IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
domain and gets the DC's name via a mailslot call.
Metze, I renamed wbsrv_queue_reply to wbsrv_send_reply in accordance with
irpc_send_reply. Having _queue_ here and _send_ there is a bit confusing. And
as everything is async anyway, the semantics should not be too much of a
problem.
Volker
(This used to be commit 4637964b19)
that a given set of (working) POSIX functions are available (without
prefixes to their names, etc). See lib/replace/README for a list.
Functions that behave different from their POSIX specification
(such as sys_select, sys_read, etc) have kept the sys_ prefix.
(This used to be commit 29919a7105)
- remove the echo test stuff
- abstract out the used protocol
- we have a seperate handler for the samba3 protocol now
- the backend can easy do async replies
by setting WBSRV_CALL_FLAGS_REPLY_ASYNC in wbsrv_call
and then call wbsrv_queue_reply() later
metze
(This used to be commit 32f3e68a56)
- use this for the send_queue's of the different stream_servers
to not redefine the same struct so often, and it maybe will be used
in other places too
metze
(This used to be commit b6694f067a)
Currently uses the prefix "param" for all functions and structures; suggestions for better ones are welcome...
Remove old smb.conf-parsing code from libsamba3.
(This used to be commit 414e5f7f6d)
Kerberos CCACHE into the system.
This again allows the use of the system ccache when no username is
specified, and brings more code in common between gensec_krb5 and
gensec_gssapi.
It also has a side-effect that may (or may not) be expected: If there
is a ccache, even if it is not used (perhaps the remote server didn't
want kerberos), it will change the default username.
Andrew Bartlett
(This used to be commit 6202267f6e)
as it isn't needed
- parse some more DsAddEntry() errors
- add some more attid constands so that all attribute that are needed
for a DsAddEntry in the DC Domain Join are mapped
- add value() for __ndr_size, to more attribute container, so that the caller
doesn't need to fill them in, that was the reason for getting an NDR_FAULT
metze
(This used to be commit a9a1a6f861)
what WinXP does when joining an AD domain, but in the meantime this
removes the excess unions, and uses the LSA pipe in same way XP does.
Andrew Bartlett
(This used to be commit d2789c4260)
into LDB are actually quite easy.
This brings us the users, and sets basic domain information.
You are expected to have provisioned with the settings for the target
domain, and have joined the domain as a BDC. Then simply 'net
samsync'.
Now we just need to flesh out the delta types.
Andrew Bartlett
(This used to be commit 1e0f7792bb)
Work on the talloc memory tree, as I think talloc_reference and other
things were biting me.
Crush unions in the name of code reform. ;-)
Andrew Bartlett
(This used to be commit 2eadcf4669)
- undefine anything in the win32 api or PSDK headers that Samba already defines
- map BSD error codes to Winsock Error codes
(This used to be commit d2ea619125)
LOGON_INFO
LOGON_NAME
SRV_CHECKSUM
KDC_CHECKSUM
- w2k3 also don't use the groupmembership array with rids
it uses the othersids array
metze
(This used to be commit 2286fad27d)
- move to handmodified pull/push code for PAC_BUFFER
to get the _ndr_size field and the subcontext size right
- after looking closely to the sample w2k3 PAC in our torture test (and some more in my archive)
I found out that the first uint32 before the netr_SamInfo3 was also a pointer,
(and we passed a NULL pointer there before, so I think that was the reason why the windows clients doesn't want our PAC)
w2k3 uses this for unique pointers:
ptr = ndr->ptr_count * 4;
ptr |= 0x00020000;
ndr->ptr_count;
- do one more pull/push round with the sample PAC
metze
(This used to be commit 0eee179415)
error is coming from. In this case I needed to know where a
NT_STATUS_ACCESS_DENIED was being returned, which is a very common
error, but I needed to know which place in the code was giving it
(This used to be commit 692bb1c8a1)
disabled. The main change is to turn off spnego, which cannot work at
all without nt status codes (w2k3 gives a ERRHRD:ERRgeneral error when
you try)
I also modified NT_STATUS_EQUAL() to allow for nt->dos code equality,
but only when nt status codes are disabled in smb.conf. That keeps all
the existing torture code working, while still allowing us to
correctly catch the cases where forced dos error codes are needed
The dos->ntstatus mapping table has been removed completely, as it
doesn't really make sense, is impossible to get right, and with the
new dos status handling isn't needed. When matching a nt status code
to a dos status code it makes far more sense to map from the nt code
to the dos code and compare, rather than the reverse, as the nt->dos
mapping is what windows has to do internally, so there really is a
valid mapping table.
(This used to be commit f21274e07b)
the torture code. To fix this, get rid of dos_errstr() and instead
move the strings into the nt_errstr() table, using cpp to generate the
strings
(This used to be commit 3136ad9634)
Steven Edwards <steven_ed4153@yahoo.com>.
I've moved the Win32-specific tests to win32.m4 so it does not
make any of the POSIX configure stuff more complicated.
(This used to be commit bf85fdd015)
- this is an abstraction layer for print services,
like out NTVFS subsystem for file services
- all protocol specific details are still in rpc_server/spoolss/
- like the stupid in and out Buffer handling
- checking of the r->in.server_name
- ...
- this subsystem can have multiple implementation
selected by the "ntptr providor" global-section parameter
- I currently added a "simple_ldb" backend,
that stores Printers, Forms, Ports, Monitors, ...
in the spoolss.db, and does no real printing
this backend is basicly for testing, how the spoolss protocol
works
- the interface is just a prototype and will be changed a bit
the next days or weeks, till the simple_ldb backend can
handle all calls that are used by normal w2k3/xp clients
- I'll also make the api async, as the ntvfs api
this will make things like the RemoteFindFirstPrinterChangeNotifyEx(),
that opens a connection back to the client, easier to implement,
as we should not block the whole smbd for that
- the idea is to later implement a "unix" backend
that works like the current samba3 code
- and maybe some embedded print server vendors can write there own
backend that can directly talk to a printer without having cups or something like this
- the default settings are (it currently makes no sense to change them :-):
ntptr providor = simple_ldb
spoolss database = $private_dir/spoolss.db
metze
(This used to be commit 455b5536d4)
- hooked into events system, so requests can be truly async and won't
interfere with other processing happening at the same time
- uses NTSTATUS codes for errors (previously errors were mostly
ignored). In a similar fashion to the DOS error handling, I have
reserved a range of the NTSTATUS code 32 bit space for LDAP error
codes, so a function can return a LDAP error code in a NTSTATUS
- much cleaner packet handling
(This used to be commit 2e3c660b2f)
ldif parsing code in libcli/ldap/ldap_ldif.c, and instead use the ldb
ldif code. To do that I have changed the ldap code to use 'struct
ldb_message_element' instead of 'struct ldap_attribute'. They are
essentially the same structure anyway, so by making them really the
same it will be much easier to use the ldb code in libcli/ldap/
I have also made 'struct ldb_val' the same as a DATA_BLOB, which will
simplify data handling in quite a few places (I haven't yet removed
all the code that maps between these two, that will come later)
(This used to be commit 87fc307339)
instead of a search expression. This allows our ldap server to pass
its ASN.1 parsed search expressions straight to ldb, instead of going
via strings.
- updated all the ldb modules code to handle the new interface
- got rid of the separate ldb_parse.h now that the ldb_parse
structures are exposed externally
- moved to C99 structure initialisation in ldb
- switched ldap server to using ldb_search_bytree()
(This used to be commit 96620ab2ee)
There is now a new --debug-stderr option to enable debug to STDERR.
popt isn't perfect, but the callbacks are used in all the main Samba
binaries, and should be used in the rest. This avoids duplicated
code, and ensures every binary is setup correctly.
This also ensures the setup happens early enough to have -s function,
and have a correct impact on the credentials code. (Fixing a bug that
frustrated tridge earlier today).
The only 'subtle' aspect of all this is that I'm pretty sure that the
SAMBA_COMMON popt code must be above the CREDENTIALS code, in the
popt tables.
Andrew Bartlett
(This used to be commit 50f3c2b3a2)
This makes more clear where the functions belong to. Also
the rule will be that lowercased function names are not
part of "official" libnet API (though it doesn't mean one
absolutely cannot use them).
rafal
(This used to be commit f6ef7b882a)
- if you want kerberos now, you need to unpack a lorikeet heimdal
tree in source/heimdal/. If source/heimdal/ does not exist at
configure time then all kerberos features are disabled. You cannot
use an external kerberos library for now. That may change later.
- moved lib/replace/ config stuff to lib/replace/ and create a
lib/replace/replace.h. That allows the heimdal build to use our
portability layer, and prevenets duplicate definitions of functions
like strlcat()
- if you do enable heimdal, then you will need to do 'make
HEIMDAL_EXTERNAL' before you build Samba. That should be fixed once
I explain the problem to jelmer (the problem is the inability to
set a depend without also dragging in the object list of the
dependency. We need this for building the heimdal asn1 compiler and
et compiler.
- disabled all of the m4 checks for external kerberos libraries. I
left them in place in auth/kerberos/, but disabled it in
configure.in
some of the heimdal_build/ code is still very rough, for example I
don't correctly detect the correct awk, flex, bison replacements for
heimdal_build/build_external.sh. I expect to fix that stuff up over
the next few days.
(This used to be commit d4648249b2)
management system I proposed on samba-technical a couple of days
ago. Essentially it is a very lightweight way for any code in Samba to
make IDL based rpc calls to anywhere else in the code, without the
client or server having to go to the trouble of setting up a full rpc
service.
It can be used with any of our existing IDL, but I expect it will
mostly be used for a new set of Samba specific management calls.
The LOCAL-IRPC torture test demonstrates how it can be used by calling
the echo_AddOne() call over this transport.
(This used to be commit 3d589a0995)
called from multiple backends. (ldb_sqlite3 needs it too.) Added parameter
for a callback function that determines whether an attribute needs case
folding.
- begin to prepare for sqlite3 in build process
- work-in-progress updates, on ldb_sqlite3
(This used to be commit a80bced0b9)
lpGet takes 4 forms
v = lpGet("type:parm"); gets a parametric variable
v = lpGet("share", "type:parm"); gets a parametric variable on a share
v = lpGet("parm"); gets a global variable
v = lpGet("share", "parm"); gets a share variable
in all cases a ejs object of the appropriate type for the variable is returned.
This commit also adds the function typeof() which returns the type of an object
(This used to be commit 5537a0d38d)
This includes an embedded server side scripting system called 'esp'
(see http://www.appwebserver.org/products/esp/esp.html) and javascript
based scripting language called 'esj' (see
http://www.appwebserver.org/products/ejs/ejs.html)
The justification for including this scripting language is that it
should make it much easier to write a high quality web interface for
Samba4. The scripting language can call into any Samba4 library code
(so for example it will be able to make ldb and loadparm calls), plus
it provides easy support for forms, cookies, sessions etc.
There is still quite a bit more work to do on the web server, but
there is enough here now for people to look at and comment. I will be
committing some sample web pages that test esp functionality shortly.
(This used to be commit 26f0ba92c0)
should allow us to ditch the local static storage for OIDs, as well as
fix the build on non-heimdal platforms.
Andrew Bartlett
(This used to be commit a7e2ecfac9)
Finally remove the distinction between 'krb5' and 'ms_krb5'. We now
don't do kerberos stuff twice on failure. The solution to this is
slightly more general than perhaps was really required (as this is a
special case), but it works, and I'm happy with the cleanup I achived
in the process. All modules have been updated to supply a
NULL-terminated list of OIDs.
In that process, SPNEGO code has been generalised, as I realised that
two of the functions should have been identical in behaviour.
Over in the actual modules, I have worked to remove the 'kinit' code
from gensec_krb5, and placed it in kerberos/kerberos_util.c.
The GSSAPI module has been extended to use this, so no longer requires
a manual kinit at the command line. It will soon loose the
requirement for a on-disk keytab too.
The general kerberos code has also been updated to move from
error_message() to our routine which gets the Heimdal error string
(which may be much more useful) when available.
Andrew Bartlett
(This used to be commit 0101728d8e)
This brings in a compatability layer for Samba3 in Samba4 - where we
will start to define file formats and similar details.
The 'net samdump' command uses 'password server = ' for now, and
performs a similar task to Samba3's 'net rpc samsync'.
Andrew Bartlett
(This used to be commit 550f17f992)
We need to pass the 'secure channel type' to the NETLOGON layer, which
must match the account type.
(Yes, jelmer objects to this inclusion of the kitchen sink ;-)
Andrew Bartlett
(This used to be commit 8ee208a926)
- qfsinfo (query file system information)
- appendacl (append an ACL to existing file's security descriptor and get new
full ACL)
The second one also includes an improvement to security descriptor handling
which allows to copy security descriptor. Written by Peter Novodvorsky
<peter.novodvorsky@ru.ibm.com>
Both functions have corresponding torture tests added. Tested under valgrind and
work against Samba 4 and Windows XP.
ToDo: document composite call creation process in prog_guide.txt
(This used to be commit 441cff62ac)
track the use of un-initialised values.
This change will require a recompile from clean, as the enum
describing the status of each element now has a default of
CRED_UNINITIALISED.
Andrew Bartlett
(This used to be commit 83c2eb806d)
a handle as parameter,
EnumPorts
EnumPrinterDrivers
EnumMonitors
EnumPrintProcessors
EnumPrinters
we now do cross checks between the different info levels
and sore the results in a global context,
so that we later can add cross checks between the different object types
- add idl for EnumMonitors and EnumPrintProcessors
metze
(This used to be commit 92a3721bc7)
can be enabled on the buildfarm without requiring --enable-developer
- Support tcp and udp being used on the same port
- FIx some portability issues (should fix the build on
some hosts on the buildfarm)
- Ignore setting TCP_NODELAY on (semi-)TCP sockets rather then complain about
it not being supported (saves us from a couple of error messages for each
connection that is opened)
(This used to be commit 443fb7853b)
redirects traffic (currently just IP traffic) over unix domain sockets
if the SOCKET_WRAPPER_DIR environment variable has been set.
Aim is to use this for the Samba4 torture suite on the buildfarm.
The socket_wrapper library can only be used if Samba was compiled with
--enable-developer.
test_rpc.sh passes against a local smbd with SOCKET_WRAPPER_DIR set.
(and ethereal showed no traffic whatsoever)
Stuff that still needs to be fixed in socketwrapper:
- Give ENETUNREACH if target is not localhost
- A given port number can only be used for UDP /or/ TCP, not both.
- Perhaps allow some calls to circumvent socketwrapper (do we need DNS?)
(This used to be commit f8a63a843c)
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a)
painful, so don't call lp_*() functions until the post stage (rather
than in the cli_credentails_init(), which is called in the pre stage),
and don't open the secrets.ldb looking for the machine account details
until we actually need them (well after popt is done, and we know we have the other things right).
Set the domain and realm, as well as the account and password for -P
(fetch machine password) operation.
Allow NETLOGON credentials to be stored in this structure - will allow
SCHANNEL to be made more generic.
Clarify why we don't do special checks for NULL pointers, particularly
in the anonymous check (it indicates a programmer error, not a
run-time condition).
Also make lib/credentials.c a little more consistant.
Andrew Bartlett
(This used to be commit 730e6056b7)
secrets system, and not the old system from Samba3.
This allowed the code from auth_domain to be shared - we now only
lookup the secrets.ldb in lib/credentials.c.
In order to link the resultant binary, samdb_search() has been moved
from deep inside rpc_server into lib/gendb.c, along with the existing
gendb_search_v(). The vast majority of this patch is the simple
rename that followed,
(Depending on the whole SAMDB for just this function seemed pointless,
and brought in futher dependencies, such as smbencrypt.c).
Andrew Bartlett
(This used to be commit e13c671619)
puts support for it into popt_common, adds a few utility functions
(in lib/credentials.c) and the callback functions for the command-line
(lib/cmdline/credentials.c). Comments are welcome :-)
(This used to be commit 1d49b57c50)
- Always put IID in vtables (useful for asserts)
- Add table to keep track of DCOM proxy classes
- Bunch of smaller bug fixes
(This used to be commit 26d5a0b92c)
changes:
- ldb_wrap disappears from code and become a private structure of db_wrap.c
thanks to our move to talloc in ldb code, we do not need to expose it anymore
- removal of ldb_close() function form the code
thanks to our move to talloc in ldb code, we do not need it anymore
use talloc_free() to close and free an ldb database
- some minor updates to ldb modules code to cope with the change and fix some
bugs I found out during the process
(This used to be commit d58be9e74b)
DCOM paper in lorikeet. This is the result of 1.5 months work (mainly
figuring out how things *really* work) at the end of 2004.
In general:
- Clearer distinction between COM and DCOM. DCOM is now merely
the glue between DCE/RPC+ORPC and COM. COM can also work without
DCOM now. This makes the code a lot clearer.
- Clearer distinction between NDR and DCOM. Before, NDR had a couple of
"if"s to cope with DCOM, which are now gone.
- Use "real" arguments rather then structures for function arguments in
COM, mainly because most of these calls are local so packing/unpacking
data for every call is too much overhead (both speed- and code-wise)
- Support several mechanisms to load class objects:
- from memory (e.g. part of the current executable, registered at start-up)
- from shared object files
- remotely
- Most things are now also named COM rather then DCOM because that's what it
really is. After an object is created, it no longer matters whether it
was created locally or remotely.
There is a very simple example class that contains
both a class factory and a class that implements the IStream interface.
It can be tested (locally only, remotely is broken at the moment)
by running the COM-SIMPLE smbtorture test.
Still to-do:
- Autogenerate parts of the class implementation code (using the coclass definitions in IDL)
- Test server-side
- Implement some of the common classes, add definitions for common interfaces.
(This used to be commit 71fd3e5c3a)
parameters, so callers don't need to deal directly with wins replication packet structures
- converted the NBT-WINSREPLICATION torture test to use the new APIs
(This used to be commit cec1672662)
- added a new IDL type "udlongr", which is like udlong, but with the
two uint32 halves reversed
- modified the winsrepl.idl to cope with a wider range of packets
(This used to be commit bc8d60c918)
do secure server WACK responses
- added a ldap_string_to_time() function, for converting a LDAP
formatted time to a time_t
(This used to be commit 9aa3313b3f)
Add #include "system/time.h" back (it was removed in some of these
places because the definitions were provided by <sys/time.h> on tridge's
platform.)
Andrew Bartlett
(This used to be commit 34b1da7303)
decide to reinstate the mutex code for the threads process model, I'd
like to do it a little differently. At least this gets it out of
includes.h for now.
(This used to be commit cfee0fb02e)
less likely that anyone will use pstring for new code
- got rid of winbind_client.h from includes.h. This one triggered a
huge change, as winbind_client.h was including system/filesys.h and
defining the old uint32 and uint16 types, as well as its own
pstring and fstring.
(This used to be commit 9db6c79e90)
- removed the u32 hack in events.c as I think this was only needed as
tdb.h defines u32. Metze, can you check that this hack is indeed no
longer needed on your suse system?
(This used to be commit 6f79432fe6)
- change the iface_n_*() functions to return a "const char *" instead of a "struct ipv4_addr"
I think that in general we should move towards "const char *" for
all IP addresses, as this makes IPv6 much easier, and is also easier
to debug. Andrew, when you get a chance, could you fix some of the
auth code to use strings for IPs ?
- return a NTSTATUS error on bad name queries and node status instead
of using rcode. This makes the calling code simpler.
- added low level name release code in libcli/nbt/
- use a real IP in the register and wins nbt torture tests, as w2k3
WINS server silently rejects some operations that don't come from the
IP being used (eg. it says "yes" to a release, but does not in fact
release the name)
(This used to be commit bb1ab11d8e)
- fixed a bug in the send queue handling on timeouts
- added support for handling unexpected replies (replies to the wrong
port) at the nbtsocket layer
- added separate layer 2 code for wins refresh and wins registration
(This used to be commit 2502b02898)
make it possible to add optimisations to the events code such as
keeping the next timed event in a sorted list, and using epoll for
file descriptor events.
I also removed the loop events code, as it wasn't being used anywhere,
and changed timed events to always be one-shot (as adding a new timed
event in the event handler is so easy to do if needed)
(This used to be commit d7b4b6de51)
the header, and defined on the wire as a 4 byte network byte order
IP. This means the calling code doesn't have to worry about network
byte order conversions.
(This used to be commit 72048e3717)
broadcast name registration demands per name per interface at 1 second
intervals, then send a name overwrite request and demand. Any name
conflict replies are reported.
(This used to be commit d656fba6f1)
names on the network and answers name queries. Lots of details are
still missing, but at least this now means you don't need a Samba3
nmbd to use Samba4.
missing pieces include:
- name registrations should be "shout 3 times, then demand"
- no WINS server yet
- no master browser code
(This used to be commit d7d31fdc66)
the packets it receives, but it at least shows how the server
structure will work.
To implement it I extended the libcli/nbt/ library to allow for an
incoming packet handler to be registered. That allows the nbt client
library to be used for low level processing of the nbtd server packets.
Other changes:
- made the socket library always set SO_REUSEADDR when binding to an
interface, to ensure that restarts of a server don't have to wait
for a couple of minutes.
- made the nbt port configurable. Defaults to 137, but other ports
will be useful for testing.
(This used to be commit 2fedca6adf)
themselves are run as a single process, but run as a child of the
main process when smbd is run in the standard model, and run as part
of the main process when in the single mode.
- rewrote the winbind template code to use the new task services. Also
fixed the packet queueing
- got rid of event_context_merge() as it is no longer needed
(This used to be commit 339964a596)
servers in smbd. The old code still contained a fairly bit of legacy
from the time when smbd was only handling SMB connection. The new code
gets rid of all of the smb_server specific code in smbd/, and creates
a much simpler infrastructures for new server code.
Major changes include:
- simplified the process model code a lot.
- got rid of the top level server and service structures
completely. The top level context is now the event_context. This
got rid of service.h and server.h completely (they were the most
confusing parts of the old code)
- added service_stream.[ch] for the helper functions that are
specific to stream type services (services that handle streams, and
use a logically separate process per connection)
- got rid of the builtin idle_handler code in the service logic, as
none of the servers were using it, and it can easily be handled by
a server in future by adding its own timed_event to the event
context.
- fixed some major memory leaks in the rpc server code.
- added registration of servers, rather than hard coding our list of
possible servers. This allows for servers as modules in the future.
- temporarily disabled the winbind code until I add the helper
functions for that type of server
- added error checking on service startup. If a configured server
fails to startup then smbd doesn't startup.
- cleaned up the command line handling in smbd, removing unused options
(This used to be commit cf6a46c3cb)
files don't need to match the type names in the generated headers
- with this type mapping we no longer need definitions for the
deprecated "int32", "uint8" etc form of types. We can now force
everyone to use the standard types int32_t, uint8_t etc.
- fixed all the code that used the deprecated types
- converted the IDL types "int64" and "uint64" to "dlong" and
"udlong". These are the 4 byte aligned 64 bit integers that
Microsoft internally define as two 32 bit integers in a
structure. After discussions with Ronnie Sahlberg we decided that
calling these "int64" was confusing, as it implied a true 8 byte
aligned type
- fixed all the cases where we incorrectly used things like
"NTTIME_hyper" in our C code. The generated API now uses a NTTIME for
those. The fact that it is hyper-aligned on the wire is not relevant
to the API, and should remain just a IDL property
(This used to be commit f86521677d)
complexity was that events didn't automatically cleanup
themselves. This was because the events code was written before we had
talloc destructors, so you needed to call event_remove_XX() to clean
the event out of the event lists from every piece of code that used
events. I have now added automatic event destructors, which in turn
allowed me to simplify a lot of the calling code.
The 2nd source of complexity was caused by the ref_count, which was
needed to cope with event handlers destroying events while handling
them, which meant the linked lists became invalid, so the ref_count ws
used to mark events for later destruction.
The new system is much simpler. I now have a ev->destruction_count,
which is incremented in all event destructors. The event dispatch code
checks for changes to this and handles it.
(This used to be commit a3c7417cfe)
- structures defined using IDL in nbt.idl
- build around our events structure, and talloc
- fully async
- supports all NBT packet fields as per rfc1002
- easy interfaces for name query and status
For the moment there are just a couple of test functions in
namequery.c, test_name_query() and test_name_status(). These will be
removed when we hook the new library into libcli/ fully
The new library will also be a fairly good basis for a nbt
server. Although it can't be a server as-is, I wrote it with the needs
of a server in mind (for example, extremely scalable idtree based
packet handling)
(This used to be commit ae7e625bfa)
because the version number was being auto-updated and included in all
C files. With this change it is only included where needed.
(This used to be commit 520cff73c6)
"distinguishedName" checking in that module is incorrect and should be
removed, but meanwhile, lets not make it slow down the compile of
every other module.
(This used to be commit 6534ce650b)
encapsulates all the different session setup methods, including the
multi-pass spnego code.
I have hooked this into all the places that previously used the
RAW_SESSSETUP_GENERIC method, and have removed the old
RAW_SESSSETUP_GENERIC code from clisession.c and clitree.c. A nice
side effect is that these two modules are now very simple again, back
to being "raw" session setup handling, which was what was originally
intended.
I have also used this to replace the session setup code in the
smb_composite_connect() code, and used that to build a very simple
replacement for smbcli_tree_full_connection().
As a result, smbclient, smbtorture and all our other SMB connection
code now goes via these composite async functions. That should give
them a good workout!
(This used to be commit 080d0518bc)
interface to a complete SMB connection setup. Internally it does:
- socket connection
- session request (if needed)
- negprot
- session setup
- tcon
This is the first example of a composite function that builds on other
composite components (the socket connection is a composite function,
which is used as a building block for this function). I think this
will be quite common in composite functions in the future, building up
ever more complex composite functions from smaller building blocks,
while hiding the details from the caller.
There are two things missing from this now. The first is async name
resolution routines (wins, bcast, DNS etc), and the second is that
this code currently only does a NT1 style session setup. I'll work on
adding spnego and old style session setup support next.
(This used to be commit 6bc9e17f5c)
This call uses a new IDL type, NTTIME_hyper. This is 8-byte aligned,
as the name suggests.
Expand the QuerySecret LSA calls in RPC-SAMLOGON and RPC-LSA, to
validate the behaviour of times, and of the old secrets.
Thanks to tridge for spotting the use of HYPER!
Andrew Bartlett
(This used to be commit 1fed79cb0f)
this stage does the following:
- simplifies the dcerpc_handle handling, and all the callers of it
- split out the context_id depenent state into a linked list of established contexts
- fixed some talloc handling in several rpc servers that i noticed while doing the above
(This used to be commit fde042b3fc)
use function pointers anymore
- make the module init much easier
- a lot of cleanups
don't try to read the diff in auth/ better read the new files
it passes test_echo.sh and test_rpc.sh
abartlet: please fix spelling fixes
metze
(This used to be commit 3c0d16b823)
- there is no alter_nak or alter_ack packet, its all done in an
alter_response
- auto-allocated the contex_ids
- tried to fix up the dcom code to work again with
alter_context. Jelmer, please take a look :)
(This used to be commit dd1c54add8)
- added #if TALLOC_DEPRECATED around the _p functions
- fixes the code that broke from the above
while doing this I fixed quite a number of places that were
incorrectly using the non type-safe talloc functions to use the type
safe ones. Some were even doing multiplies for array allocation, which
is potentially unsafe.
(This used to be commit 6e7754abd0)
- added gcov flags to Makefile.talloc
- expanded talloc testsuite to add a test for realloc with a child ptr
- fixed a bug in talloc_realloc() with realloc of a ptr that has child ptrs
(This used to be commit 98b5f73c1b)
they should be used in mostly all our code after
calling a talloc_* function
- the current NTSTATUS_TALLOC_CHECK() and WERR_TALLOC_CHECK()
should be replaced by this new macros
metze
(This used to be commit b6376590f4)
- added test for chained OpenX/ReadX, simulating the OS/2 workplace shell
- fixed a bug in handling chained fnum in openx and ntcreatex in the server
(yes, I'm on holiday, but this bug was annoying me ....)
(This used to be commit b3b8958a18)
- Update Samba4's kerberos code to match the 'salting' changes in
Samba3 (and many other cleanups by jra).
- Move GENSEC into the modern era of talloc destructors. This avoids
many of the memory leaks in this code, as we now can't somehow
'forget' to call the end routine.
- This required fixing some of the talloc hierarchies.
- The new krb5 seems more sensitive to getting the service name
right, so start actually setting the service name on the krb5 context.
Andrew Bartlett
(This used to be commit 278bf1a61a)
level. This is quite a strange level that we've never seen before, but
is used by the os2 workplace shell.
note w2k screws up this level when unicode is negotiated, so it only
passes the RAW-SEARCH test when you force non-unicode
(This used to be commit 25189b8fbf)
level. Interestingly, this level did now show up on our trans2 scanner
previously as we didn't have the FLAGS2_EXTENDED_ATTRIBUTES bit set in
the client code. Now that we set that bit, new levels appear in
windows servers.
(This used to be commit 0b76d405a7)
Fix small bug in regpatch
Fix segfault in regshell cmdline completion
Implement set_value and del_value in ldb backend
(This used to be commit 8e2aa58abe)
to kukks on #samba-technical for the sniffs that allowed me to work
this out
- much simpler ntvfs open generic mapping code
- added t2open create with EA torture test to RAW-OPEN test
(This used to be commit a56d95ad89)
this is mostly just a tidyup, but also adds the privilege_mask, which
I will be using shortly in ACL checking.
note that I had to move the definition of struct security_token out of
security.idl as pidl doesn't yet handle arrays of pointers, and the
usual workaround (to use a intermediate structure) would make things
too cumbersome for this structure, especially given we never encode it
to NDR.
(This used to be commit 7b446af09b)
related to filesharing. For example, in order to manipulate ACLs
properly its important to be able to call LookupSids, and to be able
to lookup what privileges a SID has.
- added 3 new commands to smbclient "lookupname", "lookupsid" and
"privileges"
(This used to be commit 8780c40f05)
- change smbcli_read/write to take void * for the buffers to match read(2)/write(2)
all this fixes a lot of gcc-4 warnings
metze
(This used to be commit b94f92bc66)
- removed the clitar code. It is unmaintained, and a horribly badly done hack
- removed client.h as it contained mostly unused definitions
- removed the unused clidfs.c code
(This used to be commit 31a7bddbb3)
definitions for security access masks, in security.idl
The previous definitions were inconsistently named, and contained many
duplicate and misleading entries. I kept finding myself tripping up
while using them.
(This used to be commit 01c0fa722f)
- added support for sticky write times after a setfileinfo, by using a
write_time field in the DosAttrib xattr structure.
(This used to be commit 4a52fae82d)
I see a new 64 bit time field which are seconds since 1601,
this will be mapped to NTTIME by th eparsing code
+#define NTTIME_1sec NTTIME
metze
(This used to be commit db35f3b0f9)
based on the current nttoken, which is completely wrong, but works as a start.
The ACL is stored in the xattr system.DosAcl, using a NDR encoded IDL
union with a version number to allow for future expansion.
pvfs does not yet check the ACL for file access. At the moment the ACL
is just query/set.
We also need to do some RPC work to allow the windows ACL editor to be
used. At the moment is queries the ACL fine, but displays an error
when it fails to map the SIDs via rpc.
(This used to be commit 3a1f20d874)
