IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There are four modes, and each mode has a table of registers.
Some of the registers are common to all modes, so create new
tables for these common registers to reduce duplicate code.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Using the u64 v4l2_dbg_register.val directly can lead to unexpected
results depending on machine endianness. Fix this by using a local
variable which is assigned afterwards. Since tc358746_read() will init
the val variable to 0 we can assing it without checking the return value
first.
Addresses-Coverity-ID: 1527256 ("Integer handling issues")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently we ignore the return value of tc358746_read() and return
alawys return 0 which is wrong. Fix this by returning the actual return
value of the read operation which is either 0 on success or an error
value.
Addresses-Coverity-ID: 1527254 ("Error handling issues")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It was intended to return an error if tc358746_update_bits() call fail.
Fix this by storing the return code.
Addresses-Coverity-ID: 1527252 ("Control flow issues")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The power-up GMSL link configuration is controlled by the HIM and BWS
pins, whose state is reflected in register 0x1c. Print the detected
power-up config in a debug message to help debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
GMSL can transport three synchronization signals: VSync, HSync and Data
Enable. The MAX9286 can select either HS or DE as a line valid signal.
Not all serializers (and transmission formats) support the DE signal.
The MAX9271, used by the RDACM20 and RDACM21 cameras, doesn't document
DE support. Nonetheless, the max9286 driver selects the DE signal as
line valid in register 0x0c (by not setting the DESEL bit). It's not
clear why this works. As HS is a more common line valid qualifier, set
the DESEL bit by default. This is needed to support the onsemi MARS
cameras.
If a camera requires usage of the DE signal in the future, this will
need to be made configurable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org> # On Eagle V3M with RDACM20
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The GMSL serial data bus width is normally selected through the BWS pin.
On some systems, the pin may not be wired to the correct value. Support
overriding the bus width by software, using the value specified in the
device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Read the maxim,i2c-clock-frequency DT property that specifies the speed
of the remote I2C bus, and configure the MAX9286 accordingly. The remote
serializers must all have a matching configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for 12-bit raw bayer formats to the driver, configuring the
GMSL format accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MAX9286_DATATYPE_RAW11 value is used to configure the MAX9286 for
11-bit or 12-bit input data. While 11-bit data is supported on the GMSL
side, CSI-2 doesn't have a RAW11 format. 11-bit data is transferred over
CSI-2 as RAW12. Rename the macro accordingly to avoid confusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MAX9286 can generate a framesync signal to synchronize the cameras,
using an internal timer. Support this mode of operation and configure it
through the .s_frameinterval() operation. If the frame interval is not
0, framesync is switched to manual mode with the specified interval,
otherwise automatic mode is used.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Allow users to use one PoC regulator per port, instead of a global
regulator.
The properties '^port[0-3]-poc-supply$' in the DT node are used to
indicate the regulators for individual ports.
Signed-off-by: Thomas Nizan <tnizan@witekio.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
[hverkuil: remove obsolete kerneldoc 'id' documentation]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tag branch
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree: (31 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this. Get
GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes one of the last uses of of_get_gpio_flags().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver was until the previous patch unused in the kernel
and depended on platform data that no board was defining.
As no users can be proven to exist, delete the driver.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this and the
whole platform data mechanism.
Get GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER.
Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Don't populate the read-only array isl7998x_video_in_chan_map on the
stack but instead make it static. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If ov9282_power_on failed the I2C write, it returned without releasing
clocks or regulators. Fix this.
Fixes: 6f7def3d8a ("media: i2c: ov9282: Add selection for CSI2 clock mode")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
common_regs_list is only used within this file, so should
be static. Make it so.
Fixes: 7195aabf8f ("media: i2c: ov9282: Split registers into common and mode specific")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix missing documentation entries for members of structures,
as flagged by smatch.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In commit 3145efcdb4 ("media: ov5640: Rework timings programming"),
it defines max_fps field in ov5640_mode_info structure to store maximum
frame rate supported by each mode. But in ov5640_try_frame_interval(), it
assumes the maximum frame rate supported by all modes is 60. But actually,
only VGA support it. For others, the maximum frame rate supported is 30.
So correct it by taking the maximum frame rate supported by each mode as
the initialization value of the local variable maxfps.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
According to product brief they are identical from software point of view.
Differences are a different chief ray angle (CRA) and the package.
To distinguish ov9281 & ov9282 in userspace the name has to be explicitly
set. Provide a fixed string using platform data.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
current_link_freq field in ov5640_dev structure is link frequency,
not link frequency array index, so correct it.
Fixes: 3c28588f35 ("media: ov5640: Update pixel_rate and link_freq")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
DEFINE_RUNTIME_DEV_PM_OPS should be static.
This fixes this sparse warning:
drivers/media/i2c/tc358746.c:1671:1: warning: symbol 'tc358746_pm_ops' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for a privacy-led GPIO.
Making the privacy LED to controlable from userspace, as using the LED
class subsystem would do, would make it too easy for spy-ware to disable
the LED.
To avoid this have the sensor driver directly control the LED.
Link: https://lore.kernel.org/linux-media/20221129231149.697154-2-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit 9958d30f38 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
removes the config VIDEO_V4L2 as it is merged with config VIDEO_DEV.
Long after this change, commit 38fc5136ac ("media: i2c: Add ov08x40 image
sensor driver") introduces and refers to the removed config VIDEO_V4L2,
basically making this driver impossible to build, test and use due to
dependencies that cannot be met.
Refer to config VIDEO_DEV instead to make this driver usable.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: 38fc5136ac ("media: i2c: Add ov08x40 image sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In commit ed5c2f5fd1 ("i2c: Make remove callback return void") drivers
were updated to remove the return value of the remove callback, and
return void.
The OV08x40 was added after this commit but was not compile tested at
the time due to a KConfig issue, and this warning was missed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38fc5136ac ("media: i2c: Add ov08x40 image sensor driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix some 'vgxy61_write_reg' return vars not being signed int.
Fix 'expo_long_max' not being initialized.
Handle 'pm_runtime_get_sync' call that can return 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Align some register and constant definitions using tab in place of
mixed tab+spaces.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ar0521_write_mode() function explicitly programs the exposure time
register and the test pattern register, which are now setup by the call
to __v4l2_ctrl_handler_setup() in ar0521_set_stream().
Removing those register writes from ar0521_write_mode() reduces the
function to two operations: geometry configuration and pll
configuration.
Move geomerty configuration in the ar0521_set_stream() caller and rename
ar0521_write_mode() to ar0521_pll_config().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Setup all the registered controls at s_stream(1) time instead of
manually configure gains.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adjust the control limits for V4L2_CID_VBLANK, V4L2_CID_HBLANK and
V4L2_CID_EXPOSURE when a new format is applied to the sensor.
Update the exposure control limits when a new blanking value is
applied and change the controls initialization to use valid values for the
default format.
The exposure control default value is changed to report the default
value of register 0x3012.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for V4L2_CID_LINK_FREQ which currently reports a single
hard-coded frequency which depends on the fixed pixel clock.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Refuse unsupported controls by returning -EINVAL in the s_ctrl
operation. While at it, remove a the default switch case in the first
switch as it effectively is now a no-op.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rework the PLL computation procedure to take into account the currently
configured format bpp and the number of data lanes.
Comment the PLL configuration procedure with information provided by the
sensor chip manual and remove the hardcoded divider from the pixel clock
calculation.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Change the largest visibile resolution to 2592x1944, which corresponds
to the active pixel array area size. Take into account the horizontal
and vertical limits when programming the visible sizes to skip
dummy/inactive pixels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for V4L2_CID_ANALOG_GAIN. The control programs the global
gain register which applies to all color channels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MT9P006 sensor driver sporadically fails to probe because the sensor
responds with a NACK condition to I2C address on the bus during an attempt
to read the sensor MT9P031_CHIP_VERSION register in mt9p031_registered().
Neither the MT9P006 nor MT9P031 datasheets are clear on reset signal timing.
Older MT9M034 [1] datasheet provides those timing figures in Appendix-A and
indicates it is necessary to wait 850000 EXTCLK cycles before starting any
I2C communication.
Add such a delay, which does make the sporadic I2C NACK go away, so it is
likely similar constraint applies to this sensor.
[1] https://www.onsemi.com/pdf/datasheet/mt9m034-d.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9p031_init_cfg() already calls __mt9p031_get_pad_crop(), which
correctly calls v4l2_subdev_get_try_crop() on V4L2_SUBDEV_FORMAT_TRY
or returns &mt9p031->crop on V4L2_SUBDEV_FORMAT_ACTIVE. No need to
call v4l2_subdev_get_try_crop() in mt9p031_init_cfg() again in case
of both V4L2_SUBDEV_FORMAT_TRY and V4L2_SUBDEV_FORMAT_ACTIVE.
This also fixes a splat generated by this call since commit
2ba3e38517 ("media: v4l: subdev: Fail graciously when getting try data for NULL state")
because v4l2_subdev_get_try_crop() is called with sd_state = NULL
in mt9p031_init_cfg().
Fixes: 69681cd041 ("media: mt9p031: Move open subdev op init code into init_cfg")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor takes 3 supply rails - AVDD, DVDD, and DOVDD.
Add hooks into the regulator framework for each of these
regulators.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Previously regulators were enabled on probe and never again.
However, as regulators are disabled on power off. After a second power off
the regulator counter will underflow. Plus regulators are not required
for probing the sensor, but for streaming.
Fix this by enabling regulators on power on to balance regulator counter
properly.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of 'if (!ret)' switch to "check for the error first" rule.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Switch to use dev_err_probe() to simpify error path and unify message
template.
While at it, add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In some cases it might hide real bugs, in most cases here it's just
redundant as it's being reassigned immediately after initial assignment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
fwnode API does proper checks and returns correct codes, no need
to repeat it in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The struct i2c_client pointer is used only to get driver data,
associated with a struct device or print messages on behalf.
Moreover, the very same pointer to a struct device is already
assigned by a regmap and can be retrieved from there.
No need to keep a duplicative pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Still there are archs/platforms which do not support the common clk
framework. If such a platform is used in combination with the module
enabled the compiler will throw an error. Since the clock has stubs if
not selected we can drop it, so it is up to the arch/platform to select
the correct clock framework.
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
<linux/lcm.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCY3toaQAKCRBrQl33mxwe
dpoQAP4r5trvhHqB/9BLDYn+AwnXOewgywAoD8zBPntAL/WuBwD9HGmnwpJhGdXU
ImIEVNqjGmH9gLJjqNHPm4t4YvxgBAg=
=ZV3Y
-----END PGP SIGNATURE-----
Merge tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree into media_stage
Despite being big, the changes here are trivial: they just change the
probing method for I2C. So, apply it as a merge.
Tag branch
* tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree: (96 commits)
media: v4l2-core/tuner-core: Convert to i2c's .probe_new()
media: usb: go7007: s2250-board: Convert to i2c's .probe_new()
media: tuners/tua9001: Convert to i2c's .probe_new()
media: tuners/tda18250: Convert to i2c's .probe_new()
media: tuners/tda18212: Convert to i2c's .probe_new()
media: tuners/qm1d1c0042: Convert to i2c's .probe_new()
media: tuners/qm1d1b0004: Convert to i2c's .probe_new()
media: tuners/mxl301rf: Convert to i2c's .probe_new()
media: tuners/mt2060: Convert to i2c's .probe_new()
media: tuners/m88rs6000t: Convert to i2c's .probe_new()
media: tuners/fc2580: Convert to i2c's .probe_new()
media: tuners/e4000: Convert to i2c's .probe_new()
media: vidtv: Convert to i2c's .probe_new()
media: radio/tef6862: Convert to i2c's .probe_new()
media: radio/saa7706h: Convert to i2c's .probe_new()
media: radio/radio-tea5764: Convert to i2c's .probe_new()
media: i2c/wm8775: Convert to i2c's .probe_new()
media: i2c/wm8739: Convert to i2c's .probe_new()
media: i2c/vs6624: Convert to i2c's .probe_new()
media: i2c/vpx3220: Convert to i2c's .probe_new()
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As noted in the headers for V4L2_SUBDEV_FL_HAS_EVENTS,
"controls can send events, thus drivers exposing controls
should set this flag".
This driver exposes controls, but didn't reflect that it
could generate events. Correct this, and add the default
event handler functions.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor supports 8 or 10 bit readout modes, but the
driver only supported 10 bit.
Add 8 bit readout.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As required by libcamera, add the relevant cropping targets
to report which portion of the sensor is being read out in
any mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There's no reason why HBLANK has to be read-only as it
only changes the TIMING_HTS register in the sensor.
Remove the READ_ONLY flag, and add the relevant handling
for it.
The minimum value also varies based on whether continuous clock
mode is being used or not, so allow hblank_min to depend on
that.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adds support for V4L2_CID_HFLIP and V4L2_CID_VFLIP to allow
flipping the image.
The driver previously enabled H & V flips in the register table,
therefore the controls default to the same settings to avoid
changing the behaviour.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Programming the sensor with TIMING_VTS (aka LPFR) was done
when triggered by a change in exposure or gain, but not
when V4L2_CID_VBLANK was changed. Dynamic frame rate
changes could therefore not be achieved.
Separate out programming TIMING_VTS so that it is triggered
by set_ctrl(V4L2_CID_VBLANK)
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use v4l2_ctrl_new_fwnode_properties to add V4L2_CID_CAMERA_ORIENTATION
and V4L2_CID_CAMERA_SENSOR_ROTATION.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor supports either having the CSI2 clock lane free
running, or gated when there is no packet to transmit.
The driver only selected gated (non-continuous) clock mode.
Add code to allow fwnode to configure whether the clock is
gated or free running.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The configured vblank_min setting of 151 (meaning VTS of
720 + 151 = 871) is far higher than the setting that works on
the sensor, and there are no obvious restrictions stated in the
datasheet.
Reduce the vblank_min to allow for faster frame rates.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The calculations from pixel rate, width+hblank, and height+vblank
do not give the correct framerate - it's half the speed it should
be.
The datasheet lists the default for the TIMING_HTS registers (0x380c/d)
as being 0x2d8 (728) which is less than the width of the image, so
the units clearly can't be pixels.
If TIMING_HTS is considered to be units of 2-pixels, then the
resulting value of 0x5b0 (1456) makes all the calculations correct.
This driver is reporting an HBLANK value of 250, with an image width
of 1280, so TIMING_HTS is 1530 (0x5fa) pixels. However it was also
setting the register to 0x5fa, thereby not taking into account it
being units of 2-pixels.
Correct the register value to 0x2fd so that all the timing calculations
give the correct results.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver currently has multiple assumptions that there is
only one supported mode.
Convert supported_mode to an array, and fix up all references
to correctly look at that array.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pixel rate is determined by the PLL setup in the common
registers, not by the mode specific registers, therefore
remove it from the mode definition and define it for all modes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The format code is independent of mode, and each mode could
support both Y10 and Y8, so disassociate the code from the
mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently only one mode is supported, so all registers were
dropped in one list.
In preparation for adding more modes, split out the common registers
from those which configure the mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
TIMING_VTS (registers 0x380e/f), EXPOSURE (registers
0x3500/1/2), and GAIN (0x3509) are all set from
ov9282_update_exp_gain as part of the control handler,
therefore they do not need to be in the main list of
registers.
Remove them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure we call ov5645_entity_init_cfg() before registering the subdev
to make sure default formats are set up.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure we call the PM functions while s_stream(0) even in case of
errors in the code flow.
v4l2-core takes care of warning the user so no need to add a warning
message in the driver.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Switch to using runtime PM for power management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Sony imx577 uses the same silicon enabling reference code in the
available examples provided as the imx412.
Add in compatible strings to enable and differentiate the parts.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
imx412 and imx577 return the same chip-id when interrogated via i2c.
I've confirmed this myself by
Sakari suggested we should add a new compat which should be reflected in
the name of the media entity
https://patchwork.kernel.org/project/linux-media/patch/20220607134057.2427663-3-bryan.odonoghue@linaro.org/#24894500
Set up the .data parameter of of_device_id to pass a string which
we use to set the media entity name. Once done we can add in imx577 as a
compatible chips with the media names reflecting the directed compat string.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
