IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Rename the below SDHI clocks to match with the clocks used in driver.
imclk->core
clk_hs->clkh
imclk2->cd
Also re-arrange the clocks to match with the sorting order used in the
binding document.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122103905.14439-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
So correct the cache-sets info.
Fixes: 2d87061e70dea ("arm64: dts: ti: Add Support for J721E SoC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211112063155.3485777-1-peng.fan@oss.nxp.com
Fixes make dtbs_check errors for t8103-j274.dts due to missing pci
properties.
Fixes: e1bebf978151 ("arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address")
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
gpio-keys already 'inherits' the interrupts from the controller
of the specified GPIO, so having another declaration is redundant.
On >=v5.15 this started causing an oops under gpio_keys_probe as
the IRQ was already claimed.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: 418962eea358 ("arm64: dts: add device tree for Traverse Ten64 (LS1088A)")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to support memory dynamic frequency scaling (MDFS), the MBUS
binding now requires enumerating more resources. Provide them in the
device tree.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211118031841.42315-6-samuel@sholland.org
In order to support memory dynamic frequency scaling (MDFS), the MBUS
binding now requires enumerating more resources. Provide them in the
device tree.
Since the H3 and H5 have different clock divider limits, they need
separate compatibles.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211118031841.42315-5-samuel@sholland.org
i.MX8QXP A35 Cluster has 32KB Icache, 32KB Dcache and 512KB L2 Cache
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 8-way set associative
- Line size are 64bytes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8QM A53 Cluster has 32KB Icache, 32KB Dcache and 1MB L2 Cache
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 16-way set associative
- Line size are 64bytes
A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- L2Cache is 16-way set-associative
- Line size are 64bytes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8M Family use A53 Cores and has 32KB ICache with 32KB DCache.
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 16-way set associative
- Line size are 64bytes
Except i.MX8MQ has 1MB L2 Cache, others has 512KB L2 Cache.
So add the cache info in device tree and let use could see that
from /sys/devices/system/cpu/cpu[x]/cache/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Experimentation determined that HDMI CEC controller inside DW HDMI block
depends on 32k clock from RTC. If this clock is tampered with, HDMI CEC
communication starts or stops working, depending on situation.
SoC user manual doesn't say anything about CEC, so this was overlooked.
Fix this by adding dependency to RTC 32k clock.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211120073448.32480-2-jernej.skrabec@gmail.com
Tanix TX6 has a LED display driven by FD650.
Currently there is no Linux driver nor any binding for it. However, we
can at least provide I2C node in DT, so user space scripts or programs
can manually control it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211121115002.693329-1-jernej.skrabec@gmail.com
The r3 and later revisions of the Librem 5 phone include an additional switch
to control the hi846 XSHUTDOWN pin. Describe it.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CAMERA_PWR_EN controls two different power supplies that cameras will use.
The hardware killswitch controls a third one. Describe that appropriately.
The pinctrl that describes the gpio that is used in 2 places here is added
to the pmic. This is done because pmic is powered early enough to make
sure this will work.
When we would have put the same pinctrl property into the 2 regulator nodes
(instead of the pmic), we'd get:
imx8mq-pinctrl 30330000.pinctrl: pin MX8MQ_IOMUXC_GPIO1_IO00 already requested by regulator-csi-1v8; cannot claim for regulator-vcam-2v8
imx8mq-pinctrl 30330000.pinctrl: pin-10 (regulator-vcam-2v8) status -22
imx8mq-pinctrl 30330000.pinctrl: could not request pin 10 (MX8MQ_IOMUXC_GPIO1_IO00) from group camerapwrgrp on device 30330000.pinctrl
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Librem 5 r3 ("Dogwood") and r4 ("Evergreen") revisions are quite
similar. Add a shared imx8mq-librem5-r3.dtsi description to be included
in r3 and later dts files in order to avoid duplication.
This is no change in the descriptions but only refactoring.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Mini has two available USB controllers. On the
imx8mm-beacon board, USB1 is routed to a mini-USB port with
OTG functionality. USB2 is routed to a USB hub which has
three host-only ports connected to it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adding the rockchip,system-power-controller property here will use the
rk808 to power off the system.
Fixes: 09e006cfb43e ("arm64: dts: rockchip: Add basic support for Kobol's Helios64")
Signed-off-by: Florian Klink <flokli@flokli.de>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Link: https://lore.kernel.org/r/20211020095926.735938-2-flokli@flokli.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the hdd_{a,b}_power blocks present in the armbian helios64
dts. [1]
Without those powered up, no HDDs will appear (except one connected via
the m.2 slot).
>From https://wiki.kobol.io/helios64/sata/#hdd-power:
> The power delivery of the HDDs is divided into two group:
>
> HDD Rail A (Max. 3x Drives)
> HDD Rail B (Max. 2x Drives)
>
> Helios64 implements a power staggering approach where HDD Rail A will be
> powered up first, then few seconds later HDD Rail B will be powered up.
> This power control scenario is performed to reduce the inrush current
> during disk spin-up.
In practice, this power staggering approach will be included in the
bootloader (not in the kernel), as we might want to boot from a SATA
drive.
>From my experiments, if the bootloader doesn't implement the power
staggering, only one HDD will get recognized (probably cause the others
didn't boot due to few power).
Still, it makes sense to expose this block in the device-tree, so the
kernel can ensure both rails are on (and this can be shared with
u-boot).
[1] 744ea89a58/patch/kernel/archive/rockchip64-5.14/add-board-helios64.patch
Signed-off-by: Florian Klink <flokli@flokli.de>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Link: https://lore.kernel.org/r/20211020095926.735938-1-flokli@flokli.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
without ep-gpios defined u-boot does not initialise PCIe
rockchip_pcie pcie@f8000000: failed to find ep-gpios property
additionally set max-link-speed and pinctrl-names for completeness
with this patch and the ones from Florian Klink applied to the dts
file in u-boot sata drives show up in both u-boot and linux
Signed-off-by: Dennis Gilmore <dgilmore@redhat.com>
Acked-By: Florian Klink <flokli@flokli.de>
Link: https://lore.kernel.org/r/20211029005323.144652-1-dgilmore@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the 4 ports on the internal hub and define and turn on the 2.5GbE
nic.
Signed-off-by: Dennis Gilmore <dgilmore@redhat.com>
Tested-by: Florian Klink <flokli@flokli.de>
Link: https://lore.kernel.org/r/20211026150751.70115-1-dgilmore@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Correct a typo in the vin-supply property. The input supply is
always-on, so this mistake doesn't affect whether the supply is actually
enabled correctly.
Fixes: fc702ed49a86 ("arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211102182908.3409670-3-john@metanate.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Correct a typo in the vin-supply property. The input supply is
always-on, so this mistake doesn't affect whether the supply is actually
enabled correctly.
Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211102182908.3409670-2-john@metanate.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Based on commit d59c90a2400f("spi: spi-fsl-dspi: Convert
TCFQ users to XSPI FIFO mode ") and 6c1c26ecd9a3("spi:
spi-fsl-dspi: Accelerate transfers using larger word size if possible"),
on ls1043a-rdb platform, the spi work mode is changed from TCFQ
mode to XSPI mode. In order to keep the transmission sequence matches
with flash device, it is need to add delay between CS and CLK signal.
The strategy of generating delay value refers to QorIQ LS1043A
Reference Manual.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wlf,wm8962 Device Tree bindings do not specify a clock-names
property. Drop it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.
This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on NXP ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.
Signed-off-by: Alexey Min <alexey.min@gmail.com>
Co-developed-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-9-danct12@riseup.net
This lets the user sees the framebuffer console.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-8-danct12@riseup.net
This enables the volume down key as well as the power button.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-5-danct12@riseup.net
Add most of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-4-danct12@riseup.net
It's not worth duplicating the same node over and over again,
so let's keep the common bits in the pm660 DTSI, making only
changing the status and keycode necessary.
Also, disable RESIN/PWR by default just in case if there are
devices that doesn't use them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-3-danct12@riseup.net
This makes eMMC/SD device number consistent.
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-2-danct12@riseup.net
When powering up the ps8640, we need to deassert PD right
after we turn on the vdd33 regulator. Unfortunately, the vdd33
regulator takes some time (~4ms) to turn on. Add in the delay
for the vdd33 regulator so that when the driver deasserts PD
that the regulator has had time to ramp.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211115030155.9395-1-yangcong5@huaqin.corp-partner.google.com
