IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, the readout of fan speed pwm is transited into percent-based
and then pwm-based. However, the transition into percent-based is totally
unnecessary and make the final output less accurate.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
retrieving the fan speed RPM.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, both the RPM and PWM
settings need to be saved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
perform the fan speed RPM setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Attempt od settings restore and disable restore flag on restore fan mode
failure.
v2: Update fan mode to auto and fan speed to zero (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds missing edge case to smu_restore_dpm_user_profile.
v2: Don't restore fan mode auto (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The customized OD settings can be divided into two parts: those
committed ones and non-committed ones.
- For those changes which had been fed to SMU before S3/S4/Runpm
suspend kicked, they are committed changes. They should be properly
restored and fed to SMU on S3/S4/Runpm resume.
- For those non-committed changes, they are restored only without feeding
to SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SMU support for cyan_skilfish.
v2: Squash in fix (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver, if VCN is powered on, sending message
DisableAllSmuFeatures to SMU will cause SMU hang. We need to
power down VCN and JPEG before clean up SMU.
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.
V2: add support for out-of-band of other ASICs
align cached current power limit with OOB imposed
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For BACO scenario, PMFW will handle the dpm features disablement
and interaction with RLC properly. Driver involvement is unnecessary
and error prone.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some ASICs, the real dpm feature disablement job is handled by
PMFW during baco reset and custom pptable loading. Cached dpm feature
status need to be updated to pair that.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match the order of definition to the structure's declaration to
help with locating included and missing functions of the API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add smu_post_init support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable smu_hw_init for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to partially enable swSMU for yellow carp for the moment.
V2: rename smu_v13_0 to smu_v13_0_1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use soft-pptable for beige_goby
v2: fix format
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize unique_id from PF2VF under virtualization.
V2: skip smu_get_unique_id() under virtualization
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Add new interface to get FW private buffer details
v2: Drop domain check
v3: Use amdgpu_bo_kmap to get cpu address
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should return -EINVAL instead of success if the "limit" is too high.
Fixes: e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add "static" declarations for those APIs used internally.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use other APIs which are with the same functionality but much
more clean.
V2: drop mediate unneeded interface
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also drop unnecessary header file and declarations.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handlings for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RLC was put into a wrong state on runtime suspend. Thus the RLC
autoload will fail on the succeeding runtime resume. By adding an
intermediate PPSMC_MSG_PrepareMp1ForUnload(some GC hard reset involved,
designed for PnP), we can bring RLC back into the desired state.
V2: integrate INTERRUPTS_ENABLED flag clearing into current
mp1 state set routines
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set flags at the top level pmops callbacks to track
state. This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver doesn't keep the default bootup power limit and expose it
to user. As requested we add it in driver.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new MSG provide the interface for driver to enable/disable the Light Secondary Bus Reset
support from SMU. When enabled, SMU will only do minimum NBIO response to the SBR request and
leave the real HW reset to be handled by driver later. When disabled (default state),SMU will
pass the request to PSP for a HW reset
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use pp_od_clk_voltage node to enable performance determinism and GFX
clock min/max range for aldebaran. This is to avoid overload of
pp_dpm_sclk and maintain consistency in user lib interfaces.
Ex: To enable perf determinism at 900MHz max gfx clock
1) echo perf_determinism > /sys/bus/pci/devices/.../power_dpm_force_performance_level
2) echo s 1 900 > /sys/bus/pci/devices/.../pp_od_clk_voltage
3) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage
Ex: To enable min 500MHz/max 900MHz gfx clocks
1) echo manual > "/sys/bus/pci/devices/.../power_dpm_force_performance_level"
2) echo s 0 500 > "/sys/bus/pci/devices/.../pp_od_clk_voltage"
3) echo s 1 900 > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
4) echo c > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Performance Determinism is a new mode in Aldebaran where PMFW tries to
maintain sustained performance level. It can be enabled on a per-die
basis on aldebaran. To guarantee that it remains within the power cap,
a max GFX frequency needs to be specified in this mode. A new
power_dpm_force_performance_level, "perf_determinism", is defined to enable
this mode in amdgpu. The max frequency (in MHz) can be specified through
pp_dpm_sclk. The mode will be disabled once any other performance level
is chosen.
Ex: To enable perf determinism at 900Mhz max gfx clock
echo perf_determinism > /sys/bus/pci/devices/.../power_dpm_force_performance_level
echo max 900 > /sys/bus/pci/devices/.../pp_dpm_sclk
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PrepareMp1Reset and SoftReset messages are not supported on aldebaran.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GPUs that don't support fan control, set the no fan control flag so
that they don't appear in hwmon sensors.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MSG_GfxDriverReset for mode reset and retire MSG_Mode1Reset.
Centralize soc15_asic_mode1_reset() and nv_asic_mode1_reset()functions.
Add mode2_reset_is_support() for smu->ppt_funcs.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary comments, enable restore mode using
'|=' operator, fixes the alignment to improve the code
readability.
v2: Move all restoration flag check to bitwise '&' operator
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sienna cichlid needs one vf mode which allows vf to set and get
clock status from guest vm. So now expose the required interface
and allow some smu request on VF mode. Also since this asic blocked
direct MMIO access, use KIQ to send SMU request under sriov vf.
OD use same command as getting pp table which is not allowed for
sienna cichlid, so remove OD feature under sriov vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks od_vddgfx_offset, od_cclk
Context mismatch with revision v3 to patch 0003
Modified Functions
smu_sys_set_pp_table() - modifed signature to match Powerplay API set_pp_table
smu_force_performance_level() - modifed arg0 to match Powerplay API force_performance_level
smu_od_edit_dpm_table() - modifed arg0 to match Powerplay API odn_edit_dpm_table
Other Changes
smu_od_edit_dpm_table() - removed call to task(READJUST_POWER_STATE) after COMMIT_TABLE,
now handled in calling function
amdgpu_set_power_dpm_force_performance_level() - now checks thermal for swsmu systems before trying to change level
amdgpu_set_pp_od_clk_voltage() - now attempts to set fine_grain_clock_vol before swsmu edit dpm table
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix errors and warnings flagged by checkpatch
v3: Context mismatch with revision v3 to patch 0003
New Functions
smu_get_mclk - implementation of the Powerplay API function get_mclk
smu_get_sclk - implementation of the Powerplay API function get_sclk
smu_handle_dpm_task - implementation of the Powerplay API function dispatch_tasks
Modified Functions
smu_dpm_set_power_gate - - modifed arg0 to match Powerplay API set_powergating_by_smu
Other Changes
removed special smu handling in dpm functions and called through Powerplay API
call to smu_dpm_set_power_gate via Powerplay API now locks mutex for UVD and VCE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch
New Functions
smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
smu_force_ppclk_levels() - accepts Powerplay enum pp_clock_type to specify clock to change
smu_print_ppclk_levels() - accepts Powerplay enum pp_clock_type to request clock levels
amdgpu_get_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to request clock levels and allows
all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
amdgpu_set_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to set clock levels and allows
all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath
Modified Functions
smu_force_smuclk_levels - changed function name to make clear difference to smu_force_ppclk_levels
smu_force_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_force_smuclk_levels
smu_print_smuclk_levels - changed function name to make clear difference to smu_print_ppclk_levels
smu_print_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_print_smuclk_levels
smu_sys_get_gpu_metrics - modifed arg0 to match Powerplay API get_gpu_metrics
smu_get_power_profile_mode - modifed arg0 to match Powerplay API get_power_profile_mode
smu_set_power_profile_mode - modifed arg0 to match Powerplay API set_power_profile_mode
- removed arg lock_needed, mutex always locked, internal functions
can call smu_bump if they already hold lock
smu_switch_power_profile - now calls smu_bump as already holds mutex lock
smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
amdgpu_get_pp_od_clk_voltage - uses smu_print_ppclk_levels
amdgpu_{set,get}_pp_dpm_$CLK - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}
Other Changes
added 5 smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in pm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add comment to highlight assignment that changes uint32_t value to int
fix errors flagged by checkpatch.pl
New Functions
smu_get_baco_capability() - Implement Powerplay API get_asic_baco_capability
smu_baco_set_state() - Implement Powerplay API set_asic_baco_state
Modified Functions
smu_read_sensor() - modifed signature to match Powerplay API read_sensor
Other Changes
added 3 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in 5 dpm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove check for error during swsmu amdgpu_dpm_get_pp_num_states() call to match previous powerplay behaviour
v3: removed smu implementation of powerplay get_power_limit
Resolved context clashes with other commits
Modified Files
smu_set_power_limit() - modifed arg0 to match Powerplay API set_power_limit
smu_sys_get_pp_table() - modifed signature to match Powerplay API get_pp_table
smu_get_power_num_states() - modifed arg0 to match Powerplay API get_pp_num_states
smu_get_current_power_state() - modifed arg0 to match Powerplay API get_current_power_state
smu_sys_get_pp_feature_mask() - modifed signature to match Powerplay API get_ppfeature_status
smu_sys_set_pp_feature_mask() - modifed arg0 to match Powerplay API set_ppfeature_status
Other Changes
added 6 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
