IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We planned to support (the conceptually broken) daylight saving
time/local time features in the kernel, SCSI, networking, FAT
filesystem, but it turned out to be a race we cannot win and do
not want to get involved. Systemd should not fiddle with daylight
saving time or parse timezone information itself.
Leave everything to glibc or tools like date(1) and do not make any
promises or raise expectations that systemd should handle anything
like this.
In Debian and rawhide Fedora, which have CONFIG_SCHEDSTATS=n,
bootchart creates empty files in /run/log before printing an error.
Stop doing that.
Moreover this duplicated part of the code doesn't even have error checking
so there is no error avoided by doing this early.
Reported-by: tfirg_ on IRC
We strips out NLMSG_DONE piece from a multi-part message adding into the
receive queue only the messages containing actual data.
If we send a request to the kernel for getting the forwarding database table (just an example),
the response will be a multi-part message like below:
1. FDB entry 1;
2. FDB entry 2;
3. NLMSG_DONE;
We strip out "3. NLMSG_DONE;" part and places into the receive queue a pointer to
"1. FDB entry 1; 2. FDB entry 2".
But if the FDB table is empty, the respose from the kernel will look like below:
1. NLMSG_DONE;
We strip out "1. NLMSG_DONE;" part and since there is no actual data got, it continues
waiting until reaching timeout.
Therefore, a call to "sd_rtnl_call" to send and wait for a response from kernel will exit
with timeout which is interpreted as error in communication.
This patch puts the NLMSG_DONE message on the receive queue if it ends an empty multi-part
message. This situation is detected in sd_rtnl_call() and in the callback code and NULL is
returned to the caller instead.
[tomegun:
- added/reworded commit message
- extend the same support to sd_rtnl_call_async()
- drop debug logging from library, we only do this if something is really wrong, but an
empty multi-part message is perfectly normal
- modernize the code we touch whilst we are at it]
Bug introduced in 984f1b1d1b. The state was flipped later,
but the enable/disable routine made use of the state to decide
what to do.
context_enable_ntp() and context_start_ntp() now get the desired
state directly, so the Context parameter can be removed.
We'd use the generic check for disable, and a unit-file-specific one for enable.
Use the more specific one both ways.
systemd[1]: SELinux access check scon=system_u:system_r:systemd_timedated_t:s0 tcon=system_u:system_r:init_t:s0 tclass=system perm=disable path=(null) cmdline=/usr/lib/systemd/systemd-timedated: -13
systemd[1]: SELinux access check scon=system_u:system_r:systemd_timedated_t:s0 tcon=system_u:object_r:systemd_unit_file_t:s0 tclass=service perm=enable path=/usr/lib/systemd/system/systemd-timesyncd.service cmdline=/usr/lib/systemd/systemd-timedated: -13
https://bugzilla.redhat.com/show_bug.cgi?id=1014315
timedated would set the internal status before calling out to systemd to do
the actual change. When the operation was refused because of a SELinux denial,
the state kept in timedated would get out of sync, and the second call from
timedatectl would appear to succeed.
https://bugzilla.redhat.com/show_bug.cgi?id=1014315
A failed priority is not something worth stopping boot over. Most people
have only one swap device, in which case priority is irrelevant, and even
if there is more than one swap device, they are all usable, and ignoring the
priority field should only result in some loss of performance.
The kernel will report the priority as -1 if not set, so it's easy for
people to make this mistake.
https://bugzilla.redhat.com/show_bug.cgi?id=1204336
We should never access parents, as the sysfs hierarchy is in no way
stable. Use KERNELS== etc. to match on a parent, then access it via
$attr{} (which accesses the matching device, not the current device).
We match on the evdev node, but only the parent has a "name" attribute.
Use $attr{device/name} to access it.
This is borked since 2013, I wonder how that ever worked? Maybe this will
suddenly fix all the DMI-based key detections.
Thanks to Peter Hutterer for catching this!
Allow systemd-tmpfiles to set the file/directory attributes, like
chattr(1) does. Two more commands are added: 'H' and 'h' to set the
attributes, recursively and not.
Create minimal image which runs systemd
FROM rhel7.1
RUN yum install -y /usr/bin/ps
ENV container docker
CMD [ "/usr/sbin/init" ]
When you run the container without -t, the process
/sbin/agetty --noclear --keep-baud console 115200 38400 9600
is not happy and checking the journal in the container, there is a stream of
Mar 13 04:50:15 11bf07f59fff agetty[66]: /dev/console: No such file or directory
Mar 13 04:50:25 11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:25 11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:25 11bf07f59fff systemd[1]: Starting Console Getty...
Mar 13 04:50:25 11bf07f59fff systemd[1]: Started Console Getty.
Mar 13 04:50:25 11bf07f59fff agetty[67]: /dev/console: No such file or directory
Mar 13 04:50:35 11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:35 11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:35 11bf07f59fff systemd[1]: Starting Console Getty...
Mar 13 04:50:35 11bf07f59fff systemd[1]: Started Console Getty.
Mar 13 04:50:35 11bf07f59fff agetty[74]: /dev/console: No such file or directory
Mar 13 04:50:45 11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:45 11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:45 11bf07f59fff systemd[1]: Starting Console Getty...
The comparison function we use for qsorting paths is overly indifferent.
Consider these 3 paths for sorting:
/foo
/bar
/foo/foo
qsort() may compare:
"/foo" with "/bar" => 0, indifference
"/bar" with "/foo/foo" => 0, indifference
and assume transitively that "/foo" and "/foo/foo" are also indifferent.
But this is wrong, we want "/foo" sorted before "/foo/foo".
The comparison function must be transitive.
Use path_compare(), which behaves properly.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1184016
Even if plymouth is running, it might have not displayed the splash yet,
so we'll see a few lines on fbcon when we should have otherwise had
nothing.
Plymouth integration was added to systemd in commit
6faa11140b. That same day, Plymouth got
systemd integration [0]. As such, the Plymouth integration has always
been obsolete, and was probably only for older Plymouth's. But I can't
imagine anybody running a Plymouth from 2011 with a systemd from 2015.
Remove the Plymouth/systemd integration, and let Plymouth's code tell
systemd to print the details.
[0] http://cgit.freedesktop.org/plymouth/commit/?id=537c16422cd49f1beeaab1ad39846a00018faec1
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Cc: Daniel Drake <dsd@endlessm.com>
Cc: Ray Strode <rstrode@redhat.com>
This reverts commit ba76ee29bc. As it turns
out, we need to match on driver=atkbd to not load the fixups on any
plugged USB devices.
That is, whenever you use "name:<name>:dmi:<dmi>" style matches, you
better provide a name or you're screwing things up.
Commit 628c89c introduced the "tentative" device state, which caused
devices to go from "plugged" to "tentative" on a remove uevent. This
breaks the cleanup of stale mounts (see commit 3b48ce4), as that only
applies to "dead" devices.
The "tentative" state only really makes sense on adding a device when
we don't know where it was coming from (i. e. not from udev). But when
we get a device removal from udev we definitively know that it's gone,
so change the device state back to "dead" as before 628c89c.
Currently, we always run
hwdb 'keyboard:name:$attr{name}:$attr{[dmi/id]modalias}'
as last step to match keyboards. Therefore, if nothing else matched so
far, we still try the device-name+dmi combination.
However, we have a special atkbd rule which is only run for atkbd as:
hwdb 'keyboard:$attr{[dmi/id]modalias}'
This is redundant, as we already pass the same information to hwdb in the
last fallback step.
This patch converts the hwdb "keyboard:dmi:*" matches to
"keyboard:name:*:dmi:*" matches and drops the redundant rule.
There is no reason to match on usb-modaliases, if we can use the
input-modalias to achieve the same. This commit changes the
keyboard-lookups to not be restricted to USB, but pass all modaliases to
the hwdb. Furthermore, we convert all usb:* matches to input:* matches,
thus getting rid of any ambiguity if multiple usb devices are chained (or
a bluetooth device / etc. is on top).
Note that legacy keyboard:usb:* matches are still supported, but
deprecated. If possible, please use keyboard:input:* matches instead.
This is a required step to make other input devices work with
60-keyboard.hwdb. Other bus-types are often chained on usb and we want to
avoid any ambiguity here if we incorrectly match on a USB hub.
If we don't check the error of the child process, systemd-vconsole-setup
would exit with 0 even if it could not really setup the console.
For a simple test, move loadkeys elsewhere and execute
systemd-vconsole-setup:
[root@localhost ~]# strace -f -e execve /usr/lib/systemd/systemd-vconsole-setup
execve("/usr/lib/systemd/systemd-vconsole-setup", ["/usr/lib/systemd/systemd-vconsol"...], [/* 15 vars */]) = 0
Process 171 attached
[pid 171] execve("/usr/bin/loadkeys", ["/usr/bin/loadkeys", "-q", "-C", "/dev/tty0", "br-abnt2"], [/* 15 vars */]) = -1 ENOENT (No such file or directory)
[pid 171] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=171, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
+++ exited with 0 +++
Note that loadkeys returned 1 while systemd-vconsole-setup return 0.
Since the font and keyboard setup are already serialized, refactor the
code a little bit so the functions do the wait by themselves. One change
in behavior in this patch is that we don't return early, but we do try
to setup the keyboard even if the font load failed.
