IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With bigjoiner the master crtc is the one that will send out the
uapi event/etc. We want that to happen after all the slaves are
done, so let's try to do the commits in reverse order so that
the master comes last.
Even worse, the modeset helper will simply complete the commit
on the slave pipe immediately as it consider the crtc to be inactive
(it can't see our crtc_state->hw.active/etc.).
With regular sync updates this generally doesn't matter all that
much as the slave pipe should typically finish its work during the
same frame as the master pipe. However in case the slave pipe's commit
slips into the next frame we end up in a bit of trouble. This is most
visible with either async flips (currently disabled with bigjoiner
exactly for this reason), and DSB gamma updates. With DSB the problem
happens because the DSB itself will wait until the next start vblank
before starting to execute. So if the master pipe already finished its
commit and the DSB on the slave pipe is still waiting for the next
vblank we will assume the DSB as gotten stuck and terminate it.
Reversing the commit order should ameliarate this for the most part
as the master pipe is guaranteed to start its commit after the slave
pipe started. The one thing that can still screw us over is the fact
that we aren't necessarily going to commit the pipes in the reverse
order as the actual order is dictated by the DDB overlap avoidance.
But that can only happen while other pipes are being enabled/disabled,
and so in the normal steady state we should be safe.
The full fix will involve making the commit machinery aware of the
slave pipes and not finish their commits prematurely. But that
will involve a bit more work than this. And this commit order
reversal will still be beneficial to avoid userspace getting an
-EBUSY from the following page flip if the second pipe's commit
does stretch into the next frame.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-2-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Currently intel_modeset_pipe_config_late() is called after the
bigjoiner state copy, and it will actually not do anything for
bigjoiner slaves. This can lead to a mismatched state between
the master and slave.
The two things that we do in the encoder .compute_config_late()
hook are mst master transcoder and port sync master transcoder
elections. So if either of either MST or port sync is combined
with bigjoiner then we can see the mismatch.
Currently this problem is more or less theoretical; MST+bigjoiner
has not been implemented yet, and port sync+bigjoiner would
require a tiled display with >5k tiles (or a very high
dotclock per tile). Although we do have kms_tiled_display in
igt which can fake a tiled display, and we can now force bigjoiner
via debugfs, so it is possible to trigger this if you try hard
enough.
Reorder the code such that intel_modeset_pipe_config_late()
will be called before the bigjoiner state copy happens so
that both pipes will end up with the same state.
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-7-ville.syrjala@linux.intel.com
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change switch between non-VRR and VRR timings
generators on the fly, or even when sending the push to the
transcoder. For now just disable VRR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.
v2: Add a FIXME (Vandite)
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
All the users are in display, move the fixed point header under
display. We could also consider making these more general purpose
things, but that takes a bunch more effort. This allows the immediate
cleanup of xe compat i915_fixed.h.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/320c451e116c7807e544a50c67ba79b087a4f218.1712345787.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unify enabling and disabling of psr/panel replay for a sink. Modify
intel_psr_enable_sink accordingly and use it for both cases.
v3:
- move psr2_su_region_et_valid to be check for PSR2 only
v2:
- enable panel replay for sink before link training
- write ALPM_CONFIG only for PSR
- add DP_PSR_CRC_VERIFICATION only for PSR
- take care of disable sink as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-8-jouni.hogander@intel.com
Bspec is saying this
mask register: Only PSR_MASK[Mask FBC modify] and PSR_MASK[Mask Hotplug]
are used in panel replay mode.
Status register: Only SRD_STATUS[SRD state] field is used in panel replay
mode.
Due to this stop writing and reading registers and bits not used by panel
replay if panel replay is used.
Bspec: 53370, 68920
v2:
- use intel_dp_is_edp with PSR_MASK register
- handle LunarLake as well
- hanle ALPM configuration as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-7-jouni.hogander@intel.com
On HPD interrupt we want to check if the reason for HPD was some panel
replay error detected by monitor/panel. This is already done for PSR. We
want to do this for panel replay as well. Modify intel_psr_short_pulse to
support panel replay as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-6-jouni.hogander@intel.com
Currently panel replay is supporting only main link on mode -> Do not
update phy power state for non-eDP panel replay.
Bspec: 53370
v2: use intel_dp_is_edp to differentiate
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-5-jouni.hogander@intel.com
Current code is setting only intel_crtc_state->has_panel_replay in panel
replay case. There are lots of stuff behind intel_crtc_state->has_psr that
is needed for panel replay as well. Instead of converting each check to
has_psr || has_panel_replay set has_psr in case of panel replay as
well. Code can then differentiate between psr and panel replay by using
intel_crtc_state->has_panel_replay.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-3-jouni.hogander@intel.com
We are adding more boolean variable into intel_psr and intel_crtc_state
structs. Add some documentation about these for sake of clarity.
v2: Modify has_psr + has_panel_replay to mean panel replay
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113602.992714-2-jouni.hogander@intel.com
Currently intel_connector_info(), which prints the per-connector
output for i915_display_info, just bails out early if the connector
doesn't have a current encoder. That leads to very confusing output
where some of your connected (and properly detected) outputs appear
to have no enumerated modes.
Get rid of the encoder stuff and just rely on the connector itself
so that the output is always consistent.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329012331.29281-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Initialize HDCP capability variables to false to avoid UBSAN
warning in boolean value as some functions invoking this could
return without filling the two capability values.
--v2
-Fix Typo [Chaitanya]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401030106.274787-2-suraj.kandpal@intel.com
if the new dbuf slices are a superset of the old
dbuf slices then we don't have to do anything in
intel_dbuf_post_plane_update(). Restructure the code
to skip such redundant dbuf slice updates. The main
benefit is slightly less confusing logs.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-15-ville.syrjala@linux.intel.com
Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
The full mbus/cdclk sequence will look as follows:
1. disable pipes
2. increase cdclk if necessary
2.1 reprogram cdclk
2.2 update dbuf tracker value
3. enable mbus joining if necessary
3.1 update mbus_ctl
3.2 update dbuf tracker value
4. reallocate dbuf for planes on active pipes
5. disable mbus joining if necessary
5.1 update dbuf tracker value
5.2 update mbus_ctl
6. enable pipes
7. decrease cdclk if necessary
7.1 update dbuf tracker value
7.2 reprogram cdclk
And in order to keep things in sync we need:
Step 2:
- mbus_join == old
- mdclk/cdclk ratio == new
Step 3:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 5:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 7:
- mbus_join == new
- mdclk/cdclk ratio == new
v2: - Removed redundant parentheses(Ville Syrjälä)
- Constified new_crtc_state in intel_mbus_joined_pipe(Ville Syrjälä)
- Removed pipe_select variable(Ville Syrjälä)
[v3: vsyrjala: Correctly sequence vs. cdclk updates,
properly describe the full sequence,
shuffle code around to make the diff more legible,
streamline a few things]
[v4: vsyrjala: Move the intel_cdclk_is_decreasing_later() stuff
to a separate patch]
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v3
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-13-ville.syrjala@linux.intel.com
The current cdclk/mbus programming sequence is as follows:
1. intel_set_cdclk_pre_plane_update()
2. update_mbus_pre_enable()
3. intel_set_cdclk_post_plane_update()
when the actual mdclk/cdclk programming is postponed to
intel_set_cdclk_post_plane_update() we must keep using
the old mdclk/cdclk ratio during update_mbus_pre_enable().
This guarantees the programmed ratio matches the rest of
the hardware state (mdlk/cdclk/mbus joining).
v2: Extracted from the vblank synchronized mbus programming patch
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-12-ville.syrjala@linux.intel.com
In order to make sure we are not breaking the proper sequence
let's do updates step by step and don't change MBUS join value
during MDCLK/CDCLK programming stage.
MBUS join programming would be taken care by pre/post ddb hooks.
v2: - Reworded comment about using old mbus_join value in
intel_set_cdclk(Ville Syrjälä)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[v3: vsyrjala: rebase on top of cdclk changes, reword a bit more]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-11-ville.syrjala@linux.intel.com
Add some debugs so that we can actually observe what is
actually happening during the mbus/dbuf programming steps.
We can just shove them into fairly low level functions as
none of them are called during any critical sections/etc.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-10-ville.syrjala@linux.intel.com
Extract the stuff that writes the dbuf/mbus ratio stuff
into its own function. Will help with correctly sequencing
the operations done during mbus programming.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-9-ville.syrjala@linux.intel.com
Extact the stuff that writes the joining bits in MBUS_CTL
into its own function. Will help with correctly sequencing
the operations done during mbus programming.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-8-ville.syrjala@linux.intel.com
intel_mbus_dbox_update() will become static soon. Relocate it
into a place that avoids having to add a forward declaration
for it.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-7-ville.syrjala@linux.intel.com
We need to loop through all active pipes, not just the ones, that
are in current state, because disabling and enabling even a particular
pipe affects credits in another one.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-6-ville.syrjala@linux.intel.com
Currently we just get a plain "Changing CDCLK to ..." in the
logs. It would actually be interesting to see whether we're
doing the programming during the pre or post plane phase of
the commit. Include that information in the debug message.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-5-ville.syrjala@linux.intel.com
No one ever figured out why bumping the cdclk helped
with whatever issue we were having at the time.
Remove the hacks and start from scratch so that we
can actually see if any problems still remain.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-4-ville.syrjala@linux.intel.com
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
Compute vrr_vsync_start/end, which sets the position
for hardware to send the Vsync at a fixed position
relative to the end of the Vblank.
--v2:
- Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit)
- Updated bit fields of VRR_VSYNC_START/END. (Ankit)
--v3:
- Add PIPE_CONF_CHECK_I(vrr.vsync_start/end).
- Read/write vrr_vsync params only when we intend to send
adaptive_sync sdp.
--v4:
- Use VRR_SYNC_START/END macros correctly.
--v5:
- Send AS SDP only when VRR is enabled.
--v6:
- Add TRANS_VRR_VSYNC before enabling VRR as per bspec. (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-9-mitulkumar.ajitkumar.golani@intel.com
Add necessary function definitions to compute AS SDP data.
The new intel_dp_compute_as_sdp function computes AS SDP
values based on the display configuration, ensuring proper
handling of Variable Refresh Rate (VRR).
--v2:
- Added DP_SDP_ADAPTIVE_SYNC to infoframe_type_to_idx(). [Ankit]
- Separated patch for intel_read/write_dp_sdp. [Ankit]
- _HSW_VIDEO_DIP_ASYNC_DATA_A should be from ADL onward. [Ankit]
- Fixed indentation issues. [Ankit]
--v3:
- Added VIDEO_DIP_ENABLE_AS_HSW flag to intel_dp_set_infoframes.
--v4:
- Added HAS_VRR check before writing AS SDP.
--v5:
Added missed HAS_VRR check before reading AS SDP.
--v6:
- Used Adaptive Sync sink status as a check for read/write SDP. (Ankit)
--v7:
- Remove as_sdp_enable from crtc_state.
- Add a comment mentioning current support of
DP_AS_SDP_AVT_FIXED_VTOTAL.
- Add state checker for AS_SDP infoframe enable.
--v8:
- Drop conn_state from intel_dp_compute_as_sdp, as not used.
- Remove fullstop in subject line.
--v9:
- Add vrr.enable instead of is_in_vrr_range.
--v10:
- remove vrefresh and connector, as they are no longer required.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-7-mitulkumar.ajitkumar.golani@intel.com
Add the necessary structures and functions to handle reading and
unpacking Adaptive Sync Secondary Data Packets. Also add support
to write and pack AS SDP.
--v2:
- Correct use of REG_BIT and REG_GENMASK. [Jani]
- Use as_sdp instead of async. [Jani]
- Remove unrelated comments and changes. [Jani]
- Correct code indent. [Jani]
--v3:
- Update definition names for AS SDP which are starting from
HSW, as these defines are applicable for ADLP+.(Ankit)
--v4:
- Remove as_sdp_mode from crtc_state.
- Drop metadata keyword.
- For consistency, update ADL_ prefix or post fix as required.
--v5:
- Check if AS_SDP bit is set in crtc_state->infoframes.enable. If not
return.
- Check for HAS_AS_SDP() before setting VIDEO_DIP_ENABLE_AS_ADL mask.
--v6:
- Rename intel_read_dp_infoframe_as_sdp to intel_read_dp_as_sdp.
--v7:
- Add read back for length and vtotal correction.
--v8:
- Use as_sdp->target_rr & 0xFF.
- Shift by 8 instead of 32, and drop casting to u64.
- Remove changes which are does not belong to this patch.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-5-mitulkumar.ajitkumar.golani@intel.com
Add structure representing Adaptive Sync Secondary Data Packet (AS SDP).
Also, add Adaptive Sync SDP logging in drm_dp_helper.c to facilitate
debugging.
--v2:
- Update logging. [Jani, Ankit]
- Use 'as_sdp' instead of 'async' [Ankit]
- Correct define placeholders to where they are actually used. [Jani]
- Update members in 'as_sdp' structure to make it uniform. [Jani]
--v3:
- Added changes to dri-devel mailing list. No code changes.
--v4:
- Instead of directly using operation mode, use an enum to accommodate
all operation modes (Ankit).
--v5:
Nit-pick changes to commit message.
--v6:
- Add correct place holder and name change for AS_SDP_OP_MODE.
- Separate i915 changes from drm changes.
- Remove extra lines.
--v7:
- Add drm/dp in subject line (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-3-mitulkumar.ajitkumar.golani@intel.com
Add an API that indicates support for Adaptive Sync SDP in
the sink, which can be utilized by the rest of the DP programming.
--v1:
- Format commit message properly.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-2-mitulkumar.ajitkumar.golani@intel.com
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
