IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
An example adding an async sub-device to a V4L2 async notifier. The name
of the variable in error handling was wrong (asd vs. my_asd).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move the creation of the links between external sub-devices and ISP
sub-devices to the bound callback. This way we can also remove the need to
access the sub-device's notifier field that will soon be removed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The async notifier bound callback does a lot of checks that have probably
been always unnecessary. Remove the lookup of the async subev that we
already have, as well as the debug print that is already printed by the
framework.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2_async_nf_parse_fwnode_endpoints() function, part of
v4l2-fwnode.c, was a helper meant to register one async sub-dev for each
fwnode endpoint of a device.
The function is marked as deprecated in the documentation and is actually
not used anywhere anymore. Drop it and remove the helper function
v4l2_async_nf_fwnode_parse_endpoint() from v4l2-fwnode.c.
This change allows to make the helper function
__v4l2_async_nf_add_connection() visibility private to v4l2-async.c so
that there is no risk drivers can mistakenly use it.
[Sakari Ailus: Small fixups on top.]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit fe8a339783 ("media: mediatek: vcodec: Read HW active status
from syscon") allowed the driver to read the VDEC_SYS io space from a
syscon instead of from the reg property when reg-names are supplied.
However as part of that change, a smatch warning was introduced:
drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c:142 mtk_vcodec_get_reg_bases() error: buffer overflow 'mtk_dec_reg_names' 11 <= 11
With a correct Devicetree, that is, one that follows the dt-binding, it
wouldn't be possible to trigger such a buffer overflow. Even so, update
the range validation of the reg property, so that the smatch warning is
fixed and if an incorrect Devicetree is ever supplied the code errors
out instead of causing memory corruption.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Closes: https://lore.kernel.org/all/b5fd2dff-14a5-3ad8-9698-d1a50f4516fa@xs4all.nl
Fixes: fe8a339783 ("media: mediatek: vcodec: Read HW active status from syscon")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document missing fields. This resolves two warnings:
drivers/media/platform/qcom/venus/core.h:226: warning: Function parameter or member 'venus_ver' not described in 'venus_core'
drivers/media/platform/qcom/venus/core.h:501: warning: Function parameter or member 'enc_state' not described in 'venus_inst'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "lat_buf->private_data" needs to be set to NULL to prevent a
double free. How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.
The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {
Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array. This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.
Fixes: f77e89854b ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix av1 decode fail when iova is 36bit.
Decoder hardware will access incorrect iova address when tile buffer is
36bit, it will lead to iommu fault when hardware access dram data.
Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Xiaoyong Lu<xiaoyong.lu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove the requirement of a VDEC_SYS reg iospace for both MT8173 and
MT8183. To achieve that, rely on a vdecsys syscon to be passed through
the DT, and use it to directly read the VDEC_HW_ACTIVE bit during IRQ
handling to check whether the HW is active. Also update the VP8 stateful
decoder to use the syscon, if present, for writes to VDEC_SYS.
The old behavior is still present when reg-names aren't supplied, as
to keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added vdecsys_regmap kerneldoc line provided by Nicolas]
The VDEC_HW_ACTIVE bit is located at offset 0, bit 4 of the VDECSYS
iospace. Only the mask was previously defined, with the address being
implicit. Explicitly define the address, and append a '_MASK' suffix to
the mask, to make accesses to this bit clearer.
This commit brings no functional change.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The binding expects the first register space to be VDEC_SYS. However
this register space is already assigned to a different node on both
MT8173 and MT8183: a clock-controller node called 'vdecsys' which is
also a syscon.
In order to resolve the overlapping address ranges, remove the VDEC_SYS
register space from the video decoder, and add a new property to hold
the phandle to the syscon, so that iospace can still be handled.
Also add reg-names to be able to tell that this new register schema is
used, so the driver can keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On MT8183 it's not necessary to configure the parent for the clocks.
Remove the assigned-clocks and assigned-clock-parents from the required
list.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MT8173 and MT8183 have different clocks, and consequently clock-names.
Relax the number of clocks and set clock-names based on compatible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is intended to print the error code but there is a typo so it
prints IS_ERR() instead of PTR_ERR().
Fixes: 77f3b023f452 ("media: mediatek: vcodec: Add debugfs interface to get debug information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The list iterator "dbgfs_inst" is always non-NULL. This means that the
test for NULL inside the loop is unnecessary and it also means that the
test for NULL outside the loop will not work. If we do not find the item
on the list with the correct the ctx_id then it will free invalid memory
leading to a crash.
Fixes: cd403a6a0419 ("media: mediatek: vcodec: Add a debugfs file to get different useful information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
using uninitialized value may introduce risk
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
null-checking of a pointor is suggested before dereferencing it
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
the firmware only support low latency mode for h264,
but firmware will notify an event to driver
when one frame is decoded,
if V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
and V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY is set to 0,
driver can display the decoded frame immediately.
Fixes: ffa331d9bf ("media: amphion: decoder implement display delay enable")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the work before cleanup in the mtk_jpeg_remove
CPU0 CPU1
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit f100ce3bbd ("media: verisilicon: Fix crash when probing
encoder") removed vpu_fmt from hantro_try_fmt(), since it was
initialized from vpu_dst_fmt, which may not be initialized, when TRY_FMT
is called. It was replaced by fmt, which is found using the pixelformat.
For the encoder, this changed the fmt to contain the raw format instead
of the coded format. The format constraints as of fmt->frmsize are only
valid for the coded format and are 0 for the raw formats. Therefore, the
size of a encoder OUTPUT device is constrained to 0 and the
v4l2-compliance tests for G_FMT, TRY_FMT, and SET_FMT fail.
Bring back vpu_fmt to use the coded format on an encoder OUTPUT device,
but initialize it using the currently set pixelformat on dst_fmt, which
is the coded format on an encoder.
Fixes: f100ce3bbd ("media: verisilicon: Fix crash when probing encoder")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Adhere to Linux kernel coding style. Removed redundant blank line.
Issue found by checkpatch.
Signed-off-by: Emma Christy <emma.t.christy@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The meson-vdec module loads firmware so add MODULE_FIRMWARE macros to
provide that information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
convert numbers into meaningful names,
then it can improve the log readability
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).
so reinit the vpu decoder if reqbufs output 0
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was completely unnecessary to use BUG in saa7164_s_frequency,
just return an error instead. This also solves a smatch error:
drivers/media/pci/saa7164/saa7164-encoder.c:388 saa7164_s_frequency() error: potentially dereferencing uninitialized 'tsport'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This tells sparse that tegra_vip_driver is actually used,
and so avoids this warning:
drivers/staging/media/tegra-video/vip.c:280:31: warning: 'tegra_vip_driver' defined but not used [-Wunused-variable]
280 | static struct platform_driver tegra_vip_driver = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not make any sense.
This also fixes this !CONFIG_OF error:
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:529:34: warning: 'sun6i_isp_of_match' defined but not used [-Wunused-const-variable=]
529 | static const struct of_device_id sun6i_isp_of_match[] = {
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Shijie has not been actively working on the driver,
his e-mail address is bouncing for quite awhile now.
remove him from the maintainer list here.
I do want to thank him for his work on the driver.
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The kernel already has a helper to print a hexdump of a small
buffer via pointer extension. Use that instead of open coded
variant.
In long term it helps to kill pr_cont() or at least narrow down
its use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix the following warning:
drivers/media/i2c/ds90ub913.c:488:9: warning: 'v' may be used uninitialized [-Wmaybe-uninitialized]
488 | ub913_write(priv, UB913_REG_GENERAL_CFG,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
489 | v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ds90ub913.c:477:12: note: 'v' was declared here
477 | u8 v, v1, v2;
| ^
Fix the warning by initializing the variable to 0. Proper error handling
here would be somewhat pointless, as we are just printing register
values, and the user will see an error about the failed i2c transaction.
Fixes: c158d0d4ff ("media: i2c: add DS90UB913 driver")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Closes: https://lore.kernel.org/all/a0180488-f7f5-8538-a8bb-52ae52912835@xs4all.nl/
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by kzalloc(). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CAL uses get_frame_desc to get the VC and DT for the incoming CSI-2
stream, but does it in a bit hacky way. Clean this up by implementing
.get_frame_desc to camera-rx, and calling that from cal.c.
No functional change intended.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Change TI CAL driver to use subdev state. No functional changes
(intended).
This allows us to get rid of the 'formats' field, as the formats are
kept in the state, and also the 'mutex' as we already have state locking.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
We don't do a proper job at freeing resources in cal_camerarx_create's
error paths.
Fix these, and also switch the phy allcation from kzalloc to
devm_kzalloc to simplify the code further.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Clean up the CAL drivers uses of mbus formats:
- Switch all YUV formats from 2X8 formats to 1X16, as those are what
should be used for CSI-2 bus.
- Drop 24 and 32 bit formats, as the driver doesn't support them (see
cal_ctx_pix_proc_config()).
- Switch RGB565_2X8_LE to RGB565_1X16 (for the same reason as for the
YUV formats) and drop RGB565_2X8_BE as it cannot be supported with
CSI-2.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained.
There is no reason to keep it in staging. The accompanying CSI bridge
driver that uses it is in drivers/media/platform/nxp as well.
One TODO is to get rid of csi_state's "state" and "lock" variables.
Especially make sure suspend/resume is working without them. That can
very well be worked on from the new location.
Also add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver
driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch.pl warning:
WARNING: Avoid multiple line dereference
in file ipu3-css.c
Signed-off-by: Nikolay Kyx <knv418@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When capturing 1600x900, system could crash when system memory usage is
tight.
The way to reproduce this issue:
1. Use 1600x900 to display on host
2. Mount ISO through 'Virtual media' on OpenBMC's web
3. Run script as below on host to do sha continuously
#!/bin/bash
while [ [1] ];
do
find /media -type f -printf '"%h/%f"\n' | xargs sha256sum
done
4. Open KVM on OpenBMC's web
The size of macro block captured is 8x8. Therefore, we should make sure
the height of src-buf is 8 aligned to fix this issue.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct i2c_driver::probe_new() is about to go away. Since I converted
all drivers below drivers/media use struct i2c_driver::probe, three more
drivers were added in the following commits that use .probe_new():
commit 6363db1c9d ("media: i2c: add DS90UB953 driver")
commit c158d0d4ff ("media: i2c: add DS90UB913 driver")
commit afe267f2d3 ("media: i2c: add DS90UB960 driver")
Switch these driver to use the probe callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use proper commit description style]
