) {
log_error("Could not allocate memory for string list buffer.");
return NULL;
}
if (!emit_to_buffer(&buf, &size, "["))
goto_bad;
dm_list_iterate_items(sl, list) {
if (!first) {
if (!emit_to_buffer(&buf, &size, ", "))
goto_bad;
} else
first = 0;
if (!emit_to_buffer(&buf, &size, "\"%s\"", sl->str))
goto_bad;
}
if (!emit_to_buffer(&buf, &size, "]"))
goto_bad;
return buffer;
bad:
dm_free(buffer);
return_NULL;
}
static int _out_list(struct formatter *f, struct dm_list *list,
const char *list_name)
{
char *buffer;
if (!dm_list_empty(list)) {
if (!(buffer = _alloc_printed_str_list(list)))
return_0;
if (!out_text(f, "tags = %s", tag_buffer)) {
dm_free(tag_buffer);
if (!out_text(f, "%s = %s", list_name, buffer)) {
dm_free(buffer);
return_0;
}
dm_free(tag_buffer);
dm_free(buffer);
}
return 1;
@@ -422,7 +464,7 @@ static int _print_vg(struct formatter *f, struct volume_group *vg)
if (!_print_flag_config(f, status, VG_FLAGS))
return_0;
if (!_out_tags(f, &vg->tags))
if (!_out_list(f, &vg->tags, "tags"))
return_0;
if (vg->system_id && *vg->system_id)
@@ -430,8 +472,11 @@ static int _print_vg(struct formatter *f, struct volume_group *vg)
else if (vg->lvm1_system_id && *vg->lvm1_system_id)
outf(f, "system_id = \"%s\"", vg->lvm1_system_id);
if (vg->lock_type)
if (vg->lock_type) {
outf(f, "lock_type = \"%s\"", vg->lock_type);
if (vg->lock_args)
outf(f, "lock_args = \"%s\"", vg->lock_args);
}
outsize(f, (uint64_t) vg->extent_size, "extent_size = %u",
vg->extent_size);
@@ -509,7 +554,7 @@ static int _print_pvs(struct formatter *f, struct volume_group *vg)
if (!_print_flag_config(f, pv->status, PV_FLAGS))
return_0;
if (!_out_tags(f, &pv->tags))
if (!_out_list(f, &pv->tags, "tags"))
return_0;
outsize(f, pv->size, "dev_size = %" PRIu64, pv->size);
@@ -545,7 +590,7 @@ static int _print_segment(struct formatter *f, struct volume_group *vg,
outnl(f);
outf(f, "type = \"%s\"", seg->segtype->name);
if (!_out_tags(f, &seg->tags))
if (!_out_list(f, &seg->tags, "tags"))
return_0;
if (seg->segtype->ops->text_export &&
@@ -641,7 +686,7 @@ static int _print_lv(struct formatter *f, struct logical_volume *lv)
if (!_print_flag_config(f, status, LV_FLAGS))
return_0;
if (!_out_tags(f, &lv->tags))
if (!_out_list(f, &lv->tags, "tags"))
return_0;
if (lv->timestamp) {
@@ -657,6 +702,9 @@ static int _print_lv(struct formatter *f, struct logical_volume *lv)
lv->timestamp);
}
if (lv->lock_args)
outf(f, "lock_args = \"%s\"", lv->lock_args);
if (lv->alloc != ALLOC_INHERIT)
outf(f, "allocation_policy = \"%s\"",
get_alloc_string(lv->alloc));

View File

@@ -67,6 +67,7 @@ static const struct flag _lv_flags[] = {
{LV_NOSCAN, NULL, 0},
{LV_TEMPORARY, NULL, 0},
{POOL_METADATA_SPARE, NULL, 0},
{LOCKD_SANLOCK_LV, NULL, 0},
{RAID, NULL, 0},
{RAID_META, NULL, 0},
{RAID_IMAGE, NULL, 0},
@@ -92,6 +93,7 @@ static const struct flag _lv_flags[] = {
{CACHE_POOL_DATA, NULL, 0},
{CACHE_POOL_METADATA, NULL, 0},
{LV_PENDING_DELETE, NULL, 0}, /* FIXME Display like COMPATIBLE_FLAG */
{LV_REMOVED, NULL, 0},
{0, NULL, 0}
};

View File

@@ -1318,7 +1318,7 @@ static int _write_single_mda(struct metadata_area *mda, void *baton)
return 1;
}
/* Only for orphans */
/* Only for orphans - FIXME That's not true any more */
static int _text_pv_write(const struct format_type *fmt, struct physical_volume *pv)
{
struct format_instance *fid = pv->fid;
@@ -1332,7 +1332,8 @@ static int _text_pv_write(const struct format_type *fmt, struct physical_volume
/* Add a new cache entry with PV info or update existing one. */
if (!(info = lvmcache_add(fmt->labeller, (const char *) &pv->id,
pv->dev, pv->vg_name, NULL, 0)))
pv->dev, pv->vg_name,
is_orphan_vg(pv->vg_name) ? pv->vg_name : pv->vg ? (const char *) &pv->vg->id : NULL, 0)))
return_0;
label = lvmcache_get_label(info);
@@ -1602,9 +1603,9 @@ static int _text_pv_initialise(const struct format_type *fmt,
if (rp->extent_count)
pv->pe_count = rp->extent_count;
if ((pv->pe_start + pv->pe_count * pv->pe_size - 1) > (pv->size << SECTOR_SHIFT)) {
if ((pv->pe_start + pv->pe_count * (uint64_t)pv->pe_size - 1) > pv->size) {
log_error("Physical extents end beyond end of device %s.",
pv_dev_name(pv));
pv_dev_name(pv));
return 0;
}
@@ -2171,7 +2172,7 @@ static int _text_pv_add_metadata_area(const struct format_type *fmt,
* LABEL_SCAN_SIZE.
*/
pe_end = pv->pe_count ? (pv->pe_start +
pv->pe_count * pv->pe_size - 1) << SECTOR_SHIFT
pv->pe_count * (uint64_t)pv->pe_size - 1) << SECTOR_SHIFT
: 0;
if (pe_start || pe_start_locked) {
@@ -2236,7 +2237,7 @@ static int _text_pv_add_metadata_area(const struct format_type *fmt,
if (limit_applied)
log_very_verbose("Using limited metadata area size on %s "
"with value %" PRIu64 " (limited by %s of "
"%" PRIu64 ").", pv_dev_name(pv),
FMTu64 ").", pv_dev_name(pv),
mda_size, limit_name, limit);
if (mda_size) {
@@ -2490,7 +2491,7 @@ struct format_type *create_text_format(struct cmd_context *cmd)
goto bad;
}
if ((cn = find_config_tree_node(cmd, metadata_dirs_CFG, NULL))) {
if ((cn = find_config_tree_array(cmd, metadata_dirs_CFG, NULL))) {
for (cv = cn->v; cv; cv = cv->next) {
if (cv->type != DM_CFG_STRING) {
log_error("Invalid string in config file: "

View File

@@ -47,7 +47,8 @@ struct text_vg_version_ops {
int (*check_version) (const struct dm_config_tree * cf);
struct volume_group *(*read_vg) (struct format_instance * fid,
const struct dm_config_tree *cf,
unsigned use_cached_pvs);
unsigned use_cached_pvs,
unsigned allow_lvmetad_extensions);
void (*read_desc) (struct dm_pool * mem, const struct dm_config_tree *cf,
time_t *when, char **desc);
int (*read_vgname) (const struct format_type *fmt,
@@ -60,9 +61,6 @@ struct text_vg_version_ops *text_vg_vsn1_init(void);
int print_flags(uint64_t status, int type, char *buffer, size_t size);
int read_flags(uint64_t *status, int type, const struct dm_config_value *cv);
char *alloc_printed_tags(struct dm_list *tags);
int read_tags(struct dm_pool *mem, struct dm_list *tags, const struct dm_config_value *cv);
int text_vg_export_file(struct volume_group *vg, const char *desc, FILE *fp);
size_t text_vg_export_raw(struct volume_group *vg, const char *desc, char **buf);
struct volume_group *text_vg_import_file(struct format_instance *fid,

View File

@@ -146,7 +146,7 @@ struct volume_group *text_vg_import_fd(struct format_instance *fid,
if (!(*vsn)->check_version(cft))
continue;
if (!(vg = (*vsn)->read_vg(fid, cft, single_device)))
if (!(vg = (*vsn)->read_vg(fid, cft, single_device, 0)))
goto_out;
(*vsn)->read_desc(vg->vgmem, cft, when, desc);
@@ -174,8 +174,9 @@ struct volume_group *text_vg_import_file(struct format_instance *fid,
when, desc);
}
struct volume_group *import_vg_from_config_tree(const struct dm_config_tree *cft,
struct format_instance *fid)
static struct volume_group *_import_vg_from_config_tree(const struct dm_config_tree *cft,
struct format_instance *fid,
unsigned allow_lvmetad_extensions)
{
struct volume_group *vg = NULL;
struct text_vg_version_ops **vsn;
@@ -190,7 +191,7 @@ struct volume_group *import_vg_from_config_tree(const struct dm_config_tree *cft
* The only path to this point uses cached vgmetadata,
* so it can use cached PV state too.
*/
if (!(vg = (*vsn)->read_vg(fid, cft, 1)))
if (!(vg = (*vsn)->read_vg(fid, cft, 1, allow_lvmetad_extensions)))
stack;
else if ((vg_missing = vg_missing_pv_count(vg))) {
log_verbose("There are %d physical volumes missing.",
@@ -203,3 +204,15 @@ struct volume_group *import_vg_from_config_tree(const struct dm_config_tree *cft
return vg;
}
struct volume_group *import_vg_from_config_tree(const struct dm_config_tree *cft,
struct format_instance *fid)
{
return _import_vg_from_config_tree(cft, fid, 0);
}
struct volume_group *import_vg_from_lvmetad_config_tree(const struct dm_config_tree *cft,
struct format_instance *fid)
{
return _import_vg_from_config_tree(cft, fid, 1);
}

View File

@@ -20,11 +20,13 @@
#include "toolcontext.h"
#include "lvmcache.h"
#include "lvmetad.h"
#include "lvmlockd.h"
#include "lv_alloc.h"
#include "pv_alloc.h"
#include "segtype.h"
#include "text_import.h"
#include "defaults.h"
#include "str_list.h"
typedef int (*section_fn) (struct format_instance * fid,
struct volume_group * vg, const struct dm_config_node * pvn,
@@ -153,6 +155,26 @@ static int _read_flag_config(const struct dm_config_node *n, uint64_t *status, i
return 1;
}
static int _read_str_list(struct dm_pool *mem, struct dm_list *list, const struct dm_config_value *cv)
{
if (cv->type == DM_CFG_EMPTY_ARRAY)
return 1;
while (cv) {
if (cv->type != DM_CFG_STRING) {
log_error("Found an item that is not a string");
return 0;
}
if (!str_list_add(mem, list, dm_pool_strdup(mem, cv->v.str)))
return_0;
cv = cv->next;
}
return 1;
}
static int _read_pv(struct format_instance *fid,
struct volume_group *vg, const struct dm_config_node *pvn,
const struct dm_config_node *vgn __attribute__((unused)),
@@ -167,6 +189,8 @@ static int _read_pv(struct format_instance *fid,
const struct dm_config_value *cv;
uint64_t size, ba_start;
int outdated = !strcmp(pvn->parent->key, "outdated_pvs");
if (!(pvl = dm_pool_zalloc(mem, sizeof(*pvl))) ||
!(pvl->pv = dm_pool_zalloc(mem, sizeof(*pvl->pv))))
return_0;
@@ -212,7 +236,7 @@ static int _read_pv(struct format_instance *fid,
memcpy(&pv->vgid, &vg->id, sizeof(vg->id));
if (!_read_flag_config(pvn, &pv->status, PV_FLAGS)) {
if (!outdated && !_read_flag_config(pvn, &pv->status, PV_FLAGS)) {
log_error("Couldn't read status flags for physical volume.");
return 0;
}
@@ -234,13 +258,13 @@ static int _read_pv(struct format_instance *fid,
return 0;
}
if (!_read_uint64(pvn, "pe_start", &pv->pe_start)) {
if (!outdated && !_read_uint64(pvn, "pe_start", &pv->pe_start)) {
log_error("Couldn't read extent start value (pe_start) "
"for physical volume.");
return 0;
}
if (!_read_int32(pvn, "pe_count", &pv->pe_count)) {
if (!outdated && !_read_int32(pvn, "pe_count", &pv->pe_count)) {
log_error("Couldn't find extent count (pe_count) for "
"physical volume.");
return 0;
@@ -251,7 +275,7 @@ static int _read_pv(struct format_instance *fid,
_read_uint64(pvn, "ba_start", &ba_start);
_read_uint64(pvn, "ba_size", &size);
if (ba_start && size) {
log_debug("Found bootloader area specification for PV %s "
log_debug_metadata("Found bootloader area specification for PV %s "
"in metadata: ba_start=%" PRIu64 ", ba_size=%" PRIu64 ".",
pv_dev_name(pv), ba_start, size);
pv->ba_start = ba_start;
@@ -267,7 +291,7 @@ static int _read_pv(struct format_instance *fid,
/* Optional tags */
if (dm_config_get_list(pvn, "tags", &cv) &&
!(read_tags(mem, &pv->tags, cv))) {
!(_read_str_list(mem, &pv->tags, cv))) {
log_error("Couldn't read tags for physical volume %s in %s.",
pv_dev_name(pv), vg->name);
return 0;
@@ -299,7 +323,10 @@ static int _read_pv(struct format_instance *fid,
vg->extent_count += pv->pe_count;
vg->free_count += pv->pe_count;
add_pvl_to_vgs(vg, pvl);
if (outdated)
dm_list_add(&vg->pvs_outdated, &pvl->list);
else
add_pvl_to_vgs(vg, pvl);
return 1;
}
@@ -375,7 +402,7 @@ static int _read_segment(struct logical_volume *lv, const struct dm_config_node
/* Optional tags */
if (dm_config_get_list(sn_child, "tags", &cv) &&
!(read_tags(mem, &seg->tags, cv))) {
!(_read_str_list(mem, &seg->tags, cv))) {
log_error("Couldn't read tags for a segment of %s/%s.",
lv->vg->name, lv->name);
return 0;
@@ -573,6 +600,30 @@ static int _read_lvnames(struct format_instance *fid __attribute__((unused)),
return 0;
}
/*
* The LV lock_args string is generated in lvmlockd, and the content
* depends on the lock_type.
*
* lock_type dlm does not use LV lock_args, so the LV lock_args field
* is just set to "dlm".
*
* lock_type sanlock uses the LV lock_args field to save the
* location on disk of that LV's sanlock lock. The disk name is
* specified in the VG lock_args. The lock_args string begins
* with a version number, e.g. 1.0.0, followed by a colon, followed
* by a number. The number is the offset on disk where sanlock is
* told to find the LV's lock.
* e.g. lock_args = 1.0.0:70254592
* means that the lock is located at offset 70254592.
*
* The lvmlockd code for each specific lock manager also validates
* the lock_args before using it to access the lock manager.
*/
if (dm_config_get_str(lvn, "lock_args", &str)) {
if (!(lv->lock_args = dm_pool_strdup(mem, str)))
return_0;
}
lv->alloc = ALLOC_INHERIT;
if (dm_config_get_str(lvn, "allocation_policy", &str)) {
lv->alloc = get_alloc_from_string(str);
@@ -611,7 +662,7 @@ static int _read_lvnames(struct format_instance *fid __attribute__((unused)),
/* Optional tags */
if (dm_config_get_list(lvn, "tags", &cv) &&
!(read_tags(mem, &lv->tags, cv))) {
!(_read_str_list(mem, &lv->tags, cv))) {
log_error("Couldn't read tags for logical volume %s/%s.",
vg->name, lv->name);
return 0;
@@ -638,6 +689,12 @@ static int _read_lvnames(struct format_instance *fid __attribute__((unused)),
vg->pool_metadata_spare_lv = lv;
}
if (!lv_is_visible(lv) && !strcmp(lv->name, LOCKD_SANLOCK_LV_NAME)) {
log_debug_metadata("Logical volume %s is sanlock lv.", lv->name);
lv->status |= LOCKD_SANLOCK_LV;
vg->sanlock_lv = lv;
}
return 1;
}
@@ -735,7 +792,8 @@ static int _read_sections(struct format_instance *fid,
static struct volume_group *_read_vg(struct format_instance *fid,
const struct dm_config_tree *cft,
unsigned use_cached_pvs)
unsigned use_cached_pvs,
unsigned allow_lvmetad_extensions)
{
const struct dm_config_node *vgn;
const struct dm_config_value *cv;
@@ -789,6 +847,32 @@ static struct volume_group *_read_vg(struct format_instance *fid,
goto bad;
}
/*
* The VG lock_args string is generated in lvmlockd, and the content
* depends on the lock_type. lvmlockd begins the lock_args string
* with a version number, e.g. 1.0.0, followed by a colon, followed
* by a string that depends on the lock manager. The string after
* the colon is information needed to use the lock manager for the VG.
*
* For sanlock, the string is the name of the internal LV used to store
* sanlock locks. lvmlockd needs to know where the locks are located
* so it can pass that location to sanlock which needs to access the locks.
* e.g. lock_args = 1.0.0:lvmlock
* means that the locks are located on the the LV "lvmlock".
*
* For dlm, the string is the dlm cluster name. lvmlockd needs to use
* a dlm lockspace in this cluster to use the VG.
* e.g. lock_args = 1.0.0:foo
* means that the host needs to be a member of the cluster "foo".
*
* The lvmlockd code for each specific lock manager also validates
* the lock_args before using it to access the lock manager.
*/
if (dm_config_get_str(vgn, "lock_args", &str)) {
if (!(vg->lock_args = dm_pool_strdup(vg->vgmem, str)))
goto bad;
}
if (!_read_id(&vg->id, vgn, "id")) {
log_error("Couldn't read uuid for volume group %s.", vg->name);
goto bad;
@@ -877,9 +961,15 @@ static struct volume_group *_read_vg(struct format_instance *fid,
goto bad;
}
if (allow_lvmetad_extensions)
_read_sections(fid, "outdated_pvs", _read_pv, vg,
vgn, pv_hash, lv_hash, 1, &scan_done_once);
else if (dm_config_has_node(vgn, "outdated_pvs"))
log_error(INTERNAL_ERROR "Unexpected outdated_pvs section in metadata of VG %s.", vg->name);
/* Optional tags */
if (dm_config_get_list(vgn, "tags", &cv) &&
!(read_tags(vg->vgmem, &vg->tags, cv))) {
!(_read_str_list(vg->vgmem, &vg->tags, cv))) {
log_error("Couldn't read tags for volume group %s.", vg->name);
goto bad;
}

View File

@@ -1,82 +0,0 @@
/*
* Copyright (C) 2003-2004 Sistina Software, Inc. All rights reserved.
* Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "lib.h"
#include "metadata.h"
#include "import-export.h"
#include "str_list.h"
#include "lvm-string.h"
char *alloc_printed_tags(struct dm_list *tagsl)
{
struct dm_str_list *sl;
int first = 1;
size_t size = 0;
char *buffer, *buf;
dm_list_iterate_items(sl, tagsl)
/* '"' + tag + '"' + ',' + ' ' */
size += strlen(sl->str) + 4;
/* '[' + ']' + '\0' */
size += 3;
if (!(buffer = buf = dm_malloc(size))) {
log_error("Could not allocate memory for tag list buffer.");
return NULL;
}
if (!emit_to_buffer(&buf, &size, "["))
goto_bad;
dm_list_iterate_items(sl, tagsl) {
if (!first) {
if (!emit_to_buffer(&buf, &size, ", "))
goto_bad;
} else
first = 0;
if (!emit_to_buffer(&buf, &size, "\"%s\"", sl->str))
goto_bad;
}
if (!emit_to_buffer(&buf, &size, "]"))
goto_bad;
return buffer;
bad:
dm_free(buffer);
return_NULL;
}
int read_tags(struct dm_pool *mem, struct dm_list *tagsl, const struct dm_config_value *cv)
{
if (cv->type == DM_CFG_EMPTY_ARRAY)
return 1;
while (cv) {
if (cv->type != DM_CFG_STRING) {
log_error("Found a tag that is not a string");
return 0;
}
if (!str_list_add(mem, tagsl, dm_pool_strdup(mem, cv->v.str)))
return_0;
cv = cv->next;
}
return 1;
}

View File

@@ -418,8 +418,8 @@ static int _text_read(struct labeller *l, struct device *dev, void *buf,
if (!(ext_version = xlate32(pvhdr_ext->version)))
goto out;
log_debug("%s: PV header extension version %" PRIu32 " found",
dev_name(dev), ext_version);
log_debug_metadata("%s: PV header extension version %" PRIu32 " found",
dev_name(dev), ext_version);
/* Bootloader areas */
dlocn_xl = pvhdr_ext->bootloader_areas_xl;

View File

@@ -195,9 +195,10 @@ int check_lvm1_vg_inactive(struct cmd_context *cmd, const char *vgname);
#define unlock_vg(cmd, vol) \
do { \
if (is_real_vg(vol)) \
sync_dev_names(cmd); \
(void) lock_vol(cmd, vol, LCK_VG_UNLOCK, NULL); \
if (is_real_vg(vol) && !sync_dev_names(cmd)) \
stack; \
if (!lock_vol(cmd, vol, LCK_VG_UNLOCK, NULL)) \
stack; \
} while (0)
#define unlock_and_release_vg(cmd, vg, vol) \
do { \

2521
lib/locking/lvmlockd.c Normal file

File diff suppressed because it is too large Load Diff

247
lib/locking/lvmlockd.h Normal file
View File

@@ -0,0 +1,247 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*/
#ifndef _LVMLOCKD_H
#define _LVMLOCKD_H
#include "config-util.h"
#include "daemon-client.h"
#define LOCKD_SANLOCK_LV_NAME "lvmlock"
/* lockd_gl flags */
#define LDGL_SKIP_CACHE_VALIDATE 0x00000001
#define LDGL_UPDATE_NAMES 0x00000002
/* lockd_lv flags */
#define LDLV_MODE_NO_SH 0x00000001
#define LDLV_PERSISTENT 0x00000002
/* lvmlockd result flags */
#define LD_RF_NO_LOCKSPACES 0x00000001
#define LD_RF_NO_GL_LS 0x00000002
#define LD_RF_LOCAL_LS 0x00000004
#define LD_RF_DUP_GL_LS 0x00000008
#define LD_RF_INACTIVE_LS 0x00000010
#define LD_RF_ADD_LS_ERROR 0x00000020
/* lockd_state flags */
#define LDST_EX 0x00000001
#define LDST_SH 0x00000002
#define LDST_FAIL_REQUEST 0x00000004
#define LDST_FAIL_NOLS 0x00000008
#define LDST_FAIL_STARTING 0x00000010
#define LDST_FAIL_OTHER 0x00000020
#define LDST_FAIL (LDST_FAIL_REQUEST | LDST_FAIL_NOLS | LDST_FAIL_STARTING | LDST_FAIL_OTHER)
#ifdef LVMLOCKD_SUPPORT
/* lvmlockd connection and communication */
void lvmlockd_set_socket(const char *sock);
void lvmlockd_set_use(int use);
int lvmlockd_use(void);
void lvmlockd_init(struct cmd_context *cmd);
void lvmlockd_connect(void);
void lvmlockd_disconnect(void);
/* vgcreate/vgremove use init/free */
int lockd_init_vg(struct cmd_context *cmd, struct volume_group *vg, const char *lock_type);
int lockd_free_vg_before(struct cmd_context *cmd, struct volume_group *vg);
void lockd_free_vg_final(struct cmd_context *cmd, struct volume_group *vg);
/* vgrename */
int lockd_rename_vg_before(struct cmd_context *cmd, struct volume_group *vg);
int lockd_rename_vg_final(struct cmd_context *cmd, struct volume_group *vg, int success);
/* start and stop the lockspace for a vg */
int lockd_start_vg(struct cmd_context *cmd, struct volume_group *vg);
int lockd_stop_vg(struct cmd_context *cmd, struct volume_group *vg);
int lockd_start_wait(struct cmd_context *cmd);
/* locking */
int lockd_gl_create(struct cmd_context *cmd, const char *def_mode, const char *vg_lock_type);
int lockd_gl(struct cmd_context *cmd, const char *def_mode, uint32_t flags);
int lockd_vg(struct cmd_context *cmd, const char *vg_name, const char *def_mode,
uint32_t flags, uint32_t *lockd_state);
int lockd_vg_update(struct volume_group *vg);
int lockd_lv_name(struct cmd_context *cmd, struct volume_group *vg,
const char *lv_name, struct id *lv_id,
const char *lock_args, const char *def_mode, uint32_t flags);
int lockd_lv(struct cmd_context *cmd, struct logical_volume *lv,
const char *def_mode, uint32_t flags);
/* lvcreate/lvremove use init/free */
int lockd_init_lv(struct cmd_context *cmd, struct volume_group *vg, struct logical_volume *lv,
struct lvcreate_params *lp);
int lockd_init_lv_args(struct cmd_context *cmd, struct volume_group *vg,
struct logical_volume *lv, const char *lock_type, const char **lock_args);
int lockd_free_lv(struct cmd_context *cmd, struct volume_group *vg,
const char *lv_name, struct id *lv_id, const char *lock_args);
const char *lockd_running_lock_type(struct cmd_context *cmd);
int handle_sanlock_lv(struct cmd_context *cmd, struct volume_group *vg);
int lockd_lv_uses_lock(struct logical_volume *lv);
#else /* LVMLOCKD_SUPPORT */
static inline void lvmlockd_set_socket(const char *sock)
{
}
static inline void lvmlockd_set_use(int use)
{
}
static inline void lvmlockd_init(struct cmd_context *cmd)
{
}
static inline void lvmlockd_disconnect(void)
{
}
static inline void lvmlockd_connect(void)
{
}
static inline int lvmlockd_use(void)
{
return 0;
}
static inline int lockd_init_vg(struct cmd_context *cmd, struct volume_group *vg, const char *lock_type)
{
return 1;
}
static inline int lockd_free_vg_before(struct cmd_context *cmd, struct volume_group *vg)
{
return 1;
}
static inline void lockd_free_vg_final(struct cmd_context *cmd, struct volume_group *vg)
{
return;
}
static inline int lockd_rename_vg_before(struct cmd_context *cmd, struct volume_group *vg)
{
return 1;
}
static inline int lockd_rename_vg_final(struct cmd_context *cmd, struct volume_group *vg, int success)
{
return 1;
}
static inline int lockd_start_vg(struct cmd_context *cmd, struct volume_group *vg)
{
return 0;
}
static inline int lockd_stop_vg(struct cmd_context *cmd, struct volume_group *vg)
{
return 0;
}
static inline int lockd_start_wait(struct cmd_context *cmd)
{
return 0;
}
static inline int lockd_gl_create(struct cmd_context *cmd, const char *def_mode, const char *vg_lock_type)
{
/*
* When lvm is built without lvmlockd support, creating a VG with
* a shared lock type should fail.
*/
if (is_lockd_type(vg_lock_type)) {
log_error("Using a shared lock type requires lvmlockd.");
return 0;
}
return 1;
}
static inline int lockd_gl(struct cmd_context *cmd, const char *def_mode, uint32_t flags)
{
return 1;
}
static inline int lockd_vg(struct cmd_context *cmd, const char *vg_name, const char *def_mode,
uint32_t flags, uint32_t *lockd_state)
{
*lockd_state = 0;
return 1;
}
static inline int lockd_vg_update(struct volume_group *vg)
{
return 1;
}
static inline int lockd_lv_name(struct cmd_context *cmd, struct volume_group *vg,
const char *lv_name, struct id *lv_id,
const char *lock_args, const char *def_mode, uint32_t flags)
{
return 1;
}
static inline int lockd_lv(struct cmd_context *cmd, struct logical_volume *lv,
const char *def_mode, uint32_t flags)
{
return 1;
}
static inline int lockd_init_lv(struct cmd_context *cmd, struct volume_group *vg,
struct logical_volume *lv, struct lvcreate_params *lp)
{
return 1;
}
static inline int lockd_init_lv_args(struct cmd_context *cmd, struct volume_group *vg,
struct logical_volume *lv, const char *lock_type, const char **lock_args)
{
return 1;
}
static inline int lockd_free_lv(struct cmd_context *cmd, struct volume_group *vg,
const char *lv_name, struct id *lv_id, const char *lock_args)
{
return 1;
}
static inline const char *lockd_running_lock_type(struct cmd_context *cmd)
{
log_error("Using a shared lock type requires lvmlockd.");
return NULL;
}
static inline int handle_sanlock_lv(struct cmd_context *cmd, struct volume_group *vg)
{
return 0;
}
static inline int lockd_lv_uses_lock(struct logical_volume *lv)
{
return 0;
}
#endif /* LVMLOCKD_SUPPORT */
#endif /* _LVMLOCKD_H */

View File

@@ -18,10 +18,13 @@
#include "memlock.h"
#include "defaults.h"
#include <stdio.h>
#include <stdarg.h>
#include <syslog.h>
#include <ctype.h>
static FILE *_log_file;
static char _log_file_path[PATH_MAX];
static struct device _log_dev;
static struct dm_str_list _log_dev_alias;
@@ -52,11 +55,59 @@ void init_log_fn(lvm2_log_fn_t log_fn)
_lvm2_log_fn = NULL;
}
/*
* Support envvar LVM_LOG_FILE_EPOCH and allow to attach
* extra keyword (consist of upto 32 alpha chars) to
* opened log file. After this 'epoch' word pid and starttime
* (in kernel units, read from /proc/self/stat)
* is automatically attached.
* If command/daemon forks multiple times, it could create multiple
* log files ensuring, there are no overwrites.
*/
void init_log_file(const char *log_file, int append)
{
const char *open_mode = append ? "a" : "w";
static const char statfile[] = "/proc/self/stat";
const char *env;
int pid;
long long starttime;
FILE *st;
int i = 0;
if (!(_log_file = fopen(log_file, open_mode))) {
_log_file_path[0] = '\0';
if ((env = getenv("LVM_LOG_FILE_EPOCH")) && env[0]) {
while (isalpha(env[i]) && i < 32) /* Up to 32 alphas */
i++;
if (env[i]) {
if (i)
log_warn("WARNING: Ignoring invalid LVM_LOG_FILE_EPOCH envvar \"%s\".", env);
goto no_epoch;
}
if (!(st = fopen(statfile, "r")))
log_sys_error("fopen", statfile);
else if (fscanf(st, "%d %*s %*c %*d %*d %*d %*d " /* tty_nr */
"%*d %*u %*u %*u %*u " /* mjflt */
"%*u %*u %*u %*d %*d " /* cstim */
"%*d %*d %*d %*d " /* itrealvalue */
"%llu", &pid, &starttime) != 2) {
log_warn("WARNING: Cannot parse content of %s.", statfile);
} else {
if (dm_snprintf(_log_file_path, sizeof(_log_file_path),
"%s_%s_%d_%lld", log_file, env, pid, starttime) < 0) {
log_warn("WARNING: Debug log file path is too long for epoch.");
_log_file_path[0] = '\0';
} else {
log_file = _log_file_path;
append = 1; /* force */
}
}
if (st && fclose(st))
log_sys_debug("fclose", statfile);
}
no_epoch:
if (!(_log_file = fopen(log_file, append ? "a" : "w"))) {
log_sys_error("fopen", log_file);
return;
}
@@ -64,6 +115,31 @@ void init_log_file(const char *log_file, int append)
_log_to_file = 1;
}
/*
* Unlink the log file depeding on command's return value
*
* When envvar LVM_EXPECTED_EXIT_STATUS is set, compare
* resulting status with this string.
*
* It's possible to specify 2 variants - having it equal to
* a single number or having it different from a single number.
*
* i.e. LVM_EXPECTED_EXIT_STATUS=">1" # delete when ret > 1.
*/
void unlink_log_file(int ret)
{
const char *env;
if (_log_file_path[0] &&
(env = getenv("LVM_EXPECTED_EXIT_STATUS")) &&
((env[0] == '>' && ret > atoi(env + 1)) ||
(atoi(env) == ret))) {
if (unlink(_log_file_path))
log_sys_error("unlink", _log_file_path);
_log_file_path[0] = '\0';
}
}
void init_log_direct(const char *log_file, int append)
{
int open_flags = append ? 0 : O_TRUNC;
@@ -299,17 +375,19 @@ void print_log(int level, const char *file, int line, int dm_errno_or_class,
va_start(ap, format);
switch (level) {
case _LOG_DEBUG:
if ((verbose_level() == level) &&
(strcmp("<backtrace>", format) == 0))
break;
if (verbose_level() < _LOG_DEBUG)
break;
if (!debug_class_is_logged(dm_errno_or_class))
break;
if ((verbose_level() == level) &&
(strcmp("<backtrace>", format) == 0))
break;
/* fall through */
default:
/* Typically only log_warn goes to stdout */
stream = (use_stderr || (level != _LOG_WARN)) ? stderr : stdout;
if (stream == stderr)
fflush(stdout);
fprintf(stream, "%s%s%s%s", buf, log_command_name(),
_msg_prefix, indent_spaces);
vfprintf(stream, trformat, ap);
@@ -333,7 +411,7 @@ void print_log(int level, const char *file, int line, int dm_errno_or_class,
vfprintf(_log_file, trformat, ap);
va_end(ap);
fprintf(_log_file, "\n");
fputc('\n', _log_file);
fflush(_log_file);
}

View File

@@ -37,8 +37,6 @@
*
*/
#include <stdio.h> /* FILE */
#include <string.h> /* strerror() */
#include <errno.h>
#define EUNCLASSIFIED -1 /* Generic error code */
@@ -67,6 +65,7 @@
#define LOG_CLASS_METADATA 0x0020 /* "metadata" */
#define LOG_CLASS_CACHE 0x0040 /* "cache" */
#define LOG_CLASS_LOCKING 0x0080 /* "locking" */
#define LOG_CLASS_LVMPOLLD 0x0100 /* "lvmpolld" */
#define log_debug(x...) LOG_LINE(_LOG_DEBUG, x)
#define log_debug_mem(x...) LOG_LINE_WITH_CLASS(_LOG_DEBUG, LOG_CLASS_MEM, x)
@@ -77,6 +76,7 @@
#define log_debug_metadata(x...) LOG_LINE_WITH_CLASS(_LOG_DEBUG, LOG_CLASS_METADATA, x)
#define log_debug_cache(x...) LOG_LINE_WITH_CLASS(_LOG_DEBUG, LOG_CLASS_CACHE, x)
#define log_debug_locking(x...) LOG_LINE_WITH_CLASS(_LOG_DEBUG, LOG_CLASS_LOCKING, x)
#define log_debug_lvmpolld(x...) LOG_LINE_WITH_CLASS(_LOG_DEBUG, LOG_CLASS_LVMPOLLD, x)
#define log_info(x...) LOG_LINE(_LOG_INFO, x)
#define log_notice(x...) LOG_LINE(_LOG_NOTICE, x)

View File

@@ -40,6 +40,7 @@ void init_indent(int indent);
void init_msg_prefix(const char *prefix);
void init_log_file(const char *log_file, int append);
void unlink_log_file(int ret);
void init_log_direct(const char *log_file, int append);
void init_log_while_suspended(int log_while_suspended);
void init_abort_on_internal_errors(int fatal);

View File

@@ -0,0 +1,356 @@
/*
* Copyright (C) 2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "lib.h"
#include "daemon-io.h"
#include "lvmpolld-client.h"
#include "lvmpolld-protocol.h"
#include "metadata-exported.h"
#include "polldaemon.h"
#include "toolcontext.h"
#include "lvm2cmd.h"
struct progress_info {
unsigned error:1;
unsigned finished:1;
int cmd_signal;
int cmd_retcode;
};
static int _lvmpolld_use;
static int _lvmpolld_connected;
static const char* _lvmpolld_socket;
static daemon_handle _lvmpolld = { .error = 0 };
static daemon_handle _lvmpolld_open(const char *socket)
{
daemon_info lvmpolld_info = {
.path = "lvmpolld",
.socket = socket ?: LVMPOLLD_SOCKET,
.protocol = LVMPOLLD_PROTOCOL,
.protocol_version = LVMPOLLD_PROTOCOL_VERSION
};
return daemon_open(lvmpolld_info);
}
void lvmpolld_set_active(int active)
{
_lvmpolld_use = active;
}
void lvmpolld_set_socket(const char *socket)
{
_lvmpolld_socket = socket;
}
static void _lvmpolld_connect_or_warn(void)
{
if (!_lvmpolld_connected && !_lvmpolld.error) {
_lvmpolld = _lvmpolld_open(_lvmpolld_socket);
if ( _lvmpolld.socket_fd >= 0 && !_lvmpolld.error) {
log_debug_lvmpolld("Sucessfully connected to lvmpolld on fd %d.", _lvmpolld.socket_fd);
_lvmpolld_connected = 1;
} else {
log_warn("WARNING: Failed to connect to lvmpolld. Proceeding with polling without using lvmpolld.");
log_warn("WARNING: Check global/use_lvmpolld in lvm.conf or the lvmpolld daemon state.");
}
}
}
int lvmpolld_use(void)
{
if (!_lvmpolld_use || !_lvmpolld_socket)
return 0;
_lvmpolld_connect_or_warn();
return _lvmpolld_connected;
}
void lvmpolld_disconnect(void)
{
if (_lvmpolld_connected) {
daemon_close(_lvmpolld);
_lvmpolld_connected = 0;
}
}
static void _explain_error_codes(int retcode)
{
switch (retcode) {
/* LVM2 return codes */
case LVM2_NO_SUCH_COMMAND:
log_error("LVM command run by lvmpolld responded with: 'No such command.'");
break;
case LVM2_INVALID_PARAMETERS:
log_error("LVM command run by lvmpolld failed due to invalid parameters.");
break;
case LVM2_PROCESSING_FAILED:
log_error("LVM command executed by lvmpolld failed.");
break;
/* lvmpolld specific return codes */
case LVMPD_RET_DUP_FAILED:
log_error("lvmpolld failed to duplicate file descriptors.");
/* fall through */
case LVMPD_RET_EXC_FAILED:
log_error("lvmpolld failed to exec() lvm binary.");
break;
default:
log_error("lvmpolld responded with unexpected return code.");
}
log_print_unless_silent("For more information see lvmpolld messages in syslog or lvmpolld log file.");
}
static void _process_error_response(daemon_reply rep)
{
if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_FAILED))
log_error("lvmpolld failed to process a request. The reason was: %s.",
daemon_reply_str(rep, "reason", "<empty>"));
else if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_EINVAL))
log_error("lvmpolld couldn't handle a request. "
"It might be due to daemon internal state. The reason was: %s.",
daemon_reply_str(rep, "reason", "<empty>"));
else
log_error("Unexpected response %s. The reason: %s.",
daemon_reply_str(rep, "response", "<empty>"),
daemon_reply_str(rep, "reason", "<empty>"));
log_print_unless_silent("For more information see lvmpolld messages in syslog or lvmpolld log file.");
}
static struct progress_info _request_progress_info(const char *uuid, unsigned abort_polling)
{
daemon_reply rep;
const char *e = getenv("LVM_SYSTEM_DIR");
struct progress_info ret = { .error = 1, .finished = 1 };
daemon_request req = daemon_request_make(LVMPD_REQ_PROGRESS);
if (!daemon_request_extend(req, LVMPD_PARM_LVID " = %s", uuid, NULL)) {
log_error("Failed to create " LVMPD_REQ_PROGRESS " request.");
goto out_req;
}
if (abort_polling &&
!daemon_request_extend(req, LVMPD_PARM_ABORT " = %d", (int64_t)abort_polling, NULL)) {
log_error("Failed to create " LVMPD_REQ_PROGRESS " request.");
goto out_req;
}
if (e &&
!(daemon_request_extend(req, LVMPD_PARM_SYSDIR " = %s",
e, NULL))) {
log_error("Failed to create " LVMPD_REQ_PROGRESS " request.");
goto out_req;
}
rep = daemon_send(_lvmpolld, req);
if (rep.error) {
log_error("Failed to process request with error %s (errno: %d).",
strerror(rep.error), rep.error);
goto out_rep;
}
if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_IN_PROGRESS)) {
ret.finished = 0;
ret.error = 0;
} else if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_FINISHED)) {
if (!strcmp(daemon_reply_str(rep, "reason", ""), LVMPD_REAS_SIGNAL))
ret.cmd_signal = daemon_reply_int(rep, LVMPD_PARM_VALUE, 0);
else
ret.cmd_retcode = daemon_reply_int(rep, LVMPD_PARM_VALUE, -1);
ret.error = 0;
} else if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_NOT_FOUND)) {
log_verbose("No polling operation in progress regarding LV %s.", uuid);
ret.error = 0;
} else {
_process_error_response(rep);
stack;
}
out_rep:
daemon_reply_destroy(rep);
out_req:
daemon_request_destroy(req);
return ret;
}
/*
* interval in seconds long
* enough for more than a year
* of waiting
*/
#define INTERV_SIZE 10
static int _process_poll_init(const struct cmd_context *cmd, const char *poll_type,
const struct poll_operation_id *id, const struct daemon_parms *parms)
{
char *str;
daemon_reply rep;
daemon_request req;
const char *e = getenv("LVM_SYSTEM_DIR");
int r = 0;
str = dm_malloc(INTERV_SIZE * sizeof(char));
if (!str)
return r;
if (snprintf(str, INTERV_SIZE, "%u", parms->interval) >= INTERV_SIZE) {
log_warn("Interval string conversion got truncated.");
str[INTERV_SIZE - 1] = '\0';
}
req = daemon_request_make(poll_type);
if (!daemon_request_extend(req, LVMPD_PARM_LVID " = %s", id->uuid,
LVMPD_PARM_VGNAME " = %s", id->vg_name,
LVMPD_PARM_LVNAME " = %s", id->lv_name,
LVMPD_PARM_INTERVAL " = %s", str,
"cmdline = %s", cmd->cmd_line, /* FIXME: debug param only */
NULL)) {
log_error("Failed to create %s request.", poll_type);
goto out_req;
}
if (parms->aborting &&
!(daemon_request_extend(req, LVMPD_PARM_ABORT " = %d", (int64_t)(parms->aborting), NULL))) {
log_error("Failed to create %s request." , poll_type);
goto out_req;
}
if (cmd->handles_missing_pvs &&
!(daemon_request_extend(req, LVMPD_PARM_HANDLE_MISSING_PVS " = %d",
(int64_t)(cmd->handles_missing_pvs), NULL))) {
log_error("Failed to create %s request." , poll_type);
goto out_req;
}
if (e &&
!(daemon_request_extend(req, LVMPD_PARM_SYSDIR " = %s",
e, NULL))) {
log_error("Failed to create %s request." , poll_type);
goto out_req;
}
rep = daemon_send(_lvmpolld, req);
if (rep.error) {
log_error("Failed to process request with error %s (errno: %d).",
strerror(rep.error), rep.error);
goto out_rep;
}
if (!strcmp(daemon_reply_str(rep, "response", ""), LVMPD_RESP_OK))
r = 1;
else {
_process_error_response(rep);
stack;
}
out_rep:
daemon_reply_destroy(rep);
out_req:
daemon_request_destroy(req);
dm_free(str);
return r;
}
int lvmpolld_poll_init(const struct cmd_context *cmd, const struct poll_operation_id *id,
const struct daemon_parms *parms)
{
int r = 0;
if (!id->uuid) {
log_error(INTERNAL_ERROR "Use of lvmpolld requires uuid set");
return 0;
}
if (!id->vg_name) {
log_error(INTERNAL_ERROR "Use of lvmpolld requires vgname set");
return 0;
}
if (!id->lv_name) {
log_error(INTERNAL_ERROR "Use of lvmpolld requires lvname set");
return 0;
}
if (parms->lv_type & PVMOVE) {
log_debug_lvmpolld("Asking lvmpolld for pvmove%s on %s/%s.",
parms->aborting ? " abort" : "", id->vg_name, id->lv_name);
r = _process_poll_init(cmd, LVMPD_REQ_PVMOVE, id, parms);
} else if (parms->lv_type & CONVERTING) {
log_debug_lvmpolld("Asking lvmpolld for mirror conversion on %s/%s.",
id->vg_name, id->lv_name);
r = _process_poll_init(cmd, LVMPD_REQ_CONVERT, id, parms);
} else if (parms->lv_type & MERGING) {
if (parms->lv_type & SNAPSHOT) {
log_debug_lvmpolld("Asking lvmpolld for snapshot merge on %s/%s.",
id->vg_name, id->lv_name);
r = _process_poll_init(cmd, LVMPD_REQ_MERGE, id, parms);
}
else if (parms->lv_type & THIN_VOLUME) {
log_debug_lvmpolld("Asking lvmpolld for thin snapshot merge on %s/%s.",
id->vg_name, id->lv_name);
r = _process_poll_init(cmd, LVMPD_REQ_MERGE_THIN, id, parms);
}
else {
log_error(INTERNAL_ERROR "Unsupported poll operation.");
}
} else
log_error(INTERNAL_ERROR "Unsupported poll operation");
return r;
}
int lvmpolld_request_info(const struct poll_operation_id *id, const struct daemon_parms *parms, unsigned *finished)
{
struct progress_info info;
int ret = 0;
*finished = 1;
if (!id->uuid) {
log_error(INTERNAL_ERROR "use of lvmpolld requires uuid being set");
return 0;
}
log_debug_lvmpolld("Asking lvmpolld for progress status of an operation on %s/%s.",
id->vg_name, id->lv_name);
info = _request_progress_info(id->uuid, parms->aborting);
*finished = info.finished;
if (info.error)
return_0;
if (info.finished) {
if (info.cmd_signal)
log_error("Command executed by lvmpolld got terminated by signal (%d).",
info.cmd_signal);
else if (info.cmd_retcode)
_explain_error_codes(info.cmd_retcode);
else {
log_verbose("Polling finished successfully.");
ret = 1;
}
} else
ret = 1;
return ret;
}

View File

@@ -0,0 +1,52 @@
/*
* Copyright (C) 2014-2015 Red Hat, Inc.
*
* This file is part of LVM2.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU Lesser General Public License v.2.1.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LVM_LVMPOLLD_CLIENT_H
#define _LVM_LVMPOLLD_CLIENT_H
# ifdef LVMPOLLD_SUPPORT
# include "daemon-client.h"
# define LVMPOLLD_SOCKET DEFAULT_RUN_DIR "/lvmpolld.socket"
struct cmd_context;
struct poll_operation_id;
struct daemon_parms;
void lvmpolld_disconnect(void);
int lvmpolld_poll_init(const struct cmd_context *cmd, const struct poll_operation_id *id,
const struct daemon_parms *parms);
int lvmpolld_request_info(const struct poll_operation_id *id, const struct daemon_parms *parms,
unsigned *finished);
int lvmpolld_use(void);
void lvmpolld_set_active(int active);
void lvmpolld_set_socket(const char *socket);
# else
# define lvmpolld_disconnect() do {} while (0)
# define lvmpolld_poll_init(cmd, id, parms) (0)
# define lvmpolld_request_info(id, parms, finished) (0)
# define lvmpolld_use() (0)
# define lvmpolld_set_active(active) do {} while (0)
# define lvmpolld_set_socket(socket) do {} while (0)
# endif /* LVMPOLLD_SUPPORT */
#endif /* _LVM_LVMPOLLD_CLIENT_H */

View File

@@ -1,6 +1,6 @@
/*
* Copyright (C) 2003-2004 Sistina Software, Inc. All rights reserved.
* Copyright (C) 2004 Red Hat, Inc. All rights reserved.
* Copyright (C) 2003-2004 Sistina Software, Inc. All rights reserved.
* Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
*
* This file is part of LVM2.
*
@@ -29,14 +29,6 @@ struct daemon_parms;
struct poll_functions {
const char *(*get_copy_name_from_lv) (const struct logical_volume *lv);
struct volume_group *(*get_copy_vg) (struct cmd_context *cmd,
const char *name,
const char *uuid);
struct logical_volume *(*get_copy_lv) (struct cmd_context *cmd,
struct volume_group *vg,
const char *name,
const char *uuid,
uint64_t lv_type);
progress_t (*poll_progress)(struct cmd_context *cmd,
struct logical_volume *lv,
const char *name,
@@ -51,6 +43,13 @@ struct poll_functions {
struct dm_list *lvs_changed);
};
struct poll_operation_id {
const char *vg_name;
const char *lv_name;
const char *display_name;
const char *uuid;
};
struct daemon_parms {
unsigned interval;
unsigned wait_before_testing;
@@ -63,13 +62,15 @@ struct daemon_parms {
struct poll_functions *poll_fns;
};
int poll_daemon(struct cmd_context *cmd, const char *name, const char *uuid,
unsigned background,
int poll_daemon(struct cmd_context *cmd, unsigned background,
uint64_t lv_type, struct poll_functions *poll_fns,
const char *progress_title);
const char *progress_title, struct poll_operation_id *id);
progress_t poll_mirror_progress(struct cmd_context *cmd,
struct logical_volume *lv, const char *name,
struct daemon_parms *parms);
int wait_for_single_lv(struct cmd_context *cmd, struct poll_operation_id *id,
struct daemon_parms *parms);
#endif

View File

@@ -322,7 +322,7 @@ int lv_cache_remove(struct logical_volume *cache_lv)
dirty_blocks = status->cache->dirty_blocks;
dm_pool_destroy(status->mem);
if (dirty_blocks) {
log_print_unless_silent("%" PRIu64 " blocks must still be flushed.",
log_print_unless_silent(FMTu64 " blocks must still be flushed.",
dirty_blocks);
sleep(1);
}
@@ -395,13 +395,13 @@ int lv_is_cache_origin(const struct logical_volume *lv)
return seg && lv_is_cache(seg->lv) && !lv_is_pending_delete(seg->lv) && (seg_lv(seg, 0) == lv);
}
int lv_cache_setpolicy(struct logical_volume *lv, struct dm_config_tree *policy)
int lv_cache_set_policy(struct logical_volume *lv, const char *name,
const struct dm_config_tree *settings)
{
struct lv_segment *seg = first_seg(lv);
const char *name;
struct dm_config_node *cn;
struct dm_config_tree *old = NULL, *new = NULL, *tmp = NULL;
int r = 0;
struct lv_segment *seg = first_seg(lv);
if (lv_is_cache(lv))
seg = first_seg(seg->pool_lv);
@@ -411,20 +411,21 @@ int lv_cache_setpolicy(struct logical_volume *lv, struct dm_config_tree *policy)
goto_out;
if (!(new = dm_config_create()))
goto_out;
new->root = policy->root;
new->root = settings->root;
old->root = seg->policy_settings;
new->cascade = old;
if (!(tmp = policy = dm_config_flatten(new)))
if (!(tmp = dm_config_flatten(new)))
goto_out;
}
if ((cn = dm_config_find_node(policy->root, "policy_settings")) &&
if ((cn = dm_config_find_node((tmp) ? tmp->root : settings->root, "policy_settings")) &&
!(seg->policy_settings = dm_config_clone_node_with_mem(lv->vg->vgmem, cn, 0)))
goto_out;
if ((name = dm_config_find_str(policy->root, "policy", NULL)) &&
!(seg->policy_name = dm_pool_strdup(lv->vg->vgmem, name)))
goto_out;
if (name && !(seg->policy_name = dm_pool_strdup(lv->vg->vgmem, name))) {
log_error("Failed to duplicate policy name.");
goto out;
}
restart: /* remove any 'default" nodes */
cn = seg->policy_settings ? seg->policy_settings->child : NULL;
@@ -439,12 +440,13 @@ restart: /* remove any 'default" nodes */
r = 1;
out:
if (old)
dm_config_destroy(old);
if (new)
dm_config_destroy(new);
if (tmp)
dm_config_destroy(tmp);
if (new)
dm_config_destroy(new);
if (old)
dm_config_destroy(old);
return r;
}

View File

@@ -20,6 +20,7 @@
#include "toolcontext.h"
#include "segtype.h"
#include "str_list.h"
#include "lvmlockd.h"
#include <time.h>
#include <sys/utsname.h>
@@ -78,7 +79,7 @@ static char *_format_pvsegs(struct dm_pool *mem, const struct lv_segment *seg,
if (range_format) {
if (dm_snprintf(extent_str, sizeof(extent_str),
"%" PRIu32, extent + seg->area_len - 1) < 0) {
FMTu32, extent + seg->area_len - 1) < 0) {
log_error("Extent number dm_snprintf failed");
return NULL;
}
@@ -873,17 +874,16 @@ int lv_set_creation(struct logical_volume *lv,
return 1;
}
char *lv_time_dup(struct dm_pool *mem, const struct logical_volume *lv)
char *lv_time_dup(struct dm_pool *mem, const struct logical_volume *lv, int iso_mode)
{
char buffer[50];
char buffer[4096];
struct tm *local_tm;
time_t ts = (time_t)lv->timestamp;
const char *format = iso_mode ? DEFAULT_TIME_FORMAT : lv->vg->cmd->time_format;
if (!ts ||
!(local_tm = localtime(&ts)) ||
/* FIXME: make this lvm.conf configurable */
!strftime(buffer, sizeof(buffer),
"%Y-%m-%d %T %z", local_tm))
!strftime(buffer, sizeof(buffer), format, local_tm))
buffer[0] = 0;
return dm_pool_strdup(mem, buffer);
@@ -911,6 +911,19 @@ static int _lv_is_exclusive(struct logical_volume *lv)
int lv_active_change(struct cmd_context *cmd, struct logical_volume *lv,
enum activation_change activate, int needs_exclusive)
{
const char *ay_with_mode = NULL;
if (activate == CHANGE_ASY)
ay_with_mode = "sh";
if (activate == CHANGE_AEY)
ay_with_mode = "ex";
if (is_change_activating(activate) &&
!lockd_lv(cmd, lv, ay_with_mode, LDLV_PERSISTENT)) {
log_error("Failed to lock logical volume %s/%s", lv->vg->name, lv->name);
return 0;
}
switch (activate) {
case CHANGE_AN:
deactivate:
@@ -953,7 +966,9 @@ exclusive:
if (!activate_lv_excl(cmd, lv))
return_0;
break;
default: /* CHANGE_AY */
case CHANGE_ASY:
case CHANGE_AY:
default:
if (needs_exclusive || _lv_is_exclusive(lv))
goto exclusive;
log_verbose("Activating logical volume \"%s\".", lv->name);
@@ -961,6 +976,10 @@ exclusive:
return_0;
}
if (!is_change_activating(activate) &&
!lockd_lv(cmd, lv, "un", LDLV_PERSISTENT))
log_error("Failed to unlock logical volume %s/%s", lv->vg->name, lv->name);
return 1;
}
@@ -1000,6 +1019,12 @@ char *lv_profile_dup(struct dm_pool *mem, const struct logical_volume *lv)
return dm_pool_strdup(mem, profile_name);
}
char *lv_lock_args_dup(struct dm_pool *mem, const struct logical_volume *lv)
{
const char *lock_args = lv->lock_args ? lv->lock_args : "";
return dm_pool_strdup(mem, lock_args);
}
/* For given LV find recursively the LV which holds lock for it */
const struct logical_volume *lv_lock_holder(const struct logical_volume *lv)
{

View File

@@ -51,7 +51,9 @@ struct logical_volume {
struct dm_list segs_using_this_lv;
uint64_t timestamp;
unsigned new_lock_args:1;
const char *hostname;
const char *lock_args;
};
struct lv_with_info_and_seg_status;
@@ -91,7 +93,7 @@ char *lvseg_monitor_dup(struct dm_pool *mem, const struct lv_segment *seg);
char *lvseg_tags_dup(const struct lv_segment *seg);
char *lvseg_devices(struct dm_pool *mem, const struct lv_segment *seg);
char *lvseg_seg_pe_ranges(struct dm_pool *mem, const struct lv_segment *seg);
char *lv_time_dup(struct dm_pool *mem, const struct logical_volume *lv);
char *lv_time_dup(struct dm_pool *mem, const struct logical_volume *lv, int iso_mode);
char *lv_host_dup(struct dm_pool *mem, const struct logical_volume *lv);
int lv_set_creation(struct logical_volume *lv,
const char *hostname, uint64_t timestamp);
@@ -103,6 +105,7 @@ const struct logical_volume *lv_lock_holder(const struct logical_volume *lv);
const struct logical_volume *lv_ondisk(const struct logical_volume *lv);
struct profile *lv_config_profile(const struct logical_volume *lv);
char *lv_profile_dup(struct dm_pool *mem, const struct logical_volume *lv);
char *lv_lock_args_dup(struct dm_pool *mem, const struct logical_volume *lv);
int lv_mirror_image_in_sync(const struct logical_volume *lv);
int lv_raid_image_in_sync(const struct logical_volume *lv);
int lv_raid_healthy(const struct logical_volume *lv);

File diff suppressed because it is too large Load Diff

View File

@@ -208,6 +208,12 @@ int check_lv_segments(struct logical_volume *lv, int complete_vg)
}
}
if (seg_is_cache_pool(seg)) {
if (!seg->policy_name) {
log_error("LV %s is missing cache policy name.", lv->name);
inc_error_count;
}
}
if (seg_is_pool(seg)) {
if (seg->area_count != 1 ||
seg_type(seg, 0) != AREA_LV) {
@@ -231,8 +237,7 @@ int check_lv_segments(struct logical_volume *lv, int complete_vg)
inc_error_count;
}
if (seg_is_pool(seg) &&
!validate_pool_chunk_size(lv->vg->cmd, seg->segtype, seg->chunk_size)) {
if (!validate_pool_chunk_size(lv->vg->cmd, seg->segtype, seg->chunk_size)) {
log_error("LV %s: %s segment %u has invalid chunk size %u.",
lv->name, seg->segtype->name, seg_count, seg->chunk_size);
inc_error_count;

Some files were not shown because too many files have changed in this diff Show More