IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's generally not as valuable for non-x86 where we don't have the
history of supporting non-virtio OSes, but as time goes on it will
likely become more relevant for non-x86 arches, so let's make this
change now to get ahead of it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Otherwise going host-passthrough -> host-model -> host-passthrough
can cause libvirt validation errors or leave unintended bits in
the XML
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Remove most use of deprecated stock icons. Without it the UI will
be a lot more ugly in Fedora 36
- Remove deprecated ImageMenuItem usage, convert to regular MenuItem
- Remove most embedded button images
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If the user selects virtiofs when editting or adding a new VM, and
we don't detect that they have shared memory enabled, show
a warning label in the UI pointing them to the Memory screen.
It would be nicer if we did this for them, but to get that totally
correct would require both duplicating libvirt's shared memory
detection logic, and some surgery to the addhw wizard. This is good
enough for now
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We only ever show mapped vs squashed, and the difference is pretty
advanced, so if users need it they can use the XML editor. Upcoming
virtiofs support will also make handling this field more complicated
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Move most xml suboption testing to many-devices test
- Clarify every specific bit we are testing in the singleton tests
- Consolidate/drop/reduce a lot of tests
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Split out tpmdetails.py, following the pattern of fsdetails.py. This
adds more UI editing fields for an already attached TPM.
Move the model and version under an 'Advanced options' expander,
since we should be getting this correct by default.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The code previously was just encoding the same defaults as libvirt,
which doesn't really add anything.
Instead, let's prefer type='emulator' model='tpm-crb', which
gives the most modern virtualization friendly config. When we don't
know if that will work, we mostly leave things up to libvirt to fill
in.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Break out the CPU secure stuff from being inline in the class, most
of the logic there is not relevant to understanding what the
domcapabilities API provides
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add extra PCIe root ports to enable q35 device hotplug to work out
of the box. A typical modern linux guest has 7-8 PCI devices added
by default, so this gives plenty of wiggle room.
The smart thing to do would be to count the attached PCI devices
and add 4-5 extra, but that takes more work and isn't trivial.
The number can be overridden on the cli with:
--controller q35_pcie_root_ports=X
Use =0 to go back to the old behavior.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Adjust the UI to leave the box checked for both host-model and
host-passthrough, but host-passthrough is now what it means when
the user selects it. host-model can still be selected via the
CPU model drop down list
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When libvirt and qemu are new enough, use host-passthrough for the
CPU default. Nowadays this is recommended over host-model for most
end user usage where migration isn't a critical feature.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These have been used in the past, but no current code touches them,
so drop the parsing infrastructure
Signed-off-by: Cole Robinson <crobinso@redhat.com>
host-copy was the old default, but it's fundamentally flawed. Since
we switched to host-model default a few years back, it's not advertised
in the docs or selectable via virt-manager any more.
Have it print a warning and invoke host-model-only
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was previously discussed here:
https://listman.redhat.com/archives/virt-tools-list/2020-September/msg00017.html
For the x86 + hvm case, failure to specify an --osinfo/--os-variant
OS, and failure to detect an OS from install media, will now throw
a big error:
```
--os-variant/--osinfo OS name is required, but no value was
set or detected.
This is now a fatal error. Specifying an OS name is required
for modern, performant, and secure virtual machine defaults.
If you expected virt-install to detect an OS name from the
install media, you can set a fallback OS name with:
--osinfo detect=on,name=OSNAME
You can see a full list of possible OS name values with:
virt-install --osinfo list
If your Linux distro is not listed, try one of generic values
such as: linux2020, linux2018, linux2016
If you just need to get the old behavior back, you can use:
--osinfo detect=on,require=off
Or export VIRTINSTALL_OSINFO_DISABLE_REQUIRE=1
```
The thread goes into more detail, but basically, for x86 VMs at least,
it's unlikely you will _ever_ want the default 'generic' behavior,
which gives gives no virtio, no PCIe, no usb3, IDE disks, slow
network devices, etc.
Many people use virt-install in scripts and CI, and this may now
cause breakage. The environment variable is there to help them
get things back to normal as quick as possible, but it will still
noisy up their logs with the warning to hopefully get them to make
a useful change to their virt-install invocations.
This is limited to x86, since that's where most of our defaults
historically differ, and where we can depend on libosinfo to give
the most accurate device info. This may be relevant to change for
other KVM architectures in the future.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Historically over time it's been more likely that an issue is reported
for osinfo-db missing the usb-tablet annotation. So for example we
always enable it for the default 'generic' case. We also want to
enable it for osinfo's 'unknown' case too.
Rather than add another check for that, let's just drop the osinfo
checking entirely. Some very old OS don't support usb-tablet, but
specifying it for those cases doesn't cause issues AFAIK, and users
can override it with `--input none` if they want.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Currently we skip the warning if the user explicitly requests
`--osinfo generic`. Upcoming changes to the defaults here will make
it tempting to specify `--osinfo generic` just to make things work,
and we want to dissuade that, so enable the warning for that case too.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We are about to change the some defaults around os handling. Let's
start recommending the nicer named --osinfo more, since new error
messages are going to promote it a bit as well
Signed-off-by: Cole Robinson <crobinso@redhat.com>
I'm still seeing blog posts that recommend using
--os-type linux --os-variant XXX
Which has been a no op for a long time but is mostly harmless.
Current git would make this an error condition, but that's too
disruptive IMO. Just print a warning
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Have the UI push users more towards better defaults, by discouraging
the 'generic' entry and offering the 'linuxXXXX' entries when their
distro or OS version is not in the list.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Previously we tried to use a combination of distro class and version
number to produce a correct ordering that was independent of the
osinfo short ID. The original intent was to have correct ordering
for Windows entries in the virt-manager UI, since the short ID
values are all over the place.
Nowadays that doesn't really matter, since we weed out old
unsupported entries by default. And in the mean time, our current
sort method gives some weird results like interspersing silverblue
entries with fedora entries.
Using a natural/human sort is simpler and handles things pretty well.
Change the UI to sort by the OS label too which preserves some of
the good behavior of original method
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The canonical tool for this is `osinfo-query os`, which we still
reference in the man pages and in the list output.
However, we are about to make missing --os-variant fatal for common
usage, and I don't want to force users to install an extra tool just
to figure out what an acceptable --os-variant value is.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Move tooltip to the tree row instead of the finish button
- Some style cleanups
- Add a hack so we can hit it in the test suite
Signed-off-by: Cole Robinson <crobinso@redhat.com>
With virt-manager application, it is possible to add inactive node
devices(eg: mediated device) in host system to guest system. But it is
impossible to start a guest system with inactive node devices. Also,
it is not yet possible to start a node device with virt-manager
application. So, the user cannot use the inactive node devices.
This patch disables the "finish" button and provides a tip, when
inactive node devices are selected. So, it is not possible to add
inactive node devices to the guest system.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
https:// needs to link to the exact site, not the debian.org redirect,
otherwise we get browser cert warnings
Fixes: #360
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Commit 85307b9bd2 changed the default
value for 'accessmode' from 'passthrough' to 'mapped', but forgot to
update the documentation in the man page.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
If a domain is edited outside of virt-manager (e.g. via virsh
edit) then this is reflected in the GUI (in the domain HW details
tab). However, if domain title or description is updated outside
of virt-manager (virsh desc) then this change is not reflected.
This is simply because the corresponding event emitted by libvirt
is not listened to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
