IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Previously, even if a link is in unmanaged state, the function may
returns positive value. So, even if all managed links are in the configured
sate but do not satisfy the online criteria, e.g., IPv4 address state,
then wait-online finishes with positive value.
This makes the function always return 0 for unmanaged state. So, at
least one managed link must satisfies the online criteria.
This also adds more comments and debugging logs.
Fixes#22246.
(cherry picked from commit cd7fcda54333dc95116a434cffc591f21edddbb2)
Backward incompatible change to avoid returning 'skipped' if a condition causes
a job activation to be skipped when using StartUnitWithFlags().
Job results are broadcasted, so it is theoretically possible that existing
software could get confused if they see this result.
Replaces https://github.com/systemd/systemd/pull/22369
(cherry picked from commit ee3ae55e7537c716530b293c91f3fb9ae22a8049)
In some BIOSes, the "Number of slots or sockets available for Memory
Devices in this array" is incorrectly set to the number of memory array
that's populated.
Work-around this problem by outputting the number of sockets after
having parsed them so that consumers of this data can carry on expecting
an accurate number in this property.
This fixes the number of memory slots advertised for the HP Z600.
See https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/1686
(cherry picked from commit d48bf01636d322443f69845da2f40bea70317c92)
The complaint was that the output array was used for two kinds of data, and the
input flag decided whether this extra data should be included. The flag is
removed, and instead the old method is changed to include the data always as
a separate parameter.
This breaks backward compatibility, but the old method is effectively broken
and does not appear to be used yet, at least in open source code, by
searching on codesearch.debian.net and github.com.
Fixes#22404.
Co-authored-by: Luca Boccassi <bluca@debian.org>
(cherry picked from commit 087a799f64560bb0379b8a99ebbd9ca84804e4c3)
One is a ternary op, the other an normal conditional, but they should still use
the same order of branches.
(cherry picked from commit 573e33de078956ded078653ef3f90f93469b4dbf)
IIUC, pipefail doesn't matter for a sequence of commands joined with &&, and we
don't have any pipes. And such a failing expression also does not trigger an
exit, so the set +e/set -e were noops.
(cherry picked from commit 13391986b50e76cc58744c44ccb8124e48fd3c3d)
Since lvm 2.03.15 the transient units are started without `-r`, thus
disappearing once they finish and breaking the test (which expects them
to remain loaded after finishing). Let's accept `LoadState=not-found` as
a valid result as well to fix this.
Follow-up to: d10d562bd4b9f93130fb2b23f2b0d0d4126ea7d4
See: https://sourceware.org/git/?p=lvm2.git;a=commit;h=fbd8b0cf43dc67f51f86f060dce748f446985855
(cherry picked from commit b034f02c628057c30a2136289a1b388a6fb9a737)
The approach to use '''…'''.split() instead of a list of strings was initially
used when converting from automake because it allowed identical blocks of lines
to be used for both, making the conversion easier.
But over the years we have been using normal lists more and more, especially
when there were just a few filenames listed. This converts the rest.
No functional change.
(cherry picked from commit f1b98127ff6320648cc3dc876f3b6a5aa3af204b)
I think the current behaviour is stupid: 'x-systemd.automount,noauto' should
mean that we create the units, but don't add .mount or .automount to any targets.
Instead, we completely ignore 'noauto'. But let's at least describe the
implementation.
Text suggested by dpartrid in the bug.
Fixes#21040.
(cherry picked from commit 55fabe92e2efb1a907d4c3c93dc63b96ff5b6860)
A description of SD_BUS_VTABLE_CAPABILITY is added, and the discussion
on SD_BUS_VTABLE_UNPRIVILEGED in expanded. I think it would be nice
to add longer description of how access is checked (maybe in sd-bus(3)),
but I'm leaving that for later. I think the text that was added here
describes everything, even if tersely.
Fixes#21882.
(cherry picked from commit b4e7d7555e6266ff566a17eb5f616b365771028f)
docbook would convert the newline to a space before the first argument:
SD_BUS_METHOD_WITH_ARGS( member, args, result, handler)
And we need each item in a separate <para>, otherwise they'll all be in
one line.
(cherry picked from commit 3c080282e928a7edfcdb74feb2139ef1ac6f2ad0)
Do not print a warning in case we try to load the file system protocol for an
unsupported file system, just return EFI_SUCCESS instead.
(cherry picked from commit 178d598b5fae36fa9d54c30668771f9c626724f6)
The data type off_t can be 64 on 32 bit systems if they have large
file support. Since mmap expects a size_t with 32 bits as second
argument truncation could occur. At worst these huge files could
lead to mmaps smaller than the previous check for small files.
This in turn shouldn't have a lot of impact because mmap allocates
at page size boundaries. This also made the PAGE_ALIGN call in
open_mmap unneeded. In fact it was neither in sync with other mmap
calls nor with its own munmap counterpart in error path.
If such large files are encountered, which is very unlikely in these
code paths, treat them with the same error as if they are too small.
(cherry picked from commit 1a823cdeb9faea3849843e0b3dae0fbdd607e8b7)
Add dlopen_dw(), dlopen_elf() and dlopen_pcre2() to the dlopen test.
To enable adding dlopen_pcre2(), we move pcre2-dlopen.h/c from
src/journal to src/shared.
(cherry picked from commit ee48779e05831a0ec5e1ba5e7ed5fe92aaca1d9e)
file-hierarchy does not mention anything about the expected mountpoint
for cgroups. This may lead some software to believe it will need to
search for it (e.g. by scanning mountinfo) rather than just looking in
the canonical location.
Document the canonical mountpoint as /sys/fs/cgroup. Also provide
information on the non-default configurations, but
make it clear that in such configurations if cgroup2 is mounted (hybrid
mode) it won't have resource controllers attached. This will help
software know if it should fall back to /sys/fs/cgroup/unified or just
ignore that case.
(cherry picked from commit c8aeb9d672fac7ac2d1e350431b7b4e734b90a5d)
Python gained support for reading os-release, let's advertise it a bit more.
Our open-coded example is still useful, but let's not suggest it as the
default implementation.
I added quotes around the printed string because it looks a bit better
this way.
(cherry picked from commit ee6fd6a50922d2b27c97084e1c3f9872d495c273)
Since util-linux/util-linux@921c7da55e
libfdisk aligns the last partition (on GPT) for optimal I/O. Let's
account for that.
Fixes: #22606
(cherry picked from commit d490188b8f6da658d8086dd53b7db95735e5cca1)
The Getac UX10 tablet exposes a "CUST0000:00 0EEF:C002 Mouse" device
with BTN_LEFT/RIGHT and ABS_X/Y on the i2c bus. This causes the builtin
to incorrectly label it as pointing stick (all i2c mice are
tagged as ID_INPUT_POINTING_STICK, see 3d7ac1c655ec4).
Fix this by adding a separate variable for absolute pointing
devices like the VMmouse USB mouse or this Getac tablet - this way we
skip the pointing stick check.
See https://gitlab.freedesktop.org/libinput/libinput/-/issues/743
for recordings.
(cherry picked from commit 8ac9ec4d5c210825759d515422d3e66c20615fc1)
It turns out we can't have an Example nested in a list, and every
combination of nesting I tried looked bad either in troff or in html.
The whole example is moved to a separate section.
(cherry picked from commit e6ce19516315138d983ed4b7776d9ebd2fb296d8)
glibc now has Suggests:glibc-minimal-langpack, so we don't
need to mention it ourselves.
--repo=… is a nicer alternative to --disablerepo=* --enablerepo=….
It also avoids the issue with quoting.
Let's exclude weak deps, but install systemd-networkd, so the container
can configure networking if necessary.
(cherry picked from commit 8c4db5629c877425b2f46e414a94a8f24280a9d3)
We use 8 for blocks, and 16 for continuation in most cases afaics, hence
say so in .clang-format too
(cherry picked from commit 92148fb77766767fdb6ad6e52747317dae2aae85)
Some firmware supports sending input events for shift and logo keys.
Previously, we would suppress these with EFI_NOT_READY unless
some other key was pressed alongside, but it is really the job of the
caller to decide how to handle these.
Note that for keys that already have a printable shift representation
the reported input event will not have the shift key bits set
(Shift+a is reported as A). Should some firmware turn out to violate the
spec here we can always remove that part.
(cherry picked from commit 3f9973bf368475d1f2f7f587e7af728dd6d84e10)
In some cases there was a unlikely possibility that we would look
at an uninitialized key value.
Also, returning in case of unexpected input error cases should prevent
infinite looping.
(cherry picked from commit 1cb5d7857b205023a0473ec13df154ae2e254066)
