IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
IPv6 Neighbor discovery proxy is the IPv6 equivalent to proxy ARP for IPv4.
It is required when ISPs do not unconditional route IPv6 subnets
to their designated target, but expect neighbor solicitation messages
for every address on a link.
A variable IPv6ProxyNDPAddress= is introduced to the [Network] section,
each representing a IPv6 neighbour proxy entry in the neighbour table.
Let's clarify that RestrictAddressFamilies= and MemoryDenyWriteExecute=
are only fully effective if non-native system call architectures are
disabled, since they otherwise may be used to circumvent the filters, as
the filters aren't equally effective on all ABIs.
Fixes: #5277
We should try to keep the unbreakable lines below 80 columns.
It's not always possible of course.
Also, use the dl.fp.o alias instead of a specific mirror.
There was a missing dependency and one with the wrong type. Additionally, refer
to DefaultDependencies= once instead of twice, without a vague reference in the
first one that doesn't mention that the value matters.
Fixes#5226.
Add a bit of code that tries to get the right parameter order in place
for some of the better known architectures, and skips
restrict_namespaces for other archs.
This also bypasses the test on archs where we don't know the right
order.
In this case I didn't bother with testing the case where no filter is
applied, since that is hopefully just an issue for now, as there's
nothing stopping us from supporting more archs, we just need to know
which order is right.
Fixes: #5241
Add a new --pivot-root argument to systemd-nspawn, which specifies a
directory to pivot to / inside the container; while the original / is
pivoted to another specified directory (if provided). This adds
support for booting container images which may contain several bootable
sysroots, as is common with OSTree disk images. When these disk images
are booted on real hardware, ostree-prepare-root is run in conjunction
with sysroot.mount in the initramfs to achieve the same results.
On i386 we block the old mmap() call entirely, since we cannot properly
filter it. Thankfully it hasn't been used by glibc since quite some
time.
Fixes: #5240
The --help text currently uses the "--umount" spelling, hence to the
same in the man page too.
And let's settle on "umount" instead of "unmount" here, since most folks
probably expect that when typing in a command, as util-linux' tool is
called "umount" after all, and so is the symlink "systemd-umount" we
install.
The third paragraph of the Description already linked to
systemd.resource-control(5), but it was missing from the list of
additional options for the [Service] section.
This slightly extends the roothash loading logic to first check for a
user.verity.roothash extended attribute on the image file. If it exists,
it is used as Verity root hash and the ".roothash" file is not used.
This should improve the chance that the roothash is retained when the
file is moved around, as the data snippet is attached directly to the
image file. The field is still detached from the file payload however,
in order to make sure it may be trusted independently.
This does not replace the ".roothash" file loading, it simply adds a
second way to retrieve the data.
Extended attributes are often a poor choice for storing metadata like
this as it is usually difficult to discover for admins and users, and
hard to fix if it ever gets out of sync. However, in this case I think
it's safe as verity implies read-only access, and thus there's little
chance of it to get out of sync.
This is similar to RootDirectory= but mounts the root file system from a
block device or loopback file instead of another directory.
This reuses the image dissector code now used by nspawn and
gpt-auto-discovery.
This adds a boolean unit file setting MountAPIVFS=. If set, the three
main API VFS mounts will be mounted for the service. This only has an
effect on RootDirectory=, which it makes a ton times more useful.
(This is basically the /dev + /proc + /sys mounting code posted in the
original #4727, but rebased on current git, and with the automatic logic
replaced by explicit logic controlled by a unit file setting)
This changes the environment for services running as root from:
LANG=C.utf8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
INVOCATION_ID=ffbdec203c69499a9b83199333e31555
JOURNAL_STREAM=8:1614518
to
LANG=C.utf8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
HOME=/root
LOGNAME=root
USER=root
SHELL=/bin/sh
INVOCATION_ID=15a077963d7b4ca0b82c91dc6519f87c
JOURNAL_STREAM=8:1616718
Making the environment special for the root user complicates things
unnecessarily. This change simplifies both our logic (by making the setting
of the variables unconditional), and should also simplify the logic in
services (particularly scripts).
Fixes#5124.
$ systemd-cgls -u systemd-journald.service machine.slice
I opted for a "global" switch, instead of modifying the behaviour of just one
argument. It seem to be a more useful setting, since usually one will want to
query one or more units, and not mix unit names with paths.
Closes#5156.
'systemctl --failed' is an extremely common operation and it's nice to have
a shortcut for it.
Revert "man: don't document systemctl --failed" and add the option back to
systemctl's help and shell completion scripts.
This reverts commit 036359ba8d.
- Show example of all `systemctl status` output and documents what possible
"Loaded:", "Active" and "Enabled" values mean.
- Documents what different colors of the dot mean.
- Documents "gotcha" with load-on-demand behavior which will report units as
"loaded" even if they are only loaded to show their status.
(From @poettering: https://github.com/systemd/systemd/issues/5063#issuecomment-272115024 )
When a user is trying to understand what is going on with a restart action, it is useful to explicitly describe how the action is run. It may seem obvious, but it is helpful to be explicit so one knows there isn't a special ExecRestart= or similar option that they could be looking at.
Accept AF_VSOCK listen addresses in socket unit files. Both guest and
host can now take advantage of socket activation.
The QEMU guest agent has recently been modified to support socket
activation and can run over AF_VSOCK with this patch.
This adds a brief explanation, suggesting the use of "systemd-run -M" to
acquire exit status/code information for the invoked process.
My original plan was to propagate the exit code/status in "machinectl
shell" too, but this would mean we'd have to actively watch the shell's
runtime status, and thus would need full, highly privileged and
continious access to the container's system manager, the way
"systemd-run" does it. This would be quite a departure from the
simplistic, low-priviliged OpenShell() bus call implementation of the
current code, that really just acquires a PTY device with a shell
connected.
Moreover it would blur the lines between the two commands even further,
which I think is not desirable. Hence, from now on:
"machinectl shell" is the full-session, interactive shell for human
users
"systemd-run -M …" is the low-level tool, that supports
on-interactive mode, and is more configurable and suitable for
streaming.
Fixes: #4215
The manpage claimed that ExecStop would be followed immediately by
SIGKILL, whereas the actual behavior is to go through KillMode= and
KillSignal= first.
Fixes#4490
Fix wrong condition test in manager_etc_hosts_lookup(), which caused it to
return an IPv4 answer when an IPv6 question was asked, and vice versa.
Also only return success if we actually found any A or AAAA record.
In systemd-resolved.service(8), point out that /etc/hosts mappings only
affect address-type lookups, not other types.
The test case currently disables DNSSEC in resolved, as there is a bug
where "-t MX" fails due to "DNSSEC validation failed" even after
"downgrading to non-DNSSEC mode". This should be dropped once that bug
gets fixed.
Fixes#4801
active_slave:
Specifies the new active slave for modes that support it
(active-backup, balance-alb and balance-tlb).
primary slave:
systemd-networks currently lacks the capability to set the primary slave
in an
active-backup bonding. This is necessary if you prefer one interface
over the
other. A common example is a eth0-wlan0 bonding on a laptop where you'd
want to
switch to the wired connection whenever it's available.
Fixes: #2837
This adds a generator and a small service that will look for "roothash="
on the kernel command line and use it for setting up a very partition
for the root device.
This provides similar functionality to nspawn's existing --roothash=
switch.
This adds support for a new kernel command line option "systemd.volatile=" that
provides the same functionality that systemd-nspawn's --volatile= switch
provides, but for host systems (i.e. systems booting with a kernel).
It takes the same parameter and has the same effect.
In order to implement systemd.volatile=yes a new service
systemd-volatile-root.service is introduced that only runs in the initrd and
rearranges the root directory as needed to become a tmpfs instance. Note that
systemd.volatile=state is implemented different: it simply generates a
var.mount unit file that is part of the normal boot and has no effect on the
initrd execution.
The way this is implemented ensures that other explicit configuration for /var
can always override the effect of these options. Specifically, the var.mount
unit is generated in the "late" generator directory, so that it only is in
effect if nothing else overrides it.
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
This adds two new settings BindPaths= and BindReadOnlyPaths=. They allow
defining arbitrary bind mounts specific to particular services. This is
particularly useful for services with RootDirectory= set as this permits making
specific bits of the host directory available to chrooted services.
The two new settings follow the concepts nspawn already possess in --bind= and
--bind-ro=, as well as the .nspawn settings Bind= and BindReadOnly= (and these
latter options should probably be renamed to BindPaths= and BindReadOnlyPaths=
too).
Fixes: #3439
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
Our warning message was misleading, because we wouldn't "correct" anything,
we'd just ignore unkown escapes. Update the message.
Also, print just the extracted word (which contains the offending sequences) in
the message, instead of the whole line.
Fixes#4697.
We shouldn't just have snippets of configuration, but instead
examples which show all the parts necessary to build a certain kind
of setup, with short explanations.
%c and %r rely on settings made in the unit files themselves and hence resolve
to different values depending on whether they are used before or after Slice=.
Let's simply deprecate them and drop them from the documentation, as that's not
really possible to fix. Moreover they are actually redundant, as the same
information may always be queried from /proc/self/cgroup and /proc/1/cgroup.
(Accurately speaking, %R is actually not broken like this as it is constant.
However, let's remove all cgroup-related specifiers at once, as it is also
redundant, and doesn't really make much sense alone.)
This extends the --bind= and --overlay= syntax so that an empty string as source/upper
directory is taken as request to automatically allocate a temporary directory
below /var/tmp, whose lifetime is bound to the nspawn runtime. In combination
with the "+" path extension this permits a switch "--overlay=+/var::/var" in
order to use the container's shipped /var, combine it with a writable temporary
directory and mount it to the runtime /var of the container.
If a source path is prefixed with "+" it is taken relative to the container's
root directory instead of the host. This permits easily establishing bind and
overlay mounts based on data from the container rather than the host.
This also reworks custom_mounts_prepare(), and turns it into two functions: one
custom_mount_check_all() that remains in nspawn.c but purely verifies the
validity of the custom mounts configured. And one called
custom_mount_prepare_all() that actually does the preparation step, sorts the
custom mounts, resolves relative paths, and allocates temporary directories as
necessary.
This adds an API for retrieving an app-specific machine ID to sd-id128.
Internally it calculates HMAC-SHA256 with an 128bit app-specific ID as payload
and the machine ID as key.
(An alternative would have been to use siphash for this, which is also
cryptographically strong. However, as it only generates 64bit hashes it's not
an obvious choice for generating 128bit IDs.)
Fixes: #4667
Note: the name is "system-update-cleanup.service" rather than
"system-update-done.service", because it should not run normally, and also
because there's already "systemd-update-done.service", and having them named
so similarly would be confusing.
In https://bugzilla.redhat.com/show_bug.cgi?id=1395686 the system repeatedly
entered system-update.target on boot. Because of a packaging issue, the tool
that created the /system-update symlink could be installed without the service
unit that was supposed to perform the upgrade (and remove the symlink). In
fact, if there are no units in system-update.target, and /system-update symlink
is created, systemd always "hangs" in system-update.target. This is confusing
for users, because there's no feedback what is happening, and fixing this
requires starting an emergency shell somehow, and also knowing that the symlink
must be removed. We should be more resilient in this case, and remove the
symlink automatically ourselves, if there are no upgrade service to handle it.
This adds a service which is started after system-update.target is reached and
the symlink still exists. It nukes the symlink and reboots the machine. It
should subsequently boot into the default default.target.
This is a more general fix for
https://bugzilla.redhat.com/show_bug.cgi?id=1395686 (the packaging issue was
already fixed).
- use "service" instead of "script", because various offline updaters that we have
aren't really scripts, e.g. dnf-plugin-system-upgrade, packagekit-offline-update,
fwupd-offline-update.
- strongly recommend After=sysinit.target, Wants=sysinit.target
- clarify a bit what should happen when multiple update services are started
- replace links to the wiki with refs to the man page that replaced it.
"*-*~1" => The last day of every month
"*-02~3..5" => The third, fourth, and fifth last days in February
"Mon 05~07/1" => The last Monday in May
Resolves#3861
When trying to read keyfiles from an encrypted partition to unlock the swap,
a cyclic dependency is generated because systemd can not mount the
filesystem before it has checked if there is a swap to resume from.
Closes#3940
Given that other file systems (notably: xfs) support reflinks these days, let's
extend the file system snapshotting logic to fall back to plan copies or
reflinks when full btrfs subvolume snapshots are not available.
This essentially makes "systemd-nspawn --ephemeral" and "systemd-nspawn
--template=" available on non-btrfs subvolumes. Of course, both operations will
still be slower on non-btrfs than on btrfs (simply because reflinking each file
individually in a directory tree is still slower than doing this in one step
for a whole subvolume), but it's probably good enough for many cases, and we
should provide the users with the tools, they have to figure out what's good
for them.
Note that "machinectl clone" already had a fallback like this in place, this
patch generalizes this, and adds similar support to our other cases.
Previously --ephemeral was only supported with container trees in btrfs
subvolumes (i.e. in combination with --directory=). This adds support for
--ephemeral in conjunction with disk images (i.e. --image=) too.
As side effect this fixes that --ephemeral was accepted but ignored when using
-M on a container that turned out to be an image.
Fixes: #4664
@filesystem groups various file system operations, such as opening files and
directories for read/write and stat()ing them, plus renaming, deleting,
symlinking, hardlinking.
It's rather hard to parse the confirmation messages (enabled with
systemd.confirm_spawn=true) amongst the status messages and the kernel
ones (if enabled).
This patch gives the possibility to the user to redirect the confirmation
message to a different virtual console, either by giving its name or its path,
so those messages are separated from the other ones and easier to read.
This changes a couple of things in the namespace handling:
It merges the BindMount and TargetMount structures. They are mostly the same,
hence let's just use the same structue, and rely on C's implicit zero
initialization of partially initialized structures for the unneeded fields.
This reworks memory management of each entry a bit. It now contains one "const"
and one "malloc" path. We use the former whenever we can, but use the latter
when we have to, which is the case when we have to chase symlinks or prefix a
root directory. This means in the common case we don't actually need to
allocate any dynamic memory. To make this easy to use we add an accessor
function bind_mount_path() which retrieves the right path string from a
BindMount structure.
While we are at it, also permit "+" as prefix for dirs configured with
ReadOnlyPaths= and friends: if specified the root directory of the unit is
implicited prefixed.
This also drops set_bind_mount() and uses C99 structure initialization instead,
which I think is more readable and clarifies what is being done.
This drops append_protect_kernel_tunables() and
append_protect_kernel_modules() as append_static_mounts() is now simple enough
to be called directly.
Prefixing with the root dir is now done in an explicit step in
prefix_where_needed(). It will prepend the root directory on each entry that
doesn't have it prefixed yet. The latter is determined depending on an extra
bit in the BindMount structure.
This adds a new systemd fstab option x-systemd.mount-timeout. The option
adds a timeout value that specifies how long systemd waits for the mount
command to finish. It allows to mount huge btrfs volumes without issues.
This is equivalent to adding option TimeoutSec= to [Mount] section in a
mount unit file.
fixes#4055
Link: port to new ethtool ETHTOOL_xLINKSETTINGS
This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API,
handled by the new get_link_ksettings/set_link_ksettings .
This is a WIP version based on this [kernel
patch](https://patchwork.kernel.org/patch/8411401/).
commit 0527f1c
3f1ac7a700ommit
35afb33
core: add new RestrictNamespaces= unit file setting
Merging, not rebasing, because this touches many files and there were tree-wide cleanups in the mean time.
This new setting permits restricting whether namespaces may be created and
managed by processes started by a unit. It installs a seccomp filter blocking
certain invocations of unshare(), clone() and setns().
RestrictNamespaces=no is the default, and does not restrict namespaces in any
way. RestrictNamespaces=yes takes away the ability to create or manage any kind
of namspace. "RestrictNamespaces=mnt ipc" restricts the creation of namespaces
so that only mount and IPC namespaces may be created/managed, but no other
kind of namespaces.
This setting should be improve security quite a bit as in particular user
namespacing was a major source of CVEs in the kernel in the past, and is
accessible to unprivileged processes. With this setting the entire attack
surface may be removed for system services that do not make use of namespaces.
If execve() or socket() is filtered the service manager might get into trouble
executing the service binary, or handling any failures when this fails. Mention
this in the documentation.
The other option would be to implicitly whitelist all system calls that are
required for these codepaths. However, that appears less than desirable as this
would mean socket() and many related calls have to be whitelisted
unconditionally. As writing system call filters requires a certain level of
expertise anyway it sounds like the better option to simply document these
issues and suggest that the user disables system call filters in the service
temporarily in order to debug any such failures.
See: #3993.
@resources contains various syscalls that alter resource limits and memory and
scheduling parameters of processes. As such they are good candidates to block
for most services.
@basic-io contains a number of basic syscalls for I/O, similar to the list
seccomp v1 permitted but slightly more complete. It should be useful for
building basic whitelisting for minimal sandboxes
The system call is already part in @default hence implicitly allowed anyway.
Also, if it is actually blocked then systemd couldn't execute the service in
question anymore, since the application of seccomp is immediately followed by
it.
Various things don't work when we're running in a user namespace, but it's
pretty hard to reliably detect if that is true.
A function is added which looks at /proc/self/uid_map and returns false
if the default "0 0 UINT32_MAX" is found, and true if it finds anything else.
This misses the case where an 1:1 mapping with the full range was used, but
I don't know how to distinguish this case.
'systemd-detect-virt --private-users' is very similar to
'systemd-detect-virt --chroot', but we check for a user namespace instead.
This unifies the suggested nsswitch.conf configuration for our four NSS modules to this:
hosts: files mymachines resolve [!UNAVAIL=return] dns myhostname
Note that this restores "myhostname" to the suggested configuration of
nss-resolve for the time being, undoing 4484e1792b.
"myhostname" should probably be dropped eventually, but when we do this we
should do it in full, and not only drop it from the suggested nsswitch.conf
for one of the modules, but also drop it in source and stop referring to it
altogether.
Note that nss-resolve doesn't replace nss-myhostname in full: the former only
works if D-Bus/resolved is available for resolving the local hostname, the
latter works in all cases even if D-Bus or resolved are not in operation, hence
there's some value in keeping the line as it is right now. Note that neither
dns nor myhostname are considered at all with the above configuration unless
the resolve module actually returns UNAVAIL. Thus, even though handling of
local hostname resolving is implemented twice this way it is only executed once
for each lookup.
It may be desired by users to know what targets a particular service is
installed into. Improve user friendliness by teaching the is-enabled
command to show such information when used with --full.
This patch makes use of the newly added UnitFileFlags and adds
UNIT_FILE_DRY_RUN flag into it. Since the API had already been modified,
it's now easy to add the new dry-run feature for other commands as
well. As a next step, --dry-run could be added to systemctl, which in
turn might pave the way for a long requested dry-run feature when
running systemctl start.
This makes journald use the common option parsing functionality.
One behavioural change is implemented:
"systemd.journald.forward_to_syslog" is now equivalent to
"systemd.journald.forward_to_syslog=1".
I think it's nicer to use this way.
This commit adds a `fd` option to `StandardInput=`,
`StandardOutput=` and `StandardError=` properties in order to
connect standard streams to externally named descriptors provided
by some socket units.
This option looks for a file descriptor named as the corresponding
stream. Custom names can be specified, separated by a colon.
If multiple name-matches exist, the first matching fd will be used.
Let's avoid the overly abbreviated "cgroups" terminology. Let's instead write:
"Linux Control Groups (cgroups)" is the long form wherever the term is
introduced in prose. Use "control groups" in the short form wherever the term
is used within brief explanations.
Follow-up to: #4381
In certain situations drop-ins in /usr/lib/ are useful, for example when one package
wants to modify the behaviour of another package, or the vendor wants to tweak some
upstream unit without patching.
Drop-ins in /run are useful for testing, and may also be created by systemd itself.
Follow-up for the discussion in #2103.
There are overlapping control group resource settings for the unified and
legacy hierarchies. To help transition, the settings are translated back and
forth. When both versions of a given setting are present, the one matching the
cgroup hierarchy type in use is used. Unfortunately, this is more confusing to
use and document than necessary because there is no clear static precedence.
Update the translation logic so that the settings for the unified hierarchy are
always preferred. systemd.resource-control man page is updated to reflect the
change and reorganized so that the deprecated settings are at the end in its
own section.
Lets go further and make /lib/modules/ inaccessible for services that do
not have business with modules, this is a minor improvment but it may
help on setups with custom modules and they are limited... in regard of
kernel auto-load feature.
This change introduce NameSpaceInfo struct which we may embed later
inside ExecContext but for now lets just reduce the argument number to
setup_namespace() and merge ProtectKernelModules feature.
This is useful to turn off explicit module load and unload operations on modular
kernels. This option removes CAP_SYS_MODULE from the capability bounding set for
the unit, and installs a system call filter to block module system calls.
This option will not prevent the kernel from loading modules using the module
auto-load feature which is a system wide operation.
This adds a new invocation ID concept to the service manager. The invocation ID
identifies each runtime cycle of a unit uniquely. A new randomized 128bit ID is
generated each time a unit moves from and inactive to an activating or active
state.
The primary usecase for this concept is to connect the runtime data PID 1
maintains about a service with the offline data the journal stores about it.
Previously we'd use the unit name plus start/stop times, which however is
highly racy since the journal will generally process log data after the service
already ended.
The "invocation ID" kinda matches the "boot ID" concept of the Linux kernel,
except that it applies to an individual unit instead of the whole system.
The invocation ID is passed to the activated processes as environment variable.
It is additionally stored as extended attribute on the cgroup of the unit. The
latter is used by journald to automatically retrieve it for each log logged
message and attach it to the log entry. The environment variable is very easily
accessible, even for unprivileged services. OTOH the extended attribute is only
accessible to privileged processes (this is because cgroupfs only supports the
"trusted." xattr namespace, not "user."). The environment variable may be
altered by services, the extended attribute may not be, hence is the better
choice for the journal.
Note that reading the invocation ID off the extended attribute from journald is
racy, similar to the way reading the unit name for a logging process is.
This patch adds APIs to read the invocation ID to sd-id128:
sd_id128_get_invocation() may be used in a similar fashion to
sd_id128_get_boot().
PID1's own logging is updated to always include the invocation ID when it logs
information about a unit.
A new bus call GetUnitByInvocationID() is added that allows retrieving a bus
path to a unit by its invocation ID. The bus path is built using the invocation
ID, thus providing a path for referring to a unit that is valid only for the
current runtime cycleof it.
Outlook for the future: should the kernel eventually allow passing of cgroup
information along AF_UNIX/SOCK_DGRAM messages via a unique cgroup id, then we
can alter the invocation ID to be generated as hash from that rather than
entirely randomly. This way we can derive the invocation race-freely from the
messages.
This patch adds support to remote checksum checksum offload to VXLAN.
This patch adds RemoteCheckSumTx and RemoteCheckSumRx vxlan configuration
to enable remote checksum offload for transmit and receive on the VXLAN tunnel.
For some certification, it should not be possible to reboot the machine through ctrl-alt-delete. Currently we suggest our customers to mask the ctrl-alt-delete target, but that is obviously not enough.
Patching the keymaps to disable that is really not a way to go for them, because the settings need to be easily checked by some SCAP tools.
Put more emphasis on the routing part. This is the more interesting
thing, and also more complicated and novel.
Explain "search domains" as the special case. Also explain the effect of
~. in more detail.
SYSTEMD_UNIT_PATH=foobar: systemd-analyze verify barbar/unit.service
will load units from barbar/, foobar/, /etc/systemd/system/, etc.
SYSTEMD_UNIT_PATH= systemd-analyze verify barbar/unit.service
will load units only from barbar/, which is useful e.g. when testing
systemd's own units on a system with an older version of systemd installed.
It needs to be possible to tell apart "the nss-resolve module does not exist"
(which can happen when running foreign-architecture programs) from "the queried
DNS name failed DNSSEC validation" or other errors. So return NOTFOUND for these
cases too, and only keep UNAVAIL for the cases where we cannot handle the given
address family.
This makes it possible to configure a fallback to "dns" without breaking
DNSSEC, with "resolve [!UNAVAIL=return] dns". Add this to the manpage.
This does not change behaviour if resolved is not running, as that already
falls back to the "dns" glibc module.
Fixes#4157
DNS servers which have route-only domains should only be used for
the specified domains. Routing queries about other domains there is a privacy
violation, prone to fail (as that DNS server was not meant to be used for other
domains), and puts unnecessary load onto that server.
Introduce a new helper function dns_server_limited_domains() that checks if the
DNS server should only be used for some selected domains, i. e. has some
route-only domains without "~.". Use that when determining whether to query it
in the scope, and when writing resolv.conf.
Extend the test_route_only_dns() case to ensure that the DNS server limited to
~company does not appear in resolv.conf. Add test_route_only_dns_all_domains()
to ensure that a server that also has ~. does appear in resolv.conf as global
name server. These reproduce #3420.
Add a new test_resolved_domain_restricted_dns() test case that verifies that
domain-limited DNS servers are only being used for those domains. This
reproduces #3421.
Clarify what a "routing domain" is in the manpage.
Fixes#3420Fixes#3421
Back when external storage was initially added in 34c10968cb, this mode of
storage was added. This could have made some sense back when XZ compression was
used, and an uncompressed core on disk could be used as short-lived cache file
which does require costly decompression. But now fast LZ4 compression is used
(by default) both internally and externally, so we have duplicated storage,
using the same compression and same default maximum core size in both cases,
but with different expiration lifetimes. Even the uncompressed-external,
compressed-internal mode is not very useful: for small files, decompression
with LZ4 is fast enough not to matter, and for large files, decompression is
still relatively fast, but the disk-usage penalty is very big.
An additional problem with the two modes of storage is that it complicates
the code and makes it much harder to return a useful error message to the user
if we cannot find the core file, since if we cannot find the file we have to
check the internal storage first.
This patch drops "both" storage mode. Effectively this means that if somebody
configured coredump this way, they will get a warning about an unsupported
value for Storage, and the default of "external" will be used.
I'm pretty sure that this mode is very rarely used anyway.
There was no certainty about how the path in service file should look
like for usb functionfs activation. Because of this it was treated
differently in different places, which made this feature unusable.
This patch fixes the path to be the *mount directory* of functionfs, not
ep0 file path and clarifies in the documentation that ListenUSBFunction should be
the location of functionfs mount point, not ep0 file itself.
Make ALSA entries, latency interface, mtrr, apm/acpi, suspend interface,
filesystems configuration and IRQ tuning readonly.
Most of these interfaces now days should be in /sys but they are still
available through /proc, so just protect them. This patch does not touch
/proc/net/...
Let's merge a couple of columns, to make the table a bit shorter. This
effectively just drops whitespace, not contents, but makes the currently
humungous table much much more compact.
This reworks the documentation for ReadOnlyPaths=, ReadWritePaths=,
InaccessiblePaths=. It no longer claims that we'd follow symlinks relative to
the host file system. (Which wasn't true actually, as we didn't follow symlinks
at all in the most recent releases, and we know do follow them, but relative to
RootDirectory=).
This also replaces all references to the fact that all fs namespacing options
can be undone with enough privileges and disable propagation by a single one in
the documentation of ReadOnlyPaths= and friends, and then directs the read to
this in all other places.
Moreover a hint is added to the documentation of SystemCallFilter=, suggesting
usage of ~@mount in case any of the fs namespacing related options are used.
Let's drop the reference to the cap_from_name() function in the documentation
for the capabilities setting, as it is hardly helpful. Our readers are not
necessarily C hackers knowing the semantics of cap_from_name(). Moreover, the
strings we accept are just the plain capability names as listed in
capabilities(7) hence there's really no point in confusing the user with
anything else.
Let's make sure that services that use DynamicUser=1 cannot leave files in the
file system should the system accidentally have a world-writable directory
somewhere.
This effectively ensures that directories need to be whitelisted rather than
blacklisted for access when DynamicUser=1 is set.
