IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is the environment that represents our supported production
setup of an active directory domain controller.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
With something like this:
samba.stdout:
[1730(16549)/1735 at 2h9m58s] samba4.blackbox.dbcheck(dc)
ERROR: Testsuite[samba4.blackbox.dbcheck(dc)]
REASON: unable to set up environment dc:local - exiting
samba.stderr:
samba: maximum runtime exceeded - terminating at 1426447450, current ts:
1426447450
samba child process 653 exited with value 0
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This shows that the previous patch is correct
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
This shows that the previous patch is correct
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
open(LDIF, "|$ldbmodify -H $ctx->{privatedir}/sam.ldb");
doesn't generate an error if the command fails...
'testallowed' is a local account here, with a dn of
CN=testallowed,CN=Users,DC=S4MEMBER instead of domain user
CN=testallowed,CN=Users,DC=samba,DC=example,DC=com
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
It was observed that adding libnss_winbind (via nss_wrapper) lets
the posix acl mapping come out slightly differently with respect
to the owner/domain admin who is not explicitly nailed down in
the original NT acl.
This patch extends the test to react to the presence of
nss_winbind in environment and adapts the expected results.
This in particular fixes the run of the test against the
(changed) plugin_s4_dc environment while keeping the possibility
to successfully run it against an env without nss_winbind.
Pair-Programmed-With: Guenther Deschner <gd@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Guenther Deschner <gd@samba.org>
There are some failures:
- The dc environment fails consistently due to duplicate uid,
(for the calling user and the domain administrator).
==> Marked as knownfail.
- The s3member environment only fails under very strange
circumstances:
- one needs to run the unix.whoami test in the
member and s3member environment for the local.nss
test to fail in the s3member:local env. The failure
is then related to builtin administrators sharing
a gid with a different group.
--> This is really really strange!!!
==> Marked as knownfail.
Pair-Programmed-With: Guenther Deschner <gd@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Mon Mar 2 19:50:55 CET 2015 on sn-devel-104
Add a secondary server path to the msdfs-src1 DFS link, and test "msdfs
shuffle referrals" behaviour during selftest using the existing
samba3.blackbox.smbclient_s3 suite.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Feb 28 01:22:36 CET 2015 on sn-devel-104
Thanks to Florian Weimer <fweimer@redhat.com> for the help to write
this torture test.
Pair-Programmed-With: Guenther Deschner <gd@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Karolin Seeger <kseeger@samba.org>
Autobuild-Date(master): Mon Feb 23 20:01:01 CET 2015 on sn-devel-104
Without exporting these new variables, we can never access or test nss_winbind
from the selftest environments.
This shows that our posixacl test probably needs fixing since now
two subtests fail against plugin_s4_dc:local. This env was just
not complete without winbind in nsswitch. The test failure is
probably due to the strangeness of the AD/DC setup that the
domain administrator uses the same uid as the root user, which
in the selftest case is overridden to be the calling user.
Guenther
Signed-off-by: Günther Deschner <gd@samba.org>
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Fri Feb 13 20:57:12 CET 2015 on sn-devel-104
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Feb 2 01:10:18 CET 2015 on sn-devel-104
Signed-off-by: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jan 30 19:59:40 CET 2015 on sn-devel-104
This tests both a UPN in our own realm, and a UPN with a non-realm suffix.
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jan 23 08:10:07 CET 2015 on sn-devel-104
This combinational test confirms the interactions between a number of differnet
kerberos flags and principal types.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
The RODC should answer some requests locally, and others it should defer to the main DC.
We can tell which KDC we talk do by the KVNO of the encrypted parts that are returned
to the KDC.
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
When setting up s3member twice in a row, the join ending up attempting kerberos
and using an old ticket in the st folder, failing with bad credentials.
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 7 03:58:10 CET 2015 on sn-devel-104
This library is always available in make test.
nss-wrapper strictly requires the linux nss api.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=9299
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
FIXME: This should be removed once we fixed adding records to the DNS
server using nsupdate!
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We have a pointer to a unixid which is sent down instead of a uid or
gid. We can use this as an in-out variable so that pdb_samba_dsdb can be
returned ID_TYPE_BOTH to cache correctly instead of leaving it as
ID_TYPE_UID or ID_TYPE_GID.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10720
Change-Id: I0cef2e419cbb337531244b7b41c708cf2ab883e3
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Change-Id: I69d060f27ea090d14405e884d1ce271975358c56
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Sun Nov 30 20:54:04 CET 2014 on sn-devel-104
Change-Id: Ife86624b53a99d48ce9f00d146b14f798c9bdb24
Signed-off-by: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Sun Nov 30 16:43:52 CET 2014 on sn-devel-104
Depends on new share "dynamic_share" being set up containing an %R
in the path= statement.
Shows we will break leases and fail to grant new ones
if we get a lease_key+client guid pair match on files
with different fileid's, as can happen on dynamic shares.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
In particular, this tests that ID_TYPE_BOTH is cached correctly.
Change-Id: I2475f22d3f4506c93b15d82b0d337d3729bbbd4c
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Thu Nov 27 05:16:53 CET 2014 on sn-devel-104
Change-Id: I984c82acc0bc82a165e8ea17d8948c465c786905
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Sat Nov 22 04:44:11 CET 2014 on sn-devel-104
Only run it when testscenarios is installed, as it depends on that.
Change-Id: I1e1284024cf94f909e585a55b8a15e33273f167b
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This test currently fails intermittently, and should be disabled until
bug 10930 is resolved.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Nov 11 10:47:08 CET 2014 on sn-devel-104
Shows attribute(stat) access open can create a file,
and subsequent attribute(stat) opens don't break oplocks.
Can be extended to explore more varients.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Oct 30 22:45:45 CET 2014 on sn-devel-104
The --with-selftest-prefix option is typically specified as argument
to './configure' ! Overwriting it for 'waf testonly' should only
happen with an explicit 'waf testonly --with-selftest-prefix=/some/path'.
This fixes a regression introduced by
commit edc1cedf93
(selftest: Actually honor --with-selftest-prefix).
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This fixes the GetPrinterDataEx(DNSMachineName) test on some machines.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Oct 30 11:35:15 CET 2014 on sn-devel-104
Change-Id: Ibf0fa1c548d376dc8d68ab8136e2532f67dd1d8a
Signed-off-by: Matthieu Patou <mat@matws.net>
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Oct 17 20:20:12 CEST 2014 on sn-devel-104
The previous code would run on empty databases.
Andrew Bartlett
Change-Id: I8f8e736b9ad475b5b3d10e32834450c76edc5ca2
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Change-Id: If4f336ef770202dcf69484b9bccc6c0c80bd5f9b
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Oct 14 09:06:05 CEST 2014 on sn-devel-104
take care of that itself.
Change-Id: I3d57f4cfafdd48751dfbd145f220dc5cf000ec3f
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
atomic entities.
This prevents any such testsuites from being skipped when run using
testr.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10874
Change-Id: I6ae8c92bb70e86a3b848b9cb3a53e2af466c3fe3
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This allows it to be scheduled independently as part of a parallel test
run, and reduces the overhead of "waf test".
Change-Id: I780fd2c4dd711ed27df73f56de98e7f1ffd53aaf
Signed-Off-By: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10875
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Anubhav Rakshit <anubhav.rakshit@gmail.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Change-Id: I12c26e807ab0d65031347bc3be609b2e87dcabb5
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
On my system this gets evaluated to 0 so in the end we detect samba to
be running cause $childpid is set to 0.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10793
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Sep 4 17:09:17 CEST 2014 on sn-devel-104
Two things help here: The join is done on the lower case name, so we
can match it in the krb5.conf, and we share the krb5.conf between the
"dc" environment and the "subdom_dc" environment. Between these two
measures, this means we can get tickets using the domain trust.
If we used cwrap for DNS queries and we had our internal DNS set up correctly,
we could avoid this (because that is not case sensitive),
but otherwise we need to get SUB.samba.example.org into the krb5.conf,
and this is harder to do an a generic way.
Andrew Bartlett
Change-Id: If378915112728aaf47aa68ce0b071a7e09d756ad
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-By: Jelmer Vernooij <jelmer@samba.org>
This allows 'samba-tool drs kcc' to be run during the environment setup.
Andrew Bartlett
Change-Id: I5d25470f1530b28be0a9413d13c48442fabb1a84
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-By: Jelmer Vernooij <jelmer@samba.org>
This way we can delete records which are not used anymore.
E.g. if the ip address changed.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=9831
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
With this change you mostly have to wait only for one second till the
tests get executed instead of ten seconds.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Aug 4 17:58:58 CEST 2014 on sn-devel-104
nmblookup3 is just a binary mapping. We shouldn't use the mapping
anymore.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Jul 29 17:09:00 CEST 2014 on sn-devel-104
(updated by abartlet to fix knownfail changes due to AD DC winbindd
use in master)
Change-Id: Iec41fbfc0f501888fd16323bf78da61aa549b4de
Signed-off-by: Garming Sam <garming@catalyst.net.nz> Reviewed-by:
Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-User(master): Kamen Mazdrashki <kamenim@samba.org>
Autobuild-Date(master): Tue Jul 15 15:59:49 CEST 2014 on sn-devel-104
make test uses
selftest.pl | subuntu-filter.py ...
FAIL_IMMEDIATELY=1 lets subuntu-filter.py exit,
which generates SIGPIPE in selftest.pl.
We should handle this just like any other signal
and teardown all environments.
This should make the teardown process more reliable/verbose.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
(Including changes to knownfail to match the new winbindd in use in each environment)
Change-Id: I9e08086eba98e95e05a99afef28315e2857aae56
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jul 4 05:19:54 CEST 2014 on sn-devel-104
This eliminates a knownfail.
Change-Id: I7331a4e62ef8c1f2a9999a78865023ae19beeaca
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Nadezhda Ivanova <nivanova@samba.org>
This is particularly useful for RODC and eliminates a knownfail.
Change-Id: Ia5089761dcabb1620eadd530dbc9b05580cddd1f
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Nadezhda Ivanova <nivanova@samba.org>
If we have more than one lock and there is any blocking lock, we need
to fail with NT_STATUS_INVALID_PARAMETER. At a quick glance I did not
find this tested, so add it.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
An invalid impersonation level is only allowed for durable handle reopen.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jun 18 09:42:43 CEST 2014 on sn-devel-104
(Including changes to knownfail to match the new winbindd in use in each environment)
Change-Id: I9e08086eba98e95e05a99afef28315e2857aae56
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Jun 16 02:53:49 CEST 2014 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Jun 6 02:25:52 CEST 2014 on sn-devel-104
These modes are useful for testing aspects of the code like the rpc proxy.
Andrew Bartlett
Change-Id: I87b3ac0df299dd176599f824f8815880470c6401
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This is better than skipping on every environment in the test
Andrew Bartlett
Change-Id: Ib4b114059d8f8bb05a9bdc2eca0f71310fc5a3bc
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
We now run wbinfo_simple additionally against plugin_s4_dc and dc
This also extends many of the tests to run against more environments,
hence the additional knownfail entries.
For winbind.wbclient, the fl2003dc environment has been selected not
to run with password history so as to allow the winindd.wbinfo test to
complete (once switched to running winbindd).
Andrew Bartlett
Change-Id: I475fd9937e515796b5e47c042a8bfa85f76441ca
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Change-Id: I5a9218294580670048636645315a9cf217618e58
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Change-Id: I41ed850b6424eac3fb8b6603d5b87c66bb77dd51
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This avoids a pile of shell-script escape pain, and fixes some tests.
Andrew Bartlett
Change-Id: Ie1d0e32ab484a5b0ddbc4073831fe6de27e38e92
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This avoids a conflict with the Samba3.pm defined member environment, and so spurious
failures in make test for the member environment dependent on test ordering.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu May 22 23:33:41 CEST 2014 on sn-devel-104
This ensures these authentication modules continue to operate correctly, and that the results are consistent.
Andrew Bartlett
Change-Id: I7f63cd93e55c6f73ceeafb14f1dc265291791803
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri May 16 12:50:44 CEST 2014 on sn-devel-104
The real invoking user's gid should be in the /etc/group file or it may
cause spurious error messages.
Signed-off-by: Simo Sorce <idra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Simo Sorce <idra@samba.org>
Autobuild-Date(master): Tue May 13 15:33:21 CEST 2014 on sn-devel-104
'smbtorture3 //host/share -U% GETADDRINFO' can get into a 100% cpu
loop, because it uses pthreads via fncall_context_init()
and socket_wrapper doesn't support threads yet.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri May 9 19:28:13 CEST 2014 on sn-devel-104
To avoid listing all the provision snapshots, we use a broader blacklist for waf dist
and a whitelist for dbcheck-oldrelease.sh
Andrew Bartlett
Change-Id: Iab0ff4be0b4287dc128a49302836a6f0f7b39678
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is needed in order to allow the ldb_*ldap module
to work with a preloaded socket wrapper.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
It is very confusing if the env var uses the same name as the define in
the source code. So prefix it with SELFTEST.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is the regression test to avoid a repeat of CVE-2013-4496
This includes confirming that badPwdCount is updated on login, not just on first failure
However the badPwdCount is not updated if the account is disabled
Note: that samr_QueryUserInfo return the effective bad_password_count in level
5, 16 and 21, while it returns the raw value in level 3.
(Sadly the s3 code does not do this correctly, so a knownfail is added)
Change-Id: I4fd8ac5c3b1357e7a98386756dac2a43eb778ecf
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Apr 2 19:30:59 CEST 2014 on sn-devel-104
Change-Id: I9529def954521bf8ab05212759a2ef6bbe9913f8
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is only done during a 1 hour allowed period, by default.
We only update bad password count when not one of the last 3 passwords
Andrew Bartlett
Change-Id: I76fd8010ce273a21efb55f9601d17b9978a0acf0
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Change-Id: I2530f08a91f9b6484203dbdaba988f2df1a04ea1
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Change-Id: I7ee562cbf1e067ed90b22e212002e88752450e34
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
smbtorture is now always the same version as the rest of Samba, and is strictly required.
Andrew Bartlett
Change-Id: I89d9c52275477177fa8a89050920ff8a2fec9288
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-By: Jelmer Vernooij <jelmer@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 26 04:20:16 CET 2014 on sn-devel-104
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 13 23:49:36 CET 2014 on sn-devel-104
This way --fail-immediately also works if a command segfaults.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add raw.search torture test on a share definition with:
vfs objects = dirsort
https://bugzilla.samba.org/show_bug.cgi?id=10406
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It's still used by default, but the following environment variables
are able to avoid it NMBD_DONT_LOG_STDOUT=1, WINBINDD_DONT_LOG_STDOUT=1
and SMBD_DONT_LOG_STDOUT=1.
It's strange that nmbd and smbd take --log-stdout, while winbindd
takes --stdout.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Sat Feb 1 01:27:18 CET 2014 on sn-devel-104
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Jan 30 23:32:13 CET 2014 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jan 17 16:45:27 CET 2014 on sn-devel-104
https://bugzilla.samba.org/show_bug.cgi?id=2662
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Jan 15 11:39:12 CET 2014 on sn-devel-104
The daemons try to set up the corefile path within logdir before the config
file was read.
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
With MALLOC_CHECK_ set to 2 in case of a failure abort() is called
silently which hopefully creates a core dump.
MALLOC_CHECK_=3 additionally gives an error message on stderr in case.
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
In particular '--db-attach' interferes badly with the io redirection of the
test environment and is superseded by the vgdb feature of valgrind.
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This is used by selftest/in_screen.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This test demonstrates a problem with byte range locks and AIO.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Dec 6 05:19:37 CET 2013 on sn-devel-104
Not fetching the latest modification time on a folder if we have read locks on it.
Prove we should just rely on the mtime value from the underlying
filesystem, even with an open handle.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=9870
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Dec 5 10:05:06 CET 2013 on sn-devel-104
Attempt to determine the underlying test share filesystem using statfs.
If the filesystem is detected and an applicable configuration is
available, then apply it to a new filesystem specific share.
Btrfs is currently the only VFS module to utilize this logic.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We should generate private keys with 0600.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10234
Pair-Programmed-With: Björn Baumbach <bb@sernet.de>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Checks against a file with attribute READONLY, and
a security descriptor denying WRITE_DATA access.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Nov 4 23:10:10 CET 2013 on sn-devel-104
This is a little benchmark test excercising parallel directory renames. With
lots of open files directory renames get pretty slow against some SMB server
implementations.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Thu Oct 24 16:15:50 CEST 2013 on sn-devel-104
The level we have to break to depend on the breakers create_disposition:
If we overwrite, we have to break to none.
This patch overloads the "op_type" field in the break message we send
across to the smbd holding the oplock with the oplock level we want to
break to. Because it depends on the create_disposition in the breaking
open, only the breaker can make that decision. We might want to use
a different mechanism for this in the future, but for now using the
op_type field seems acceptable to me.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
The level we have to break to depends on the create disposition of the
second opener. If it's overwriting, break to none. If it's not, break
to level2.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is what Windows does in this case, we don't survive that. We break
to LEVEL2 here. Fixes and more precise test to follow.
We don't survive this anymore. Re-enable later.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This uses the documeted "winbindd socket directory" parameter instead.
This came about due to the merge of the two smb.conf tables in s3 and
s4 for the Samba 4.0 release. The s4 code used a real parameter,
which caused this to be documented, whereas no automatic procedure
existed to notice the parametric option and the need to document that.
The fact that this was not used consistently in both codebases is one
of the many areas of technical debt we still need to pay off here.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
In handling RemoteFindFirstPrinterChangeNotifyEx requests, the spoolss
server can establish a "backchannel" connection to the print client, as
a mechanism for sending print notifications. This behaviour is governed
by the "print notify backchannel" smb.conf parameter.
This change sets "print notify backchannel" to "no" by default, which
sees Samba respond to RemoteFindFirstPrinterChangeNotifyEx requests with
WERR_SERVER_UNAVAILABLE. In recieving such a response, print clients can
fall back to polling for print queue changes.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Mon Oct 14 18:49:41 CEST 2013 on sn-devel-104
If delete_on_close is set, there is no oplock break. Check that.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
If delete_on_close is set, there is no oplock break. Check that.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Also calling delegation locally without credentials, as this is not really
necessary and causes selftest errors against the openldap backend.
Signed-off-by: Nadezhda Ivanova <nivanova@symas.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
teardown was bailing out before stopping slapd.
Use fork/exec to start slapd, just like samba.
Signed-off-by: Howard Chu <hyc@symas.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@symas.com>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Sep 23 01:29:10 CEST 2013 on sn-devel-104
When running selftest against a Samba3 target, the working directory is
set to st/s3dc/share. The existing "panic action" script attempts
obtain a backtrace for a paniced smbd process using GDB, which does not
locate debug info relative to the working directory.
This commit changes the S3 selftest panic action to first enter
the base source directory before attempting to obtain the backtrace,
ensuring that GDB can locate the debug info.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Sep 12 00:19:39 CEST 2013 on sn-devel-104
This needs doing even if we don't have strct allocate set. The client
should not know that we lied. Fixes smb2.oplock.batch12.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This shows that the internal server can use the dns-SERVER account.
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
We do this by having the samba-tool domain dcpromo for promoted_vampire_dc also create a
dns-SERVER account.
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Make sure we get the smb2 infolevel fixed portions right
I could not find correct #defines for the infolevels
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10106
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Aug 29 01:27:11 CEST 2013 on sn-devel-104
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Aug 23 20:53:12 CEST 2013 on sn-devel-104
We now correctly ignore the link updates if the source or target is
deleted locally.
This fixes the long-standing failure in the vampire_dc dbcheck test.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
When smbd cannot be compiled with ADS support, setting up the s3member
environment fails with:
samba: using 'standard' process model
Samba can't provide environment 's3member' at /test/samba/selftest/target/Samba.pm line 44.
Can't use string ("UNKNOWN") as a HASH ref while "strict refs" in use at /test/samba/selftest/selftest.pl line 852.
samba: EOF on stdin - terminating
Add an explicit error message for the missing ADS support to make this
easier to debug and also avoid the warning about the hash reference:
samba: using 'standard' process model
Samba can't provide environment 's3member' at /test/samba/selftest/target/Samba.pm line 44.
Unable to setup environment s3member at /test/samba/selftest/selftest.pl line 851.
smbd does not have ADS support
samba: EOF on stdin - terminating
Signed-off-by: Christof Schmitt <christof.schmitt@us.ibm.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Jul 27 08:31:14 CEST 2013 on sn-devel-104
With the winbind fixes now in master this should be more reliable.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This test should now be more reliable with the over-allocation of
RID values now fixed.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This avoids errors when a busy DC has not yet fetched a RID set, showing up
as flapping tests when users are created, such as the samr.large-dc test.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Add torture tests to probe the set of invalid
Windows EA names.
Bug 9992 - Windows error 0x800700FE when copying files with xattr names containing ":"
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jul 19 11:50:25 CEST 2013 on sn-devel-104
127.0.0.2 is used by some distributions to resolve the own hostname.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This test publishes and unpublishes a printer using setprinter(level=7).
Printer info2.attributes and info7.action flags are check at each point
to ensure MS-RPRN conformance.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This is why was relinks on install, because it is fixing these
internal variables up.
Andrew Bartlett
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Recursively inherit ACL from parent directory if no acl xattr is
found on the current file.
Use a default ACL if a non-inheriting ACL is encountered.
With this the nfs4acl_xattr.dynamic test passes.
But the nfs4acl_xattr.inheritance test results in an error because
of warnings that cause the test to pass a failed result.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is the first time we have tested the NFSv4 ACL mapping code.
Sadly most tests fail but these can be fixed from here.
This at least shows that the code does not segfault.
Andrew Bartlett
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Richard Sharpe <sharpe@samba.org>
Autobuild-Date(master): Tue May 7 19:45:36 CEST 2013 on sn-devel-104
if XSLTPROC_MANPAGES is not set then manpages won't be built so there is
no sense trying to test it.
Signed-off-by: Matthieu Patou <mat@matws.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon May 6 12:53:37 CEST 2013 on sn-devel-104
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 11 21:17:21 CEST 2013 on sn-devel-104
Use existing unmarshall and set helper functions. This allows the
smb2.setinfo.setinfo test to run against the ntvfs file server.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Apr 3 16:14:33 CEST 2013 on sn-devel-104
Zero length EA's only delete an EA, never store. Proves we should
never return zero-length EA's even if they have been set on the
POSIX side.
ntvfs server doesn't implement the FULL_EA_INFORMATION setinfo
call, so add to selftest/knownfail.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: David Disseldorp <ddiss@suse.de>
These mappings are very convenient, however because they are not
one-to-one, they lead to differences being reported when none exist,
dependent only on the order the schema searches return results in.
Sadly the time saved by the names is offset by the time wasted chasing
the 'differences' that don't exist.
This in turn fixes some tests that were previously knownfail
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This reverts commit 78594909b8 which was
needed by 7622aa16ad.
This change masked bug #9462 which was fixed by
2013bb9b4d. The issue was that the
defaults for the substituted parameters did not match the old
parameter. Changing the values in our test suite hid the issue, but
did not fix the issue.
(Additional change in the revert is to correct the expected ACL value
in posixacl.py due to changed implied inherited permissions).
Andrew Bartlett
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Mar 11 19:46:24 CET 2013 on sn-devel-104
Create a new test environment with 'idmap config DOMAIN : backend =
rfc2307'. A new test script adds LDAP records and queries them again for
the mapped uid and gid.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Mar 9 08:18:43 CET 2013 on sn-devel-104
Because perl does not assert on dereferencing an invalid hash key
we did not notice that the passwords were being set to machine, not
machineloCalMemberPass.
Andrew Bartlett
Reviewed-by: Jeremy Allison <jra@samba.org>
These are incredibly rare, and administrators running such databases
not only ask the Samba Team for help personally, they can read --help.
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
The improved upgradeprovision tests now call ldapcmp to verify the
changes made do actually bring the database in line with a fresh
provision.
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Since we open with dbwrap, it auto-converts old tdbs (which it will
rename to secrets.tdb.bak once it's done).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date(master): Wed Feb 20 07:09:19 CET 2013 on sn-devel-104
This reverts commit cf27c2fbb6.
The following concerns were raised with regard to the relocation of
tests from selftest/knownfail to selftest/skip.
Andrew Bartlett <abartlet@samba.org> wrote:
Unless there is some entirely undesirable side-effect, this patch throws
away valuable testing, because it removes the test of the testsuite for
failure (ie, does the test work!), and it removes the documentation of
the difference between the servers (if someone did add some this to the
ntvfs server, it would never be tested).
It also removes a test that if this unimplemented functionality is
called, that we don't crash and die.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Mon Feb 4 15:57:29 CET 2013 on sn-devel-104
Rather than filtering via knownfail.
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jan 31 19:39:25 CET 2013 on sn-devel-104
Unix domain socket are limited to 104 characters on Linux.
Using something like this fails as it uses more than 104 characters:
'/memdisk/autobuild/flakey/b232141/samba/bin/ab/promoted_vampire_dc/private/smbd.tmp/msg/msg.482379.2147483647'
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This ensures that upgradeprovision works as expected on a known good old database.
Andrew Bartlett
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Jan 27 11:55:54 CET 2013 on sn-devel-104
The form bash -c echo "important stuff blabla bla" && LD_LIBARY_PATH bash
is not working in screen when it's working in xterm and the in_screen
script already wrap all the command within a bash shell so there is no
need to re-force bash as the echo will execute in a bash shell
Signed-off-by: Matthieu Patou <mat@matws.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Jan 22 13:03:52 CET 2013 on sn-devel-104
If FSCTL_SRV_ENUM_SNAPS fails with NT_STATUS_NOT_SUPPORTED then skip the
test, this means we can run the full ioctl test suite as part of
autobuild.
Reviewed by: Jeremy Allison <jra@samba.org>
These tests are now expected to pass with copy-chunk support now
implemented.
This effectively reverts 632b1042ae.
Reviewed by: Jeremy Allison <jra@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jan 1 18:47:42 CET 2013 on sn-devel-104
These may not be needed, but in the meantime - ensure "make test" works again
by chmod'ing the created test directories from 0777 to 0755.
Reviewed-By: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Dec 22 02:08:33 CET 2012 on sn-devel-104
These currently fail in a corner case.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Karolin Seeger <kseeger@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Dec 11 17:56:01 CET 2012 on sn-devel-104
Note that in order to create a local group (alias), the id-allocator of
id-mapping is needed, so this can only work if winbindd is running.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
...instead of calling the two one after another each time.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
I discovered that this sid / mapping is missing by working with the Sids2Uids
code and test. I do even wonder why this test could succeed prior to my pending
changes to the winbindd sids-to-xids code, for example against the s3:local
environment, since the test tries to map the sid <domsid>-512.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
The ntlm_auth4 binary is untested, and is missing major features compared with
the source3 binary. The two are being slowly merged, but I have not finished
that.
Andrew Bartlett
Reviewed-by: Andreas Schneider <asn@samba.org>
This reverts commit 47bbf9886f.
This test appears to be stable now, but the changes in the previous
commit should allow the real error to be found if it comes back.
As requested by metze.
Andrew Bartlett
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Nov 13 01:45:04 CET 2012 on sn-devel-104
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Nov 5 00:34:56 CET 2012 on sn-devel-104
This failed more than 20 times in the last few weeks, e.g.
https://git.samba.org/autobuild.flakey/2012-10-16-0629/samba3.stdouthttps://git.samba.org/autobuild.flakey/2012-10-16-0829/samba3.stdout
[530/717 in 14m32s] samba3.rpc.lsa.privileges(s3dc)
Using seed 1350368974
Testing OpenPolicy
Testing OpenPolicy2
Testing CreateAccount
Testing Delete
Testing DeleteObject
Testing EnumAccounts
Testing LookupSids
Testing LookupNames with 7 names
LookupName of sharesec_user was unmapped
LookupName of Everyone failed to return a result
UNEXPECTED(failure): samba3.rpc.lsa.privileges.lsa.Privileges(s3dc)
REASON: _StringException: _StringException: ../source4/torture/rpc/lsa.c:319: r.out.result was STATUS_SOME_UNMAPPED, expected NT_STATUS_OK: LookupNames failed
FAILED (1 failures, 0 errors and 0 unexpected successes in 0 testsuites)
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Oct 16 10:43:02 CEST 2012 on sn-devel-104
By reduing the need for escapes and forcing the use of bash, this
seems to allow 'make testenv' to start on FreeBSD
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Sep 30 02:30:40 CEST 2012 on sn-devel-104
We would like to run this as early as possible so we get a quick
failure when there is trailing whitespace.
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Thu Sep 27 20:26:27 CEST 2012 on sn-devel-104
This avoids unlocked writes to the dns_hosts_file, and may fix some of our
issues on the build farm where large numbers of tests fail due to failed name resolution.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Sep 26 05:48:25 CEST 2012 on sn-devel-104
Too many tests are starting but never finish.
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Sat Sep 22 20:50:06 CEST 2012 on sn-devel-104
(we currently do not grant durable on reconnect when delete-on-close is set)
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Sep 11 16:22:20 CEST 2012 on sn-devel-104
The name samba_dsdb is not ideal, but it matches the primary ldb
module we use, and more importantly it avoids having '4' in the name.
We should slowly avoid using the term samba4 in long-term places like
the smb.conf because it is confusing to users given we are shipping
Samba 4.0 as an AD DC as well as all the other supported roles (domain
member/standalone server/classic DC)
Additionally, samba4 will be an odd name when we eventually release
Samba 5.0!
samba4 remains accepted as an alias to ensure existing smb.conf files
load, but to allow changes here in the future, we set the value during
the smb.conf load, and not during the provision when we are an AD DC.
This simplifies the default smb.conf for the vast majority of our
users and reduces the number of things listed in smb.conf files that
we later have to work around if we wish to change the
name/implementation of the passdb glue module again.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Sep 4 04:45:16 CEST 2012 on sn-devel-104
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Aug 27 17:43:09 CEST 2012 on sn-devel-104
This sets it for all enviornments, as it is harmless if ntvfs is used
and critical if the provision script runs in s3fs mode.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Aug 23 16:42:41 CEST 2012 on sn-devel-104
This handles the fact that smbd will rarely override the POSIX ACL enforced by
the kernel. This has caused issues with the creation of group policies by
other members of the Domain Admins group.
Andrew Bartlett
This means that any utility that calls into the VFS layer will get the
right modules.
Because we use the fake_acls backend we need to override this whole
list in Samba4.pm however.
Andrew Bartlett
Because these run as non-root, we need to avoid doing things that will
fail during the provision. The main test of the s3fs provision is the
plugin_s4_dc environment with a smb.conf that specifies vfs_fake_acls.
Andrew Bartlett
This isolates us from the OS ACL library, and allows chown to 'work'
when we are non-root. In turn, this ensures that we can test the SMB
-> POSIX layer even when the OS would refuse the set due to non-root
or simply not having acls enabled on this particular file system.
This should make a number of build farm tests much more reliable, and
allows a number more tests to pass.
Andrew Bartlett
There seems to be a difference if the initial delete_on_close flag
was set on a handle that created the file or if the handle if was
for a file that already existed.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Aug 17 21:44:24 CEST 2012 on sn-devel-104
This does not check for consistency or correctness yet, that will be
done with python unit tests. The purpose of this test is to ensure
that the vfstest wrapper doesn't crash.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Aug 16 09:32:25 CEST 2012 on sn-devel-104
This compares only the domain SIDs betwen the two servers, rather than
the full token, as well known and other SIDs may be added locally
in both cases.
This also expands the test environments this is run against to verify
this between our AD server and domain members.
Andrew Bartlett
However, due to using --domain-critical-only we have to knownfail the
vampire DC here, as we do not fill in the backlinks on non-critical
objects correctly.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Jul 6 16:54:10 CEST 2012 on sn-devel-104
Note: raw.session.reauth2 still fails:
failure: samba3.raw.session.reauth2(s3dc) [
_StringException: _StringException: ../source4/torture/raw/session.c:186: status
was NT_STATUS_ACCESS_DENIED, expected NT_STATUS_OK: 2nd open failed
But it's not critical as real clients won't reauth as anonymous.
metze
This also tests the comparison with LDAP on anonymous connections
and marks this as knownfail, while we investigate the correct
behaviour here.
Andrew Bartlett
